Guest Posted October 17, 2020 Share Posted October 17, 2020 (edited) @iCanarois using an X570 platform, me a trx40 one Kernel patches are the same I use in Opencore to boot I have only renamed some voices to match with latest experimental AMD clover patches.. and it works If it does not work for you it could depend from some quirks or kext you are using.. I am asking if possible to uniform patches method which boot loader use to name them and to have the same terminology of Opencore kernel patch section And this in my case to have the chance to boot with only a config.plist all OSX available (as I do with Opencore) from High Sierra to Big Sur now I have to use two different config.plist (1 for highSierra, Mojave and Catalina_and one different for BigSur Edited October 17, 2020 by Guest Link to comment Share on other sites More sharing options...
naiclub Posted October 17, 2020 Share Posted October 17, 2020 (edited) 2 hours ago, Slice said: Do with me Reveal hidden contents log 101:278 0:081 DSDT found in Clover volume OEM folder: \EFI\CLOVER\ACPI\patched\\DSDT-4.aml 101:416 0:138 Output DSDT before patch to \EFI\CLOVER\ACPI\origin\DSDT-or.aml 101:924 0:507 Apply DsdtFixMask=0x179521DD And then I compare this special DSDT with that is loaded into system. Hello, I want to say that it is now successful. Thank you very much Spoiler Edited October 17, 2020 by naiclub 1 Link to comment Share on other sites More sharing options...
Mr MagOO Posted October 17, 2020 Share Posted October 17, 2020 (edited) Hello, my (very) old system switched from 5122 to 5125 with NO problem at all on Catalina. Thank you devs ! Edited October 17, 2020 by Mr MagOO 3 1 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted October 17, 2020 Share Posted October 17, 2020 6 hours ago, Jief_Machak said: I'm currently trying to improv and fix DSDT and log problems. I can't reproduce them here, that's why it's a bit difficult. Try this : CloverX64-2020-10-17-14-37-46-aee426f-dirty--jief.zip Could you try the EFI file form the previous post ? It won't fix the problem this time, but will give me some more information. Take a picture like you did of the message. Thanks very much will try it when I return to home Link to comment Share on other sites More sharing options...
Sphinx777 Posted October 17, 2020 Share Posted October 17, 2020 I ran tests all afternoon to find out what was going on with Clover versions 5124 and 5125 that caused the system to freeze on my Z370n Wifi during startup. 1. For the reason that Clover does not install correctly on the EFI but on the Catalina partition we usually just upgrade the new Cloverx64 file. 2. If only the Cloverx64 file is exchanged on the EFI (but not all Clover files inside Library and USR on partition) WILL NOT WORKS if do not have BOOTX64.efi from the old version running. 3. If we delete all files from EFI, Partition and files from Hidden Folders, installing everything MANUALLY from Clover-5125-x64.iso.7z files will work correctly. Link to comment Share on other sites More sharing options...
PG7 Posted October 17, 2020 Share Posted October 17, 2020 first of all i will leave my thoughts to a friend who left and left us and to his friends and family ..... RIP ArturPT you will always be with us the longing you will feel but the Hackintosh community will never NUCA forget you .... ever ..... Artur Manuel Marques Simoes (ArturPT) I have the same problem that my HP Envy Recline 23-K030EF i5-4590T does not load the DSDT with both the Clover r5124 and r5125 already with the r5123 it loads without any problems! still without being able to boot directly from the disk where the Beta10 system is but it can be done by Preboot, something has improved so far I could not install it directly on any BigSur version now I can still do it with trapeze but without having to go through on another pc! I leave the debug so that the DEVs with time can check and make corrections or advise me something to test I will be here for that! Thank you all in advance! *google translate Spoiler Spoiler debug.log preboot.log 2 Link to comment Share on other sites More sharing options...
Jief_Machak Posted October 17, 2020 Share Posted October 17, 2020 8 minutes ago, PG7 said: both the Clover r5124 and r5125 There was some fixes. Wait for the next version, or try this efi file : CloverX64-2020-10-17-20-24-28-7098822-dirty-jief.zip Link to comment Share on other sites More sharing options...
MacKonsti Posted October 17, 2020 Share Posted October 17, 2020 (edited) Hi everyone, I made a bootable USB stick with Clover r5125 and my untouched, working config.plist from r5119 does not go past the first screen that looks like scrambled code. I am not using any special drivers, only: ApfsDriverLoader.efi and AptioMemoryFix.efi and FSInject.efi, with VirtualSMC.efi and HFSPlus.efi possibly not needed anymore for Catalina. Since I am not using OcQuirks.efi and load AptioMemoryFix.efi instead, why wouldn't Clover boot to Catalina beyond that first debug screen? Are there new parameters in config.plist needed now for r5125? The sample has A LOT of stuff that I am not sure if they are new or needed for Coffee Lake :-/ Your help is appreciated. No OpenCore traces in EFI partition obviously, just Clover. Moreover @Slice in the zip package of the r5125 release (https://github.com/CloverHackyColor/CloverBootloader/releases/tag/5125) there was OcRuntime in "Off" folder but no "OcQuirks.efi" file anywhere. Is it integrated in the code or missing file? The release notes didn't mention a merge of OcQuirks in the main file. Thanks! Edited October 17, 2020 by MacKonsti Link to comment Share on other sites More sharing options...
