Jump to content

Clover General discussion


ErmaC
30,171 posts in this topic

Recommended Posts

1 hour ago, mifjpn said:


It boots Big Sur Beta 10 perfectly. (However, I have to choose the preboot entry)
Is this preboot entry issue a beta 10 issue?
 

I did a reinstallation with the full installer and I didn't get this problem, I boot from my BigSur Beta 10 partition without any problems.

  • Thanks 1
Link to comment
Share on other sites

I can't boot with 5125.  As soon as I get past the Clover menu page, I get a black screen and no activity.  The boot process does not commence.  5124 worked fine and I could boot Catalina and, using the preboot partition, I could boot BS Beta 10.

Link to comment
Share on other sites

hi 

I have some problems using last clover revision  5125

using usb flash memory to boot clover Mac OS Catalina boots but with no battery indicator no audio no touchpad

here is my new clover floder

CLOVER.zip

here is clover boot log

Spoiler

0:100  0:100  MemLog inited, TSC freq: 2593990616
0:100  0:000  CPU was calibrated with ACPI PM Timer
0:100  0:000  CloverX64 : Image base = 0xB4DD7000
0:100  0:000  
0:100  0:000  Now is 16.10.2020,  19:47:04 (GMT)
0:100  0:000  Starting Clover revision: 5125 (master, commit aee426fa3) on American Megatrends EFI
0:100  0:000  Build id: Clover build id: 20201016100620-aee426f-5125
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -D LESS_DEBUG -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED -D LESS_DEBUG --conf=/Users/sergey/src/CloverBootloader/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6]
0:100  0:000  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:101  0:001  SelfDirPath = \EFI\CLOVER
0:102  0:001  SimpleTextEx Status=Success
0:102  0:000  === [ GetDefaultSettings ] ======================
0:102  0:000  === [ Get Smbios ] ==============================
0:102  0:000  Type 16 Index = 0
0:102  0:000  Total Memory Slots Count = 4
0:102  0:000  Type 17 Index = 0
0:102  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:102  0:000  SmbiosTable.Type17->Size = 4096MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:102  0:000  SmbiosTable.Type17->Vendor = Micron
0:102  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:102  0:000  SmbiosTable.Type17->PartNumber =                   
0:102  0:000  Type 17 Index = 1
0:102  0:000  Ignoring insane frequency value 0MHz
0:102  0:000  Type 17 Index = 2
0:102  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:102  0:000  SmbiosTable.Type17->Size = 4096MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:102  0:000  SmbiosTable.Type17->Vendor = Samsung
0:102  0:000  SmbiosTable.Type17->SerialNumber = 18122CB1
0:102  0:000  SmbiosTable.Type17->PartNumber = M471B5173DB0-YK0  
0:102  0:000  Type 17 Index = 3
0:102  0:000  Ignoring insane frequency value 0MHz
0:102  0:000  Boot status=0
0:102  0:000  Running on: 'TP500LNG' with board 'TP500LNG'
0:102  0:000  === [ GetCPUProperties ] ========================
0:102  0:000  CPU Vendor = 756E6547 Model=40651
0:102  0:000   The CPU supported SSE4.1
0:102  0:000  BrandString = Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz
0:102  0:000   The CPU supported turbo
0:102  0:000  MSR 0x35               20004
0:102  0:000  MSR 0xE2 before patch 1E008408
0:102  0:000  MSR 0xE2 is locked, PM patches will be turned on
0:102  0:000  MSR 0xCE              0008083D_F3011A00
0:102  0:000  corrected FLEX_RATIO = 0
0:102  0:000  MSR 0x1B0             00000000
0:102  0:000  FSBFrequency = 77 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:102  0:000  MaxDiv/MinDiv: 26.0/8
0:102  0:000  Turbo: 28/28/28/31
0:102  0:000  Features: 0x77DAFBBFBFEBFBFF
0:102  0:000  Threads: 4
0:102  0:000  Cores: 2
0:102  0:000  FSB: 100 MHz
0:102  0:000  CPU: 2000 MHz
0:102  0:000  TSC: 2000 MHz
0:102  0:000  PIS: 100 MHz
0:102  0:000  ExternalClock: 25 MHz
0:102  0:000  === [ GetDevices ] ==============================
0:102  0:000  GOP found at: PciRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100)
0:102  0:000  PCI (00|00:00.00) : 8086 0A04 class=060000
0:102  0:000  PCI (00|00:02.00) : 8086 0A16 class=030000
0:102  0:000   - GOP: Provided by device
0:102  0:000   - GFX: Model=Intel HD Graphics 4400 (Intel)
0:102  0:000  PCI (00|00:03.00) : 8086 0A0C class=040300
0:102  0:000  PCI (00|00:14.00) : 8086 9C31 class=0C0330
0:102  0:000  PCI (00|00:16.00) : 8086 9C3A class=078000
0:102  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:102  0:000  PCI (00|00:1B.00) : 8086 9C20 class=040300
0:102  0:000  PCI (00|00:1C.00) : 8086 9C10 class=060400
0:102  0:000  PCI (00|00:1C.02) : 8086 9C14 class=060400
0:102  0:000  PCI (00|02:00.00) : 10EC 5287 class=FF0000
0:102  0:000  PCI (00|02:00.01) : 10EC 8168 class=020000
0:102  0:000   - LAN: 0 Vendor=Realtek
0:102  0:000  PCI (00|00:1C.03) : 8086 9C16 class=060400
0:102  0:000  PCI (00|03:00.00) : 14E4 43A0 class=028000
0:102  0:000   - WIFI: Vendor= Broadcom
0:102  0:000  PCI (00|00:1C.04) : 8086 9C18 class=060400
0:102  0:000  PCI (00|04:00.00) : 10DE 1341 class=030200
