Jump to content

[GUIDE] 1st Generation Intel HD Graphics QE/CI

GhostRaider

By GhostRaider,
in Intel

 Share
2,093 posts in this topic

Recommended Posts

litania72
litania72
Posted
Posted

Hi guys, tried to get a toshiba L750 (i3-380) to work and at last I got QE/CI working with your guide, great work indeed.

 

only issues I have...

 

- brightness does not work but i use the brightness slider app

- I installed some games but they lag too much, you see them in frames really, unusable.

 

Any idea why I get low fps? the system works nicely and QE is confirmed however I noticed that tests with intel hd gpu fail with GLview app.

 

Final cut opens and seems to work ok, youtube is ok, Logic pro works.

 

Thanks in advance for your great work, appreciated....

Link to comment
Share on other sites
GhostRaider
GhostRaider
Posted
  • Author
Posted

Hi guys, tried to get a toshiba L750 (i3-380) to work and at last I got QE/CI working with your guide, great work indeed.

 

only issues I have...

 

- brightness does not work but i use the brightness slider app

- I installed some games but they lag too much, you see them in frames really, unusable.

 

Any idea why I get low fps? the system works nicely and QE is confirmed however I noticed that tests with intel hd gpu fail with GLview app.

 

Final cut opens and seems to work ok, youtube is ok, Logic pro works.

 

Thanks in advance for your great work, appreciated....

 

This IGPU isn't really meant for gaming, but gaming performance is better on Windows regardless of what specs you have on your computer. OS X is not really great for gaming as seen in some benchmarks. OpenGL Viewer fails if you are running a test higher than OpenGL 2.1. I'm not sure about your brightness issue, but reading the guide for Brightness for 1st Gen Intel HD Graphics might help. Usually its the DSDT that needs proper configuration so that OS X can recognize the brightness change. 

Link to comment
Share on other sites
litania72
litania72
Posted
Posted

Thanks for the quick reply, for the time being im truly satisfied with what i have. Got a satellite L750_201 for £115 & wasnt expecting to be able to run yosemite, i also enabled intel vtx & have win 8.1 in vmware fusion. Just need d lappy for logic pro x, well happy, 2moro ill try clone d hdd onto ssd to improve performance, will be impatiently waiting 4 somebody who can get d hdmi working...thanks.

Link to comment
Share on other sites
wyanshan
wyanshan
Posted
Posted

I've had this same problem for years but I just haven't bothered looking into it since I don't use my hackintosh as a daily device. The problem usually comes from the DSDT but again every computer is different. That's my theory. The only other possibility could be is if you are using an Alternative FB. In the plist file the P-states is set to 0, but if I set this to 1, my computer freezes. Some people have sleep working but I'm not sure how they configured their DSDT or what FB they're using.G

Thank u for quickly reply, very appreciated!

I have another question.  Is your dsdt lession based on your Kexts(Those five kexts downloaded) or I just edit DSDT.aml file and use those original appleintel kexts from installation CD.

Link to comment
Share on other sites
GhostRaider
GhostRaider
Posted
  • Author
Posted

Thank u for quickly reply, very appreciated!

I have another question.  Is your dsdt lession based on your Kexts(Those five kexts downloaded) or I just edit DSDT.aml file and use those original appleintel kexts from installation CD.

The DSDT section is separate from the Intel HD Graphics guide. Has nothing to do with the patched kexts. This is to get new people to fix their DSDT before patching it. Sometimes it is necessary to inject OS-Info for some laptops that use the Alternate FB kext. Having a patched DSDT makes this process easier.

Link to comment
Share on other sites
wyanshan
wyanshan
Posted
Posted

The DSDT section is separate from the Intel HD Graphics guide. Has nothing to do with the patched kexts. This is to get new people to fix their DSDT before patching it. Sometimes it is necessary to inject OS-Info for some laptops that use the Alternate FB kext. Having a patched DSDT makes this process easier.