MICKHAEL Posted October 17, 2020 Share Posted October 17, 2020 (edited) 8 minutes ago, MacKonsti said: Hi everyone, I made a bootable USB stick with Clover r5125 and my untouched, working config.plist from r5119 does not go past the first screen that looks like scrambled code. I am not using any special drivers, only: ApfsDriverLoader.efi and AptioMemoryFix.efi and FSInject.efi, with VirtualSMC.efi and HFSPlus.efi possibly not needed anymore for Catalina. Since I am not using OcQuirks.efi and load AptioMemoryFix.efi instead, why wouldn't Clover boot to Catalina beyond that first debug screen? Are there new parameters in config.plist needed now for r5125? The sample has A LOT of stuff that I am not sure if they are new or needed for Coffee Lake :-/ Your help is appreciated. No OpenCore traces in EFI partition obviously, just Clover. Moreover @Slice in the zip package of the r5125 release (https://github.com/CloverHackyColor/CloverBootloader/releases/tag/5125) there was OcRuntime in "Off" folder but no "OcQuirks.efi" file anywhere. Is it integrated in the code or missing file? The release notes didn't mention a merge of OcQuirks in the main file. Thanks! hi, AptioMemoryFix.efi are depreciated and we are moving to OcQuirks.efi and yes, OcQuirks are not missing, already are integrated check Dortania for Quirks settings for Coffee Lake Edited October 17, 2020 by MICKHAEL 3 Link to comment Share on other sites More sharing options...
PG7 Posted October 17, 2020 Share Posted October 17, 2020 1 hour ago, Jief_Machak said: Il y a eu quelques corrections. Attendez la prochaine version ou essayez ce fichier efi : CloverX64-2020-10-17-20-24-28-7098822-dirty-jief.zip Thanks Jief_Machak for the response and advice, I followed the test with your last file but the result is: after booting it has a black pc screen with an illuminated background but it doesn't even reach the Clover menu and there is no error message or kernel panic in any case I thank you for your work as well as Slice among others who work for the community! I personally prefer Clover to other Bootloaders and if I can help of course I do grateful for the efforts but spend what I know! *Google Translate ! Link to comment Share on other sites More sharing options...
Jief_Machak Posted October 17, 2020 Share Posted October 17, 2020 @PG7Activate debug is Boot section. You should have a debug.log in misc folder. Send it to me. Link to comment Share on other sites More sharing options...
JorgeMax Posted October 17, 2020 Share Posted October 17, 2020 2 hours ago, Jief_Machak said: There was some fixes. Wait for the next version, or try this efi file : CloverX64-2020-10-17-20-24-28-7098822-dirty-jief.zip This is happening: Spoiler Link to comment Share on other sites More sharing options...
Jief_Machak Posted October 17, 2020 Share Posted October 17, 2020 3 minutes ago, JorgeMax said: CloverX64-2020-10-17-20-24-28-7098822-dirty-jief.zip I think this is not the version you are trying. Check the debug.log. Copy this https://github.com/jief666/BootloaderChooser/releases/tag/0.3 in your EFI partition in EFI/BOOT. It'll save you this headache of "where should I copy CloverX64.efi?" 1 Link to comment Share on other sites More sharing options...
JorgeMax Posted October 17, 2020 Share Posted October 17, 2020 (edited) 1 hour ago, Jief_Machak said: I think this is not the version you are trying. Check the debug.log. Copy this https://github.com/jief666/BootloaderChooser/releases/tag/0.3 in your EFI partition in EFI/BOOT. It'll save you this headache of "where should I copy CloverX64.efi?" I'm using another partition with Clover in tests I renamed your file to "CLOVERX64.efi" (EFI / CLOVER) and also as "BOOTX64.efi" (EFI / BOOT) I put your "bootLoaderChooser" Good news is that the DSDT has been loaded again: Spoiler The bad that my processor is not recognized: Spoiler White debug file Thank you @Jief_Machak Edited October 17, 2020 by JorgeMax Link to comment Share on other sites More sharing options...
PG7 Posted October 17, 2020 Share Posted October 17, 2020 27 minutes ago, Jief_Machak said: @ PG7Activer le débogage est la section Boot. Vous devriez avoir un debug.log dans le dossier misc. Envoie le moi. Debug is empty I don't know why as i said with this file i don't have any graphical interface just stay with black screen! anything else you can test just let me know that I test. I oblige your spouse to help debug.log 1 Link to comment Share on other sites More sharing options...
JorgeMax Posted October 18, 2020 Share Posted October 18, 2020 I opened the Clover Configurator and generated the log file: bootlog.txt @Jief_MachakI don't know if this is the log file you want to analyze Thank you Link to comment Share on other sites More sharing options...
