Jump to content

[GUIDE] 1st Generation Intel HD Graphics QE/CI

GhostRaider

By GhostRaider,
in Intel

 Share
2,093 posts in this topic

Recommended Posts

GhostRaider
GhostRaider
Posted
  • Author
Posted

When do you see these messages? I mean I only boot in Legacy Mode where I just see the Apple Logo. You guys see these messages in Verbose boot?

 

Edit: Looking at Console I can see these same messages. Well I'm not sure what these messages are but as everyone says, it works fine. Unless the reason is because the kexts aren't signed? 

 

@Petervanakelyen I get this feeling that something is wrong with your installation. I mean there is no reason for those kexts to cause a kernel panic. I'm assuming your hardware id is 00468086 right? Usually this happens when kexts are corrupted. As you said, maybe some kexts are missing their info.plist file and you may have to make a new installation of OS X.

Link to comment
Share on other sites
Petervanakelyen
Petervanakelyen
Posted
Posted

@Petervanakelyen I get this feeling that something is wrong with your installation. I mean there is no reason for those kexts to cause a kernel panic. I'm assuming your hardware id is 00468086 right? Usually this happens when kexts are corrupted. As you said, maybe some kexts are missing their info.plist file and you may have to make a new installation of OS X.

 

 

 

I wasn't sure what to call the backtrace messages on boot, but as other have these too (and OS X works fine), it's not a kernel panic & I was simply incorrect with my wording. I still wonder what causes my install to hang after loading AppleIntelHDGraphicsFB.kext though.

 

EDIT: The alternative framebuffer kext works! Native res, full QE/CI support,... I should've tried this sooner.  :lol:

  • Like 2
Link to comment
Share on other sites
GhostRaider
GhostRaider
Posted
  • Author
Posted

I wasn't sure what to call the backtrace messages on boot, but as other have these too (and OS X works fine), it's not a kernel panic & I was simply incorrect with my wording. I still wonder what causes my install to hang after loading AppleIntelHDGraphicsFB.kext though.

 

EDIT: The alternative framebuffer kext works! Native res, full QE/CI support,... I should've tried this sooner.  :lol:

Microsoft won't be happy about that lol  B)

  • Like 1
Link to comment
Share on other sites
monsterrrrr
monsterrrrr
Posted
Posted

 i have a lot of questions???would somebody plz tell me what is the best way to install hackintosh?? and how to set the smbios to mac book pro 6,1(once i tried myhack method to install hackintosh and it set the SMbios of iMac..   :( ).And do i need to install FakeSMC.kext after installation or not?? & one thing more do i need to delete all the kexts like intel hd 3000.4000,5000 before installing the AppleIntelHDFB.kext (patched)and AppleIntelHd.kexts?? can somebody here plz answer my question???and plz cover all my questions.

Link to comment
Share on other sites
GhostRaider
GhostRaider
Posted
  • Author
Posted

 i have a lot of questions???would somebody plz tell me what is the best way to install hackintosh?? and how to set the smbios to mac book pro 6,1(once i tried myhack method to install hackintosh and it set the SMbios of iMac..   :( ).And do i need to install FakeSMC.kext after installation or not?? & one thing more do i need to delete all the kexts like intel hd 3000.4000,5000 before installing the AppleIntelHDFB.kext (patched)and AppleIntelHd.kexts?? can somebody here plz answer my question???and plz cover all my questions.

Judging by your questions, you will need to learn about hackintoshing from the ground up. You cannot attempt this until you know the basics of hackintoshing. There are topics in the InsanelyMac forum that can give you some knowledge on how things work. Google can also help you as well as YouTube.

 

You also have to know the hardware that your computer has.

Link to comment
Share on other sites
warraisraw
warraisraw
Posted
Posted

Hi all, in my case Mavericks run flawlessly (no lags) and better than Mountain Lion. Only issue is wake from sleep, apart HDMI output that all know, everything else is ok (Wifi, LAN, Audio, Backlight, USB 2.0, Webcam, DVD-RW, Battery, Keyboard and Trackpad, Intel HD Graphics).

