Lordadmiral Drake Posted June 24, 2013 Share Posted June 24, 2013 Tried redownloading clovergrower and everything. Still same error Link to comment Share on other sites More sharing options...
Slice Posted June 25, 2013 Share Posted June 25, 2013 Did that, now getting this: build.py... : error 7000: Failed to execute command make tbuild [/Users/jonathandrake/Downloads/CloverGrower/src/edk2/Build/Clover/RELEASE_GCC48/X64/MdePkg/Library/BasePcdLibNull/BasePcdLibNull] build.py... : error 7000: Failed to execute command make tbuild [/Users/jonathandrake/Downloads/CloverGrower/src/edk2/Build/Clover/RELEASE_GCC48/X64/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull] build.py... : error 7000: Failed to execute command make tbuild [/Users/jonathandrake/Downloads/CloverGrower/src/edk2/Build/Clover/RELEASE_GCC48/X64/MdePkg/Library/BaseMemoryLib/BaseMemoryLib] build.py... : error F002: Failed to build module /Users/jonathandrake/Downloads/CloverGrower/src/edk2/MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf [X64, GCC48, RELEASE] - Failed - May be you mix GloverGrower with other technology? GCC48 introduced by STLVNUB in his GloverGrower and so there must be a script to compile gcc-4.8.x and script to correct common ebuild.sh. I am still using GCC47 and it is default compiler for scripts buildgcc.sh and ebuild.sh . Hi, I'm having a problem with Mavericks, ML is fine, i can boot it with Clover. With Mavericks, it just hangs at, see screenshot. Any suggestions? Many people installed Mavericks with Clover having no problems. Did you use revision 1888 or something else? Link to comment Share on other sites More sharing options...
WaldMeister Posted June 25, 2013 Share Posted June 25, 2013 Did you use revision 1888 or something else? Rev 1888 yes. It does work with ML. Attached my config.plist, seems it does not matter what i change, can't get past the previous screenshot. config.plist.zip Link to comment Share on other sites More sharing options...
Alex009988 Posted June 25, 2013 Share Posted June 25, 2013 Hello. HexEdit helped and CMOS stopped resetting. Link to comment Share on other sites More sharing options...
madmodmike Posted June 26, 2013 Share Posted June 26, 2013 Hello people!I moved from Chameleon to Clover less than two weeks ago, looks like everything is working fine, but I cannot overcome a very simple problem: the USB keyboard (in clover menu) doesn't work, at all.Clover is running on an old P5Q-E, with BIOS, not EFI (it shows something like "boot:/boot 7..." during startup, "7" should be legacy mode, right?), from the pkg installer I've selected the UsbMouseDxe driver, and the USB mouse seems working (pointer movements are a little clumsy, compared to Clover on a EFI board, but well, better than nothing ), but the USB keyboard doesn't work at all: during Clover startup, the Numlock turns on, then off, and when the Clover menu is loaded, there's no input available from keyboard, I can only use the mouse.I tried poking around with USBLegacy options in bios, tried moving the USB cable into different USB ports, tried more than one keyboard, no luck until now. The keyboard is a generic Microsoft DMK 3000 USB, but I suppose that's not the matter, I also tried some Logitech, without any luck.The only way to get keyboard input is to connect an old PS/2 keyboard, but keeping two keyboards at once only for Clover doesn't sound as a reasonable solution Any help would be really appreciated, if you need debug info or whatever just ask me.Thank you very much! Link to comment Share on other sites More sharing options...
Alex009988 Posted June 27, 2013 Share Posted June 27, 2013 As far as I know you are using XPC. I'm "omnivorous". And use Clover/XPC/bareboot. So that I'm also one of users of Clover and I Wanna know what can I do to patch RTC at Mavericks! Link to comment Share on other sites More sharing options...
Slice Posted June 27, 2013 Share Posted June 27, 2013 Ask SunKi why your binary patch is wrong. Link to comment Share on other sites More sharing options...
xpamamadeus Posted June 27, 2013 Share Posted June 27, 2013 I'm "omnivorous". And use Clover/XPC/bareboot. So that I'm also one of users of Clover and I Wanna know what can I do to patch RTC at Mavericks! Link to comment Share on other sites More sharing options...
radargb Posted June 27, 2013 Share Posted June 27, 2013 I can confirm that charger issue i wrote about couple posts above, doesnt occurs when booting with chameleon bootloader. Can someone from developers help me solve this? Link to comment Share on other sites More sharing options...