SavageAUS Posted October 18, 2020 Share Posted October 18, 2020 Anyone have any luck with X570 Ryzen yet? Link to comment Share on other sites More sharing options...
jsl2000 Posted October 18, 2020 Share Posted October 18, 2020 (edited) 1 hour ago, SavageAUS said: Anyone have any luck with X570 Ryzen yet? iCanaro is the only one who can boot BS with X570. Edited October 18, 2020 by jsl2000 Link to comment Share on other sites More sharing options...
Slice Posted October 18, 2020 Share Posted October 18, 2020 5 hours ago, MacKonsti said: Hi everyone, I made a bootable USB stick with Clover r5125 and my untouched, working config.plist from r5119 does not go past the first screen that looks like scrambled code. I am not using any special drivers, only: ApfsDriverLoader.efi and AptioMemoryFix.efi and FSInject.efi, with VirtualSMC.efi and HFSPlus.efi possibly not needed anymore for Catalina. Since I am not using OcQuirks.efi and load AptioMemoryFix.efi instead, why wouldn't Clover boot to Catalina beyond that first debug screen? Are there new parameters in config.plist needed now for r5125? The sample has A LOT of stuff that I am not sure if they are new or needed for Coffee Lake :-/ Your help is appreciated. No OpenCore traces in EFI partition obviously, just Clover. Moreover @Slice in the zip package of the r5125 release (https://github.com/CloverHackyColor/CloverBootloader/releases/tag/5125) there was OcRuntime in "Off" folder but no "OcQuirks.efi" file anywhere. Is it integrated in the code or missing file? The release notes didn't mention a merge of OcQuirks in the main file. Thanks! Release package is not good yet. It must be revised. OcQuirks.efi is no more used. AptioMemoryFix.efi is blocked even if you manually placed it. OpenRuntime.efi must be present. 1 2 Link to comment Share on other sites More sharing options...
naiclub Posted October 18, 2020 Share Posted October 18, 2020 (edited) 9 hours ago, PG7 said: first of all i will leave my thoughts to a friend who left and left us and to his friends and family ..... RIP ArturPT you will always be with us the longing you will feel but the Hackintosh community will never NUCA forget you .... ever ..... Artur Manuel Marques Simoes (ArturPT) I have the same problem that my HP Envy Recline 23-K030EF i5-4590T does not load the DSDT with both the Clover r5124 and r5125 already with the r5123 it loads without any problems! still without being able to boot directly from the disk where the Beta10 system is but it can be done by Preboot, something has improved so far I could not install it directly on any BigSur version now I can still do it with trapeze but without having to go through on another pc! I leave the debug so that the DEVs with time can check and make corrections or advise me something to test I will be here for that! Thank you all in advance! *google translate Hide contents Hide contents debug.log preboot.log It is the same with me 7 hours ago, MICKHAEL said: hi, AptioMemoryFix.efi are depreciated and we are moving to OcQuirks.efi and yes, OcQuirks are not missing, already are integrated check Dortania for Quirks settings for Coffee Lake This new version of Clover Can you use it completely? There is still more recent than me.Clover_r5125.pkg Edited October 18, 2020 by naiclub 1 Link to comment Share on other sites More sharing options...
LockDown Posted October 18, 2020 Share Posted October 18, 2020 How to fix this Link to comment Share on other sites More sharing options...
naiclub Posted October 18, 2020 Share Posted October 18, 2020 6 minutes ago, ellaosx said: How to fix this Your SSDT is not loading properly. 1 1 Link to comment Share on other sites More sharing options...
rramon Posted October 18, 2020 Share Posted October 18, 2020 @Sphinx777 Would you please share your working EFI folder for your Z370N Wifi unit? Also, if I understand correctly one must install r5125 files manually. How did you do this exactly? I would use Pacifist for that and swap files one at a time. Thanks in advance! Link to comment Share on other sites More sharing options...
kushwavez Posted October 18, 2020 Share Posted October 18, 2020 3 minutes ago, rramon said: @Sphinx777 Would you please share your working EFI folder for your Z370N Wifi unit? Also, if I understand correctly one must install r5125 files manually. How did you do this exactly? I would use Pacifist for that and swap files one at a time. Thanks in advance! Use the zip Link to comment Share on other sites More sharing options...
Jief_Machak Posted October 18, 2020 Share Posted October 18, 2020 For people with debug.log not generated (Sorry I'm struggling on this one!), try this : CloverX64-259ebbb-jief.zip Also, I'd like to share a tool I've just made : CloverConfigPlistValidator0.2 A lot of problem happens when you think you change something in config.plist, but you don't know it's silently ignored by Clover. Use a terminal, launch "CloverConfigPlistValidator0.2 {path to a config.plist}". For "{path to a config.plist}", you can just drag and drop from finder. It's brand new. It's possible that an error or warning is wrongly reported. Let me know. 3 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts