2bad0 Posted June 8, 2014 Share Posted June 8, 2014 i've tried but still no luck. now it give me an error like "missing bluetooth controller transport!" im not familiar with clover.. what bootflags did you use? should i use "Graphics Mode"="1366x768x32" on bootArgs? by the way to boot Yoyemite partition im using USBdrive, not installed in partition. and bootflags "-v kext-dev-mode=1 ncpi=0x2000 PCIRootUID=1 GraphicsEnable=No" without any IntelHDGraphics kexts (in mycase) Edit: works now using patchVBios, but without intelHDGraphics kexts installed in System/Library/Extensions/. so laggy.. what setting did you use to patch 10.9.3 i'll try patching it for you Link to comment Share on other sites More sharing options...
brinka123 Posted June 9, 2014 Share Posted June 9, 2014 Hi, Maybe a stupid question but (Have a edp contector): Can I aspect that video playback using DVD player, VLC, mplayer or xbmc will work when I have CI only.? I ask this because it looks like everything works (Youtube HD) but no video player wil work. Some crash , DVD player says A valid device could not be found for blayback for example.... Regards Link to comment Share on other sites More sharing options...
2bad0 Posted June 9, 2014 Share Posted June 9, 2014 Hi, Maybe a stupid question but (Have a edp contector): Can I aspect that video playback using DVD player, VLC, mplayer or xbmc will work when I have CI only.? I ask this because it looks like everything works (Youtube HD) but no video player wil work. Some crash , DVD player says A valid device could not be found for blayback for example.... Regards Not to sure maybe someone with CI only might respond better,but i think there is a way to make vlc work without full gfx stack not sure if its an older version but you can check out google.Those programs might have hardware acceleration hard coded. and have you ever tried an external monitor to see if you get the complete experience? Link to comment Share on other sites More sharing options...
brinka123 Posted June 9, 2014 Share Posted June 9, 2014 No I didn't try an external monitor yet, more focussed on video playback. When I use mplayer for example, it can show video in a window (DVD disk). but when fullscreen is switched, I got a destorted video file. I can go back to the window again and I have normal video.... XBMC crashes when started..... DVD player says gives the video playback error... Link to comment Share on other sites More sharing options...
anzharhendra Posted June 9, 2014 Share Posted June 9, 2014 what setting did you use to patch 10.9.3 i'll try patching it for you thanks for your kexts. finally get QE/CI Link to comment Share on other sites More sharing options...
brinka123 Posted June 11, 2014 Share Posted June 11, 2014 Hi still finding out things regarding video playback. When I remove the AppleIntelHDGraphics.kext i can start XBMC and plays video using VAD hardware acceleration. The VAD is installed using the CI installation according the 1st post…?? So any idea why this app is not started with AppleIntelHDGraphics.kext is installed? The videos must be played using VAD. VAD is mentioned in the AppleIntelHDGraphics.kext…… Link to comment Share on other sites More sharing options...
Liipezukaa Posted June 12, 2014 Share Posted June 12, 2014 Hi everyone !This is my Hackintosh video (: https://www.youtube.com/watch?v=DfOCZ8o5Qho ProBook 4520s Link to comment Share on other sites More sharing options...
TacosAndSalsa Posted June 12, 2014 Share Posted June 12, 2014 Has anybody had any problems with OpenGL at all? I have full QE/CI enabled, but games like Minecraft and Half Life 2 are having problems with Transparent Textures. I checked both their debugs and all is pointing back to OpenGL Errors with the ID's of 1238 and 1208. I have a feeling this is related to the Intel HD Open GL plugin somehow. But I could be wrong. Link to comment Share on other sites More sharing options...
anhminhvip Posted June 14, 2014 Share Posted June 14, 2014 Here Are The files for 10.10 https://anonfiles.com/file/a748010260d526af08e0b3136a961b00 and patcher http://www.insanelymac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=141684 the file named AppleIntelHDGraphics.FBUnpatched.kext should be renamed accordingly to AppIentelHDGraphicsFB.kext and patched with the respective settings ie. the settings you used in patching previous iterations of the frame-buffer AppleIntelHDGraphics.FBpatched.kext is one patched by me with lvds+vga additionally the plist is edited to have powermanagement off Remember to rebuild kext-cache,if you use kextutility or a similar app then this process is optional i use kext your intel HD but monitor not full and this have 2 card intel HD but 1 card full QE/CI and 1 card no kext load plz fix tks Link to comment Share on other sites More sharing options...
