Jump to content

HELP TOPIC - for help in OS X Yosemite (10.10) and below

Deltac0

By Deltac0,
in General Discussion

 Share
2,805 posts in this topic

Recommended Posts

gils83
gils83
Posted
Posted

THANKS!! To you and to Spakk. It works!

alllp here is for you:

 

1. Download this:

 

 

2. Run kextwizzard and install them both. Don't forget to choose the backup option.

3. DO NOT use kextwizard to fix permissions, use disk utility

4. If you have deleted { AppleGraphicsControl.kext, AppleTyMCEDriver.kext and AppleUpstreamUserClient.kext }, just put back AppleGraphicsControl.kext in S/L/E (fix permissions again)

5. Reboot and enjoy!

 

Btw it's running super fast :D

 

it is useless to remove AppleGraphicsControl.kext, AppleTyMCEDriver.kext and AppleUpstreamUserClient.kext ;)

Link to comment
Share on other sites
NikeFreak
NikeFreak
Posted
Posted

guys have long been urgent problem, long ago put poppy originally 10.7.5, 10.8.5 and then, and then 10.9.0-10.9.2, and everywhere there were different kinds of problems. just recently established 10.10.0 and 10.10.5 updated on almost everything works as expected, the problems did not notice, but one that has always been with me, it crashes in Adobe programs.

 

ребята есть давно наболевший вопрос, еще давно ставил мак, сначало 10.7.5, потом 10.8.5, а потом 10.9.0-10.9.2, и везде были разные рода проблемы. вот недавно установил 10.10.0 и обновил на 10.10.5, почти все работает как положено, проблем не замечал, кроме одной, которая всегда была у меня, это вылеты в программах адобе.

Link to comment
Share on other sites
Duran Keeley
Duran Keeley
Posted
Posted (edited)

it crashes in Adobe programs.

What programs are you using & what programs versions?

 

Did you try the solutions in this topic? http://www.insanelymac.com/forum/topic/286124-adobe-cs6-master-collection-snow-leopard-lion-mountain-lion

 

Can someone confirm if this topic is still relevant with the new advances in the kernel development? I can't test as the only two systems I have are my Macbook & My Intel desktop.

Edited by Duran Keeley
Typo
  • Like 1
Link to comment
Share on other sites
NikeFreak
NikeFreak
Posted
Posted

What programs are you using & what programs?

 

 

I use Adobe Premiere Pro CC 2015 it crashes if you apply the effect of stabilizing the video, it was still on the previous versions of the MAC OS and Adobe CC and CC 2014. Now the situation is the same, not what has not changed. although the last time I replaced the motherboard, and the schedule set by AMD instead of HB. but Adobe is still working correctly. apparently this is a problem kernel is likely to use some sort of instruction is not correctly compiled in the kernel for AMD processors. I think so

 

я использую Adobe Premiere Pro CC 2015 , он вылетает если применить эффект стабилизации видео, это было еще на прошлых версиях МАК ОС и Adobe CC и CC 2014. сейчас ситуация такая же, не чего не изменилось. хотя я с прошлого времени заменил материнскую плату, и графику поставил от АМД вместо НВ. но Adobe все равно работает с ошибкам. видимо это проблема ядра, скорее всего используется какая то инструкция, не правильно компилируемая в ядре для процессоров АМД. я так думаю

Link to comment
Share on other sites
spakk
spakk
Posted
Posted

Congratulations, it was like a hard bowel movements but after work feels one liberated. :D

try CINEBENCH R15

Link to comment
Share on other sites
alllp
alllp
Posted
Posted

guys, I don't know how to put an image to the forums too, what a shame

 

on the other hand, what is wrong with my sound, it has ALC 887 chip and IO shows layout 1, I did layout one and installed AppleHDA and HDAEnabler1.kext with boot plist 

 

<key>HDAEnabler</key>

<string>Yes</string>
<key>HDAULayoutID</key>
<string>1</string>
<key>HDEFLayoutID</key>
<string>1</string>

 

