Riley Freeman Posted November 26, 2015 Share Posted November 26, 2015 Leave "Download with Secured Download manager" uncheck Aha! I didn't realise that was a checkbox because it looked greyed out. Link to comment Share on other sites More sharing options...
crusher Posted November 26, 2015 Share Posted November 26, 2015 Tested and work perfect. Link to comment Share on other sites More sharing options...
LockDown Posted November 26, 2015 Share Posted November 26, 2015 Congratz oz users Link to comment Share on other sites More sharing options...
rakimbadu Posted November 26, 2015 Share Posted November 26, 2015 After the update i can boot my El Capitan hdd while i cannot boot the Windows 10 hdd anymore. In boot selection screen i select Windows boot manager than nothing, screen stay black. I had to reinstall the previous bios in order to boot Windows . Anyone had this problem? Link to comment Share on other sites More sharing options...
MacGrummel Posted November 26, 2015 Share Posted November 26, 2015 I've got just one bug: in "About this Mac" my Quo shows 24GB 1600MHz DDR3 (three parts), not the real 16GB (two parts).. Link to comment Share on other sites More sharing options...
crusher Posted November 26, 2015 Share Posted November 26, 2015 I've got just one bug: in "About this Mac" my Quo shows 24GB 1600MHz DDR3 (three parts), not the real 16GB (two parts).. Maybe wrong settings in bios. You must put memory to profile1 Link to comment Share on other sites More sharing options...
CiTroNaK Posted November 26, 2015 Share Posted November 26, 2015 It does not work for me. After update, it shows only black screen = no output, nothing. I had to recover BIOS from backup. Link to comment Share on other sites More sharing options...
MattsCreative Posted November 26, 2015 Share Posted November 26, 2015 It does not work for me. After update, it shows only black screen = no output, nothing. I had to recover BIOS from backup. Same issue black screen on both quo board and normal z97 board edit: fixed wit injectorkext.ffs and disablerkext.ffs Link to comment Share on other sites More sharing options...
Kynyo Posted November 26, 2015 Share Posted November 26, 2015 Flash BIOS using integrated GPU, then do BIOS setup, and replug your dedicated graphics card! This should do the trick! Link to comment Share on other sites More sharing options...
IronManJFF Posted November 26, 2015 Share Posted November 26, 2015 Z77MXQUOAOS.H2N.OZ1669M - BASED ON Z77MXQUOAOS.F2N BIOS This is interesting .. we go from H3C to H2N based on F2N (one wonders about SLI under Win). Not a good time for me to test it right now but will try to upgrade once i am done with my current project. Can't wait to see more reports on the new BIOS from fellow users about : Fusion Drive RAID drive Installing El Cap from scratch Upgrading Y to El Cap Filevault (boot drive) AirPlay My thanks to anyone who contributed to the new release. Link to comment Share on other sites More sharing options...
Micky1979 Posted November 27, 2015 Share Posted November 27, 2015 Cleaned last Off Topic posts. Please make a report when this happen again. Link to comment Share on other sites More sharing options...
THe KiNG Posted November 27, 2015 Share Posted November 27, 2015 Cleaned last Off Topic posts. Please make a report when this happen again. Yes but you left the one that made the offtopic, I will quote those. same issue black screen Flash BIOS using integrated GPU, then do BIOS setup, and replug your dedicated graphics card! This should do the trick! ^^ This one. I've got just one bug: in "About this Mac" my Quo shows 24GB 1600MHz DDR3 (three parts), not the real 16GB (two parts).. Looks like there is a bug on SMBios. It does not work for me. After update, it shows only black screen = no output, nothing. I had to recover BIOS from backup. From your signature seems you tested the BIOS and not something else... Post your configuration like number/what displays you have and connected to what ports(Internal GPU? Dedicated GPU? Both?) Also bdmesg(darwindumper) before flash will help. Link to comment Share on other sites More sharing options...
Micky1979 Posted November 27, 2015 Share Posted November 27, 2015 Yes but you left the one that made the offtopic, I will quote those. Sure, it will be so THe KING consider (if you are intrested in) to share the uncompressed layoutX.xml, the PathMaps and the pinconfiguration (as well for custom bin patch) used to patch AppleHDA on QUO mobo.. look here, I can add to it to automate the process (also the app can update remotely in case of changes)... Link to comment Share on other sites More sharing options...
CiTroNaK Posted November 27, 2015 Share Posted November 27, 2015 From your signature seems you tested the BIOS and not something else... Post your configuration like number/what displays you have and connected to what ports(Internal GPU? Dedicated GPU? Both?) Also bdmesg(darwindumper) before flash will help. I am using internal GPU with DisplayPort cable. First I thought that could be Thunderbolt/DisplayPort problem, so I tested same display with HDMI cable and got same results after restart. There is complete dupm from DarwinDumper https://dl.dropboxusercontent.com/u/29924102/DarwinDumper_2.9.9.1_Apple_X64_Yos.zip Now, I am back on H3C.1479. Thank you. Link to comment Share on other sites More sharing options...
crusher Posted November 27, 2015 Share Posted November 27, 2015 Problem on Defaults.plist. Can you sent me your rom. Link to comment Share on other sites More sharing options...
