guido13456 Posted January 9, 2019 Share Posted January 9, 2019 On 12/20/2018 at 10:44 AM, IronManJFF said: Z77MXQUOAOS.H20.167X-RE-XMAX.rom hi guy s I have install Mojave via clover work s like a charm now like to install the bios I have change for the bios of JJ and did: Step #1 Finding your APFS filesystem mapping. Boot with F12 and go to UEFI shell Issue this command fs1:\System\Library\CoreServices\boot.efi Does it boot to High Sierra/Mojave ?, if so go to Step #2, if not repeat Step #1 but this time replace fs1 by fs2, fs3 ... until you get to the one that will boot in High Sierra/Mojave. Step #2 Listing current boot entries Once again go to UEFI Shell and issue this command bcfg boot dump This will output the boot list that you see when you press F12 at boot. It is a numbered list .. take note the highest number. Step #3 Adding the new boot entry Now issue theses commands (replacing italic by values we found earlier) fsn: bcfg boot addp highest number +1 System\Library\CoreServices\boot.efi "Name that you want to appear in F12 Menu" now I have replace the EFI ,for the on you have posted also have change the OzmosisDefaults.plist question for the plist when I change , do I leave it as is or change the name to Defaults.plist still can t boot need help please Link to comment Share on other sites More sharing options...
guido13456 Posted January 9, 2019 Share Posted January 9, 2019 test number 2 when I use the bios Z77MXQUOAOS.H3C.167X-RE-XMAX.ROM I get this message any of these and then black screen .. what am I doing wrong *&^%$#)( lol.. I chose option Z77MXQUOAOS.H3C.167X-RE-XMAX.ROM Link to comment Share on other sites More sharing options...
IronManJFF Posted January 9, 2019 Share Posted January 9, 2019 do I leave it as is or change the name to Defaults.plist still can t boot need help please It has to be named Defaults.plist and it has to be in /EFI/Oz on the EFI partition and you have to reset nvram for changes to take effect. Link to comment Share on other sites More sharing options...
guido13456 Posted January 9, 2019 Share Posted January 9, 2019 22 minutes ago, IronManJFF said: It has to be named Defaults.plist and it has to be in /EFI/Oz on the EFI partition and you have to reset nvram for changes to take effect. sorry for this question , what is reset nvram Command-Option-P-R. Link to comment Share on other sites More sharing options...
IronManJFF Posted January 9, 2019 Share Posted January 9, 2019 (edited) Command-Option-P-R at the boot menu .. the screen should flash red then reboot to indicate it got the command Edited January 9, 2019 by IronManJFF Link to comment Share on other sites More sharing options...
guido13456 Posted January 9, 2019 Share Posted January 9, 2019 I got the apple logo and nothing else after stay on apple logo is there a way to have you. Efi folder please remember I am not using any graphics card only the onboard one maybe something in the defaults list I need to change Link to comment Share on other sites More sharing options...
guido13456 Posted January 9, 2019 Share Posted January 9, 2019 do you think that the plist that as Mac mini 8.1 is the problem when you do not have a graphics card because the Mac mini 8.1 as a intel 650 do you think that the plist that as Mac mini 8.1 is the problem when you do not have a graphics card because the Mac mini 8.1 as a intel 650 Link to comment Share on other sites More sharing options...
guido13456 Posted January 9, 2019 Share Posted January 9, 2019 do you think that the plist that as Mac mini 8.1 is the problem when you do not have a graphics card because the Mac mini 8.1 as a intel 650 I have tried the 3 plist and it s not the plist my problem Link to comment Share on other sites More sharing options...
IronManJFF Posted January 9, 2019 Share Posted January 9, 2019 I quickly cheked thiese plist and they are not all really consistent .. I will send you one privately ( with a unique serial number) later tonite (my time) Link to comment Share on other sites More sharing options...
