Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30,171 posts in this topic

Recommended Posts

Simonej
Simonej
Posted
Posted

Don't worry Slice, take your time :)
anyone knows what are the states (x12, x37, x39 only?) of MacPro6,1 original?

Slice, I'm reading that 1620v2 of MacPro works in turbo state x39 only single core, but I can't see x39, only x38 with ssdtPRGen and max x37 (4 core active always?) with Clover.

Pike, with ssdtPRGen i need to change APFL generated (from Zero to 0x04 i think). I'm not expert with power management but with your script my system works almost always at x37.

 

Super Respect for your awesome work! Thanks!!!

  • Like 1
Link to comment
Share on other sites
mac09hack
mac09hack
Posted
Posted

I have tried to get Clover to consistently work as my boot loader of choice. I recently loaded MacOS X 10.6 onto a USB formatted as GUID and loaded Clover into the EFI partition. I managed to load the OS but upon loading that disk iClover was loaded onto, the disk will not boot up 10.6.

 

ON the USB and the Disk/EFI I have run these Terminal commands:

 

(1)sudo fdisk440 -f boot0ss -u -y /dev/rdisk1

 

(2)dd if=/dev/rdisk1s1 count=1 bs=512 of=origbs

 

(3)cp boot1f32alt newbs

 

(4)dd if=origbs of=newbs skip=3 seek=3 bs=1 count=87 conv=notrunc

 

(5)dd if=newbs of=/dev/rdisk1s1 count=1 bs=512

 

(6)cp BOOT /Volumes/Kingston/

 

(7)cp -r EFI /Volumes/Kingston/

 

Now, I see no reason to do steps 6 and 7 because I first loaded the boot loader files onto the USB and the Disk/EFI (the Clover Bootloader installs the 4 directories and the boot file)

 

Can anyone tell me what I am missing to get the Disk to load from the contents of the /EFI partition?

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Hi fellas,

Despite i inject a SMC version via FakeSMC (AXIPAAAC), Clover overrides it with is own ; is there a flag i can use in the config.plist ?

 

Many thanks.

If you tell about version 3.3 then:

- HWInfo.kext uses value from Clover to override default value from FakeSMC.info.plist. The priority needed to make dynamic changes for these key depending on Clover settings on the fly;

- if you want a priority of FakeSMC.info.plist then you can erase HWInfo.kext. Be happy!

 

If you use kozlek's version then I don't know his rules.

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

@Simonej

I made a revision 2678 that should work for your chipset. Test please.

Set c-states as follow

	<key>ACPI</key>
	<dict>
		<key>SSDT</key>
		<dict>
			<key>Generate</key>
			<dict>
				<key>CStates</key>
				<true/>
				<key>PStates</key>
				<true/>
			</dict>
			<key>EnableC7</key>
			<true/>
			<key>EnableC6</key>
			<true/>
			<key>EnableC4</key>
			<false/>
			<key>EnableC2</key>
			<false/>

@magnifico

As far as I remember you have the same chipset. Are you able to test c-state PM in your case?

 

CLOVERX64.efi-2678.zip

Link to comment
Share on other sites
magnifico
magnifico
Posted
Posted

@magnifico

As far as I remember you have the same chipset. Are you able to test c-state PM in your case?

 

 

No, I sold the motherboard with the x79 chipset,sorry .

 

Ps: but him for me a need Patched AppleIntelCPUPowerManagement for ivy bridge ?

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Thank you Slice, problem is not solved;

-I have same error "ACPI_SMC_PlatformPlugin::registerLPCDriver - WARNING - LPC device initialization failed: C-state power management not initialized"

-No states other 12-37.

 

-My Config was http://pastebin.com/HZZPbfYZ now is http://pastebin.com/49HrYrpd

I want to see your generated SSDTs and boot.log

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

-Log http://www64.zippyshare.com/v/73718371/file.html

-SSDT http://www52.zippyshare.com/v/28896861/file.html

 

Edit: In my Boot log I read AMD Radeon R9 but I don't have R9, I have Radeon 7950.

It is the same just rebranded. 

7950 == R9 280. 

I decided to keep new name for a future.

 

About state generation I found a mistake. Test new revision, please.

