polyzargone Posted June 14, 2016 Share Posted June 14, 2016 Who try? Use an USB stick because for this test I've only replaced El Capitan pattern, don't cry after! CLOVERX64.efi.zip Just tried with a vanilla installer and it still doesn't load kexts from /EFI/CLOVER/kexts/Other or /EFI/CLOVER/kexts/10.12 Anyway, thanks and have some rest . 2 Link to comment Share on other sites More sharing options...
Micky1979 Posted June 14, 2016 Share Posted June 14, 2016 Tomorrow Slice and other devs will fix everithing.. sure the job is less than was for El Capitan or Yosemite. 2 Link to comment Share on other sites More sharing options...
polyzargone Posted June 14, 2016 Share Posted June 14, 2016 BTW : Using the terminal command and mounting BaseSystem.dmg worked . Clover now sees the partition even if I still have no success reaching the desktop. Link to comment Share on other sites More sharing options...
Micky1979 Posted June 14, 2016 Share Posted June 14, 2016 Just tried with a vanilla installer and it still doesn't load kexts from /EFI/CLOVER/kexts/Other or /EFI/CLOVER/kexts/10.12 Ok I tried: 0:100 0:100 MemLog inited, TSC freq: 2494332664 0:100 0:000 0:100 0:000 Now is 14.6.2016, 3:52:5 (GMT) 0:100 0:000 Starting Clover rev 3557 on INSYDE Corp. EFI 0:100 0:000 Build with: [Args: ./ebuild.sh -mc --no-usb -t XCODE5 | Command: build -D DISABLE_USB_SUPPORT -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -p Clover/Clover.dsc -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.11.6 | XCODE: 7.3.1] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) @97562618 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 Total Memory Slots Count = 2 0:100 0:000 Type 17 Index = 0 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/0, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 Bottom-Slot 1(top) 0:100 0:000 SmbiosTable.Type17->Vendor = Micron Technology 0:100 0:000 SmbiosTable.Type17->SerialNumber = EA70D331 0:100 0:000 SmbiosTable.Type17->PartNumber = 16KTF51264HZ-1G6M1 0:100 0:000 Type 17 Index = 1 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 Bottom-Slot 2(under) 0:100 0:000 SmbiosTable.Type17->Vendor = Micron Technology 0:100 0:000 SmbiosTable.Type17->SerialNumber = EA70D32F 0:100 0:000 SmbiosTable.Type17->PartNumber = 16KTF51264HZ-1G6M1 0:100 0:000 Boot status=0 0:100 0:000 Clover revision: 3557 running on HP Pavilion dv7 Notebook PC 0:100 0:000 ... with board 181D 0:100 0:000 CPU Vendor = 756E6547 Model=306A9 0:100 0:000 got cores from CPUID_1 = 0 0:100 0:000 The CPU supported turbo 0:100 0:000 BrandString = Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz 0:100 0:000 MSR 0xE2 before patch 1E008404 0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on 0:100 0:000 MSR 0xE4 00020414 0:100 0:000 MSR 0xCE 00080C10_E0011900 0:100 0:000 non-usable FLEX_RATIO = 110000 0:100 0:000 corrected FLEX_RATIO = 100000 0:100 0:000 MSR 0x1B0 00000000 0:100 0:000 FSBFrequency=100MHz DMIvalue=100000kHz 0:100 0:000 Corrected FSBFrequency=100MHz 0:100 0:000 Vendor/Model/Stepping: 0x756E6547/0x3A/0x9 0:100 0:000 Family/ExtFamily: 0x6/0x0 0:100 0:000 MaxDiv/MinDiv: 25.0/12 0:100 0:000 Turbo: 29/29/29/31 0:100 0:000 Features: 0xBFEBFBFF 0:100 0:000 Threads: 4 0:100 0:000 Cores: 2 0:100 0:000 FSB: 100 MHz 0:100 0:000 CPU: 2500 MHz 0:100 0:000 TSC: 2500 MHz 0:100 0:000 PIS: 400 MHz 0:100 0:000 PCI (00|00:00.00) : 8086 0154 class=060000 0:100 0:000 PCI (00|00:01.00) : 8086 0151 class=060400 0:100 0:000 PCI (00|01:00.00) : 10DE 0DE9 class=030000 0:100 0:000 Found NVidia model=HP GeForce GT 630M family C1 0:100 0:000 PCI (00|01:00.01) : FFFF FFFF class=FFFFFF 0:100 0:000 PCI (00|00:02.00) : 8086 0166 class=030000 0:100 0:000 Found GFX model=Intel HD Graphics 4000 0:100 0:000 PCI (00|00:14.00) : 8086 1E31 class=0C0330 0:100 0:000 PCI (00|00:16.00) : 8086 1E3A class=078000 0:100 0:000 PCI (00|00:1A.00) : 8086 1E2D class=0C0320 0:100 0:000 PCI (00|00:1B.00) : 8086 1E20 class=040300 0:100 0:000 PCI (00|00:1C.00) : 8086 1E10 class=060400 0:100 0:000 PCI (00|00:1C.01) : 8086 1E12 class=060400 0:100 0:000 PCI (00|08:00.00) : 10EC 5229 class=FF0000 0:100 0:000 PCI (00|00:1C.03) : 8086 1E16 class=060400 0:100 0:000 PCI (00|0A:00.00) : 168C 002B class=028000 0:100 0:000 PCI (00|00:1C.05) : 8086 1E1A class=060400 0:100 0:000 PCI (00|0B:00.00) : 10EC 8168 class=020000 0:100 0:000 LAN 0, Vendor=10EC, MMIO=2000 0:100 0:000 PCI (00|00:1D.00) : 8086 1E26 class=0C0320 0:100 0:000 PCI (00|00:1F.00) : 8086 1E57 class=060100 0:100 0:000 PCI (00|00:1F.02) : 8086 282A class=010400 0:100 0:000 PCI (00|00:1F.03) : 8086 1E22 class=0C0500 0:100 0:000 PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF 0:100 0:000 Clover load options size = 2 bytes 0:100 0:000 Found Plist String = , parse XML in LoadOptions 0:100 0:000 Xml in load options is bad 0:113 0:013 Using OEM config.plist at path: EFI\CLOVER\config.plist 0:114 0:000 EFI\CLOVER\config.plist loaded: Success 0:121 0:007 Found theme directory: Pandora 0:135 0:013 Found theme directory: embedded 0:139 0:004 Found theme directory: random 0:139 0:000 Loading early settings 0:139 0:000 timeout set to 5 0:139 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:139 0:000 KextsToPatch: 5 requested 0:139 0:000 KextsToPatch 0: IOAHCIBlockStorage (Enable TRIM for SSD) Kext bin patch, data len: 11 0:139 0:000 KextsToPatch 1: AppleUSBXHCIPCI (remove usb limit) Kext bin patch, data len: 7 0:139 0:000 KextsToPatch 2: AppleHDA (Zeroing 11d41984 codec) Kext bin patch, data len: 4 0:139 0:000 KextsToPatch 3: AppleHDA (Patching 11d4198b with 111d76e0 codec) Kext bin patch, data len: 4 0:139 0:000 KextsToPatch 4: AppleHDA (Zeroing 11d41983 codec) Kext bin patch, data len: 4 0:139 0:000 Default theme: Pandora 0:139 0:000 Hiding entries with string Windows 0:139 0:000 Hiding entries with string BOOTX64.EFI 0:139 0:000 LoadDrivers() start 0:144 0:004 Loading FSInject-64.efi status=Success 0:148 0:004 Loading OsxFatBinaryDrv-64.efi status=Success 0:148 0:000 Loading HFSPlus-64.efi status=Success 0:153 0:004 - driver needs connecting 0:153 0:000 1 drivers needs connecting ... 0:153 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:153 0:000 HFS+ driver loaded 0:153 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:316 0:163 LoadDrivers() end 0:316 0:000 Dump SMC keys from NVRAM: 0:320 0:003 SetMaxResolution: found best mode 0: 1600x900 0:320 0:000 - already set 0:320 0:000 Console modes reported: 4, available modes: 0:320 0:000 Mode 1: 80x25 0:320 0:000 Mode 3: 100x31 0:320 0:000 Mode 4: 128x40 (current mode) 0:320 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) 0:320 0:000 ScanSPD() start 0:321 0:000 SMBus device : 8086 1E22 class=0C0500 status=Success 0:321 0:000 SMBus CmdReg: 0x3 0:321 0:000 Scanning SMBus [8086:1E22], mmio: 0xD4615004, ioport: 0x5040, hostc: 0x1 0:321 0:000 Slots to scan [8]... 0:321 0:000 SPD[0]: Type 11 @0x50 0:340 0:019 Not using XMP because it is not present 0:340 0:000 DDR speed 1600MHz 0:340 0:000 Slot: 0 Type 24 4096MB 1600MHz Vendor=Micron Technology PartNo=16KTF51264HZ-1G6M1M1 SerialNo=0E0A07000D030301 0:341 0:000 SPD[2]: Type 11 @0x52 0:360 0:019 Not using XMP because it is not present 0:360 0:000 DDR speed 1600MHz 0:360 0:000 Slot: 2 Type 24 4096MB 1600MHz Vendor=Micron Technology PartNo=16KTF51264HZ-1G6M1M1 SerialNo=0E0A07000D03020F 0:360 0:000 ScanSPD() end 0:361 0:000 Get Acpi Tables List from RSDT: 0:361 0:000 Found table: FACP SLIC-MPC len=268 0:361 0:000 Found table: UEFI 181D len=566 0:361 0:000 Found table: ASF! 181D len=165 0:361 0:000 Found table: HPET 181D len=56 0:361 0:000 Found table: APIC 181D len=140 0:361 0:000 Found table: MCFG 181D len=60 0:361 0:000 Found table: SLIC SLIC-MPC len=374 0:361 0:000 Found table: WDAT 181D len=548 0:361 0:000 Found table: SSDT 181D len=4200 0:361 0:000 Found table: BOOT 181D len=40 0:361 0:000 Found table: ASPT 181D len=52 0:361 0:000 Found table: DBGP 181D len=52 0:361 0:000 Found table: FPDT 181D len=68 0:361 0:000 Found table: SSDT 181D len=2408 0:361 0:000 Found table: SSDT 181D len=2706 0:361 0:000 Found table: SSDT 181D len=11908 0:361 0:000 Found table: BGRT 181D len=56 0:361 0:000 Calibrated TSC frequency =2494332664 =2494MHz 0:361 0:000 Loading main settings 0:361 0:000 USB FixOwnership: true 0:361 0:000 Dropping 3 tables 0:361 0:000 Drop table 0 signature="SSDT" (54445353) length=11623(0x1A) 0:361 0:000 set table: 54445353, 0 to drop: 0:361 0:000 Drop table 1 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043) 0:361 0:000 set table: 54445353, 6D50757043 to drop: 0:361 0:000 Drop table 2 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043) 0:361 0:000 set table: 54445353, 74734930757043 to drop: 0:361 0:000 Config set Fixes will override FixMask mask! 0:361 0:000 final mask=00000000 0:361 0:000 Config set EnableC7: - 0:361 0:000 Config set EnableC6: + 0:361 0:000 Config set EnableC4: - 0:361 0:000 Config set EnableC2: - 0:361 0:000 Config set ChassisType=0x8 0:368 0:007 found 17 volumes with blockIO 0:368 0:000 0. Volume: 0:368 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0) 0:369 0:000 Result of bootcode detection: bootable unknown (legacy) 0:369 0:000 USB volume 0:369 0:000 1. Volume: 0:369 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x1) 0:369 0:000 USB volume 0:369 0:000 2. Volume: 0:369 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) 0:370 0:001 Result of bootcode detection: bootable unknown (legacy) 0:370 0:000 USB volume 0:373 0:002 This is SelfVolume !! 