arsradu Posted June 24, 2017 Share Posted June 24, 2017 @arsradu Check this : http://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/?p=2447943 Thank you! By the way, the newer versions of Clover Configurator also support selecting the drive from the list. Unfortunately, if the volume is encrypted, I wish you good luck finding out which one's your drive, unless you know the UUID. Still, an improvement nonetheless. Sadly, Custom Entries worked only for HFS+ volumes. I didn't have any success getting it to display anything else than "Boot FileVault Preebooter from Preboot on Preboot" on APFS. Link to comment Share on other sites More sharing options...
apianti Posted June 24, 2017 Share Posted June 24, 2017 Yep it switches by recovery-boot-mode variable on Mac What? That variable either forces recovery mode on startup or protects recovery mode with icloud pin lock. The chooser actually removes the encrypted volume and bless on the recovery is changed when filevault is activated. So you are seeing the recovery entry... Thank you! By the way, the newer versions of Clover Configurator also support selecting the drive from the list. Unfortunately, if the volume is encrypted, I wish you good luck finding out which one's your drive, unless you know the UUID. Still, an improvement nonetheless. Sadly, Custom Entries worked only for HFS+ volumes. I didn't have any success getting it to display anything else than "Boot FileVault Preebooter from Preboot on Preboot" on APFS. I'm not sure what clover configurator is doing, someone should fix that. And no, custom entries work for any volume that is readable (because of driver). VFAT, HFS+, NTFS, EXT#, APFS, etc. You probably did not create custom entries that accurately select what you want. Also don't forget that encrypted volumes are actually started from the recovery, so you need your custom entry to use the recovery, not the encrypted volume. Link to comment Share on other sites More sharing options...
arsradu Posted June 24, 2017 Share Posted June 24, 2017 For as far as I can tell, both the APFS encrypted volume (Prebooter as it shows in Clover GUI) and the Recovery are using the same UUID. So, it doesn't matter to which one of them you're pointing the custom entries. It should work. Still...it works only for the HFS volumes. Not so much for APFS. What you're saying makes perfect sense. However, my experience shows something different. Also, if it were an issue with Clover Configurator, shouldn't it be for all volumes? Link to comment Share on other sites More sharing options...
apianti Posted June 24, 2017 Share Posted June 24, 2017 Well the one recovery is for the SierraSSD volume, and another for HiSierraHDD, the one you want is the recovery for whatever you installed in the APFS container, High Sierra? I don't think that they have the same UUIDs, it's probably a bug in configurator. What is the output of these commands diskutil info disk0s3 diskutil info disk0s4 diskutil info disk3s2 diskutil info disk3s3 EDIT: Actually forgot for the APFS you will want the preboot not recovery. Link to comment Share on other sites More sharing options...
arsradu Posted June 24, 2017 Share Posted June 24, 2017 Well the one recovery is for the SierraSSD volume, and another for HiSierraHDD, the one you want is the recovery for whatever you installed in the APFS container, High Sierra? I don't think that they have the same UUIDs, it's probably a bug in configurator. What is the output of these commands diskutil info disk0s3 diskutil info disk0s4 diskutil info disk3s2 diskutil info disk3s3 EDIT: Actually forgot for the APFS you will want the preboot not recovery. disk0s3 output 192-168-0-103:~ jimmy$ diskutil info disk0s3 Device Identifier: disk0s3 Device Node: /dev/disk0s3 Whole: No Part of Whole: disk0 Volume Name: Recovery HD Mounted: No Partition Type: Apple_Boot File System Personality: Journaled HFS+ Type (Bundle): hfs Name (User Visible): Mac OS Extended (Journaled) Journal: Unknown (not mounted) Owners: Disabled OS Can Be Installed: No Media Type: Generic Protocol: SATA SMART Status: Verified Volume UUID: F632AB60-1DEE-337B-929D-882F16FBAEC0 Disk / Partition UUID: 6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4 Disk Size: 650.0 MB (650002432 Bytes) (exactly 1269536 512-Byte-Units) Device Block Size: 512 Bytes Volume Total Space: 0 B (0 Bytes) (exactly 0 512-Byte-Units) Volume Available Space: 0 B (0 Bytes) (exactly 0 512-Byte-Units) Read-Only Media: No Read-Only Volume: Not applicable (not mounted) Device Location: Internal Removable Media: Fixed Solid State: Yes disk0s4 output 192-168-0-103:~ jimmy$ diskutil info disk0s4 Device Identifier: disk0s4 Device Node: /dev/disk0s4 Whole: No Part of Whole: disk0 Volume Name: Not applicable (no file system) Mounted: Not applicable (no file system) File System: None Partition Type: Apple_APFS OS Can Be Installed: No Media Type: Generic Protocol: SATA SMART Status: Verified Disk / Partition UUID: DCD35DBA-904C-4F0A-801D-1037CADFD0CB Disk Size: 123.4 GB (123439407104 Bytes) (exactly 241092592 512-Byte-Units) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: Not applicable (no file system) Device Location: Internal Removable Media: Fixed Solid State: Yes disk3s2 output 192-168-0-103:~ jimmy$ diskutil info disk3s2 Device Identifier: disk3s2 Device Node: /dev/disk3s2 Whole: No Part of Whole: disk3 Volume Name: Preboot Mounted: No Partition Type: 41504653-0000-11AA-AA11-00306543ECAC File System Personality: APFS Type (Bundle): apfs Name (User Visible): APFS OS Can Be Installed: No Media Type: Generic Protocol: SATA SMART Status: Not Supported Volume UUID: 3FD03752-1484-44BB-A298-DD20545A42DB Disk / Partition UUID: 3FD03752-1484-44BB-A298-DD20545A42DB Disk Size: 123.4 GB (123439407104 Bytes) (exactly 241092592 512-Byte-Units) Device Block Size: 4096 Bytes Volume Total Space: 0 B (0 Bytes) (exactly 0 512-Byte-Units) Volume Available Space: 0 B (0 Bytes) (exactly 0 512-Byte-Units) Read-Only Media: No Read-Only Volume: Not applicable (not mounted) Device Location: Internal Removable Media: Fixed Solid State: Yes disk3s3 output 192-168-0-103:~ jimmy$ diskutil info disk3s3 Device Identifier: disk3s3 Device Node: /dev/disk3s3 Whole: No Part of Whole: disk3 Volume Name: Recovery Mounted: No Partition Type: 41504653-0000-11AA-AA11-00306543ECAC File System Personality: APFS Type (Bundle): apfs Name (User Visible): APFS OS Can Be Installed: No Media Type: Generic Protocol: SATA SMART Status: Not Supported Volume UUID: D9E47E9F-586E-4981-A4F0-95855B0B59DF Disk / Partition UUID: D9E47E9F-586E-4981-A4F0-95855B0B59DF Disk Size: 123.4 GB (123439407104 Bytes) (exactly 241092592 512-Byte-Units) Device Block Size: 4096 Bytes Volume Total Space: 0 B (0 Bytes) (exactly 0 512-Byte-Units) Volume Available Space: 0 B (0 Bytes) (exactly 0 512-Byte-Units) Read-Only Media: No Read-Only Volume: Not applicable (not mounted) Device Location: Internal Removable Media: Fixed Solid State: Yes Link to comment Share on other sites More sharing options...
apianti Posted June 24, 2017 Share Posted June 24, 2017 Yeah there's a problem with configurator, probably because of APFS or something. But here are the UUIDs: Recovery HD: disk0s3 6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4 APFS Preboot: disk3s2 3FD03752-1484-44BB-A298-DD20545A42DB APFS Recovery: disk3s3 D9E47E9F-586E-4981-A4F0-95855B0B59DF Use that method to get the proper UUIDs until configurator retrieves them correctly. Link to comment Share on other sites More sharing options...
fusion71au Posted June 25, 2017 Share Posted June 25, 2017 @arsradu, Your Clover Main Menu and output from “diskutil list”, correctly shows 3 Recovery Partitions (note the 3 Red Cross icons ) - disk0s3 (for SierraSSD), disk1s3 (for HiSierraHDD) and disk3s3 (for HiSierraSSD). However a standard Recovery Partition should only have 1 boot.efi located in com.apple.recovery.boot … I suspect the recovery partition for your HiSierraHDD probably has an additional boot.efi file in another folder, related to your encrypted initial High Sierra DP1 install. In terminal, mount disk1s3, then open the volume in Finder to see its contents: diskutil mount disk1s3 If necessary, show any hidden folders/files with the attached “ShowAllFiles.app”. You can delete or rename any "extra" boot.efi to something else eg "boot.efi_disabled" and hopefully this will remove the extra entry on your next reboot . Hiding Recovery Entries On my system, I have 2 Recovery Partitions (disk0s6 for Sierra and disk1s3 for High Sierra) hidden by a single custom entry: <key>GUI</key> <dict> <key>Custom</key> <dict> <key>Entries</key> <array> <dict> <key>Hidden</key> <true/> <key>Title</key> <string>Recovery HD</string> <key>Type</key> <string>OSXRecovery</string> </dict> </array> </dict> </dict> This is my Clover Main Menu... Pressing F3 at the main menu unhides the previously hidden Recovery Partitions... Note - I hide the Preboot partition using its UUID: Looking at my bdmesg/boot log in the first screenshot, the UUID is C28D6D496175AC4AA0B90D6F52620073 (will be different on your system)... so in config.plist/GUI, I also have <key>Hide</key> <array> <string>C28D6D496175AC4AA0B90D6F52620073</string> </array> Entries in this section remain hidden, even after pressing F3 at the Clover Boot Main Menu. ShowAllFiles.app.zip 2 Link to comment Share on other sites More sharing options...
mnfesq Posted June 25, 2017 Share Posted June 25, 2017 What does this mean? It started happening with version 4097. I tried earlier versions and same problem. I reformatted my EFI partition and same problem. Nothing I can think of will stop this. Clover gets to the Clover menu but once I select a partition to boot, any partition, nothing happens and then I get this. I can still boot from a USB flash drive I have or I wouldn't be posting this. Any help would be greatly appreciated. 1 Link to comment Share on other sites More sharing options...
fusion71au Posted June 25, 2017 Share Posted June 25, 2017 @mnfesq, Maybe the same problem I had with official Clover Builds >r4060 compiled with Xcode flag -fno-common see post #2228. Try swapping your CLOVERX64.efi/BOOTX64.efi with the attached ones compiled without -fno-common. Edit: Legacy or UEFI boot? What about swapping the CLOVERX64.efi/BOOTX64.efi (or entire EFI folder) & "boot" file from your working USB flash drive to the EFI system partition on your hard drive? r4097.zip Link to comment Share on other sites More sharing options...
mnfesq Posted June 25, 2017 Share Posted June 25, 2017 @mnfesq, Maybe the same problem I had with official Clover Builds >r4060 compiled with Xcode flag -fno-common see post #2228. Try swapping your CloverX64.efi/BOOTX64.efi with the attached ones compiled without -fno-common. Thanks but unfortunately, there was no change. Still getting the same screen instead of the white apple. Link to comment Share on other sites More sharing options...
