[GUIDE] 1st Generation Intel HD Graphics QE/CI

[rizki_alkaf]

now i have el capitan.. 

but... all my usb ports are not working, they are usb 2.0. any help for this?

 

and, brightness slider also not working

[GhostRaider]

now i have el capitan..

but... all my usb ports are not working, they are usb 2.0. any help for this?

 

and, brightness slider also not working

So what do you have working then? And well Apple and I aren't forcing users to try a developer preview with so many bugs as stated in the release notes.

[mendietinha]

brightness works here. usb too, but cant recognize what i plug. only if i use smbios from the latest mbp models. but that way i dont have speedstep. so ill wait.

[mendietinha]

for those who have intel hd graphics 1º gen (arrandale) and want to dual boot yose and el cap at same time using the patch on the fly for both, follow the example of my config.plist. you can copy paste if you want.

 

basicaly adds the new patch needed for el cap without removing the yose one. no problems with compatibility.

 

all on the fly with clover...

config.plist intelhd10101011.zip

[rioeduardo]

The new SingleLink patch 1 for El Capitan framebuffer that you have posted earlier works. Great work as aways Giofrida!

 

 

Hi GhostRaider,

 

Where can I find The new SingleLink patch 1 for El Capitan framebuffer that you have posted earlier works?

 

And what app do you use to apply the kext? Kext Utility? because when I use Kext Utility v.2.6.4, it keeps syncing disk cache.

 

Thank you,

Rio

[mendietinha]

Hi GhostRaider,

 

Where can I find The new SingleLink patch 1 for El Capitan framebuffer that you have posted earlier works?

 

And what app do you use to apply the kext? Kext Utility? because when I use Kext Utility v.2.6.4, it keeps syncing disk cache.

 

Thank you,

Rio

 

try kext wyzard

[rioeduardo]

try kext wyzard

Thank you Mendietinha

 

and then, What IntelHD Kexts do you use? Do you use this (http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/page-63?do=findComment&comment=2146319)?

 

Thanks,

Rio

[mendietinha]

no kext. just the patch on the fly with clover. take a look at my config plist above.

[rioeduardo]

no kext. just the patch on the fly with clover. take a look at my config plist above.

Thank you Mendietinha! It works

[mendietinha]

Thank you Mendietinha! It works

 

good for you!

[nodisturb]

Thank you! I use normal and LCD+VGA 1 TOSHIBA C645-4140L run at fast is possible!

[mendietinha]

some good results here! very nice work, guys!

[Resset]

I anyone able to help me with getting my screen to work? here are my linux dump and EDID. I was using everything but after installing framebuffer kext I get white screen. Only VNC connection is available.
I was using pre-fixed kexts and HD Graphics patcher. WHen I remove framebuffer kext I get QE on VNC but screen is blank. When I install kext I gen white screen and no display identification via vnc. Also OS can't inject proper EDID. I see that my PC has LVDS connector enabled so it should work.

What's wrong?

 

Linux dump:

PGETBL_CTL: 0x00000008
INSTDONE_I965: 0xfffffffe

INSTDONE_1: 0xffffffff

CPU_VGACNTRL: 0x80000000 (disabled)

DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000

RR_HW_CTL: 0x00000000 (low 0, high 0)

FDI_PLL_BIOS_0: 0x082b3019

FDI_PLL_BIOS_1: 0x00000000

FDI_PLL_BIOS_2: 0x00000000

DISPLAY_PORT_PLL_BIOS_0: 0x0807012b

DISPLAY_PORT_PLL_BIOS_1: 0x00000000

DISPLAY_PORT_PLL_BIOS_2: 0x00000000

FDI_PLL_FREQ_CTL: 0x00053687

PIPEACONF: 0xc0000050 (enabled, active, pf-pd, rotate 0, 6bpc)

HTOTAL_A: 0x06030555 (1366 active, 1540 total)

HBLANK_A: 0x06030555 (1366 start, 1540 end)

HSYNC_A: 0x05b50575 (1398 start, 1462 end)

VTOTAL_A: 0x030b02ff (768 active, 780 total)

VBLANK_A: 0x030b02ff (768 start, 780 end)

VSYNC_A: 0x03080302 (771 start, 777 end)

VSYNCSHIFT_A: 0x00000000

PIPEASRC: 0x055502ff (1366, 768)

PIPEA_DATA_M1: 0x7e266666 (TU 64, val 0x266666 2516582)

PIPEA_DATA_N1: 0x00400000 (val 0x400000 4194304)

PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

PIPEA_DATA_N2: 0x00000000 (val 0x0 0)

PIPEA_LINK_M1: 0x00022222 (val 0x22222 139810)

PIPEA_LINK_N1: 0x00080000 (val 0x80000 524288)

PIPEA_LINK_M2: 0x00000000 (val 0x0 0)

PIPEA_LINK_N2: 0x00000000 (val 0x0 0)

DSPACNTR: 0xd8004400 (enabled)