0:102  0:000  PCI (00|00:1D.00) : 8086 9C26 class=0C0320
0:102  0:000  PCI (00|00:1F.00) : 8086 9C43 class=060100
0:102  0:000  PCI (00|00:1F.02) : 8086 9C03 class=010601
0:102  0:000  PCI (00|00:1F.03) : 8086 9C22 class=0C0500
0:102  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:102  0:000  Clover load options size = 4 bytes
0:106  0:003  _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG--00-00-00-00-00-00'. Dir doesn't exist.
0:106  0:000  _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG\UEFI'. Dir doesn't exist.
0:106  0:000  _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG'. Dir doesn't exist.
0:106  0:000  _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG-2000'. Dir doesn't exist.
0:106  0:000  _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG'. Dir doesn't exist.
0:106  0:000  _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG-2000'. Dir doesn't exist.
0:106  0:000  set OEMPath to "."
0:106  0:000  Oem dir = \EFI\CLOVER
0:106  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:109  0:003  Using config.plist at path: \EFI\CLOVER
0:109  0:000  \EFI\CLOVER\config.plist  loaded: Success
0:109  0:000  === [ GetListOfThemes ] =========================
0:112  0:002  - [00]: RANDOM
0:116  0:003  - [00]: EMBEDDED
0:119  0:003  - [00]: Glassy
0:123  0:003  === [ Found config plists ] =====================
0:123  0:000  - config.plist
0:123  0:000  === [ GetEarlyUserSettings ] ====================
0:123  0:000  timeout set to 5
0:123  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:123  0:000   get BlueValue=1.200000
0:123  0:000  Default theme: Glassy
0:123  0:000  Hiding entries with string Windows
0:123  0:000  Hiding entries with string HD3
0:123  0:000  Hiding entries with string Recovery
0:123  0:000  Hiding entries with string Preboot
0:123  0:000  Hiding entries with string HD1
0:123  0:000  Hiding entries with string HD4
0:123  0:000  === [ LoadDrivers ] =============================
0:127  0:003  Loading FSInject.efi  status=Success
0:130  0:003  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:131  0:001  SelfDirPath = \EFI\CLOVER
0:131  0:000  Oem dir = \EFI\CLOVER
0:131  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:131  0:000  Loading HFSPlus.efi  status=Success
0:135  0:004  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:137  0:001  SelfDirPath = \EFI\CLOVER
0:137  0:000  Oem dir = \EFI\CLOVER
0:137  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:137  0:000   - driver needs connecting
0:137  0:000  Loading OsxFatBinaryDrv.efi  status=Success
0:139  0:002  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:140  0:001  SelfDirPath = \EFI\CLOVER
0:140  0:000  Oem dir = \EFI\CLOVER
0:140  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:140  0:000  Loading CsmVideoDxe.efi  status=Success
0:144  0:003  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:145  0:001  SelfDirPath = \EFI\CLOVER
0:145  0:000  Oem dir = \EFI\CLOVER
0:145  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:145  0:000   - driver needs connecting
0:145  0:000  Loading VirtualSmc.efi  status=Success
0:249  0:103  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:250  0:001  SelfDirPath = \EFI\CLOVER
0:250  0:000  Oem dir = \EFI\CLOVER
0:250  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:250  0:000  Loading DataHubDxe.efi  status=Success
0:258  0:008  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:259  0:001  SelfDirPath = \EFI\CLOVER
0:259  0:000  Oem dir = \EFI\CLOVER
0:259  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:259  0:000  Loading PartitionDxe.efi  status=Success
0:263  0:004  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:264  0:001  SelfDirPath = \EFI\CLOVER
0:264  0:000  Oem dir = \EFI\CLOVER
0:264  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:264  0:000   - driver needs connecting
0:264  0:000  Loading ApfsDriverLoader.efi  status=Success
0:267  0:002  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:268  0:001  SelfDirPath = \EFI\CLOVER
0:268  0:000  Oem dir = \EFI\CLOVER
0:268  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:268  0:000   - driver needs connecting
0:268  0:000  Loading AudioDxe.efi  status=Success
0:273  0:005  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
0:274  0:001  SelfDirPath = \EFI\CLOVER
0:274  0:000  Oem dir = \EFI\CLOVER
0:274  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
0:274  0:000   - driver needs connecting
0:274  0:000  5 drivers needs connecting ...
0:274  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:274  0:000  Partition driver loaded: 
0:274  0:000  HFS+ driver loaded
0:274  0:000  Video driver loaded: disconnect Success
0:390  0:115  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:390  0:000  1
0:403  0:013  CsmVideoDriverBindingStart
0:403  0:000  mixed support=40010
0:403  0:000  Controller is [030000]
0:403  0:000  Check for VBE
0:409  0:006   found Detail Timing 1920x1080
0:409  0:000  timing string after 0xFE:AUO
         
