Jump to content

OS X compatible motherboard -> QUO

meklort

By meklort,
in New Releases and Updates

 Share
4,397 posts in this topic

Recommended Posts

IronManJFF
IronManJFF
Posted
Posted
2 hours ago, tlogan23 said:

Ok I've adjusted my Default.plist to the above data and did the 4 finger salute. I try booting from the Mohave (non-clover version) and I still get the crossed circle. As I said I am just using the clover usb so I can gain access to a terminal to set nvram. I also notice, that if I go into the efi shell, and do the dmpstore, the date and version does not match.

Your Defaults.plist is still being rejected if you get the no-no sign ... Your BaseBoardSerial does not jive with your SystemSerial

 

1 hour ago, jjrecort said:

 

Hi there!

 

I have tried UEFI shell

The systems appears to be in fs1

and the EFI on fs3

but again all folders are empty.

 

Where I cant look now?

where the defaults.plist file mus be located?

 

Thank you al lot (again!)

 

 

It has to be on fs0: if you want to avoid a bag of hurt

 

 

Both of you...Build signature .. Detailed

Below is a valid Defaults.plist file template for iMac 13,2... put in the serial... you don't need any more variable

  

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Version</key>
	<string>1.0.1</string>
	<key>Date</key>
	<integer>0</integer>
	<key>Defaults:4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102</key>
	<dict>
		<key>BiosDate</key>
		<string>09/17/2018</string>
		<key>BiosVersion</key>
		<string>IM131.88Z.F000.B00.1809171346</string>
		<key>FirmwareFeatures</key>
		<integer>3759006007</integer>
		<key>FirmwareFeaturesMask</key>
		<integer>4280287039</integer>
		<key>ProductId</key>
		<string>Mac-FC02E91DDD3FA6A4</string>
		<key>ProductFamily</key>
		<string>iMac</string>
		<key>ProductName</key>
		<string>iMac13,2</string>
		<key>SystemSerial</key>
		<string>INSERT IMAC 13,2 SERIAL HERE</string>
		<key>BaseBoardSerial</key>
		<string>INSERT IMAC 13,2 SERIAL + 5 DIGITS HERE </string>
	</dict>
	<key>Defaults:7C436110-AB2A-4BBB-A880-FE41995C9F82</key>
	<dict>
		<key>boot-args</key>
		<string>-v</string>
		<key>csr-active-config</key>
		<integer>103</integer>
	</dict>
	<key>Defaults:1F8E0C02-58A9-4E34-AE22-2B63745FA101</key>
	<dict>
		<key>DisableNvidiaInjection</key>
		<true/>
		<key>BootEntryTemplate</key>
		<string>$label</string>
		<key>DarwinDiskTemplate</key>
		<string>$label $platform.$major.$minor</string>
		<key>DarwinRecoveryDiskTemplate</key>
		<string>$label $platform.$major.$minor</string>
	</dict>
</dict>
</plist>

 

Link to comment
Share on other sites
tlogan23
tlogan23
Posted
Posted
1 hour ago, IronManJFF said:

Your Defaults.plist is still being rejected if you get the no-no sign ... Your BaseBoardSerial does not jive with your SystemSerial

 

It has to be on fs0: if you want to avoid a bag of hurt

 

 

Both of you...Build signature .. Detailed

Below is a valid Defaults.plist file template for iMac 13,2... put in the serial... you don't need any more variable

  