CiTroNaK Posted November 27, 2015 Share Posted November 27, 2015 Problem on Defaults.plist. Can you sent me your rom. Sorry for asking - who should send you the rom? I don't know if you reacted on my post or someone else. Thank you. Link to comment Share on other sites More sharing options...
crusher Posted November 27, 2015 Share Posted November 27, 2015 Sorry for asking - who should send you the rom? I don't know if you reacted on my post or someone else. Thank you. You. I quote your post. Link to comment Share on other sites More sharing options...
CiTroNaK Posted November 27, 2015 Share Posted November 27, 2015 You. I quote your post. Ah. Sorry. I tried Z77MXQUOAOS.H2N.OZ1669M that I found on http://www.datafilehost.com/d/223f012b. Now I am back on https://github.com/tuxuser/OzmosisBIOS/raw/master/Z77MXQUOAOS.H3C.1479.zip. I am sorry for misunderstanding If you needed something else from me. Thank you. Link to comment Share on other sites More sharing options...
THe KiNG Posted November 27, 2015 Share Posted November 27, 2015 Sure, it will be so THe KING consider (if you are intrested in) to share the uncompressed layoutX.xml, the PathMaps and the pinconfiguration (as well for custom bin patch) used to patch AppleHDA on QUO mobo.. look here, I can add to it to automate the process (also the app can update remotely in case of changes)... Everything you may need is on WIKI Pin configurations are done by Ozmosis at boot time depending if AppleHda or VoodooHda is used. Since voodoohda works from BIOS I dont see the need of patching applehda anymore since voodoo take cover of built in audio while applehda cover the discreet gfx part, they work together pretty well. But however do whatever you like... I am using internal GPU with DisplayPort cable. First I thought that could be Thunderbolt/DisplayPort problem, so I tested same display with HDMI cable ... And the display is? Same display works with original F2N BIOS(that came with the board)? Link to comment Share on other sites More sharing options...
CiTroNaK Posted November 27, 2015 Share Posted November 27, 2015 And the display is? Same display works with original F2N BIOS(that came with the board)? Yes, it works with the backup BIOS without any problems. It is an old LG Flatron L2000CN. Link to comment Share on other sites More sharing options...
THe KiNG Posted November 27, 2015 Share Posted November 27, 2015 Yes, it works with the backup BIOS without any problems. It is an old LG Flatron L2000CN. Weird I don't see any Displayport or HDMI on that monitor, only VGA and DVI Are you using adaptors? The monitor you are using does not have standard aspect ratio and may cause issues... As I see it can be from 2 updated drivers Intel UEFI GOP driver or HermitCsMVideo. Try to replace them one by one with those from working BIOS until you locate the bug... You can also try to set with AMIBCP on display initialisation to Legacy only on BIOS and flash/test. Link to comment Share on other sites More sharing options...
CiTroNaK Posted November 27, 2015 Share Posted November 27, 2015 Weird I don't see any Displayport or HDMI on that monitor, only VGA and DVI Are you using adaptors? The monitor you are using does not have standard aspect ratio and may cause issues... As I see it can be from 2 updated drivers Intel UEFI GOP driver or HermitCsMVideo. Try to replace them one by one with those from working BIOS until you locate the bug... You can also try to set with AMIBCP on display initialisation to Legacy only on BIOS and flash/test. Thank you for your answer. Yes, I use DP -> DVI adapter. I have not the knowledge to replace the drivers. Could you please direct me to the source (url or topic here) where I can find the way to work with it and replace the drivers? I will try to find other display and test the bios with it. It would be easiest way to solve the issue. Thank you again. Link to comment Share on other sites More sharing options...
THe KiNG Posted November 27, 2015 Share Posted November 27, 2015 Yes, I use DP -> DVI adapter. Why? The board have DVI port, why you are not using it? Using MiniDisplayPort adapters is a very bad idea, and 99.9 % cases will lead to problems. For example I have native DisplayPort Retina Display, using MDP->DP adaptor make it unusable for boot display, it gets kicked when in OS but not usable at BIOS level. Link to comment Share on other sites More sharing options...
CiTroNaK Posted November 27, 2015 Share Posted November 27, 2015 Why? The board have DVI port, why you are not using it? Using MiniDisplayPort adapters is a very bad idea, and 99.9 % cases will lead to problems. For example I have native DisplayPort Retina Display, using MDP->DP adaptor make it unusable for boot display, it gets kicked when in OS but not usable at BIOS level. DVI cable was damaged and I had this adapter available. Thank you for this information. Link to comment Share on other sites More sharing options...
Micky1979 Posted November 27, 2015 Share Posted November 27, 2015 Everything you may need is on WIKI Pin configurations are done by Ozmosis at boot time depending if AppleHda or VoodooHda is used. Since voodoohda works from BIOS I dont see the need of patching applehda anymore since voodoo take cover of built in audio while applehda cover the discreet gfx part, they work together pretty well. But however do whatever you like... Roger, so nothing will be done. I asked only because I had seen a package to update AppleHDA for the QUO mobo somewhere. But I understand now that is a deprecated thing. Link to comment Share on other sites More sharing options...
Recommended Posts