bxe Posted December 29, 2018 Share Posted December 29, 2018 @goodguess I've done clear install, so that should be fine. System freezes are suddenly gone after few reboots, so it's really weird. But now I'm getting random graphic glitches (see picture attached), it is happening only in Firefox so maybe it's just its own problem. I'll probably try to install High Sierra instead as it seems to be more stable for now. Link to comment Share on other sites More sharing options...
goodguess Posted December 29, 2018 Share Posted December 29, 2018 Yup, such graphic glitches are annoying. If its just Firefox, Brave is the better, faster, non tracking, ad blocking browser. Link to comment Share on other sites More sharing options...
tluck Posted December 31, 2018 Share Posted December 31, 2018 (edited) @goodguess hmm. yeah just verified the odd behavior with JPG files. never noticed it before SO switched the model to MBP9,1 vs MBP11,1 - jgp view works in Finder and Preview as well - nightshift still works etc and will update as expected - mojave compatible. I have not tried to see if running as MBP8,1 is more stable. I will run with mbp9,1 for awhile to see if it works better. @bxe if you have 1600x900 LCD then maybe inject the "2e3" EDID. that ism, move config.1600x900.2e3.plist to config.plist (default) Edited December 31, 2018 by tluck Link to comment Share on other sites More sharing options...
namisloc Posted December 31, 2018 Share Posted December 31, 2018 (edited) Thank you, Goodguess. I'm running installs while I wait for the new wireless card. I'm not getting any bluetooth right now, are there steps to get the onboard bluetooth working? Also, my trackpad is working, but I'm not getting single touch, just x and y movement. Any ideas? Synaptics hardware, I believe. Edited December 31, 2018 by namisloc Link to comment Share on other sites More sharing options...
tluck Posted December 31, 2018 Share Posted December 31, 2018 15 hours ago, namisloc said: Thank you, Goodguess. I'm running installs while I wait for the new wireless card. I'm not getting any bluetooth right now, are there steps to get the onboard bluetooth working? Also, my trackpad is working, but I'm not getting single touch, just x and y movement. Any ideas? Synaptics hardware, I believe. what model do yo have? if you read the guide, you will see the note: Enable (turn on) Bluetooth so the green light is showing on the LCD bezel (do from Windows or Ubuntu). Also make sure the side switch is set to green too! on trackpad - use the apple system prefs to turn that feature on under trackpad - called tap to click Link to comment Share on other sites More sharing options...
namisloc Posted December 31, 2018 Share Posted December 31, 2018 22 minutes ago, tluck said: what model do yo have? if you read the guide, you will see the note: Enable (turn on) Bluetooth so the green light is showing on the LCD bezel (do from Windows or Ubuntu). Also make sure the side switch is set to green too! on trackpad - use the apple system prefs to turn that feature on under trackpad - called tap to click Weird thing, I can't access trackpad int he system pref. Bluetooth: This can't be accessed in the BIOS by chance, can it? I guess I'll have to make a USB bootable OS Link to comment Share on other sites More sharing options...
tluck Posted December 31, 2018 Share Posted December 31, 2018 (edited) @namisloc what model laptop do you have? what version macOS? did you put all the zip contents into the ESP as is? Edited December 31, 2018 by tluck Link to comment Share on other sites More sharing options...
Tetonne Posted December 31, 2018 Share Posted December 31, 2018 Happy New Year to all of You!! Link to comment Share on other sites More sharing options...
namisloc Posted January 1, 2019 Share Posted January 1, 2019 (edited) 6 hours ago, tluck said: @namisloc what model laptop do you have? what version macOS? did you put all the zip contents into the ESP as is? Sorry friend, I meant to put my build in my signature before making my last post. Bluetooth is working, however I'm unable to access any trackpad preferences. My BIOS was 1.49, and I downloaded what I thought was a 1.52 whitelisted mod, however it rolled my BIOS back to 1.41. Now, it's a modded 1.41, I have access to the advanced menu and whitelist removed. Sierra installed smoothly so I decided to just leave it be. I wanted the modded BIOS because I have 2x8gb DDR3 and an AR9280 on the way. The EFI folders were copied to ESP. Edited January 1, 2019 by namisloc Link to comment Share on other sites More sharing options...
