spakk Posted November 25, 2014 Share Posted November 25, 2014 Hi guys! I have problem with my graphics geforce 9800 GT. This card works without issues in previous os x mavericks, in yosemite only artifacts when I use flag GraphicsEnabler=yes and even black screen without this flag. Processor AMD Athlon 64 x2 Sorry for my English =) with -x black screen too Which kernel are you using? booting you with a DSDT.aml? which bootloader you use? please more details and please edit your hardware specifications in your signature, so we can help you better. Link to comment Share on other sites More sharing options...
unive Posted November 26, 2014 Share Posted November 26, 2014 Which kernel are you using? booting you with a DSDT.aml? which bootloader you use? please more details and please edit your hardware specifications in your signature, so we can help you better Kernel 10.10 rc2 v2, boot without DSDT, bootloader Chameleon r2401 I installed it with r-drive from image from torrent Link to comment Share on other sites More sharing options...
spakk Posted November 26, 2014 Share Posted November 26, 2014 Make fresh usb install and try with kernel BSA_10.10_rc1 1 Link to comment Share on other sites More sharing options...
unive Posted November 27, 2014 Share Posted November 27, 2014 And if you end up with a white screen on your GeForce 9800GT, use axmanA's modified IOPC IFamily kextand boot with option msibase=0x90. I take black screen in instalation. after I replaced IOPCIFamily kext there was kernel panic( Link to comment Share on other sites More sharing options...
spakk Posted November 27, 2014 Share Posted November 27, 2014 make a picture from the kernel panic and upload it here, a picture says more than a thousand words... Link to comment Share on other sites More sharing options...
unive Posted November 27, 2014 Share Posted November 27, 2014 make a picture from the kernel panic and upload it here, a picture says more than a thousand words... Link to comment Share on other sites More sharing options...
spakk Posted November 27, 2014 Share Posted November 27, 2014 @unive install NullpowerManagement.kext and FakeSMC.kext into S/L/Extensions and remove the AppleIntelCPUPowermanagement.kext from S /L/Extensions.then fix the permissions with kext wizard ! then boot with: kext-dev-mode=1 npci=0x3000 -v Link to comment Share on other sites More sharing options...
unive Posted November 28, 2014 Share Posted November 28, 2014 nullpower and fakesmc are already there in folder extra. and I booted with those parameters tried again with deleted AppleIntelCPUPowermanagement.kext Link to comment Share on other sites More sharing options...
Bronya Posted November 28, 2014 Share Posted November 28, 2014 Hi unive ! What's Your system ???? 1 Link to comment Share on other sites More sharing options...
spakk Posted November 28, 2014 Share Posted November 28, 2014 @unive if you have installed the drivers into /Extra/, then you need to boot with this flag: kext-dev-mode=1 npci=0x3000 UseKernelCache=no -v -f I think Bronya has detected a another possibility fault , therefore, answer the question of Bronya --->maybe you used the wrong kernel that is not compatible with your CPU --> a possible kernel will work with your CPU is BSA_10.10_rc1 Link to comment Share on other sites More sharing options...
unive Posted November 28, 2014 Share Posted November 28, 2014 Hi unive ! What's Your system ???? cpu: AMD Athlon 64 X2 RAM: 2 GB 1333 MHz Mobo: MSI K9N2GM-FD Video Card: Nvidia Geforce 9800 GT your kenel works, it boot os on my system but dont work video and I dont know how to make it work.after boot it shows only this .It happen with every kernel on hackintoshosx.com (rc1 and rc2).On previous systems(10.7 10.8 10.9) everything were good with your kernels. help please =) Link to comment Share on other sites More sharing options...
Bronya Posted November 28, 2014 Share Posted November 28, 2014 cpu: AMD Athlon 64 X2 RAM: 2 GB 1333 MHz Mobo: MSI K9N2GM-FD Video Card: Nvidia Geforce 9800 GT your kenel works, it boot os on my system but dont work video and I dont know how to make it work.after boot it shows only this nDJRSLm6hx4.jpg.It happen with every kernel on hackintoshosx.com (rc1 and rc2).On previous systems(10.7 10.8 10.9) everything were good with your kernels. help please =) If problem graphic - this videocard or you can add other dev_id in clover and try ! nullpower and fakesmc are already there in folder extra. and I booted with those parameters tried again with deleted AppleIntelCPUPowermanagement.kext This what's system ? 10.10 or 10.10.1 ? Link to comment Share on other sites More sharing options...
unive Posted November 28, 2014 Share Posted November 28, 2014 If problem graphic - this videocard or you can add other dev_id in clover and try ! This what's system ? 10.10 or 10.10.1 ? system 10.10.1 Link to comment Share on other sites More sharing options...