0:409  0:000  timing string after 0xFE:B156HTN03.6 

0:409  0:000    0 1280x1024 attr=9B - ok, edid-
0:409  0:000    1 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=1
0:410  0:000    2 640x480 attr=9B - ok, edid-, 640x480, working
0:410  0:000    3 800x600 attr=9B - ok, edid-, 800x600, working
0:410  0:000    4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4
0:410  0:000  CsmVideo: New mode: 4 1920x1080 - set
0:622  0:212   - SetMode pref 4 (4) = Success
0:622  0:000  CsmVideoCheckForVbe - Success
0:622  0:000  CsmVideoDriverBindingStart end Success
0:622  0:000  CsmVideo: New mode: 3 800x600 - blocking that switch
0:623  0:000  CsmVideo: New mode: 1 1024x768 - blocking that switch
4:496  3:873  CsmVideoDriverBindingStart
4:496  0:000  Enable the device status=Unsupported
4:496  0:000  attributes Restored
4:496  0:000  CsmVideoDriverBindingStart end Unsupported
4:773  0:276  === [ InitScreen ] ==============================
4:773  0:000  Console modes reported: 3, available modes:
4:773  0:000   - [01]: 80x25
4:773  0:000   - [03]: 100x31 (current mode)
4:773  0:000  SetScreenResolution: 1920x1080 - already set
4:773  0:000  SetScreenResolution: 1920x1080 - already set
4:773  0:000  self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298
4:774  0:001  SelfDirPath = \EFI\CLOVER
4:774  0:000  Oem dir = \EFI\CLOVER
4:774  0:000  Kexts dir = '\EFI\CLOVER\Kexts'
4:776  0:002  === [ GetMacAddress ] ===========================
4:776  0:000  === [ ScanSPD ] =================================
4:777  0:000  Scanning SMBus [8086:9C22], mmio: 0xF7C19004, ioport: 0xF040, hostc: 0x11
4:795  0:018  Slot: 2 Type 24 4096MB 1600MHz Vendor=Samsung PartNo=M471B5173DB0-YK0 SerialNo=18122CB1
4:796  0:000  === [ GetAcpiTablesList ] =======================
4:796  0:000  Get Acpi Tables List from RSDT:
4:796  0:000   - [00]: FACP  Notebook len=268
4:796  0:000   - [01]: APIC  Notebook len=114
4:796  0:000   - [02]: FPDT  Notebook len=68
4:796  0:000   - [03]: ECDT  Notebook len=193
4:796  0:000   - [04]: LPIT   len=148
4:796  0:000   - [05]: SSDT  Cpu0Ist len=1337
4:796  0:000   - [06]: SSDT  CpuPm len=2776
4:796  0:000   - [07]: MCFG  Notebook len=60
4:796  0:000   - [08]: HPET  Notebook len=56
4:796  0:000   - [09]: SSDT  SataTabl len=727
4:796  0:000   - [10]: SSDT  SaSsdt  len=16161
4:796  0:000   - [11]: SSDT  SgPch len=3533
4:796  0:000   - [12]: SSDT  OptTabl len=6637
4:796  0:000   - [13]: MSDM  Notebook len=85
4:796  0:000  Calibrated TSC Frequency = 2593990616 = 2593MHz
4:797  0:000  === [ GetUserSettings ] =========================
4:797  0:000  Add 1 devices (kTagTypeDict):
4:797  0:000  USB FixOwnership: no
4:797  0:000   - final DSDT Fix mask=00000000
4:797  0:000  Using ProductName from config: MacBookPro11,2
4:797  0:000  Using latest BiosVersion from config
4:797  0:000  BiosVersion: MBP112.88Z.F000.B00.1907241257
4:797  0:000  BiosReleaseDate: 07/24/2019
4:797  0:000  Using EfiVersion from clover: 160.0.0.0.0
4:797  0:000  Using FirmwareFeatures from config: 0xE80FE137
4:797  0:000  Using FirmwareFeaturesMask from config: 0xFF1FFF3F
4:797  0:000  Board-ID set from config as Mac-3CBD00234E554E41
4:797  0:000  BoardType: 0xA
4:797  0:000  ChassisType: 0xA
4:797  0:000  Cannot find smbios.plist at path: '\EFI\CLOVER', trying '\EFI\CLOVER'
4:797  0:000  Cannot find smbios.plist at path: '\EFI\CLOVER'
4:801  0:003  === [ Found DSDT tables ] =======================
4:803  0:002  - DSDT.AML
4:815  0:011  Added Kext=Other\Lilu.kext
4:821  0:006  Added Kext=Other\BT4LEContinuityFixup.kext
4:827  0:006  Added Kext=Other\AirportBrcmFixup.kext
4:881  0:053  Added Kext=Other\AppleALC.kext
4:887  0:006  Added Kext=Other\WhateverGreen.kext
4:894  0:006  Added Kext=Other\SMCBatteryManager.kext
4:901  0:006  Added Kext=Other\RealtekRTL8111.kext
4:908  0:006  Added Kext=Other\SMCProcessor.kext
4:941  0:033  Added Kext=Other\USBInjectAll.kext
4:948  0:006  Added Kext=Other\AsusSMC.kext
4:954  0:006  Added Kext=Other\Sinetek-rtsx.kext
4:969  0:014  Added Kext=Other\BrcmBluetoothInjector.kext
4:982  0:013  Added Kext=Other\ApplePS2SmartTouchPad.kext
5:006  0:024  Added Kext=Other\VirtualSMC.kext
5:019  0:012  === [ ScanVolumes ] =============================
5:019  0:000  Found 15 volumes with blockIO
5:019  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)
5:020  0:001          Result of bootcode detection: bootable unknown (legacy)
5:020  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50)
5:021  0:001          Result of bootcode detection: bootable unknown (legacy)
5:694  0:672          This is SelfVolume !!
5:694  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)
5:699  0:005  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
5:701  0:001          Result of bootcode detection: bootable unknown (legacy)
5:701  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,DA737783-74DE-46C4-802A-37162A058CB9,0x28,0x64000)
5:702  0:000          Result of bootcode detection: bootable unknown (legacy)
5:702  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)
5:703  0:000          Result of bootcode detection: bootable unknown (legacy)
5:703  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,ECEA0BC4-484C-439A-A3AF-71CD8784C1A3,0xBB1E000,0x8000)
5:703  0:000          hiding this volume
5:703  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,A4B3851C-1F5E-46DE-8860-BA5ADE960803,0xBB26000,0xC83A000)