DSPABASE: 0x00000000

DSPASTRIDE: 0x00001600 (88)

DSPASURF: 0x0427b000

DSPATILEOFF: 0x00000000 (0, 0)

PIPEBCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc)

HTOTAL_B: 0x031f027f (640 active, 800 total)

HBLANK_B: 0x03170287 (648 start, 792 end)

HSYNC_B: 0x02ef028f (656 start, 752 end)

VTOTAL_B: 0x020c01df (480 active, 525 total)

VBLANK_B: 0x00000000 (1 start, 1 end)

VSYNC_B: 0x01eb01e9 (490 start, 492 end)

VSYNCSHIFT_B: 0x00000000

PIPEBSRC: 0x027f01df (640, 480)

PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

PIPEB_DATA_N1: 0x00000000 (val 0x0 0)

PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

PIPEB_DATA_N2: 0x00000000 (val 0x0 0)

PIPEB_LINK_M1: 0x00000000 (val 0x0 0)

PIPEB_LINK_N1: 0x00000000 (val 0x0 0)

PIPEB_LINK_M2: 0x00000000 (val 0x0 0)

PIPEB_LINK_N2: 0x00000000 (val 0x0 0)

DSPBCNTR: 0x00004000 (disabled)

DSPBBASE: 0x00000000

DSPBSTRIDE: 0x00000000 (0)

DSPBSURF: 0x00000000

DSPBTILEOFF: 0x00000000 (0, 0)

PIPECCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc)

HTOTAL_C: 0x00000000 (1 active, 1 total)

HBLANK_C: 0x00000000 (1 start, 1 end)

HSYNC_C: 0x00000000 (1 start, 1 end)

VTOTAL_C: 0x00000000 (1 active, 1 total)

VBLANK_C: 0x00000000 (1 start, 1 end)

VSYNC_C: 0x00000000 (1 start, 1 end)

VSYNCSHIFT_C: 0x00000000

PIPECSRC: 0x00000000 (1, 1)

PIPEC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

PIPEC_DATA_N1: 0x00000000 (val 0x0 0)

PIPEC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

PIPEC_DATA_N2: 0x00000000 (val 0x0 0)

PIPEC_LINK_M1: 0x00000000 (val 0x0 0)

PIPEC_LINK_N1: 0x00000000 (val 0x0 0)

PIPEC_LINK_M2: 0x00000000 (val 0x0 0)

PIPEC_LINK_N2: 0x00000000 (val 0x0 0)

DSPCCNTR: 0x00000000 (disabled)

DSPCBASE: 0x00000000

DSPCSTRIDE: 0x00000000 (0)

DSPCSURF: 0x00000000

DSPCTILEOFF: 0x00000000 (0, 0)

PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)

PFA_CTL_2: 0x00007e80 (vscale 0.988281)

PFA_CTL_3: 0x00003f40 (vscale initial phase 0.494141)

PFA_CTL_4: 0x00007d54 (hscale 0.979126)

PFA_WIN_POS: 0x00000000 (0, 0)

PFA_WIN_SIZE: 0x00000000 (0, 0)

PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)

PFB_CTL_2: 0x00000000 (vscale 0.000000)

PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)

PFB_CTL_4: 0x00000000 (hscale 0.000000)

PFB_WIN_POS: 0x00000000 (0, 0)

PFB_WIN_SIZE: 0x00000000 (0, 0)

PFC_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)

PFC_CTL_2: 0x00000000 (vscale 0.000000)

PFC_CTL_3: 0x00000000 (vscale initial phase 0.000000)

PFC_CTL_4: 0x00000000 (hscale 0.000000)

PFC_WIN_POS: 0x00000000 (0, 0)

PFC_WIN_SIZE: 0x00000000 (0, 0)

PCH_DREF_CONTROL: 0x00001400 (cpu source disable, ssc_source enable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 disable, ssc4 disable)

PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)

PCH_DPLL_TMR_CFG: 0x0271186a

PCH_SSC4_PARMS: 0x00000000

PCH_SSC4_AUX_PARMS: 0x00000000

PCH_DPLL_SEL: 0x00000000 (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)

PCH_DPLL_ANALOG_CTL: 0x00008000

PCH_DPLL_A: 0x88040004 (enable, sdvo high speed no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk default 120Mhz, sdvo/hdmi mul 1)

PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)

PCH_FPA0: 0x00021009 (n = 2, m1 = 16, m2 = 9)

PCH_FPA1: 0x00021009 (n = 2, m1 = 16, m2 = 9)

PCH_FPB0: 0x00030f07 (n = 3, m1 = 15, m2 = 7)

PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)

TRANS_HTOTAL_A: 0x06030555 (1366 active, 1540 total)

TRANS_HBLANK_A: 0x06030555 (1366 start, 1540 end)

TRANS_HSYNC_A: 0x05b50575 (1398 start, 1462 end)

