Andy Vandijck Posted January 11, 2013 Share Posted January 11, 2013 Explanation here: http://netkas.org Link to comment Share on other sites More sharing options...
Bitcore Posted January 11, 2013 Share Posted January 11, 2013 The lines before my system reboots: http://img210.imageshack.us/img210/4258/errorhs.png Whyyyyyy... Anyone who knows what to do about it? Bitcore Link to comment Share on other sites More sharing options...
iFIRE Posted January 11, 2013 Share Posted January 11, 2013 bad SMBIOS Link to comment Share on other sites More sharing options...
Bitcore Posted January 11, 2013 Share Posted January 11, 2013 bad SMBIOS actually none SMBIOS Link to comment Share on other sites More sharing options...
iFIRE Posted January 11, 2013 Share Posted January 11, 2013 jejejejeje!!!!! and like you want boot your system!!!!! if you not have a SMBIOS , post your Extra folder, and please put your hardware in your signature for support Link to comment Share on other sites More sharing options...
theconnactic Posted January 11, 2013 Share Posted January 11, 2013 Bitcore, which kernel are you using? You have to use the name of the kernel as a boot flag, did you do it? I.e.: if you're using AnV's latest kernel, you'll have to use the boot flag amd_kernel before typing arch=x86_64 and the other boot flags. Best regards! P.S.: and edit your signature so it has your exact specs, like iFire said. Link to comment Share on other sites More sharing options...
Bitcore Posted January 11, 2013 Share Posted January 11, 2013 Bitcore, which kernel are you using? You have to use the name of the kernel as a boot flag, did you do it? I.e.: if you're using AnV's latest kernel, you'll have to use the boot flag amd_kernel before typing arch=x86_64 and the other boot flags. Best regards! P.S.: and edit your signature so it has your exact specs, like iFire said. I always boot with amd_kernel as flag. i do not have a mach_kernel on it so if i boot without amd_kernel it just says "cant find mach_kernel" Link to comment Share on other sites More sharing options...
theconnactic Posted January 11, 2013 Share Posted January 11, 2013 Post please your complete specs. This instant reboot issue should have been obliterated from AMD machines. Link to comment Share on other sites More sharing options...
byransays Posted January 11, 2013 Share Posted January 11, 2013 Hey! back on Lion, trying to get 64-bit with Itz shanes latest build. First boot I had a KP on AppleRTC, so I disabled it, now after a -f boot I got a KP on AppleOnboardPCATA...however when I look in my Extensions folder, there is no such kext? Alright pictures. This one is normal boot. (with -f) This is with safe mode(and -f) It seems im stuck on FakeSMC and this AppleOnboardPCATA(which sometimes is AppleOnboardPCATARoot) Ive tried a newer FakeSMC to no avail...and like I said I can not find an AppleOnboardPCATA kext, nor a plugin in kexts like AppleACPIFamily and such. Any ideas? Link to comment Share on other sites More sharing options...
theconnactic Posted January 11, 2013 Share Posted January 11, 2013 See if it's inside FakeSMC. Link to comment Share on other sites More sharing options...
byransays Posted January 11, 2013 Share Posted January 11, 2013 See if it's inside FakeSMC. I have no plugins inside FakeSMC, Thanks for the answer though! Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 11, 2013 Share Posted January 11, 2013 I have no plugins inside FakeSMC, Thanks for the answer though! IOATAFamily.kext/Contents/PlugIns maybe... Link to comment Share on other sites More sharing options...
mac_carol Posted January 11, 2013 Share Posted January 11, 2013 @byransays [s]sudo find /System/Library/Extensions -type F -name AppleOnboardPCATA*[/s] [s]sudo find /Extra/Extensions -type F -name AppleOnboardPCATA*[/s] EDIT: it's f (lower-case) and add /Volumes/osx_hdd_name/ before the full path (/S/L/E & /E/E) sudo find /Volumes/osx_hdd_name/System/Library/Extensions -type f -name AppleOnboardPCATA* sudo find /Volumes/osx_hdd_name/Extra/Extensions -type f -name AppleOnboardPCATA* note: filename is case-sensitive Link to comment Share on other sites More sharing options...
byransays Posted January 11, 2013 Share Posted January 11, 2013 @byransays sudo find /System/Library/Extensions -type F -name AppleOnboardPCATA* sudo find /Extra/Extensions -type F -name AppleOnboardPCATA* note: filename is case-sensitive Checking now, thanks @Mac_carol I get an output of "find: -type: F: unknown type IOATAFamily.kext/Contents/PlugIns maybe... I also checked there, none found. I found you made a SL AppleATIATA kext for 64-bit, would that be something I would need with my ATI chipset? Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 11, 2013 Share Posted January 11, 2013 Checking now, thanks! I also checked there, none found. I found you made a SL AppleATIATA kext for 64-bit, would that be something I would need with my ATI chipset? If it's not AHCI you can use it, otherwise DSDT edit is preferable... Checking now, thanks! I also checked there, none found. I found you made a SL AppleATIATA kext for 64-bit, would that be something I would need with my ATI chipset? If it's not AHCI you can use it, otherwise DSDT edit is preferable... Link to comment Share on other sites More sharing options...
