[AMD] Working Builds!

[darksides]

99% Working  

boot flag: “/amd64 GraphicsEnabler=No npci=0x3000 kext-dev-mode=1”

 

OS X Version: 10.10.1 (14B25)

CPU: AMD APU A10-6800k

Cooler: Corsair WAK liquid Cooling Hydro Series H60

PSU: Bequiet L8-430W Pure Power Modular 80+ Bronze 

Motherboard: Asrock FM2A85X-ITX
RAM: G.Skill 8GB PC 1866 CL9 KIT (2x4GB) 8GBSR Sniper
HDD: SANSUNG EVO SSD 250GB (x2)
USB: 2.0 and 3.0 All Works
GPU: Sapphire R9 280 (No kext necessary)

LAN: Realtek Pci Gbe Family ( Using “All in One Ethernet Solution” .pkg )
Sound: Through HDMI (no way to have volume mixer use monitor/TV to control volume. I don't know how install clover    to try patching DSDT and HDA audio )

Bootloader: Chameleon 

Kernel: amd64

Installation Guide: Hackintosh.Zone Yosemite edition

 

Anyone have solution for audio volume/kext?

 

Enjoy

[Mr. Xtreme]

 

First of all I couldn't have done this without the help of Spakk, Manumental, Bronya, Mieze and others  .

My build:

• AMD FX 6300
• Asus M5A78L-M/USB3 Motherboard
• 8GB Ram 1 Ballistix 4 GB 1600 MHZ DDR3 and 2 x 2GB 1066 Ghz other DDR3 Ram
• EVGA GTX 750 Ti 2GB 02G-P4-3751-KR
• OS X 10.10.3 Yosemite with Spakk's 1010.3
• And a lot of patience
• Oh and these boot flags "GraphicsEnabler=Yes kext-dev-mode=1 npci=0x3000" (Just set it up I am going to remove the need of -x -x Not needed on OOB installation  ).
• Drivers/Kexts VoodooHDA for Audio (haven't tested audio yet), RTL81111 network kext and generic USB 3.0 kext
• Usability status unknown: PS2, USB 3.0, HDMI (Onboard and on video card), SPDI/F Audio, iCloud. Messages.
• What works: Network with Mieze's RTL 8111 Kext, can't test qe/ci cause I'm in safe mode Full QE/CI App Store

 

• How to:
• Use bootflags -x GraphicsEnabler=No npci=0x3000 kext-dev-mode=1 when installing and on the first boot, than install the nvidia web drivers for your os x version and reboot and use those flags than open system prefs and go to nvidia driver options or something and select the web driver and reboot again with all these bootflags; GraphicsEnabler=Yes npci=0x300 kext-dev-mode=1.
• Install Yosemite as usual but open the log by pressing cmd + L (or windows key + L if your using a non os x keyboard).
• Once the installation has finished (It probably says installation failed, ignore that) then open terminal and type this; "mkdir /Volumes/NameOfTheHDYouInstalledYosemiteOn/System/Library/Kernels" (without the quotes) and press enter.  Then type; cp /System/Library/Kernels/kernel /Volumes/NameOfTheHDYouInstalledYosemiteOn/System/Library/Kernels and reboot and use the same boot args but boot from the drive you installed yosemite on.
• Notes. I used Chameleon bootloader for this, I will try clover and update this if necessary.  I created the drive manually, as in I didn't use something like pandora or u n i b e a s t  or createinstallmedia, I used the disk utility method.  
• Bios setting are default unless stated;
• virtual machine mode ---> Disabled Enabled after installation
• Set Bios setting to default
• Sata Mode ----------------> AHCI
• AMD Turbo Core --------> Disabled

• Advanced Clock Calibration = All Cores
     Unleashing mode ====> Disabled
     Active cores = Manual (3rd and 4th on and value = 0%)

   

 

Edited January 17, 2016 by XtremeHacker

[tragediana150]

Mavericks 10.9.0 - 10.9.5

Everything is Retail version of OSX

 

Motherboard: MSI 970A-G43

Chipset: AMD 970 + SB 950

CPU: AMD 6-Cores FX-6300 3.5 Ghz

Graphics: nVidia GeForce GTX 650 Ti 2048 MB DDR5 (working with full HD resolution on dual display with GE=No - works OOB)

Memory: GoodRAM 8GB 1333 MHz DDR3 (2x4GB)

Internet: RealtekRTL8111 LAN Ethernet (Lynx2Mac.kext or RealtekRTL8111.kext v.2.0.0.)