5:704  0:000          Result of bootcode detection: bootable Windows (vista,win)
5:704  0:000          hiding this volume
5:704  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(5,GPT,2907E3B8-6D3F-4426-84E6-A30E7A3D3B53,0x18360000,0x3BC4000)
5:705  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,MBR,0x404D1BB8,0x800,0x2CBA800)
5:705  0:000          Result of bootcode detection: bootable Windows (vista,win)
5:705  0:000          hiding this volume
5:705  0:000  - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A)
5:706  0:001          hiding this volume
5:706  0:000  - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,F7D9BCEB6E9FCA4AADA30BF461990721)
5:736  0:029  - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E9D94F9073D4004FB6A568F3365C1C30)
5:736  0:000          hiding this volume
5:736  0:000  - [13]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,2E616AE739EE224EB8F807A752759174)
5:737  0:000  - [14]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,8835C31F73E7374DBACB41C3662555CA)
5:748  0:011  found 2 handles with audio
5:748  0:000  No AudioIoDevice stored
5:748  0:000  no stored audio parameters
5:748  0:000  Found Audio Device Realtek ALC233 (Speaker) at index 0
5:748  0:000  Found Audio Device Realtek ALC233 (Headphones) at index 1
5:748  0:000  === [ InitXTheme ] ==============================
5:748  0:000  use Daylight theme
5:751  0:002  Using theme 'Glassy' (Glassy)
5:751  0:000  chosen theme Glassy
5:751  0:000  OS main and drive as badge
5:909  0:157  sound play end with status=Device Error
5:912  0:003  theme inited
5:912  0:000  Chosen theme Glassy
5:912  0:000  after NVRAM boot-args=
5:912  0:000  === [ Dump SMC keys from NVRAM ] ================
5:912  0:000  found AppleSMC protocol
5:916  0:004  === [ ScanLoader ] ==============================
5:916  0:000  - [01]: 'BOOT'
5:919  0:003       AddLoaderEntry for Volume Name=BOOT
5:920  0:000      IconName=unknown comma=-1 size=7
5:920  0:000      Full=unknown
5:920  0:000      Loader entry created for 'PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50)\EFI\BOOT\BOOTX64.efi'
5:920  0:000  - [04]: 'EFI'
5:920  0:000       AddLoaderEntry for Volume Name=EFI
5:920  0:000      IconName=vista,win comma=5 size=9
5:920  0:000      first=os_vista
5:920  0:000      Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,DA737783-74DE-46C4-802A-37162A058CB9,0x28,0x64000)\EFI\microsoft\Boot\bootmgfw.efi'
5:922  0:002    found entry ubuntu,linux
5:922  0:000       AddLoaderEntry for Volume Name=EFI
5:922  0:000      Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,DA737783-74DE-46C4-802A-37162A058CB9,0x28,0x64000)\EFI\UBUNTU\grubx64.efi'
5:923  0:000  - [10]: 'Preboot'
5:924  0:001       AddLoaderEntry for Volume Name=Preboot
5:924  0:000      Check if volume Is Hibernated:
5:924  0:000      Check sleep image 'by signature':
5:924  0:000      using default sleep image name = \private\var\vm\sleepimage
5:924  0:000      sleepimage not found -> Not Found
5:924  0:000      hibernated: no - sign
5:924  0:000      IconName=cata,mac comma=4 size=8
5:924  0:000      first=os_cata
5:925  0:000      Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A)\1FC33588-E773-4D37-BACB-41C3662555CA\System\Library\CoreServices\boot.efi'
5:925  0:000  - [11]: 'macOS - Data'
5:925  0:000  - [12]: 'Recovery'
5:926  0:000       AddLoaderEntry for Volume Name=Recovery
5:927  0:001      IconName=cata,mac comma=4 size=8
5:927  0:000      first=os_cata
5:927  0:000      Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E9D94F9073D4004FB6A568F3365C1C30)\1FC33588-E773-4D37-BACB-41C3662555CA\boot.efi'
5:928  0:000  - [13]: 'VM'
5:928  0:000  - [14]: 'macOS'
5:944  0:016       AddLoaderEntry for Volume Name=macOS
5:949  0:004      Check if volume Is Hibernated:
5:949  0:000      Check sleep image 'by signature':
5:949  0:000      using default sleep image name = \private\var\vm\sleepimage
5:949  0:000      sleepimage not found -> Not Found
5:949  0:000      hibernated: no - sign
5:949  0:000      IconName=cata,mac comma=4 size=8
5:949  0:000      first=os_cata
5:949  0:000      Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,8835C31F73E7374DBACB41C3662555CA)\System\Library\CoreServices\boot.efi'
5:950  0:000  Scanning legacy ...
5:950  0:000   hidden
5:950  0:000   hidden
5:950  0:000  === [ AddCustomTool ] ===========================
5:954  0:004  === [ GetEfiBootDeviceFromNvram ] ===============
5:954  0:000   - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A)\1FC33588-E773-4D37-BACB-41C3662555CA\System\Library\CoreServices\boot.efi
5:954  0:000    - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A)'
5:954  0:000    - LoaderPath: '\1FC33588-E773-4D37-BACB-41C3662555CA\System\Library\CoreServices\boot.efi'
5:954  0:000    - Guid = B4807145-196D-48D5-9D82-D7B10C27F04D
5:954  0:000  === [ FindStartupDiskVolume ] ===================
5:954  0:000    - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A)
5:954  0:000     - searching for that partition and loader '\1FC33588-E773-4D37-BACB-41C3662555CA\System\Library\CoreServices\boot.efi'
5:954  0:000      - [!] not found
5:954  0:000     - searching again, but comparing Media dev path nodes
5:954  0:000     - found entry 2. 'Boot macOS from macOS', Volume 'macOS', '\System\Library\CoreServices\boot.efi'
5:954  0:000  Boot redirected to Entry 2. 'Boot macOS from macOS'
5:954  0:000  BannerPlace at Clear Screen [916,264]
