arcade33 Posted July 28, 2016 Share Posted July 28, 2016 Yes, I'm sure. I checked. like that and here i'm under SIERRA , so 0x0002 is false , i must get 0x0042 Link to comment Share on other sites More sharing options...
kodal Posted July 29, 2016 Share Posted July 29, 2016 like that and here i'm under SIERRA , so 0x0002 is false , i must get 0x0042 Mine also vendor: 0x8086, device id: 0x0046, revision id: 0x0002 It's worked . After install kext to S/L/E. Before I installed to clover kexts folder . Thanks all.) Link to comment Share on other sites More sharing options...
krinen Posted August 3, 2016 Share Posted August 3, 2016 I am having an issue after I install these kexts for 10.11.6. I am installing the 4 kexts plus the FB. This is my layout El Capitan 10.11.6 Device ID:0042/0046 vendorID :0086 SingleLink > Normal > LW1 When I install and rebuild the cache, I reboot, using Clover if I leave 'Inject Intel' enabled it will boot to a white screen and just stay there. If I uncheck 'Inject Intel' it will boot to rebuild prebuild kernel has expired and sit there. However if I remove all IntelHD kexts it will boot once again Any ideas? Link to comment Share on other sites More sharing options...
Moorre Posted August 3, 2016 Share Posted August 3, 2016 krinen, you have to try kext patching by Clover on-the-fly. There are an example few posts upper. So, also you have to false/ Intel injection by Clover. But you have to add a _DSM method with needed info for correct injection (w/o blank screen). Link to comment Share on other sites More sharing options...
shewantsthed001 Posted August 16, 2016 Share Posted August 16, 2016 Hey guys, im new to the forum and new to hackintosh. i tried installed yosemite 10.10.1 on my ASUS U50F with core i3 M330 (arrandale) 4 GB RAM. i checked my display connector, its LVDS (icouldnt use live linux usb cuz it said intel_reg_dumper command not recognised but then i dug around my graphics card settings and found its lvds). i installed yosemite, set up an account, and like the guide mentioned, i installed all the other kexts first, then the kexts for graphics. i used Normal framebuffer LW1 my display res is lower than 1366*768 i tried the whole installation process like 10 times with different variations, like, one time i didnot install wifi and audio kexts, then i did not install clover or chamaleon bootloaders right away, etc. one time the graphics kext installed and at the login screen when i typed my password, there was spinning wheel forever so i thought maybe system didnot recognise my Graphics so i tried everything again with natit now. last combination i tried was i installed yosemite, loaded all the other kexts (wifi was working, audio was too), then installed clover bootloader, then rebooted and installed the graphics with natit (i read the guide on patching my DSDT but i think i wont be able to do that so used natit) and finally i was stuck on this. this is my verbose screen. please take a look and any help would be much appreciated. thank you! PS- most of the time it was spinning wheel forever so i thought natit was my best bet. Link to comment Share on other sites More sharing options...
arcade33 Posted August 16, 2016 Share Posted August 16, 2016 Hey guys, im new to the forum and new to hackintosh. i tried installed yosemite 10.10.1 on my ASUS U50F with core i3 M330 (arrandale) 4 GB RAM. i checked my display connector, its LVDS (icouldnt use live linux usb cuz it said intel_reg_dumper command not recognised but then i dug around my graphics card settings and found its lvds). i installed yosemite, set up an account, and like the guide mentioned, i installed all the other kexts first, then the kexts for graphics. i used Normal framebuffer LW1 my display res is lower than 1366*768 i tried the whole installation process like 10 times with different variations, like, one time i didnot install wifi and audio kexts, then i did not install clover or chamaleon bootloaders right away, etc. one time the graphics kext installed and at the login screen when i typed my password, there was spinning wheel forever so i thought maybe system didnot recognise my Graphics so i tried everything again with natit now. last combination i tried was i installed yosemite, loaded all the other kexts (wifi was working, audio was too), then installed clover bootloader, then rebooted and installed the graphics with natit (i read the guide on patching my DSDT but i think i wont be able to do that so used natit) and finally i was stuck on this. this is my verbose screen. please take a look and any help would be much appreciated. thank you! PS- most of the time it was spinning wheel forever so i thought natit was my best bet. you don't need natit with clover make usb stick with CLOVER SPECIAL EDITION http://www.insanelymac.com/forum/files/file/471-clover-v23k-special-edition/ before boot change your config.plist posted by mindietinha who is here :http://www.insanelymac.com/forum/topic/306606-el-capitan-on-intel-hd-graphics-arrandale-qeci/ in S/L/E of your key delete : AppleIntelHDGraphics.kext AppleIntelHDGraphicsFB.kext (if it's present ) boot in verbose , and post picture if you get a problem after install with kext wizard ( and maintenance)the kexts for your version of YOSEMITE HERE : http://www.insanelymac.com/forum/files/download/208-1st-gen-intel-hd-graphics-kexts/ REBOOT , that's all !!!! good hack Link to comment Share on other sites More sharing options...