goodguess Posted January 2, 2019 Share Posted January 2, 2019 (edited) Good you got your hack working so far, namisloc! Did you repair/refresh kext cashes fequently? If no, use Kext Utility to maintain system files after any changes you made to your hack. I´ll attach Kext Utility, just in case. Sierra is probably the best OS for a T420. If you have a spare SSD, you may always clone what you got and upgrade the clone to HS or Mojave, if you feel the need. A Atheros WLAN mPCIe should work as Airport. I´m using these, as they are supported OOB: https://www.ebay.com/itm/DELL-DW1510-Wireless-N-Wlan-Half-Mini-WIFI-Card-BCM94322HM8L-Dual-brand-0PW934/271557237987?epid=28023372237&hash=item3f3a129ce3:g:6oEAAOSwXeJXeTIW:rk:2:pf:0 Why your trackpad does not show up, remains a riddle to me. I have got a 4336-5U2 with everything working. EDIT: Went back to Sierra and the Trackpad setting there is not found either. Lenovo Trackpoint and Touchpad, do work though. Kext Utility.app.zip Edited January 2, 2019 by goodguess Sierra Trackpad Link to comment Share on other sites More sharing options...
alcheng3344 Posted January 2, 2019 Share Posted January 2, 2019 My Lenovo T420s is sierra,I have reinstall mojave on it,everything is perfect !! then someday I open apple maps ,it seem to be black screen.but I click "show all tabs". I can see the map thumbnail. Did anybody got the same problem ? Link to comment Share on other sites More sharing options...
leaddonkey Posted January 2, 2019 Share Posted January 2, 2019 Tluck & all other contributors - Thank you for your work in keeping this topic current and for the work past/present. I have been attempting to upgrade from El Capitan (HDD) on my T420 to High Sierra (SSD), but am unable to get the Dell 1510 card working with the 1.46 Bios mod. I have attempted to use the Wifi kext through the kext utility2 from RehabMan with the FakePCIID kext as well with no luck. Now that I punched my old HDD in to post, wifi does not work again so using a secondary PC. Everything else appears to work on HS (bluetooth, good video) just need to do the iMessage fix but don't want to do that until I get the wifi working. I may just pull the trigger and jump to Mojave, but wanted to talk to you all first. Let me know what other PC info you needed/code run in order to help troubleshooting. Thank you in advance. PC Specs: CPU: i5 - 2.59 GHz RAM: 16GB 1333 MHz Graphics: Intel HD 3000 SSD: Kingston 480GB Link to comment Share on other sites More sharing options...
Dabman1988 Posted January 2, 2019 Share Posted January 2, 2019 anyone have full solution step by step how to install Mojave on T420 (nvidia)? Link to comment Share on other sites More sharing options...
tluck Posted January 2, 2019 Share Posted January 2, 2019 @alcheng3344 did you properly install the HD3000 in /S/L/E? if not you may not have fully accelerated graphics QE/CI with Mojave @namisloc - you need to see if the VoodooPS2 kexts are loading. run: $ kextstat|grep voodoo 59 2 0xffffff7f82de1000 0xb000 0xb000 org.rehabman.voodoo.driver.PS2Controller (1.9.2) 39822203-AB99-38FA-85DB-A83BA02A60CA <11 7 5 4 3 1> 87 0 0xffffff7f82e0f000 0x6000 0x6000 org.rehabman.voodoo.driver.PS2Keyboard (1.9.2) 3D5B784B-4D8C-3838-BD2F-3AB5E20742A9 <59 48 15 7 6 5 4 3 1> 88 0 0xffffff7f82e15000 0xc000 0xc000 org.rehabman.voodoo.driver.PS2Trackpad (1.9.2) E616F856-B251-31D5-8A8F-767E322E1C24 <59 48 15 7 6 5 4 3 1> should see 3 items if good, then check ioreg: $ ioreg -l -w0|sed -n "/o ApplePS2SynapticsTouchPad/,/RM,Build/p" should look like this: | | +-o ApplePS2SynapticsTouchPad <class ApplePS2SynapticsTouchPad, id 0x10000028d, registered, matched, active, busy 0 (32 ms), retain 10> | | | { | | | "StickyMultiFingerScrolling" = No | | | "UnitsPerMMX" = 50 | | | "DisableZoneBottom" = 4200 | | | "HIDPointerConvertAbsolute" = <00> | | | "IOProviderClass" = "ApplePS2MouseDevice" | | | "HIDScrollResolution" = 52428800 | | | "MomentumScrollTimer" = 10000000 @leaddonkey did your wifi work before you upgraded from el cap to high sierra? if so, then maybe missing a kext? @Dabman1988 moving to Mojave is almost as easy as upgrading from Sierra to HighSierra. but i dont know about nvidia ? other than to recommend to disable it. 1) update your ESP with a recent version 2) get your current system running with a mojave config.plist which essentially means you change the model from MPB8,1 to MPB9,1. 3) install Mojave 4) on the post install side you need to install the HD3000 in /S/L/E. all of this is outlined in the Guide. 1 Link to comment Share on other sites More sharing options...