6:230  0:276  AnimeRun=0
6:416  0:186  GUI ready
15:046  8:629   get MainChosenEntry FlagsBits = 0x7
15:046  0:000   boot with args: 
20:327  5:280   get MainChosenEntry FlagsBits = 0x7
20:327  0:000   boot with args: 
20:327  0:000  BootVariable of the entry is empty
20:327  0:000  === [ StartLoader ] =============================
20:327  0:000  Finally: ExternalClock=25MHz BusSpeed=99769kHz CPUFreq=2594MHz PIS: hw.busfrequency=100000000Hz
20:327  0:000  Beginning OC
20:327  0:000  config-oc.plist isn't use at all
20:327  0:000  Bridge mmioWhiteList[0] to OC : comment=Haswell: SB_RCBA is a 0x4 page memory region, containing SPI_BASE at 0x3800 (SPI_BASE_ADDRESS)
20:327  0:000  Bridge mmioWhiteList[1] to OC : comment=Generic: PCI root is a 0x1000 page memory region used by some firmwares
20:327  0:000  UniOSVersion == 10.15.6
20:327  0:000  UniShortOSVersion == 10.15
20:327  0:000  AddKextsInArray from Other
20:327  0:000  ->Extra kext: Other\Lilu.kext (v.1.4.8)
20:327  0:000  ->Extra kext: Other\BT4LEContinuityFixup.kext (v.1.1.5)
20:327  0:000  ->Extra kext: Other\AirportBrcmFixup.kext (v.2.1.0)
20:327  0:000      |-- PlugIn kext: Other\AirportBrcmFixup.kext\Contents\PlugIns\AirPortBrcm4360_Injector.kext (v.1.0)
20:327  0:000      |-- PlugIn kext: Other\AirportBrcmFixup.kext\Contents\PlugIns\AirPortBrcmNIC_Injector.kext (v.1.0)
20:327  0:000  ->Extra kext: Other\AppleALC.kext (v.1.5.3)
20:327  0:000  ->Extra kext: Other\WhateverGreen.kext (v.1.4.3)
20:327  0:000  ->Extra kext: Other\SMCBatteryManager.kext (v.1.1.7)
20:327  0:000  ->Extra kext: Other\RealtekRTL8111.kext (v.2.3.0)
20:327  0:000  ->Extra kext: Other\SMCProcessor.kext (v.1.1.7)
20:327  0:000  ->Extra kext: Other\USBInjectAll.kext (v.0.7.5)
20:327  0:000  ->Extra kext: Other\AsusSMC.kext (v.1.4.1)
20:327  0:000  ->Extra kext: Other\Sinetek-rtsx.kext (v.7)
20:327  0:000  ->Extra kext: Other\BrcmBluetoothInjector.kext (v.2.5.5)
20:327  0:000  ->Extra kext: Other\ApplePS2SmartTouchPad.kext (v.4.6.8)
20:327  0:000      |-- PlugIn kext: Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Keyboard.kext (v.4.6.8)
20:327  0:000      |-- PlugIn kext: Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Controller.kext (v.4.6.8)
20:327  0:000  ->Extra kext: Other\VirtualSMC.kext (v.1.1.7)
20:327  0:000  AddKextsInArray from Off
20:327  0:000  AddKextsInArray from 10
20:327  0:000  AddKextsInArray from 10_normal
20:327  0:000  AddKextsInArray from 10.15
20:327  0:000  AddKextsInArray from 10.15_normal
20:327  0:000  AddKextsInArray from 10.15.6
20:327  0:000  AddKextsInArray from 10.15.6_normal
20:327  0:000  Bridge kext to OC : Path=Lilu.kext
20:327  0:000  info plist path: .\Kexts\Other\Lilu.kext\Contents\Info.plist
20:331  0:003  assign executable as 'Contents\MacOS\Lilu'
20:331  0:000  Bridge kext to OC : Path=VirtualSMC.kext
20:331  0:000  info plist path: .\Kexts\Other\VirtualSMC.kext\Contents\Info.plist
20:340  0:008  assign executable as 'Contents\MacOS\VirtualSMC'
20:340  0:000  Bridge kext to OC : Path=WhateverGreen.kext
20:340  0:000  info plist path: .\Kexts\Other\WhateverGreen.kext\Contents\Info.plist
20:344  0:004  assign executable as 'Contents\MacOS\WhateverGreen'
20:344  0:000  Bridge kext to OC : Path=AppleALC.kext
20:344  0:000  info plist path: .\Kexts\Other\AppleALC.kext\Contents\Info.plist
20:388  0:044  assign executable as 'Contents\MacOS\AppleALC'
20:388  0:000  Bridge kext to OC : Path=SMCProcessor.kext
20:388  0:000  info plist path: .\Kexts\Other\SMCProcessor.kext\Contents\Info.plist
20:392  0:004  assign executable as 'Contents\MacOS\SMCProcessor'
20:392  0:000  Bridge kext to OC : Path=BT4LEContinuityFixup.kext
20:392  0:000  info plist path: .\Kexts\Other\BT4LEContinuityFixup.kext\Contents\Info.plist
20:396  0:003  assign executable as 'Contents\MacOS\BT4LEContinuityFixup'
20:396  0:000  Bridge kext to OC : Path=AirportBrcmFixup.kext
20:396  0:000  info plist path: .\Kexts\Other\AirportBrcmFixup.kext\Contents\Info.plist
20:400  0:004  assign executable as 'Contents\MacOS\AirportBrcmFixup'
20:400  0:000  Bridge kext to OC : Path=AirPortBrcm4360_Injector.kext
20:400  0:000  info plist path: .\Kexts\Other\AirportBrcmFixup.kext\Contents\PlugIns\AirPortBrcm4360_Injector.kext\Contents\Info.plist
20:401  0:001  Bridge kext to OC : Path=AirPortBrcmNIC_Injector.kext
20:401  0:000  info plist path: .\Kexts\Other\AirportBrcmFixup.kext\Contents\PlugIns\AirPortBrcmNIC_Injector.kext\Contents\Info.plist
20:402  0:001  Bridge kext to OC : Path=SMCBatteryManager.kext
20:402  0:000  info plist path: .\Kexts\Other\SMCBatteryManager.kext\Contents\Info.plist
20:406  0:003  assign executable as 'Contents\MacOS\SMCBatteryManager'
20:406  0:000  Bridge kext to OC : Path=RealtekRTL8111.kext
20:406  0:000  info plist path: .\Kexts\Other\RealtekRTL8111.kext\Contents\Info.plist
20:410  0:003  assign executable as 'Contents\MacOS\RealtekRTL8111'
20:410  0:000  Bridge kext to OC : Path=USBInjectAll.kext
20:410  0:000  info plist path: .\Kexts\Other\USBInjectAll.kext\Contents\Info.plist
20:431  0:021  assign executable as 'Contents\MacOS\USBInjectAll'
20:431  0:000  Bridge kext to OC : Path=AsusSMC.kext
20:431  0:000  info plist path: .\Kexts\Other\AsusSMC.kext\Contents\Info.plist
20:435  0:004  assign executable as 'Contents\MacOS\AsusSMC'
20:435  0:000  Bridge kext to OC : Path=Sinetek-rtsx.kext
20:435  0:000  info plist path: .\Kexts\Other\Sinetek-rtsx.kext\Contents\Info.plist