Bronya Posted November 28, 2014 Share Posted November 28, 2014 system 10.10.1 You should copy System.kext from 10.10 and try ... If don't work , all kexts from 10.10 =) 2 Link to comment Share on other sites More sharing options...
maliigno Posted November 29, 2014 Share Posted November 29, 2014 that kernel supports gigabyte r7 250 oc editon 2GB, he said that I installed yosemite with the first kernel sack Bronya and I did not work the gpu I have acceleration graph in the distro Niresh 10.9 if I work the gpu without installing any kext only putting the smbios mac pro 5.1 pd sorry for my English, I'm Spanish and I use the google translator Link to comment Share on other sites More sharing options...
spakk Posted November 30, 2014 Share Posted November 30, 2014 that kernel supports gigabyte r7 250 oc editon 2GB, he said that I installed yosemite with the first kernel sack Bronya and I did not work the gpu I have acceleration graph in the distro Niresh 10.9 if I work the gpu without installing any kext only putting the smbios mac pro 5.1 pd sorry for my English, I'm Spanish and I use the google translator sory but we do not provide support for distros. Link to comment Share on other sites More sharing options...
unive Posted November 30, 2014 Share Posted November 30, 2014 You should copy System.kext from 10.10 and try ... If don't work , all kexts from 10.10 =) No changes( bootloader chameleon r2401 Link to comment Share on other sites More sharing options...
tatomi92 Posted December 3, 2014 Share Posted December 3, 2014 Hi guys! Is there anyone here who had successfully got to work a Sapphire 7850 2GB OC video card on Yosemite? My CPU is an AMD Phenom x4 930 and I've got an fully working Mavericks 10.9.5 on this system with GraphicsEnabler=Yes, but every time I try to install Yosemite on it, I get these errors: "Memory allocation error: Addr: 0x0, Szie 0x3ff1970, File: ati.c, Line 1557. This is a non recoverable error! System HALTED!!!" with GraphicsEnaber=Yes or black screen and then system restart with GraphicsEnaber=No Link to comment Share on other sites More sharing options...
Dmitry R Posted December 10, 2014 Share Posted December 10, 2014 Hi guys, Has anybody tried amd kernel with Opteron 6128? I have it running ESXi 5.1 There are no problems with either 10.8 or 10.9. Everything works fine being booted with Clover. However, with 10.10 and any of the kernel listed here I can't go any further then black screen with this on top: efiboot loaded from device: Acpi(PNP0A03,0)/Pci(10|0)/Scsi(Pun1,Lun0)HD(Part2,S igC1202997-F165-55F3-89FC-D62213046AFF) boot file path: System\Library\CoreServices\boot.efi ............................... root device uuid is '8BDA2444-8A46-339B-8D6D-BDCA75A3D7F6' ****************************************************** Any help would be very much appreciated, Dmitry Link to comment Share on other sites More sharing options...
ameris_cyning Posted December 10, 2014 Share Posted December 10, 2014 Hi guys, Has anybody tried amd kernel with Opteron 6128? I have it running ESXi 5.1 There are no problems with either 10.8 or 10.9. Everything works fine being booted with Clover. However, with 10.10 and any of the kernel listed here I can't go any further then black screen with this on top: efiboot loaded from device: Acpi(PNP0A03,0)/Pci(10|0)/Scsi(Pun1,Lun0)HD(Part2,S igC1202997-F165-55F3-89FC-D62213046AFF) boot file path: System\Library\CoreServices\boot.efi ............................... root device uuid is '8BDA2444-8A46-339B-8D6D-BDCA75A3D7F6' ****************************************************** Any help would be very much appreciated, Dmitry Which kernel are you using? Link to comment Share on other sites More sharing options...
Dmitry R Posted December 10, 2014 Share Posted December 10, 2014 Which kernel are you using? All from here http://wiki.osx86pro...Patched_Kernels Link to comment Share on other sites More sharing options...
ameris_cyning Posted December 10, 2014 Share Posted December 10, 2014 All from here http://wiki.osx86pro...Patched_Kernels Are you booting with Kernel Caches or without? Link to comment Share on other sites More sharing options...
Dmitry R Posted December 10, 2014 Share Posted December 10, 2014 Are you booting with Kernel Caches or without? I'm using -v -f , but it seems to me, booting is not getting to the point where cache is used. Link to comment Share on other sites More sharing options...
ameris_cyning Posted December 10, 2014 Share Posted December 10, 2014 I'm using -v -f , but it seems to me, booting is not getting to the point where cache is used. -f doesnt work with clover Use NoCaches instead 1 Link to comment Share on other sites More sharing options...
spakk Posted December 10, 2014 Share Posted December 10, 2014 at Clover "WithKexts", "NoCaches" and "-v" Link to comment Share on other sites More sharing options...
Recommended Posts