IronManJFF Posted January 9, 2019 Share Posted January 9, 2019 Guido -≥ I sent you a Defaults.plist, follow the instructions in my message and report back All -≥ you know that you can check your SMBIOS values from the UEFI shell .. great way to know if your Defaults.plist got applied ... dmpstore ProductFamily dmpstore ProductName dmpstore SystemSerial ... JJ -≥ Can you do another test for me with HD4000 only .... Go into BIOS Settings -≥ Peripherals -≥ IGPU Memory ... raise the default value of 32M to 384M (the lowest value a real MacMini would use) and if that does not work bring it to 1024M and test... thanks Link to comment Share on other sites More sharing options...
guido13456 Posted January 10, 2019 Share Posted January 10, 2019 1 hour ago, IronManJFF said: Guido -≥ I sent you a Defaults.plist, follow the instructions in my message and report back All -≥ you know that you can check your SMBIOS values from the UEFI shell .. great way to know if your Defaults.plist got applied ... dmpstore ProductFamily dmpstore ProductName dmpstore SystemSerial ... JJ -≥ Can you do another test for me with HD4000 only .... Go into BIOS Settings -≥ Peripherals -≥ IGPU Memory ... raise the default value of 32M to 384M (the lowest value a real MacMini would use) and if that does not work bring it to 1024M and test... thanks sorry don t understand that last message dmpstore ProductFamily dmpstore ProductName dmpstore SystemSerial ... Link to comment Share on other sites More sharing options...
guido13456 Posted January 10, 2019 Share Posted January 10, 2019 2 hours ago, IronManJFF said: Guido -≥ I sent you a Defaults.plist, follow the instructions in my message and report back All -≥ you know that you can check your SMBIOS values from the UEFI shell .. great way to know if your Defaults.plist got applied ... dmpstore ProductFamily dmpstore ProductName dmpstore SystemSerial ... JJ -≥ Can you do another test for me with HD4000 only .... Go into BIOS Settings -≥ Peripherals -≥ IGPU Memory ... raise the default value of 32M to 384M (the lowest value a real MacMini would use) and if that does not work bring it to 1024M and test... thanks sorry don t understand that last message dmpstore ProductFamily dmpstore ProductName dmpstore SystemSerial ... oufff nothing lol here is what I am using I am able to boot to my Mac, Z77MXQUOAOS.H20.167X-RE-XMAX.rom Efi.zip Link to comment Share on other sites More sharing options...
IronManJFF Posted January 10, 2019 Share Posted January 10, 2019 Your name is no JJ Si you placed the Defaults.plist I sent you and it is now working. Your gratitude is noted. Link to comment Share on other sites More sharing options...
guido13456 Posted January 10, 2019 Share Posted January 10, 2019 sorry no not working at all Link to comment Share on other sites More sharing options...
IronManJFF Posted January 10, 2019 Share Posted January 10, 2019 You said you were able to boot it ,, what is your problrm now ?You said you were able to boot it ,, what is your problrm now ? Link to comment Share on other sites More sharing options...
guido13456 Posted January 10, 2019 Share Posted January 10, 2019 question you do not use the internal intel 4000 was there any one that you help that did on this blood ^ Link to comment Share on other sites More sharing options...
IronManJFF Posted January 10, 2019 Share Posted January 10, 2019 No I don't use HD4000.. Sad truth is that almost no one does. I know of no one using this motherboard with HD4000 and Mojave. But there were people using it with HD4000 and High Sierra ... so there is a little missing piece. Link to comment Share on other sites More sharing options...
guido13456 Posted January 10, 2019 Share Posted January 10, 2019 So I need to buy a graphics card ? Or go whit clover option that work s Will my Nvidia gtx750 work So I need to buy a graphics card ? Or go whit clover option that work s Link to comment Share on other sites More sharing options...