20:439  0:003  assign executable as 'Contents\MacOS\Sinetek-rtsx'
20:439  0:000  Bridge kext to OC : Path=BrcmBluetoothInjector.kext
20:439  0:000  info plist path: .\Kexts\Other\BrcmBluetoothInjector.kext\Contents\Info.plist
20:444  0:004  Bridge kext to OC : Path=ApplePS2SmartTouchPad.kext
20:444  0:000  info plist path: .\Kexts\Other\ApplePS2SmartTouchPad.kext\Contents\Info.plist
20:451  0:007  assign executable as 'Contents\MacOS\ApplePS2SmartTouchPad'
20:451  0:000  Bridge kext to OC : Path=ApplePS2Keyboard.kext
20:451  0:000  info plist path: .\Kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Keyboard.kext\Contents\Info.plist
20:456  0:004  assign executable as 'Contents\MacOS\ApplePS2Keyboard'
20:456  0:000  Bridge kext to OC : Path=ApplePS2Controller.kext
20:456  0:000  info plist path: .\Kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Controller.kext\Contents\Info.plist
20:459  0:003  assign executable as 'Contents\MacOS\ApplePS2Controller'
20:460  0:001  OCST: Missing vault data, ignoring...
20:463  0:002  Load OpenRuntime.efi : Status Success
20:463  0:000  Start OpenRuntime.efi : Status Success
20:463  0:000  OC: OcMiscEarlyInit...
20:463  0:000  OC: Watchdog status is 1
20:463  0:000  OC: OpenCore DBG-061-2020-10-16 is loading in Optional mode (0/0)...
20:463  0:000  OC: Boot timestamp - 2020.10.16 19:47:25
20:463  0:000  OCCPU: MP services threads 4 (enabled 4) - Success
20:463  0:000  OCCPU: MP services Pkg 1 Cores 2 Threads 2 - Success
20:463  0:000  OCCPU: Found Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz
20:463  0:000  OCCPU: Signature 40651 Stepping 1 Model 45 Family 6 Type 0 ExtModel 4 ExtFamily 0 uCode 1C
20:463  0:000  OCCPU: EIST CFG Lock 1
20:463  0:000  OCCPU: Discovered CpuFamily 6 CpuModel 69 CpuStepping 1 CpuGeneration 6
20:463  0:000  OCCPU: Ratio Min 8 Max 26 Current 25 Turbo 31 28 28 28
20:564  0:100  TscFrequency 2593994023
20:564  0:000  OCCPU: Detected Apple Processor Type: 07 -> 0705
20:564  0:000  OCCPU: CPUFrequencyFromTSC  2593994023Hz  2593MHz
20:564  0:000  OCCPU: CPUFrequency  2593994023Hz  2593MHz
20:564  0:000  OCCPU: FSBFrequency    99769000Hz    99MHz
20:564  0:000  OCCPU: Pkg 1 Cores 2 Threads 4
20:564  0:000  OC: OcLoadNvramSupport...
20:564  0:000  OC: Current version is DBG-061-2020-10-16
20:564  0:000  OC: OcMiscMiddleInit...
20:564  0:000  OC: LoadHandle 0 with BootProtect in  mode - Unsupported
20:564  0:000  OC: OcLoadUefiSupport...
20:564  0:000  OcAppleEventInstallProtocol
20:564  0:000  InternalCreateQueueEvent
20:564  0:000  EventCreateSimplePointerInstallNotifyEvent
20:564  0:000  InternalSimplePointerInstallNotifyFunction
20:564  0:000  InternalRegisterSimplePointerInterface
20:564  0:000  InternalRegisterSimplePointerInterface
20:564  0:000  InternalRegisterSimplePointerInterface
20:564  0:000  OcOSInfoInstallProtocol
20:564  0:000  OCRTC: OcAppleRtcRamInstallProtocol
20:564  0:000  OCRTC: Wake log is 0x00 0x00   0 0x00
20:564  0:000  OcAppleFbInfoInstallProtocol
20:564  0:000  OC: Loading Apple Secure Boot with Disabled (level 0)
20:565  0:000  OCABC: RTDFRG 1 DEVMMIO 0 NOSU 0 NOVRWR 0 NOSB 0 NOHBMAP 0 SMSLIDE 1 WRUNPROT 1
20:565  0:000  OCABC: FEXITBS 0 PRMRG 0 CSLIDE 0 MSLIDE 0 PRSRV 0 RBMAP 0 VMAP 1 APPLOS 0 RTPERMS 1
20:565  0:000  OCABC: Got rendezvous with OpenRuntime r11
20:565  0:000  OCABC: MAT support is 0
20:565  0:000  OC: RBVR 0 DDBR 0
20:565  0:000  OC: Got 0 drivers
20:565  0:000  OCC: Installing GOP (Unsupported) on ConsoleOutHandle...
20:565  0:000  OC: Requested resolution is 1920x1080@0 (max: 0) from 1920x1080
20:565  0:000  OCC: Requesting 1920x1080@0 (max: 0) resolution, curr 4, total 5
20:566  0:000  OCC: Mode 0 - 1280x1024:1
20:566  0:000  OCC: Mode 1 - 1024x768:1
20:566  0:000  OCC: Mode 2 - 640x480:1
20:566  0:000  OCC: Mode 3 - 800x600:1
20:566  0:000  OCC: Mode 4 - 1920x1080:1
20:566  0:000  OCC: Current mode matches desired mode 4
20:566  0:000  OC: Changed resolution to 1920x1080@0 (max: 0) from 1920x1080 - Already started
20:566  0:000  OCC: Using builtin text renderer with 1 scale
20:725  0:158  OCC: Install console control (B4F12DF0/0/0), current - Success
20:725  0:000  OCC: Setup ASCII Output - Success
20:725  0:000  OC: Requested console mode is 0x0 (max: 0) from 
20:725  0:000  OC: Requested not to use audio
20:725  0:000  OC: OcLoadPlatformSupport...
20:725  0:000  OC: OcLoadDevPropsSupport...
20:725  0:000  OC: OcMiscLateInit...
20:725  0:000  OC: Invalid HibernateMode: 
20:725  0:000  OC: Translated HibernateMode  to 0
20:725  0:000  OC: Hibernation detection status is Not Found
20:725  0:000  OC: OcLoadKernelSupport...
20:725  0:000  OC: All green, starting boot management...
20:725  0:000  DevicePath = PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)/VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,8835C31F73E7374DBACB41C3662555CA)/\System\Library\CoreServices\boot.efi
20:732  0:007  OCB: Arch filtering BBC69018(621112)->BBC69018(621112) caps 4 - Success
20:891  0:159  GetOSVersion: 10.15.6 (19G73)
20:891  0:000  Will not patch boot.efi
20:891  0:000  === [ PatchSmbios ] =============================
20:891  0:000  insert table 9 for dev 0:1
20:891  0:000  insert table 9 for dev 0:0
20:891  0:000  Table 11 present, but rewritten for us
20:892  0:000  Trusting SMBIOS...
20:892  0:000  Channels: 1
20:892  0:000  Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