0:373 0:000 3. Volume: 0:373 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(2,GPT,210CD396-A50E-4459-809F-806BC3E02417,0x64028,0x1CA3BB0) 0:374 0:001 Result of bootcode detection: bootable unknown (legacy) 0:374 0:000 USB volume 0:374 0:000 4. Volume: 0:374 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0) 0:374 0:000 found optical drive 0:374 0:000 5. Volume: 0:374 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00) 0:376 0:001 Result of bootcode detection: bootable unknown (legacy) 0:376 0:000 6. Volume: 0:376 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02) 0:377 0:001 7. Volume: 0:377 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(1,GPT,0EC12D22-4440-45F3-8D5E-E391C997B42F,0x28,0x64000) 0:377 0:000 Result of bootcode detection: bootable Clover (clover) 0:377 0:000 8. Volume: 0:377 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(2,GPT,E27BFBDD-9F7E-4CF2-A5B8-8A9F98466AB1,0x64028,0x37E11D8) 0:377 0:000 9. Volume: 0:377 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(3,GPT,073BE15C-342B-402B-8785-30D1674D83D6,0x3885200,0x36EB2B8) 0:377 0:000 10. Volume: 0:377 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(4,GPT,D3398A0E-C09A-4491-97EF-F913506A3801,0x6F704B8,0x135F20) 0:378 0:000 11. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(5,GPT,8F1082D2-9984-4358-A5B8-7652C00BE561,0x70A63D8,0x36EB2B8) 0:378 0:000 12. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(6,GPT,A353112F-8573-4A2A-939D-E1E886FDC4E7,0xA791690,0x135F20) 0:378 0:000 13. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(7,GPT,86D154FF-2298-4DB5-B717-DD2677FBD063,0xA8C75B0,0x132B5DB8) 0:378 0:000 14. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(8,GPT,000D40C9-3556-46D8-AADD-31F2800CB62F,0x1DB7D368,0x175F20) 0:378 0:000 15. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02)\HD(1,GPT,973590F2-ED4B-4D0B-9C97-D0923C07B622,0x28,0x64000) 0:379 0:000 Result of bootcode detection: bootable unknown (legacy) 0:379 0:000 16. Volume: 0:379 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02)\HD(2,GPT,B241BA4F-327C-414C-AD6D-9A7F0188306A,0x64028,0xDEF0B60) 0:379 0:000 Using theme 'Pandora' (EFI\CLOVER\themes\Pandora) 0:379 0:000 OS main and drive as badge 0:382 0:002 Choosing theme Pandora 0:382 0:000 Custom entries start 0:382 0:000 Custom entries finish 0:382 0:000 Scanning loaders... 0:382 0:000 0: 'Whole Disc Boot' no file system 0:382 0:000 1: 'Whole Disc Boot' no file system 0:382 0:000 2: 'EFI' 0:401 0:018 3: 'Install 10.12 Developer Preview' 0:403 0:002 AddLoaderEntry for Volume Name=Install 10.12 Developer Preview 0:555 0:151 4: 'Whole Disc Boot' no file system 0:555 0:000 5: 'Whole Disc Boot' no file system 0:555 0:000 6: 'Whole Disc Boot' no file system 0:555 0:000 7: 'EFI' 0:578 0:023 8: 'Lion' 0:579 0:001 AddLoaderEntry for Volume Name=Lion 0:581 0:001 Check if volume Is Hibernated: 0:581 0:000 Check sleep image 'by signature': 0:583 0:002 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 0:583 0:000 using default sleep image name = \private\var\vm\sleepimage 0:584 0:000 Reading first 512 bytes of sleepimage ... 0:585 0:000 OurBlockIoRead: Lba=E289F8, Offset=1C513F000 (BlockSize=512) 0:585 0:000 sig lion: 7A7A7A7A 0:585 0:000 sig snow: 0 0:585 0:000 no valid sleep image offset was found 0:585 0:000 Reading completed -> Success 0:585 0:000 sleepimage offset could not be acquired 0:585 0:000 hibernated: no - sign 0:586 0:000 Icon 17 (icons\vol_internal_hfs.icns) not found 0:586 0:000 Theme path EFI\CLOVER\themes\Pandora, ThemeDir=972A4F20 0:597 0:011 9: 'Yosemite' 0:598 0:000 AddLoaderEntry for Volume Name=Yosemite 0:599 0:001 Check if volume Is Hibernated: 0:599 0:000 Check sleep image 'by signature': 0:600 0:001 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 0:600 0:000 using default sleep image name = \private\var\vm\sleepimage 0:601 0:000 Reading first 512 bytes of sleepimage ... 0:602 0:000 OurBlockIoRead: Lba=49F56B8, Offset=93EAD7000 (BlockSize=512) 0:602 0:000 sig lion: 7A7A7A7A 0:602 0:000 sig snow: 0 0:602 0:000 no valid sleep image offset was found 0:602 0:000 Reading completed -> Success 0:602 0:000 sleepimage offset could not be acquired 0:602 0:000 hibernated: no - sign 0:613 0:011 10: 'Recovery HD' 0:614 0:000 AddLoaderEntry for Volume Name=Recovery HD 0:630 0:016 11: 'Sierra' 0:631 0:001 AddLoaderEntry for Volume Name=Sierra 0:632 0:001 Check if volume Is Hibernated: 0:632 0:000 Check sleep image 'by signature': 0:633 0:001 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 0:633 0:000 using default sleep image name = \private\var\vm\sleepimage 0:635 0:001 Reading first 512 bytes of sleepimage ... 0:635 0:000 OurBlockIoRead: Lba=83AF3F0, Offset=1075E7E000 (BlockSize=512) 0:635 0:000 sig lion: 0 0:635 0:000 sig snow: 0 0:635 0:000 no valid sleep image offset was found 0:635 0:000 Reading completed -> Success 0:635 0:000 sleepimage offset could not be acquired 0:635 0:000 hibernated: no - sign 0:645 0:010 12: 'Recovery HD' 0:645 0:000 AddLoaderEntry for Volume Name=Recovery HD 0:655 0:010 13: 'El Capitan' 0:657 0:001 AddLoaderEntry for Volume Name=El Capitan 0:659 0:001 Check if volume Is Hibernated: 0:659 0:000 Check sleep image 'by signature': 0:661 0:002 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 0:661 0:000 SleepImage name from pref: ImageVolume = 'El Capitan', ImageName = '\private\var\vm\sleepimage' 0:663 0:001 Reading first 512 bytes of sleepimage ... 0:663 0:000 OurBlockIoRead: Lba=D8C7668, Offset=1B18ECD000 (BlockSize=512) 0:663 0:000 sig lion: 7A7A7A7A 0:663 0:000 sig snow: 0 0:663 0:000 no valid sleep image offset was found 0:663 0:000 Reading completed -> Success 0:663 0:000 sleepimage offset could not be acquired 0:663 0:000 hibernated: no - sign 0:678 0:015 14: 'Recovery HD' 0:679 0:000 AddLoaderEntry for Volume Name=Recovery HD 0:689 0:010 15: 'EFI' 0:698 0:009 16: 'DATI' 0:709 0:010 Custom legacy start 0:709 0:000 Custom legacy end 0:709 0:000 Scanning legacy ... 0:709 0:000 0: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 1: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 2: 'EFI' (legacy) not legacy 0:709 0:000 3: 'Install 10.12 Developer Preview' (legacy) not legacy 0:709 0:000 4: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 5: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 6: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 7: 'EFI' (clover) add legacy 0:710 0:001 added 'Boot Clover from EFI' OSType=3 Icon=clover 0:710 0:000 8: 'Lion' (legacy) not legacy 0:710 0:000 9: 'Yosemite' (legacy) not legacy 0:710 0:000 10: 'Recovery HD' (legacy) not legacy 0:710 0:000 11: 'Sierra' (legacy) not legacy 0:710 0:000 12: 'Recovery HD' (legacy) not legacy 0:710 0:000 13: 'El Capitan' (legacy) not legacy 0:710 0:000 14: 'Recovery HD' (legacy) not legacy 0:710 0:000 15: 'EFI' (legacy) not legacy 0:710 0:000 16: 'DATI' (legacy) not legacy 0:710 0:000 Custom tool start 0:710 0:000 Custom tool end 0:715 0:004 found tool \EFI\CLOVER\tools\Shell64U.efi 0:715 0:000 Checking EFI partition Volume 2 for Clover 0:715 0:000 Found Clover 0:715 0:000 Use anime=Anim-Clover frames=96 0:715 0:000 Checking EFI partition Volume 7 for Clover 0:717 0:001 Found Clover 0:717 0:000 Use anime=Anim-Clover frames=96 0:717 0:000 Checking EFI partition Volume 15 for Clover 0:719 0:001 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 0:719 0:000 EfiBootVolume not found 0:719 0:000 found entry 6. 'Boot Mac OS X from El Capitan', Volume 'El Capitan', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(7,GPT,86D154FF-2298-4DB5-B717-DD2677FBD063,0xA8C75B0,0x132B5DB8)\System\Library\CoreServices\boot.efi' 0:719 0:000 DefaultIndex=6 and MainMenu.EntryCount=16 0:719 0:000 Use anime=Rotary_Logo frames=15 1:253 0:534 Found Mouse device: 1:254 0:000 GUI ready 9:641 8:386 Use anime=Anim-Options frames=96 16:277 6:636 EDITED: kext-dev-mode=1 -v cpus=1 18:419 2:142 ReinitSelfLib after theme change 18:419 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) 18:419 0:000 found 17 volumes with blockIO 18:419 0:000 0. Volume: 18:419 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0) 18:420 0:000 Result of bootcode detection: bootable unknown (legacy) 18:420 0:000 USB volume 18:420 0:000 1. Volume: 18:420 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x1) 18:420 0:000 USB volume 18:420 0:000 2. Volume: 18:420 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) 18:421 0:001 Result of bootcode detection: bootable unknown (legacy) 18:421 0:000 USB volume 18:421 0:000 This is SelfVolume !! 