Regards.

Link to comment
Share on other sites
GhostRaider
GhostRaider
Posted
  • Author
Posted

Does anyone get the lags with flash player on Mavericks? I can't see YouTube videos because sometimes screen freezes for a 1-2 second. 10.8.5 works beautiful

Everything seems working fine for me and other people. Not sure what's happening with your hackintosh. Did you do anything differently with Mavericks?

Link to comment
Share on other sites
P3TR05
P3TR05
Posted
Posted

Does anyone get the lags with flash player on Mavericks? I can't see YouTube videos because sometimes screen freezes for a 1-2 second. 10.8.5 works beautiful

Same here... 

With 10.8.4 worked good, now i did clean install 10.9 and i have this problem too.

Link to comment
Share on other sites
sartemd174
sartemd174
Posted
Posted

Everything seems working fine for me and other people. Not sure what's happening with your hackintosh. Did you do anything differently with Mavericks?

No, i exactly did the same things that i did in other systems (snow leopard,lion,mountain lion) but Mavericks works worse than all. Even Finder loads files a lot slower than it was in mountain lion (i need to wait for 5-6 sec to see the files in finder after boot system). So i back to my 10.8.5 system and i will wait for better version of Mavericks. 

Link to comment
Share on other sites
P3TR05
P3TR05
Posted
Posted

Does anyone get the lags with flash player on Mavericks? I can't see YouTube videos because sometimes screen freezes for a 1-2 second. 10.8.5 works beautiful

Solved by enabling audio, previously i don't  have patched AppleHDA, it has nothing to do with graphic kexts.

Link to comment
Share on other sites
sartemd174
sartemd174
Posted
Posted

AppleHDA for ALC 272 exists. I'm using it on 10.9. I'm not sure why you say there is none.

I used applehda+dsdt inject(hdef) on 10.8-10.8.4, but when i upgrade to 10.8.5 this kext stop working at all so i had to use voodohda. Anyway, can you share your 10.9 apple hda (or maybe some dsdt hacks for that?) to let me test it on 10.8.5?

Link to comment
Share on other sites
Oscarb
Oscarb
Posted
Posted

Hello, Well going back to topic, I have a problem enabling only CI kexts on Maveriks , Due to the nature of my Laptop I was only able to use CI kexts on mountain lion  and the kexts worked perfectly, buy now that I upgraded to 10.9 they doesn't work, theres flickering when opening images, and somehow  my menu bar is translucent even though no FB is loaded, can anybody help? maybe helping me use 10.8.5 kexts with 10.9?

Link to comment
Share on other sites
Jugz
Jugz
Posted
Posted

I would like to post my success story for everyone. I took a year off from the InsanelyMac community and when I returned, there was a patch for 1st Generation Intel! Bravo to all who developed it. It took three different combinations and restarts and finally got it. I used the Linux Dump Anal-yser method with the X1, LVDS, 10.8.x, and Alternative options in version 0.7. Now to questions:

 

1. According to Intel's page for my processor (see sig for details) I have a 2 core 4 thread processor. I have patched the kernel so I do not have to use cpus=1 and it boots but "System Profiler" still says 1 processor, 2 core. Why does it do this?

 

2. Now relevant to thread question: the Intel website also says that I have 500MB of Graphics memory but with this method, it only shows up as 288MB. Why is this and how can I make it the full 500MB?