WaldMeister Posted June 27, 2013 Share Posted June 27, 2013 Many people installed Mavericks with Clover having no problems. Did you use revision 1888 or something else? Consider me the exception, i'm not the only 1 with this issue. See #1898 Any suggestion is welcome. It boots fine with Chameleon, but i would not want to revert to it. I attached a screenshot of the drivers, without those, i can not boot OS X, well, if i remove some, the boot time will increase by 2 min or so. I even started playing with my bios options, it's unlocked, but it did not make a difference. Thanks in advance. Link to comment Share on other sites More sharing options...
kidalive Posted June 27, 2013 Share Posted June 27, 2013 I recently build a new PC with a GA-z77m-dh3-mvp MB, I5-3570K CPU. After migrated to Clover Bootloader, the memory speed of shows not correct. I got 4GB*2 DDR3-1600 Mem but it shows 8GB 1868 Mhz RAM. And the CPU info also is wrong. I got a I5-3570k Cpu and the bus speed seems also not right. Is clover not clever enough to identify my Mem? I have already tried 3 SMBIOS settings with config.plist a configuration setting Doc of Clover. It seems Clover is not stable also. How can I help file the bug?Here is what the about this apple shows here. Seems to be overclocked.I used four efi drivers in Drivers64UEFI shows below. I don`t know what the OsxFatBinaryDrv-64.efi does. Buy the way I used the config.plist below. The macmini EFI firmware update and the thunderbolt update keeps showing any idea to prevent that? I used the Macmini6,2 model. I fixed the sleep issue with some modification with DSDT but the power off stops working can you shed some light? Below I attaches with my config.plist file, Darwindump file and the DSDT file I`m using. I have not added HPET IRQs yet. Is that necessary? darwin dump log.zip dsdt_A.dsl.zip Link to comment Share on other sites More sharing options...
Andy Vandijck Posted June 27, 2013 Share Posted June 27, 2013 I tried the latest Clover revision (R1902) after building it with CloverGrowerPro. I must say I really like the memory override (allows fine grained control and vendor override in SMBios section, more info, see projectosx). The result is in the screenshot below. I also uploaded the built package to DropBox: https://www.dropbox.com/s/hve3sy52cnnwe91/Clover_v2_r1902.pkg.zip?m Great work guys. Link to comment Share on other sites More sharing options...
madmodmike Posted June 27, 2013 Share Posted June 27, 2013 Hello people! I moved from Chameleon to Clover less than two weeks ago, looks like everything is working fine, but I cannot overcome a very simple problem: the USB keyboard (in clover menu) doesn't work, at all. Clover is running on an old P5Q-E, with BIOS, not EFI (it shows something like "boot:/boot 7..." during startup, "7" should be legacy mode, right?), from the pkg installer I've selected the UsbMouseDxe driver, and the USB mouse seems working (pointer movements are a little clumsy, compared to Clover on a EFI board, but well, better than nothing ), but the USB keyboard doesn't work at all: during Clover startup, the Numlock turns on, then off, and when the Clover menu is loaded, there's no input available from keyboard, I can only use the mouse. I tried poking around with USBLegacy options in bios, tried moving the USB cable into different USB ports, tried more than one keyboard, no luck until now. The keyboard is a generic Microsoft DMK 3000 USB, but I suppose that's not the matter, I also tried some Logitech, without any luck. The only way to get keyboard input is to connect an old PS/2 keyboard, but keeping two keyboards at once only for Clover doesn't sound as a reasonable solution Any help would be really appreciated, if you need debug info or whatever just ask me. Thank you very much! Any hint? The keyboard is driving me crazy Link to comment Share on other sites More sharing options...
C.Frio Posted June 27, 2013 Share Posted June 27, 2013 Hi i got some problems with an GA p55 with mouse and clover.. not the same but not working at all.... solved with IOUSBFamilyRollback.. c.frio Link to comment Share on other sites More sharing options...