TRANS_VTOTAL_A: 0x030b02ff (768 active, 780 total)

TRANS_VBLANK_A: 0x030b02ff (768 start, 780 end)

TRANS_VSYNC_A: 0x03080302 (771 start, 777 end)

TRANS_VSYNCSHIFT_A: 0x00000000

TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

TRANSA_DATA_N1: 0x00000000 (val 0x0 0)

TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

TRANSA_DATA_N2: 0x00000000 (val 0x0 0)

TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)

TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)

TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)

TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)

TRANS_HTOTAL_B: 0x031f027f (640 active, 800 total)

TRANS_HBLANK_B: 0x03170287 (648 start, 792 end)

TRANS_HSYNC_B: 0x02ef028f (656 start, 752 end)

TRANS_VTOTAL_B: 0x020c01df (480 active, 525 total)

TRANS_VBLANK_B: 0x020401e7 (488 start, 517 end)

TRANS_VSYNC_B: 0x01eb01e9 (490 start, 492 end)

TRANS_VSYNCSHIFT_B: 0x00000000

TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

TRANSB_DATA_N1: 0x00000000 (val 0x0 0)

TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

TRANSB_DATA_N2: 0x00000000 (val 0x0 0)

TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)

TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)

TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)

TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)

TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)

TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)

TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)

TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)

TRANS_VBLANK_C: 0x00000044 (69 start, 1 end)

TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)

TRANS_VSYNCSHIFT_C: 0x00000000

TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

TRANSC_DATA_N1: 0x00000000 (val 0x0 0)

TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

TRANSC_DATA_N2: 0x00000000 (val 0x0 0)

TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)

TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)

TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)

TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)

TRANSACONF: 0xc0000040 (enable, active, progressive)

TRANSBCONF: 0x00000000 (disable, inactive, progressive)

TRANSCCONF: 0x00000000 (disable, inactive, progressive)

FDI_TXA_CTL: 0xb0044000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)

FDI_TXB_CTL: 0x301c4000 (disable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X4, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)

FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)

FDI_RXA_CTL: 0xb0022050 (enable, train pattern not train, port width X1, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, PCDClk)

FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)

FDI_RXC_CTL: 0x00000000 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing disable, RawClk)

DPAFE_BMFUNC: 0x00100040

DPAFE_DL_IREFCAL0: 0x00000060

DPAFE_DL_IREFCAL1: 0x0f810880

DPAFE_DP_IREFCAL: 0x00100040

PCH_DSPCLK_GATE_D: 0x100003a0

PCH_DSP_CHICKEN1: 0x00400000

PCH_DSP_CHICKEN2: 0x02600000

PCH_DSP_CHICKEN3: 0x00000000

FDI_RXA_MISC: 0x00000080 (FDI Delay 128)

FDI_RXB_MISC: 0x00000080 (FDI Delay 128)

FDI_RXC_MISC: 0x00000000 (FDI Delay 0)

FDI_RXA_TUSIZE1: 0x7e000000

FDI_RXA_TUSIZE2: 0x7e000000

FDI_RXB_TUSIZE1: 0x7e000000

FDI_RXB_TUSIZE2: 0x7e000000

FDI_RXC_TUSIZE1: 0x00000000

FDI_RXC_TUSIZE2: 0x00000000

FDI_PLL_CTL_1: 0x33505248

FDI_PLL_CTL_2: 0x00000000

FDI_RXA_IIR: 0x00000000

FDI_RXA_IMR: 0x000000ff

FDI_RXB_IIR: 0x00000000

FDI_RXB_IMR: 0x000000ff

PCH_ADPA: 0x00f40018 (disabled, transcoder A, +hsync, +vsync)

HDMIB: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected)

HDMIC: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected)

HDMID: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)

PCH_LVDS: 0x80300302 (enabled, pipe A, 18 bit, 1 channel)

CPU_eDP_A: 0x00000018

PCH_DP_B: 0x00000018

PCH_DP_C: 0x00000018

PCH_DP_D: 0x0000001c

TRANS_DP_CTL_A: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)

TRANS_DP_CTL_B: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)

TRANS_DP_CTL_C: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)

BLC_PWM_CPU_CTL2: 0x80000000 (enable 1, pipe A)

BLC_PWM_CPU_CTL: 0x00001266 (cycle 4710)

BLC_PWM_PCH_CTL1: 0x80000000 (enable 1, override 0, inverted polarity 0)

BLC_PWM_PCH_CTL2: 0x12660000 (freq 4710, cycle 0)

PCH_PP_STATUS: 0xc0000008 (on, ready, sequencing idle)

PCH_PP_CONTROL: 0xabcd0003 (blacklight disabled, power down on reset, panel on)

PCH_PP_ON_DELAYS: 0x01000900

PCH_PP_OFF_DELAYS: 0x00800900

PCH_PP_DIVISOR: 0x00186906

PORT_DBG: 0x00000000 (HW DRRS off)