 

 

Extra info:

I boot with this: 

ncpi=0x2000 PCIRootUID=0

 

 

My chameleon boot plists is this:

 

<key>Boot Graphics</key>

<string>Yes</string>

<key>EthernetBuiltIn</key>

<string>Yes</string>

<key>Graphics Mode</key>

<string>1366x768x32</string>

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>Kernel</key>

<string>mach_kernel2</string>

<key>Kernel Flags</key>

<string>npci=0x2000 PCIRootUID=0</string>

<key>Legacy Logo</key>

<string>Yes</string>

<key>Quiet Boot</key>

<string>No</string>

<key>Timeout</key>

<string>5</string>

<key>UseKernelCache</key>

<string>No</string>

And some pics (for proof):

 

screen1.png

 

screen2.png

 

screen3.png

 

Thanks again for any help guys!

Link to comment
Share on other sites
vanmoo
vanmoo
Posted
Posted

ASK :  after i'm install the driver (kext) from your file (Intel HD Graphics QE/CI 10.9) via kext utility, then i'm reboot my pc, it booted, and then after apple boot screen (spinning logo) stop spinning and don't go to the desktop, also i've installed natit.kext, so i just got QE.


ubuntu@ubuntu:~$ sudo intel_reg_dumper
                    PGETBL_CTL: 0x00000008
               GEN6_INSTDONE_1: 0xfffffffe
               GEN6_INSTDONE_2: 0xffffffff
                  CPU_VGACNTRL: 0x80000000 (disabled)
    DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000
                     RR_HW_CTL: 0x00000000 (low 0, high 0)
                FDI_PLL_BIOS_0: 0x082b3019
                FDI_PLL_BIOS_1: 0x00000000
                FDI_PLL_BIOS_2: 0x00000000
       DISPLAY_PORT_PLL_BIOS_0: 0x0807012b
       DISPLAY_PORT_PLL_BIOS_1: 0x00000000
       DISPLAY_PORT_PLL_BIOS_2: 0x00000000
              FDI_PLL_FREQ_CTL: 0x00053687
                     PIPEACONF: 0xc0000050 (enabled, active, 6bpc)
                      HTOTAL_A: 0x059b0555 (1366 active, 1436 total)
                      HBLANK_A: 0x059b0555 (1366 start, 1436 end)
                       HSYNC_A: 0x0591057b (1404 start, 1426 end)
                      VTOTAL_A: 0x032202ff (768 active, 803 total)
                      VBLANK_A: 0x032202ff (768 start, 803 end)
                       VSYNC_A: 0x03080302 (771 start, 777 end)
                  VSYNCSHIFT_A: 0x00000000
                      PIPEASRC: 0x055502ff (1366, 768)
                 PIPEA_DATA_M1: 0x7e1308a8 (TU 64, val 0x1308a8 1247400)
                 PIPEA_DATA_N1: 0x0020f580 (val 0x20f580 2160000)
                 PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_M1: 0x00010eb4 (val 0x10eb4 69300)
                 PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
                 PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
                      DSPACNTR: 0xd8004400 (enabled)
                      DSPABASE: 0x00000000
                    DSPASTRIDE: 0x00001600 (88)
                      DSPASURF: 0x04ab7000
                   DSPATILEOFF: 0x00000000 (0, 0)
                     PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)
                      HTOTAL_B: 0x00000000 (1 active, 1 total)
                      HBLANK_B: 0x00000000 (1 start, 1 end)
                       HSYNC_B: 0x00000000 (1 start, 1 end)
                      VTOTAL_B: 0x00000000 (1 active, 1 total)
                      VBLANK_B: 0x00000000 (1 start, 1 end)
                       VSYNC_B: 0x00000000 (1 start, 1 end)
                  VSYNCSHIFT_B: 0x00000000
                      DSPBCNTR: 0x00000000 (disabled)
                      DSPBBASE: 0x00000000
                    DSPBSTRIDE: 0x00000000 (0)
                      DSPBSURF: 0x00000000
                   DSPBTILEOFF: 0x00000000 (0, 0)
                      PIPEBSRC: 0x00000000 (1, 1)
                 PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N1: 0x00000000 (val 0x0 0)
                 PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N2: 0x00000000 (val 0x0 0)
                     PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFA_CTL_2: 0x00007e80 (vscale 0.988281)
                     PFA_CTL_3: 0x00003f40 (vscale initial phase 0.494141)
                     PFA_CTL_4: 0x00007d54 (hscale 0.979126)
                   PFA_WIN_POS: 0x00000000 (0, 0)
                  PFA_WIN_SIZE: 0x00000000 (0, 0)
                     PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFB_CTL_2: 0x00000000 (vscale 0.000000)
                     PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)
                     PFB_CTL_4: 0x00000000 (hscale 0.000000)
                   PFB_WIN_POS: 0x00000000 (0, 0)
                  PFB_WIN_SIZE: 0x00000000 (0, 0)
              PCH_DREF_CONTROL: 0x00001402 (cpu source disable, ssc_source enable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 enable, ssc4 disable)
               PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
              PCH_DPLL_TMR_CFG: 0x0271186a
                PCH_SSC4_PARMS: 0x00000000
            PCH_SSC4_AUX_PARMS: 0x00000000