OSX: Mavericks 10.9.0-10.9.5

Kernel: every BSA_kernel (now I am using BSA_RC1_kernel from Bronya) (RC7_kernel works even better)

Boot flags: -f npci=0x3000 EthernetBuildIn=Yes

Bootloader: Newest Chameleon

 

P.S. iMessage, AppStore, iTunes works only with EthernetBuildIn=Yes. iCloud doesn't work but I am not using it, so I didn't make any tests yet.

 

:thumbsup_anim: And many many thanks again to spakk for the clear mind and fresh ideas! Thank you! :thumbsup_anim:

 

This is very stable and powreful build.

Cheers!! :thumbsup_anim:

[Hanfer]

OS: Yosemite 10.10.5

Motherboard: ASUS Sabertooth 990fx r2.0 

CPU: AMD FX9590 (currently @ 3600MHz)

GPU: NVIDIA GTX670
Memory: 16GB @ 1333 MHz

Kernel: Bronya RC3
Bootloader: Clover EFI r3330
Sound: Audioengine D1 (usb)

Ethernet: Realtek RTL8168
Kext: Patched AMD Kext + Ethernet Driver

Graphics Driver: Native and Web (both work)

Everything works as expected.
Even my 4k Monitor.
 

[derInselfan]

OS X: El Capitan need help! ===> Now El Capitan works.

El Capitan 10.11.2/Bronya RC1/Enoch

Yosemite 10.10.5/Bronya RC3

Mavericks 10.9.5

Mountain Lion 10.8.5

Snow Leopard 10.6.8/AnV's 10.6.8/Sinetek 10.6.8

Motherboard: GA MA78G DS3H

CPU: AMD Phenom II X4 920

GPU: AMD HD 7770
Memory: 4GB @ 1066 MHz

Kernel:
Bootloader: Clover EFI r3330

[Magomedov_05_RUS]

OS: Yosemite 10.10.5 RITAIL (OnlyAMD image)

Motherboard: Gigabyte Ga-78LMT-S2 

CPU: AMD FX6300 (currently @ 3500MHz)

GPU: MSI HD 4870x2
Memory: 8GB @ 1333 MHz (Kingston + Corsair)

Kernel: Bronya RC3
Bootloader: Clover EFI r3330
Sound: C-Media (usb) / ALC887

Ethernet: TP-Link Wireless card with atheros ar922x chipset

Kext: (No Lan kext, no FakeSMC, no PATCHET KEXT)

Graphics Driver: Not native, patch with CLOVER

[newhack]

CPU: AMD Athlon II X2 215 @ 2.71GHz

Motherboard: Pegatron M2N68-LA

Chipset:NVIDIA GeForce 6150SE nForce 430 ( AppleNForceATA )

RAM: 6GB 800MHz

HDD: 1x 2TB Seagate 1x 640GB WDC

USB : 2.0 All working front and rear with USBLegacyOff=Yes

GPU: PNY GeForce GT430 1GB ( Works OOB )

LAN: Realtek RTL8201N ( NForceLAN )

Sound: Realtek ALC662 ( Patched AppleHDA )

Bluetooth: USB Bluetooth stick ( Works OOB )

Sleep: PC Sleeps but Windows HDDs dont wake causing a force dismount ( not good for them )

Notes: System 99.9% Functional

Installed OS': Windows 10 Pro - El Capitan

 

Bootloader: Enoch

 

Installation Method: Retail USB

 

 

 

Which kernel are you using for el capitan 10.11.3?

[Shaneee]

Which kernel are you using for el capitan 10.11.3?

 

This one  http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=176213

[derInselfan]

This one  http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=176213

Boot my system well, but only from the ENOCH USB stick.

 

Not from Enoch in the ESP ... although install new ... ?

 

Edit: OS X 10.11.3 ... Ende gut, alles gut!

[533online]

I'm a total newbie to hackintosh, so take this all with a grain of salt. This is what I've done, and how far I have gotten to this point.

 

Asus ROG Crossblade Ranger

 

AMD A10 7870 APU, R7 integrated graphics on cpu.

 

UEFI bios

 

Bolton 4 chipset

 

Intel i211 integrated nic

 

generic sata DSDD Dvdr+w

 

One 3.5 inch hybrid Seagate ss/hd 1tb drive 7200 rpm

One 2.5 seagate 500 gb drive out of old Dell laptop 7200 rpm

 

logitech wireless keyboard and mouse, with logi wifi key plugged into

Asus keybot usb 2.0 port in back of mbd.

 

Ultra Mini USB WirelessLan802.11NAdapter - 1T1R (150Mbps)

One of those little buttons kinda like bluetooth, bought from monoprice.

Cheap, didn't think I'd need it, but after hackintosh build was I wrong.

 

External 2.1 pci speakers

 

UEFI bios setup:

In graphics settings, set to IGFX, integrated graphics

In boot settings, changed Windows UEFI os to Other os.

Everything else standard

 

1tb seagate partitioned with guid, running Ubuntu partition,

                    1 ntsf partition running Win 10.

 

several data partitions, keep all essential data on separate partitions from os systems

 

As UEFI will not recognize grub boot manager, switch os via UEFI boot manager

 

Hackintosh Build:

DL yosemite-zone10.10.1 iso from hackintoshzone

Burn iso image to dsdd 8 gig dvd with Infrarecorder

 

Boot into atapi dvd with yosemite-zone.iso boot dvd

 

f8 at boot up prompt

boot: /amd64 npci=0x2000 kext-dev-mode=1 <enter>

 

Trial and error revealed that my wifi button will run on the 55ebf etcetera All_In_One_Realtek_wifi.kext by

Deepak, I think. This can be gotten from hackintosh zone, along with a bunch of other essential kexts.

The wifi button gives me way better performance than any other wifi device I have at home, whether this

is because of the wifi button, the processor, the on board Intel Lan i211, which has no internal wifi, I can't

tell. I have gotten no lan kext to work the integrated Intel i211 chip. The wifi is clearly visible in sys info

and wifi utility.

 

I have working sound on VooDoohda installed by Yosemite-zone, through front pci connector. Got white noise,

until I went into VooDoo setup in system preferences and reset port in upper left corner from hdmi to 

pci, with second apci driver. Cranked up noise reduction slider way up, it affects the volume so set it where

you want. Set sound setup in sys preferences to pci front speaker. Test in Safari on youtube gives working sound

with reasonable clarity.

 

Choppy video approaching old dialup days. System info shows graphics through pci, with a whopping 3 megs

vram, although I'm using on board Integrated Graphics from the APU with a 2gb frame buffer. Whether web video 

is choppy because of the limited vram and graphics or the wifi connection is hard to tell. Sys info shows no graphics

kext loaded no matter what I try.

 

Although the dvd drive reads like a champ, I haven't tried writing a disk, it will not play a dvd movie. DVD player app

says the dvd drive is unsupported.

 

I've tried several graphics kexts, several kernels, several nic kexts and several hdmi kexts, all to no avail, Still get no

further than the basic setup described above. Tried ssdt audio and no go. I do get access to App Store, and dled

10.10.5 update, only to freeze after install  at the hackintosh logo with no progress bar. 

 

I tried Install El Capitan .app from get-into-pc with Macpwn, and clover recognizes the board, lists it with apu, memory,

graphics, nic, realtek Alc 1150, along with correct versions and revisions, but will not load el capitan install past Apple

logo with no progress bar, no matter what flags I have tried. [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url] will not recognize any el capitan install file I try,

app or dmg. 

 

If anybody has suggestions as to how to get hdmi sound, Realtek ALC1150 chipset, how to get APU graphics to load

more than 3 megs vram, or know of an APU Integrated graphics kext, or can show me an updated Yosemite kernel

that will give me better functionality on any of these fronts, It would be sincerely appreciated. 

[maximacs]

]Firstly, a HUGE thank you, to all of you, for the work you do.

 

I was given a working Asus A53U AMD C-60 CPU-based laptop with deceased HDD.  I fully realize that it’s an upstream challenge to ”tame” it with El Capitan but considered the task well worth the challenge.  Indeed, it’s already running reasonably well under El Capitan, courtesy of the most excellent AMD development team.

 

Web data suggests that the common A53U is very similar in specs to the also abundant Acer Aspire One AO722:

 

Processor: AMD Fusion APU C-60 (1 GHz and up to 1.33 GHz, dual core)

RAM: 2 GB

Graphics chip: AMD Radeon HD 6290

Hard Drive: Seagate ST320LT020 (320 GB)

Screen resolution: 1366x768 (etc.)

 

So, as this laptop was gratis, with yet further prospects for the gain column if OS X could be installed, I decided to take the challenge.  I did, however, invest in upgrading its RAM to 8GB and its dead HDD to a 240GB SDD.  If I can get this AMD machine fully operational, I propose to post a detailed “How-to” on the lines of the most useful recent web posts for OS X El Capitan on the Optiplex 780 and the Elite 8000 desktops.

 

A — What works:

 

Courtesy of Spakk's working kernel (10.11.2-AMD_6 / see notes below), the A53U already boots to El Capitan 10.11.2 under Enoch from an Apple Extended Journaled GUID formatted SSD (i.e. the system disk has an EFI partition but does not currently boot from EFI).  In comparison, it runs noticeably better than under Yosemite 10.10.3, tried earlier.

 

It has working Wifi (Apple / Dell Broadcom BCM4322 Card replacing its original Atheros mini card); working Audio / internal speakers and microphone (courtesy of VoodooHDA 2.8.8 installer pkg); working and recognized internal camera; working and recognized internal DVD; working sleep / wake / shutdown; working keyboard and mouse (and trackpad) … (although the trackpad is not recognized by System Preferences frameworks); all three USB 2.0 ports working (but see also notes below).

 

B — Not yet working:

 

“About This Mac” shows the following errors:

 

iMac (Summer 2001)

Processor GHz Intel Core 2 Duo

Memory only shows half its correct speed (800MHz but should read 1600 MHz)

Startup Disk - Unidentified

Graphics - Unidentified

Serial Number - Unidentified

 

“System Report” shows the following primary errors:

 

Ethernet card is unrecognized (“This computer does not appear to have any PCI Ethernet cards installed”)

Graphics / Displays unrecognized (“There was an error while gathering this information”)

USB ports are working but are not listed (“No information found”)

 

C — Notes

 

• Found Rampagedev’s AMD_EL_Capitan_Set-up-Files.dmg an extremely useful package.

• Had initially tried the 10112R1 AMD kernel but this failed and rebooted during kext loading.

• The 10.11.2-AMD_6 kernel worked! (Origin = Spakk's 10.11.2-AMD_6). See this link:

 

http://www.insanelymac.com/forum/files/file/526-amd-el-capitan-dmg

 

And this general link: 

 

http://www.insanelymac.com/forum/forum/522-os-x-1011-el-capitan/

 

Using MaciASL I was able to get an initial DSDT (see attachment 1) from the A53U which (remarkably?) had just two syntax errors flagged by the 5.1 compiler.  I was able to patch the first (see edited attachment 2) but the second error has confounded me. So anyone’s kind DSDT-editing help to create a finished and usable DSDT would be most gratefully received.

 

IORegistryExplorer implies that the issue with the Ethernet “card” at PE20 could be fixed by getting it to be properly identified in the DSDT and so to sign it to the en0 slot currently held by the installed Broadcom BCM4322 Card at PE21.  But, again, I need and would greatly appreciate assistance.

 

Chameleon Wizard bdmesg confirms that the onboard graphics are ATI Palm AMD Radeon HD 6290 in the ATI Radeon EVERGREEN family (additional info.: “Found ATI card! Device ID:[1002:9807] Subsystem ID:[104C1043] - Radeon [9807:00000000] AMD Radeon HD 6290 Graphics”); also that the onboard Ethernet “card” is Realteck RTL8111/8168 PCI-E Gigabit Ethernet [10ec:8168].

 

D — My questions at this juncture:

 

1. How to properly activate the AMD Radeon HD 6290 mobility graphics for accelerated / fully functional graphics?

2. How to properly activate the integral Ethernet “card”?

3. Is it possible that one of the several other available AMD kernels might be a better fit for the A53U?

4. Would a fully-edited / working DSDT help fix the above mentioned issues?

5. And / or would edits to specific system kexts help fix some of these issues?

6. Once the fixes have been made, would it be possible to boot using Clover / EFI?

Asus A53U IOReg & DSDT.zip

Asus A53U IOReg & DSDT Apr 20 2016.zip

[miko88]

My build:

AMD FX 8320

Asus M5A78L-M/USB3 Motherboard

8GB ECC DDR3 Ram 4 x 2GB

Gigabyte Nvidia GTX660 2 GB RAM

Sata II hard drive

Boot flags -v -f GraphicsEnabler=No kext-dev-mode=1 npci=0x2000

Drivers/Kexts VoodooHDA for Audio, RTL81111 network kext and generic USB 3.0 kext

Mavericks 10.9.0 + full update 10.9.5

 

• BIOS Setup: Sata Mode --> AHCI; virtual machine mode ---> Disabled Enabled after installation
• Create a installer with MyHack tool, replaced mach_kernel with this
• Once the installation has finished then open terminal and type this: cp /mach_kernel /Volumes/XXX
• Reboot and setup first access
• Upgrade witch combo update 10.9.5 but DON'T REBOOT!
• Replace kernel with this and replace this kext
• Reboot now and you have a full working 10.9.5

[Ratibor]

CPU: AMD FX-6200
Motherboard: ASUS Sabertooth 990FX
Chipset: AMD 990FX/SB950
RAM: 8GB
HDD: 1x 250 GB Seagate SATA2
GPU: GeForce GTX 750 Ti 1GB
LAN: Realtek8111 works with Realtek8111.kext
Sound: Esi Juli@ works with Juli@_XTe-Mac-v2_5.dmg

Installed OS: Yosemite 10.10.5, fully updated.