20:892  0:000  trusted SMBIOS data:
20:892  0:000  SmbiosTable.Type17->Vendor = Micron
20:892  0:000  SmbiosTable.Type17->SerialNumber = 00000000
20:892  0:000  SmbiosTable.Type17->PartNumber =                   
20:892  0:000   partNum unknown
20:892  0:000  Type17->Manufacturer corrected by SMBIOS from NoName to Micron
20:892  0:000  SMBIOS Type 17 Index = 0 => 0 0:
20:892  0:000  BANK 0 DIMM0 1600MHz 4096MB(Ext:0MB)
20:892  0:000  SMBIOS Type 17 Index = 1 => 1 1:
20:892  0:000  BANK 0 DIMM1 EMPTY
20:892  0:000  trusted SMBIOS data:
20:892  0:000  SmbiosTable.Type17->Vendor = Samsung
20:892  0:000  SmbiosTable.Type17->SerialNumber = 18122CB1
20:892  0:000  SmbiosTable.Type17->PartNumber = M471B5173DB0-YK0  
20:892  0:000   partNum=M471B5173DB0-YK0  
20:892  0:000  SPD data in use:
20:892  0:000  SmbiosTable.Type17->Vendor = Samsung
20:892  0:000  SmbiosTable.Type17->SerialNumber = 18122CB1
20:892  0:000  SmbiosTable.Type17->PartNumber = M471B5173DB0-YK0
20:892  0:000  SMBIOS Type 17 Index = 2 => 2 2:
20:892  0:000  BANK 0 DIMM2 1600MHz 4096MB(Ext:0MB)
20:892  0:000  mTotalSystemMemory = 8192
20:892  0:000  NumberOfMemoryDevices = 3
20:892  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 1000
20:892  0:000  Type20[1]->End = 0x7FFFFF, Type17[2] = 3000
20:892  0:000  Table 131 is present, CPUType=31
20:892  0:000  Change to: 705
20:892  0:000  === [ PatchACPI ] ===============================
20:892  0:000  Xsdt reallocation done
20:892  0:000  old FADT length=10C
20:892  0:000   SignatureFixup: 0xB9 -> 0x0
20:892  0:000  DSDT found in Clover volume OEM folder: \EFI\CLOVER\ACPI\patched\\DSDT.aml
20:892  0:000  DSDT found in Clover volume: \EFI\CLOVER\ACPI\patched\\DSDT.aml
20:892  0:000  Apply DsdtFixMask=0x00000000
20:892  0:000  === [ FixBiosDsdt ] =============================
20:893  0:000  PreCleanup XSDT: count=14, length=148
20:893  0:000  PreCleanup XSDT, corrected XSDT: count=14, length=148
20:893  0:000  === [ ACPIDropTables ] ==========================
20:893  0:000  === [ DropSSDT ] ================================
20:893  0:000  Drop tables from XSDT, SIGN=SSDT TableID= Length=0
20:893  0:000   Table[5]: SSDT  Cpu0Ist  1337 dropped
20:893  0:000   Table[6]: SSDT  CpuPm  2776 dropped
20:893  0:000   Table[9]: SSDT  SataTabl  727 dropped
20:893  0:000   Table[10]: SSDT  SaSsdt   16161 dropped
20:893  0:000   Table[11]: SSDT  SgPch  3533 dropped
20:893  0:000   Table[12]: SSDT  OptTabl  6637 dropped
20:893  0:000  === [ ACPIPatchedAML ] ==========================
20:893  0:000  Sorted
20:893  0:000  Inserting table[0]:DSDT.aml from \EFI\CLOVER\ACPI\patched: size=94458 ... Success
20:901  0:008  Inserting table[1]:SSDT-0.aml from \EFI\CLOVER\ACPI\patched: size=638 ... Success
20:902  0:001  Inserting table[2]:SSDT-1.aml from \EFI\CLOVER\ACPI\patched: size=1847 ... Success
20:903  0:001  Inserting table[3]:SSDT-5.aml from \EFI\CLOVER\ACPI\patched: size=747 ... Success
20:904  0:001  Inserting table[4]:SSDT-6.aml from \EFI\CLOVER\ACPI\patched: size=16647 ... Success
20:907  0:002  Inserting table[5]:SSDT-7.aml from \EFI\CLOVER\ACPI\patched: size=4824 ... Success
20:908  0:001  Inserting table[6]:SSDT-8.aml from \EFI\CLOVER\ACPI\patched: size=5067 ... Success
20:909  0:001  Inserting table[7]:SSDT-EC.aml from \EFI\CLOVER\ACPI\patched: size=91 ... Success
20:910  0:000  Inserting table[8]:SSDT-PNLF.aml from \EFI\CLOVER\ACPI\patched: size=787 ... Success
20:911  0:001  Inserting table[9]:SSDT-UIAC.aml from \EFI\CLOVER\ACPI\patched: size=342 ... Success
20:912  0:000  ApicCPUNum=4
20:912  0:000  Cleanup XSDT: count=24, length=228
20:912  0:000  corrected XSDT count=18, length=180
20:912  0:000  === [ RestSetup macOS ] =========================
20:912  0:000  EdidDiscovered size=128
20:912  0:000  --- Discovered EDID Table size:128
20:912  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  06  AF
20:912  0:000  010  |  ED  36  00  00  00  00  00  17  01  04
20:912  0:000  020  |  95  22  13  78  02  D1  15  9E  59  53
20:912  0:000  030  |  9B  27  1E  50  54  00  00  00  01  01
20:912  0:000  040  |  01  01  01  01  01  01  01  01  01  01
20:912  0:000  050  |  01  01  01  01  78  37  80  B4  70  38
20:912  0:000  060  |  2E  40  6C  30  AA  00  58  C1  10  00
20:912  0:000  070  |  00  18  00  00  00  0F  00  00  00  00
20:912  0:000  080  |  00  00  00  00  00  00  00  00  00  20
20:912  0:000  090  |  00  00  00  FE  00  41  55  4F  0A  20
20:912  0:000  100  |  20  20  20  20  20  20  20  20  00  00
20:912  0:000  110  |  00  FE  00  42  31  35  36  48  54  4E
20:912  0:000  120  |  30  33  2E  36  20  0A  00  97
20:912  0:000  add device: PciRoot(0x0)/Pci(0x2,0x0)
20:912  0:000     Add key=framebuffer-patch1-replace valuelen=48
20:912  0:000     Add key=framebuffer-patch1-find valuelen=48
20:912  0:000     Add key=framebuffer-patch1-enable valuelen=4
20:912  0:000     Add key=framebuffer-patch0-replace valuelen=20
20:912  0:000     Add key=framebuffer-patch0-find valuelen=20
20:912  0:000     Add key=framebuffer-patch0-enable valuelen=4
20:912  0:000     Add key=device-id valuelen=4
20:912  0:000     Add key=AAPL00,override-no-edid valuelen=128
20:912  0:000     Add key=AAPL,ig-platform-id valuelen=4
20:912  0:000  Intel GFX injection not set
20:912  0:000  stringlength = 1746
20:912  0:000  CurrentMode: Width=1920 Height=1080
20:916  0:003  Use origin smbios table type 1 guid.
20:917  0:000  Custom boot is disabled
 