But my HP DV6-3028TX laptop has a very strange problem. When I copy DSDT.aml into clover patched folder without using your 5 kexts, I can not boot into.  What I have to do is to first install your 5 kexts （maybe just FB kext is enought?）then boot. Maybe only FB kext(the other 4 kexts you provided not to use) and dsdt.aml will make it? I didn't try.

Link to comment
Share on other sites
calmesal
calmesal
Posted
Posted

Hi!

Updatet my system to 10.10.1 and the IntelGraphicsFB doesn't work. Seems that it been changed. I tried to patched with the IntelHDpatcher but no success.

Any ideas or new patched one is out? 

 

Edit!

Removed all the Intel kexts including 300, 400, and 500 series, updated the cache, rebooted and installed the kexts for 10.10 again using the latest kextutility, updated the cache, reboot and it worked.

 

One things I discovered was the new kexts from 10.10.1 has missing infoplist. That why when tried to patch, I got an error.

Link to comment
Share on other sites
GhostRaider
GhostRaider
Posted
  • Author
Posted

Hi!

Updatet my system to 10.10.1 and the IntelGraphicsFB doesn't work. Seems that it been changed. I tried to patched with the IntelHDpatcher but no success.

Any ideas or new patched one is out? 

 

Edit!

Removed all the Intel kexts including 300, 400, and 500 series, updated the cache, rebooted and installed the kexts for 10.10 again using the latest kextutility, updated the cache, reboot and it worked.

 

One things I discovered was the new kexts from 10.10.1 has missing infoplist. That why when tried to patch, I got an error.

 

The kexts from 10.10.1 update are version 10.0.19, which are exactly the same. Apple hasn't touched these kexts for a while now. I won't be patching the exact same kexts.

Link to comment
Share on other sites
litania72
litania72
Posted
Posted

Hi!

Updatet my system to 10.10.1 and the IntelGraphicsFB doesn't work. Seems that it been changed. I tried to patched with the IntelHDpatcher but no success.

Any ideas or new patched one is out? 

 

Edit!

Removed all the Intel kexts including 300, 400, and 500 series, updated the cache, rebooted and installed the kexts for 10.10 again using the latest kextutility, updated the cache, reboot and it worked.

 

One things I discovered was the new kexts from 10.10.1 has missing infoplist. That why when tried to patch, I got an error.

right, when I tried to install the 10.10.1 update it won't boot any longer, did you first boot with -x into safe mode and then re-installed the patched kexts?

 

by the way I have cloned the hdd onto a crucial m100x sad and I now get 250mb/s in write/read, not bad but to expect as i only have sata2 support on my l750; it makes a huge difference anyway.

 

thanks guys, now just need to safely update to 10.10.1....

Link to comment
Share on other sites
Alifaishol
Alifaishol
Posted
Posted

I new member here  ^_^

I've Installed OS X Yosemite in my laptop, All work well, QE/CI supported and any other hardware is compatible with kext.

But, I have problem too :

 - My Laptop is very lag when render 3D, such as Chess game, but works well on 2D rendering, I got 120FPS on [osu!] game.

 - I got [ boot0ss:error ] when booting, so I always boot with USB drive thats Installed Chameleon Bootloader.

 - Brightness always in optimal state, I wish there's simple solution  :rolleyes:

 

This my spec :

Compaq CQ41-210TU

 - Intel Core I3-330M 2.13GHz

 - 4GB RAM

 - Legacy BIOS

 - 120GB HDD

 

And this my laptop state :

 - Single boot OS X Yosemite

 - Using chameleon bootloader :

     - using bootflags [ -f kext-dev-mode=1 ]

 - DSDT is not patched [ This my original dsdt.aml extracted from linux Hope someone compiling DSDT for me http://goo.gl/YZtNl1 ] :thumbsup_anim:

 - Installed QE/CI kext with Normal, LW1, Framebuffer

Link to comment
Share on other sites
aww
aww
Posted
Posted

Just finished  installing 10.10.1 on my gateway ID49C04h  notebook  (MB build in 2010)

after remove AppleIntelHDG* from SLE,  install and get it running in less than an hour.