18:421 0:000 3. Volume: 18:421 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(2,GPT,210CD396-A50E-4459-809F-806BC3E02417,0x64028,0x1CA3BB0) 18:422 0:000 Result of bootcode detection: bootable unknown (legacy) 18:422 0:000 USB volume 18:422 0:000 4. Volume: 18:422 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0) 18:422 0:000 found optical drive 18:422 0:000 5. Volume: 18:422 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00) 18:424 0:001 Result of bootcode detection: bootable unknown (legacy) 18:424 0:000 6. Volume: 18:424 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02) 18:426 0:001 7. Volume: 18:426 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(1,GPT,0EC12D22-4440-45F3-8D5E-E391C997B42F,0x28,0x64000) 18:426 0:000 Result of bootcode detection: bootable Clover (clover) 18:427 0:000 8. Volume: 18:427 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(2,GPT,E27BFBDD-9F7E-4CF2-A5B8-8A9F98466AB1,0x64028,0x37E11D8) 18:428 0:000 9. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(3,GPT,073BE15C-342B-402B-8785-30D1674D83D6,0x3885200,0x36EB2B8) 18:428 0:000 10. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(4,GPT,D3398A0E-C09A-4491-97EF-F913506A3801,0x6F704B8,0x135F20) 18:428 0:000 11. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(5,GPT,8F1082D2-9984-4358-A5B8-7652C00BE561,0x70A63D8,0x36EB2B8) 18:428 0:000 12. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(6,GPT,A353112F-8573-4A2A-939D-E1E886FDC4E7,0xA791690,0x135F20) 18:428 0:000 13. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(7,GPT,86D154FF-2298-4DB5-B717-DD2677FBD063,0xA8C75B0,0x132B5DB8) 18:429 0:000 14. Volume: 18:429 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(8,GPT,000D40C9-3556-46D8-AADD-31F2800CB62F,0x1DB7D368,0x175F20) 18:429 0:000 15. Volume: 18:429 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02)\HD(1,GPT,973590F2-ED4B-4D0B-9C97-D0923C07B622,0x28,0x64000) 18:429 0:000 Result of bootcode detection: bootable unknown (legacy) 18:429 0:000 16. Volume: 18:429 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02)\HD(2,GPT,B241BA4F-327C-414C-AD6D-9A7F0188306A,0x64028,0xDEF0B60) 18:429 0:000 Choosing theme Pandora 18:429 0:000 Custom entries start 18:429 0:000 Custom entries finish 18:429 0:000 Scanning loaders... 18:429 0:000 0: 'Whole Disc Boot' no file system 18:429 0:000 1: 'Whole Disc Boot' no file system 18:429 0:000 2: 'EFI' 18:439 0:009 3: 'Install 10.12 Developer Preview' 18:444 0:005 AddLoaderEntry for Volume Name=Install 10.12 Developer Preview 18:597 0:152 4: 'Whole Disc Boot' no file system 18:597 0:000 5: 'Whole Disc Boot' no file system 18:597 0:000 6: 'Whole Disc Boot' no file system 18:597 0:000 7: 'EFI' 18:610 0:013 8: 'Lion' 18:610 0:000 AddLoaderEntry for Volume Name=Lion 18:610 0:000 Check if volume Is Hibernated: 18:610 0:000 Check sleep image 'by signature': 18:611 0:000 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 18:611 0:000 using default sleep image name = \private\var\vm\sleepimage 18:611 0:000 Reading first 512 bytes of sleepimage ... 18:611 0:000 Reading completed -> Success 18:611 0:000 sleepimage offset could not be acquired 18:611 0:000 hibernated: no - sign 18:622 0:011 9: 'Yosemite' 18:622 0:000 AddLoaderEntry for Volume Name=Yosemite 18:622 0:000 Check if volume Is Hibernated: 18:622 0:000 Check sleep image 'by signature': 18:623 0:000 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 18:623 0:000 using default sleep image name = \private\var\vm\sleepimage 18:623 0:000 Reading first 512 bytes of sleepimage ... 18:623 0:000 Reading completed -> Success 18:623 0:000 sleepimage offset could not be acquired 18:623 0:000 hibernated: no - sign 18:634 0:011 10: 'Recovery HD' 18:634 0:000 AddLoaderEntry for Volume Name=Recovery HD 18:645 0:010 11: 'Sierra' 18:645 0:000 AddLoaderEntry for Volume Name=Sierra 18:645 0:000 Check if volume Is Hibernated: 18:645 0:000 Check sleep image 'by signature': 18:645 0:000 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 18:645 0:000 using default sleep image name = \private\var\vm\sleepimage 18:645 0:000 Reading first 512 bytes of sleepimage ... 18:645 0:000 Reading completed -> Success 18:645 0:000 sleepimage offset could not be acquired 18:645 0:000 hibernated: no - sign 18:656 0:010 12: 'Recovery HD' 18:656 0:000 AddLoaderEntry for Volume Name=Recovery HD 18:666 0:009 13: 'El Capitan' 18:666 0:000 AddLoaderEntry for Volume Name=El Capitan 18:666 0:000 Check if volume Is Hibernated: 18:666 0:000 Check sleep image 'by signature': 18:666 0:000 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 18:666 0:000 SleepImage name from pref: ImageVolume = 'El Capitan', ImageName = '\private\var\vm\sleepimage' 18:667 0:000 Reading first 512 bytes of sleepimage ... 18:667 0:000 Reading completed -> Success 18:667 0:000 sleepimage offset could not be acquired 18:667 0:000 hibernated: no - sign 18:677 0:010 14: 'Recovery HD' 18:677 0:000 AddLoaderEntry for Volume Name=Recovery HD 18:687 0:010 15: 'EFI' 18:697 0:009 16: 'DATI' 18:707 0:010 Custom legacy start 18:707 0:000 Custom legacy end 18:707 0:000 Scanning legacy ... 18:707 0:000 0: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 1: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 2: 'EFI' (legacy) not legacy 18:707 0:000 3: 'Install 10.12 Developer Preview' (legacy) not legacy 18:707 0:000 4: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 5: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 6: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 7: 'EFI' (clover) add legacy 18:708 0:000 added 'Boot Clover from EFI' OSType=3 Icon=clover 18:708 0:000 8: 'Lion' (legacy) not legacy 18:708 0:000 9: 'Yosemite' (legacy) not legacy 18:708 0:000 10: 'Recovery HD' (legacy) not legacy 18:708 0:000 11: 'Sierra' (legacy) not legacy 18:708 0:000 12: 'Recovery HD' (legacy) not legacy 18:708 0:000 13: 'El Capitan' (legacy) not legacy 18:708 0:000 14: 'Recovery HD' (legacy) not legacy 18:708 0:000 15: 'EFI' (legacy) not legacy 18:708 0:000 16: 'DATI' (legacy) not legacy 18:708 0:000 Custom tool start 18:708 0:000 Custom tool end 18:708 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 18:708 0:000 Checking EFI partition Volume 2 for Clover 18:708 0:000 Found Clover 18:708 0:000 Use anime=Anim-Clover frames=96 18:708 0:000 Checking EFI partition Volume 7 for Clover 18:711 0:003 Found Clover 18:712 0:000 Use anime=Anim-Clover frames=96 18:712 0:000 Checking EFI partition Volume 15 for Clover 18:712 0:000 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 18:712 0:000 EfiBootVolume not found 18:712 0:000 found entry 6. 'Boot Mac OS X from El Capitan', Volume 'El Capitan', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(7,GPT,86D154FF-2298-4DB5-B717-DD2677FBD063,0xA8C75B0,0x132B5DB8)\System\Library\CoreServices\boot.efi' 18:712 0:000 DefaultIndex=6 and MainMenu.EntryCount=16 18:712 0:000 Use anime=Rotary_Logo frames=15 23:410 4:698 BootOption of the entry is empty 23:410 0:000 StartLoader() start 23:410 0:000 Entry->Settings: <null string> 23:410 0:000 Finally: Bus=99773kHz CPU=2494MHz 23:410 0:000 KernelAndKextPatches copyed to started entry 23:410 0:000 Kernel and Kext Patches at 915B8D98: 23:410 0:000 Allowed: y 23:410 0:000 Debug: n 23:410 0:000 KernelCpu: n 23:410 0:000 Lapic: y 23:410 0:000 Haswell-E: n 23:410 0:000 AICPUPM: y 23:410 0:000 AppleRTC: y 23:410 0:000 KernelPm: y 23:410 0:000 FakeCPUID: 0x0 23:410 0:000 ATIController: null 23:410 0:000 ATIDataLength: 0 23:410 0:000 0 Kexts to load 23:410 0:000 5 Kexts to patch 23:410 0:000 KextPatch[0]: 11 bytes, IOAHCIBlockStorage 23:410 0:000 KextPatch[1]: 7 bytes, AppleUSBXHCIPCI 23:410 0:000 KextPatch[2]: 4 bytes, AppleHDA 23:410 0:000 KextPatch[3]: 4 bytes, AppleHDA 23:410 0:000 KextPatch[4]: 4 bytes, AppleHDA 23:410 0:000 Loading boot.efi status=Success 23:478 0:068 GetOSVersion: : 10.12 23:478 0:000 insert table 9 for dev 0:0 23:478 0:000 insert table 9 for dev 0:0 23:478 0:000 insert table 9 for dev 0:0 23:478 0:000 Trusting SMBIOS... 23:478 0:000 Detected alternating SMBIOS channel banks 23:478 0:000 Channels: 2 23:478 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 23:478 0:000 partNum=16KTF51264HZ-1G6M1 23:478 0:000 SMBIOS Type 17 Index = 0 => 0 0: 23:478 0:000 BANK0 DIMM0 1600MHz 4096MB 23:478 0:000 partNum=16KTF51264HZ-1G6M1 23:478 0:000 SMBIOS Type 17 Index = 1 => 1 2: 23:478 0:000 BANK1 DIMM0 1600MHz 4096MB 23:478 0:000 mTotalSystemMemory = 8192 23:478 0:000 NumberOfMemoryDevices = 2 23:478 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000 23:478 0:000 Type20[1]->End = 0x3FFFFF, Type17[1] = 0x3000 23:478 0:000 Table 131 is present, CPUType=11 23:478 0:000 Change to: 604 23:478 0:000 RSDT 0x9AFFE124 23:478 0:000 FADT from RSDT: 0x9AFFB000 23:478 0:000 XSDT 0x9AFFE210 23:478 0:000 FADT from XSDT: 0x9AFFB000 23:478 0:000 Xsdt reallocation done 23:478 0:000 old FADT length=10C 23:478 0:000 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml 23:487 0:008 Apply DsdtFixMask=0x00000000 old way 23:487 0:000 drop _DSM mask=0xFFFF 23:487 0:000 ========= Auto patch DSDT Starting ======== 23:487 0:000 VideoCard devID=0xDE910DE 23:487 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 23:487 0:000 VideoCard devID=0x1668086 23:487 0:000 DisplayADR1[1] = 0x20000, DisplayADR2[1] = 0xFFFE 23:487 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE 23:487 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE 23:487 0:000 Audio HDA (addr:0x1B0000) setting specified layout-id=12 (0xC) 23:488 0:000 Found Airport Atheros at 0x1C0003, 0x0, DeviceID=0x002B 23:488 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE 23:488 0:000 first CPU found at 294B offset 294E 23:488 0:000 score candidate at 2947 23:488 0:000 score inserted in acpi_cpu_score _PR_ 23:488 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 within the score: _PR_ 23:488 0:000 Found PCIROOTUID = 0 23:488 0:000 ========= Auto patch DSDT Finished ======== 23:488 0:000 Patch table: SSDT 181D 23:488 0:000 SSDT len = 0x1068 23:488 0:000 Patch table: SSDT 181D 23:488 0:000 SSDT len = 0x968 23:488 0:000 Patch table: SSDT 181D 23:488 0:000 SSDT len = 0xA92 23:488 0:000 Patch table: SSDT 181D 23:488 0:000 SSDT len = 0x2E84 23:488 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0 23:488 0:000 Xsdt has tables count=17 23:488 0:000 corrected XSDT length=172 23:488 0:000 Start: Processing Patched AML(s): Unsorted 23:488 0:000 Inserting SSDT-6.aml from EFI\CLOVER\ACPI\patched ... Success 23:497 0:008 Inserting SSDT-1.aml from EFI\CLOVER\ACPI\patched ... Success 23:497 0:000 End: Processing Patched AML(s) 23:497 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8 23:497 0:000 Maximum control=0x19 23:497 0:000 Turbo control=0x1F 23:497 0:000 P-States: min 0x7, max 0x1F 23:497 0:000 SSDT with CPU P-States generated successfully 23:497 0:000 SSDT with CPU C-States generated successfully 23:497 0:000 EdidDiscovered size=128 23:497 0:000 00 | 00 FF FF FF FF FF FF 00 06 AF 9E 13 00 00 00 00 23:497 0:000 16 | 01 13 01 03 80 26 15 78 0A C4 95 9E 57 53 92 26 23:497 0:000 32 | 0F 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 23:497 0:000 48 | 01 01 01 01 01 01 1C 2A 40 6E 61 84 0C 30 30 20 23:497 0:000 64 | 36 00 7E D6 10 00 00 18 00 00 00 0F 00 00 00 00 23:497 0:000 80 | 00 00 00 00 00 00 00 00 00 20 00 00 00 FE 00 41 23:497 0:000 96 | 55 4F 0A 20 20 20 20 20 20 20 20 20 00 00 00 FE 23:497 0:000 112 | 00 42 31 37 33 52 57 30 31 20 56 33 20 0A 00 24 23:497 0:000 NVidia GFX injection not set 23:497 0:000 Intel Intel HD Graphics 4000 [8086:0166] :: PciRoot(0x0)\Pci(0x2,0x0) 23:497 0:000 Intel GFX revision =0x9 23:497 0:000 USB Controller [8086:1E31] :: PciRoot(0x0)\Pci(0x14,0x0) 23:497 0:000 USB Controller [8086:1E2D] :: PciRoot(0x0)\Pci(0x1A,0x0) 23:497 0:000 HDA Controller [8086:1E20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=12 (0xC) 23:497 0:000 LAN Controller [10EC:8168] :: PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0) 23:497 0:000 USB Controller [8086:1E26] :: PciRoot(0x0)\Pci(0x1D,0x0) 23:497 0:000 RCBA access disabled; trying to enable 23:497 0:000 stringlength = 2994 23:498 0:000 CurrentMode: Width=1600 Height=900 23:498 0:000 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 97546398 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 97546398 23:505 0:007 MSR 0x1B0 set to 00000000 23:505 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 23:509 0:004 Extra kext: EFI\CLOVER\kexts\Other\ACPIBatteryManager.kext 23:518 0:008 Extra kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext 23:526 0:008 Extra PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext\Contents\PlugIns\AppleACPIPS2Nub.kext 23:535 0:008 Extra PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext\Contents\PlugIns\ApplePS2Keyboard.kext 23:544 0:008 Extra PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext\Contents\PlugIns\ApplePS2Mouse.kext 23:548 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext\Contents\PlugIns\ApplePS2Trackpad.kext 23:562 0:013 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext 23:575 0:013 Extra kext: EFI\CLOVER\kexts\Other\WifiInjector.kext 23:576 0:001 Removed efi-boot-device-data variable: Not Found 23:576 0:000 Custom boot screen not used because entry has unset use graphics 23:576 0:000 Closing log But also I have my kext in SLE too so who can say.. 1 Link to comment Share on other sites More sharing options...
MattsCreative Posted June 14, 2016 Share Posted June 14, 2016 is the test version I made with both Sherlocks's patches. ...to be used on a USB pen drive (meaning don't replace your working one) I tried this out and it booted 10.12 without a issue thanks 1 Link to comment Share on other sites More sharing options...
Sherlocks Posted June 14, 2016 Share Posted June 14, 2016 Ok I tried: 0:100 0:100 MemLog inited, TSC freq: 2494332664 0:100 0:000 0:100 0:000 Now is 14.6.2016, 3:52:5 (GMT) 0:100 0:000 Starting Clover rev 3557 on INSYDE Corp. EFI 0:100 0:000 Build with: [Args: ./ebuild.sh -mc --no-usb -t XCODE5 | Command: build -D DISABLE_USB_SUPPORT -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -p Clover/Clover.dsc -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.11.6 | XCODE: 7.3.1] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) @97562618 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 Total Memory Slots Count = 2 0:100 0:000 Type 17 Index = 0 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/0, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 Bottom-Slot 1(top) 0:100 0:000 SmbiosTable.Type17->Vendor = Micron Technology 0:100 0:000 SmbiosTable.Type17->SerialNumber = EA70D331 0:100 0:000 SmbiosTable.Type17->PartNumber = 16KTF51264HZ-1G6M1 0:100 0:000 Type 17 Index = 1 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 Bottom-Slot 2(under) 0:100 0:000 SmbiosTable.Type17->Vendor = Micron Technology 0:100 0:000 SmbiosTable.Type17->SerialNumber = EA70D32F 0:100 0:000 SmbiosTable.Type17->PartNumber = 16KTF51264HZ-1G6M1 0:100 0:000 Boot status=0 0:100 0:000 Clover revision: 3557 running on HP Pavilion dv7 Notebook PC 0:100 0:000 ... with board 181D 0:100 0:000 CPU Vendor = 756E6547 Model=306A9 0:100 0:000 got cores from CPUID_1 = 0 0:100 0:000 The CPU supported turbo 0:100 0:000 BrandString = Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz 0:100 0:000 MSR 0xE2 before patch 1E008404 0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on 0:100 0:000 MSR 0xE4 00020414 0:100 0:000 MSR 0xCE 00080C10_E0011900 0:100 0:000 non-usable FLEX_RATIO = 110000 0:100 0:000 corrected FLEX_RATIO = 100000 0:100 0:000 MSR 0x1B0 00000000 0:100 0:000 FSBFrequency=100MHz DMIvalue=100000kHz 0:100 0:000 Corrected FSBFrequency=100MHz 0:100 0:000 Vendor/Model/Stepping: 0x756E6547/0x3A/0x9 0:100 0:000 Family/ExtFamily: 0x6/0x0 0:100 0:000 MaxDiv/MinDiv: 25.0/12 0:100 0:000 Turbo: 29/29/29/31 0:100 0:000 Features: 0xBFEBFBFF 0:100 0:000 Threads: 4 0:100 0:000 Cores: 2 0:100 0:000 FSB: 100 MHz 0:100 0:000 CPU: 2500 MHz 0:100 0:000 TSC: 2500 MHz 0:100 0:000 PIS: 400 MHz 0:100 0:000 PCI (00|00:00.00) : 8086 0154 class=060000 0:100 0:000 PCI (00|00:01.00) : 8086 0151 class=060400 0:100 0:000 PCI (00|01:00.00) : 10DE 0DE9 class=030000 0:100 0:000 Found NVidia model=HP GeForce GT 630M family C1 0:100 0:000 PCI (00|01:00.01) : FFFF FFFF class=FFFFFF 0:100 0:000 PCI (00|00:02.00) : 8086 0166 class=030000 0:100 0:000 Found GFX model=Intel HD Graphics 4000 0:100 0:000 PCI (00|00:14.00) : 8086 1E31 class=0C0330 0:100 0:000 PCI (00|00:16.00) : 8086 1E3A class=078000 0:100 0:000 PCI (00|00:1A.00) : 8086 1E2D class=0C0320 0:100 0:000 PCI (00|00:1B.00) : 8086 1E20 class=040300 0:100 0:000 PCI (00|00:1C.00) : 8086 1E10 class=060400 0:100 0:000 PCI (00|00:1C.01) : 8086 1E12 class=060400 0:100 0:000 PCI (00|08:00.00) : 10EC 5229 class=FF0000 0:100 0:000 PCI (00|00:1C.03) : 8086 1E16 class=060400 0:100 0:000 PCI (00|0A:00.00) : 168C 002B class=028000 0:100 0:000 PCI (00|00:1C.05) : 8086 1E1A class=060400 0:100 0:000 PCI (00|0B:00.00) : 10EC 8168 class=020000 0:100 0:000 LAN 0, Vendor=10EC, MMIO=2000 0:100 0:000 PCI (00|00:1D.00) : 8086 1E26 class=0C0320 0:100 0:000 PCI (00|00:1F.00) : 8086 1E57 class=060100 0:100 0:000 PCI (00|00:1F.02) : 8086 282A class=010400 0:100 0:000 PCI (00|00:1F.03) : 8086 1E22 class=0C0500 0:100 0:000 PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF 0:100 0:000 Clover load options size = 2 bytes 0:100 0:000 Found Plist String = , parse XML in LoadOptions 0:100 0:000 Xml in load options is bad 0:113 0:013 Using OEM config.plist at path: EFI\CLOVER\config.plist 0:114 0:000 EFI\CLOVER\config.plist loaded: Success 0:121 0:007 Found theme directory: Pandora 0:135 0:013 Found theme directory: embedded 0:139 0:004 Found theme directory: random 0:139 0:000 Loading early settings 0:139 0:000 timeout set to 5 0:139 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:139 0:000 KextsToPatch: 5 requested 0:139 0:000 KextsToPatch 0: IOAHCIBlockStorage (Enable TRIM for SSD) Kext bin patch, data len: 11 0:139 0:000 KextsToPatch 1: AppleUSBXHCIPCI (remove usb limit) Kext bin patch, data len: 7 0:139 0:000 KextsToPatch 2: AppleHDA (Zeroing 11d41984 codec) Kext bin patch, data len: 4 0:139 0:000 KextsToPatch 3: AppleHDA (Patching 11d4198b with 111d76e0 codec) Kext bin patch, data len: 4 0:139 0:000 KextsToPatch 4: AppleHDA (Zeroing 11d41983 codec) Kext bin patch, data len: 4 0:139 0:000 Default theme: Pandora 0:139 0:000 Hiding entries with string Windows 0:139 0:000 Hiding entries with string BOOTX64.EFI 0:139 0:000 LoadDrivers() start 0:144 0:004 Loading FSInject-64.efi status=Success 0:148 0:004 Loading OsxFatBinaryDrv-64.efi status=Success 0:148 0:000 Loading HFSPlus-64.efi status=Success 0:153 0:004 - driver needs connecting 0:153 0:000 1 drivers needs connecting ... 