shewantsthed001 Posted August 16, 2016 Share Posted August 16, 2016 you don't need natit with clover make usb stick with CLOVER SPECIAL EDITION http://www.insanelymac.com/forum/files/file/471-clover-v23k-special-edition/ before boot change your config.plist posted by mindietinha who is here :http://www.insanelymac.com/forum/topic/306606-el-capitan-on-intel-hd-graphics-arrandale-qeci/ in S/L/E of your key delete : AppleIntelHDGraphics.kext AppleIntelHDGraphicsFB.kext (if it's present ) boot in verbose , and post picture if you get a problem after install with kext wizard ( and maintenance)the kexts for your version of YOSEMITE HERE : http://www.insanelymac.com/forum/files/download/208-1st-gen-intel-hd-graphics-kexts/ REBOOT , that's all !!!! good hack but i dont have a mac or anyone who has a mac. is there a way around ? i tried making a usb with el capitan virtual machine but its too darn slow on my system. (and yes, i had deleted all the intel graphics kexts and installed the kexts relating to my version which was 10.10.1) also i forgot to mention, i configured to macbook pro 6,1 on clover. and is it possible to NOT go through the installation process over and over again ? like i tried to boot in safe mode but it gets stuck, i tried loading without caches bootflag but no matter what i do, i cant boot to desktop again and i have to go through installation from scratch. am i missing something any guide or anything? Link to comment Share on other sites More sharing options...
arcade33 Posted August 16, 2016 Share Posted August 16, 2016 but i dont have a mac or anyone who has a mac. is there a way around ? i tried making a usb with el capitan virtual machine but its too darn slow on my system. (and yes, i had deleted all the intel graphics kexts and installed the kexts relating to my version which was 10.10.1) also i forgot to mention, i configured to macbook pro 6,1 on clover. and is it possible to NOT go through the installation process over and over again ? like i tried to boot in safe mode but it gets stuck, i tried loading without caches bootflag but no matter what i do, i cant boot to desktop again and i have to go through installation from scratch. am i missing something any guide or anything? what is the installer you use to make your usb stick Link to comment Share on other sites More sharing options...
shewantsthed001 Posted August 16, 2016 Share Posted August 16, 2016 what is the installer you use to make your usb stick i used trans mac and the dmg was yosemite zone 10.10.1 i got it from a friend like 6 months ago. Link to comment Share on other sites More sharing options...
arcade33 Posted August 16, 2016 Share Posted August 16, 2016 i used trans mac and the dmg was yosemite zone 10.10.1 i got it from a friend like 6 months ago. you need somebody who have a real MAC i can't help you , i never make an install like you sorry the best way for you w'll be this installer if somebody can upload for you iso http://www.insanelymac.com/forum/files/file/600-macos-disk-creator/ my network is to slow to make upload but have tested in windows 10 and it works !!!! Link to comment Share on other sites More sharing options...
