Panas78 Posted December 20, 2012 Share Posted December 20, 2012 I've managed to setup HD4000 with DSDT Editing using ig-platform-id: 0166000A on a GA Z77 DS3H motherboard with i5 3570k. (DSDT fixes + patched AppleHDA)I have full acceleration and HDMI audio using HDMI output to my Sony TV.The problem is that it boots fine with 1920x1080p BUT if i try to change resolution to something lower than that everything gets messed up.The only way to have correct resolution change is to put computer to sleep and after wake everything is OK i can then change resolution to anything i want ,after reboot the problem appears again.I also tried with DVI to HDMI adaptor but same issue.Tried with latest chameleon from http://chameleon.osx86.hu Chameleon-2.1-r2069.pkg.zip and latest Chimera.Bios settings have been checked and Graphics Enabler in boot loader is disabled.(Also tried with out any dsdt and Graphics Enabler = True in Chimera but same results)Tried also MacPro3,1,MacMini5,1 and iMac12,2 if i remember correct.Any help will be appreciated. Link to comment Share on other sites More sharing options...
Panas78 Posted February 21, 2014 Author Share Posted February 21, 2014 Coming back and using modified ozmosis bios i have excellent results. BUT the same problem remains : Booting is fine everything works only problem is resolution change to something other than 1080 results in distorted image. The weird thing is that if i put computer to sleep after wake everything is fine and resolution change works as it should. The card is connected to SONY TV with Hdmi. By the way i have set vram variables for smb to mac mini 6,2. Link to comment Share on other sites More sharing options...
Panas78 Posted February 22, 2014 Author Share Posted February 22, 2014 I tried and the problem remains plus i lost hdmi sound Link to comment Share on other sites More sharing options...
Panas78 Posted March 15, 2014 Author Share Posted March 15, 2014 I tried every "AAPL,ig-platform-id" possible values in dsdt but the problem remains. Only way to show correct resolutions lower than 1080 is to put compauter to sleep and after wake everything is ok. I even compared ioreg before and after sleep but icannot spot any difference . If i boot computer and try to open a game with lower resolution than native everything gets messed up. I cant understand why after sleep and wake everything works but not after boot ? any suggestions ????????? Link to comment Share on other sites More sharing options...
fugedigergely Posted March 16, 2014 Share Posted March 16, 2014 Have you enabled DualLink? Link to comment Share on other sites More sharing options...
Panas78 Posted March 17, 2014 Author Share Posted March 17, 2014 Have you enabled DualLink? I dont even know how or what dual link is Link to comment Share on other sites More sharing options...
Recommended Posts