spakk Posted April 21, 2014 Share Posted April 21, 2014 I do not understand the problems you have. I have installed Regardless of the beta version (10.9.3 with last beta 13D43) on my system, its works very well ... regardless which kernel I use. You must properly configure your system then is then also will run well. Link to comment Share on other sites More sharing options...
fishhelmet Posted April 21, 2014 Share Posted April 21, 2014 I do not understand the problems you have. I have installed Regardless of the beta version (10.9.3 with last beta 13D43) on my system, its works very well ... regardless which kernel I use. You must properly configure your system then is then also will run well. Alright so it's probably me screwing up something here again. Is there any chance you could tell me what kexts you replace when doing the upgrade? and whether I should directly use the 10.9.2 combo update or upgrade to 10.9.1 first? Link to comment Share on other sites More sharing options...
spakk Posted April 21, 2014 Share Posted April 21, 2014 Alright so it's probably me screwing up something here again. Is there any chance you could tell me what kexts you replace when doing the upgrade? and whether I should directly use the 10.9.2 combo update or upgrade to 10.9.1 first? Hi fishhelmet The problem has been here a hundred times described how to fix that. it is a pity that you did not read the threads here. it does not matter which update version you install. you always have to replace (rollback) System.kext and Sandbox.kext from mavericks 10.9.0 !! Then repair the permissions and renew cache, then the best boot with: -v -f npci=0x ....... etc..... 1 Link to comment Share on other sites More sharing options...
fishhelmet Posted April 21, 2014 Share Posted April 21, 2014 Hi fishhelmet The problem has been here a hundred times described how to fix that. it is a pity that you did not read the threads here. it does not matter which update version you install. you always have to replace (rollback) System.kext and Sandbox.kext from mavericks 10.9.0 !! Then repair the permissions and renew cache, then the best boot with: -v -f npci=0x ....... etc..... Thank you spakk, sorry I didn't think to check the prerelease testing thread. My bad. Link to comment Share on other sites More sharing options...
jsl Posted May 14, 2014 Share Posted May 14, 2014 CPU AMD Athlon(速龙) II X2 240 双核 BIOS 技嘉 GA-MA785GM-US2H（DSDT sleep） RAM 5120 MB ( 金士顿 DDR2 800MHz ) SATA 西数 WDC WD5000AAKS-00N7B0 ( 500 GB / 7200 转/分 ) GPU Nvidia GeForce 210 ( 128 MB ) 声卡 瑞昱 ALC885 @ ATI IXP SB600/SB700/SB800 高保真音频（万能） 网卡 瑞昱 RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC / 技嘉 屏幕快照 2014-05-10 上午8.17.24.png 10.9.3 13D61 new up!!! Hi, can you tell us which AMD kernel is working in your build ? Any guide for update from 10.9.1 to 10.9.2 or 10.9.3 ? 1 Link to comment Share on other sites More sharing options...
spakk Posted May 14, 2014 Share Posted May 14, 2014 Hi, can you tell us which AMD kernel is working in your build ? Any guide for update from 10.9.1 to 10.9.2 or 10.9.3 ? wait and see the developments of the new amd_kernel, possibly this can be start with your system.Otherwise, you can use any other amd_kernel. 2 Link to comment Share on other sites More sharing options...
xW4LK3R Posted May 21, 2014 Share Posted May 21, 2014 CPU: AMD Athlon II X2 250 3.o Ghz Motherboard: ECS A780LM-M2 RAM: 8GB DDR3 1333Mhz SATA: 2X 500GB, DVD-R PATA: 40GB (Windows 8) USB 2.0: All 4 rear and 2 front ports work. GPU: AMD Radeon HD 5450, works with kext plist edits and GE=Yes (also GE=No thanks to a DSDT edit, but reports as a HD5000) LAN: Realtek RTL8111E, Realtek RTL8195E (onboard, not working) Sound: Realtek VIA VT1705, latest voodoo working. HDMI audio not working Bootloader: Chameleon 2.2 r2170 Mountain Lion 10.8.2, bootflags: amd_kernel, arch=x86_64, npci=0x2000, GraphicsEnabler=Y (latest Anv amd_kernel for 10.8.x) System works fine, litlle to no graphics corruption (only Safari, heavily affected, and Chrome, almost never affected). Games, movies, animations and graphics benchmarks perform as expected from the card. Until now, only DVD Player (crashes upon launch), ArchiveUtility (becomes unusable a couple of hours after startup) and the zoom shortcut (have to reenable it in Accessibility PrefPane from time to time) don't work as they should. Geekbench score: 4400 + Lion 10.7.5, boot flags: bronya_kernel, arch=i386, -nossse3bit, npci=0x2000, GraphicsEnabler=Y (Bronzovka's 10.7.5 RC7 kernel) System works almost flawlessly, with full support for 64-bit applications and impecable graphics performance. Only HDMI audio doesn't work. Geekbench score: 4400 + Hello theconnactic, where i can find this kernel that you used? 1 Link to comment Share on other sites More sharing options...
theconnactic Posted May 22, 2014 Share Posted May 22, 2014 You can find the latest version here: http://www.insanelymac.com/forum/files/file/65-amd-kernel/ All the best! Link to comment Share on other sites More sharing options...
sebastiantrrr Posted June 3, 2014 Share Posted June 3, 2014 I got an AMD system and I want to back Hackintosh again. FX8320 MSI 970A-G46 (audio Realtek ALC892, network Realtek 8111E) GTX660 I used Niresh 10.9.0 I installed but it's couldn't boot I try a lot of code and it's start but doesn't recognized my sound card, network, even graphics card basically recognize nothing. But I chose kext on install secren. Does any has same hardware? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted June 5, 2014 Share Posted June 5, 2014 lol to me only i use latest bronya kernel with 10.9.3 installer it goes to installation and install fine but when booting to the setuped os x after loading i stuck with white screen with mouse courser don't know why this occur only with 10.9.2 and 10.9.3 but i can install and run 10.9.0 normally with latest kernel i am using UEFI clover rev 2695 Link to comment Share on other sites More sharing options...