IronManJFF Posted January 10, 2019 Share Posted January 10, 2019 Nividia GTX will not work for Mojave because there is no Nvidia Web drivers at this time. High Sierra will workYou can try to increase iGPU memory size in BIOS like I asked JJ. It could be related as a real MacMini using HD4000 would use from 384M to 1024M of shared memory but the default for our board is 32M. So I am hoping that by raising the minimal value to 384M that it will enable you to use HD4000. Link to comment Share on other sites More sharing options...
guido13456 Posted January 10, 2019 Share Posted January 10, 2019 On 1/6/2019 at 10:25 PM, elviejo said: So there is now two people succeeding with an external GPU, apparently this new Mojave don't work well with Intel HD 4000 GPU. it work well whit clover .... now I am trying the old way and I am getting no where need help please Link to comment Share on other sites More sharing options...
IronManJFF Posted January 10, 2019 Share Posted January 10, 2019 If it can work with Clover then I don't see why it would not with Ozmosis. Have you tried to increase IGPU Memory in BIOS like I suggested ? About that GTX750, is it installed on the board (don't install it if it is not installed atm) ? Link to comment Share on other sites More sharing options...
guido13456 Posted January 10, 2019 Share Posted January 10, 2019 On 10/20/2018 at 9:53 PM, dindu5678 said: First and foremost thank you for the great help this community has put together in order to keep the QUO motherboard alive! Yesterday I decided to upgrade my old OSX 10.10.5 setup to 10.13.6 by following the bits and pieces throughout this thread and I was able to complete the upgrade successfully, however I now have two problems: 1) In the BIOS boot options I no longer see the Linux drive that I was able to select prior to the upgrade. When I through the process of upgrading I unplugged all additional drives and only left the one with OSX 10.10 plugged in. Note that after installing High Sierra I had to follow the instructions in the following comment in order to even get my High Sierra to boot, which is located on fs3. My LVM-encrypted Linux drive is on fs7. How can I boot into my Linux drive? I do see in the SATA configuration that it is properly connected. 2) My wireless keyboard mapping is quite strange as it appears that the FN key is now permanently pressed. For example, after QWERTY it outputs 456* for the keys UIOP, which I normally would have to press FN to get those values. This is the same behavior for all other keys which also have FN options. Thanks in advance for the help. Hi when I do the line I get a blancs screen Link to comment Share on other sites More sharing options...
guido13456 Posted January 10, 2019 Share Posted January 10, 2019 On 11/18/2018 at 11:50 AM, jjrecort said: Got it, this is what I was guessing and was going to be my next question/comment about. So I just need to look for the serial of any modern (Mojave suitable) mac - like my macbook pro - or has to be iMac 13,2 for some specific reason in order to wok? Just asking to understand a bit more how it works Hi I was ready back text and I see that you have one quo that as no Graf card How did you get it to work on Mojave ? 3 hours ago, IronManJFF said: Nividia GTX will not work for Mojave because there is no Nvidia Web drivers at this time. High Sierra will work You can try to increase iGPU memory size in BIOS like I asked JJ. It could be related as a real MacMini using HD4000 would use from 384M to 1024M of shared memory but the default for our board is 32M. So I am hoping that by raising the minimal value to 384M that it will enable you to use HD4000. Sniff sniff no it did not work ... Link to comment Share on other sites More sharing options...
IronManJFF Posted January 10, 2019 Share Posted January 10, 2019 (edited) Try to reset CMOS. CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. Open: Normal Short: Clear CMOS Values • Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. • After systemrestart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) ... Edited January 10, 2019 by IronManJFF Link to comment Share on other sites More sharing options...
Casm101 Posted January 10, 2019 Share Posted January 10, 2019 9 hours ago, IronManJFF said: No I don't use HD4000.. Sad truth is that almost no one does. I know of no one using this motherboard with HD4000 and Mojave. But there were people using it with HD4000 and High Sierra ... so there is a little missing piece. I’m currently running the latest developer version of Mojave on the Intel HD4000 graphics and I had no problems installing vanilla MacOS... 7 hours ago, guido13456 said: So I need to buy a graphics card ? Or go whit clover option that work s Will my Nvidia gtx750 work So I need to buy a graphics card ? Or go whit clover option that work s If you feel the need to get a graphics card it’s worth investing in an AMD Radeon Link to comment Share on other sites More sharing options...
Recommended Posts