[AMD] Working Builds!

[Thunderbolt]

Perfectly working 10.9 :

 

 AMD FX 6300 

 8GB RAM

 HD 7750 2 GB 

 Ga 880-gm-usb 3 rev 3.1

 Acer 20" x 2 (DVI / VGA) 

 Voodoohda 2.8.4 

 

 Flags Used :    npci=0x2000 GraphicsEnabler=No 

 

 Using only for X plane 10 but performance is not up to par. else everything else is nice and fast.

 

Will try the other R9 Kernel and check performance.

[lightskreen]

 My build went surprisingly smoothly. The only things that don't work are little and can't be bothered with.

CPU: AMD FX-6300 3.5 GHz working without NCPUPM.kext. Shows up as "3.5 GHz unknown" in about this mac. Help with that is always appreciated.

RAM: 8 GB DDR3 @ 1600 mhz dual-channel. In about this mac it shows up as "8 GB ???". Any help would be appreciated.
 

GPU: MSI GTX 760. Shows up as an NVIDIA Geforce GTX 760 and runs smoothly out of the box. The web drivers for 10.9.1 SEEM to make it feel faster.

HDD's: Installed onto a 64 GB Sandisk SSD alongside windows 8.1 purely gpt/uefi as well as a 1 TB WD Blue for data. I would like to know how to set it so that OS X always is the default boot option for clover, even if I boot into windows. If I boot into windows in fast mode, it never lets me select OS X again and I would like to have it just default to OS X and have access to windows whenever I need it.

Motherboard: Asrock 990fx extreme3. all usb 2.0 work perfectly as well as 3.0 with a PXHCD.kext installed. Ethernet works perfectly after installing a modified IONetworkingFamily.kext.

Wifi: Atheros AR938x chipset. Great signal and works out of box.

Bootloader: Clover revision 2652. Installer boots with "npci=0x2000 -x", The working install boots with "npci=0x2000" only which I have set in the config.plist.

Kernel: My kernel is the one from this link. http://www.osx86.net/files/file/3736-amd-10910911092-kernel-update-iii-with-full-sse4-support/

If there's a better one, suggest it to me, but this is the best I could find for my build.

OS: All of this was completed on Mavericks 10.9.1 and some of the beginning stages were done on 10.9.0. I used Windows 8.1 Professional because some games just can't run on Mac OS.

[tragediana150]

Snow Leopard 10.6.8 / Mavericks 10.9.0 / Mavericks 10.9.1

Everything is Retail version of OSX

 

Motherboard: Gigabyte GA-M56S-S3 Rev. 1

Processor: AMD Athlon 64 X2 6000+ 3.00GHz

Memory: 6GB DDR2 800MHz (2x2GB + 2x1GB)

Chipset: nVidia nForce 560

Graphics: nVidia GeForce GT 640 2048MB DDR3

Graphics on 10.9.0.-10.9.1 works with Dual Displays in full HD resolution (2xHDMI or 1xHDMI and 1xDVI) (VGA ports do not work at all)

Graphics on 10.6.8 works with adding Natit.kext

Audio: Realtek ALC888

Audio 2: M-Audio Fast Track II

LAN Internet: Tenda Repeater working with LAN cable

Bootloader: The newest Chameleon

Kernel for 10.9.0-10.9.1: Sineteks v6_kernel or any kernel from Bronzovka or Andy (almost every kernel boot to the desktop)

Kernel for 10.6.8: Nawcom Legacy Kernel v1 or Legacy Kernel v2

Boot flags with 10.9.0: npci=0x2000

Boot flags with 10.9.1: npci=0x2000 -f

Boot flags with 10.6.8: arch=i386 arch=x86_64 PCIRootUID=1

 

Mavericks is more functional and less problematic than Snow Leopard. Almost everything works perfect.

I did not try the onboard Audio becuase I've got Audio Interface from M-Audio.

