naiclub Posted August 16 Share Posted August 16 1 hour ago, Alpha22 said: @naiclub post your config.plist deleting the serials from the smbios 19 minutes ago, Alpha22 said: @naiclub replace config.plist, restart Reset NVRAM use f11 config.plist.zip 6.37 kB · 3 downloads Still can't use it. It doesn't display. 15 minutes ago, Max.1974 said: @naiclub try using Hackintool to convert Decimal 3841 to Hex F01 and insert in Clover CPU Type menu (im using Clover Configurator) Reveal hidden contents Reveal hidden contents Hi @Slice thx i will try with this fix! Reveal hidden contents I'll give it a try. 12 minutes ago, deeveedee said: As has been discussed before, revpatch=auto (which includes revpatch=cpuname) is part of the solution. Read this and this. Thank you. 4 minutes ago, Max.1974 said: Hi @deeveedee I hope you are well. When I use Clover, and disable the e-cores of my i9-13900k processor in the Bios, it recognizes it without the need for any boot-arg. When I try to use it in Clover and enter the parameters as in the screenshots above, it only works if I boot it once, with Opencore, in this case with e-cores activated, that is, the efficiency cores. I don't mind much, but if we can learn. With Opencore, I enter all the parameters you mentioned (because you only use them in Opecore, right?) and it recognizes it. Interestingly, if I boot with Opencore, it registers in Nvram and even if I return with Clover, what was injected remains in Nvram, until we do a ResetNvram the name remains. But because some people have problems with this, we ask if there is a solution. For my part, just boot with Opencore and keep the e-cores treds activated in Bios. Hugs! Thank you. 1 Link to comment Share on other sites More sharing options...
Alpha22 Posted August 16 Share Posted August 16 35 minutes ago, naiclub said: 1 hour ago, Alpha22 said: @naiclub replace config.plist, restart Reset NVRAM use f11 config.plist.zip 6.37 kB · 3 downloads Still can't use it. It doesn't display. please explain 1 Link to comment Share on other sites More sharing options...
Alpha22 Posted August 16 Share Posted August 16 for me Clover Boot - Arguments - revpatch=sbvmm revpatch=diskread revpatch=cpuname revcpu=1 CPU - Type 0x0F01 2 Link to comment Share on other sites More sharing options...
naiclub Posted August 16 Share Posted August 16 2 minutes ago, Alpha22 said: please explain Now it shows the value as we set. I did the same as Mr. Maldon, but there is another question. is number of CPU units which is E-CORE doesn't show like OC and cinebenchR23 the score dropped a little. Spoiler Link to comment Share on other sites More sharing options...
Alpha22 Posted August 16 Share Posted August 16 (edited) 6 minutes ago, naiclub said: Now it shows the value as we set. I did the same as Mr. Maldon, but there is another question. is number of CPU units which is E-CORE doesn't show like OC and cinebenchR23 the score dropped a little. Hide contents try iMacPro1.1 Bios settings default Edited August 16 by Alpha22 1 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted August 16 Share Posted August 16 (edited) 33 minutes ago, Alpha22 said: for me Clover Boot - Arguments - revpatch=sbvmm revpatch=diskread revpatch=cpuname revcpu=1 CPU - Type 0x0F01 Thanks a lot @Alpha22 and @MaLd0n that works to me now with one more 0 (0x0F01) and not only 0xF01!! Thanks!!! Thanks for App @MaLd0n ProcessorInfo Spoiler Spoiler Spoiler Spoiler Edited August 16 by Max.1974 3 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 16 Share Posted August 16 Add revcpu=1 revcpuname=Intel®Core™Processor revpatch=cpuname,sbvmm,diskread,pci with good plist editor, I'm using PlistEdit Pro. About these boot arguments HERE. Add 0x0601 for 1, 2, 4, or 6 Core or 0x0F01 for 8 Core+. Instructions from ACDT. 4 1 Link to comment Share on other sites More sharing options...
naiclub Posted August 16 Share Posted August 16 23 minutes ago, Alpha22 said: try iMacPro1.1 Bios settings default iMacPro1,1 No, there are only 6 P-cores, no 8 E-cores. As for the BIOS, I didn't touch it at all. The default settings. 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 16 Share Posted August 16 30 minutes ago, naiclub said: I did the same as Mr. Maldon, but there is another question. is number of CPU units which is E-CORE doesn't show like OC and cinebenchR23 the score dropped a little. Reveal hidden contents With MacPro7,1 need CpuFriend 4 Link to comment Share on other sites More sharing options...
naiclub Posted August 16 Share Posted August 16 (edited) 34 minutes ago, MaLd0n said: With MacPro7,1 need CpuFriend It doesn't work. Look in kext. It's in the picture. Spoiler Edited August 16 by naiclub Link to comment Share on other sites More sharing options...
deeveedee Posted August 16 Share Posted August 16 @MaLd0n You have the patience of a saint with the teaching style of a seasoned professor. I have a lot to learn. 4 Link to comment Share on other sites More sharing options...