0:153 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:153 0:000 HFS+ driver loaded 0:153 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:316 0:163 LoadDrivers() end 0:316 0:000 Dump SMC keys from NVRAM: 0:320 0:003 SetMaxResolution: found best mode 0: 1600x900 0:320 0:000 - already set 0:320 0:000 Console modes reported: 4, available modes: 0:320 0:000 Mode 1: 80x25 0:320 0:000 Mode 3: 100x31 0:320 0:000 Mode 4: 128x40 (current mode) 0:320 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) 0:320 0:000 ScanSPD() start 0:321 0:000 SMBus device : 8086 1E22 class=0C0500 status=Success 0:321 0:000 SMBus CmdReg: 0x3 0:321 0:000 Scanning SMBus [8086:1E22], mmio: 0xD4615004, ioport: 0x5040, hostc: 0x1 0:321 0:000 Slots to scan [8]... 0:321 0:000 SPD[0]: Type 11 @0x50 0:340 0:019 Not using XMP because it is not present 0:340 0:000 DDR speed 1600MHz 0:340 0:000 Slot: 0 Type 24 4096MB 1600MHz Vendor=Micron Technology PartNo=16KTF51264HZ-1G6M1M1 SerialNo=0E0A07000D030301 0:341 0:000 SPD[2]: Type 11 @0x52 0:360 0:019 Not using XMP because it is not present 0:360 0:000 DDR speed 1600MHz 0:360 0:000 Slot: 2 Type 24 4096MB 1600MHz Vendor=Micron Technology PartNo=16KTF51264HZ-1G6M1M1 SerialNo=0E0A07000D03020F 0:360 0:000 ScanSPD() end 0:361 0:000 Get Acpi Tables List from RSDT: 0:361 0:000 Found table: FACP SLIC-MPC len=268 0:361 0:000 Found table: UEFI 181D len=566 0:361 0:000 Found table: ASF! 181D len=165 0:361 0:000 Found table: HPET 181D len=56 0:361 0:000 Found table: APIC 181D len=140 0:361 0:000 Found table: MCFG 181D len=60 0:361 0:000 Found table: SLIC SLIC-MPC len=374 0:361 0:000 Found table: WDAT 181D len=548 0:361 0:000 Found table: SSDT 181D len=4200 0:361 0:000 Found table: BOOT 181D len=40 0:361 0:000 Found table: ASPT 181D len=52 0:361 0:000 Found table: DBGP 181D len=52 0:361 0:000 Found table: FPDT 181D len=68 0:361 0:000 Found table: SSDT 181D len=2408 0:361 0:000 Found table: SSDT 181D len=2706 0:361 0:000 Found table: SSDT 181D len=11908 0:361 0:000 Found table: BGRT 181D len=56 0:361 0:000 Calibrated TSC frequency =2494332664 =2494MHz 0:361 0:000 Loading main settings 0:361 0:000 USB FixOwnership: true 0:361 0:000 Dropping 3 tables 0:361 0:000 Drop table 0 signature="SSDT" (54445353) length=11623(0x1A) 0:361 0:000 set table: 54445353, 0 to drop: 0:361 0:000 Drop table 1 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043) 0:361 0:000 set table: 54445353, 6D50757043 to drop: 0:361 0:000 Drop table 2 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043) 0:361 0:000 set table: 54445353, 74734930757043 to drop: 0:361 0:000 Config set Fixes will override FixMask mask! 0:361 0:000 final mask=00000000 0:361 0:000 Config set EnableC7: - 0:361 0:000 Config set EnableC6: + 0:361 0:000 Config set EnableC4: - 0:361 0:000 Config set EnableC2: - 0:361 0:000 Config set ChassisType=0x8 0:368 0:007 found 17 volumes with blockIO 0:368 0:000 0. Volume: 0:368 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0) 0:369 0:000 Result of bootcode detection: bootable unknown (legacy) 0:369 0:000 USB volume 0:369 0:000 1. Volume: 0:369 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x1) 0:369 0:000 USB volume 0:369 0:000 2. Volume: 0:369 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) 0:370 0:001 Result of bootcode detection: bootable unknown (legacy) 0:370 0:000 USB volume 0:373 0:002 This is SelfVolume !! 0:373 0:000 3. Volume: 0:373 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(2,GPT,210CD396-A50E-4459-809F-806BC3E02417,0x64028,0x1CA3BB0) 0:374 0:001 Result of bootcode detection: bootable unknown (legacy) 0:374 0:000 USB volume 0:374 0:000 4. Volume: 0:374 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0) 0:374 0:000 found optical drive 0:374 0:000 5. Volume: 0:374 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00) 0:376 0:001 Result of bootcode detection: bootable unknown (legacy) 0:376 0:000 6. Volume: 0:376 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02) 0:377 0:001 7. Volume: 0:377 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(1,GPT,0EC12D22-4440-45F3-8D5E-E391C997B42F,0x28,0x64000) 0:377 0:000 Result of bootcode detection: bootable Clover (clover) 0:377 0:000 8. Volume: 0:377 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(2,GPT,E27BFBDD-9F7E-4CF2-A5B8-8A9F98466AB1,0x64028,0x37E11D8) 0:377 0:000 9. Volume: 0:377 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(3,GPT,073BE15C-342B-402B-8785-30D1674D83D6,0x3885200,0x36EB2B8) 0:377 0:000 10. Volume: 0:377 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(4,GPT,D3398A0E-C09A-4491-97EF-F913506A3801,0x6F704B8,0x135F20) 0:378 0:000 11. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(5,GPT,8F1082D2-9984-4358-A5B8-7652C00BE561,0x70A63D8,0x36EB2B8) 0:378 0:000 12. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(6,GPT,A353112F-8573-4A2A-939D-E1E886FDC4E7,0xA791690,0x135F20) 0:378 0:000 13. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(7,GPT,86D154FF-2298-4DB5-B717-DD2677FBD063,0xA8C75B0,0x132B5DB8) 0:378 0:000 14. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(8,GPT,000D40C9-3556-46D8-AADD-31F2800CB62F,0x1DB7D368,0x175F20) 0:378 0:000 15. Volume: 0:378 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02)\HD(1,GPT,973590F2-ED4B-4D0B-9C97-D0923C07B622,0x28,0x64000) 0:379 0:000 Result of bootcode detection: bootable unknown (legacy) 0:379 0:000 16. Volume: 0:379 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02)\HD(2,GPT,B241BA4F-327C-414C-AD6D-9A7F0188306A,0x64028,0xDEF0B60) 0:379 0:000 Using theme 'Pandora' (EFI\CLOVER\themes\Pandora) 0:379 0:000 OS main and drive as badge 0:382 0:002 Choosing theme Pandora 0:382 0:000 Custom entries start 0:382 0:000 Custom entries finish 0:382 0:000 Scanning loaders... 0:382 0:000 0: 'Whole Disc Boot' no file system 0:382 0:000 1: 'Whole Disc Boot' no file system 0:382 0:000 2: 'EFI' 0:401 0:018 3: 'Install 10.12 Developer Preview' 0:403 0:002 AddLoaderEntry for Volume Name=Install 10.12 Developer Preview 0:555 0:151 4: 'Whole Disc Boot' no file system 0:555 0:000 5: 'Whole Disc Boot' no file system 0:555 0:000 6: 'Whole Disc Boot' no file system 0:555 0:000 7: 'EFI' 0:578 0:023 8: 'Lion' 0:579 0:001 AddLoaderEntry for Volume Name=Lion 0:581 0:001 Check if volume Is Hibernated: 0:581 0:000 Check sleep image 'by signature': 0:583 0:002 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 0:583 0:000 using default sleep image name = \private\var\vm\sleepimage 0:584 0:000 Reading first 512 bytes of sleepimage ... 0:585 0:000 OurBlockIoRead: Lba=E289F8, Offset=1C513F000 (BlockSize=512) 0:585 0:000 sig lion: 7A7A7A7A 0:585 0:000 sig snow: 0 0:585 0:000 no valid sleep image offset was found 0:585 0:000 Reading completed -> Success 0:585 0:000 sleepimage offset could not be acquired 0:585 0:000 hibernated: no - sign 0:586 0:000 Icon 17 (icons\vol_internal_hfs.icns) not found 0:586 0:000 Theme path EFI\CLOVER\themes\Pandora, ThemeDir=972A4F20 0:597 0:011 9: 'Yosemite' 0:598 0:000 AddLoaderEntry for Volume Name=Yosemite 0:599 0:001 Check if volume Is Hibernated: 0:599 0:000 Check sleep image 'by signature': 0:600 0:001 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 0:600 0:000 using default sleep image name = \private\var\vm\sleepimage 0:601 0:000 Reading first 512 bytes of sleepimage ... 0:602 0:000 OurBlockIoRead: Lba=49F56B8, Offset=93EAD7000 (BlockSize=512) 0:602 0:000 sig lion: 7A7A7A7A 0:602 0:000 sig snow: 0 0:602 0:000 no valid sleep image offset was found 0:602 0:000 Reading completed -> Success 0:602 0:000 sleepimage offset could not be acquired 0:602 0:000 hibernated: no - sign 0:613 0:011 10: 'Recovery HD' 0:614 0:000 AddLoaderEntry for Volume Name=Recovery HD 0:630 0:016 11: 'Sierra' 0:631 0:001 AddLoaderEntry for Volume Name=Sierra 0:632 0:001 Check if volume Is Hibernated: 0:632 0:000 Check sleep image 'by signature': 0:633 0:001 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 0:633 0:000 using default sleep image name = \private\var\vm\sleepimage 0:635 0:001 Reading first 512 bytes of sleepimage ... 