all works fine with clover rev 5119

 

when trying to boot new clover revision from ssd efi folder clover can't start ! as on picture cloverdirpathasxstringw.endwith(\)

can't solve this problem

any help thanks on advance

122016360_349885562986700_836208699903213296_n.jpg

  • Confused 1
  • Sad 1
Link to comment
Share on other sites

16 hours ago, verleihnix said:

I tried release 5125 with my desktop build. It did not load the DSDT.aml.

Is the something to change? 

I may propose you to install Fat.efi into CLOVER/drivers/UEFI. May be same driver from your BIOS is not good enough as I sometime encountered.

Link to comment
Share on other sites

C1F40FB0-2EE2-40FD-BC5E-D63447FAF54D.thumb.jpeg.41c9aa0ddc9d442d841c0541c5ac7e20.jpegHello @slice 

After updating to beta 10, I checked if clover boots Big Sur and it did not work. I tried with clover v5123 and 5125 and none of them worked. I updated all kexts.

It was working with beta 9. I’m getting a memory panic when booting. Could you check if there’s something wrong? My build is a GA-Z97-HD3, RX-580 8GB, 16GB RAM. Attached is my clover efi folder.

Archive 2.zip

Link to comment
Share on other sites

20 minutes ago, ameenjuz said:

i need working EFI for kabylake configration intel hd graphic hd620 intel i5-7200 with latest  clover v5125

i have tried a lot but couldn't succes

I'm in the same boat)

Link to comment
Share on other sites

I need to know from the developers @Slice @Jief_Machak to be sure, how to define Big Sur in MatchOS on Clover 
11
11.x
11,
10.16.x
11.10.x

which of these is the most correct? 

8 hours ago, jsl2000 said:

Can you share your config.plist without personal info for reference in my Ryzen hackintosh ?

is the one that put Fabiosun in the big sur thread

 

i tried to define matchos but in doing so then it doesn't work

  • Like 1
Link to comment
Share on other sites

31 minutes ago, iCanaro said:

I need to know from the developers @Slice @Jief_Machak to be sure, how to define Big Sur in MatchOS on Clover 
11
11.x
11,
10.16.x
11.10.x

which of these is the most correct? 

is the one that put Fabiosun in the big sur thread

 

i tried to define matchos but in doing so then it doesn't work

I can’t get BS to boot with clover yet on my ryzen build or else I would help find which one is correct. 
 

Is OpenRuntime.efi still needed with Clover 5125+?

Edited by SavageAUS
  • Thanks 1
Link to comment
Share on other sites

1 hour ago, jlrycm said:

After updating to beta 10, I checked if clover boots Big Sur and it did not work. I tried with clover v5123 and 5125 and none of them worked. I updated all kexts.
It was working with beta 9. I’m getting a memory panic when booting. Could you check if there’s something wrong? My build is a GA-Z97-HD3, RX-580 8GB, 16GB RAM. Attached is my clover efi folder.

Boot from Preboot. 

Link to comment
Share on other sites

8 minutes ago, SavageAUS said:

Is OpenRuntime.efi still needed with Clover 5125+?

yes i use the 4kb one included in the clover iso package

 

8 minutes ago, SavageAUS said:

I can’t get BS to boot with clover yet on my ryzen build or else I would help find which one is correct. 

i hope you get to desktop soon with BS on your ryzen  :) I spent the whole day yesterday modifying/adapting kernel patches in the config that today come out of my orbits :D 

4 minutes ago, kushwavez said:

Boot from Preboot. 

for the record, I point out that on AMD with BS beta9 Clover manages to boot directly on the icon of 11 shown in the GUI

  • Like 1
Link to comment
Share on other sites

4 minutes ago, iCanaro said:

yes i use the 4kb one included in the clover iso package

 

i hope you get to desktop soon with BS on your ryzen  :) I spent the whole day yesterday modifying/adapting kernel patches in the config that today come out of my orbits :D 

for the record, I point out that on AMD with BS beta9 Clover manages to boot directly on the icon of 11 shown in the GUI

Are you able to share your config.plist? So I can compare to mine? I get a kernel panic but at least I’m not stuck on STARTBS anymore. 
Is yours threadripper?

4 minutes ago, iCanaro said:

yes i use the 4kb one included in the clover iso package

 

i hope you get to desktop soon with BS on your ryzen  :) I spent the whole day yesterday modifying/adapting kernel patches in the config that today come out of my orbits :D 

for the record, I point out that on AMD with BS beta9 Clover manages to boot directly on the icon of 11 shown in the GUI

Are you able to share your config.plist? So I can compare to mine? I get a kernel panic but at least I’m not stuck on STARTBS anymore. 
Is yours threadripper?

Link to comment
Share on other sites

9 minutes ago, iCanaro said:

for the record, I point out that on AMD with BS beta9 Clover manages to boot directly on the icon of 11 shown in the GUI

Beta 9 is okay for me too, but from Beta 10 I can only get in from Preboot. I get KP from the normal partition, related to corecrypto.

In my understanding this is because Apple did something related to the security or encryption and you have to boot from Preboot to "decrypt" and get inside. Just like on OTA or normal Installers, you have to use Preboot to install or the installation will fail. 

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

9 minutes ago, SavageAUS said:

Are you able to share your config.plist? So I can compare to mine? I get a kernel panic but at least I’m not stuck on STARTBS anymore. 
Is yours threadripper?

here they are, with a big sur start and with the other mojave and catalina on my T-RyZo signed

config-BS.plist

config-moj_cata.plist

  • Like 1
Link to comment
Share on other sites

Spoiler

 

@kushwavez, thanks a lot for the tip. I was able to boot from Preboot, but no wifi. The wifi device properties in the config file are not injected nor the serialization in the DSDT is recognized when booting BS through clover in this way.

Edited by jlrycm
Link to comment
Share on other sites

58 minutes ago, iCanaro said:

here they are, with a big sur start and with the other mojave and catalina on my T-RyZo signed

config-BS.plist

config-moj_cata.plist

Thanks for your 2 config.plist, but unfortunately both are freeze during booting.

Can you share your working BOOTX64.efi/CloverX64.efi for reference to debug ?

Link to comment
Share on other sites

@SavageAUS

I had the same KP issue with my Z170X Rig so I updated the FakeSMC and removed the old plugins and deleted the Quirks section from Clover's plist and just copied them from my working PC config and it solved the KP issue. You can give it a try.

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...