Screen_Shot_2015_09_30_at_23_25_57.png

Link to comment
Share on other sites
spakk
spakk
Posted
Posted

it is useless to remove AppleGraphicsControl.kext, AppleTyMCEDriver.kext and AppleUpstreamUserClient.kext  ;)

I have just tested to boot with these drivers. the system reminds me of my first 386-he personal computer. I need to remove these drivers otherwise is OS X unusable, the graphics and the CPU performance are extremely lazy ! ^_^

Link to comment
Share on other sites
alllp
alllp
Posted
Posted

well appaerantly the same hardware works better under windows 10, I guess when the hardware is not very compatible with OS X, it works slower than windows, how do you think?

 

Here is the results; 

 

OS X YOSEMITE 10.10.5

 

unnamed.png

 

 

 

WINDOWS 10

 

Screenshot_7.png

Link to comment
Share on other sites
gils83
gils83
Posted
Posted (edited)

I have just tested to boot with these drivers. the system reminds me of my first 386-he personal computer. I need to remove these drivers otherwise is OS X unusable, the graphics and the CPU performance are extremely lazy ! ^_^

 

??  :worried_anim:

 

i tested :)

well appaerantly the same hardware works better under windows 10, I guess when the hardware is not very compatible with OS X, it works slower than windows, how do you think?

 

Here is the results; 

 

OS X YOSEMITE 10.10.5

 

unnamed.png

 

 

 

WINDOWS 10

 

Screenshot_7.png

 

wooh !!??  :shock:

 

 

use voodopstate ? 

 

look in Console and write freq :)

post-1093405-0-60654900-1443718729_thumb.png

post-1093405-0-16751100-1443719426_thumb.png

Edited by gils83
Link to comment
Share on other sites
lacikau
lacikau
Posted
Posted

Hello!

 

I spent the last three days with installing, googling, but I can't deal with this any more. I need some help.

 

My build:

- AMD FX-8350

- KINGSTON 2x8GB

- GA-990FXA-UD5

- SAPPHIRE RADEON HD 7950 3GB

- SAMSUNG SSD 840 Series

 

I successfully installed Hackintosh on my PC (downloaded from AppStore)

OSX version: Yosemite 10.10.5

Boot loader: Chimera

Kernel: http://www.insanelymac.com/forum/files/file/461-amd-kernel-yosemite-10105-sseplus/

 

- installed this because the spinning wheel of death: http://www.insanelymac.com/forum/files/file/354-amd-replace-kext-for-yosemite/

- patched AMDRadeonX4000 cail_properties

- patched AMD7000Controller - Futomaki framebuffer, this method: http://www.insanelymac.com/forum/topic/303186-how-to-modification-of-amd-fb-clover-injection/- binary patch instead of clover - didn't help... same as before...

- installed ACL889 audio: http://www.insanelymac.com/forum/files/file/176-experimental-6-channel-applehda-for-alc889/with HDAEnabler

- installed RTL8111 ethernet: https://github.com/Mieze/RTL8111_driver_for_OS_X

- installed USB3.0: http://www.insanelymac.com/forum/files/file/150-patched-appleusbxhci/

- installed FakeSMC

- enabled TRIM

 

My system is up and running, BUT only two of my three monitors are working. I spent the last 3 days debugging this issue, but I couldn't find a solution for that. The system recognises all three, but one of them (random) is black all the time (not blinking, black). I know there is a sleep/wake fix for that, but If I sleep my system, can't wake it again. More specifically it wakes up, but no usb, no ethernet, only the three frozen desktop. It hangs. I have to hard-reset all the time.

 

Could somebody please help me? I don't know how to fix the sleep/wake issue, but now my system is pretty much useless without the third monitor and/or the sleep.

 

Thank you!