byransays Posted January 11, 2013 Share Posted January 11, 2013 If it's not AHCI you can use it, otherwise DSDT edit is preferable... Ah, I am using AHCI. My board has...issues with DSDT, but I believe I have it..."working" so I can always try enabling it(i have it disabled because I saw no difference with it enabled) EDIT: enabled my DSDT, no change. I might not have it patched right. Where would I find a ATI AHCI patch? Link to comment Share on other sites More sharing options...
mac_carol Posted January 11, 2013 Share Posted January 11, 2013 Checking now, thanks @Mac_carol I get an output of "find: -type: F: unknown type oops sorry... it's f (lower-case) and also try to add: /Volumes/Lion_hdd_name/ before the full-path Link to comment Share on other sites More sharing options...
byransays Posted January 11, 2013 Share Posted January 11, 2013 oops sorry... it's f (lower-case) and also try to add: /Volumes/Lion_hdd_name/ before the full-path Thanks, I did that. I take it if it doesnt find anything it will just show a new line waiting for input? because its not showing anything. I tried it again to no avail. Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 11, 2013 Share Posted January 11, 2013 Ah, I am using AHCI. My board has...issues with DSDT, but I believe I have it..."working" so I can always try enabling it(i have it disabled because I saw no difference with it enabled) EDIT: enabled my DSDT, no change. I might not have it patched right. Where would I find a ATI AHCI patch? Modify the SATA section like I did for someone in "Thoughts about Mountain Lion on AMD". Also add DTGP function Install iasl and use following command to compile it: iasl -tc DSDT.dsl Enable AHCI. Put new DSDT.aml in /Extra You should have HD working then and have it recognized like an Apple AHCI used controller Link to comment Share on other sites More sharing options...
claure Posted January 11, 2013 Share Posted January 11, 2013 hi, i am beginner, i create a bootable mountain lion 10.8.2 with this guide http://www.insanelymac.com/forum/topic/265839-guida-installare-lion-retail-su-qualunque-pc/ , what kernel should i use and where to put it,thankyou processore DualCore AMD Phenom II X2 Black Edition 550, 3067 MHz (15.5 x 198) scheda madre Sapphire PI-AM3RS785G DIMM1: 2 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 592 MHz) (6-6-6-16 @ 444 MHz) video ATI Radeon HD 4800 Series (512 MB Link to comment Share on other sites More sharing options...
byransays Posted January 11, 2013 Share Posted January 11, 2013 Modify the SATA section like I did for someone in "Thoughts about Mountain Lion on AMD". Also add DTGP function Install iasl and use following command to compile it: iasl -tc DSDT.dsl Enable AHCI. Put new DSDT.aml in /Extra You should have HD working then and have it recognized like an Apple AHCI used controller I found your DSDT you provided...I believe it was to The Connactic as the file is labled DSDT_theconn_fixed.zip. So you want me to use this DSDT? well no thats stupid, you want me to reference it? as in copy everything in the Device (SATA) and overwrite whats under my Device(SATA) Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 11, 2013 Share Posted January 11, 2013 I found your DSDT you provided...I believe it was to The Connactic as the file is labled DSDT_theconn_fixed.zip. So you want me to use this DSDT? and add DTGP? is this something I can find a patch for on the net? No, add the _DSM method of SATA to your own and add the DTGP function. Then recompile it and use that one... 1 Link to comment Share on other sites More sharing options...
byransays Posted January 11, 2013 Share Posted January 11, 2013 No, add the _DSM method of SATA to your own and add the DTGP function. Then recompile it and use that one... Sorry I am not so knowledgeable with DSDT edits I did what you said, added the _DSM to my DSDT and the DTGP. Still no change, KP with FakeSMC and dependency:com.apple.iokit.ioacpifamily would you like a screenshot? Link to comment Share on other sites More sharing options...
Andy Vandijck Posted January 11, 2013 Share Posted January 11, 2013 I found your DSDT you provided...I believe it was to The Connactic as the file is labled DSDT_theconn_fixed.zip. So you want me to use this DSDT? well no thats stupid, you want me to reference it? as in copy everything in the Device (SATA) and overwrite whats under my Device(SATA) add the _DSM part of SATA to your SATA part. Also add DTGP Sorry I am not so knowledgeable with DSDT edits I did what you said, added the _DSM to my DSDT and the DTGP. Still no change, KP with FakeSMC and dependency:com.apple.iokit.ioacpifamily would you like a screenshot? Is it OS X 10.8.2? My kernel is a 10.8.2 kernel... Link to comment Share on other sites More sharing options...
byransays Posted January 11, 2013 Share Posted January 11, 2013 add the _DSM part of SATA to your SATA part. Also add DTGP Is it OS X 10.8.2? My kernel is a 10.8.2 kernel... Sorry for the confusion, I am using ItzShanes Lion version of your kernel with your .diffs I am using 10.7.5 which they are all saying I should be using. EDIT: tried booting using -f again, this time no KP but it gets to failed to load FakeSMC and failed to load AppleOnboardPCATA error 0xdc008016 "couldnt alloc class AppleOnboardPCATARoot" without -f or if I use "usekernelcache=No" it just KP but doesnt say what for just panic + 0x260 and trap + 0x6fd Link to comment Share on other sites More sharing options...
Recommended Posts