But try to get qe/ci ,  take me a whole day.

 

Try patched FB, all 24 versions, no luck.

 

reinstall native  AppleIntelHDG*, get blank screen.

 

In VNC sessions,  discover Clover detect 0 vRAM.  (SAME problem with my gt630, which is fixed by set VRAM 2048)

with VRAM 128, in clover plist, still see zero vRam.

 

Anyone know how to fix this?

 

Now. switch to chameleon loader, 

Chameleon installer log - Mon Dec  1 18:24:55 MST 2014

Installer version: 2.3svn 2510
 
get scrambled video.
 
remove native FB,  
Install 10.9.4 working FB 
add test-mode flag
 
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1366x768x32</string>
<key>Kernel</key>
<string>/System/Library/kernels/kernel</string>
<key>Kernel Flags</key>
<string>-v darkwake=0 kext-dev-mode=1</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>SMBIOS</key>
<string>/Extra/SMBios.plist</string>
<key>ShowInfo</key>
<string>Yes</string>
<key>Timeout</key>
<string>5</string>
 
Boot up ok and get qe/ci.
 
for those people that has a working FB on 10.9.4,  may try the same thing.
 
I would prefer Clover. (if some one tell me how fix vram problem)
 
Note:  Chamelon will not boot USB HD on GUID partition HD (use Masterboot Partition)
 
I am running this and post this from an external USB HD.
 
Link to comment
Share on other sites
oliveira131
oliveira131
Posted
Posted

Doesn't seems to be normal, the QE / CI is enabled? Opens the DVD player and on the Help menu, click Show Compatible Resources.

The video memory shows 0 in OpenGL Extensions Viewer its a normal.

It can also be your processor, do not know how the performance on a Celeron, but the Yosemite should be heavy for this processor ...

 

Is this considered as normal? everything seems to be working, transparency and such, but the interface seems sluggish at some places..

 

1417567597-capture-d-ecran-2014-12-03-a-

Link to comment
Share on other sites
Paradoxxx_1337
Paradoxxx_1337
Posted
Posted

Doesn't seems to be normal, the QE / CI is enabled? Opens the DVD player and on the Help menu, click Show Compatible Resources.

The video memory shows 0 in OpenGL Extensions Viewer its a normal.

It can also be your processor, do not know how the performance on a Celeron, but the Yosemite should be heavy for this processor ...

Thing is even when using an external USB DVD Player, the application keep telling me that there's no suitable DVD player..

 

1417568866-capture-d-ecran-2014-12-03-a-

Link to comment
Share on other sites
oliveira131
oliveira131
Posted
Posted
Ok, try and return us if it worked.
 
In my DVD player is displayed "Compatível" (PT-BR), same as or compatible Supported in English, in its Géré this would be something like manageable in French?
 

 

Nope, going to try this right now ! 

 

Also, been able to run DVD App :

 

 

Link to comment
Share on other sites
Paradoxxx_1337
Paradoxxx_1337
Posted
Posted

M'well even after injecting SMBios, no diff beside that I'm now running a mid 2010 17Inches MacBook Pro ahah.

 

 

 

Ok, try and return us if it worked.
 
In my DVD player is displayed "Compatível" (PT-BR), same as or compatible Supported in English, in its Géré this would be something like manageable in French?

 

 

That'd be translated to Supported, as in the screenshot in OP :).

Link to comment
Share on other sites
aww
aww
Posted
Posted

On sat morning, have some free time

Retest 10.0.19 patched kernel on Chameleon 2510.

I was connected to HDMI 1920x1080,  but found my patched  kext  one of the single link sections.

 

Did 2 other test,

A.  install 10.0.19 kexts on  osx 10.9.5

      only FB will load

      10.0,19 FB  will work  on 10.9.5  (even console backtrace message is the same)

      I am certain now,  FB never was changed from 10.8 to 10.10

 

B.  ReTest Patched 10.0.19 FB under Clover.

     new Clover 3050 will not boot to boot screen.

    use Clover 2795.