Max.1974 Posted August 16 Share Posted August 16 (edited) 17 minutes ago, deeveedee said: @MaLd0n You have the patience of a saint with the teaching style of a seasoned professor. I have a lot to learn. He save many people !! Edited August 16 by Max.1974 4 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 16 Share Posted August 16 25 minutes ago, deeveedee said: @MaLd0n You have the patience of a saint with the teaching style of a seasoned professor. I have a lot to learn. Me? I'm just a long time curious person. 5 1 Link to comment Share on other sites More sharing options...
deeveedee Posted August 16 Share Posted August 16 25 minutes ago, MaLd0n said: Me? I'm just a long time curious person. ... and a master of emoticons. 2 Link to comment Share on other sites More sharing options...
Max.1974 Posted August 16 Share Posted August 16 1 hour ago, naiclub said: It doesn't work. Look in kext. It's in the picture. Reveal hidden contents Are you try compiled first ? Need specific instructions https://github.com/corpnewt/CPUFriendFriend Spoiler 1 Link to comment Share on other sites More sharing options...
naiclub Posted August 17 Share Posted August 17 4 hours ago, Max.1974 said: Are you try compiled first ? Need specific instructions https://github.com/corpnewt/CPUFriendFriend Reveal hidden contents Thank you. I would like to open all CPU cores. I wonder if CPUFriend will do that or not. And I wonder why OC can open all CPU cores by forcing revcpu=1, but with Clover it doesn't respond like that. 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted August 17 Share Posted August 17 (edited) 25 minutes ago, naiclub said: Obrigado(a). Eu gostaria de abrir todos os núcleos da CPU. Gostaria de saber se o CPUFriend fará isso ou não. E eu me pergunto por que o OC pode abrir todos os núcleos da CPU forçando o revcpu=1, mas com o Clover ele não responde assim. Hello, I'm not the one who has the best knowledge about this, but Clover does open, just use the correct plugins in your EFI, which are on github. https://github.com/CloverHackyColor/FakeSMC3_with_plugins?tab=readme-ov-file#fakesmc3-with-plugins Spoiler After using HWMonitor you will see that all cpu cores are working. See mine. There is a fight between VirtualSMC and FakeSMC, but this kext is more important to be used in Clover than VirtualSMC, which is made for Opencore. As you can see from the name of the processor, the issue of cores is purely cosmetic, because what matters is the proper functioning of each manager, and Clover was designed to run many important processes better, with FakeSMC. I wouldn't trade using Clover today for anything. Well that's it, you need to make your choice, either use Opencore or Clover, as the benefits of each can only be seen with daily use. After gaining another feature without Opencore, with the native name of the CPU, with the help of both, as Opencore is part of Clover, I won't use OC anytime soon, but I always prefer to hope that both prosper in their projects. After all, we only lose if we both distance ourselves. Make your choice, study, and a good Hack for you. 🍀 Edited August 17 by Max.1974 2 Link to comment Share on other sites More sharing options...
naiclub Posted August 17 Share Posted August 17 3 hours ago, Max.1974 said: Hello, I'm not the one who has the best knowledge about this, but Clover does open, just use the correct plugins in your EFI, which are on github. https://github.com/CloverHackyColor/FakeSMC3_with_plugins?tab=readme-ov-file#fakesmc3-with-plugins Hide contents After using HWMonitor you will see that all cpu cores are working. See mine. There is a fight between VirtualSMC and FakeSMC, but this kext is more important to be used in Clover than VirtualSMC, which is made for Opencore. As you can see from the name of the processor, the issue of cores is purely cosmetic, because what matters is the proper functioning of each manager, and Clover was designed to run many important processes better, with FakeSMC. I wouldn't trade using Clover today for anything. Well that's it, you need to make your choice, either use Opencore or Clover, as the benefits of each can only be seen with daily use. After gaining another feature without Opencore, with the native name of the CPU, with the help of both, as Opencore is part of Clover, I won't use OC anytime soon, but I always prefer to hope that both prosper in their projects. After all, we only lose if we both distance ourselves. Make your choice, study, and a good Hack for you. 🍀 Thank you. You are a master. You can give me good knowledge. You can always point me in the right direction. I will try it again. P.S. In OC, I use the same plugin as you. It was provided by Master Maldol. 