                  PCH_DPLL_SEL: 0x00000000 (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
           PCH_DPLL_ANALOG_CTL: 0x00008000
                    PCH_DPLL_A: 0x88046004 (enable, sdvo high speed no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk SSC, sdvo/hdmi mul 1)
                    PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)
                      PCH_FPA0: 0x00021005 (n = 2, m1 = 16, m2 = 5)
                      PCH_FPA1: 0x00021005 (n = 2, m1 = 16, m2 = 5)
                      PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                      PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                TRANS_HTOTAL_A: 0x059b0555 (1366 active, 1436 total)
                TRANS_HBLANK_A: 0x059b0555 (1366 start, 1436 end)
                 TRANS_HSYNC_A: 0x0591057b (1404 start, 1426 end)
                TRANS_VTOTAL_A: 0x032202ff (768 active, 803 total)
                TRANS_VBLANK_A: 0x032202ff (768 start, 803 end)
                 TRANS_VSYNC_A: 0x03080302 (771 start, 777 end)
            TRANS_VSYNCSHIFT_A: 0x00000000
                TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_B: 0x00000000 (1 active, 1 total)
                TRANS_HBLANK_B: 0x00000000 (1 start, 1 end)
                 TRANS_HSYNC_B: 0x00000000 (1 start, 1 end)
                TRANS_VTOTAL_B: 0x00000000 (1 active, 1 total)
                TRANS_VBLANK_B: 0x00000000 (1 start, 1 end)
                 TRANS_VSYNC_B: 0x00000000 (1 start, 1 end)
            TRANS_VSYNCSHIFT_B: 0x00000000
                TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)
                 TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)
                TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_VBLANK_C: 0x00000044 (69 start, 1 end)
                 TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)
            TRANS_VSYNCSHIFT_C: 0x00000000
                TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)
                    TRANSACONF: 0xc0000040 (enable, active)
                    TRANSBCONF: 0x00000000 (disable, inactive)
                    TRANSCCONF: 0x00000000 (disable, inactive)
                   FDI_TXA_CTL: 0xb0044000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
                   FDI_TXB_CTL: 0x00044000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
                   FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)
                   FDI_RXA_CTL: 0xb0022050 (enable, train pattern not train, port width X1, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, PCDClk)
                   FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
                   FDI_RXC_CTL: 0x00000000 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing disable, RawClk)
                  FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXC_MISC: 0x00000000 (FDI Delay 0)
               FDI_RXA_TUSIZE1: 0x7e000000
               FDI_RXA_TUSIZE2: 0x7e000000
               FDI_RXB_TUSIZE1: 0x7e000000
               FDI_RXB_TUSIZE2: 0x7e000000
               FDI_RXC_TUSIZE1: 0x00000000
               FDI_RXC_TUSIZE2: 0x00000000
                 FDI_PLL_CTL_1: 0x33505248
                 FDI_PLL_CTL_2: 0x00000000
                   FDI_RXA_IIR: 0x00000000
                   FDI_RXA_IMR: 0x000000ff
                   FDI_RXB_IIR: 0x00000000
                   FDI_RXB_IMR: 0x000000ff
                      PCH_ADPA: 0x00f40000 (disabled, transcoder A, -hsync, -vsync)
                         HDMIB: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected)
                         HDMIC: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected)
                         HDMID: 0x00000018 (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync non-detected)
                      PCH_LVDS: 0x80300302 (enabled, pipe A, 18 bit, 1 channel)
                     CPU_eDP_A: 0x00000018
                      PCH_DP_B: 0x00000018
                      PCH_DP_C: 0x00000018
                      PCH_DP_D: 0x00000018
                TRANS_DP_CTL_A: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)
                TRANS_DP_CTL_B: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)
                TRANS_DP_CTL_C: 0x00000000 (enabled, pipe A, 18 bit, 1 channel)
              BLC_PWM_CPU_CTL2: 0x80000000
               BLC_PWM_CPU_CTL: 0x0000005f
              BLC_PWM_PCH_CTL1: 0x80000000
              BLC_PWM_PCH_CTL2: 0x03d003d0
                 PCH_PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
                PCH_PP_CONTROL: 0xabcd0003 (blacklight disabled, power down on reset, panel on)
              PCH_PP_ON_DELAYS: 0x01c20fa0
             PCH_PP_OFF_DELAYS: 0x01c207d0
                PCH_PP_DIVISOR: 0x00186905
                      PORT_DBG: 0x00000000 (HW DRRS off)
            RC6_RESIDENCY_TIME: 0xffffffff
           RC6p_RESIDENCY_TIME: 0xffffffff
          RC6pp_RESIDENCY_TIME: 0xffffffff
ubuntu@ubuntu:~$