    

1,   set intel inject = no

2.  set SMBIOS system id inject = No

3,  Copy chameleon smbios  plist info to clover

<key>SMBIOS</key>
<dict>
<key>BiosVersion</key>
<string>MBP61.0057.B0F</string>
<key>BoardSerialNumber</key>
<string>Mac-xxxxxxxx</string>
<key>Family</key>
<string>MacBook Pro</string>
<key>ProductName</key>
<string>MacBookPro6,1</string>
<key>SerialNumber</key>
<string>xxxxxxxxxxxx</string>
<key>SmUUID</key>
<string>00000000-0000-1000-8000-01020304058f</string>

 

</dict>
 
4. set fake id:
<key>FakeID</key>
<dict>
<key>ATI</key>
<string>0x0</string>
<key>IMEI</key>
<string>0x0</string>
<key>IntelGFX</key>
<string>0x2d108086</string>
<key>LAN</key>
<string>0x0</string>
<key>NVidia</key>
<string>0x0</string>
<key>SATA</key>
<string>0x0</string>
<key>WIFI</key>
<string>0x0</string>
<key>XHCI</key>
<string>0x0</string>
</dict>
 
add boot flags
 
<key>Arguments</key>
<string>-v  kext-dev-mode=1</string>
<key>DefaultVolume</key>
<string>YosemiteRel1</string>
 
Now i can use clover with patch kext with qe/ci
Link to comment
Share on other sites
  • 3 weeks later...
litania72
litania72
Posted
Posted

hi guys, I think the 3d lag on games might be possibly caused by the fact that it uses apple software renderer instead of OpenGL, i am sure the intel gam has more than enough power to run most games, maybe not the kind of batman arkham but surely angry birds like game...seems also that benchmarks go bad and shows apple SR instead od OpenGL, hope somebody can figure out whats wrong with the kext or how to force intel hd instead of apple 3d drivers.

 

is it an issue with vram not set? 

Link to comment
Share on other sites
litania72
litania72
Posted
Posted

just an update, noticed that lets world 2 worked well no lag. Investigated about if the plist file had the key which I was looking for but found nothing...then explored the library folder (user/username/library/containers/) and found 2 files I then deleted:

 

com.apple.opengl.plist

 

com.nvidia.OpenGL.plist

 

fixed cache, permissions...rebooted with -v -f (just in case) then when back onto desktop I run those game which lagged (e.g. battle monkey,crash drive); I soon noticed the difference in fps...angry birds run perfect as well.

 

only thing I tried red crucible and it still lags however it is better (less lag);

 

hope a genius can gave an explanation soon...thanks

Link to comment
Share on other sites
derek.zhu
derek.zhu
Posted
Posted

after upgrading to 10.10.1, and (updating the kext files as well) I got black screen, and vnc works.

 