AppStore = working

iTunes = working

iMessage = seems to work

iCloud = I have no time to check this and I will report back later

Edited March 30, 2014 by tragediana150

[Mikeszf]

OS:

-Mavericks 10.9.0/10.9.1/10.9.2 (Replacing the respective kexts)/ 10.9.4 (With bronya's rc2 kernel) / 10.9.5 (with rc2_kernel and replacing IOHIDFamily with the 10.9.4 version)

 

Motherboard: 

-Gigabyte Ga-970a-UD3 Rev. 1.0 Bios F7

-Virtualisation on

-AHCI and hybrid bios/uefi enabled. Windows 8 also works on GUID, though chameleon doesn't recognise it.

-RAM Speed manual on 1600Mhz

 

Processor: Desktop

-AMD Phenom II X4 965 BE

 

RAM:

-Corsair Vengeance 2x4GB 1600mhz

 

HDD:

-1TB WD (MBR: windows, storage, time machine…) + 250GB WD (GUID: mac).

*The motherboard has no IDE support

 

Sound: 

-Realtek ALC 889

-With VodooHDA 2.7.3 + Settings loader. 

-Midi settings  192000.0 Hz 16bit for no crackling

-Works only the green port. haven’t tried getting full 5.1 as my sound system burned :’(. 

-Back and front panel working.

-Microphone also works with bit of tweaking from the VodooHDA settings panel, the front one works almost as windows with just a minor feedback if too loud on the mic.

-The midi settings resets for the active output if an app uses the it e.g. Skype. Not all the times though.

-Haven’t tried to get auto detection working.

-No HDMI audio thru the video card, haven’t tried to fix it.

 

Network: 

-Realtek 8111E 

-With Lnx2Mac RealtekRTL81xx.kext.

-Again no auto detection. Had to connect the cable and re add the adapter from the settings.

-Atheros AR9285 PCI-e 1x card 

-With AirPortAtheros40.kext on S/E/E

 

Graphics: 

-Sapphire Radeon HD 6870 (100314-3L)

-Works perfectly with full QE/CI, can even play portal 2 with max graphs.

-Tried with 2 monitors at the same time, hdmi and dvi and worked fine as well, no auto detection though; it may randomly detect, very rare.

*This motherboard has no integrated graphics

 

USB: 

Both 2.0 and 3.0 work

-Don’t know about the 3.0 port speed, I mostly use them to charge my kindle and it mounts just fine. 

-I use the Zenith432 GenericUSBXHCI.kext for the 3.0

 

Optical drive: 

-Works fine, can’t remember the model and don’t have it connected as I don't actually use it and the led flashes every now and then on mac. 

-Burned some DVD's perfectly.

 

PS/2: 

-Not tested.

 

Kernel:

-sinetek’s 10.9.0_v4. (Tested from 10.9 to 10.9.2)

-Can’t shut down. Only restart but I don’t care as I don’t use to shut it down. If I need to, power button on the bios post… 

-The computer doesn't wake up after sleep either but again I don't care.

-The display can go sleep perfectly 

-Bronya's 10.9.4 rc2 (Tested on 10.9.4 - 10.9.5)

-Reboot and Shutdown work

-Has some graphic glitches on Finder and launchpad; taking screenshots; imessage; the album arts of itunes in the notifications and images on pages (mostly with jpg).

 

Boot Flags:

<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>-v npci=0x2000</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string> 

-The spakk no npci=0Xxxx works fine but disables the PCI card, which I use…

 

Bootloader: 

-Chameleon v2.2svn r2286. 

-Chimera and clover work as well

 

Notes:

-I used myhack for the installation in a GUID partition. MBR works but the first boot has to be done on secure mode (-x) and install the 3rd party sata drivers from some animalistic post installation tool. I use the Install ESD found on the App Store .app

-Any kernel panic while booting afterward gets fixed by deleting the com.apple.kext.caches folder. Tend to happen if changing kexts or the pc didn’t shut down properly.

-Can’t Open photoshop CS6 (CS5 works just fine).