shewantsthed001 Posted August 17, 2016 Share Posted August 17, 2016 you need somebody who have a real MAC i can't help you , i never make an install like you sorry the best way for you w'll be this installer if somebody can upload for you iso http://www.insanelymac.com/forum/files/file/600-macos-disk-creator/ my network is to slow to make upload but have tested in windows 10 and it works !!!! oaky thanks anyway. ill try to get my hands on a mac from somebody. Link to comment Share on other sites More sharing options...
izobara Posted August 18, 2016 Share Posted August 18, 2016 Hi guys! This manual fully working on Acer Travelmate 5740Z with Intel Pentium P6100 & OS X 10.10.5 I start full QECI. Please add this model to topicstart list. Thank`s for your work!!! 1 Link to comment Share on other sites More sharing options...
everart Posted August 23, 2016 Share Posted August 23, 2016 Hi guys! This manual fully working on Acer 4739 with I3 370m & OS X 10.11.6 full QECI. And plus!!! Can I use 1440 x 900 in single because my native resolution is 1366 x 768? Link to comment Share on other sites More sharing options...
Edwin Moquete Posted August 27, 2016 Share Posted August 27, 2016 Hello. Can I use Clover's on-the-fly patching to boot El Capitan installer without deleting the IntelHDGraphics kexts? And other question, with El Capitan, do I need the Yosemite patch as well? For some reason I have never been able to get on-the-fly patching working with El Capitan, just end having a lot of artifacts. It works well on Yosemite. Thanks in advance. Link to comment Share on other sites More sharing options...
kodal Posted August 29, 2016 Share Posted August 29, 2016 Hello, It was work on 10.11.3 with this version kexts. After update to 10.11.6 dont work(glir... screen). With any of 10.11.6 and 10.11.3 kexts. What to do ? Link to comment Share on other sites More sharing options...
alih Posted August 30, 2016 Share Posted August 30, 2016 Hey I'm hoping someone can help me. I've got OS X 10.11.6 installed onto the Lenovo Thinkpad X201 (i7-620M). I can boot into the OS, and I know my display is LVDS single link (I checked using the intel dump in linux). Before downloading the patched kexts, I could only output to an external display (and the display was totally garbled and almost unusable). Regardless, I got past that and installed the patched kexts with Kext Utility. However, I don't think the Intel Graphics FB kext suits my system, so while my output is finally on the laptop itself, it's completely garbled. I'm no longer sure what to try next. Using the patched kexts LW2-4 gives me flashing lights as an output, so those don't work at all. Any help would be greatly appreciated! Link to comment Share on other sites More sharing options...
Mistakenly Posted September 13, 2016 Share Posted September 13, 2016 Hello! I have successfully installed Mavericks, Yosemite and El Capitan on an eMachines D732Z laptop. I have successfully enabled QE/CI . Thanks! Im waiting official fully working kext for Sierra! Keep up the good work! Edit: I've got an issue when using Clover as my boot loader. I tried using it but after selecting my Hard Drive it suddenly reboots with a kernel panic which I can't see as it only shows up for a split second. Im using Chameleon for now. Please help Hi guys! This manual fully working on Acer Travelmate 5740Z with Intel Pentium P6100 & OS X 10.10.5 I start full QECI. Please add this model to topicstart list. Thank`s for your work!!! Same processor and same (last) OS X version! Running El Capitan now! Haha Link to comment Share on other sites More sharing options...
vusun123 Posted September 13, 2016 Share Posted September 13, 2016 Hey I'm hoping someone can help me. I've got OS X 10.11.6 installed onto the Lenovo Thinkpad X201 (i7-620M). I can boot into the OS, and I know my display is LVDS single link (I checked using the intel dump in linux). Before downloading the patched kexts, I could only output to an external display (and the display was totally garbled and almost unusable). Regardless, I got past that and installed the patched kexts with Kext Utility. However, I don't think the Intel Graphics FB kext suits my system, so while my output is finally on the laptop itself, it's completely garbled. I'm no longer sure what to try next. Using the patched kexts LW2-4 gives me flashing lights as an output, so those don't work at all. Any help would be greatly appreciated! I used to help one guy on this forum with the same X201 as yours, use Natit.kext and Alternative LW1. If possible try changing FakeSMC ( use Rehabman's ) Link to comment Share on other sites More sharing options...