arsradu Posted June 25, 2017 Share Posted June 25, 2017 Yeah there's a problem with configurator, probably because of APFS or something. But here are the UUIDs: Recovery HD: disk0s3 6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4 APFS Preboot: disk3s2 3FD03752-1484-44BB-A298-DD20545A42DB APFS Recovery: disk3s3 D9E47E9F-586E-4981-A4F0-95855B0B59DF Use that method to get the proper UUIDs until configurator retrieves them correctly. Which one should I use? The Preboot one? None of the UUIDs above is the one displayed when pressing spacebar on Clover GUI for the APFS volume. This is what I have in Clover GUI. I used the same method (UUID from spacebar) for all OSes. Renamed 2 of them with no issues. Why is it Clover Configurator's fault that the same exact syntax doesn't work for APFS FV2 drive? ) It's the same syntax for all of them. Only the UUID and the FullTitle are different. And the UUID for the APFS volume was not taken with CC in any way. So, I don't see how that could be a detection problem on CC's side. It's not even loaded when Clover starts. This is what I use for the regular FV2 HFS+ drive. And it works. Just took the UUID from CLOVER GUI, added it into the config, and there you go. Everything ok. SierraSSD is a HFS+ drive with FileVault. And now it's displayed as SierraSSD in Clover GUI. <key>Custom</key> <dict> <key>Entries</key> <array> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>SierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4</string> <key>VolumeType</key> <string>Internal</string> </dict> Please, let me know if this is the correct syntax. Now, the same exact syntax, only different UUID is used for the APFS FV encrypted partition. The one displayed as "Boot FileVault Preeboter from Preboot". So, since it's from Preboot, I suppose I need the Preboot UUID, right? So, neither the UUID displayed on spacebar or the one from diskutil info are working. So, assuming the information displayed in Clover GUI is not correct (though the same method worked for the other two volumes), I thought I would need to add the UUID of the Preboot volume, right? Which, apparently is not the one displayed in Clover GUI (on spacebar). So, like this: <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>HiSierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>3FD03752-1484-44BB-A298-DD20545A42DB</string> <key>VolumeType</key> <string>Internal</string> </dict> So, the only things that changed (and this has been edited on the config directly, no CC involved) is the UUID and the FullTitle, right? The only issue is that it doesn't work. The drive's name (the one I use to boot into HiSierraSSD), is still "Boot FileVault Preeboter from Preboot". What am I missing here...? ) Also, big thank you for your feedback and your help, so far. @fusion71au Thank you. In the meantime, I wiped the entire HDD and reinstalled High Sierra. The volume is still HiSierraHDD for this case. But I'll keep in mind your advice for the next time. Also, I'll try to hide those Recovery drives too, right after I finish with the renaming of the APFS FV encrypted volume... Which doesn't seem to work, for some weird reason. Is your APFS High Sierra volume also FV encrypted? Link to comment Share on other sites More sharing options...
SavageAUS Posted June 25, 2017 Share Posted June 25, 2017 Which one should I use? The Preboot one? None of the UUIDs above is the one displayed when pressing spacebar on Clover GUI for the APFS volume. This is what I have in Clover GUI. screenshot1.png I used the same method (UUID from spacebar) for all OSes. Renamed 2 of them with no issues. Why is it Clover Configurator's fault that the same exact syntax doesn't work for APFS FV2 drive? ) It's the same syntax for all of them. Only the UUID and the FullTitle are different. And the UUID for the APFS volume was not taken with CC in any way. So, I don't see how that could be a detection problem on CC's side. It's not even loaded when Clover starts. This is what I use for the regular FV2 HFS+ drive. And it works. Just took the UUID from CLOVER GUI, added it into the config, and there you go. Everything ok. SierraSSD is a HFS+ drive with FileVault. And now it's displayed as SierraSSD in Clover GUI. <key>Custom</key> <dict> <key>Entries</key> <array> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>SierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4</string> <key>VolumeType</key> <string>Internal</string> </dict> Please, let me know if this is the correct syntax. Now, the same exact syntax, only different UUID is used for the APFS FV encrypted partition. The one displayed as "Boot FileVault Preeboter from Preboot". So, since it's from Preboot, I suppose I need the Preboot UUID, right? So, neither the UUID displayed on spacebar or the one from diskutil info are working. So, assuming the information displayed in Clover GUI is not correct (though the same method worked for the other two volumes), I thought I would need to add the UUID of the Preboot volume, right? Which, apparently is not the one displayed in Clover GUI (on spacebar). So, like this: <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>HiSierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>3FD03752-1484-44BB-A298-DD20545A42DB</string> <key>VolumeType</key> <string>Internal</string> </dict> So, the only things that changed (and this has been edited on the config directly, no CC involved) is the UUID and the FullTitle, right? The only issue is that it doesn't work. The drive's name (the one I use to boot into HiSierraSSD), is still "Boot FileVault Preeboter from Preboot". What am I missing here...? ) Also, big thank you for your feedback and your help, so far. @fusion71au Thank you. In the meantime, I wiped the entire HDD and reinstalled High Sierra. The volume is still HiSierraHDD for this case. But I'll keep in mind your advice for the next time. Also, I'll try to hide those Recovery drives too, right after I finish with the renaming of the APFS FV encrypted volume... Which doesn't seem to work, for some weird reason. Is your APFS High Sierra volume also FV encrypted? http://www.insanelymac.com/forum/index.php?/topic/324194-[pre-release]-macOS-High-Sierra#entry2448555 Post #981 if link fails in pre release macOS High Sierra. Hope it helps. Sent from my SM-G930F using Tapatalk Link to comment Share on other sites More sharing options...
arsradu Posted June 25, 2017 Share Posted June 25, 2017 http://www.insanelymac.com/forum/index.php?/topic/324194-[pre-release]-macOS-High-Sierra#entry2448555 Post #981 if link fails in pre release macOS High Sierra. Hope it helps. Sent from my SM-G930F using Tapatalk I understand I need to use the last part... In my case 5237D03F8414BB44A298DD20545A42DB. Ok. But still, right now I'm not trying to hide the volume. I'm trying to rename it. And using the string above as OSX Custom Entry, replacing the one in my previous post (this 3FD03752-1484-44BB-A298-DD20545A42DB with this 5237D03F8414BB44A298DD20545A42DB), does nothing. Link to comment Share on other sites More sharing options...
fusion71au Posted June 25, 2017 Share Posted June 25, 2017 @fusion71au Thank you. In the meantime, I wiped the entire HDD and reinstalled High Sierra. The volume is still HiSierraHDD for this case. But I'll keep in mind your advice for the next time. Also, I'll try to hide those Recovery drives too, right after I finish with the renaming of the APFS FV encrypted volume... Which doesn't seem to work, for some weird reason. Is your APFS High Sierra volume also FV encrypted? @arsradu, Can you show your Clover boot log ie what is the output of running the bdmesg command in terminal? Also can you show the GUI section of your config.plist? Eg for my system Vol 14=Preboot Vol 15=macOS_HS Vol 16=Recovery Vol 17=VM Notice the UUID I get from the Clover Menu for all 4 APFS volumes is the same: BA8FD576-FEF9-4BD2-95D0-EA399260C1D1 The unique UUID for Vol 14=Preboot on my system is the last one in the VenMedia section ie C28D6D496175AC4AA0B90D6F52620073. My High Sierra Volume is not encrypted so boot.efi is located on the actual volume (/System/Library/CoreServices/boot.efi in macOS_HS). For FileVault encrypted installs, I'm assuming this boot.efi is located in the Preboot volume instead. Link to comment Share on other sites More sharing options...
arsradu Posted June 25, 2017 Share Posted June 25, 2017 @arsradu, Can you show your Clover boot log ie what is the output of running the dmesg command in terminal? Also can you show the GUI section of your config.plist? Eg for my system Bootlog from dmesg.png Vol 14=Preboot Vol 15=macOS_HS Vol 16=Recovery Vol 17=VM Notice the UUID I get from the Clover Menu for all 4 APFS volumes is the same: BA8FD576-FEF9-4BD2-95D0-EA399260C1D1 The unique UUID for Vol 14=Preboot on my system is the last one in the VenMedia section ie C28D6D496175AC4AA0B90D6F52620073. My High Sierra Volume is not encrypted so boot.efi is located on the actual volume (/System/Library/CoreServices/boot.efi in macOS_HS[/size]). For FileVault encrypted installs, I'm assuming this boot.efi is located in the Preboot volume instead. Sure, here's my bdmesg. Last login: Sun Jun 25 15:17:33 on ttys000 192-168-0-103:~ jimmy$ bdmesg 0:100 0:100 MemLog inited, TSC freq: 3199991749 0:100 0:000 0:100 0:000 Now is 25.6.2017, 12:15:4 (GMT) 0:100 0:000 Starting Clover revision: 4097 on American Megatrends EFI 0:100 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.5 | XCODE: 8.3.3] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F5EE06E3-E943-412D-AC4B-44158E2A3195,0x28,0x64000) @DBF5E898 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 === [ Get Smbios ] ======================================== 0:100 0:000 Type 16 Index = 0 0:100 0:000 Total Memory Slots Count = 4 0:100 0:000 Type 17 Index = 0 0:100 0:000 Ignoring insane frequency value 65535MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = <null string> 0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string> 0:100 0:000 SmbiosTable.Type17->PartNumber = <null string> 0:100 0:000 Type 17 Index = 1 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = 0215 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMX8GX3M2A1600C11 0:100 0:000 Type 17 Index = 2 0:100 0:000 Ignoring insane frequency value 65535MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = <null string> 0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string> 0:100 0:000 SmbiosTable.Type17->PartNumber = <null string> 0:100 0:000 Type 17 Index = 3 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = 0215 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMX8GX3M2A1600C11 0:100 0:000 Boot status=0 0:100 0:000 Running on: 'MS-7922' with board ' Z97S SLI Krait Edition (MS-7922)' 0:100 0:000 === [ GetCPUProperties ] ================================== 0:100 0:000 CPU Vendor = 756E6547 Model=306C3 0:100 0:000 The CPU supported SSE4.1 0:100 0:000 The CPU supported turbo 0:100 0:000 BrandString = Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz 0:100 0:000 MSR 0xE2 before patch 1E008400 0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on 0:100 0:000 MSR 0xCE 00080838_F3012000 0:100 0:000 MSR 0x1A0 00850089 0:100 0:000 corrected FLEX_RATIO = 0 0:100 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 0:100 0:000 MaxDiv/MinDiv: 32.0/8 0:100 0:000 Turbo: 36/36/36/36 0:100 0:000 Features: 0xBFEBFBFF 0:100 0:000 Threads: 4 0:100 0:000 Cores: 4 0:100 0:000 FSB: 25 MHz 0:100 0:000 CPU: 3200 MHz 0:100 0:000 TSC: 3200 MHz 0:100 0:000 PIS: 100 MHz 0:100 0:000 === [ GetDevices ] ======================================== 0:100 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000 0:100 0:000 PCI (00|00:01.00) : 8086 0C01 class=060400 0:100 0:000 PCI (00|01:00.00) : 10DE 0FC6 class=030000 0:100 0:000 - GFX: Model=MSI GeForce GTX 650 family E7 (Nvidia) 0:100 0:000 PCI (00|01:00.01) : 10DE 0E1B class=040300 0:100 0:000 - HDMI Audio: 0:100 0:000 PCI (00|00:14.00) : 8086 8CB1 class=0C0330 0:100 0:000 PCI (00|00:16.00) : 8086 8CBA class=078000 0:100 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF 0:100 0:000 PCI (00|00:1A.00) : 8086 8CAD class=0C0320 0:100 0:000 PCI (00|00:1B.00) : 8086 8CA0 class=040300 0:100 0:000 PCI (00|00:1C.00) : 8086 8C90 class=060400 0:100 0:000 PCI (00|00:1C.02) : 8086 244E class=060401 0:100 0:000 PCI (00|03:00.00) : 1B21 1080 class=060400 0:100 0:000 PCI (00|00:1C.03) : 8086 8C96 class=060400 0:100 0:000 PCI (00|05:00.00) : 10EC 8168 class=020000 0:100 0:000 - LAN: 0 Vendor=Realtek 0:100 0:000 PCI (00|00:1D.00) : 8086 8CA6 class=0C0320 0:100 0:000 PCI (00|00:1F.00) : 8086 8CC4 class=060100 0:100 0:000 PCI (00|00:1F.02) : 8086 8C82 class=010601 0:100 0:000 PCI (00|00:1F.03) : 8086 8CA2 class=0C0500 0:100 0:000 === [ GetDefaultSettings ] ================================ 0:100 0:000 Clover load options size = 4 bytes 0:106 0:006 EFI\CLOVER\config.plist loaded: Success 0:106 0:000 === [ GetListOfThemes ] =================================== 0:116 0:010 - [00]: mimi black 0:124 0:007 - [01]: LIGHTUP 0:137 0:012 - [02]: RANDOM 0:138 0:001 - [02]: EMBEDDED 0:140 0:001 === [ Found config plists ] =============================== 0:140 0:000 - config-backup.plist 0:140 0:000 - config.plist 0:140 0:000 === [ GetEarlyUserSettings ] ============================== 0:140 0:000 timeout set to 5 0:140 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:140 0:000 Default theme: lightup 0:140 0:000 === [ LoadDrivers ] ======================================= 0:148 0:007 Loading AptioInputFixB2.efi status=Success 0:155 0:007 Loading OsxFatBinaryDrv-64.efi status=Success 0:155 0:000 Loading HFSPlus.efi status=Success 0:156 0:000 - driver needs connecting 0:156 0:000 Loading PartitionDxe-64.efi status=Success 0:156 0:000 - driver needs connecting 0:156 0:000 Loading AppleImageCodec-64.efi status=Success 0:157 0:000 Loading AppleUITheme-64.efi status=Success 0:158 0:000 Loading DataHubDxe-64.efi status=Success 0:162 0:004 Loading AppleKeyAggregator-64.efi status=Success 0:170 0:007 Loading APFS.EFI status=Success 0:180 0:010 - driver needs connecting 0:180 0:000 Loading OsxAptioFix2Drv-64.efi status=Success 0:180 0:000 Loading FSInject-64.efi status=Success 0:181 0:000 Loading FirmwareVolume-64.efi status=Success 0:182 0:000 Loading SMCHelper-64.efi status=Success 0:182 0:000 Loading NTFS.EFI status=Success 0:185 0:002 - driver needs connecting 0:185 0:000 4 drivers needs connecting ... 0:185 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:185 0:000 Partition driver loaded: CD disconnect Success 0:185 0:000 HFS+ driver loaded 0:185 0:000 APFS driver loaded 0:185 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:721 0:536 === [ InitScreen ] ======================================== 0:721 0:000 SetScreenResolution: 2560x1440 - already set 0:721 0:000 Console modes reported: 4, available modes: 0:721 0:000 - [01]: 80x25 0:721 0:000 - [02]: 80x50 0:721 0:000 - [03]: 100x31 0:721 0:000 - [04]: 128x40 (current mode) 0:721 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F5EE06E3-E943-412D-AC4B-44158E2A3195,0x28,0x64000) 0:721 0:000 === [ GetMacAddress ] ===================================== 0:721 0:000 MAC address of LAN #0= D8:CB:8A:C0:69:24: 0:721 0:000 === [ ScanSPD ] =========================================== 0:722 0:000 SMBus device : 8086 8CA2 class=0C0500 status=Success 0:722 0:000 SMBus CmdReg: 0x3 0:722 0:000 Scanning SMBus [8086:8CA2], mmio: 0xF7214004, ioport: 0xF000, hostc: 0x11 0:722 0:000 Slots to scan [8]... 0:722 0:000 SPD[1]: Type 11 @0x51 0:741 0:018 XMP Profile1: 10*1/8ns 0:741 0:000 Found module with XMP version 1.3 0:741 0:000 Using XMP Profile1 instead of standard frequency 1333MHz 0:741 0:000 DDR speed 1600MHz 0:741 0:000 Slot: 1 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMX8GX3M2A1600C11 SerialNo=0000000000000000 0:741 0:000 SPD[3]: Type 11 @0x53 0:760 0:018 XMP Profile1: 10*1/8ns 0:760 0:000 Found module with XMP version 1.3 0:760 0:000 Using XMP Profile1 instead of standard frequency 1333MHz 0:760 0:000 DDR speed 1600MHz 0:760 0:000 Slot: 3 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMX8GX3M2A1600C11 SerialNo=0000000000000000 0:760 0:000 === [ GetAcpiTablesList ] ================================= 0:761 0:000 Get Acpi Tables List from RSDT: 0:761 0:000 - [00]: FACP A M I len=132 0:761 0:000 - [01]: APIC A M I len=114 0:761 0:000 - [02]: FPDT A M I len=68 0:761 0:000 - [03]: FIDT A M I len=156 0:761 0:000 - [04]: ASF! HCG len=165 0:761 0:000 - [05]: SSDT Ther_Rvp len=3197 0:761 0:000 - [06]: SSDT Cpu0Ist len=1337 0:761 0:000 - [07]: SSDT CpuSsdt len=2932 0:761 0:000 - [08]: MCFG A M I len=60 0:761 0:000 - [09]: HPET A M I len=56 0:761 0:000 - [10]: SSDT SataTabl len=877 0:761 0:000 - [11]: SSDT SaSsdt len=22581 0:761 0:000 - [12]: UEFI A M I len=66 0:761 0:000 - [13]: DMAR BDW len=128 0:761 0:000 - [14]: BGRT A M I len=56 0:761 0:000 Calibrated TSC frequency =3199991749 =3199MHz 0:761 0:000 === [ GetUserSettings ] =================================== 0:761 0:000 USB FixOwnership: yes 0:761 0:000 Dropping 3 tables: 0:761 0:000 - [00]: Drop table signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043) 0:761 0:000 - set table: 54445353, 6D50757043 to drop: no 0:761 0:000 - [01]: Drop table signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043) 0:761 0:000 - set table: 54445353, 74734930757043 to drop: yes 0:761 0:000 - [02]: Drop table signature="DMAR" (52414D44) 0:761 0:000 - set table: 52414D44, 0 to drop: yes 0:761 0:000 - final DSDT Fix mask=1FE60000 0:761 0:000 ChassisType: 0xD 0:762 0:001 === [ ScanVolumes ] ======================================= 0:762 0:000 Found 20 volumes with blockIO 0:762 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 0:784 0:022 - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 0:784 0:000 Found optical drive 0:784 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 0:785 0:001 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 0:786 0:000 Result of bootcode detection: bootable unknown (legacy) 0:786 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F5EE06E3-E943-412D-AC4B-44158E2A3195,0x28,0x64000) 0:786 0:000 Result of bootcode detection: bootable unknown (legacy) 0:807 0:020 This is SelfVolume !! 0:807 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,38C6C1AE-2E2C-4FF8-8D72-9AC89395A11A,0x64028,0x4A6BE340) 0:807 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,D81935A0-CEC7-4AB4-834F-8572B93C1D72,0x4A722368,0x135F20) 0:837 0:030 - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,CFF624F8-C0C3-4448-A8A4-62A66193376C,0x28,0x64000) 0:838 0:000 Result of bootcode detection: bootable unknown (legacy) 0:843 0:004 - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0F773801-80BD-45F5-8F2F-C45790E3B5FB,0x64028,0xE906A10) 0:843 0:000 Result of bootcode detection: bootable unknown (legacy) 0:843 0:000 - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4,0xE96AA38,0x135F20) 0:844 0:000 - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0) 0:844 0:000 Result of bootcode detection: bootable unknown (legacy) 0:844 0:000 - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(5,GPT,DB0968EA-61E0-45D8-ADE3-FFE6F8ABE9EA,0x1D08D148,0x138800) 0:845 0:000 - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,4B8588D0-6E43-4B29-A475-0B1254F46C4A,0x28,0x64000) 0:846 0:000 Result of bootcode detection: bootable unknown (legacy) 0:872 0:026 - [13]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,1A2217AC-33B4-42D0-8D17-920E9FA99621,0x6C800,0x4BFD8A58) 0:873 0:000 - [14]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(3,GPT,0100BFD5-1EBF-4711-B9B2-33F00C91280D,0x4C085258,0x18EDDA8) 0:873 0:000 - [15]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(4,GPT,6E01D029-3175-43E1-9390-8D208CDAA12D,0x4D9B3000,0x26D53800) 0:874 0:000 - [16]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,5237D03F8414BB44A298DD20545A42DB) 0:874 0:000 - [17]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D88DC35029E2E930A5B91EF623E60C8A) 0:874 0:000 - [18]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,9F7EE4D96E588149A4F095855B0B59DF) 0:874 0:000 - [19]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,FBBB5C655D03A5408555A20AA841031B) 0:874 0:000 === [ InitTheme ] ========================================= 0:875 0:001 Using theme 'lightup' (EFI\CLOVER\themes\lightup) 0:875 0:000 OS main and drive as badge 0:879 0:003 Loading font from ThemeDir: Success 0:880 0:000 Choosing theme lightup 0:880 0:000 after NVRAM boot-args=-alcbeta -lilubeta 0:880 0:000 === [ Dump SMC keys from NVRAM ] ========================== 0:880 0:000 found AppleSMC protocol 0:899 0:019 === [ ScanLoader ] ======================================== 0:899 0:000 - [04]: 'EFI' 0:899 0:000 - [05]: 'HiSierraHDD' 0:952 0:053 AddLoaderEntry for Volume Name=HiSierraHDD 0:978 0:025 Check if volume Is Hibernated: 0:978 0:000 Check sleep image 'by signature': 1:032 0:053 read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success 1:032 0:000 using default sleep image name = \private\var\vm\sleepimage 1:052 0:019 no valid sleep image offset was found 1:052 0:000 sleepimage offset could not be acquired 1:052 0:000 hibernated: no - sign 1:072 0:020 not png, try icns 1:073 0:000 not png, try icns 1:073 0:000 - [06]: 'Recovery HD' 1:110 0:036 AddLoaderEntry for Volume Name=Recovery HD 1:152 0:042 not png, try icns 1:152 0:000 not png, try icns 1:153 0:000 - [07]: 'EFI' 1:153 0:000 - [09]: 'Recovery HD' 1:155 0:002 AddLoaderEntry for Volume Name=Recovery HD 1:156 0:000 Check if volume Is Hibernated: 1:156 0:000 Check sleep image 'by signature': 1:156 0:000 using default sleep image name = \private\var\vm\sleepimage 1:156 0:000 sleepimage not found -> Not Found 1:156 0:000 hibernated: no - sign 1:157 0:000 not png, try icns 1:157 0:000 AddLoaderEntry for Volume Name=Recovery HD 1:158 0:001 not png, try icns 1:159 0:000 - [12]: 'EFI' 1:159 0:000 - [13]: 'Storage' 1:159 0:000 - [14]: 'Stuff' 1:159 0:000 - [15]: 'Tools' 1:159 0:000 - [16]: 'Preboot' 1:161 0:002 AddLoaderEntry for Volume Name=Preboot 1:164 0:002 Check if volume Is Hibernated: 1:164 0:000 Check sleep image 'by signature': 1:164 0:000 using default sleep image name = \private\var\vm\sleepimage 1:164 0:000 sleepimage not found -> Not Found 1:164 0:000 hibernated: no - sign 1:164 0:000 not png, try icns 1:166 0:001 - [17]: 'HiSerraSSD' 1:166 0:000 - [18]: 'Recovery' 1:167 0:001 AddLoaderEntry for Volume Name=Recovery 1:169 0:001 not png, try icns 1:170 0:001 - [19]: 'VM' 1:170 0:000 === [ AddCustomTool ] ===================================== 1:178 0:007 found tool \EFI\CLOVER\tools\Shell64U.efi 1:178 0:000 Checking EFI partition Volume 4 for Clover 1:178 0:000 Found Clover 1:182 0:003 === [ GetEfiBootDeviceFromNvram ] ========================= 1:182 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,5237D03F8414BB44A298DD20545A42DB) 1:182 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,5237D03F8414BB44A298DD20545A42DB)' 1:182 0:000 - LoaderPath: '<null string>' 1:182 0:000 - Guid = DCD35DBA-904C-4F0A-801D-1037CADFD0CB 1:182 0:000 === [ FindStartupDiskVolume ] ============================= 1:182 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,5237D03F8414BB44A298DD20545A42DB) 1:182 0:000 - searching for that partition 1:182 0:000 - found entry 4. 'Boot FileVault Prebooter from Preboot', Volume 'Preboot' 1:182 0:000 Boot redirected to Entry 4. 'Boot FileVault Prebooter from Preboot' 1:182 0:000 DefaultIndex=4 and MainMenu.EntryCount=12 1:244 0:062 GUI ready 7:257 6:012 === [ StartLoader ] ======================================= 7:257 0:000 Finally: Bus=99999kHz CPU=3200MHz 7:257 0:000 Loading boot.efi status=Success 7:268 0:010 GetOSVersion: 10.13 (17A291j) 7:268 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM 7:268 0:000 === [ PatchSmbios ] ======================================= 7:268 0:000 insert table 9 for dev 0:0 7:268 0:000 insert table 9 for dev 0:1 7:268 0:000 insert table 9 for dev 0:0 7:269 0:000 Channels: 2 7:269 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 7:269 0:000 SMBIOS Type 17 Index = 0 => 0 0: 7:269 0:000 BANK 0 DIMM0 EMPTY 7:269 0:000 SMBIOS Type 17 Index = 1 => 2 2: 7:269 0:000 BANK 1 DIMM0 EMPTY 7:269 0:000 SMBIOS Type 17 Index = 2 => 1 1: 7:269 0:000 BANK 0 DIMM1 1600MHz 4096MB 7:269 0:000 SMBIOS Type 17 Index = 3 => 3 3: 7:269 0:000 BANK 1 DIMM1 1600MHz 4096MB 7:269 0:000 mTotalSystemMemory = 8192 7:269 0:000 NumberOfMemoryDevices = 4 7:269 0:000 Type20[0]->End = 0x3FFFFF, Type17[2] = 0x1000 7:269 0:000 Type20[1]->End = 0x7FFFFF, Type17[3] = 0x3000 7:269 0:000 Table 131 is present, CPUType=35 7:269 0:000 Change to: 605 7:269 0:000 === [ PatchACPI ] ========================================= 7:269 0:000 RSDT 0xDE7C2028 7:269 0:000 FADT from RSDT: 0xDE7C2138 7:269 0:000 XSDT 0xDE7C2090 7:269 0:000 FADT from XSDT: 0xDE7D4D58 7:269 0:000 Xsdt reallocation done 7:269 0:000 old FADT length=10C 7:269 0:000 Found OperationRegion(GNVS, SystemMemory, DE7F5C18, ...) 7:269 0:000 Found OperationRegion(PNVA, SystemMemory, DE7F6D98, ...) 7:269 0:000 Found OperationRegion(CPSB, SystemMemory, DE2B0E98, ...) 7:269 0:000 Found OperationRegion(TMMB, SystemMemory, FED40000, ...) 7:269 0:000 Found OperationRegion(ABNV, SystemMemory, DE7F0000, ...) 7:269 0:000 Found OperationRegion(GCAD, SystemMemory, DE7DF018, ...) 7:269 0:000 Found OperationRegion(PRFA, SystemMemory, DE7DD018, ...) 7:269 0:000 Apply DsdtFixMask=0x1FE60000 7:269 0:000 drop _DSM mask=0x0000 7:269 0:000 === [ FixBiosDsdt ] ======================================= 7:269 0:000 VideoCard devID=0xFC610DE 7:269 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 7:269 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE 7:269 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE 7:493 0:224 Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1) 7:493 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE 7:493 0:000 first CPU found at 87C4 offset 87C7 7:493 0:000 score candidate at 87C0 7:493 0:000 score inserted in acpi_cpu_score _PR_ 7:493 0:000 Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_ 7:494 0:000 Found PCIROOTUID = 0 7:494 0:000 Start RTC Fix 7:494 0:000 found RTC Length not match, Maybe will case CMOS reset will patch it. 7:494 0:000 found RTC had IRQNoFlag will move -3 bytes 7:494 0:000 ...len=12B8F 7:494 0:000 new size written to 2251 shift=0 len=12B8F 7:494 0:000 len after correct outers 12B8F 7:494 0:000 Start TMR Fix 7:494 0:000 Start HDMI5 Fix 7:494 0:000 have no HDMI device while HDMIADR2=1 7:494 0:000 HDMIADR1=10000 HDMIADR2=1 7:494 0:000 with default properties 7:494 0:000 Start _WAK Return Fix 7:494 0:000 _WAK Method find return data, don't need to patch. 7:494 0:000 return len=12C08 7:494 0:000 deleting device CRT_ 7:494 0:000 deleting device DVI_ 7:494 0:000 deleting device SPKR 7:495 0:000 deleting device ECP_ 7:495 0:000 deleting device LPT_ 7:495 0:000 deleting device FDC0 7:495 0:000 deleting device ECP1 7:495 0:000 deleting device LPT1 7:496 0:000 Start PNLF Fix 7:496 0:000 found PWRB at 51ED 7:496 0:000 Start _S3D Fix 7:496 0:000 indirect name=PNVB 7:496 0:000 Start ADP1 fix 7:496 0:000 no device(AC) exists 7:497 0:000 === [ ACPIDropTables ] ==================================== 7:497 0:000 Drop tables from Xsdt, SIGN=DMAR TableID=BDW Length=128 7:497 0:000 Xsdt has tables count=15 7:497 0:000 Table: DMAR BDW 128 dropped 7:497 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=1337 7:497 0:000 Xsdt has tables count=14 7:497 0:000 Table: SSDT Cpu0Ist 1337 dropped 7:497 0:000 === [ PatchAllSSDT ] ====================================== 7:497 0:000 Patch table: SSDT Ther_Rvp len=0xC7D 7:497 0:000 Patch table: SSDT CpuSsdt len=0xB74 7:497 0:000 Patch table: SSDT SataTabl len=0x36D 7:497 0:000 Patch table: SSDT SaSsdt len=0x5835 7:497 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0 7:497 0:000 Xsdt has tables count=13 7:497 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4 7:497 0:000 Maximum control=0x20 7:497 0:000 Turbo control=0x24 7:497 0:000 P-States: min 0x8, max 0x24 7:497 0:000 SSDT with CPU P-States generated successfully 7:497 0:000 SSDT with CPU C-States generated successfully 7:497 0:000 === [ RestSetup macOS ] =================================== 7:497 0:000 EdidDiscovered size=128 7:497 0:000 ------- EDID Table 7:497 0:000 000 | 00 FF FF FF FF FF FF 00 41 0C 7:497 0:000 010 | E9 08 62 12 00 00 24 19 01 03 7:497 0:000 020 | 80 37 1F 78 2A A3 75 B0 4C 38 7:497 0:000 030 | B5 26 0C 50 54 BD 4B 00 D1 C0 7:497 0:000 040 | 81 80 81 40 95 0F 95 00 B3 00 7:497 0:000 050 | 81 C0 01 01 56 5E 00 A0 A0 A0 7:497 0:000 060 | 29 50 30 20 35 00 29 37 21 00 7:497 0:000 070 | 00 1E 00 00 00 FF 00 55 48 42 7:497 0:000 080 | 31 35 33 36 30 30 34 37 30 36 7:497 0:000 090 | 00 00 00 FC 00 50 48 4C 20 32 7:497 0:000 100 | 35 38 42 36 51 4A 45 42 00 00 7:497 0:000 110 | 00 FD 00 32 4C 1E 63 21 00 0A 7:497 0:000 120 | 20 20 20 20 20 20 00 0B 7:497 0:000 NVidia GFX injection not set 7:497 0:000 setting specified layout-id=1 (0x1) 7:497 0:000 stringlength = 2270 7:497 0:000 CurrentMode: Width=2560 Height=1440 7:497 0:000 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D9A72C18 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D9A72C18 7:515 0:017 Use origin smbios table type 1 guid. 7:521 0:006 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 7:537 0:015 Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext 7:543 0:005 Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext 7:565 0:022 Extra PlugIn kext: EFI\CLOVER\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext 7:627 0:061 Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext 7:638 0:011 Extra kext: EFI\CLOVER\kexts\Other\FakePCIID_XHCIMux.kext 7:646 0:007 Extra kext: EFI\CLOVER\kexts\Other\FakePCIID.kext 7:650 0:004 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext 7:661 0:011 SetStartupDiskVolume: 7:661 0:000 * Volume: 'Preboot' 7:661 0:000 * LoaderPath: '<null string>' 7:661 0:000 * DevPath: Preboot 7:661 0:000 * GUID = DCD35DBA-904C-4F0A-801D-1037CADFD0CB 7:662 0:000 * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>DCD35DBA-904C-4F0A-801D-1037CADFD0CB</string></dict></dict></dict></array> 7:662 0:000 Custom boot is disabled and the GUI section from config: <key>GUI</key> <dict> <key>Custom</key> <dict> <key>Entries</key> <array> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>HiSierraHDD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>38C6C1AE-2E2C-4FF8-8D72-9AC89395A11A</string> <key>VolumeType</key> <string>Internal</string> </dict> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>SierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4</string> <key>VolumeType</key> <string>Internal</string> </dict> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>HiSierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>5237D03F8414BB44A298DD20545A42DB</string> <key>VolumeType</key> <string>Internal</string> </dict> </array> </dict> Link to comment Share on other sites More sharing options...
