DSDT Dell 7720/Help injecting Ethernet

[WaldMeister]

Hi,

 

I need some help injecting my ethernet card into my DSDT. Found some solutions scattered around the web, but none of them seem to inject specific hardware information, which is needed.

 

Attached my current DSDT and ioreg file. The "airport" device is located under RP01, i think the information needs to be injected somewhere near that location.

 

Thanks for the help in advance.

ioreg.txt

DSDT.aml.zip

[iFIRE]

Use DSDT Editor and inject the patch.

 

 

 

Atheros 9285.txt

[WaldMeister]

Use DSDT Editor and inject the patch.

 

 

 

Atheros 9285.txt

 

Wifi works, it's about the Realtek ethernet, should have been more specific, sorry.

The realtek ethernet (lan) works now, by installing a kext from the realtek page, but i would like to inject it using dsdt.

 

Thanks for the reply.

[WaldMeister]

Device was RP05.

 

           Device (LAN0)
           {
               Name (_ADR, Zero)
               Name (_SUN, 0x03)
               Name (_PRW, Package (0x02)
               {
                   0x0B, 
                   0x04
               })
               Method (_DSM, 4, NotSerialized)
               {
                   Store (Package (0x0C)
                       {
                           "built-in", 
                           Buffer (One)
                           {
                                0x00
                           }, 
                           "location", 
                           Buffer (0x02)
                           {
                               "1"
                           }, 
                           "network-type", 
                           Buffer (0x09)
                           {
                               "ethernet"
                           }, 
                           "revision-id", 
                           Buffer (0x04)
                           {
                                0x05, 0x00, 0x00, 0x00
                           }, 
                           "model", 
                           Buffer (0x22)
                           {
                               "Realtek RTL810SE Gigabit Ethernet"
                           }, 
                           "name", 
                           Buffer (0x09)
                           {
                               "ethernet"
                           }
                       }, Local0)
                   DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                   Return (Local0)
               }
           }

 

Adding the above should work.

[iFIRE]

Patched.zip

[WaldMeister]

Patched.zip

 

Learned from that edit, thanks, cleaner code that way.