-I was able to play skyrim in a high setting with parallels, almost max but the mouse wasn't captured so the camera was constrained to the movement of the mouse on the screen borders; the same will probably happen with any other game. Have windows so didn’t tried to fix it…

-Have been using it for a few months. I want it to post this after everything was working fine as I started only with graphics and WiFi with the above kext.

-I don’t use a DSDT as for Murphy's law each time I try to, some horrible random non-related issue happens.

 

 

[internal]

CPU: AMD A8-4500M

Ram: 6GB DDR3

Build: OSX Mavericks 10.9

Kernel: bronya_rc8 rccfix

Boot Flags: -v -x GraphicsEnabler=No

PC: Samsung NP355V5C

Working: Keyboard and part touchpad

Not working: USB Support for non HFS+ Drives, No Bluetooth, No wifi or wifi support via usb, doesnt sleep, touchpad gestures, APU-Graphics not working

Edited April 7, 2014 by internal

[tragediana150]

Mavericks 10.9.0 - 10.9.4

Everything is Retail version of OSX

 

Motherboard: Asus M5A78L-M LX3 (760G PCI-E DDR3)

Chipset: 760G

CPU: AMD 6-Cores FX-6300 3.5 Ghz

Graphics: nVidia GeForce GT 640 2048 MB DDR3 (working with full HD resolution on dual display)

Memory: GoodRAM 8GB 1333 MHz DDR3 (2x4GB)

Internet: Qualcomm Atheros 8161/8171 LAN Ethernet

OSX: Mavericks 10.9.0-10.9.4

Kernel: every BSA_kernel (now I am using BSA_V9_kernel) or RC1_kernel / RC2_kernel from Bronya

Boot flags: -f npci=0x3000 (or npci=0x2000)

Bootloader: Newest Chameleon

 

This is very stable and powreful build. Thanks to @spakk for helping with my new build.

Cheers!! :thumbsup_anim:

Edited August 23, 2014 by tragediana150

[carlo_67]

Motherboard: asRock Fatal1ty 990fx Killer (the best)

Chipset: 990

CPU: AMD Phenom 2 x6 1075 t

Graphics: ati asus 5770 x2 CrossFirex 

Memory: Crucial Ballistix sport 1600 MHz DDR3 (4x4GB)

Internet: Qualcomm Atheros Killer e 2200 LAN Ethernet

OSX: Mavericks 10.9.0-10.9.2-10.9.3

Kernel: every BSA_kernel 

Boot flags: -f  npci=0x2000)

Bootloader:  Chameleon 2378

Sound: -Realtek ALC 1150

I used PANDORA

[fishhelmet]

 

Motherboard: asRock Fatal1ty 990fx Killer (the best)

Chipset: 990

CPU: AMD Phenom 2 x6 1075 t

Graphics: ati asus 5770 x2 CrossFirex 

Memory: Crucial Ballistix sport 1600 MHz DDR3 (4x4GB)

Internet: Qualcomm Atheros Killer e 2200 LAN Ethernet

OSX: Mavericks 10.9.0-10.9.2-10.9.3

Kernel: every BSA_kernel 

Boot flags: -f  npci=0x2000)

Bootloader:  Chameleon 2378

Sound: -Realtek ALC 1150

I used PANDORA

 

Two questions for you:

 

1: is there any chance you feel like providing a little bit more info about your install? My builds keep getting screwed up when upgrading to 10.9.2 from 10.9.1 so any tips would help.

 

2. How do you like that motherboard? I was thinking about buying it because I've been having some issues with my current board and its down to that one or the asus sabertooth

[carlo_67]

Two questions for you:

 

1: is there any chance you feel like providing a little bit more info about your install? My builds keep getting screwed up when upgrading to 10.9.2 from 10.9.1 so any tips would help.

 

2. How do you like that motherboard? I was thinking about buying it because I've been having some issues with my current board and its down to that one or the asus sabertooth

my guide is in Italian, if you can translate it 

find it here http://www.insanelymac.com/forum/topic/295155-guida-amd-osx-mavericks-su-amd-con-pandora/ 

 

regarding the motherboard is great, price € 108

[mikazo]

motherboard: ASUS M5A78L-M

processor: PHENOM 965

graphics: HD 6000 series

 

osx: mavericks 10.9.0

distro: niresh

boot flags: amd64 arch=x86_64 npci=0x3000 -v

 

spent a while trying to make an official copy of 10.9.2 work with myhack - tried a variety of boot flags then a variety of kernels - i think the new 10.9.2 AMD kernel is not ready yet

[xW4LK3R]

CPU: AMD Athlon II X2 250 3.0 GHz;

Motherboard: ECS A780LM-M2;
RAM: 4GB DDR3; (Dual channel)
IDE: NO;
USB: 2 front ports | 4 rear ports; 
GPU: ZOGIS GT 2220 1 GB; (working)
SATA: Hitachi 160 GB HDD / 1TB SAMSUNG HDD
SOUND: Working

 

Hitachi HD (160GB):

OS: OS X 10.9 Mavericks (Niresh's distro);

Installation Method: USB (Flashdrive): OSX-Mavericks DMG burned with Rosa image writer Post boot in customize, Bootloader configuration > SMBios > Unselect 3,1 and change to 4,1.

Bootloader: Chameleon

Bootflags: Pre install: amd64  Post Install with USB: Select HD and write "Kernel Cache"=\amd64 -v

 

Diagnostic: 64-32 apps working, launchpad bugs (red icons), Graphics work but with lags sometimes (in dock)

 

 

[tip1988]

CPU        AMD Athlon(速龙) II X2 240 双核

BIOS        技嘉 GA-MA785GM-US2H（DSDT sleep）
RAM       5120 MB ( 金士顿 DDR2 800MHz )
SATA      西数 WDC WD5000AAKS-00N7B0 ( 500 GB / 7200 转/分 )
GPU       Nvidia GeForce 210 ( 128 MB )
声卡        瑞昱 ALC885 @ ATI IXP SB600/SB700/SB800 高保真音频（万能）

网卡        瑞昱 RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC / 技嘉

 

 

10.9.3 13D61 new up!!!

[spakk]

CPU: AMD Athlon II X2 250 3.0 GHz;

Motherboard: ECS A780LM-M2;

RAM: 4GB DDR3; (Dual channel)

IDE: NO;

USB: 2 front ports | 4 rear ports; 

GPU: ZOGIS GT 2220 1 GB; (working)

SATA: Hitachi 160 GB HDD / 1TB SAMSUNG HDD

SOUND: Working

 

Hitachi HD (160GB):

OS: OS X 10.9 Mavericks (Niresh's distro);

Installation Method: USB (Flashdrive): OSX-Mavericks DMG burned with Rosa image writer Post boot in customize, Bootloader configuration > SMBios > Unselect 3,1 and change to 4,1.

Bootloader: Chameleon

Bootflags: Pre install: amd64  Post Install with USB: Select HD and write "Kernel Cache"=\amd64 -v

 

Diagnostic: 64-32 apps working, launchpad bugs (red icons), Graphics work but with lags sometimes (in dock)

 

 

nice girl

[martodim]

CPU: AMD FX-6100 3.3 GHz Six-Core
Motherboard: ASUS M5A88-M
RAM: 4+4 GB DDR3 Corsair Vengeance 1600MHz
SATA: 1TB WD Caviar Green+ 250GB Seagate Barracuda 
USB:4 Rear USB 2.0 Working + 2 Rear USB 3.0 Working
GPU: AMD Radeon HD 6450 1GB DDR3 (Also a not tested integrated AMD Radeon HD 4250 which will be tested also later) + nVidia 9800GT 512MB DDR3
LAN: Working like a charm. 
Audio: Working just fine. I used All in one Audio Solution 1.0.  http://www.niresh12495.com/files/file/136-all-in-one-audio-solution/
PS2: Not tested
Sleep: Can't wake up yet 

Used Niresh distro for Mavericks 10.9.0--> Installed with amdfx -v boot flags on 250GB HDD, used Disabler instead of NullCPU in Customize Options in installation, Set GraphicsEnabler=no, not installed audio and ethernet drivers. Used default bootloader. Im not getting stuck on the first time setup. Information will be updated when fully tested. Everything seems to work fine on first sight. I will also try to get 10.9.3

 

 

 

 

 

 

 

 

 

I am seeking for some help. Got a nVidia GeForce 9800GT 512MB DDR3. I replaced the 6450 Radeon with the nVidia but it won't boot. After loading [iOBluetoothHCIController][start] -- completed screen just goes black.. I can get only to boot the PC when I moved all nVidia, ATI, Intel Graphics Kexts to Backup folder. But now I get only 1024x768 no QE/CI. Ideas how to fix this? 

 

 

FIX!!! When installing Niresh 10.9.0 Distro DO NOT CHOOSE any different SMBios than the default selected in the installer. Install like that and first boot should be with -f flag. Then just add -f in the boot.plist file. nVidia 9800GT 512MB DDR3 works like a charm with QE/CI. ALWAYS USE DVI PORT ON GRAPHICS CARD OR IT WON'T WORK (I am using DVI to VGA adapter-DVI is plugged in the graphics card port). Further testing will be made today by playing League Of Legends game to see how the graphics card performs. POST WILL BE UPDATED LATER. Screenshots from the nVidia 9800GT configuration down below.

 

 

 

 

Tests were finished. The nVidia performs really well on high-quality games (though chess still lags   ).

[carlo_67]

Motherboard: asRock Fatal1ty 990fx Killer (the best)

Chipset: 990

CPU: AMD FX 8350 Black Edition

Graphics: ati asus 5770 cucore + Sapphire 5770 hd CrossFirex

Memory: Crucial Ballistix sport 1600 MHz DDR3 (4x4GB)

Internet: Qualcomm Atheros Killer e 2200 LAN Ethernet

OSX: Mavericks 10.9.0 - 10.9.2 - 10.9.3 Release

Kernel: every Rc4 Bronya

Boot flags: -f  npci=0x2000)

Bootloader:  Chameleon 2378

Sound: -Realtek ALC 1150

I used PANDORA

[martodim]

Hi,

 

I'm struggling with my own installation with a GeForce 9800GT. I had it working natively under SL 10.6.8 after a DSDT patch (nVidia 9800GT injection + PCI0 root set to 0). In Lion 10.7.5, ML 10.8.5 and Mav 10.9.0 I had to use NVEnabler64 to get the card to work (with some very minor graphics glitches in Mav).

 

No such luck since 10.9.2 and 10.9.3: I'm either just getting black screen when NVEnabler64 is not used and just getting the white/light gray screen with moving mouse pointer when NVEnabler64 is used. I only reach desktop by booting in safe mode. :-(

 

Could you indicate:

. which SMBIOS profile/plist you used?

. which FakeSMC version you have?

. which SMC version you use?

 

Ideally, if you could post the SMBIOS.plist + FakeSMC.kext and SystemProfiler's saved output, that'd be great!

 

What I have used is the default setting which the Niresh Distro uses. The SMBios I believe was MacPro 3.1 or something like that. Everything used is selected by default. What version of 9800GT are you using? Also are you using the DVI port? Tomorrow I will test update to 10.9.3 and I will answer you. Feel free to PM me at any time.

[martodim]

Hi,

 

I'm struggling with my own installation with a GeForce 9800GT. I had it working natively under SL 10.6.8 after a DSDT patch (nVidia 9800GT injection + PCI0 root set to 0). In Lion 10.7.5, ML 10.8.5 and Mav 10.9.0 I had to use NVEnabler64 to get the card to work (with some very minor graphics glitches in Mav).

 

No such luck since 10.9.2 and 10.9.3: I'm either just getting black screen when NVEnabler64 is not used and just getting the white/light gray screen with moving mouse pointer when NVEnabler64 is used. I only reach desktop by booting in safe mode. :-(

 

Could you indicate:

. which SMBIOS profile/plist you used?

. which FakeSMC version you have?

. which SMC version you use?

 

Ideally, if you could post the SMBIOS.plist + FakeSMC.kext and SystemProfiler's saved output, that'd be great!

Hi,

 

Here you are what you requested. Later I will update to 10.9.3. Sorry for writing here. It just seems I'm dumb enough not to be able to attach files on PM.

LSPCI .rtf

SMBios.txt

bootplist.txt

[martodim]

Yes I am working on 10.9.0. When I have time I will update to 10.9.3.

[jsl]

First AMD Hackintosh of mine

MB: Asus M3A

CPU: AMD Phenom x4 9850 BE

GPU: ATI Radeon 5770 with working HDMI audio and QE/CI

ATI SB600 chipset:

PATA: need patched AppleATIATA.kext (1.0.3) 

SATA: need patched AppleATIATALion.kext

 

Working Kernels for 10.7.5:

For arch=x86_64 -nossse3bit -f

1. legacy_kernel

2. mach_rc15

Bugs: (1) Unable to execute Firefox (Both menu and contents are invisible)

          (2) Unable to execute Luxmark 2.1, OpenCL OceanWave and Cinebench R15 Cinema 4D correctly

          (3) DVD Player.app error

          (4) OpenCL Ocean error

 

For arch=i386 -legacy -f

1. mach_amd (best for me up to now)

2. connactic

3. mach_rc15

Bugs: (1) in  mach_rc15: green glitch at Firefox Flash player

          (2) no such green glitch in both connactic and mach_amd

          (3) need Finder.app (10.7) in both connactic and mach_amd

          (4) DVD Player.app error

          (5) Luxmark 2.1& OpenCL OceanWave  all get errors

 

Working kernel at 10.9 GM, 10.9.1 and 10.9.3/10.9.4

mach_kernel.rc6fix & mach_kernel.rc7fix

(1) no more need boot with -f after rename boot kernel to mach_kernel and create system cache with kext utility (2.5.6)

(2) no or minimal green glitch at Firefox Flash player

(3) Luxmark 2.1, OpenCL OceanWave and Cinebench R15 Cinema 4D all work correctly

(4) Original Finder.app (10.9.x) working perfectly

 

Working kernel at 10.8.5

mach_kernel.rc5 & mach_kernel.sin

(1) need boot with -f

(2) minor red or green glitch at Firefox Flash player

(3) mach_kernel.sin always disable HDMI audio from ATI Radeon 5770 (HDMIAudio.kext)

(4) Luxmark 2.1, OpenCL OceanWave and Cinebench R15 Cinema 4D all work correctly

(5) Finder.app (10.8.3) working

 

Second AMD Hackintosh of mine

MB: Asus M4A78 Plus

CPU: AMD Athlon 64 x2 6000+

GPU: ATI Radeon 5770 with working HDMI audio and QE/CI

ATI SB700 chipset:

PATA: need patched AppleATIATA.kext (1.0.3) 

SATA: need patched AppleATIATALion.kext

 

In 10.7.5, 10.8.5, 10.9 GM, 10.9.1 and 10.9.3 all get similar results as the first system shown the above.

[Fahmi Rahman]

phenom,athlon,phenom, Gigabyte, phenom, phenom, athlon, phenom, "FX", phenom phenom athlon.............................

 

Anyone got something close  on A 6-3400M series?

[spakk]

phenom,athlon,phenom, Gigabyte, phenom, phenom, athlon, phenom, "FX", phenom phenom athlon.............................

Anyone got something close on A 6-3400M series?

What problems do you have?

How can we help you ...?

[Andycore]

Motherboard: AsRock 990FX Fatal1ty Professional

Chipset: NB: 990 SB: 950

CPU: AMD Phenom II 960T X4 Black Edition (Unlocked to X6 1605T)

GPU: Gigabyte GeForce GTX 760OC 2GB (Worked out of the box with stock nVidia kexts and GraphicsEnabler=No. Full QE/CI, driving three monitors at 1680x1050)

RAM: Kingston DDR3-1333 16GB (4 x 4GB)

Network: Broadcom BCM55781 (Found here but only functions on 10.9.0, device detected but doesn't work on 10.9.3 or 10.9.4)

Audio: Realtek ALC892 - Works with a very specific VoodooHDA without crackling/hissing (I have about 5 I've tried and honestly don't remember which one it was to link it, but can supply it if needed -- currently working on getting analog 5.1 working)

 

OS X: Mavericks 10.9.0 (Capable of 10.9.4 but lose ethernet, so holding off until newer kexts / I jump ship to Intel) 

Kernel: "Niresh" default amd64 (Also Tested: "mckay_kernel" and kexts, worked perfectly with myHack)

Boot flags: npci=0x2000 dmar=0 GraphicsEnabler=No

Bootloader:  Chameleon 2.2.1

 

[ghost9685]

CPU: AMD FX 6100 @ 3.1Ghz
Motherboard: Asus M5A88-M
RAM: 8GB DDR3( 4 + 4) 1333Mhz
SATA: 2 HDD ,  500 GB MAC OS Lion , 1 TB Running Windows 7
GPU: AMD Radeon HD 6770

 

 used the boot flag for booting installer--------->    -v npci=0x2000 GraphicsEnaber=NO

 

 

Successfull installaion and to boot the OS and get the Desktop i did below.

 

Deleted all Intel and GEForce kexts using Transmac

 

and booted with

 

-v PCIRootUID=1 npci=0x2000

 

of course i used the patched AMD kernel by bronzovka

[Savva_Mitrofanov]

ASUS M3N78-EH:

South Bridge: MCP78S similar  to MCP79 which used in MacMini 3,1 so i set smbios to Mac mini 3,1 and many devices work oob after editing dsdt

Audio : ALC883 - using patched by my hand AppleHDA

LPC : dsdt patched

smbus : dsdt patched

rtc,,ipic,hpet : dsdt patched and renamed

usb : dsdt patched , using vanilla kext, i spend a lot of time to solve sleep issues on this stuff , chines leaked data sheets help me in this 

Sleep : working perfectly

Wake-On-Lan : working perfectly

all monitor and other garbage like ps/2 cleaned from dsdt

CPU AMD Athlon 64 X2 5000+ - VoodooTSCSyncAMD to solve lags

cool & quite : working via editing p-states in ssdt and using p-state changer, however i don't use them

Video: NVIDIA Geforce 9800 gt working oob , just edited dsdt

Sata: patched as intel ich6 in dsdt, mcp 79 don't work cause it completely different ahci chip from 78s

Bootloader : Clover

Ethernet : Nvidia nforce lan - works well with nforcelan kext , but no wol , so i  disabled onboard lan and bought new nic

RTL8169(SC) - slice's kext works fine

Kernel and OS version: not matter , i'm sitting on current working system from snow leopard , just changing kernel's and updating os, now i'm on 10.9.5

and using bronya's rc2 kernel based on 10.9.4 sources

So in conclusion , i just use 3 non-apple kext's : voodootscsyncamd , applertl8169ethernet, fakesmc

[dodo]

I'm running 10.8.5

 

CPU: AMD FX-8120

Motherboard: Gigabyte 990FXA-UD3 rev1.1 

RAM: 2x 8GB

SATA: 128GB SDD + 1.5TB HDD + 165GB HDD

GPU: Gigabyte GT610

LAN: onboard Realtek RTL8111e (using this driver)

Audio: onboard Realtek ALC889 (using this driver)

 

The only other kext files I needed are FakeSMB and NullCPUPowerManagement.

 

using MacPro 5.1 template for smbios.plist (using Chamelion Wizard)

 

using GraphicsEnabler=yes npci=0200 for kernel flags

 

 

What kernel do you have?