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Version</key>
	<string>1.0.1</string>
	<key>Date</key>
	<integer>0</integer>
	<key>Defaults:4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102</key>
	<dict>
		<key>BiosDate</key>
		<string>09/17/2018</string>
		<key>BiosVersion</key>
		<string>IM131.88Z.F000.B00.1809171346</string>
		<key>FirmwareFeatures</key>
		<integer>3759006007</integer>
		<key>FirmwareFeaturesMask</key>
		<integer>4280287039</integer>
		<key>ProductId</key>
		<string>Mac-FC02E91DDD3FA6A4</string>
		<key>ProductFamily</key>
		<string>iMac</string>
		<key>ProductName</key>
		<string>iMac13,2</string>
		<key>SystemSerial</key>
		<string>INSERT IMAC 13,2 SERIAL HERE</string>
		<key>BaseBoardSerial</key>
		<string>INSERT IMAC 13,2 SERIAL + 5 DIGITS HERE </string>
	</dict>
	<key>Defaults:7C436110-AB2A-4BBB-A880-FE41995C9F82</key>
	<dict>
		<key>boot-args</key>
		<string>-v</string>
		<key>csr-active-config</key>
		<integer>103</integer>
	</dict>
	<key>Defaults:1F8E0C02-58A9-4E34-AE22-2B63745FA101</key>
	<dict>
		<key>DisableNvidiaInjection</key>
		<true/>
		<key>BootEntryTemplate</key>
		<string>$label</string>
		<key>DarwinDiskTemplate</key>
		<string>$label $platform.$major.$minor</string>
		<key>DarwinRecoveryDiskTemplate</key>
		<string>$label $platform.$major.$minor</string>
	</dict>
</dict>
</plist>

 

Ok did that, now I don't get an imediate

 

1 hour ago, IronManJFF said:

Your Defaults.plist is still being rejected if you get the no-no sign ... Your BaseBoardSerial does not jive with your SystemSerial

 

It has to be on fs0: if you want to avoid a bag of hurt

 

 

Both of you...Build signature .. Detailed

Below is a valid Defaults.plist file template for iMac 13,2... put in the serial... you don't need any more variable

  


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Version</key>
	<string>1.0.1</string>
	<key>Date</key>
	<integer>0</integer>
	<key>Defaults:4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102</key>
	<dict>
		<key>BiosDate</key>
		<string>09/17/2018</string>
		<key>BiosVersion</key>
		<string>IM131.88Z.F000.B00.1809171346</string>
		<key>FirmwareFeatures</key>
		<integer>3759006007</integer>
		<key>FirmwareFeaturesMask</key>
		<integer>4280287039</integer>
		<key>ProductId</key>
		<string>Mac-FC02E91DDD3FA6A4</string>
		<key>ProductFamily</key>
		<string>iMac</string>
		<key>ProductName</key>
		<string>iMac13,2</string>
		<key>SystemSerial</key>
		<string>INSERT IMAC 13,2 SERIAL HERE</string>
		<key>BaseBoardSerial</key>
		<string>INSERT IMAC 13,2 SERIAL + 5 DIGITS HERE </string>
	</dict>
	<key>Defaults:7C436110-AB2A-4BBB-A880-FE41995C9F82</key>
	<dict>
		<key>boot-args</key>
		<string>-v</string>
		<key>csr-active-config</key>
		<integer>103</integer>
	</dict>
	<key>Defaults:1F8E0C02-58A9-4E34-AE22-2B63745FA101</key>
	<dict>
		<key>DisableNvidiaInjection</key>
		<true/>
		<key>BootEntryTemplate</key>
		<string>$label</string>
		<key>DarwinDiskTemplate</key>
		<string>$label $platform.$major.$minor</string>
		<key>DarwinRecoveryDiskTemplate</key>
		<string>$label $platform.$major.$minor</string>
	</dict>
</dict>
</plist>

 

Ok now I don't get an immediate stop sign, but it just sits there after I select and installer. USB light is flashing, but I my screen is showing the boot selector screen. Thank you for your help! tim

 

Link to comment
Share on other sites
guido13456
guido13456
Posted
Posted
On 6/28/2018 at 6:57 PM, IronManJFF said:

ROM image compatible with MacOS Mojave (works with previous OS too )

Infinite thanks @Cecekpawon and @TypeThree for providing a solution for Kext injection

I merely assembled it for our beloved motherboard

Z77MXQUOAOS.H20.167X-XMAX.ROM

Good afternoon ,small question . if I use this new bios 

i am using a only the on-board intel graphics card 

 

Just now, guido13456 said:

Good afternoon ,small question . if I use this new bios 

i am using a only the on-board intel graphics card 

 

 

Link to comment
Share on other sites
jjrecort
jjrecort
Posted
Posted
11 hours ago, IronManJFF said:

/EFI/Oz/Defaults.plist

Ok, that was pretty easy..