RC6_RESIDENCY_TIME: 0xffffffff

RC6p_RESIDENCY_TIME: 0xffffffff

RC6pp_RESIDENCY_TIME: 0xffffffff

EDID:

"DisplayProductID" = 1815
"DisplayVendorID" = 1970170734

 

"IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/.Display_boot/display0/AppleDisplay-756e6b6e-717"

EDID ( Extended Display Identification Data) Report




Vendor/Product Identification:



    Monitor Name :     

    Monitor Serial Number :     

    Manufacturer Name :     Sony Corporation

    Product Id :     5FA

    Serial Number :     6

    Week Of Manufacture :     0

    Year Of Manufacture :     2002

    EDIDVersion :     V1.3

    Number Of Extension Flag :     0



Display parameters:



    Video Input Definition :     Digital Signal

    DFP1X Compatible Interface :     False

    Max Horizontal Image Size :     340 mm

    Max Vertical Image Size :     190 mm

    Max Display Size :     15.3 Inches



Power Management and Features:



    Standby :     Not Supported

    Suspend :     Not Supported

    ActiveOff :     Supported

    Video Input :     1

    sRGB Default ColorSpace :     True

    Default GTF :     Supported

    Prefered Timing Mode :     True



Gamma/Color and Etablished Timings:



    Display Gamma :     3.55

    Red :     x = 0.625 - y = 0.34

    Green :     x = 0.285 - y = 0.605

    Blue :     x = 0.148 - y = 0.062

    White :     x = 0.281 - y = 0.309



    Etablished Timings :     



    Display Type :     RGB Color Display



Standard Timing:





Preferred Detailed Timing:



    Pixel Clock :     72 Mhz



    Horizontal Active :     1366 pixels

    Horizontal Blanking :     174 pixels

    Horizontal Sync Offset :     32 pixels

    Horizontal Sync Pulse Width :     64 pixels

    Horizontal Border :     0 pixels

    Horizontal Size :     344 mm



    Vertical Active :     768 lines

    Vertical Blanking :     12 lines

    Vertical Sync Offset :     3 lines

    Vertical Sync Pulse Width :     6 lines

    Vertical Border :     0 lines

    Vertical Size :     194 mm



    Input Type :     Digital Separate

    Interlaced :     False

    VerticalPolarity :     False

    HorizontalPolarity :     False



Detailed Timing #2:



    Pixel Clock :     48.22 Mhz



    Horizontal Active :     1366 pixels

    Horizontal Blanking :     160 pixels

    Horizontal Sync Offset :     32 pixels

    Horizontal Sync Pulse Width :     64 pixels

    Horizontal Border :     0 pixels

    Horizontal Size :     344 mm



    Vertical Active :     768 lines

    Vertical Blanking :     22 lines

    Vertical Sync Offset :     3 lines

    Vertical Sync Pulse Width :     6 lines

    Vertical Border :     0 lines

    Vertical Size :     194 mm



    Input Type :     Digital Separate

    Interlaced :     False

    VerticalPolarity :     False

    HorizontalPolarity :     False



Monitor Range Limit:



    Maximum Vertical Frequency :     60 Hz

    Minimum Vertical Frequency :     0 Hz

    Maximum Horizontal Frequency :     161 KHz

    Minimum Horizontal Frequency :     0 KHz

    Maximum Pixel Clock :     80 MHz



Stereo Display:



    Stereo Display :     Normal display (no stereo)



RAW Data:



0x00     00 FF FF FF FF FF FF 00 4D D9 FA 05 06 00 00 00    

0x10     00 0C 01 03 80 22 13 FF 2F 00 00 A0 57 49 9B 26    

0x20     10 48 4F 00 00 00 01 01 01 01 01 01 01 01 01 01    

0x30     01 01 01 01 01 01 20 1C 56 AE 50 00 0C 30 20 40    

0x40     36 00 58 C2 10 00 00 18 D6 12 56 A0 50 00 16 30    

0x50     20 40 36 00 58 C2 10 00 00 18 00 00 00 00 00 00    

0x60     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FD    

0x70     00 00 3C 00 A1 08 00 00 00 00 00 00 00 00 00 5E    

[spike90]

Hey there,

 

I am trying to get the 1st gen Intel Graphics of my HP Elitebook 8440p running on Mavericks 10.9.5. I followed the guide for CI only cause the laptop uses eDP. After deleting the original kexts and installing the ones distributed in this thread + reboot, I end up with a completely unusable distorted screen. I already boot using Chameleon. Any suggestions? Don't know what to do..

 

Thanks

[mendietinha]

Hey there,

 

I am trying to get the 1st gen Intel Graphics of my HP Elitebook 8440p running on Mavericks 10.9.5. I followed the guide for CI only cause the laptop uses eDP. After deleting the original kexts and installing the ones distributed in this thread + reboot, I end up with a completely unusable distorted screen. I already boot using Chameleon. Any suggestions? Don't know what to do..