0:635 0:000 OurBlockIoRead: Lba=83AF3F0, Offset=1075E7E000 (BlockSize=512) 0:635 0:000 sig lion: 0 0:635 0:000 sig snow: 0 0:635 0:000 no valid sleep image offset was found 0:635 0:000 Reading completed -> Success 0:635 0:000 sleepimage offset could not be acquired 0:635 0:000 hibernated: no - sign 0:645 0:010 12: 'Recovery HD' 0:645 0:000 AddLoaderEntry for Volume Name=Recovery HD 0:655 0:010 13: 'El Capitan' 0:657 0:001 AddLoaderEntry for Volume Name=El Capitan 0:659 0:001 Check if volume Is Hibernated: 0:659 0:000 Check sleep image 'by signature': 0:661 0:002 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 0:661 0:000 SleepImage name from pref: ImageVolume = 'El Capitan', ImageName = '\private\var\vm\sleepimage' 0:663 0:001 Reading first 512 bytes of sleepimage ... 0:663 0:000 OurBlockIoRead: Lba=D8C7668, Offset=1B18ECD000 (BlockSize=512) 0:663 0:000 sig lion: 7A7A7A7A 0:663 0:000 sig snow: 0 0:663 0:000 no valid sleep image offset was found 0:663 0:000 Reading completed -> Success 0:663 0:000 sleepimage offset could not be acquired 0:663 0:000 hibernated: no - sign 0:678 0:015 14: 'Recovery HD' 0:679 0:000 AddLoaderEntry for Volume Name=Recovery HD 0:689 0:010 15: 'EFI' 0:698 0:009 16: 'DATI' 0:709 0:010 Custom legacy start 0:709 0:000 Custom legacy end 0:709 0:000 Scanning legacy ... 0:709 0:000 0: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 1: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 2: 'EFI' (legacy) not legacy 0:709 0:000 3: 'Install 10.12 Developer Preview' (legacy) not legacy 0:709 0:000 4: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 5: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 6: 'Whole Disc Boot' (legacy) not legacy 0:709 0:000 7: 'EFI' (clover) add legacy 0:710 0:001 added 'Boot Clover from EFI' OSType=3 Icon=clover 0:710 0:000 8: 'Lion' (legacy) not legacy 0:710 0:000 9: 'Yosemite' (legacy) not legacy 0:710 0:000 10: 'Recovery HD' (legacy) not legacy 0:710 0:000 11: 'Sierra' (legacy) not legacy 0:710 0:000 12: 'Recovery HD' (legacy) not legacy 0:710 0:000 13: 'El Capitan' (legacy) not legacy 0:710 0:000 14: 'Recovery HD' (legacy) not legacy 0:710 0:000 15: 'EFI' (legacy) not legacy 0:710 0:000 16: 'DATI' (legacy) not legacy 0:710 0:000 Custom tool start 0:710 0:000 Custom tool end 0:715 0:004 found tool \EFI\CLOVER\tools\Shell64U.efi 0:715 0:000 Checking EFI partition Volume 2 for Clover 0:715 0:000 Found Clover 0:715 0:000 Use anime=Anim-Clover frames=96 0:715 0:000 Checking EFI partition Volume 7 for Clover 0:717 0:001 Found Clover 0:717 0:000 Use anime=Anim-Clover frames=96 0:717 0:000 Checking EFI partition Volume 15 for Clover 0:719 0:001 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 0:719 0:000 EfiBootVolume not found 0:719 0:000 found entry 6. 'Boot Mac OS X from El Capitan', Volume 'El Capitan', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(7,GPT,86D154FF-2298-4DB5-B717-DD2677FBD063,0xA8C75B0,0x132B5DB8)\System\Library\CoreServices\boot.efi' 0:719 0:000 DefaultIndex=6 and MainMenu.EntryCount=16 0:719 0:000 Use anime=Rotary_Logo frames=15 1:253 0:534 Found Mouse device: 1:254 0:000 GUI ready 9:641 8:386 Use anime=Anim-Options frames=96 16:277 6:636 EDITED: kext-dev-mode=1 -v cpus=1 18:419 2:142 ReinitSelfLib after theme change 18:419 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) 18:419 0:000 found 17 volumes with blockIO 18:419 0:000 0. Volume: 18:419 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0) 18:420 0:000 Result of bootcode detection: bootable unknown (legacy) 18:420 0:000 USB volume 18:420 0:000 1. Volume: 18:420 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x1) 18:420 0:000 USB volume 18:420 0:000 2. Volume: 18:420 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(1,GPT,45B3683B-8E4A-4C99-BA67-D538EDD9B28B,0x28,0x64000) 18:421 0:001 Result of bootcode detection: bootable unknown (legacy) 18:421 0:000 USB volume 18:421 0:000 This is SelfVolume !! 18:421 0:000 3. Volume: 18:421 0:000 PciRoot(0x0)\Pci(0x14,0x0)\USB(0x3,0x0)\Unit(0x0)\HD(2,GPT,210CD396-A50E-4459-809F-806BC3E02417,0x64028,0x1CA3BB0) 18:422 0:000 Result of bootcode detection: bootable unknown (legacy) 18:422 0:000 USB volume 18:422 0:000 4. Volume: 18:422 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0) 18:422 0:000 found optical drive 18:422 0:000 5. Volume: 18:422 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00) 18:424 0:001 Result of bootcode detection: bootable unknown (legacy) 18:424 0:000 6. Volume: 18:424 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02) 18:426 0:001 7. Volume: 18:426 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(1,GPT,0EC12D22-4440-45F3-8D5E-E391C997B42F,0x28,0x64000) 18:426 0:000 Result of bootcode detection: bootable Clover (clover) 18:427 0:000 8. Volume: 18:427 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(2,GPT,E27BFBDD-9F7E-4CF2-A5B8-8A9F98466AB1,0x64028,0x37E11D8) 18:428 0:000 9. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(3,GPT,073BE15C-342B-402B-8785-30D1674D83D6,0x3885200,0x36EB2B8) 18:428 0:000 10. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(4,GPT,D3398A0E-C09A-4491-97EF-F913506A3801,0x6F704B8,0x135F20) 18:428 0:000 11. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(5,GPT,8F1082D2-9984-4358-A5B8-7652C00BE561,0x70A63D8,0x36EB2B8) 18:428 0:000 12. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(6,GPT,A353112F-8573-4A2A-939D-E1E886FDC4E7,0xA791690,0x135F20) 18:428 0:000 13. Volume: 18:428 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(7,GPT,86D154FF-2298-4DB5-B717-DD2677FBD063,0xA8C75B0,0x132B5DB8) 18:429 0:000 14. Volume: 18:429 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(8,GPT,000D40C9-3556-46D8-AADD-31F2800CB62F,0x1DB7D368,0x175F20) 18:429 0:000 15. Volume: 18:429 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02)\HD(1,GPT,973590F2-ED4B-4D0B-9C97-D0923C07B622,0x28,0x64000) 18:429 0:000 Result of bootcode detection: bootable unknown (legacy) 18:429 0:000 16. Volume: 18:429 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,02)\HD(2,GPT,B241BA4F-327C-414C-AD6D-9A7F0188306A,0x64028,0xDEF0B60) 18:429 0:000 Choosing theme Pandora 18:429 0:000 Custom entries start 18:429 0:000 Custom entries finish 18:429 0:000 Scanning loaders... 18:429 0:000 0: 'Whole Disc Boot' no file system 18:429 0:000 1: 'Whole Disc Boot' no file system 18:429 0:000 2: 'EFI' 18:439 0:009 3: 'Install 10.12 Developer Preview' 18:444 0:005 AddLoaderEntry for Volume Name=Install 10.12 Developer Preview 18:597 0:152 4: 'Whole Disc Boot' no file system 18:597 0:000 5: 'Whole Disc Boot' no file system 18:597 0:000 6: 'Whole Disc Boot' no file system 18:597 0:000 7: 'EFI' 18:610 0:013 8: 'Lion' 18:610 0:000 AddLoaderEntry for Volume Name=Lion 18:610 0:000 Check if volume Is Hibernated: 18:610 0:000 Check sleep image 'by signature': 18:611 0:000 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 18:611 0:000 using default sleep image name = \private\var\vm\sleepimage 18:611 0:000 Reading first 512 bytes of sleepimage ... 18:611 0:000 Reading completed -> Success 18:611 0:000 sleepimage offset could not be acquired 18:611 0:000 hibernated: no - sign 18:622 0:011 9: 'Yosemite' 18:622 0:000 AddLoaderEntry for Volume Name=Yosemite 18:622 0:000 Check if volume Is Hibernated: 18:622 0:000 Check sleep image 'by signature': 18:623 0:000 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 18:623 0:000 using default sleep image name = \private\var\vm\sleepimage 18:623 0:000 Reading first 512 bytes of sleepimage ... 18:623 0:000 Reading completed -> Success 18:623 0:000 sleepimage offset could not be acquired 18:623 0:000 hibernated: no - sign 18:634 0:011 10: 'Recovery HD' 18:634 0:000 AddLoaderEntry for Volume Name=Recovery HD 18:645 0:010 11: 'Sierra' 18:645 0:000 AddLoaderEntry for Volume Name=Sierra 18:645 0:000 Check if volume Is Hibernated: 18:645 0:000 Check sleep image 'by signature': 18:645 0:000 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 18:645 0:000 using default sleep image name = \private\var\vm\sleepimage 18:645 0:000 Reading first 512 bytes of sleepimage ... 18:645 0:000 Reading completed -> Success 18:645 0:000 sleepimage offset could not be acquired 18:645 0:000 hibernated: no - sign 18:656 0:010 12: 'Recovery HD' 18:656 0:000 AddLoaderEntry for Volume Name=Recovery HD 18:666 0:009 13: 'El Capitan' 18:666 0:000 AddLoaderEntry for Volume Name=El Capitan 18:666 0:000 Check if volume Is Hibernated: 18:666 0:000 Check sleep image 'by signature': 18:666 0:000 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 18:666 0:000 SleepImage name from pref: ImageVolume = 'El Capitan', ImageName = '\private\var\vm\sleepimage' 18:667 0:000 Reading first 512 bytes of sleepimage ... 