 

So then I don't have the defaults.plist on any of the 2 QUO computers I have right now (one is mine - the one on the signature) and the other is my dad's wich is just the motherboard (no graphics card).


Actually I don't recall putting manually any of these files, on my Dad's computer I'm sure I didn't, I just updated the BIOS and that's all. On my rackmount I was hesitating, as i wasn't recalling if last year when you helped me to upgrade to El Capitan, we did the defaults. plist.

 

So now is clear I will copy the file and see what happens!

 

THANKS a lot!

 

 

Link to comment
Share on other sites
jjrecort
jjrecort
Posted
Posted
5 hours ago, IronManJFF said:

You did not need it then because you are simulating a MacPro3,1 and that is the firmware's default. But you cannot use MacPro3,1 on a modern OS...

Got it, this is what I was guessing and was going to be my next question/comment about.

So I just need to look for the serial of any modern (Mojave suitable) mac - like my macbook pro - or has to be iMac 13,2 for some specific reason in order to wok?

 

Just asking to understand a bit more how it works

 

 

Link to comment
Share on other sites
tlogan23
tlogan23
Posted
Posted

I am on too many forums. I've updated my signature. :-)

On 11/16/2018 at 4:00 PM, tlogan23 said:

Ok did that, now I don't get an imediate

 

Ok now I don't get an immediate stop sign, but it just sits there after I select and installer. USB light is flashing, but I my screen is showing the boot selector screen. Thank you for your help! tim

 

Not sure why, but for some reason it only now accepted my 4 finger salute. So the dmpstore for the bios date and version now match nvram. Booting from the Mohave USB installer, seems to hang at HID: Legacy shim 2 and then the screen locks with a funky look. I am going to try to us my Zotac Video card (GTX470) and see if I can get farther. Thank you for all the help IronManJFF

Link to comment
Share on other sites
tlogan23
tlogan23
Posted
Posted
29 minutes ago, tlogan23 said:

I am on too many forums. I've updated my signature. :-)

Not sure why, but for some reason it only now accepted my 4 finger salute. So the dmpstore for the bios date and version now match nvram. Booting from the Mohave USB installer, seems to hang at HID: Legacy shim 2 and then the screen locks with a funky look. I am going to try to us my Zotac Video card (GTX470) and see if I can get farther. Thank you for all the help IronManJFF

found that this error can be related to the USB port, so I used a different port (on back). Looks like it worked, waiting for the system to come up after the reboot from installer. not sure how Mohave will behave with my GTX470, but I will soon find out.

Link to comment
Share on other sites
tlogan23
tlogan23
Posted
Posted
19 hours ago, tlogan23 said:

found that this error can be related to the USB port, so I used a different port (on back). Looks like it worked, waiting for the system to come up after the reboot from installer. not sure how Mohave will behave with my GTX470, but I will soon find out.

Well, success finally. I am now completely dual booting between Mohave and Win10Pro and apparently Mohave is ok with my GTX470. Thank you IronManGFF for your help, I guess between the USB port and the 4 finger salute issue was the final missing part of the equation.

To be clear to anyone else, if your system does do a 4 finger salute properly then the values of the Efi/Oz/Default.plist should show up in your NVRAM (dmpstore -b). Something that I had forgotten about since I had installed Yosemite with this board.

IMG_20181119_214756.jpg

Link to comment
Share on other sites
guido13456
guido13456
Posted
Posted
On 11/17/2018 at 11:00 PM, IronManJFF said:

Maybe you should rephrase, not sure what the question is ...

 

You can also ask me in French if that is easier for you

 

On 11/21/2018 at 7:28 AM, IronManJFF said:

Glad you have it working, enjoy.

Will this bios work also for the on-board graphics card 

Thank you .. 

Link to comment
Share on other sites
guido13456
guido13456
Posted
Posted
On 11/26/2018 at 10:49 AM, guido13456 said:

 

Will this bios work also for the on-board graphics card 

Thank you .. 