Acer 4741G, attached with my dump file

                    PGETBL_CTL: 0x00000008
               GEN6_INSTDONE_1: 0xfffffffe
               GEN6_INSTDONE_2: 0xffffffff
                  CPU_VGACNTRL: 0x80000000 (disabled)
    DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000
                     RR_HW_CTL: 0x00000000 (low 0, high 0)
                FDI_PLL_BIOS_0: 0x082b3019
                FDI_PLL_BIOS_1: 0x00000000
                FDI_PLL_BIOS_2: 0x00000000
       DISPLAY_PORT_PLL_BIOS_0: 0x0807012b
       DISPLAY_PORT_PLL_BIOS_1: 0x00000000
       DISPLAY_PORT_PLL_BIOS_2: 0x00000000
              FDI_PLL_FREQ_CTL: 0x00053687
                     PIPEACONF: 0xc0000050 (enabled, active, pf-pd, rotate 0, 6bpc)
                      HTOTAL_A: 0x05f50555 (1366 active, 1526 total)
                      HBLANK_A: 0x05f50555 (1366 start, 1526 end)
                       HSYNC_A: 0x05a50585 (1414 start, 1446 end)
                      VTOTAL_A: 0x031502ff (768 active, 790 total)
                      VBLANK_A: 0x031502ff (768 start, 790 end)
                       VSYNC_A: 0x03070302 (771 start, 776 end)
                  VSYNCSHIFT_A: 0x00000000
                      PIPEASRC: 0x055502ff (1366, 768)
                 PIPEA_DATA_M1: 0x7e268f5c (TU 64, val 0x268f5c 2527068)
                 PIPEA_DATA_N1: 0x00400000 (val 0x400000 4194304)
                 PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_M1: 0x00022468 (val 0x22468 140392)
                 PIPEA_LINK_N1: 0x00080000 (val 0x80000 524288)
                 PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
                      DSPACNTR: 0xd8004400 (enabled)
                      DSPABASE: 0x00000000
                    DSPASTRIDE: 0x00001600 (88)
                      DSPASURF: 0x00cb1003
                   DSPATILEOFF: 0x00000000 (0, 0)
                     PIPEBCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc)
                      HTOTAL_B: 0x031f027f (640 active, 800 total)
                      HBLANK_B: 0x03170287 (648 start, 792 end)
                       HSYNC_B: 0x02ef028f (656 start, 752 end)
                      VTOTAL_B: 0x020c01df (480 active, 525 total)
                      VBLANK_B: 0x020401e7 (488 start, 517 end)
                       VSYNC_B: 0x01eb01e9 (490 start, 492 end)
                  VSYNCSHIFT_B: 0x00000000
                      PIPEBSRC: 0x027f01df (640, 480)
                 PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N1: 0x00000000 (val 0x0 0)
                 PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N2: 0x00000000 (val 0x0 0)
                      DSPBCNTR: 0x00004000 (disabled)
                      DSPBBASE: 0x00000000
                    DSPBSTRIDE: 0x00000000 (0)
                      DSPBSURF: 0x00000000
                   DSPBTILEOFF: 0x00000000 (0, 0)
                     PIPECCONF: 0x00000000 (disabled, inactive, pf-pd, rotate 0, 8bpc)
                      HTOTAL_C: 0x00000000 (1 active, 1 total)
                      HBLANK_C: 0x00000000 (1 start, 1 end)
                       HSYNC_C: 0x00000000 (1 start, 1 end)
                      VTOTAL_C: 0x00000000 (1 active, 1 total)
                      VBLANK_C: 0x00000000 (1 start, 1 end)
                       VSYNC_C: 0x00000000 (1 start, 1 end)
                  VSYNCSHIFT_C: 0x00000000
                      PIPECSRC: 0x00000000 (1, 1)
                 PIPEC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                 PIPEC_DATA_N1: 0x00000000 (val 0x0 0)
                 PIPEC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEC_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEC_LINK_M1: 0x00000000 (val 0x0 0)
                 PIPEC_LINK_N1: 0x00000000 (val 0x0 0)
                 PIPEC_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEC_LINK_N2: 0x00000000 (val 0x0 0)
                      DSPCCNTR: 0x00000000 (disabled)
                      DSPCBASE: 0x00000000
                    DSPCSTRIDE: 0x00000000 (0)
                      DSPCSURF: 0x00000000
                   DSPCTILEOFF: 0x00000000 (0, 0)
                     PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFA_CTL_2: 0x00007e80 (vscale 0.988281)
                     PFA_CTL_3: 0x00003f40 (vscale initial phase 0.494141)
                     PFA_CTL_4: 0x00007d54 (hscale 0.979126)
                   PFA_WIN_POS: 0x00000000 (0, 0)
                  PFA_WIN_SIZE: 0x00000000 (0, 0)
                     PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFB_CTL_2: 0x00000000 (vscale 0.000000)
                     PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)
                     PFB_CTL_4: 0x00000000 (hscale 0.000000)
                   PFB_WIN_POS: 0x00000000 (0, 0)
                  PFB_WIN_SIZE: 0x00000000 (0, 0)
                     PFC_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFC_CTL_2: 0x00000000 (vscale 0.000000)
                     PFC_CTL_3: 0x00000000 (vscale initial phase 0.000000)
                     PFC_CTL_4: 0x00000000 (hscale 0.000000)
                   PFC_WIN_POS: 0x00000000 (0, 0)
                  PFC_WIN_SIZE: 0x00000000 (0, 0)
              PCH_DREF_CONTROL: 0x00001400 (cpu source disable, ssc_source enable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 disable, ssc4 disable)
               PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
              PCH_DPLL_TMR_CFG: 0x0271186a
                PCH_SSC4_PARMS: 0x00000000
            PCH_SSC4_AUX_PARMS: 0x00000000
                  PCH_DPLL_SEL: 0x00000000 (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
           PCH_DPLL_ANALOG_CTL: 0x00008000
                    PCH_DPLL_A: 0x88046004 (enable, sdvo high speed no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk SSC, sdvo/hdmi mul 1)
                    PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)
                      PCH_FPA0: 0x00021009 (n = 2, m1 = 16, m2 = 9)
                      PCH_FPA1: 0x00021009 (n = 2, m1 = 16, m2 = 9)
                      PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                      PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                TRANS_HTOTAL_A: 0x05f50555 (1366 active, 1526 total)
                TRANS_HBLANK_A: 0x05f50555 (1366 start, 1526 end)
                 TRANS_HSYNC_A: 0x05a50585 (1414 start, 1446 end)
                TRANS_VTOTAL_A: 0x031502ff (768 active, 790 total)
                TRANS_VBLANK_A: 0x031502ff (768 start, 790 end)
                 TRANS_VSYNC_A: 0x03070302 (771 start, 776 end)
            TRANS_VSYNCSHIFT_A: 0x00000000
                TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_B: 0x031f027f (640 active, 800 total)
                TRANS_HBLANK_B: 0x03170287 (648 start, 792 end)
                 TRANS_HSYNC_B: 0x02ef028f (656 start, 752 end)
                TRANS_VTOTAL_B: 0x020c01df (480 active, 525 total)
                TRANS_VBLANK_B: 0x020401e7 (488 start, 517 end)
                 TRANS_VSYNC_B: 0x01eb01e9 (490 start, 492 end)
            TRANS_VSYNCSHIFT_B: 0x00000000
                TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)
                 TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)
                TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_VBLANK_C: 0x00000044 (69 start, 1 end)
                 TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)
            TRANS_VSYNCSHIFT_C: 0x00000000
                TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)
                    TRANSACONF: 0xc0000040 (enable, active, progressive)
                    TRANSBCONF: 0x00000000 (disable, inactive, progressive)
                    TRANSCCONF: 0x00000000 (disable, inactive, progressive)
                   FDI_TXA_CTL: 0xb0044000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
                   FDI_TXB_CTL: 0x00044000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
                   FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)
                   FDI_RXA_CTL: 0xb0022050 (enable, train pattern not train, port width X1, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, PCDClk)
                   FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
                   FDI_RXC_CTL: 0x00000000 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing disable, RawClk)
                  FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXC_MISC: 0x00000000 (FDI Delay 0)
               FDI_RXA_TUSIZE1: 0x7e000000
               FDI_RXA_TUSIZE2: 0x7e000000
               FDI_RXB_TUSIZE1: 0x7e000000
               FDI_RXB_TUSIZE2: 0x7e000000
               FDI_RXC_TUSIZE1: 0x00000000
               FDI_RXC_TUSIZE2: 0x00000000
                 FDI_PLL_CTL_1: 0x33505248
                 FDI_PLL_CTL_2: 0x00000000
                   FDI_RXA_IIR: 0x00000000
                   FDI_RXA_IMR: 0x000000ff
                   FDI_RXB_IIR: 0x00000000
                   FDI_RXB_IMR: 0x000000ff
                      PCH_ADPA: 0x00f40018 (disabled, transcoder A, +hsync, +vsync)
                         HDMIB: 0x0000089c (disabled pipe A 8bpc TMDS DVI audio disabled +vsync +hsync detected)
                         HDMIC: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected)
                         HDMID: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected)
                      PCH_LVDS: 0x80300302 (enabled, pipe A, 18 bit, 1 channel)
                     CPU_eDP_A: 0x00000018
                      PCH_DP_B: 0x0000001c
                      PCH_DP_C: 0x00000018
                      PCH_DP_D: 0x00000018
                TRANS_DP_CTL_A: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)
                TRANS_DP_CTL_B: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)
                TRANS_DP_CTL_C: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)
              BLC_PWM_CPU_CTL2: 0x80000000
               BLC_PWM_CPU_CTL: 0x000002db
              BLC_PWM_PCH_CTL1: 0x80000000
              BLC_PWM_PCH_CTL2: 0x03d003d0
                 PCH_PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
                PCH_PP_CONTROL: 0xabcd0003 (blacklight disabled, power down on reset, panel on)
              PCH_PP_ON_DELAYS: 0x012c0bb8
             PCH_PP_OFF_DELAYS: 0x012c0bb8
                PCH_PP_DIVISOR: 0x00186906
                      PORT_DBG: 0x00000000 (HW DRRS off)
            RC6_RESIDENCY_TIME: 0xffffffff
           RC6p_RESIDENCY_TIME: 0xffffffff
          RC6pp_RESIDENCY_TIME: 0xffffffff

