YaPaY Posted April 5, 2013 Share Posted April 5, 2013 What is the easiest method the patch dsdt.aml to work 5450 without work ge no. Everything works but second display doesn't work, detecting from os but only blank screen. In Internet there are many tutorial but a bit complicated for me. Any help would be appreciated Link to comment Share on other sites More sharing options...
theconnactic Posted April 5, 2013 Share Posted April 5, 2013 YaPay, ask help with DSDT Edits for your graphics here: http://www.insanelymac.com/forum/forum/344-graphics-cards/ and here: http://www.insanelymac.com/forum/forum/174-ati/. Good luck and all the best! Link to comment Share on other sites More sharing options...
sabag123 Posted April 5, 2013 Share Posted April 5, 2013 hey , i tried to install mac os x mountain lion and i can't get to installation i used mac appstore os x mouantion lion + ##### specs: amd phenom ii 955 hd 6950 i tried bootflags -x -v -s GraphicsEnabler=yes/no npci=0x3000/2000 arch=x86_64 and more that i can't remember on verbose mode i'm getting the error :pci configuration begin pfm64 (44 cpu) ACHI enabled. what's the problem? and i can't unplug my graphic card because my motherboard doesn't have graphic on board Link to comment Share on other sites More sharing options...
theconnactic Posted April 5, 2013 Share Posted April 5, 2013 Try also PCIRootUID=0 or PCIRootUID=1, if the first doesn't work. Post a pic of the error. Best regards. Link to comment Share on other sites More sharing options...
sabag123 Posted April 5, 2013 Share Posted April 5, 2013 same error. Link to comment Share on other sites More sharing options...
Shaneee Posted April 5, 2013 Share Posted April 5, 2013 same error. As theconnactic said... Post a pic of the error. Link to comment Share on other sites More sharing options...
sabag123 Posted April 5, 2013 Share Posted April 5, 2013 tried with both PCIROOTUID sorry for the picture Link to comment Share on other sites More sharing options...
itzvizionzx Posted April 5, 2013 Share Posted April 5, 2013 No: you should add the device ID - 0x68F91002 if you bought the right one - to the Info.plist of two kexts, ATI5000Controler.kext and AMDRadeonAcellerator.kext (in this one under the AMDCedarRadeonAccelerator key). Then boot with all the same flags plus -f Good luck. http://postimg.org/image/5upbojs59/ Think it was same as yours not sure if because it branded asus made any difference but just had bad luck lol, going to try a few things like deleting all graphics kexts but if not maybe return looks like amd dosent want to meet mountain lion on my PC aha. Link to comment Share on other sites More sharing options...
theconnactic Posted April 5, 2013 Share Posted April 5, 2013 Don't delete nothing: just edit those two like i said. Link to comment Share on other sites More sharing options...
itzvizionzx Posted April 5, 2013 Share Posted April 5, 2013 Tried twice unfortanatly nothing but about to try again it fails - (well screen goes black but i can hear it booting) just as the extensions are loading but about to reattempt hopefully i made error but doubt and sorry forgot to tell you i ted it lol. Very weird though that booting on the usb to install needed no flags Link to comment Share on other sites More sharing options...
theconnactic Posted April 5, 2013 Share Posted April 5, 2013 Boot with GraphicsEnabler=No and the two edited kexts and repair permissions, then boot with GE=yes. Link to comment Share on other sites More sharing options...
ptp Posted April 5, 2013 Share Posted April 5, 2013 ok , so finally i got mountain lion 10.8.3 up and running whit full qe/ci, i have translucid bar , i can watch hd videos, can play chess etc. all that working fine, but the problem is that i have a lot of artifcacts in all of the web browsers. ¿ is this a problem of the amd kernel or i have to edit something in the kexts? Here's a screenshot: http://postimg.org/image/wy4u0g0wd/ Link to comment Share on other sites More sharing options...
theconnactic Posted April 5, 2013 Share Posted April 5, 2013 The problem is in the kernel: you can partially or fully solve it disabling hardware acceleration/composite drawing/canvas drawing in the preferences menu of each browser. All the best! http://www.insanelymac.com/forum/topic/287453-how-to-enable-safari-with-107-64-bit-or-108-on-amd-machines/ Link to comment Share on other sites More sharing options...
ptp Posted April 5, 2013 Share Posted April 5, 2013 The problem is in the kernel: you can partially or fully solve it disabling hardware acceleration/composite drawing/canvas drawing in the preferences menu of each browser. All the best! http://www.insanelym...n-amd-machines/ thanks , i'm gonna try out. ¿ This also happens in Lion? Link to comment Share on other sites More sharing options...
sabag123 Posted April 5, 2013 Share Posted April 5, 2013 what about my problem ? Link to comment Share on other sites More sharing options...
ptp Posted April 5, 2013 Share Posted April 5, 2013 what about my problem ? Try to boot whit -f PCIRootUID=0 npci=0x2000 GraphicsEnabler=No 1 Link to comment Share on other sites More sharing options...
itzvizionzx Posted April 5, 2013 Share Posted April 5, 2013 Just checked both info.plist files and they were good and very wierd even with GraphicsEnabler=No it didnt work black screen just after loading extensions so im going to try another kernel and if not retire from amd mac, thankfully have a intel laptop with everything working. so 1 pc for win 1 for mac Sure ill crack it in end though, thanks for all your assistance, ill report back tomorow how i got it to work if i manage Link to comment Share on other sites More sharing options...
Shaneee Posted April 5, 2013 Share Posted April 5, 2013 what about my problem ? npci=0x3000 GraphicsEnabler=No -x -f -v Should do the trick to get you to the installer. Link to comment Share on other sites More sharing options...
sabag123 Posted April 5, 2013 Share Posted April 5, 2013 npci=0x3000 GraphicsEnabler=No -x -f -v Should do the trick to get you to the installer. i tried to boot with npci=0x2000 before and it resets my bios it can happen again with 0x3000? Link to comment Share on other sites More sharing options...
Shaneee Posted April 5, 2013 Share Posted April 5, 2013 i tried to boot with npci=0x2000 before and it resets my bios it can happen again? Do you mean it reset your BIOS settings? If you still get the same error make the installer using myHack or the Pandora app made by the staff here and place the kernel on your USB drive. Link to comment Share on other sites More sharing options...
sabag123 Posted April 5, 2013 Share Posted April 5, 2013 Do you mean it reset your BIOS settings? If you still get the same error make the installer using myHack or the Pandora app made by the staff here and place the kernel on your USB drive. i mean when i'm booting with npci=0x2000 it resets my CMOS i want to know if it will resets with npci=0x3000 Link to comment Share on other sites More sharing options...
Shaneee Posted April 5, 2013 Share Posted April 5, 2013 i mean when i'm booting with npci=0x2000 it resets my CMOS i want to know if it will resets with npci=0x3000 It may do yes but once you have it installed you can stop it from happening again. Link to comment Share on other sites More sharing options...
sabag123 Posted April 5, 2013 Share Posted April 5, 2013 two errors Link to comment Share on other sites More sharing options...
Shaneee Posted April 5, 2013 Share Posted April 5, 2013 It may take a while for the GUI to appear. Alot of patience is needed with AMD Hackintosh. Link to comment Share on other sites More sharing options...
sabag123 Posted April 5, 2013 Share Posted April 5, 2013 It may take a while for the GUI to appear. Alot of patience is needed with AMD Hackintosh. but after the error it just reboots my system. Link to comment Share on other sites More sharing options...
Recommended Posts