fusion71au Posted June 25, 2017 Share Posted June 25, 2017 @arsradu,Can you also show the GUI section from your config.plist? Maybe try removing the "scan" section and only relying on custom entries?Your boot log confirms the unique UUID for the Preboot Volume is 5237D03F8414BB44A298DD20545A42DB but doesn't look like your custom entries are working (only autoscan by Clover)?PS: I recommend you edit your config.plist with a plist editor like Xcode to avoid syntax errors.... Edit - look at @apianti's answer in post#13535 to correctly configure the custom entry with CC. Use diskutil list to list your disks and partitions Use "diskutil mount diskxsy" to mount the Preboot Volume (x=disk number of APFS synthesized disk, y=Preboot partition number) Use the "Go" menu in Finder to navigate to /Volumes and determine the unique folder name in the Preboot Volume Use CC to modify the Custom Entry to point to boot.efi (in my case, \E3C94042-178D-3F27-8414-5A3D0FB21445\System\Library\CoreServices\boot.efi, will be different for you) 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted June 25, 2017 Share Posted June 25, 2017 I understand I need to use the last part... In my case 5237D03F8414BB44A298DD20545A42DB. Ok. But still, right now I'm not trying to hide the volume. I'm trying to rename it. And using the string above as OSX Custom Entry, replacing the one in my previous post (this 3FD03752-1484-44BB-A298-DD20545A42DB with this 5237D03F8414BB44A298DD20545A42DB), does nothing. I understand your trying to rename, using the method above I was able to hide my preboot volume so instead of hide you just rename. Was only posting as reference to hopefully help. Sent from my SM-G930F using Tapatalk 1 Link to comment Share on other sites More sharing options...
arsradu Posted June 25, 2017 Share Posted June 25, 2017 @arsradu, Can you also show the GUI section from your config.plist? Maybe try removing the "scan" section and only relying on custom entries? Should now be included. I edited my post earlier. I understand your trying to rename, using the method above I was able to hide my preboot volume so instead of hide you just rename. Was only posting as reference to hopefully help. Sent from my SM-G930F using Tapatalk Yep, that was very useful information. Thank you! However, I think that the fact that my APFS drive is also encrypted with FileVault...makes all the difference. And now I'm trying to decrypt it to see if it works, and the Turn Off FileVault is greyed out... And yes, even after unlocking that section. Anyway, that's another topic. Thank you very much for your feedback! Link to comment Share on other sites More sharing options...
mnfesq Posted June 25, 2017 Share Posted June 25, 2017 is the Apple folder and its contents that are located in the EFI partition critical for booting? When I reformatted my EFI partition in an effort to fix the problems referenced here http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=2450961, I lost the Apple folder. Might that explain why I cannot boot from my system drive's EFI partition? Link to comment Share on other sites More sharing options...
chris1111 Posted June 25, 2017 Share Posted June 25, 2017 is the Apple folder and its contents that are located in the EFI partition critical for booting? When I reformatted my EFI partition in an effort to fix the problems referenced here http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=2450961, I lost the Apple folder. Might that explain why I cannot boot from my system drive's EFI partition? What is your Xcode version and EDK2 for compile ? Link to comment Share on other sites More sharing options...
Badruzeus Posted June 25, 2017 Share Posted June 25, 2017 Hi guys, A few questions from my side. I'm trying to debug a certain issue I've got with one of the Recovery disks, after reinstalling High Sierra from it... I think it might have created an extra Recovery partition or something. ... I actually, have similar question as @Arsadu. Fyi I'm using Single GPT Disk (SATA), on my case: ~ I've installed 10.13 Beta 1 using Core.pkg on HFS+ Partition w/o including "macOSUpd10.13.RecoveryHDUpdate.pkg" ~ I then converted it to APFS using DiskUtility.app within macOS USB Installer ~ First reboot with APFS took long time entering Desktop for unknown reason, but I figured out there was a new @615MB Partition named "Recovery" (w/o ~HD) under macOS 10.13. Second reboot, It appeared on Clover boot screen, but I couldn't boot into it. ~ I updated to 10.13 Beta 2 with including "macOSUpd10.13.RecoveryHDUpdate.pkg" (finally failed though) and then I get another new partition named "RecoveryHD". ~ So now, I have 2 Recovery Partitions and both are bootable 10.13 volumes. I think need to hide one of them within Clover's GUI. Clover Movies Theme credit: @Chris1111 1 Link to comment Share on other sites More sharing options...
mnfesq Posted June 25, 2017 Share Posted June 25, 2017 What is your Xcode version and EDK2 for compile ? I didn't compile my own version of Clover. I got it from Sourceforge. However, I did fix it, sort of, by copying the working EFI partition on my USB drive to the EFI partition on my system drive. Now it boots but when I try to run the Clover installer, it tells me that the version of Clover I am trying to install (4097) is incompatible with the version of macOS that I have on my system and the install fails. At least my panic has subsided and I can deal with this more slowly and methodically. BTW, all of this started because I couldn't get my install of High Sierra to sleep so I decided to delete the partition and restart from scratch. Perhaps things will work better once I have High Sierra running again. Link to comment Share on other sites More sharing options...
arsradu Posted June 25, 2017 Share Posted June 25, 2017 @arsradu, doesn't look like your custom entries are working (only autoscan by Clover)? PS: I recommend you edit your config.plist with a plist editor like Xcode to avoid syntax errors.... Well, they are working for the other volumes I edited.... It's just this one that doesn't seem to work. I edited with Xcode, but if the rest of the Clover GUI config is ok, then I'm not sure there can be an issue with the syntax. I managed to disable FileVault from command line. I'm still waiting for it to complete, but I guess we'll see after that if it makes a difference or not. To disable FileVault from Terminal, use this (for anyone interested, in case you're stuck with greyed out "Turn Off FileVault" button like I was.) sudo fdesetup disable I actually, have similar question as @Arsadu. Fyi I'm using Single GPT Disk (SATA), on my case: ~ I've installed 10.13 Beta 1 using Core.pkg on HFS+ Partition w/o including "macOSUpd10.13.RecoveryHDUpdate.pkg" ~ I then converted it to APFS using DiskUtility.app within macOS USB Installer ~ First reboot with APFS took long time entering Desktop for unknown reason, but I figured out there was a new @615MB Partition named "Recovery" (w/o ~HD) under macOS 10.13. Second reboot, It appeared on Clover boot screen, but I couldn't boot into it. ~ I updated to 10.13 Beta 2 with including "macOSUpd10.13.RecoveryHDUpdate.pkg" (finally failed though) and then I get another new partition named "RecoveryHD". ~ So now, I have 2 Recovery Partitions and both are bootable 10.13 volumes. I think need to hide one of them within Clover's GUI. Clover Movies Theme credit: @Chris1111 Well, I'm not sure it's the same thing here. Mine was a FileVault entry point for the encrypted partition which wasn't encrypted anymore after reinstall. For hiding Recovery partitions though, see if fusion71au's post here can help. I didn't get the chance to use it since, in the meantime, I wiped the entire HDD (I only use it for High Sierra HDD testing, so I didn't actually lose anything) and reinstalled DP2 from scratch. 1 Link to comment Share on other sites More sharing options...