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted August 17 Share Posted August 17 10 hours ago, naiclub said: Thank you. You are a master. You can give me good knowledge. You can always point me in the right direction. I will try it again. P.S. In OC, I use the same plugin as you. It was provided by Master Maldol. Thanks my friend, im just noob with some feel hours studying about Hackintosh !! 😆 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted September 6 Share Posted September 6 (edited) New commit from Clover, this time I can compile with Xcode 16 and instructions for Sequoia Thanks a lot to all team and @chris1111 @Slice Spoiler I set this commands after intall Xcode 16 beta 6, and Command Line Tools for Xcode beta 6 (CLT) and before run compiler: https://developer.apple.com/download/all/ A. Enabling Developer settings to Xcode Beta See if you have Developer folder: Run in Terminal: xcode-select --print-path You should see in terminal this: /Applications/Xcode-beta.app/Contents/Developer If not, run this command: sudo mkdir -p /Library/Developer/CommandLineTools After this folder was created, run this commands: sudo xcode-select -s /Applications/Xcode-beta.app sudo xcode-select -s /Applications/Xcode-beta.app/Contents/Developer (edited) Attention: this command is crucial, its necessary to run compilers: sudo xcode-select --switch /Library/Developer/CommandLineTools/ Install brew toolchain tools: B. Install Home Brew /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)" C. And this tools too, after install Home Brew, run in Terminal: brew tap messense/macos-cross-toolchains brew install x86_64-unknown-linux-gnu Try run your compiler of Clover C. Run this steps by steps (just if you run compiler in Sequoia) 1. Download Clover cd ~ mkdir src cd src git clone --recurse-submodule https://github.com/CloverHackyColor/CloverBootloader.git cd CloverBootloader 2. Download and install Python 3.12.5 or last version 3.12.6 https://www.python.org/downloads/ 3. Set a link for python cd /Library/Frameworks/Python.framework/Versions/3.12/bin/ sudo ln -s python3.12 python cd - 4. Install tools pip3 install setuptools 5. Base tools build make -C BaseTools 6. Run build command ./buildme 7. Choose Option "2) build all (Default Toolchain)" or try Option 1) build Clover If you get some errors try again after compiler stop You can try this 2 commands too: sudo touch /Library/Developer/CommandLineTools/.beta Then sudo xcode-select --switch /Library/Developer/CommandLineTools/ And run again step 6 ./buildme Good Lucky 🍀 Edited September 8 by Max.1974 6 3 Link to comment Share on other sites More sharing options...
naiclub Posted September 6 Share Posted September 6 5 hours ago, Max.1974 said: New commit from Clover, this time I can compile with Xcode 16 and instructions for Sequoia Thanks a lot to all team and @chris1111 @Slice Reveal hidden contents Im set this commands after intall Xcode 16 beta, CLT and before run compiler: Enable Developer settings to Xcode Beta sudo xcode-select -s /Applications/Xcode-beta.app sudo xcode-select -s /Applications/Xcode-beta.app/Contents/Developer sudo xcode-select --switch /Library/Developer/CommandLineTools/ sudo mkdir -p /Library/Developer/CommandLineTools Install Home Brew and this too: brew tap messense/macos-cross-toolchains brew install x86_64-unknown-linux-gnu Run this steps by steps (just for Sequoia) 1. Download Clover cd ~ mkdir src cd src git clone --recurse-submodule https://github.com/CloverHackyColor/CloverBootloader.git cd CloverBootloader 2. Download and install Python 3.12.5 3. Set a link for python cd /Library/Frameworks/Python.framework/Versions/3.12/bin/ sudo ln -s python3.12 python cd - 4. Install tools pip3 install setuptools 5. Base tools build make -C BaseTools 6. Run build command ./buildme 7. Choose Option "2) build all (Default Toolchain)" Good Lucky 🍀 Hello my dear friend, I don't use Mac OS very often. It's only once in a while. To be honest, I'm not very good at using it regularly. I don't know if I'll use it for fun. 1 Link to comment Share on other sites More sharing options...
Max.1974 Posted September 6 Share Posted September 6 Hi @naiclub my friend! I have passion to use macOs and my tools and programs that I need to my job wrks fine, but today Linux is superior of Hackintosh or macOs. And we just using for fun too! 3 Link to comment Share on other sites More sharing options...
Max.1974 Posted September 6 Share Posted September 6 My Lenovo response the same way Spoiler 1 Link to comment Share on other sites More sharing options...
LockDown Posted September 6 Share Posted September 6 5160? 1 Link to comment Share on other sites More sharing options...
Slice Posted September 6 Share Posted September 6 16 minutes ago, LockDown said: 5160? Tag is created but the last sources was not committed. Wait please. See issue #708 4 1 Link to comment Share on other sites More sharing options...
Recommended Posts