Only can enable frame buffer, Core Image stuck while loading. please help :( :'(

Link to comment
Share on other sites
TheTourist
TheTourist
Posted
Posted

Can't reach desktop, used this guide.

Also here theme with more info

org.chameleon.Boot.plist

 

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>EthernetBuiltIn</key>
    <string>Yes</string>
    <key>GraphicsEnabler</key>
    <string>Yes</string>
    <key>Graphics Mode</key>
    <string>1366x768x32</string>
    <key>Kernel</key>
    <string>mach_kernel</string>
    <key>Kernel Flags</key>
    <string>npci=0x2000</string>
    <key>Rescan</key>
    <string>Yes</string>
    <key>SkipAtiGfx</key>
    <string>Yes</string>
    <key>SkipNvidiaGfx</key>
    <string>Yes</string>
    <key>GenerateCStates</key>
    <string>Yes</string>
    <key>GeneratePStates</key>
    <string>Yes</string>
    <key>Timeout</key>
    <string>5</string>
</dict>
</plist>

 

smbios.plist

 

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>SMbiosdate</key>
    <string>21/03/12</string>
    <key>SMbiosvendor</key>
    <string>Apple Inc.</string>
    <key>SMbiosversion</key>
    <string>MBP91.88Z.00D3.B00.1203211536</string>
    <key>SMboardproduct</key>
    <string>Mac-6F01561E16C75D06</string>
    <key>SMfamily</key>
    <string>MacBook Pro</string>
    <key>SMmanufacturer</key>
    <string>Apple Inc.</string>
    <key>SMproductname</key>
    <string>MacBookPro9,2</string>
    <key>SMserial</key>
    <string>C02J5W69DTY3</string>
    <key>SMsystemversion</key>
    <string>1.0</string>
</dict>
</plist>

 

I inject intel-ig to DSDT IGPU _DSM

Also check out DSDT IGPU _DSM Method, maybe there something wrong i wrote?

dump.txt

dsdt.zip

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...