 

Just finished  installing 10.10.1 on my gateway ID49C04h  notebook  (MB build in 2010)

after remove AppleIntelHDG* from SLE,  install and get it running in less than an hour.

But try to get qe/ci ,  take me a whole day.

 

Try patched FB, all 24 versions, no luck.

 

reinstall native  AppleIntelHDG*, get blank screen.

 

In VNC sessions,  discover Clover detect 0 vRAM.  (SAME problem with my gt630, which is fixed by set VRAM 2048)

with VRAM 128, in clover plist, still see zero vRam.

 

Anyone know how to fix this?

 

Now. switch to chameleon loader, 

Chameleon installer log - Mon Dec  1 18:24:55 MST 2014

Installer version: 2.3svn 2510
 
get scrambled video.
 
remove native FB,  
Install 10.9.4 working FB 
add test-mode flag
 
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1366x768x32</string>
<key>Kernel</key>
<string>/System/Library/kernels/kernel</string>
<key>Kernel Flags</key>
<string>-v darkwake=0 kext-dev-mode=1</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>SMBIOS</key>
<string>/Extra/SMBios.plist</string>
<key>ShowInfo</key>
<string>Yes</string>
<key>Timeout</key>
<string>5</string>
 
Boot up ok and get qe/ci.
 
for those people that has a working FB on 10.9.4,  may try the same thing.
 
I would prefer Clover. (if some one tell me how fix vram problem)
 
Note:  Chamelon will not boot USB HD on GUID partition HD (use Masterboot Partition)
 
I am running this and post this from an external USB HD.
 

 

same issue here, everything was fine on 10.10, but after update, got black screen. tried inject edid no luck. I dont know how to downgrade so i'm about to re-install 10.10.

Link to comment
Share on other sites
litania72
litania72
Posted
Posted

Guys if that helps I tell u how I upgraded to 10.10.1......

 

Remove Intel HD left you installed from this guide

 

Repaie kext cache, permission

 

Restart in safe mode

 

Update to 10.10.1

 

Repair cache, restart again I safe mode

 

Reinstall the Intel GMA HD kexts

 

Repair cache and parmission

 

Yes, restart again maybe using -v -f

 

Done

 

It worked for me...

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...