2bad0 Posted June 15, 2014 Share Posted June 15, 2014 i use kext your intel HD but monitor not full and this have 2 card intel HD but 1 card full QE/CI and 1 card no kext load plz fix tks Screen Shot 2014-06-14 at 10.30.40 AM.png Screen Shot 2014-06-14 at 10.30.46 AM.png IMG_0001.JPG IMG_0002.JPG What settings did you use to patch FB on mavericks? Link to comment Share on other sites More sharing options...
anhminhvip Posted June 15, 2014 Share Posted June 15, 2014 What settings did you use to patch FB on mavericks? i use ports LVDS and mode is Normal, link width X1, not Dualink Link to comment Share on other sites More sharing options...
Abztosh Posted June 17, 2014 Share Posted June 17, 2014 My Hackintosh Niresh Lion 10.7.2 is booting with native resolution using the chameleon module, however there's no CI/QE! the OP only has info for ML and Maver Any tips to get Lion working here? it's a toshiba Satellite A665-S5170 i3 Laptop btw. tia Link to comment Share on other sites More sharing options...
Liipezukaa Posted June 17, 2014 Share Posted June 17, 2014 My Hackintosh Niresh Lion 10.7.2 is booting with native resolution using the chameleon module, however there's no CI/QE! the OP only has info for ML and Maver Any tips to get Lion working here? it's a toshiba Satellite A665-S5170 i3 Laptop btw. tia Your graphic card is GT 330M, right ? Use it. Don't use Intel HD Graphics... Just install Mavericks and use GraphicsEnabler=Yes. Link to comment Share on other sites More sharing options...
Abztosh Posted June 17, 2014 Share Posted June 17, 2014 Your graphic card is GT 330M, right ? Use it. Don't use Intel HD Graphics... Just install Mavericks and use GraphicsEnabler=Yes. No I don't have nVidia Intel ®Core™ i3-380M Processor o 2.53 GHz, 3MB Cache Mobile Intel ® HM55 Express Chipset Mobile Intel ® HD Graphics with 64MB-1696MB dynamically allocated shared graphics memory Link to comment Share on other sites More sharing options...
Liipezukaa Posted June 17, 2014 Share Posted June 17, 2014 No I don't have nVidia Intel ®Core™ i3-380M Processor o 2.53 GHz, 3MB Cache Mobile Intel ® HM55 Express Chipset Mobile Intel ® HD Graphics with 64MB-1696MB dynamically allocated shared graphics memory Oh, ok, i'm sorry, wrong notebook ! This kext's only work on Mountain Lion and Mavericks... Don't work on Snow Leopard or Lion Link to comment Share on other sites More sharing options...
brinka123 Posted June 17, 2014 Share Posted June 17, 2014 Installed Mountain Lion. The Kext work I got CI enabled. Installed Mavericks. The Kext from 10.9.3 don't work. Got a distorted screen.... Any ideas??? Link to comment Share on other sites More sharing options...
Liipezukaa Posted June 17, 2014 Share Posted June 17, 2014 Installed Mountain Lion. The Kext work I got CI enabled. Installed Mavericks. The Kext from 10.9.3 don't work. Got a distorted screen.... Any ideas??? Install Natit, maybe it help... I've a question... (or a problem) When i'm playing Counter-strike 1.6 (very old game), when i zoom AWP, my screen go Black. I'm posting a screenshot to show better... I've tried Counter-strike 1.6 STEAM and No Steam and the problem still Link to comment Share on other sites More sharing options...
GhostRaider Posted June 17, 2014 Author Share Posted June 17, 2014 Installed Mountain Lion. The Kext work I got CI enabled. Installed Mavericks. The Kext from 10.9.3 don't work. Got a distorted screen.... Any ideas??? Weird, should work fine. All you need is the AppleIntelHDGraphics.kext, AppleIntelHDGraphicsGL.bundle and AppleIntelHDGraphicsVA.bundle. Make sure that if you are using Clover, disable Intel injection. Maybe you have wrong Intel graphics igpu? to little information My Hackintosh Niresh Lion 10.7.2 is booting with native resolution using the chameleon module, however there's no CI/QE! the OP only has info for ML and Maver Any tips to get Lion working here? it's a toshiba Satellite A665-S5170 i3 Laptop btw. tia I'm not sure if Toshiba laptops can enable QE/CI. You have to install Mountain Lion 10.8.5 or Mavericks. Lion and anything else is not supported. Has anybody had any problems with OpenGL at all? I have full QE/CI enabled, but games like Minecraft and Half Life 2 are having problems with Transparent Textures. I checked both their debugs and all is pointing back to OpenGL Errors with the ID's of 1238 and 1208. I have a feeling this is related to the Intel HD Open GL plugin somehow. But I could be wrong. As for gaming in OS X, it can be that the Intel HD Graphics kexts weren't really programmed for games. So this can be an issue with Apple and their kexts. If you really need to play games, consider dual booting Windows for games and OS X for everything else. Install Natit, maybe it help... I've a question... (or a problem) When i'm playing Counter-strike 1.6 (very old game), when i zoom AWP, my screen go Black. I'm posting a screenshot to show better... I've tried Counter-strike 1.6 STEAM and No Steam and the problem still Same thing as said above. OS X and the Intel HD Graphics IGPU probably have bugs when it comes to games. If you really need to play games, dual boot Windows. Besides games on Windows perform better than OS X for some reason. If you are wondering why the Intel HD Graphics IGPU has bugs, its because Apple never intended people to use the IGPU for games. In a real MacBook Pro with Arrandale processors, they switch to the NVIDIA GPU. Apple probably didn't want to spend time fixing this anyway. Not sure if this is fixed in OS X Yosemite. Link to comment Share on other sites More sharing options...