tonyyang123 Posted January 3, 2019 Share Posted January 3, 2019 I saw that the latest EFI has HD3000 in EFI\CLOVER\kexts\10.14\ , if I have already installed the HD3000 in the /S/L/E and than update EFI , will it affect? Link to comment Share on other sites More sharing options...
leaddonkey Posted January 3, 2019 Share Posted January 3, 2019 (edited) 5 hours ago, tluck said: @alcheng3344 did you properly install the HD3000 in /S/L/E? if not you may not have fully accelerated graphics QE/CI with Mojave @namisloc - you need to see if the VoodooPS2 kexts are loading. run: $ kextstat|grep voodoo 59 2 0xffffff7f82de1000 0xb000 0xb000 org.rehabman.voodoo.driver.PS2Controller (1.9.2) 39822203-AB99-38FA-85DB-A83BA02A60CA <11 7 5 4 3 1> 87 0 0xffffff7f82e0f000 0x6000 0x6000 org.rehabman.voodoo.driver.PS2Keyboard (1.9.2) 3D5B784B-4D8C-3838-BD2F-3AB5E20742A9 <59 48 15 7 6 5 4 3 1> 88 0 0xffffff7f82e15000 0xc000 0xc000 org.rehabman.voodoo.driver.PS2Trackpad (1.9.2) E616F856-B251-31D5-8A8F-767E322E1C24 <59 48 15 7 6 5 4 3 1> should see 3 items if good, then check ioreg: $ ioreg -l -w0|sed -n "/o ApplePS2SynapticsTouchPad/,/RM,Build/p" should look like this: | | +-o ApplePS2SynapticsTouchPad <class ApplePS2SynapticsTouchPad, id 0x10000028d, registered, matched, active, busy 0 (32 ms), retain 10> | | | { | | | "StickyMultiFingerScrolling" = No | | | "UnitsPerMMX" = 50 | | | "DisableZoneBottom" = 4200 | | | "HIDPointerConvertAbsolute" = <00> | | | "IOProviderClass" = "ApplePS2MouseDevice" | | | "HIDScrollResolution" = 52428800 | | | "MomentumScrollTimer" = 10000000 @leaddonkey did your wifi work before you upgraded from el cap to high sierra? if so, then maybe missing a kext? @Dabman1988 moving to Mojave is almost as easy as upgrading from Sierra to HighSierra. but i dont know about nvidia ? other than to recommend to disable it. 1) update your ESP with a recent version 2) get your current system running with a mojave config.plist which essentially means you change the model from MPB8,1 to MPB9,1. 3) install Mojave 4) on the post install side you need to install the HD3000 in /S/L/E. all of this is outlined in the Guide. @tluck - It did work in El Cap prior to the change. I tried porting over the IO80211Family.kext from El Capitan to High Sierra for the Broadcom BCM94322HM8L. I checked a few forms and did not see it on the list of kext which Apple did not bring forward and the data from https[:]//wikidevi[.]com/wiki/Broadcom_BCM94322HM8L showed BCM94322HM8L - 14e4:432b 802.11abgn 2T2R. Still not working, so back at it in the morning. Thanks for any/all the help. Also, tried bringing over my old config.plist to see if it "magically" worked for wifi. It did not, but my Serial # came over, so one less thing to do! (It's the little wins!!) Edited January 3, 2019 by leaddonkey Link to comment Share on other sites More sharing options...