Mistakenly Posted September 15, 2016 Share Posted September 15, 2016 Just a quick question for you guys Is the El Capitan 10.11.6 graphics kext compatible with Sierra's GM Candidate version? Thanks! Link to comment Share on other sites More sharing options...
fguitar Posted September 23, 2016 Share Posted September 23, 2016 Good morning, test Kext of 10.11.6 in the Sierra and did not work, did not start the system. an error message: wait kext. something like this after I post the photo. Someone managed to make it work? Link to comment Share on other sites More sharing options...
arcade33 Posted September 23, 2016 Share Posted September 23, 2016 Good morning, test Kext of 10.11.6 in the Sierra and did not work, did not start the system. an error message: wait kext. something like this after I post the photo. Someone managed to make it work? it's working partially ( not full QE/CI ) remember that SIERRA need in the terminal : sudo spctl --assess --master-disable install your kexts with kext wizard repair permission by terminal and reboot !!!! Link to comment Share on other sites More sharing options...
datasone Posted September 23, 2016 Share Posted September 23, 2016 The LinkWidth patches won't work in Sierra. There is a new one for LinkWidth X1 only, if you were using LinkWidth X1 patch now you can try this. I have tested it on my ThinkPad X201i (SingleLink LinkWidth X1), using AppleIntelHDGraphicsFB.kext in Sierra(version 10.2.8/10.0.2) 498B8C24980600000FB65118C1E213418B766C09D64189766C89B00C000F00410B5668 81E1FFFFC7FF41894E6C89880C000F00498B8C2498060000418B56689081E2FFFFC7FF I think it should also work on DualLink LinkWidth X1. Sadly I don't know how to get LinkWidth X2~X4 to work with the changes in the new kext. Link to comment Share on other sites More sharing options...
Blaggah Posted September 24, 2016 Share Posted September 24, 2016 Need help with my portege r705-p25 graphics. I have CI working when I remove the AppleIntelHDGraphicsGA.plugin and AppleIntelHDGraphicsFB.kext. My hardware: portege r705-p25 i3-350m, 1366x768x32 1st gen intel hd graphics (8086:0046 rev 2) intel_reg_dump shows PCH_LVDS: 0x80300302 (enabled, pipe A, 18 bit, 1 channel) I have Niresh 10.9.0 osx installed. Tried all of alternate and alternate 2 LCD+VGA W1/2/3/4 but QE not enabled. Then tried patching DSDT (got 9 warnings, but not sure if anything is significant) and went through with trying alternate and alternate 2 again, but still nothing; the startup screen wheel spins then freezes. Don't know what else to do. Can someone looked at my patched dsdt and see if there's anything wrong with it? Is my PCH_LVDS: 0x80300302 makes a difference? Thanks. I have the same laptop as you only mine is the R705-p35 version. I've been fighting for years to get OS X to fully work on it, the furthest i could get it was 10.6.3 by using retail disk method. That was my entry to hackintoshing. I've finally gotten the laptop back from my cousin who finshed school and she gave it back to me and i'd like to get at least Mavericks 10.9.5 to run on it with full qe/ci. Any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
daddysweet Posted September 25, 2016 Share Posted September 25, 2016 Gateway NV55C with Intel i3-380m full working. Tank you very much. How about macOS Sierra? Link to comment Share on other sites More sharing options...
Mistakenly Posted September 25, 2016 Share Posted September 25, 2016 This one isn't a graphics related question, but still please answer it . I made a bootable usb via the createinstallmedia command line for Sierra, installed the clover boot loader and configured it properly but whenever I try to boot with it, it throws a kernel panic stating that it can't perform a kext scan as no kext summary was found! I haven't placed a single kext on the "kexts" folder on the EFI partition on my usb drive tho! Any help will greatly appreciated! Please help me Link to comment Share on other sites More sharing options...
Recommended Posts