apianti Posted June 25, 2017 Share Posted June 25, 2017 What does this mean? IMG_3324.JPG It started happening with version 4097. I tried earlier versions and same problem. I reformatted my EFI partition and same problem. Nothing I can think of will stop this. Clover gets to the Clover menu but once I select a partition to boot, any partition, nothing happens and then I get this. I can still boot from a USB flash drive I have or I wouldn't be posting this. Any help would be greatly appreciated. It's a general protection fault meaning that memory was accessed outside of what the memory map said was accessible memory. Which one should I use? The Preboot one? None of the UUIDs above is the one displayed when pressing spacebar on Clover GUI for the APFS volume. This is what I have in Clover GUI. screenshot1.png I used the same method (UUID from spacebar) for all OSes. Renamed 2 of them with no issues. Why is it Clover Configurator's fault that the same exact syntax doesn't work for APFS FV2 drive? ) It's the same syntax for all of them. Only the UUID and the FullTitle are different. And the UUID for the APFS volume was not taken with CC in any way. So, I don't see how that could be a detection problem on CC's side. It's not even loaded when Clover starts. This is what I use for the regular FV2 HFS+ drive. And it works. Just took the UUID from CLOVER GUI, added it into the config, and there you go. Everything ok. SierraSSD is a HFS+ drive with FileVault. And now it's displayed as SierraSSD in Clover GUI. <key>Custom</key> <dict> <key>Entries</key> <array> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>SierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4</string> <key>VolumeType</key> <string>Internal</string> </dict> Please, let me know if this is the correct syntax. Now, the same exact syntax, only different UUID is used for the APFS FV encrypted partition. The one displayed as "Boot FileVault Preeboter from Preboot". So, since it's from Preboot, I suppose I need the Preboot UUID, right? So, neither the UUID displayed on spacebar or the one from diskutil info are working. So, assuming the information displayed in Clover GUI is not correct (though the same method worked for the other two volumes), I thought I would need to add the UUID of the Preboot volume, right? Which, apparently is not the one displayed in Clover GUI (on spacebar). So, like this: <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>HiSierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>3FD03752-1484-44BB-A298-DD20545A42DB</string> <key>VolumeType</key> <string>Internal</string> </dict> So, the only things that changed (and this has been edited on the config directly, no CC involved) is the UUID and the FullTitle, right? The only issue is that it doesn't work. The drive's name (the one I use to boot into HiSierraSSD), is still "Boot FileVault Preeboter from Preboot". What am I missing here...? ) Also, big thank you for your feedback and your help, so far. @fusion71au Thank you. In the meantime, I wiped the entire HDD and reinstalled High Sierra. The volume is still HiSierraHDD for this case. But I'll keep in mind your advice for the next time. Also, I'll try to hide those Recovery drives too, right after I finish with the renaming of the APFS FV encrypted volume... Which doesn't seem to work, for some weird reason. Is your APFS High Sierra volume also FV encrypted? You can just take any unique part of the identifier of the partition from your boot log and use that as the volume identifier, since it will compare with the whole device path string. It seems the last part of an APFS volume device path is the unique part. Unsure where those other UUIDs are from then and why on earth they wouldn't be directly used as the partition UUID when thats what they say they are in diskutil. I was saying the problem with CC is when CC is running, it can't correctly determine the UUIDs. It's obvious why, the APFS volumes don't have a consistent usage of them. I understand I need to use the last part... In my case 5237D03F8414BB44A298DD20545A42DB. Ok. But still, right now I'm not trying to hide the volume. I'm trying to rename it. And using the string above as OSX Custom Entry, replacing the one in my previous post (this 3FD03752-1484-44BB-A298-DD20545A42DB with this 5237D03F8414BB44A298DD20545A42DB), does nothing. Try changing the type of the volume to OSXRecovery or Other. @arsradu, Can you show your Clover boot log ie what is the output of running the dmesg command in terminal? Also can you show the GUI section of your config.plist? Eg for my system Vol 14=Preboot Vol 15=macOS_HS Vol 16=Recovery Vol 17=VM Notice the UUID I get from the Clover Menu for all 4 APFS volumes is the same: BA8FD576-FEF9-4BD2-95D0-EA399260C1D1 The unique UUID for Vol 14=Preboot on my system is the last one in the VenMedia section ie C28D6D496175AC4AA0B90D6F52620073. My High Sierra Volume is not encrypted so boot.efi is located on the actual volume (/System/Library/CoreServices/boot.efi in macOS_HS). For FileVault encrypted installs, I'm assuming this boot.efi is located in the Preboot volume instead. I think he has a different problem going on, you are right the unique part is the last section of the device path. I think he has a corrupted config.plist or something, as there is no custom entries scan taking place. Sure, here's my bdmesg. Last login: Sun Jun 25 15:17:33 on ttys000 192-168-0-103:~ jimmy$ bdmesg 0:100 0:100 MemLog inited, TSC freq: 3199991749 0:100 0:000 0:100 0:000 Now is 25.6.2017, 12:15:4 (GMT) 0:100 0:000 Starting Clover revision: 4097 on American Megatrends EFI 0:100 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.5 | XCODE: 8.3.3] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F5EE06E3-E943-412D-AC4B-44158E2A3195,0x28,0x64000) @DBF5E898 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 === [ Get Smbios ] ======================================== 0:100 0:000 Type 16 Index = 0 0:100 0:000 Total Memory Slots Count = 4 0:100 0:000 Type 17 Index = 0 0:100 0:000 Ignoring insane frequency value 65535MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = <null string> 0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string> 0:100 0:000 SmbiosTable.Type17->PartNumber = <null string> 0:100 0:000 Type 17 Index = 1 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = 0215 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMX8GX3M2A1600C11 0:100 0:000 Type 17 Index = 2 0:100 0:000 Ignoring insane frequency value 65535MHz 0:100 0:000 SmbiosTable.Type17->Speed = 0MHz 0:100 0:000 SmbiosTable.Type17->Size = 0MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = <null string> 0:100 0:000 SmbiosTable.Type17->SerialNumber = <null string> 0:100 0:000 SmbiosTable.Type17->PartNumber = <null string> 0:100 0:000 Type 17 Index = 3 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = 0215 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMX8GX3M2A1600C11 0:100 0:000 Boot status=0 0:100 0:000 Running on: 'MS-7922' with board ' Z97S SLI Krait Edition (MS-7922)' 0:100 0:000 === [ GetCPUProperties ] ================================== 0:100 0:000 CPU Vendor = 756E6547 Model=306C3 0:100 0:000 The CPU supported SSE4.1 0:100 0:000 The CPU supported turbo 0:100 0:000 BrandString = Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz 0:100 0:000 MSR 0xE2 before patch 1E008400 0:100 0:000 MSR 0xE2 is locked, PM patches will be turned on 0:100 0:000 MSR 0xCE 00080838_F3012000 0:100 0:000 MSR 0x1A0 00850089 0:100 0:000 corrected FLEX_RATIO = 0 0:100 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 0:100 0:000 MaxDiv/MinDiv: 32.0/8 0:100 0:000 Turbo: 36/36/36/36 0:100 0:000 Features: 0xBFEBFBFF 0:100 0:000 Threads: 4 0:100 0:000 Cores: 4 0:100 0:000 FSB: 25 MHz 0:100 0:000 CPU: 3200 MHz 0:100 0:000 TSC: 3200 MHz 0:100 0:000 PIS: 100 MHz 0:100 0:000 === [ GetDevices ] ======================================== 0:100 0:000 PCI (00|00:00.00) : 8086 0C00 class=060000 0:100 0:000 PCI (00|00:01.00) : 8086 0C01 class=060400 0:100 0:000 PCI (00|01:00.00) : 10DE 0FC6 class=030000 0:100 0:000 - GFX: Model=MSI GeForce GTX 650 family E7 (Nvidia) 0:100 0:000 PCI (00|01:00.01) : 10DE 0E1B class=040300 0:100 0:000 - HDMI Audio: 0:100 0:000 PCI (00|00:14.00) : 8086 8CB1 class=0C0330 0:100 0:000 PCI (00|00:16.00) : 8086 8CBA class=078000 0:100 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF 0:100 0:000 PCI (00|00:1A.00) : 8086 8CAD class=0C0320 0:100 0:000 PCI (00|00:1B.00) : 8086 8CA0 class=040300 0:100 0:000 PCI (00|00:1C.00) : 8086 8C90 class=060400 0:100 0:000 PCI (00|00:1C.02) : 8086 244E class=060401 0:100 0:000 PCI (00|03:00.00) : 1B21 1080 class=060400 0:100 0:000 PCI (00|00:1C.03) : 8086 8C96 class=060400 0:100 0:000 PCI (00|05:00.00) : 10EC 8168 class=020000 0:100 0:000 - LAN: 0 Vendor=Realtek 0:100 0:000 PCI (00|00:1D.00) : 8086 8CA6 class=0C0320 0:100 0:000 PCI (00|00:1F.00) : 8086 8CC4 class=060100 0:100 0:000 PCI (00|00:1F.02) : 8086 8C82 class=010601 0:100 0:000 PCI (00|00:1F.03) : 8086 8CA2 class=0C0500 0:100 0:000 === [ GetDefaultSettings ] ================================ 0:100 0:000 Clover load options size = 4 bytes 0:106 0:006 EFI\CLOVER\config.plist loaded: Success 0:106 0:000 === [ GetListOfThemes ] =================================== 0:116 0:010 - [00]: mimi black 0:124 0:007 - [01]: LIGHTUP 0:137 0:012 - [02]: RANDOM 0:138 0:001 - [02]: EMBEDDED 0:140 0:001 === [ Found config plists ] =============================== 0:140 0:000 - config-backup.plist 0:140 0:000 - config.plist 0:140 0:000 === [ GetEarlyUserSettings ] ============================== 0:140 0:000 timeout set to 5 0:140 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:140 0:000 Default theme: lightup 0:140 0:000 === [ LoadDrivers ] ======================================= 0:148 0:007 Loading AptioInputFixB2.efi status=Success 0:155 0:007 Loading OsxFatBinaryDrv-64.efi status=Success 0:155 0:000 Loading HFSPlus.efi status=Success 0:156 0:000 - driver needs connecting 0:156 0:000 Loading PartitionDxe-64.efi status=Success 0:156 0:000 - driver needs connecting 0:156 0:000 Loading AppleImageCodec-64.efi status=Success 0:157 0:000 Loading AppleUITheme-64.efi status=Success 0:158 0:000 Loading DataHubDxe-64.efi status=Success 0:162 0:004 Loading AppleKeyAggregator-64.efi status=Success 0:170 0:007 Loading APFS.EFI status=Success 0:180 0:010 - driver needs connecting 0:180 0:000 Loading OsxAptioFix2Drv-64.efi status=Success 0:180 0:000 Loading FSInject-64.efi status=Success 0:181 0:000 Loading FirmwareVolume-64.efi status=Success 0:182 0:000 Loading SMCHelper-64.efi status=Success 0:182 0:000 Loading NTFS.EFI status=Success 0:185 0:002 - driver needs connecting 0:185 0:000 4 drivers needs connecting ... 