Kernel: Bronya -  kernel_10.10.5_rc3

 

Pathed IOPCIFamily.kext for msibase=0x90

http://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page-57?do=findComment&comment=2121146

 

Bootloader: Clover in ESP

 

 

P.S. Video created 29.03.2016 with internal ALC892.

31.03.2016 internal ALC892 - off, delete voodoohda, instal ESI Juli@.

 

[mimomomo]

Just finished installing OS X 10.9 on my build  

 

I didn't choose the parts for hackintoshing at first so there were compatibility issues at first

This was a BUDGET build

 

CPU: Amd a10 7850k

MOBO: Asus M-58-k

PSU: LC Power 450W

CASE: Antec 3000 Series 

RAM: 8gb Kingston HyperX 1886Mhz

GPU: Integrated radeon r7

HDD 1: 250GB Seagate (cheapest I could find)

HDD 2: 160GB Toshiba (from an old Dell laptop)

 

 

Only problem: Graphics lag in web browser (solved by going fulscreen)  

[latvian88]

Had some free time on my hands and i'm back on OSX

 

OS X 10.10.5 (14F1808) - fully up to date

CPU: AMD A8-5600K APU

Mobo: MSI FM2-A75MA-P33

RAM: 2 x 4GB DDR3 1600 MHz

GPU: GigaByte GeForce GTX 750Ti 2GB (GV-N75TD5-GI)

Ethernet: Realtek  RTL8111/8168B

Sound: onboard ALC887 (doesn't work properly) / Manhattan Hi-Speed 3-D USB Sound Adapter (works)

Kernel: Bronya_rc3

extra boot flags: npci=0x2000 nvda_drv=1 -f -v EthernetBuiltIn=Yes 

bootloader: Enoch

 

Kexts i used: FakeSMC (well, that's obligatory), NullCPUPowerManagement (for proper reboot/shutdown), RealtekRTL8111 (i-net).

Installed NvidiaWebDriver, because otherwise i couldn't get acceleration and OSX showed 0MB on my card.

 

The Bad...

With AppleHDA i was unable to get my onboard sound card to work (VooDooHDA worked, but had crackling sound all the way). I tried some kexts to remove the need for npci=0x2000 flag, but those kexts were too old for Yosemite and only made things worse. I'm seeing a little bit of stuttering when playing back 60fps videos. Nothing serious, but noticable (playback was smoother on my FreeBSD and Linux box).

 

The Good...

Everything works pretty much as it should be. Bought that USB sound card for only 7euros and surprisingly it works extremely good - so far i don't see any real difference between USB and onboard sound card. AppStore (don't care for Facetime, iCloud etc. so haven't tested those) works with "EthernetBuiltIn=Yes" flag and a properly generated SMBios.plist file. 

[Meat_Duck]

OS X 10.10.5 (14F1808)

CPU: AMD FX-4130

Mono: Gigabyte GA-78LMT-USB3

RAM: 4 x 4GB DDR3 1600 MHz

GPU: MSI Radio R9 270X 2GB

Ethernet: Realtek  RTL8111/8168B

Sound: Line6 Studio UX2

Kernel: Spakks AMD_FX_3.1.1

extra boot flags: npci=0x3000 GraphicsEnabler=YES usekernelcache=No WithKexts

bootloader: Clover Rev. 3577

Kexts: ACPIMonitor, AMDCPUMonitor, AppleLPC, ApplePCIIDE64bits, AppleVIAATA, FakeSMC, GenericUSBXHCI, JMicronATA, NullCPUPowerManagment, Patched_10.7_AppleRTC, Verde, VoodooPState, VoodooTSCSync

Please recognize: Use USBFix V3 made by Spakk, to get USB working. 