 

Thanks

 

have you try all the kext options?

[spike90]

have you try all the kext options?

Do you mean the various alternate framebuffers? Aren't they only available within the CI/QE Package?

 

I only have the following kext installed for AppleIntelHDGraphics* like suggested in the guide:

 

 

I also recognized this error while starting up:

 

 

Currently I don't have any framebuffer installed, as suggested in the guide (removed AppleIntelHDGraphicsFB.kext but got no replacement), the CI/QE framebuffer kexts likely won't work because they don't support displays attached via eDP. When using the original framebuffer shipped with 10.9.5 I got stuck on a black screen after boot. Trying the normal/alt1 of the CI/QE framebuffers also leaves me with a black screen.

[Resset]

 

I anyone able to help me with getting my screen to work? here are my linux dump and EDID. I was using everything but after installing framebuffer kext I get white screen. Only VNC connection is available.

I was using pre-fixed kexts and HD Graphics patcher. WHen I remove framebuffer kext I get QE on VNC but screen is blank. When I install kext I gen white screen and no display identification via vnc. Also OS can't inject proper EDID. I see that my PC has LVDS connector enabled so it should work.

 

What's wrong?

 

Linux dump:

PGETBL_CTL: 0x00000008
INSTDONE_I965: 0xfffffffe

INSTDONE_1: 0xffffffff

CPU_VGACNTRL: 0x80000000 (disabled)

DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000

RR_HW_CTL: 0x00000000 (low 0, high 0)

FDI_PLL_BIOS_0: 0x082b3019

FDI_PLL_BIOS_1: 0x00000000

FDI_PLL_BIOS_2: 0x00000000

DISPLAY_PORT_PLL_BIOS_0: 0x0807012b

DISPLAY_PORT_PLL_BIOS_1: 0x00000000

DISPLAY_PORT_PLL_BIOS_2: 0x00000000

FDI_PLL_FREQ_CTL: 0x00053687

PIPEACONF: 0xc0000050 (enabled, active, pf-pd, rotate 0, 6bpc)

HTOTAL_A: 0x06030555 (1366 active, 1540 total)

HBLANK_A: 0x06030555 (1366 start, 1540 end)

HSYNC_A: 0x05b50575 (1398 start, 1462 end)

VTOTAL_A: 0x030b02ff (768 active, 780 total)

VBLANK_A: 0x030b02ff (768 start, 780 end)

VSYNC_A: 0x03080302 (771 start, 777 end)

VSYNCSHIFT_A: 0x00000000

PIPEASRC: 0x055502ff (1366, 768)

PIPEA_DATA_M1: 0x7e266666 (TU 64, val 0x266666 2516582)

PIPEA_DATA_N1: 0x00400000 (val 0x400000 4194304)

PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

PIPEA_DATA_N2: 0x00000000 (val 0x0 0)

PIPEA_LINK_M1: 0x00022222 (val 0x22222 139810)

PIPEA_LINK_N1: 0x00080000 (val 0x80000 524288)

PIPEA_LINK_M2: 0x00000000 (val 0x0 0)

PIPEA_LINK_N2: 0x00000000 (val 0x0 0)

DSPACNTR: 0xd8004400 (enabled)

DSPABASE: 0x00000000

DSPASTRIDE: 0x00001600 (88)

DSPASURF: 0x0427b000

DSPATILEOFF: 0x00000000 (0, 0)

PIPEBCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc)

HTOTAL_B: 0x031f027f (640 active, 800 total)

HBLANK_B: 0x03170287 (648 start, 792 end)

HSYNC_B: 0x02ef028f (656 start, 752 end)

VTOTAL_B: 0x020c01df (480 active, 525 total)

VBLANK_B: 0x00000000 (1 start, 1 end)

VSYNC_B: 0x01eb01e9 (490 start, 492 end)

VSYNCSHIFT_B: 0x00000000

PIPEBSRC: 0x027f01df (640, 480)

PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

PIPEB_DATA_N1: 0x00000000 (val 0x0 0)

PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

PIPEB_DATA_N2: 0x00000000 (val 0x0 0)

PIPEB_LINK_M1: 0x00000000 (val 0x0 0)

PIPEB_LINK_N1: 0x00000000 (val 0x0 0)

PIPEB_LINK_M2: 0x00000000 (val 0x0 0)

PIPEB_LINK_N2: 0x00000000 (val 0x0 0)

DSPBCNTR: 0x00004000 (disabled)

DSPBBASE: 0x00000000

DSPBSTRIDE: 0x00000000 (0)

DSPBSURF: 0x00000000

DSPBTILEOFF: 0x00000000 (0, 0)

PIPECCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc)

HTOTAL_C: 0x00000000 (1 active, 1 total)

HBLANK_C: 0x00000000 (1 start, 1 end)

HSYNC_C: 0x00000000 (1 start, 1 end)

VTOTAL_C: 0x00000000 (1 active, 1 total)