18:667 0:000 Reading completed -> Success 18:667 0:000 sleepimage offset could not be acquired 18:667 0:000 hibernated: no - sign 18:677 0:010 14: 'Recovery HD' 18:677 0:000 AddLoaderEntry for Volume Name=Recovery HD 18:687 0:010 15: 'EFI' 18:697 0:009 16: 'DATI' 18:707 0:010 Custom legacy start 18:707 0:000 Custom legacy end 18:707 0:000 Scanning legacy ... 18:707 0:000 0: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 1: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 2: 'EFI' (legacy) not legacy 18:707 0:000 3: 'Install 10.12 Developer Preview' (legacy) not legacy 18:707 0:000 4: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 5: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 6: 'Whole Disc Boot' (legacy) not legacy 18:707 0:000 7: 'EFI' (clover) add legacy 18:708 0:000 added 'Boot Clover from EFI' OSType=3 Icon=clover 18:708 0:000 8: 'Lion' (legacy) not legacy 18:708 0:000 9: 'Yosemite' (legacy) not legacy 18:708 0:000 10: 'Recovery HD' (legacy) not legacy 18:708 0:000 11: 'Sierra' (legacy) not legacy 18:708 0:000 12: 'Recovery HD' (legacy) not legacy 18:708 0:000 13: 'El Capitan' (legacy) not legacy 18:708 0:000 14: 'Recovery HD' (legacy) not legacy 18:708 0:000 15: 'EFI' (legacy) not legacy 18:708 0:000 16: 'DATI' (legacy) not legacy 18:708 0:000 Custom tool start 18:708 0:000 Custom tool end 18:708 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 18:708 0:000 Checking EFI partition Volume 2 for Clover 18:708 0:000 Found Clover 18:708 0:000 Use anime=Anim-Clover frames=96 18:708 0:000 Checking EFI partition Volume 7 for Clover 18:711 0:003 Found Clover 18:712 0:000 Use anime=Anim-Clover frames=96 18:712 0:000 Checking EFI partition Volume 15 for Clover 18:712 0:000 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 18:712 0:000 EfiBootVolume not found 18:712 0:000 found entry 6. 'Boot Mac OS X from El Capitan', Volume 'El Capitan', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,00)\HD(7,GPT,86D154FF-2298-4DB5-B717-DD2677FBD063,0xA8C75B0,0x132B5DB8)\System\Library\CoreServices\boot.efi' 18:712 0:000 DefaultIndex=6 and MainMenu.EntryCount=16 18:712 0:000 Use anime=Rotary_Logo frames=15 23:410 4:698 BootOption of the entry is empty 23:410 0:000 StartLoader() start 23:410 0:000 Entry->Settings: <null string> 23:410 0:000 Finally: Bus=99773kHz CPU=2494MHz 23:410 0:000 KernelAndKextPatches copyed to started entry 23:410 0:000 Kernel and Kext Patches at 915B8D98: 23:410 0:000 Allowed: y 23:410 0:000 Debug: n 23:410 0:000 KernelCpu: n 23:410 0:000 Lapic: y 23:410 0:000 Haswell-E: n 23:410 0:000 AICPUPM: y 23:410 0:000 AppleRTC: y 23:410 0:000 KernelPm: y 23:410 0:000 FakeCPUID: 0x0 23:410 0:000 ATIController: null 23:410 0:000 ATIDataLength: 0 23:410 0:000 0 Kexts to load 23:410 0:000 5 Kexts to patch 23:410 0:000 KextPatch[0]: 11 bytes, IOAHCIBlockStorage 23:410 0:000 KextPatch[1]: 7 bytes, AppleUSBXHCIPCI 23:410 0:000 KextPatch[2]: 4 bytes, AppleHDA 23:410 0:000 KextPatch[3]: 4 bytes, AppleHDA 23:410 0:000 KextPatch[4]: 4 bytes, AppleHDA 23:410 0:000 Loading boot.efi status=Success 23:478 0:068 GetOSVersion: : 10.12 23:478 0:000 insert table 9 for dev 0:0 23:478 0:000 insert table 9 for dev 0:0 23:478 0:000 insert table 9 for dev 0:0 23:478 0:000 Trusting SMBIOS... 23:478 0:000 Detected alternating SMBIOS channel banks 23:478 0:000 Channels: 2 23:478 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 23:478 0:000 partNum=16KTF51264HZ-1G6M1 23:478 0:000 SMBIOS Type 17 Index = 0 => 0 0: 23:478 0:000 BANK0 DIMM0 1600MHz 4096MB 23:478 0:000 partNum=16KTF51264HZ-1G6M1 23:478 0:000 SMBIOS Type 17 Index = 1 => 1 2: 23:478 0:000 BANK1 DIMM0 1600MHz 4096MB 23:478 0:000 mTotalSystemMemory = 8192 23:478 0:000 NumberOfMemoryDevices = 2 23:478 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000 23:478 0:000 Type20[1]->End = 0x3FFFFF, Type17[1] = 0x3000 23:478 0:000 Table 131 is present, CPUType=11 23:478 0:000 Change to: 604 23:478 0:000 RSDT 0x9AFFE124 23:478 0:000 FADT from RSDT: 0x9AFFB000 23:478 0:000 XSDT 0x9AFFE210 23:478 0:000 FADT from XSDT: 0x9AFFB000 23:478 0:000 Xsdt reallocation done 23:478 0:000 old FADT length=10C 23:478 0:000 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml 23:487 0:008 Apply DsdtFixMask=0x00000000 old way 23:487 0:000 drop _DSM mask=0xFFFF 23:487 0:000 ========= Auto patch DSDT Starting ======== 23:487 0:000 VideoCard devID=0xDE910DE 23:487 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 23:487 0:000 VideoCard devID=0x1668086 23:487 0:000 DisplayADR1[1] = 0x20000, DisplayADR2[1] = 0xFFFE 23:487 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE 23:487 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE 23:487 0:000 Audio HDA (addr:0x1B0000) setting specified layout-id=12 (0xC) 23:488 0:000 Found Airport Atheros at 0x1C0003, 0x0, DeviceID=0x002B 23:488 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE 23:488 0:000 first CPU found at 294B offset 294E 23:488 0:000 score candidate at 2947 23:488 0:000 score inserted in acpi_cpu_score _PR_ 23:488 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 within the score: _PR_ 23:488 0:000 Found PCIROOTUID = 0 23:488 0:000 ========= Auto patch DSDT Finished ======== 23:488 0:000 Patch table: SSDT 181D 23:488 0:000 SSDT len = 0x1068 23:488 0:000 Patch table: SSDT 181D 23:488 0:000 SSDT len = 0x968 23:488 0:000 Patch table: SSDT 181D 23:488 0:000 SSDT len = 0xA92 23:488 0:000 Patch table: SSDT 181D 23:488 0:000 SSDT len = 0x2E84 23:488 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0 23:488 0:000 Xsdt has tables count=17 23:488 0:000 corrected XSDT length=172 23:488 0:000 Start: Processing Patched AML(s): Unsorted 23:488 0:000 Inserting SSDT-6.aml from EFI\CLOVER\ACPI\patched ... Success 23:497 0:008 Inserting SSDT-1.aml from EFI\CLOVER\ACPI\patched ... Success 23:497 0:000 End: Processing Patched AML(s) 23:497 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8 23:497 0:000 Maximum control=0x19 23:497 0:000 Turbo control=0x1F 23:497 0:000 P-States: min 0x7, max 0x1F 23:497 0:000 SSDT with CPU P-States generated successfully 23:497 0:000 SSDT with CPU C-States generated successfully 23:497 0:000 EdidDiscovered size=128 23:497 0:000 00 | 00 FF FF FF FF FF FF 00 06 AF 9E 13 00 00 00 00 23:497 0:000 16 | 01 13 01 03 80 26 15 78 0A C4 95 9E 57 53 92 26 23:497 0:000 32 | 0F 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 23:497 0:000 48 | 01 01 01 01 01 01 1C 2A 40 6E 61 84 0C 30 30 20 23:497 0:000 64 | 36 00 7E D6 10 00 00 18 00 00 00 0F 00 00 00 00 23:497 0:000 80 | 00 00 00 00 00 00 00 00 00 20 00 00 00 FE 00 41 23:497 0:000 96 | 55 4F 0A 20 20 20 20 20 20 20 20 20 00 00 00 FE 23:497 0:000 112 | 00 42 31 37 33 52 57 30 31 20 56 33 20 0A 00 24 23:497 0:000 NVidia GFX injection not set 23:497 0:000 Intel Intel HD Graphics 4000 [8086:0166] :: PciRoot(0x0)\Pci(0x2,0x0) 23:497 0:000 Intel GFX revision =0x9 23:497 0:000 USB Controller [8086:1E31] :: PciRoot(0x0)\Pci(0x14,0x0) 23:497 0:000 USB Controller [8086:1E2D] :: PciRoot(0x0)\Pci(0x1A,0x0) 23:497 0:000 HDA Controller [8086:1E20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=12 (0xC) 23:497 0:000 LAN Controller [10EC:8168] :: PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0) 23:497 0:000 USB Controller [8086:1E26] :: PciRoot(0x0)\Pci(0x1D,0x0) 23:497 0:000 RCBA access disabled; trying to enable 23:497 0:000 stringlength = 2994 23:498 0:000 CurrentMode: Width=1600 Height=900 23:498 0:000 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 97546398 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 97546398 23:505 0:007 MSR 0x1B0 set to 00000000 23:505 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 23:509 0:004 Extra kext: EFI\CLOVER\kexts\Other\ACPIBatteryManager.kext 23:518 0:008 Extra kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext 23:526 0:008 Extra PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext\Contents\PlugIns\AppleACPIPS2Nub.kext 23:535 0:008 Extra PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext\Contents\PlugIns\ApplePS2Keyboard.kext 23:544 0:008 Extra PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext\Contents\PlugIns\ApplePS2Mouse.kext 23:548 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2Controller.kext\Contents\PlugIns\ApplePS2Trackpad.kext 23:562 0:013 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext 23:575 0:013 Extra kext: EFI\CLOVER\kexts\Other\WifiInjector.kext 23:576 0:001 Removed efi-boot-device-data variable: Not Found 23:576 0:000 Custom boot screen not used because entry has unset use graphics 23:576 0:000 Closing log But also I have my kext in SLE too so who can say.. nice go sleep now. you have to sleep im still getting early reboot. so i cant say for sure. gonna report soon. thanks. my skylake laptop have early reboot. i use createinstallmedia 3 Link to comment Share on other sites More sharing options...