  • Like 1
Link to comment
Share on other sites
lacikau
lacikau
Posted
Posted

 

 

 

Screenshots: http://imgur.com/a/HxVWw

 

ioreg:

Admins-Mac-Pro:~ admin$ ioreg | grep ATY
    | |   |   | +-o ATY,AMD,RadeonFramebuffer@0  <class AtiFbStub, id 0x10000036c, registered, matched, active, busy 0 (242 ms), retain 8>
    | |   |   | +-o ATY,AMD,RadeonFramebuffer@1  <class AtiFbStub, id 0x10000036d, registered, matched, active, busy 0 (1 ms), retain 8>
    | |   |   | +-o ATY,AMD,RadeonFramebuffer@2  <class AtiFbStub, id 0x10000036e, registered, matched, active, busy 0 (1 ms), retain 8>
    | |   |   | +-o ATY,AMD,RadeonFramebuffer@3  <class AtiFbStub, id 0x10000036f, registered, matched, active, busy 0 (0 ms), retain 8>

kernel flags:

PCIRootUID=1 npci=0x3000 -v kext-dev-mode=1 GraphicsEnabler=Yes AtiConfig=Futomaki AtiPorts=4
Link to comment
Share on other sites
Mr. Xtreme
Mr. Xtreme
Posted
Posted

Sorry to be off topic but...  I was wondering if you could still download yosemite as I have a mavericks install drive and I want to install mavericks and upgrade to Yosemite any ideas?

Link to comment
Share on other sites
spakk
spakk
Posted
Posted

Sorry to be off topic but...  I was wondering if you could still download yosemite as I have a mavericks install drive and I want to install mavericks and upgrade to Yosemite any ideas?

An upgrade can may work, but can may also lead to starting problems, therefore it is advisable to make a Clean Install of Yosemite on a free partition or on a second HDD.

  • Like 1
Link to comment
Share on other sites
Mr. Xtreme
Mr. Xtreme
Posted
Posted

OK so I used this kernel for 10.10.3 and I got KPs so I replaced IOKit.framework, Kernel.framework, System.framework, and system.kext and I got stopped at something about display service running 0 seconds http://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page-75?do=findComment&comment=2165020

Link to comment
Share on other sites
spakk
spakk
Posted
Posted

OK so I used this kernel for 10.10.3 and I got KPs so I replaced IOKit.framework, Kernel.framework, System.framework, and system.kext and I got stopped at something about display service running 0 seconds http://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page-75?do=findComment&comment=2165020

No! the changes that you have done is not correct! doing everything back in the original condition, and use only the amd kernel from package, then boot again and then post the kernel panic here.

Link to comment
Share on other sites
Mr. Xtreme
Mr. Xtreme
Posted
Posted

OK removed all that stuff and it didn't KP, instead it gets stuck at

Wed Oct  7 localhost com.apple.xpclaunchd[1] (com.apple.configd) <Notice>: Service only ran for 1 seconds. Pushing respawn by 9 seconds

P.S thanks for telling me to post any KPs first, then try the stuff and thanks for your help in advance :) .

Link to comment
Share on other sites
Mr. Xtreme
Mr. Xtreme
Posted
Posted

OK update so I got the installer to boot but the installation failed here is a installer log https://onedrive.live.com/prev?cid=995462bea850c8cc&id=995462BEA850C8CC%2146255&authkey=%21AF0sP3gQWQraeMo&v=TextFileEditor

Link to comment
Share on other sites
Shaneee
Shaneee
Posted
Posted

OK update so I got the installer to boot but the installation failed here is a installer log https://onedrive.live.com/prev?cid=995462bea850c8cc&id=995462BEA850C8CC%2146255&authkey=%21AF0sP3gQWQraeMo&v=TextFileEditor

 

Use this kernel as its the latest one, http://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page-84?p=2169025&do=findComment&comment=2169025

 

If your installation still fails then I think you will need to remake the installer as it may be corrupt. Only replace the kernel and add the kexts needed to make your system boot eg chipset kext.

Link to comment
Share on other sites
Mr. Xtreme
Mr. Xtreme
Posted
Posted

I got it working see here http://www.insanelymac.com/forum/topic/285110-amd-working-builds/page-13?do=findComment&comment=2175136 :D

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...