VBLANK_C: 0x00000000 (1 start, 1 end)

VSYNC_C: 0x00000000 (1 start, 1 end)

VSYNCSHIFT_C: 0x00000000

PIPECSRC: 0x00000000 (1, 1)

PIPEC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

PIPEC_DATA_N1: 0x00000000 (val 0x0 0)

PIPEC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

PIPEC_DATA_N2: 0x00000000 (val 0x0 0)

PIPEC_LINK_M1: 0x00000000 (val 0x0 0)

PIPEC_LINK_N1: 0x00000000 (val 0x0 0)

PIPEC_LINK_M2: 0x00000000 (val 0x0 0)

PIPEC_LINK_N2: 0x00000000 (val 0x0 0)

DSPCCNTR: 0x00000000 (disabled)

DSPCBASE: 0x00000000

DSPCSTRIDE: 0x00000000 (0)

DSPCSURF: 0x00000000

DSPCTILEOFF: 0x00000000 (0, 0)

PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)

PFA_CTL_2: 0x00007e80 (vscale 0.988281)

PFA_CTL_3: 0x00003f40 (vscale initial phase 0.494141)

PFA_CTL_4: 0x00007d54 (hscale 0.979126)

PFA_WIN_POS: 0x00000000 (0, 0)

PFA_WIN_SIZE: 0x00000000 (0, 0)

PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)

PFB_CTL_2: 0x00000000 (vscale 0.000000)

PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)

PFB_CTL_4: 0x00000000 (hscale 0.000000)

PFB_WIN_POS: 0x00000000 (0, 0)

PFB_WIN_SIZE: 0x00000000 (0, 0)

PFC_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)

PFC_CTL_2: 0x00000000 (vscale 0.000000)

PFC_CTL_3: 0x00000000 (vscale initial phase 0.000000)

PFC_CTL_4: 0x00000000 (hscale 0.000000)

PFC_WIN_POS: 0x00000000 (0, 0)

PFC_WIN_SIZE: 0x00000000 (0, 0)

PCH_DREF_CONTROL: 0x00001400 (cpu source disable, ssc_source enable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 disable, ssc4 disable)

PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)

PCH_DPLL_TMR_CFG: 0x0271186a

PCH_SSC4_PARMS: 0x00000000

PCH_SSC4_AUX_PARMS: 0x00000000

PCH_DPLL_SEL: 0x00000000 (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)

PCH_DPLL_ANALOG_CTL: 0x00008000

PCH_DPLL_A: 0x88040004 (enable, sdvo high speed no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk default 120Mhz, sdvo/hdmi mul 1)

PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)

PCH_FPA0: 0x00021009 (n = 2, m1 = 16, m2 = 9)

PCH_FPA1: 0x00021009 (n = 2, m1 = 16, m2 = 9)

PCH_FPB0: 0x00030f07 (n = 3, m1 = 15, m2 = 7)

PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)

TRANS_HTOTAL_A: 0x06030555 (1366 active, 1540 total)

TRANS_HBLANK_A: 0x06030555 (1366 start, 1540 end)

TRANS_HSYNC_A: 0x05b50575 (1398 start, 1462 end)

TRANS_VTOTAL_A: 0x030b02ff (768 active, 780 total)

TRANS_VBLANK_A: 0x030b02ff (768 start, 780 end)

TRANS_VSYNC_A: 0x03080302 (771 start, 777 end)

TRANS_VSYNCSHIFT_A: 0x00000000

TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

TRANSA_DATA_N1: 0x00000000 (val 0x0 0)

TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

TRANSA_DATA_N2: 0x00000000 (val 0x0 0)

TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)

TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)

TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)

TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)

TRANS_HTOTAL_B: 0x031f027f (640 active, 800 total)

TRANS_HBLANK_B: 0x03170287 (648 start, 792 end)

TRANS_HSYNC_B: 0x02ef028f (656 start, 752 end)

TRANS_VTOTAL_B: 0x020c01df (480 active, 525 total)

TRANS_VBLANK_B: 0x020401e7 (488 start, 517 end)

TRANS_VSYNC_B: 0x01eb01e9 (490 start, 492 end)

TRANS_VSYNCSHIFT_B: 0x00000000

TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

TRANSB_DATA_N1: 0x00000000 (val 0x0 0)

TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

TRANSB_DATA_N2: 0x00000000 (val 0x0 0)

TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)

TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)

TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)

TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)

TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)

TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)

TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)

TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)

TRANS_VBLANK_C: 0x00000044 (69 start, 1 end)

TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)

TRANS_VSYNCSHIFT_C: 0x00000000

TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)

TRANSC_DATA_N1: 0x00000000 (val 0x0 0)

TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)

TRANSC_DATA_N2: 0x00000000 (val 0x0 0)

TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)

TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)

TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)

TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)

TRANSACONF: 0xc0000040 (enable, active, progressive)

TRANSBCONF: 0x00000000 (disable, inactive, progressive)