polyzargone Posted June 14, 2016 Share Posted June 14, 2016 Well… But there's something that worries me a bit : That said, unidentified apps seems to work fine 1 Link to comment Share on other sites More sharing options...
mendietinha Posted June 14, 2016 Share Posted June 14, 2016 Try to mount also the BaseSystem.dmg by clicking it, and retry... around 80% i get this error: installer: The OS Install failed with error: Error Domain=PKInstallErrorDomain Code=121 "Ocorreu um erro ao atualizar as informações de extensão do sistema." UserInfo={arguments=( "-update-volume", "/Volumes/MacOS 10.12", "-Installer" ), NSLocalizedDescription=Ocorreu um erro ao atualizar as informações de extensão do sistema., NSUnderlyingError=0x7f9700d0a4c0 {Error Domain=kextcache Code=5 "(null)"}}. Link to comment Share on other sites More sharing options...
Micky1979 Posted June 14, 2016 Share Posted June 14, 2016 Not sure but the error is about kextcache command line, also the array contains arguments for it Edit Try to rename "/Volumes/MacOS 10.12" to something else with no empty spaces (/Volumes/Sierra ?) 1 Link to comment Share on other sites More sharing options...
MattsCreative Posted June 14, 2016 Share Posted June 14, 2016 http://imgur.com/Gpqqg76thanks for the help Not sure but the error is about kextcache command line, also the array contains arguments for it Omg got to bed now you need sleep 1 Link to comment Share on other sites More sharing options...
Micky1979 Posted June 14, 2016 Share Posted June 14, 2016 it is dawn here Link to comment Share on other sites More sharing options...
RehabMan Posted June 14, 2016 Share Posted June 14, 2016 im still getting early reboot. so i cant say for sure. gonna report soon. thanks. Do you need KernelPm=true? Maybe KernelPm needs changes? Check the binary to see if the pattern Clover is searching for is still there. It is early going here... we should not be surprised if Clover patching needs revisions. 2 Link to comment Share on other sites More sharing options...
mendietinha Posted June 14, 2016 Share Posted June 14, 2016 Do you need KernelPm=true? Maybe KernelPm needs changes? Check the binary to see if the pattern Clover is searching for is still there. It is early going here... we should not be surprised if Clover patching needs revisions. i have haswell lappy and the kernelPM is true on clover. maybe thats the case. sorry, dont know what to look for. Link to comment Share on other sites More sharing options...
Sherlocks Posted June 14, 2016 Share Posted June 14, 2016 i have haswell lappy and the kernelPM is true on clover. maybe thats the case. sorry, dont know what to look for. me too, i checked KernelPM. Link to comment Share on other sites More sharing options...
mendietinha Posted June 14, 2016 Share Posted June 14, 2016 me too, i checked KernelPM. you could boot a haswell lappy? maybe we really need a new kernelPM patch. Link to comment Share on other sites More sharing options...
RehabMan Posted June 14, 2016 Share Posted June 14, 2016 i have haswell lappy and the kernelPM is true on clover. maybe thats the case. sorry, dont know what to look for. In kernel_patcher.c in Clover you find: (https://sourceforge.net/p/cloverefiboot/code/HEAD/tree/rEFIt_UEFI/Platform/kernel_patcher.c) //rehabman: for 10.10 (data portion) else if (0x00000002000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data1) found and patched\n"); } else if (0x0000004C000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data2) found and patched\n"); } else if (0x00000190000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data3) found and patched\n"); return TRUE; } // rehabman: change for 10.11.1 beta 15B38b else if (0x00001390000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.11.1(beta 15B38b)(data3) found and patched\n"); return TRUE; } So for current version (10.11.1+), we are looking for these three patterns (in order): 0x00000002000000E2ULL 0x0000004C000000E2ULL 0x00001390000000E2ULL Those are Intel order, so byte reversed: e2 00 00 00 02 00 00 00 e2 00 00 00 4c 00 00 00 e2 00 00 00 39 01 00 00 So check the kernel binary to see if those three patterns still exist... Note that this is a table, so it is also possible there are new entries... But chances are those new entries would apply only to newer CPUs than your Haswell CPUs. 1 Link to comment Share on other sites More sharing options...
Sherlocks Posted June 14, 2016 Share Posted June 14, 2016 you could boot a haswell lappy? maybe we really need a new kernelPM patch. Sandy laptop dont have early reboot. But skylake have early reboot. As result, we need to new KernelPM patch. 나의 LG-F410S 의 Tapatalk에서 보냄 Who try? Use an USB stick because for this test I've only replaced El Capitan pattern, don't cry after! CLOVERX64.efi.zip corestorage? Whats on "diskutil list"? Injection is not work. I use usb install like el capitan. 나의 LG-F410S 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
mendietinha Posted June 14, 2016 Share Posted June 14, 2016 In kernel_patcher.c in Clover you find: (https://sourceforge.net/p/cloverefiboot/code/HEAD/tree/rEFIt_UEFI/Platform/kernel_patcher.c) //rehabman: for 10.10 (data portion) else if (0x00000002000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data1) found and patched\n"); } else if (0x0000004C000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data2) found and patched\n"); } else if (0x00000190000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data3) found and patched\n"); return TRUE; } // rehabman: change for 10.11.1 beta 15B38b else if (0x00001390000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.11.1(beta 15B38b)(data3) found and patched\n"); return TRUE; } So for current version (10.11.1+), we are looking for these three patterns (in order): 0x00000002000000E2ULL 0x0000004C000000E2ULL 0x00001390000000E2ULL Those are Intel order, so byte reversed: e2 00 00 00 02 00 00 00 e2 00 00 00 4c 00 00 00 e2 00 00 00 39 01 00 00 So check the kernel binary to see if those three patterns still exist... Note that this is a table, so it is also possible there are new entries... But chances are those new entries would apply only to newer CPUs than your Haswell CPUs. i could only find the second one: e2 00 00 00 4c 00 00 00 Link to comment Share on other sites More sharing options...
Sherlocks Posted June 14, 2016 Share Posted June 14, 2016 In kernel_patcher.c in Clover you find: (https://sourceforge.net/p/cloverefiboot/code/HEAD/tree/rEFIt_UEFI/Platform/kernel_patcher.c) //rehabman: for 10.10 (data portion) else if (0x00000002000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data1) found and patched\n"); } else if (0x0000004C000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data2) found and patched\n"); } else if (0x00000190000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data3) found and patched\n"); return TRUE; } // rehabman: change for 10.11.1 beta 15B38b else if (0x00001390000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.11.1(beta 15B38b)(data3) found and patched\n"); return TRUE; } So for current version (10.11.1+), we are looking for these three patterns (in order): 0x00000002000000E2ULL 0x0000004C000000E2ULL 0x00001390000000E2ULL Those are Intel order, so byte reversed: e2 00 00 00 02 00 00 00 e2 00 00 00 4c 00 00 00 e2 00 00 00 39 01 00 00 So check the kernel binary to see if those three patterns still exist... Note that this is a table, so it is also possible there are new entries... But chances are those new entries would apply only to newer CPUs than your Haswell CPUs. there is only byte 0x0000004C000000E2ULL 1 Link to comment Share on other sites More sharing options...
Micky1979 Posted June 14, 2016 Share Posted June 14, 2016 if can help, this is the uncompressed Sierra's prelinkedkernel decomp.zip 1 Link to comment Share on other sites More sharing options...
Sherlocks Posted June 14, 2016 Share Posted June 14, 2016 if can help, this is the uncompressed Sierra's prelinkedkernel i think we need to add this code //rehabman: for 10.10 (data portion) else if (0x00000002000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data1) found and patched\n"); } else if (0x0000004C000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data2) found and patched\n"); } else if (0x00000190000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.10(data3) found and patched\n"); return TRUE; } // rehabman: change for 10.11.1 beta 15B38b else if (0x00001390000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.11.1(beta 15B38b)(data3) found and patched\n"); return TRUE; } // sherlocks: change for 10.12 DP1 else if (0x00003390000000E2ULL == (*((UINT64 *)Ptr))) { (*((UINT64 *)Ptr)) = 0x0000000000000000ULL; DBG("Kernel power management patch 10.12 DP1 found and patched\n"); return TRUE; } Link to comment Share on other sites More sharing options...
RehabMan Posted June 14, 2016 Share Posted June 14, 2016 i think we need to add this code No. You're looking for: E2 00 00 00 90 33 00 00 Byte reversed, it is: 0x00003390000000E2ULL not 0x00033900000000E2ULL 1 Link to comment Share on other sites More sharing options...
mhaeuser Posted June 14, 2016 Share Posted June 14, 2016 Did you get kext injection to work? Would be surprised if they didnt remove the current way kernel-wise. Link to comment Share on other sites More sharing options...
Micky1979 Posted June 14, 2016 Share Posted June 14, 2016 is not working yet Link to comment Share on other sites More sharing options...
mendietinha Posted June 14, 2016 Share Posted June 14, 2016 give me 2 minutes try (on a USB pen drive for safety) new kernel pm and kext injection? i think kernelpm is wrong according to rehab. Link to comment Share on other sites More sharing options...
Recommended Posts