[EclipseSin]

OS X 10.11.6

CPU: AMD Phenom II x4 955 BE

Mobo: Asus Crosshair III Formula

RAM: 6GB (2 x 2GB, 2 x 1GB) DDR3 1333 MHz

GPU: XFX AMD Radeon HD 7770 1GB

Ethernet: Realtek  RTL8111/8168B

Sound: GPU/Radeon Audio

Kernel: Shaneee's 10.11.x RC2

bootloader: Enoch Chameleon v2795

Kexts: AppleACPIPS2Nub, ApplePS2Controller, FakePCIID,  FakeSMC, GenericUSBXHCI, JMicronATA, lspcidrv, NullCPUPowerManagement, Patched_10.7_AppleRTC, RealtekRTL8111, VoodooPS2Controller. VoodooPState

Also used USB Fix v3 for El Capitan by Spakk, modified AMDRadeonX4000

plist options

	<key>CsrActiveConfig</key>
	<string>103</string>
	<key>SSDT</key>
	<string>Yes</string>
	<key>EthernetBuiltIn</key>
	<string>Yes</string>
        <key>HDAEnabler</key>
        <string>Yes</string>
	<key>Graphics Mode</key>
	<string></string>
	<key>USBLegacyOff</key>
	<string>Yes</string>
	<key>GraphicsEnabler</key>
	<string>No</string>
	<key>UseKernelCache</key>
	<string>No</string>
	<key>Kernel Flags</key>
	<string>npci=0x2000 -v</string>
	<key>SMBIOS</key>
	<string>/Extra/SMBios.plist</string>

Edited July 28, 2016 by EclipseSin

[oSiRiS o_O]

Hi all !!! I'm new to the forum and is a pleasure to be part of the community, thank you for the work you do.

 

I wanted to share with you my experience ... I think this system by 99% running smoothly, the leg that at installation not got.

 

Install 10.10.1 and 10.10.3 migrate and then to 10.10.5 think the combo installation was not completely clean, when you upgrade to 10.10.5 14F1909 Nvidia drivers created a lag in producing bug finder. I had to replace phread.kext to fix missing serial number ... Apple store ... mail ... etc etc ...

 

I leave my settings if you can help me excuse me my English.

 

PD. Greetings to all and thank you very much for your work !!!

 

Installed OS: Yosemite 10.10.5 full updated and El Capitan 10.11.5 ( Waiting Kernel FX   ) 

 

Mobo: MSI 990FX-65GD

CPU: AMD FX -8350 Procesador de núcleos Ocho

RAM: 16 GB 1600 Crucial Ballistix

GPU: Nvidia GTX 960 4GB

 

 

Bootloader: Enoch-rev.2839

 

Kernel: 10.10.5 Bronya RC3

Extra boot flags:  -v  -f  npci=0x3000  nvda_drv=1 EthernetBuiltIn=Yes 

 

kext:

 - AppleACPIPlatform.kext IOACPIFamily.kext IOPCIFamily.kext AHCIPortInjector.kext

 - GPU: Nvidia Web Driver 346.02.03f01

 - Audio: ALC892 VoodooHDA 2.8.8

 - Lan: RealtekRTL8111.kext v.1.2.3

 - Wacom: PenTablet 5.3.6-6 

 

[Macguy2991]

Here's my working build  

 

Booted install with, "/amd1 -v npci=0x2000" using a distro "Yosemite Zone 10.10.1"

 

After install, used "msibase=0x90" and installed Chameleon and network kext.

 

I had an issue with Chameleon booting with msibase=0x90 automatically, so added to boot.plist

 

CPU: AMD 7850K Black Edition @ 3.7 Ghz
Motherboard: Gigabyte F2A78M-HD2
RAM: 16GB DDR3 1600Mhz
SATA: 128GB Kingston SSD, 3X 1TB Maxtor 7500 
USB 2.0: All ports working.
USB 3.0: All ports working.
GPU: XFX R9 380 (4GB model)
LAN: Realtek Gigabit Ethernet
Sound: Realtek HDA

 

[spakk]

I have the same pc as your specs. Did you get it to work with any macOS?

Please here do not ask questions! this site is intended only for finished builds.

If you require advice or assistance, then start a new thread. I'll delete shortly this message.

I've installed El Capitan 10.11.6 

[sedap]

 

 

My build

 

-MSI AM1I (AM1 PCIE x4)

-APU Athlon 5350 with R3 (R3 no works CI/QE)

-Kingston DDR3 4 G0 1600 (667)

-HD 6670 1024 low profile

-SSD SanDisk 128 GO 

-Lan RTL 8111

-Audio ?  (voodooHDA 2.8.4)

 

-kext : 

 

FakeSMC (V 2009)

IOPCIFamily  M 10.9 13A603

AppleACPIPlatform M 10.9 13A603

IOUSBFamily M 10.9 13A603

IOUSBMassStorageClass M 10.9 13A603

 

RealtekRTL8111

VoodooHDA 2.8.4

 

No use NullCPUPowerManagement

No use DSDT

No use SSDT 

 

use chameleon 2437 

the kernel Bronya rc2 use v1 opemu Bronya   (the Kernel 14.0.0 the Darwin the Version 14.0.0: Friday, November 14, 2014 00:59:36 (MSK); root: xnu -2782.1.97 / BUILD / obj / RELEASE_X86_64 x86_64)

 

Sleep no works 

USB3 no works works !!  