tluck Posted January 3, 2019 Share Posted January 3, 2019 (edited) @leaddonkey - get these kext from the T460 repo vs T420 - these 4 kext may make it work: FakePCIID.kext FakePCIID_Broadcom_WiFi.kext BrcmPatchRAM2.kext BrcmFirmwareRepo.kext @tonyyang123 - the HD3000 kexts are in the kext/10.14 folder just as part of the zip (people asked for them instead having to get them from a High Sierra install) - they don't work right fully unless you put them in /S/L/E in my experience. so having these kexts duplicated in ESP is ok - the ones in OS /S/L/E should be used Edited January 3, 2019 by tluck Link to comment Share on other sites More sharing options...
leaddonkey Posted January 5, 2019 Share Posted January 5, 2019 On 1/3/2019 at 1:06 AM, tluck said: @leaddonkey - get these kext from the T460 repo vs T420 - these 4 kext may make it work: FakePCIID.kext FakePCIID_Broadcom_WiFi.kext BrcmPatchRAM2.kext BrcmFirmwareRepo.kext @tonyyang123 - the HD3000 kexts are in the kext/10.14 folder just as part of the zip (people asked for them instead having to get them from a High Sierra install) - they don't work right fully unless you put them in /S/L/E in my experience. so having these kexts duplicated in ESP is ok - the ones in OS /S/L/E should be used So tried the kexts from the T460 repo and did not work. Dug into some of my old notes from El Capitan (again thanks tluck) and ran lspci on a Ubuntu USB and noticed that I am running BCM43224 [14E4:4353] which is the DW1520. In reviewing other forums it looks like it might not work too well in High Sierra. Trying to force load the \System\Library\Extensions\IO80211Family.kext\Contents\Plugins\AppleAirPortBrcm43224.kext from my El Capitan HDD. I have the hex and a few other screenshots if anyone has a way to Force the kext to load or alter my kexts to patch. Side Note: If you got a system running, save that exact setup and write some notes in a textpad file. Never know when you'll have to dig deep due to a fubar HDD or just because you want to upgrade and it doesn't work on that 1st attempt. If this fails two questions: 1) Any other thoughts? If not, 2) What is a good Half mini pci card that'll work in both High Sierra and/or Mojave? want to attempt to "future" proof a bit because I like my hackbook! Thank you all. Link to comment Share on other sites More sharing options...
davidian Posted January 5, 2019 Share Posted January 5, 2019 (edited) @leaddonkey I have the same card, DW1520 will work almost OOB, without any extra kexts in Sierra/Mojave with just a small config plist patch: <dict> <key>Comment</key> <string>DW1520 Whitelist Patch (MBP11,1)</string> <key>Disabled</key> <false/> <key>Find</key> <data> TWFjLTJFNkZBQjk2NTY2RkU1OEM= </data> <key>Name</key> <string>com.apple.driver.AirPort.Brcm4360</string> <key>Replace</key> <data> TWFjLTE4OUEzRDRGOTc1RDVGRkM= </data> </dict> If you use for example MBP9,1, as tluck suggested recently, you will need to change the replace data appropriately (base64 encoding of Mac Board-Id). For MBP9,1 use TWFjLTRCN0FDN0U0Mzk0NTU5N0U= For El Capitan search here for DW1520, you will find the solution with MBP8,1. Edited January 5, 2019 by davidian 2 Link to comment Share on other sites More sharing options...
Tetonne Posted January 6, 2019 Share Posted January 6, 2019 (edited) i use a DW1510 BROADCOM BCM94322HM8L https://www.amazon.com/Brand-PW934-Half-Size-Wireless-802-11AGN/dp/B00B5A0NGU/ref=sr_1_fkmr0_1?ie=UTF8&qid=1542746683&sr=8-1-fkmr0&keywords=dell+1510+m+pci-e does a similar config plist patch is needed to optimize it? Edited January 6, 2019 by Tetonne 1 Link to comment Share on other sites More sharing options...