Liipezukaa Posted June 17, 2014 Share Posted June 17, 2014 Ok, thanks @GhostRaider Link to comment Share on other sites More sharing options...
51r Posted June 18, 2014 Share Posted June 18, 2014 Install Natit, maybe it help... I've a question... (or a problem) When i'm playing Counter-strike 1.6 (very old game), when i zoom AWP, my screen go Black. I'm posting a screenshot to show better... I've tried Counter-strike 1.6 STEAM and No Steam and the problem still for me it's working without problem.. Link to comment Share on other sites More sharing options...
Liipezukaa Posted June 18, 2014 Share Posted June 18, 2014 for me it's working without problem.. Ok 51r, I sent pm Link to comment Share on other sites More sharing options...
anzharhendra Posted June 19, 2014 Share Posted June 19, 2014 update os x yosemite dp1 to dp2 using softwareupdate.. success. Link to comment Share on other sites More sharing options...
NSCXP2005 Posted June 19, 2014 Share Posted June 19, 2014 I am trying to boot up mavericks and I keep getting an error regarding Bluetooth. I have searched around and found it is connected to the HD4000. Does anyone know how I can boot the system with the HD4000 and have full qe/ci? Thanks Link to comment Share on other sites More sharing options...
brinka123 Posted June 19, 2014 Share Posted June 19, 2014 Weird, should work fine. All you need is the AppleIntelHDGraphics.kext, AppleIntelHDGraphicsGL.bundle and AppleIntelHDGraphicsVA.bundle. Make sure that if you are using Clover, disable Intel injection. Maybe you have wrong Intel graphics igpu? to little information I have the intel (8086) Device 0046 (i3 380M) I installed mountain lion n hard disk (works fine) and to test mavericks on a USB disk. Clover boot is install on the USB disk too. Copied the clover configuration from Mountain Lion to the USB disk with mavericks. So clover configuration is same for ML and Mavericks. Installed the CI 10.9.3 with kext utility for mavericks.... Is the kext utility maybe causing this problem. Which kext installer do you use for mavericks? 1 Link to comment Share on other sites More sharing options...
GhostRaider Posted June 19, 2014 Author Share Posted June 19, 2014 I have the intel (8086) Device 0046 (i3 380M) I installed mountain lion n hard disk (works fine) and to test mavericks on a USB disk. Clover boot is install on the USB disk too. Copied the clover configuration from Mountain Lion to the USB disk with mavericks. So clover configuration is same for ML and Mavericks. Installed the CI 10.9.3 with kext utility for mavericks.... Is the kext utility maybe causing this problem. Which kext installer do you use for mavericks? I use Kext Utility as well. I'm not sure what's going on. What if you install 10.9.2 or earlier versions of the CI kexts? If its the same result, I believe maybe Clover is doing something unless you have the AppleIntelHDGraphicsGA kext somewhere hidden in the Extensions folder. Check thourougly that Intel injection is disabled in Clover and make sure that AppleIntelHDGraphicsGA is nowhere to be found. Not in Clover folders nor in Extensions folder. I am trying to boot up mavericks and I keep getting an error regarding Bluetooth. I have searched around and found it is connected to the HD4000. Does anyone know how I can boot the system with the HD4000 and have full qe/ci? Thanks There are many threads on HD4000 here but this thread is for 1st Gen Intel HD Graphics. I do not think bluetooth is the problem. Delete all of the Intel kexts in the Extensions folder and that should force OS X to show the desktop without graphics acceleration. 1 Link to comment Share on other sites More sharing options...
Recommended Posts