 

 

 

Software: All works except iCoud. (Useless)

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>EthernetBuiltIn</key>
	<string>Yes</string>
        <key>AtiConfig</key>
	<string>Lotus</string>
	<key>AtiPorts</key>
	<string>2</string>
	<key>Kernel Flags</key>
	<string>npci=0x2000 dart=0 -f</string>
</dict>
</plist>

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>SMbiosdate</key>
	<string>10/12/2012</string>
	<key>SMbiosvendor</key>
	<string>Apple Inc.</string>
	<key>SMbiosversion</key>
	<string>IM131.88Z.010A.B05.1210121459</string>
	<key>SMboardproduct</key>
	<string>Mac-FC02E91DDD3FA6A4</string>
	<key>SMfamily</key>
	<string>iMac</string>
	<key>SMmanufacturer</key>
	<string>Apple Inc.</string>
	<key>SMproductname</key>
	<string>iMac13,2</string>
	<key>SMserial</key>
	<string>C02LRU80DNMP</string>
	<key>SMsystemversion</key>
	<string>1.0</string>
</dict>
</plist>

machdep.user_idle_level: 0
machdep.cpu.max_basic: 13
machdep.cpu.max_ext: 2147483678
machdep.cpu.vendor: AuthenticAMD
machdep.cpu.brand_string: AMD Athlon(tm) 5350 APU with Radeon(tm) R3     
machdep.cpu.family: 22
machdep.cpu.model: 0
machdep.cpu.extmodel: 0
machdep.cpu.extfamily: 7
machdep.cpu.stepping: 1
machdep.cpu.feature_bits: 4528406856356068351
machdep.cpu.extfeature_bits: 1531285442464578559
machdep.cpu.signature: 7343873
machdep.cpu.brand: 0
machdep.cpu.features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH MMX FXSR SSE SSE2 HTT SSE3 PCLMULQDQ MON SSSE3 CX16 SSE4.1 SSE4.2 MOVBE POPCNT AES XSAVE OSXSAVE AVX1.0 F16C
machdep.cpu.extfeatures: SYSCALL XD 1GBPAGE EM64T LAHF LZCNT PREFETCHW RDTSCP TSCI
machdep.cpu.logical_per_package: 4
machdep.cpu.cores_per_package: 4
machdep.cpu.microcode_version: 21
machdep.cpu.processor_flag: 1
machdep.cpu.mwait.linesize_min: 64
machdep.cpu.mwait.linesize_max: 64
machdep.cpu.mwait.extensions: 3
machdep.cpu.mwait.sub_Cstates: 0
machdep.cpu.thermal.sensor: 0
machdep.cpu.thermal.dynamic_acceleration: 0
machdep.cpu.thermal.invariant_APIC_timer: 0
machdep.cpu.thermal.thresholds: 0
machdep.cpu.thermal.ACNT_MCNT: 1
machdep.cpu.thermal.core_power_limits: 0
machdep.cpu.thermal.fine_grain_clock_mod: 0
machdep.cpu.thermal.package_thermal_intr: 0
machdep.cpu.thermal.hardware_feedback: 0
machdep.cpu.thermal.energy_policy: 0
machdep.cpu.xsave.extended_state: 7 832 832 0
machdep.cpu.arch_perf.version: 0
machdep.cpu.arch_perf.number: 0
machdep.cpu.arch_perf.width: 0
machdep.cpu.arch_perf.events_number: 0
machdep.cpu.arch_perf.events: 0
machdep.cpu.arch_perf.fixed_number: 0
machdep.cpu.arch_perf.fixed_width: 0
machdep.cpu.cache.linesize: 64
machdep.cpu.cache.L2_associativity: 16
machdep.cpu.cache.size: 2048
machdep.cpu.tlb.inst.small: 32
machdep.cpu.tlb.inst.large: 8
machdep.cpu.tlb.data.small: 40
machdep.cpu.tlb.data.small_level1: 512
machdep.cpu.tlb.data.large: 8
machdep.cpu.tlb.data.large_level1: 256
machdep.cpu.address_bits.physical: 40
machdep.cpu.address_bits.virtual: 48
machdep.cpu.core_count: 4
machdep.cpu.thread_count: 4
machdep.vectors.timer: 221
machdep.vectors.IPI: 222
machdep.pmap.hashwalks: 1685760
machdep.pmap.hashcnts: 3409483
machdep.pmap.hashmax: 39
machdep.pmap.kernel_text_ps: 2097152
machdep.pmap.kern_pv_reserve: 4000
machdep.memmap.Conventional: 4238385152
machdep.memmap.RuntimeServices: 0
machdep.memmap.ACPIReclaim: 0
machdep.memmap.ACPINVS: 798720
machdep.memmap.PalCode: 0
machdep.memmap.Reserved: 38842368
machdep.memmap.Unusable: 0
machdep.memmap.Other: 0
machdep.tsc.frequency: 2049999300
machdep.tsc.deep_idle_rebase: 1
machdep.tsc.nanotime.tsc_base: 60199215827
machdep.tsc.nanotime.ns_base: 0
machdep.tsc.nanotime.scale: 2095106713
machdep.tsc.nanotime.shift: 0
machdep.tsc.nanotime.generation: 2
machdep.misc.panic_restart_timeout: 1266874889
machdep.misc.interrupt_latency_max: 0x0 0xde 0x71ae1
machdep.misc.machine_check_panic: 
machdep.misc.timer_queue_trace: 
machdep.misc.nmis: 0
machdep.eager_timer_evaluations: 885
machdep.eager_timer_evaluation_max: 522033
iMac-the-gils: ~ $ gils 