0:185 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:185 0:000 Partition driver loaded: CD disconnect Success 0:185 0:000 HFS+ driver loaded 0:185 0:000 APFS driver loaded 0:185 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:721 0:536 === [ InitScreen ] ======================================== 0:721 0:000 SetScreenResolution: 2560x1440 - already set 0:721 0:000 Console modes reported: 4, available modes: 0:721 0:000 - [01]: 80x25 0:721 0:000 - [02]: 80x50 0:721 0:000 - [03]: 100x31 0:721 0:000 - [04]: 128x40 (current mode) 0:721 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F5EE06E3-E943-412D-AC4B-44158E2A3195,0x28,0x64000) 0:721 0:000 === [ GetMacAddress ] ===================================== 0:721 0:000 MAC address of LAN #0= D8:CB:8A:C0:69:24: 0:721 0:000 === [ ScanSPD ] =========================================== 0:722 0:000 SMBus device : 8086 8CA2 class=0C0500 status=Success 0:722 0:000 SMBus CmdReg: 0x3 0:722 0:000 Scanning SMBus [8086:8CA2], mmio: 0xF7214004, ioport: 0xF000, hostc: 0x11 0:722 0:000 Slots to scan [8]... 0:722 0:000 SPD[1]: Type 11 @0x51 0:741 0:018 XMP Profile1: 10*1/8ns 0:741 0:000 Found module with XMP version 1.3 0:741 0:000 Using XMP Profile1 instead of standard frequency 1333MHz 0:741 0:000 DDR speed 1600MHz 0:741 0:000 Slot: 1 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMX8GX3M2A1600C11 SerialNo=0000000000000000 0:741 0:000 SPD[3]: Type 11 @0x53 0:760 0:018 XMP Profile1: 10*1/8ns 0:760 0:000 Found module with XMP version 1.3 0:760 0:000 Using XMP Profile1 instead of standard frequency 1333MHz 0:760 0:000 DDR speed 1600MHz 0:760 0:000 Slot: 3 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMX8GX3M2A1600C11 SerialNo=0000000000000000 0:760 0:000 === [ GetAcpiTablesList ] ================================= 0:761 0:000 Get Acpi Tables List from RSDT: 0:761 0:000 - [00]: FACP A M I len=132 0:761 0:000 - [01]: APIC A M I len=114 0:761 0:000 - [02]: FPDT A M I len=68 0:761 0:000 - [03]: FIDT A M I len=156 0:761 0:000 - [04]: ASF! HCG len=165 0:761 0:000 - [05]: SSDT Ther_Rvp len=3197 0:761 0:000 - [06]: SSDT Cpu0Ist len=1337 0:761 0:000 - [07]: SSDT CpuSsdt len=2932 0:761 0:000 - [08]: MCFG A M I len=60 0:761 0:000 - [09]: HPET A M I len=56 0:761 0:000 - [10]: SSDT SataTabl len=877 0:761 0:000 - [11]: SSDT SaSsdt len=22581 0:761 0:000 - [12]: UEFI A M I len=66 0:761 0:000 - [13]: DMAR BDW len=128 0:761 0:000 - [14]: BGRT A M I len=56 0:761 0:000 Calibrated TSC frequency =3199991749 =3199MHz 0:761 0:000 === [ GetUserSettings ] =================================== 0:761 0:000 USB FixOwnership: yes 0:761 0:000 Dropping 3 tables: 0:761 0:000 - [00]: Drop table signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043) 0:761 0:000 - set table: 54445353, 6D50757043 to drop: no 0:761 0:000 - [01]: Drop table signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043) 0:761 0:000 - set table: 54445353, 74734930757043 to drop: yes 0:761 0:000 - [02]: Drop table signature="DMAR" (52414D44) 0:761 0:000 - set table: 52414D44, 0 to drop: yes 0:761 0:000 - final DSDT Fix mask=1FE60000 0:761 0:000 ChassisType: 0xD 0:762 0:001 === [ ScanVolumes ] ======================================= 0:762 0:000 Found 20 volumes with blockIO 0:762 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 0:784 0:022 - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 0:784 0:000 Found optical drive 0:784 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 0:785 0:001 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 0:786 0:000 Result of bootcode detection: bootable unknown (legacy) 0:786 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F5EE06E3-E943-412D-AC4B-44158E2A3195,0x28,0x64000) 0:786 0:000 Result of bootcode detection: bootable unknown (legacy) 0:807 0:020 This is SelfVolume !! 0:807 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,38C6C1AE-2E2C-4FF8-8D72-9AC89395A11A,0x64028,0x4A6BE340) 0:807 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,D81935A0-CEC7-4AB4-834F-8572B93C1D72,0x4A722368,0x135F20) 0:837 0:030 - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,CFF624F8-C0C3-4448-A8A4-62A66193376C,0x28,0x64000) 0:838 0:000 Result of bootcode detection: bootable unknown (legacy) 0:843 0:004 - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0F773801-80BD-45F5-8F2F-C45790E3B5FB,0x64028,0xE906A10) 0:843 0:000 Result of bootcode detection: bootable unknown (legacy) 0:843 0:000 - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4,0xE96AA38,0x135F20) 0:844 0:000 - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0) 0:844 0:000 Result of bootcode detection: bootable unknown (legacy) 0:844 0:000 - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(5,GPT,DB0968EA-61E0-45D8-ADE3-FFE6F8ABE9EA,0x1D08D148,0x138800) 0:845 0:000 - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,4B8588D0-6E43-4B29-A475-0B1254F46C4A,0x28,0x64000) 0:846 0:000 Result of bootcode detection: bootable unknown (legacy) 0:872 0:026 - [13]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,1A2217AC-33B4-42D0-8D17-920E9FA99621,0x6C800,0x4BFD8A58) 0:873 0:000 - [14]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(3,GPT,0100BFD5-1EBF-4711-B9B2-33F00C91280D,0x4C085258,0x18EDDA8) 0:873 0:000 - [15]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(4,GPT,6E01D029-3175-43E1-9390-8D208CDAA12D,0x4D9B3000,0x26D53800) 0:874 0:000 - [16]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,5237D03F8414BB44A298DD20545A42DB) 0:874 0:000 - [17]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D88DC35029E2E930A5B91EF623E60C8A) 0:874 0:000 - [18]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,9F7EE4D96E588149A4F095855B0B59DF) 0:874 0:000 - [19]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,FBBB5C655D03A5408555A20AA841031B) 0:874 0:000 === [ InitTheme ] ========================================= 0:875 0:001 Using theme 'lightup' (EFI\CLOVER\themes\lightup) 0:875 0:000 OS main and drive as badge 0:879 0:003 Loading font from ThemeDir: Success 0:880 0:000 Choosing theme lightup 0:880 0:000 after NVRAM boot-args=-alcbeta -lilubeta 0:880 0:000 === [ Dump SMC keys from NVRAM ] ========================== 0:880 0:000 found AppleSMC protocol 0:899 0:019 === [ ScanLoader ] ======================================== 0:899 0:000 - [04]: 'EFI' 0:899 0:000 - [05]: 'HiSierraHDD' 0:952 0:053 AddLoaderEntry for Volume Name=HiSierraHDD 0:978 0:025 Check if volume Is Hibernated: 0:978 0:000 Check sleep image 'by signature': 1:032 0:053 read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success 1:032 0:000 using default sleep image name = \private\var\vm\sleepimage 1:052 0:019 no valid sleep image offset was found 1:052 0:000 sleepimage offset could not be acquired 1:052 0:000 hibernated: no - sign 1:072 0:020 not png, try icns 1:073 0:000 not png, try icns 1:073 0:000 - [06]: 'Recovery HD' 1:110 0:036 AddLoaderEntry for Volume Name=Recovery HD 1:152 0:042 not png, try icns 1:152 0:000 not png, try icns 1:153 0:000 - [07]: 'EFI' 1:153 0:000 - [09]: 'Recovery HD' 1:155 0:002 AddLoaderEntry for Volume Name=Recovery HD 1:156 0:000 Check if volume Is Hibernated: 1:156 0:000 Check sleep image 'by signature': 1:156 0:000 using default sleep image name = \private\var\vm\sleepimage 1:156 0:000 sleepimage not found -> Not Found 1:156 0:000 hibernated: no - sign 1:157 0:000 not png, try icns 1:157 0:000 AddLoaderEntry for Volume Name=Recovery HD 1:158 0:001 not png, try icns 1:159 0:000 - [12]: 'EFI' 1:159 0:000 - [13]: 'Storage' 1:159 0:000 - [14]: 'Stuff' 1:159 0:000 - [15]: 'Tools' 1:159 0:000 - [16]: 'Preboot' 1:161 0:002 AddLoaderEntry for Volume Name=Preboot 1:164 0:002 Check if volume Is Hibernated: 1:164 0:000 Check sleep image 'by signature': 1:164 0:000 using default sleep image name = \private\var\vm\sleepimage 1:164 0:000 sleepimage not found -> Not Found 1:164 0:000 hibernated: no - sign 1:164 0:000 not png, try icns 1:166 0:001 - [17]: 'HiSerraSSD' 1:166 0:000 - [18]: 'Recovery' 1:167 0:001 AddLoaderEntry for Volume Name=Recovery 1:169 0:001 not png, try icns 1:170 0:001 - [19]: 'VM' 1:170 0:000 === [ AddCustomTool ] ===================================== 1:178 0:007 found tool \EFI\CLOVER\tools\Shell64U.efi 1:178 0:000 Checking EFI partition Volume 4 for Clover 1:178 0:000 Found Clover 1:182 0:003 === [ GetEfiBootDeviceFromNvram ] ========================= 1:182 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,5237D03F8414BB44A298DD20545A42DB) 1:182 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,5237D03F8414BB44A298DD20545A42DB)' 1:182 0:000 - LoaderPath: '<null string>' 1:182 0:000 - Guid = DCD35DBA-904C-4F0A-801D-1037CADFD0CB 1:182 0:000 === [ FindStartupDiskVolume ] ============================= 1:182 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(4,GPT,DCD35DBA-904C-4F0A-801D-1037CADFD0CB,0xEAA0958,0xE5EC7F0)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,5237D03F8414BB44A298DD20545A42DB) 1:182 0:000 - searching for that partition 1:182 0:000 - found entry 4. 'Boot FileVault Prebooter from Preboot', Volume 'Preboot' 1:182 0:000 Boot redirected to Entry 4. 'Boot FileVault Prebooter from Preboot' 1:182 0:000 DefaultIndex=4 and MainMenu.EntryCount=12 1:244 0:062 GUI ready 7:257 6:012 === [ StartLoader ] ======================================= 7:257 0:000 Finally: Bus=99999kHz CPU=3200MHz 7:257 0:000 Loading boot.efi status=Success 7:268 0:010 GetOSVersion: 10.13 (17A291j) 7:268 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM 7:268 0:000 === [ PatchSmbios ] ======================================= 7:268 0:000 insert table 9 for dev 0:0 7:268 0:000 insert table 9 for dev 0:1 7:268 0:000 insert table 9 for dev 0:0 7:269 0:000 Channels: 2 7:269 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 7:269 0:000 SMBIOS Type 17 Index = 0 => 0 0: 7:269 0:000 BANK 0 DIMM0 EMPTY 7:269 0:000 SMBIOS Type 17 Index = 1 => 2 2: 7:269 0:000 BANK 1 DIMM0 EMPTY 7:269 0:000 SMBIOS Type 17 Index = 2 => 1 1: 7:269 0:000 BANK 0 DIMM1 1600MHz 4096MB 7:269 0:000 SMBIOS Type 17 Index = 3 => 3 3: 7:269 0:000 BANK 1 DIMM1 1600MHz 4096MB 7:269 0:000 mTotalSystemMemory = 8192 7:269 0:000 NumberOfMemoryDevices = 4 7:269 0:000 Type20[0]->End = 0x3FFFFF, Type17[2] = 0x1000 7:269 0:000 Type20[1]->End = 0x7FFFFF, Type17[3] = 0x3000 7:269 0:000 Table 131 is present, CPUType=35 7:269 0:000 Change to: 605 7:269 0:000 === [ PatchACPI ] ========================================= 7:269 0:000 RSDT 0xDE7C2028 7:269 0:000 FADT from RSDT: 0xDE7C2138 7:269 0:000 XSDT 0xDE7C2090 7:269 0:000 FADT from XSDT: 0xDE7D4D58 7:269 0:000 Xsdt reallocation done 7:269 0:000 old FADT length=10C 7:269 0:000 Found OperationRegion(GNVS, SystemMemory, DE7F5C18, ...) 7:269 0:000 Found OperationRegion(PNVA, SystemMemory, DE7F6D98, ...) 7:269 0:000 Found OperationRegion(CPSB, SystemMemory, DE2B0E98, ...) 7:269 0:000 Found OperationRegion(TMMB, SystemMemory, FED40000, ...) 7:269 0:000 Found OperationRegion(ABNV, SystemMemory, DE7F0000, ...) 7:269 0:000 Found OperationRegion(GCAD, SystemMemory, DE7DF018, ...) 7:269 0:000 Found OperationRegion(PRFA, SystemMemory, DE7DD018, ...) 