CLOVERX64.efi-2678a.zip

Link to comment
Share on other sites
Simonej
Simonej
Posted
Posted

 Same error "ACPI_SMC_PlatformPlugin::registerLPCDriver - WARNING - LPC device initialization failed: C-state power, maybe It's problem of my motherboard AsRock X79 Professional?

 

Boot.log= http://pastebin.com/fbbgxh4m

I tried to search, from what I understand 1620v2 works only with single core at x39, from what I see on my system also remains at x37 in single core.

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

 Same error "ACPI_SMC_PlatformPlugin::registerLPCDriver - WARNING - LPC device initialization failed: C-state power, maybe It's problem of my motherboard AsRock X79 Professional?

 

Boot.log= http://pastebin.com/fbbgxh4m

 

I tried to search, from what I understand 1620v2 works only with single core at x39, from what I see on my system also remains at x37 in single core.

At this moment this is my mistake but I still not see why. There are no significant messages in boot.log to understand.

I will think more. If you can then you may insert additional DBG into findCPU procedure.

Link to comment
Share on other sites
Kikill3r
Kikill3r
Posted
Posted

Hello community,

I finally managed to install Clover without those nasty boot0 and boot1 errors. But when I now boot my computer, after the POST there is just that blinking "_" for 4-5 seconds. Then a "7" appears on the screen for 3 seconds. After that, the computer just restarts. I searched for a solution for hours but didn't find anything. Please help me!

System specs:

Fujitsu T8100

Core 2 Duo T8100

GMA 965 graphics chipset (X3100 core) which is not supported of course, so I work with VESA 3.0 Graphics

1024x768 internal display

btw I am using Niresh's mavericks

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Hello community,

I finally managed to install Clover without those nasty boot0 and boot1 errors. But when I now boot my computer, after the POST there is just that blinking "_" for 4-5 seconds. Then a "7" appears on the screen for 3 seconds. After that, the computer just restarts. I searched for a solution for hours but didn't find anything. Please help me!

System specs:

Fujitsu T8100

Core 2 Duo T8100

GMA 965 graphics chipset (X3100 core) which is not supported of course, so I work with VESA 3.0 Graphics

1024x768 internal display

btw I am using Niresh's mavericks

I have very similar computer. See my signature #2.

X3100 is supported very good but up to 10.7.5. I think you have to stay at this version.

About Clover. You seems to choose Boot BiosBlockIO that may not work on notebooks.

Choose ordinary boot Sata-64

Link to comment
Share on other sites
Simonej
Simonej
Posted
Posted

Tested but same error, I think the problem is dependent by states generation, if I use SSDT i haven't this problem. Don't worry too much Slice, but I noticed a small performance improvement in single and multiple core! and Clover is working in single core x37 instead of x39

Link to comment
Share on other sites
xpamamadeus
xpamamadeus
Posted
Posted

No, I installed in normal Sata-64.

 

After reinstall, now it says b1t:init6 and reboots. It's just throwing random errors onto my head.

I have same behavior on lenovo 3000 n100.

I try one of first version of clover and have same problem.

Clover canot be used on this machine...

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Tested but same error, I think the problem is dependent by states generation, if I use SSDT i haven't this problem. Don't worry too much Slice, but I noticed a small performance improvement in single and multiple core! and Clover is working in single core x37 instead of x39

Corrected in rev.2681.

Make full DarwinDump with it.

  • Like 1
Link to comment
Share on other sites
Kikill3r
Kikill3r
Posted
Posted

I have same behavior on lenovo 3000 n100.

I try one of first version of clover and have same problem.

Clover canot be used on this machine...

So i can forget Clover? That would be a shame...

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

I have same behavior on lenovo 3000 n100.

I try one of first version of clover and have same problem.

Clover canot be used on this machine...

On what machine?

Screen Shot 2014-05-28 at 0.35.51.png

Link to comment
Share on other sites
tluck
tluck
Posted
Posted

@xpamamadeaus

 

fwiw, i am using clover to boot a Lenovo T60.  it has C2D T5600. this is a very similar model/spec to the 3000, I believe.  Note: i run lion 10.7.4 as that is the highest level because of the 32-bit ATI X1300 gfx driver. but works works for snow leopard 10.6.8 too.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...