Slice Posted June 27, 2013 Share Posted June 27, 2013 Any hint? The keyboard is driving me crazy Set Legacy USB True. Check latest revision of Clover. -> you must see keyboard in Clover GUI. Set <key>PCI</key> <dict> <key>USBInjection</key> <true/> <key>USBFixOwnership</key> <true/> <key>InjectClockID</key> <true/> </dict> To have working keyboard and mouse in OSX. I am using USB keyboard Genius KB-M220 and USB mouse Logitech M100. Working fine everywhere. As well as iMac aluminum keyboard. Link to comment Share on other sites More sharing options...
madmodmike Posted June 28, 2013 Share Posted June 28, 2013 Set Legacy USB True. Check latest revision of Clover. -> you must see keyboard in Clover GUI. Set <key>PCI</key> <dict> <key>USBInjection</key> <true/> <key>USBFixOwnership</key> <true/> <key>InjectClockID</key> <true/> </dict> To have working keyboard and mouse in OSX. I am using USB keyboard Genius KB-M220 and USB mouse Logitech M100. Working fine everywhere. As well as iMac aluminum keyboard. Hi Slice, thank you for you reply! I upgraded Clover to r1902, I turned on "Legacy USB" in my bios, but nothing changed, under Clover GUI, the keyboard is still not functioning I probably forgot to say, this only happens in Clover menu: under OSX, the USB keyboard is working as expected (I already have those keys set to "true" in my config.plist), but under Clover menu, my only option to interact with Clover GUI is to plug a PS/2 keyboard before booting my machine. Don't know if this might be useful, but during the Clover startup (after boot:/boot 7...), the Numlock light goes on for a while, then it turns off, and when the Clover GUI finally pop up, there's no input available from the USB keyboard. Link to comment Share on other sites More sharing options...
Slice Posted June 28, 2013 Share Posted June 28, 2013 Is there any other settings in BIOS related to USB and related to keyboard? Does keyboard work in BIOS? Link to comment Share on other sites More sharing options...
kidalive Posted June 28, 2013 Share Posted June 28, 2013 My mem speed was detected by Clover Bootloader shows 1866 Mhz. Is this normal? I used mem override introduced by a apentia from ProjectOSX to changed it to 1600 Mhz. I got Nanya PC-12800 DDR3-1600 mem which supports XMP 1.2. It has XMP 1866 Mhz profile. Will the override block the 1866 Mhz XMP profile? DarwinDump info about my Mem shows below. 0:286 0:000 ScanSPD() start 0:286 0:000 SMBus CmdReg: 0x1 0:286 0:000 Scanning SMBus [8086:1E22], mmio: 0xF7E15004, ioport: 0xF040, hostc: 0x1 0:313 0:027 SPD[2]: Type 11 @0x52 0:322 0:008 Using XMP Profile2, dropping previous frequency 1600MHz 0:322 0:000 DDR speed 1866MHz 0:322 0:000 Slot: 2 Type 24 4096MB 1866MHz Vendor=Nanya Technology PartNo=M2X4G64CB8HG9N-DG SerialNo=09030005000A0402 0:336 0:014 SPD[3]: Type 11 @0x53 0:344 0:008 Using XMP Profile2, dropping previous frequency 1600MHz 0:344 0:000 DDR speed 1866MHz 0:344 0:000 Slot: 3 Type 24 4096MB 1866MHz Vendor=Nanya Technology PartNo=M2X4G64CB8HG9N-DG SerialNo=0C0B0005000A0405 0:472 0:127 ScanSPD() end 0:472 0:000 Calibrated TSC frequency =3403814640 =3403MHz Link to comment Share on other sites More sharing options...
madmodmike Posted June 28, 2013 Share Posted June 28, 2013 Is there any other settings in BIOS related to USB and related to keyboard? Other than Legacy Mode, nothing I could think of. These are all the options available in my bios: Tried every combination, but got nothing, in Clover GUI only the mouse works (I installed UsbMouseDxe, no problems with the mouse so far). Does keyboard work in BIOS? Yes it does, (like the screenshot, it detects "1 Keyboard, 1 Mouse", even during the POST messages). Link to comment Share on other sites More sharing options...
xpamamadeus Posted June 28, 2013 Share Posted June 28, 2013 Do u have keyboard connected through USB hub ? Link to comment Share on other sites More sharing options...