TRANSCCONF: 0x00000000 (disable, inactive, progressive)

FDI_TXA_CTL: 0xb0044000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)

FDI_TXB_CTL: 0x301c4000 (disable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X4, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)

FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)

FDI_RXA_CTL: 0xb0022050 (enable, train pattern not train, port width X1, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, PCDClk)

FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)

FDI_RXC_CTL: 0x00000000 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing disable, RawClk)

DPAFE_BMFUNC: 0x00100040

DPAFE_DL_IREFCAL0: 0x00000060

DPAFE_DL_IREFCAL1: 0x0f810880

DPAFE_DP_IREFCAL: 0x00100040

PCH_DSPCLK_GATE_D: 0x100003a0

PCH_DSP_CHICKEN1: 0x00400000

PCH_DSP_CHICKEN2: 0x02600000

PCH_DSP_CHICKEN3: 0x00000000

FDI_RXA_MISC: 0x00000080 (FDI Delay 128)

FDI_RXB_MISC: 0x00000080 (FDI Delay 128)

FDI_RXC_MISC: 0x00000000 (FDI Delay 0)

FDI_RXA_TUSIZE1: 0x7e000000

FDI_RXA_TUSIZE2: 0x7e000000

FDI_RXB_TUSIZE1: 0x7e000000

FDI_RXB_TUSIZE2: 0x7e000000

FDI_RXC_TUSIZE1: 0x00000000

FDI_RXC_TUSIZE2: 0x00000000

FDI_PLL_CTL_1: 0x33505248

FDI_PLL_CTL_2: 0x00000000

FDI_RXA_IIR: 0x00000000

FDI_RXA_IMR: 0x000000ff

FDI_RXB_IIR: 0x00000000

FDI_RXB_IMR: 0x000000ff

PCH_ADPA: 0x00f40018 (disabled, transcoder A, +hsync, +vsync)

HDMIB: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected)

HDMIC: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected)

HDMID: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)

PCH_LVDS: 0x80300302 (enabled, pipe A, 18 bit, 1 channel)

CPU_eDP_A: 0x00000018

PCH_DP_B: 0x00000018

PCH_DP_C: 0x00000018

PCH_DP_D: 0x0000001c

TRANS_DP_CTL_A: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)

TRANS_DP_CTL_B: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)

TRANS_DP_CTL_C: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)

BLC_PWM_CPU_CTL2: 0x80000000 (enable 1, pipe A)

BLC_PWM_CPU_CTL: 0x00001266 (cycle 4710)

BLC_PWM_PCH_CTL1: 0x80000000 (enable 1, override 0, inverted polarity 0)

BLC_PWM_PCH_CTL2: 0x12660000 (freq 4710, cycle 0)

PCH_PP_STATUS: 0xc0000008 (on, ready, sequencing idle)

PCH_PP_CONTROL: 0xabcd0003 (blacklight disabled, power down on reset, panel on)

PCH_PP_ON_DELAYS: 0x01000900

PCH_PP_OFF_DELAYS: 0x00800900

PCH_PP_DIVISOR: 0x00186906

PORT_DBG: 0x00000000 (HW DRRS off)

RC6_RESIDENCY_TIME: 0xffffffff

RC6p_RESIDENCY_TIME: 0xffffffff

RC6pp_RESIDENCY_TIME: 0xffffffff

EDID:

 

"DisplayProductID" = 1815

"DisplayVendorID" = 1970170734

 

"IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/.Display_boot/display0/AppleDisplay-756e6b6e-717"

EDID ( Extended Display Identification Data) Report




Vendor/Product Identification:



    Monitor Name :     

    Monitor Serial Number :     

    Manufacturer Name :     Sony Corporation

    Product Id :     5FA

    Serial Number :     6

    Week Of Manufacture :     0

    Year Of Manufacture :     2002

    EDIDVersion :     V1.3

    Number Of Extension Flag :     0



Display parameters:



    Video Input Definition :     Digital Signal

    DFP1X Compatible Interface :     False

    Max Horizontal Image Size :     340 mm

    Max Vertical Image Size :     190 mm

    Max Display Size :     15.3 Inches



Power Management and Features:



    Standby :     Not Supported

    Suspend :     Not Supported

    ActiveOff :     Supported

    Video Input :     1

    sRGB Default ColorSpace :     True

    Default GTF :     Supported

    Prefered Timing Mode :     True



Gamma/Color and Etablished Timings:



    Display Gamma :     3.55

    Red :     x = 0.625 - y = 0.34

    Green :     x = 0.285 - y = 0.605

    Blue :     x = 0.148 - y = 0.062

    White :     x = 0.281 - y = 0.309



    Etablished Timings :     



    Display Type :     RGB Color Display



Standard Timing:





Preferred Detailed Timing:



    Pixel Clock :     72 Mhz



    Horizontal Active :     1366 pixels

    Horizontal Blanking :     174 pixels

    Horizontal Sync Offset :     32 pixels

    Horizontal Sync Pulse Width :     64 pixels

    Horizontal Border :     0 pixels

    Horizontal Size :     344 mm



    Vertical Active :     768 lines

    Vertical Blanking :     12 lines

    Vertical Sync Offset :     3 lines

    Vertical Sync Pulse Width :     6 lines

    Vertical Border :     0 lines

    Vertical Size :     194 mm



    Input Type :     Digital Separate

    Interlaced :     False

    VerticalPolarity :     False

    HorizontalPolarity :     False



Detailed Timing #2:



    Pixel Clock :     48.22 Mhz



    Horizontal Active :     1366 pixels

    Horizontal Blanking :     160 pixels

    Horizontal Sync Offset :     32 pixels

    Horizontal Sync Pulse Width :     64 pixels

    Horizontal Border :     0 pixels

    Horizontal Size :     344 mm



    Vertical Active :     768 lines

    Vertical Blanking :     22 lines

    Vertical Sync Offset :     3 lines

    Vertical Sync Pulse Width :     6 lines

    Vertical Border :     0 lines

    Vertical Size :     194 mm



    Input Type :     Digital Separate

    Interlaced :     False

    VerticalPolarity :     False

    HorizontalPolarity :     False



Monitor Range Limit:



    Maximum Vertical Frequency :     60 Hz

    Minimum Vertical Frequency :     0 Hz

    Maximum Horizontal Frequency :     161 KHz

    Minimum Horizontal Frequency :     0 KHz

    Maximum Pixel Clock :     80 MHz



Stereo Display:



    Stereo Display :     Normal display (no stereo)



RAW Data:



0x00     00 FF FF FF FF FF FF 00 4D D9 FA 05 06 00 00 00    

0x10     00 0C 01 03 80 22 13 FF 2F 00 00 A0 57 49 9B 26    

0x20     10 48 4F 00 00 00 01 01 01 01 01 01 01 01 01 01    

0x30     01 01 01 01 01 01 20 1C 56 AE 50 00 0C 30 20 40    

0x40     36 00 58 C2 10 00 00 18 D6 12 56 A0 50 00 16 30    

0x50     20 40 36 00 58 C2 10 00 00 18 00 00 00 00 00 00    

0x60     00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FD    

0x70     00 00 3C 00 A1 08 00 00 00 00 00 00 00 00 00 5E    

Nobody knows the solution to my problem?

[henser paredes]

Hello add to the post,    VIT  (Venezolana Industria Tecnologica)   Model   M2400-2  Working with  Core i3 330M 2,13 Mhz

[GhostRaider]

Nobody knows the solution to my problem?

 

What brand/specs does this computer have? 

 

Hello add to the post,    VIT  (Venezolana Industria Tecnologica)   Model   M2400-2  Working with  Core i3 330M 2,13 Mhz

Thanks for the feedback, I'll add it to the list 

[Edwin Moquete]

Hello.

 

OS X El Capitan Golden Master was released. Do this patch work with it?

 

 

I tried with Beta 1 but it get struck while booting.

[GhostRaider]

Hello.

 

OS X El Capitan Golden Master was released. Do this patch work with it?

 

 

I tried with Beta 1 but it get struck while booting.

 

Sorry, I have not tried it on my old laptop. Planning on doing so when Apple officially releases it. If you patch the frame buffer with Giofrida's Intel HD Graphics patcher it should work. Remember that you must remove the AppleIntelHDGraphicsFB and AppleIntelHDGraphics.kext from the USB. So you make a backup of those two kexts and save them somewhere accessible. Then when OS X is installed you patch them and install them using Kext Utility. 

[alboz83]

Hi, i have Yosemite on my Hp laptop but this osx is a little slow, so i'm trying to install Snow Leopard. Deleting all AppleIntelHD....... kext the osx boot, but now i'm searching how to have right resolution and if it's possible to have QE/CI. I read various thread and tried different kext but i get always kernel panic. Anyone can help me? Thanks 

[vanmoo]

Hi, i have Yosemite on my Hp laptop but this osx is a little slow, so i'm trying to install Snow Leopard. Deleting all AppleIntelHD....... kext the osx boot, but now i'm searching how to have right resolution and if it's possible to have QE/CI. I read various thread and tried different kext but i get always kernel panic. Anyone can help me? Thanks 

Why don't you try os x mountain lion

[alboz83]

Why don't you try os x mountain lion

Yes now i'm trying Mountain Lion because is the first osx with 100% IntelHD patching. But i read snow leopard it's the fastest osx, so i want to try. 

[vanmoo]

Yes now i'm trying Mountain Lion because is the first osx with 100% IntelHD patching. But i read snow leopard it's the fastest osx, so i want to try. 

I've also tried to install snow leopard to my pc too.. it think it will boot with snow leopard starting 10.6.7 to 8. i've got force reboot when tried to boot 10.6 dvd. and distro too.