Bonjour voilà la question si j install le nouveau le bios ,il vas fonctionné comme les autre ?

comme un Mac ?

moi ça fonctionne pas ... est il possible d’expliquer svp quoi faire dans le bios

pour que le nouveau Mojave fonctionne bien 

merci 

Link to comment
Share on other sites
guido13456
guido13456
Posted
Posted
14 minutes ago, guido13456 said:

Bonjour voilà la question si j install le nouveau le bios ,il vas fonctionné comme les autre ?

comme un Mac ?

moi ça fonctionne pas ... est il possible d’expliquer svp quoi faire dans le bios

pour que le nouveau Mojave fonctionne bien 

merci 

Utilisé tu clover ?

 

Link to comment
Share on other sites
IronManJFF
IronManJFF
Posted
Posted
5 hours ago, elviejo said:

IronManJFF, Hi, could you post the EFI folder you are using, I'm having the no booting again with 10.14.1 and want to see if the contents on the EFI folder are the culprit. Thanks.:)

You mean my Defaults.plist .. sure as soon as i get home (there was a firmware update with 10.14.1 so you have to adjust BiosDate and BiosVersion...at least for iMac13,2).

 

5 hours ago, VerizonLover said:

Fail. Website down and obviously the product is dead.

Your non-contribution has been noted. You are obviously in need of attention. You had your moment , now GTFO.

Link to comment
Share on other sites
IronManJFF
IronManJFF
Posted
Posted (edited) 
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Version</key>
	<string>1.0.1</string>
	<key>Date</key>
	<integer>0</integer>
	<key>Defaults:4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102</key>
	<dict>
		<key>BiosDate</key>
		<string>09/17/2018</string>
		<key>BiosVersion</key>
		<string>IM131.88Z.F000.B00.1809171346</string>
		<key>FirmwareFeatures</key>
		<integer>0xE00DE137</integer>
		<key>FirmwareFeaturesMask</key>
		<integer>0xFF1FFF3F</integer>
		<key>ProductId</key>
		<string>Mac-FC02E91DDD3FA6A4</string>
		<key>ProductFamily</key>
		<string>iMac</string>
		<key>ProductName</key>
		<string>iMac13,2</string>
		<key>SystemSerial</key>
		<string>PUT YOUR OWN</string>
		<key>BaseBoardSerial</key>
		<string>PUT YOUR OWN+5DIGITS</string>
	</dict>
	<key>Defaults:7C436110-AB2A-4BBB-A880-FE41995C9F82</key>
	<dict>
		<key>boot-args</key>
		<string>-v nvda_drv=1</string>
		<key>csr-active-config</key>
		<integer>103</integer>
	</dict>
	<key>Defaults:1F8E0C02-58A9-4E34-AE22-2B63745FA101</key>
	<dict>
                <key>DisableNvidiaInjection</key>
                <true/> 
		<key>BootEntryTemplate</key>
		<string>$label</string>
		<key>DarwinDiskTemplate</key>
		<string>$label $platform.$major.$minor</string>
		<key>DarwinRecoveryDiskTemplate</key>
		<string>$label $platform.$major.$minor</string>
	</dict>
</dict>
</plist>

 

For MacMini6,2 ...Not tested but should be ...

  

	<dict>
		<key>BiosDate</key>
		<string>09/17/2018</string>
		<key>BiosVersion</key>
		<string>MM61.88Z.F000.B00.1809171514</string>
		<key>FirmwareFeatures</key>
		<integer>0xE00DE137</integer>
		<key>FirmwareFeaturesMask</key>
		<integer>0xFF1FFF3F</integer>
		<key>ProductId</key>
		<string>Mac-F65AE981FFA204ED</string>
		<key>ProductFamily</key>
		<string>Mac mini</string>
		<key>ProductName</key>
		<string>Macmini6,2</string>
		<key>SystemSerial</key>
		<string>YOURS</string>
		<key>BaseBoardSerial</key>
		<string>YOURS+5DIGITS</string>
	</dict>

 

Edited by IronManJFF
  • Like 1
Link to comment
Share on other sites
elviejo
elviejo
Posted
Posted

No, is not the Defaults.plist, it is something else, you remember this happened with the beta5 and later the problem got away after beta6? must be something like the aptiofix in the Oz rom because booting with a usb with clover it boots ok only that I don't want to use Clover. I was trying to see if you used something else in the Efi/Oz folder. Thanks anyway, lets keep investigating, keep you posted.:(

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...