madmodmike Posted June 28, 2013 Share Posted June 28, 2013 Do u have keyboard connected through USB hub ? Hello, nope, connected directly to the motherboard USB ports on the back. Also tried to cycle all the available ports, with no luck Thank you. Link to comment Share on other sites More sharing options...
oldnapalm Posted June 28, 2013 Share Posted June 28, 2013 I have a similar problem with Asus P5E, but only using wireless keyboard. Wired USB keyboard works fine in Clover menu. http://www.projectosx.com/forum/index.php?s=&showtopic=2562&view=findpost&p=28585 My BIOS USB options are the same as madmodmike, I tried everything with no luck. If I connect the same USB dongle on my Asus N53JQ laptop, keyboard works in Clover menu. Link to comment Share on other sites More sharing options...
madmodmike Posted June 28, 2013 Share Posted June 28, 2013 Ok, update: I had another USB keyboard around, but wireless with a common "dongle" for both keyboard and mouse, it's a Wireless Media Desktop 1000 (this is a Microsoft keyboard too, like the Wired DMK 3000 I'm using right now) with the Wireless Desktop Receiver 3.1, this large thing here: I plugged the USB receiver on the front USB ports (no hub, they're directly wired to the internal motherboard USB headers), rebooted, and... IT WORKS.. I left both my wired and wireless keyboard connected, here's the final status: *the wireless mouse WORKS *the wireless keyboard WORKS (both the mouse and keyboard share the same USB receiver) *the wired mouse WORKS *the wired keyboard DOESN'T WORK. So, I suppose at this point this isn't a BIOS issue, am I right? Can be something done to make my wired keyboard work on Clover GUI? btw, both wired and wireless work on BIOS too. Link to comment Share on other sites More sharing options...
Maniac10 Posted June 28, 2013 Share Posted June 28, 2013 My mem speed was detected by Clover Bootloader shows 1866 Mhz. Is this normal? I used mem override introduced by a apentia from ProjectOSX to changed it to 1600 Mhz. I got Nanya PC-12800 DDR3-1600 mem which supports XMP 1.2. It has XMP 1866 Mhz profile. Will the override block the 1866 Mhz XMP profile? DarwinDump info about my Mem shows below. 0:286 0:000 ScanSPD() start 0:286 0:000 SMBus CmdReg: 0x1 0:286 0:000 Scanning SMBus [8086:1E22], mmio: 0xF7E15004, ioport: 0xF040, hostc: 0x1 0:313 0:027 SPD[2]: Type 11 @0x52 0:322 0:008 Using XMP Profile2, dropping previous frequency 1600MHz 0:322 0:000 DDR speed 1866MHz 0:322 0:000 Slot: 2 Type 24 4096MB 1866MHz Vendor=Nanya Technology PartNo=M2X4G64CB8HG9N-DG SerialNo=09030005000A0402 0:336 0:014 SPD[3]: Type 11 @0x53 0:344 0:008 Using XMP Profile2, dropping previous frequency 1600MHz 0:344 0:000 DDR speed 1866MHz 0:344 0:000 Slot: 3 Type 24 4096MB 1866MHz Vendor=Nanya Technology PartNo=M2X4G64CB8HG9N-DG SerialNo=0C0B0005000A0405 0:472 0:127 ScanSPD() end 0:472 0:000 Calibrated TSC frequency =3403814640 =3403MHz That's not a DarwinDump, it's Clover's bootlog. If the memory is 1866MHz and Clover detects it correctly, what is the problem then? Why do you want to change it to 1600MHz, even though it's only cosmetic? Link to comment Share on other sites More sharing options...
kidalive Posted June 29, 2013 Share Posted June 29, 2013 That's not a DarwinDump, it's Clover's bootlog. If the memory is 1866MHz and Clover detects it correctly, what is the problem then? Why do you want to change it to 1600MHz, even though it's only cosmetic? My system cannot get sleep and wake up I thought it could be mem speed related. I added the EHC1 and EHC2 DSDT hack. It can go to sleep and wake if I click twice mouse or the display goes black or reboots automatically. Any idea? Link to comment Share on other sites More sharing options...
Recommended Posts