dimitar1 Posted June 5, 2014 Share Posted June 5, 2014 lol to me only i use latest bronya kernel with 10.9.3 installer it goes to installation and install fine but when booting to the setuped os x after loading i stuck with white screen with mouse courser don't know why this occur only with 10.9.2 and 10.9.3 but i can install and run 10.9.0 normally with latest kernel i am using UEFI clover rev 2695 80% sure that this white screen is not caused by the kernel. Are you talking about the combo update. Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted June 5, 2014 Share Posted June 5, 2014 80% sure that this white screen is not caused by the kernel. Are you talking about the combo update. i installed 10.9.0 and works fine then install combo update from app store result after restart white screen with mouse courser ---- install from start 10.9.3 after installing it successfully and then booting it also white screen with mouse courser i think it is related to mine problem of hanging with OS X unless moving the mouse :/ Link to comment Share on other sites More sharing options...
(AMD)ConanHUN Posted June 8, 2014 Share Posted June 8, 2014 lol to me only i use latest bronya kernel with 10.9.3 installer it goes to installation and install fine but when booting to the setuped os x after loading i stuck with white screen with mouse courser don't know why this occur only with 10.9.2 and 10.9.3 but i can install and run 10.9.0 normally with latest kernel i am using UEFI clover rev 2695 same here 10.9 and 10.9.1 works fine but I never reach the desktop after 10.9.2 but you can reach it in safe mode (-x) no solution find yet but I think the new graphic kexts do this or something wrong in Niresh's distro Link to comment Share on other sites More sharing options...
carlo_67 Posted June 9, 2014 Share Posted June 9, 2014 Hey people, these questions do not belong here! Note the basic rules that are disregarded for a long time. unfortunately, also by me. Basically, these questions belong in the appropriate help pages and for decency's sake, as in every forum, all hardware-specific information belongs entered in the signature!!!!, so everyone can help. @zeroing repair permissions using disk utility with usb Pandora istaller then reboot with flag -v -f UseKernelCache=No AtiConfig=Chutoro 1 Link to comment Share on other sites More sharing options...
(AMD)ConanHUN Posted June 10, 2014 Share Posted June 10, 2014 @zeroing repair permissions using disk utility with usb Pandora istaller then reboot with flag -v -f UseKernelCache=No AtiConfig=Chutoro doesn't helped for me white/grey screen and a spinning cursor any idea how can I debug this problem? Link to comment Share on other sites More sharing options...
Duran Keeley Posted June 10, 2014 Share Posted June 10, 2014 doesn't helped for me white/grey screen and a spinning cursor any idea how can I debug this problem? Have you tried the old fixes for White Screen problems? fbrotate or what I've found is even a different AtiConfig works. Boot into safemode (-x) rename the AMD5000Controller.kext to like AMD5000Controller.kext.disable. Boot with UseKernelCache=No -f. Refer here http://www.insanelymac.com/forum/topic/287626-guide-bypass-the-white-screen-for-ati-hd-7xxx-1083/ Link to comment Share on other sites More sharing options...
icemank121 Posted June 11, 2014 Share Posted June 11, 2014 I had the grey screen and spinning cursor also, the only thing that will fix it for me on 10.9.3 and 10.9.2 was to rollback IOPCIFamily.kext and AppleACPIPlatform.kext to 10.9.0. Link to comment Share on other sites More sharing options...
Duran Keeley Posted June 12, 2014 Share Posted June 12, 2014 Can someone test if the White screen happens in clover?? Testing something at the moment and I get the same white screen on my Intel with the new chameleon in Yosemite but doesn't happen with clover... Link to comment Share on other sites More sharing options...
theconnactic Posted June 12, 2014 Share Posted June 12, 2014 Will do later with my Clover USB stick. P.S.: welcome back! P.S.: in my case, I have no white screen, but I'll test it anyway to see if Clover's as stable as Chameleon with my build. 1 Link to comment Share on other sites More sharing options...
Duran Keeley Posted June 12, 2014 Share Posted June 12, 2014 Will do later with my Clover USB stick. P.S.: welcome back! P.S.: in my case, I have no white screen, but I'll test it anyway to see if Clover's as stable as Chameleon with my build. Awesome thank you also might need those with white screens to revert to an older version of Chameleon for testing as well. PS: Thank you Great to be back and wow did I miss a lot! Playing catch up while being off from work. Hope all is good. Link to comment Share on other sites More sharing options...
Saerith Posted June 17, 2014 Share Posted June 17, 2014 sebastiantrrr Have you tried using ##### and/or specific Kexts for your hardware? Edit: Oops, need to read that... Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted June 21, 2014 Share Posted June 21, 2014 so can who have 10.9.3 working without any problem share their fakesmc & smbios ? Link to comment Share on other sites More sharing options...
zerking Posted June 22, 2014 Share Posted June 22, 2014 No solution yet! Tried different methods, still stuck on white screen spinning wheel... Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted June 22, 2014 Share Posted June 22, 2014 while reading signature of users having white screen nearly almost all of them having motherboard using AMD 970 Chipset !! Link to comment Share on other sites More sharing options...
zerking Posted June 23, 2014 Share Posted June 23, 2014 Does it really have something to do with chipset or it's a graphic card problem??? Link to comment Share on other sites More sharing options...
Recommended Posts