7:269 0:000 Apply DsdtFixMask=0x1FE60000 7:269 0:000 drop _DSM mask=0x0000 7:269 0:000 === [ FixBiosDsdt ] ======================================= 7:269 0:000 VideoCard devID=0xFC610DE 7:269 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 7:269 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE 7:269 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE 7:493 0:224 Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1) 7:493 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE 7:493 0:000 first CPU found at 87C4 offset 87C7 7:493 0:000 score candidate at 87C0 7:493 0:000 score inserted in acpi_cpu_score _PR_ 7:493 0:000 Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_ 7:494 0:000 Found PCIROOTUID = 0 7:494 0:000 Start RTC Fix 7:494 0:000 found RTC Length not match, Maybe will case CMOS reset will patch it. 7:494 0:000 found RTC had IRQNoFlag will move -3 bytes 7:494 0:000 ...len=12B8F 7:494 0:000 new size written to 2251 shift=0 len=12B8F 7:494 0:000 len after correct outers 12B8F 7:494 0:000 Start TMR Fix 7:494 0:000 Start HDMI5 Fix 7:494 0:000 have no HDMI device while HDMIADR2=1 7:494 0:000 HDMIADR1=10000 HDMIADR2=1 7:494 0:000 with default properties 7:494 0:000 Start _WAK Return Fix 7:494 0:000 _WAK Method find return data, don't need to patch. 7:494 0:000 return len=12C08 7:494 0:000 deleting device CRT_ 7:494 0:000 deleting device DVI_ 7:494 0:000 deleting device SPKR 7:495 0:000 deleting device ECP_ 7:495 0:000 deleting device LPT_ 7:495 0:000 deleting device FDC0 7:495 0:000 deleting device ECP1 7:495 0:000 deleting device LPT1 7:496 0:000 Start PNLF Fix 7:496 0:000 found PWRB at 51ED 7:496 0:000 Start _S3D Fix 7:496 0:000 indirect name=PNVB 7:496 0:000 Start ADP1 fix 7:496 0:000 no device(AC) exists 7:497 0:000 === [ ACPIDropTables ] ==================================== 7:497 0:000 Drop tables from Xsdt, SIGN=DMAR TableID=BDW Length=128 7:497 0:000 Xsdt has tables count=15 7:497 0:000 Table: DMAR BDW 128 dropped 7:497 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=1337 7:497 0:000 Xsdt has tables count=14 7:497 0:000 Table: SSDT Cpu0Ist 1337 dropped 7:497 0:000 === [ PatchAllSSDT ] ====================================== 7:497 0:000 Patch table: SSDT Ther_Rvp len=0xC7D 7:497 0:000 Patch table: SSDT CpuSsdt len=0xB74 7:497 0:000 Patch table: SSDT SataTabl len=0x36D 7:497 0:000 Patch table: SSDT SaSsdt len=0x5835 7:497 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0 7:497 0:000 Xsdt has tables count=13 7:497 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4 7:497 0:000 Maximum control=0x20 7:497 0:000 Turbo control=0x24 7:497 0:000 P-States: min 0x8, max 0x24 7:497 0:000 SSDT with CPU P-States generated successfully 7:497 0:000 SSDT with CPU C-States generated successfully 7:497 0:000 === [ RestSetup macOS ] =================================== 7:497 0:000 EdidDiscovered size=128 7:497 0:000 ------- EDID Table 7:497 0:000 000 | 00 FF FF FF FF FF FF 00 41 0C 7:497 0:000 010 | E9 08 62 12 00 00 24 19 01 03 7:497 0:000 020 | 80 37 1F 78 2A A3 75 B0 4C 38 7:497 0:000 030 | B5 26 0C 50 54 BD 4B 00 D1 C0 7:497 0:000 040 | 81 80 81 40 95 0F 95 00 B3 00 7:497 0:000 050 | 81 C0 01 01 56 5E 00 A0 A0 A0 7:497 0:000 060 | 29 50 30 20 35 00 29 37 21 00 7:497 0:000 070 | 00 1E 00 00 00 FF 00 55 48 42 7:497 0:000 080 | 31 35 33 36 30 30 34 37 30 36 7:497 0:000 090 | 00 00 00 FC 00 50 48 4C 20 32 7:497 0:000 100 | 35 38 42 36 51 4A 45 42 00 00 7:497 0:000 110 | 00 FD 00 32 4C 1E 63 21 00 0A 7:497 0:000 120 | 20 20 20 20 20 20 00 0B 7:497 0:000 NVidia GFX injection not set 7:497 0:000 setting specified layout-id=1 (0x1) 7:497 0:000 stringlength = 2270 7:497 0:000 CurrentMode: Width=2560 Height=1440 7:497 0:000 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D9A72C18 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D9A72C18 7:515 0:017 Use origin smbios table type 1 guid. 7:521 0:006 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 7:537 0:015 Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext 7:543 0:005 Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext 7:565 0:022 Extra PlugIn kext: EFI\CLOVER\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext 7:627 0:061 Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext 7:638 0:011 Extra kext: EFI\CLOVER\kexts\Other\FakePCIID_XHCIMux.kext 7:646 0:007 Extra kext: EFI\CLOVER\kexts\Other\FakePCIID.kext 7:650 0:004 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext 7:661 0:011 SetStartupDiskVolume: 7:661 0:000 * Volume: 'Preboot' 7:661 0:000 * LoaderPath: '<null string>' 7:661 0:000 * DevPath: Preboot 7:661 0:000 * GUID = DCD35DBA-904C-4F0A-801D-1037CADFD0CB 7:662 0:000 * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>DCD35DBA-904C-4F0A-801D-1037CADFD0CB</string></dict></dict></dict></array> 7:662 0:000 Custom boot is disabled and the GUI section from config: <key>GUI</key> <dict> <key>Custom</key> <dict> <key>Entries</key> <array> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>HiSierraHDD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>38C6C1AE-2E2C-4FF8-8D72-9AC89395A11A</string> <key>VolumeType</key> <string>Internal</string> </dict> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>SierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>6C5331E7-AF77-4D12-AB6C-5BCF1AC6EDE4</string> <key>VolumeType</key> <string>Internal</string> </dict> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>HiSierraSSD</string> <key>Ignore</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>5237D03F8414BB44A298DD20545A42DB</string> <key>VolumeType</key> <string>Internal</string> </dict> </array> </dict> I don't see the AddCustomEntries section in your boot.log. It should come before the ScanLoader section. Please post your boot.log and config.plist as attachments. @arsradu, Can you also show the GUI section from your config.plist? Maybe try removing the "scan" section and only relying on custom entries? Your boot log confirms the unique UUID for the Preboot Volume is 5237D03F8414BB44A298DD20545A42DB. but doesn't look like your custom entries are working (only autoscan by Clover)? PS: I recommend you edit your config.plist with a plist editor like Xcode to avoid syntax errors.... Yeah there's something wrong. There is no custom entry scan. Should now be included. I edited my post earlier. Yep, that was very useful information. Thank you! However, I think that the fact that my APFS drive is also encrypted with FileVault...makes all the difference. And now I'm trying to decrypt it to see if it works, and the Turn Off FileVault is greyed out... And yes, even after unlocking that section. Anyway, that's another topic. Thank you very much for your feedback! No, encryption does not matter because the parts that are needed to boot must be unencrypted or you couldn't boot. There's something else going on. is the Apple folder and its contents that are located in the EFI partition critical for booting? When I reformatted my EFI partition in an effort to fix the problems referenced here http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=2450961, I lost the Apple folder. Might that explain why I cannot boot from my system drive's EFI partition? Nope not at all. It's only used as a storage for EFI firmware update payload .scap files. It is useless for a non-mac. If you reformatted the drive, which no idea why you did that, then did you reinstall anything that was on it? Like clover? Or fix your firmware boot entries (if you made one for clover)? Or repair any other OSes you have? Not a good idea to format your ESP if you have working OSes. EDIT: Are you booting legacy? Or is that happening in the GUI? But the issue is in the code so formatting your partition was probably never going to help. I actually, have similar question as @Arsadu. Fyi I'm using Single GPT Disk (SATA), on my case: ~ I've installed 10.13 Beta 1 using Core.pkg on HFS+ Partition w/o including "macOSUpd10.13.RecoveryHDUpdate.pkg" ~ I then converted it to APFS using DiskUtility.app within macOS USB Installer ~ First reboot with APFS took long time entering Desktop for unknown reason, but I figured out there was a new @615MB Partition named "Recovery" (w/o ~HD) under macOS 10.13. Second reboot, It appeared on Clover boot screen, but I couldn't boot into it. ~ I updated to 10.13 Beta 2 with including "macOSUpd10.13.RecoveryHDUpdate.pkg" (finally failed though) and then I get another new partition named "RecoveryHD". ~ So now, I have 2 Recovery Partitions and both are bootable 10.13 volumes. I think need to hide one of them within Clover's GUI. Clover Movies Theme credit: @Chris1111 I would probably remove the one that doesn't work and expand whatever OS partition you can. Or reinstall. But yeah hide the recovery with either GUI/Hide or GUI/Custom/Entries. Well, they are working for the other volumes I edited.... It's just this one that doesn't seem to work. I edited with Xcode, but if the rest of the Clover GUI config is ok, then I'm not sure there can be an issue with the syntax. I managed to disable FileVault from command line. I'm still waiting for it to complete, but I guess we'll see after that if it makes a difference or not. To disable FileVault from Terminal, use this (for anyone interested, in case you're stuck with greyed out "Turn Off FileVault" button like I was.) sudo fdesetup disable Well, I'm not sure it's the same thing here. Mine was a FileVault entry point for the encrypted partition which wasn't encrypted anymore after reinstall. For hiding Recovery partitions though, see if fusion71au's post here can help. I didn't get the chance to use it since, in the meantime, I wiped the entire HDD (I only use it for High Sierra HDD testing, so I didn't actually lose anything) and reinstalled DP2 from scratch. You should only disable filevault in recovery, lol. Link to comment Share on other sites More sharing options...
arsradu Posted June 25, 2017 Share Posted June 25, 2017 @apanti I tried setting that as OSXRecovery. No change. I didn't find an option to disable FileVault from Recovery. I already tried. You can only unlock the volume, which doesn't help much. But I couldn't find an option to decrypt it permanently. However, I managed to do that with the command above. Which brings me to the next issue: 7 boot entries. Again. This time, the extra one is the "FileVault Prebooter". But there is no FileVault, so not sure what the hell is that doing there. And a regular boot for HiSierraSSD (unencrypted volume). Also, a dedicated recovery, just like before. ALL pointing to the same UUID. Anyway, boot.log and config.plist attached. EDIT: Ok, we can rule out CC from this. Why? Well, because it works perfectly fine on the non-encrypted disk. So it's not the fact that I'm editing the config with CC. I'm not defending it. I'm just saying this issue has nothing to do with that. I had the exact same issue when I edited it with Xcode, and even manually with Sublime. Now, all I had to do was to point the unencrypted partition to the UUID displayed in Clover UI (on spacebar). Just like I did for the other partitions. And it works. So, it looks like the problem appears when using APFS with FileVault. FileVault on HFS works, HFS alone works, APFS alone works. But FileVault on APFS does not. Maybe we're not pointing it in the right direction. Or maybe it needs something else. But these are my results so far. So I hope it helps. bootlog.log.txt config_test.plist.zip Link to comment Share on other sites More sharing options...
Recommended Posts