davidian Posted January 6, 2019 Share Posted January 6, 2019 i use a DW1510 BROADCOM BCM94322HM8L https://www.amazon.com/Brand-PW934-Half-Size-Wireless-802-11AGN/dp/B00B5A0NGU/ref=sr_1_fkmr0_1?ie=UTF8&qid=1542746683&sr=8-1-fkmr0&keywords=dell+1510+m+pci-e does a similar config plist patch is needed to optimize it? Not sure what you mean by optimizing it, I have this one too and it works out of the box, nothing needed (besides bios whitelist removal of course). 2 Link to comment Share on other sites More sharing options...
goodguess Posted January 6, 2019 Share Posted January 6, 2019 (edited) i use a DW1510 BROADCOM BCM94322HM8L https://www.amazon.com/Brand-PW934-Half-Size-Wireless-802-11AGN/dp/B00B5A0NGU/ref=sr_1_fkmr0_1?ie=UTF8&qid=1542746683&sr=8-1-fkmr0&keywords=dell+1510+m+pci-e does a similar config plist patch is needed to optimize it? Thats what I was asking myself either. So far my two DW 1510 were working oob since ElCap IIRC. If a config.plist edit would show the card as Apple instead of "Third-Party Wireless Card" it might be nice to have. If channel 12 and 13 in the 2.4GHz band could be enabled that way, it would be a real improvement. (I doubt that, flashing the card will be needed - not worth the hassle, I would suppose.) MBP 8.1 / 9.1 On my side, re-enabling Preview is bettering things a lot. However, I feel that a config.plist with MBP8.1 or MBP9.1 slows down things compared to MBP11.1. E.g. opening "About This Mac" or inserting a text string here by copy/paste seems to lag for a second or so. Which setting do you use or like best for Mojave? Edited January 6, 2019 by goodguess 2 Link to comment Share on other sites More sharing options...
namisloc Posted January 9, 2019 Share Posted January 9, 2019 On 1/2/2019 at 5:04 PM, tluck said: @namisloc - you need to see if the VoodooPS2 kexts are loading. run: $ kextstat|grep voodoo 59 2 0xffffff7f82de1000 0xb000 0xb000 org.rehabman.voodoo.driver.PS2Controller (1.9.2) 39822203-AB99-38FA-85DB-A83BA02A60CA <11 7 5 4 3 1> 87 0 0xffffff7f82e0f000 0x6000 0x6000 org.rehabman.voodoo.driver.PS2Keyboard (1.9.2) 3D5B784B-4D8C-3838-BD2F-3AB5E20742A9 <59 48 15 7 6 5 4 3 1> 88 0 0xffffff7f82e15000 0xc000 0xc000 org.rehabman.voodoo.driver.PS2Trackpad (1.9.2) E616F856-B251-31D5-8A8F-767E322E1C24 <59 48 15 7 6 5 4 3 1> should see 3 items if good, then check ioreg: $ ioreg -l -w0|sed -n "/o ApplePS2SynapticsTouchPad/,/RM,Build/p" should look like this: | | +-o ApplePS2SynapticsTouchPad <class ApplePS2SynapticsTouchPad, id 0x10000028d, registered, matched, active, busy 0 (32 ms), retain 10> | | | { | | | "StickyMultiFingerScrolling" = No | | | "UnitsPerMMX" = 50 | | | "DisableZoneBottom" = 4200 | | | "HIDPointerConvertAbsolute" = <00> | | | "IOProviderClass" = "ApplePS2MouseDevice" | | | "HIDScrollResolution" = 52428800 | | | "MomentumScrollTimer" = 10000000 Cheers, appreciate the help! Trackpad is blank in system preferences. Ran both scripts, here are the results. $ kextstat|grep voodoo 49 2 0xffffff7f82af9000 0xb000 0xb000 org.rehabman.voodoo.driver.PS2Controller (1.9.2) 39822203-AB99-38FA-85DB-A83BA02A60CA <11 7 5 4 3 1> 69 0 0xffffff7f82b3f000 0xc000 0xc000 org.rehabman.voodoo.driver.PS2Trackpad (1.9.2) E616F856-B251-31D5-8A8F-767E322E1C24 <49 41 15 7 6 5 4 3 1> 70 0 0xffffff7f82b4b000 0x6000 0x6000 org.rehabman.voodoo.driver.PS2Keyboard (1.9.2) 