Can you tell me which Yosemite build  did you use ?

 

 

[zar2603]

CPU: AMD FX - 4100 OC 4.0 Ghz 
Motherboard: Asus M5A78L-M LX V2

Chipset:AMD 760G (780L)/SB710

RAM: 8GB 800MHz DDR3 Kingston
HDD: SSD 128 Gb Kingston Hyper X- 1 Tb Seagate 
USB : 2.0 All working front and rear 
GPU: GeForce GTS 450 1GB (GE=Yes)
LAN: Realtek RTL8111N

Sound:Focusritte Scarlette 2i2 Usb

Installed OS':Yosemite 10.10.5

Bootloader: Enoch

Installation Method: Retail USB

[Hoshi Yamazaki]

 

CPU: Athlon 640 No-OC
Motherboard: Asus m5a97

RAM: 12gB 1333mhz
HDD: Samsung Evo 850 (SSD) for OS X (I got also HDD for Linux/Windows). 
USB : All working, maybe some issues, not sure.
GPU: 6790 HD 1gB vRAM No-OC (yes, it works, but got slower performance than Intel's iGPU and also when I play CS:GO there are some graphical issues)
LAN: Built-in mobo

Sound: Built-in mobo

Installed OS: El Capitan 10.11.6 + Ubuntu 16.04 + Windows 10

Bootloader: Enoch

Installation Method: Retail USB, because distros are for noobs!

[cyrhex]

CPU:amd a10 5800k

MOBO:asus f2a85 v-pro

RAM:8GB

STORAGE:toshiba 1tb 7200rpm hdd,sandisk x300 ssd

USB:usb 3.0 using caldigitfastio.kext,usb 2.0 all ports are working using appleusbohcipci.kext

LAN:realtek 811

GPU:Palit 8500 gt

SOUND:alc 892 voodoo hda

Bootloader:Clover 4049

Installed OS:mavericks 10.9.0.yosemite 10.10.4,macOS sierra 10.12.4

[Shaneee]

Thought I'd post an update on my System

 

 

CPU: AMD FX 4300

 

Motherboard: GIGABYTE 78LMT-USB (rev 6.0)

Chipset: North Bridge: AMD 760G - South Bridge: AMD SB710 (SuperVIAATA.kext)

RAM: 6GB

HDD: 1x 2TB Seagate 1x 640GB WDC 1x500GB WDC

USB : 2.0 / 3.0 Both Working

GPU: GeForce GT430 1GB ( Works OOB with GraphicsEnabler=Yes )

WLAN: Atheros AR5B91 with PCI Adapter ( Works OOB )

LAN: Realtek RTL8111 ( RTL8111.kext )

Sound: HDMI

Sleep: Works ( Sort Of )

Monitor: 32" HD TV ( Spoofed as Apple Thunderbolt Display )

Bootloader: Enoch installed to ESP set to auto boot OS X

Other: iCloud on El Capitan/Sierra works OOB. Working Bluetooth.

Installation Method: Retail USB

Installed OS': Sierra 10.12.4 - El Capitan 10.11.6 - Windows 10 Pro Insider