3D5B784B-4D8C-3838-BD2F-3AB5E20742A9 <49 41 15 7 6 5 4 3 1> $ ioreg -l -w0|sed -n "/o ApplePS2SynapticsTouchPad/,/RM,Build/p" | | +-o ApplePS2SynapticsTouchPad <class ApplePS2SynapticsTouchPad, id 0x100000259, registered, matched, active, busy 0 (114 ms), retain 11> | | | { | | | "StickyMultiFingerScrolling" = No | | | "UnitsPerMMX" = 50 | | | "DisableZoneBottom" = 4200 | | | "HIDPointerConvertAbsolute" = <00> | | | "IOProviderClass" = "ApplePS2MouseDevice" | | | "HIDScrollResolution" = 52428800 | | | "MomentumScrollTimer" = 10000000 | | | "SwipeDeltaY" = 800 | | | "HIDResetPointer" = Yes | | | "ScrollDeltaThreshY" = 10 | | | "BogusDeltaThreshY" = 800 | | | "HIDClickTime" = 500000000 | | | "ZoneRight" = 5200 | | | "IOClass" = "ApplePS2SynapticsTouchPad" | | | "FakeMiddleButton" = No | | | "StickyVerticalScrolling" = No | | | "UnsmoothInput" = Yes | | | "HIDInterfaceID" = 5 | | | "DisableZoneRight" = 1700 | | | "VendorID" = 1452 | | | "MaxTapTime" = 100000000 | | | "HIDPointerResolution" = 209715200 | | | "MomentumScrollMultiplier" = 98 | | | "UnitsPerMMY" = 50 | | | "HWResetOnStart" = Yes | | | "DoubleTapThresholdX" = 150 | | | "TrackpointScrollXMultiplier" = 1 | | | "Revision" = 24 | | | "RM,Build" = "Release-" | | +-o ApplePS2SynapticsTouchPad <class ApplePS2SynapticsTouchPad, id 0x100000259, registered, matched, active, busy 0 (114 ms), retain 11> | | | { | | | "StickyMultiFingerScrolling" = No | | | "UnitsPerMMX" = 50 | | | "DisableZoneBottom" = 4200 | | | "HIDPointerConvertAbsolute" = <00> | | | "IOProviderClass" = "ApplePS2MouseDevice" | | | "HIDScrollResolution" = 52428800 | | | "MomentumScrollTimer" = 10000000 | | | "SwipeDeltaY" = 800 | | | "HIDResetPointer" = Yes | | | "ScrollDeltaThreshY" = 10 | | | "BogusDeltaThreshY" = 800 | | | "HIDClickTime" = 500000000 | | | "ZoneRight" = 5200 | | | "IOClass" = "ApplePS2SynapticsTouchPad" | | | "FakeMiddleButton" = No | | | "StickyVerticalScrolling" = No | | | "UnsmoothInput" = Yes | | | "HIDInterfaceID" = 5 | | | "DisableZoneRight" = 1700 | | | "VendorID" = 1452 | | | "MaxTapTime" = 100000000 | | | "HIDPointerResolution" = 209715200 | | | "MomentumScrollMultiplier" = 98 | | | "UnitsPerMMY" = 50 | | | "HWResetOnStart" = Yes | | | "DoubleTapThresholdX" = 150 | | | "TrackpointScrollXMultiplier" = 1 | | | "Revision" = 24 | | | "RM,Build" = "Release-" sed: RE error: illegal byte sequence Link to comment Share on other sites More sharing options...
tluck Posted January 10, 2019 Share Posted January 10, 2019 @namisloc - odd i saw the same thing on Sierra . but installed the final Sierra Security patch and somehow the trackpad started showing up. Link to comment Share on other sites More sharing options...
Keviince Posted January 10, 2019 Share Posted January 10, 2019 @tluck Thanks for your manual , I had successfully installed Hackintosh on my T420 few days before. But I met some problems , can you help me out? 1. Some function keys don't work , just like F8 F8 , even Karabiner-EventViewer can't recognize then out. 2. I cant's use function keys as normal F1-12 keys. These two issues would be solved when I reinstalled the VoodooPS2Controller.kext , but when I reboot my system it goes wrong. 3. My screen will be blurred from time to time , especially high-load situation. Link to comment Share on other sites More sharing options...
Recommended Posts