kushwavez Posted November 14, 2020 Share Posted November 14, 2020 (edited) @naiclub you can download them from the guides linked in my signature (except for Notebook 2, that's not quite ready yet) Edited November 14, 2020 by kushwavez 1 Link to comment Share on other sites More sharing options...
matxpa Posted November 14, 2020 Share Posted November 14, 2020 naiclub Have you seen in your "Terminal saved output.text", 188 Warnings 1 Link to comment Share on other sites More sharing options...
naiclub Posted November 14, 2020 Share Posted November 14, 2020 12 minutes ago, matxpa said: naiclub Have you seen in your "Terminal saved output.text", 188 Warnings If there are too many warnings Will have a negative effect or not Can you explain to me Link to comment Share on other sites More sharing options...
iCanaro Posted November 14, 2020 Share Posted November 14, 2020 for those who have compilation errors, see here https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?do=findComment&comment=2743568 2 Link to comment Share on other sites More sharing options...
naiclub Posted November 14, 2020 Share Posted November 14, 2020 38 minutes ago, iCanaro said: for those who have compilation errors, see here https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?do=findComment&comment=2743568 Terminal Saved Output1.text Same symptoms There are 188 lines of warnings. Link to comment Share on other sites More sharing options...
SavageAUS Posted November 14, 2020 Share Posted November 14, 2020 On 11/12/2020 at 11:40 PM, iCanaro said: test config-Install_BS-SavageAUS.plist if you still have problems move other lilu weg virtualsmc/fakesmc to the other folder With that config i was able to finish installing BS. Should i continue to use it for booting or try go back to my default one? Link to comment Share on other sites More sharing options...
SavageAUS Posted November 14, 2020 Share Posted November 14, 2020 On 11/13/2020 at 10:45 AM, iCanaro said: Spoiler Which theme is this? Link to comment Share on other sites More sharing options...
chris1111 Posted November 14, 2020 Share Posted November 14, 2020 @SavageAUS the theme is OCIntegration 1 Link to comment Share on other sites More sharing options...
iCanaro Posted November 14, 2020 Share Posted November 14, 2020 35 minutes ago, SavageAUS said: With that config i was able to finish installing BS. Should i continue to use it for booting or try go back to my default one? great very well that config you can also continue to use it, know that it only works for catalina and big sur, so it would not start mojave and high sierra 1 Link to comment Share on other sites More sharing options...
Jief_Machak Posted November 14, 2020 Share Posted November 14, 2020 3 hours ago, naiclub said: Terminal Saved Output1.text Same symptoms There are 188 lines of warnings. I think warning about no debug symbol is ok. Don't know why they are here... 1 Link to comment Share on other sites More sharing options...
naiclub Posted November 14, 2020 Share Posted November 14, 2020 1 hour ago, Jief_Machak said: I think warning about no debug symbol is ok. Don't know why they are here... Spoiler bdmesg.text Latest clover 5126 works fine. Link to comment Share on other sites More sharing options...
matxpa Posted November 14, 2020 Share Posted November 14, 2020 F.Y.I Clover build with XCODE8 ---> 188 warnings (most of them : "warning: no debug symbols in executable (-arch x86_64)") with GCC53 ---> 6 errors ... ignored ( ...BdsDxeOffset.raw] Error 1 (ignored), .../SmbiosGenDxeOffset.raw] Error 1 (ignored) and .../DisplayEngineOffset.raw] Error 1 (ignored) 1 Link to comment Share on other sites More sharing options...
mnfesq Posted November 14, 2020 Share Posted November 14, 2020 For weeks, I have been unable to use Clover to boot my laptop. Initially, I was able to use v.5124 but I had to reformat the hard drive I stored that in and when I downloaded it again, the new package didn't work. Since then, 5125 and 5126 also did not work. Every time, I got to the Clover menu page, completed the initial Clover boot and started the macOS boot and, during the first stage, it stopped at the same place. The first photo shows where it stopped and the second photo shows the same entry when successfully booting with OC 0.63. Spoiler I have tried every possible configuration change and was beating myself up for not being able to figure out what I did wrong. Today, I happened to see a link to CLOVERX64-5126-7f1b87c92.efi and gave that a try. When I boot to BS preboot, it works like a charm. Any ideas what caused my problem and what changed in this newer build of the Clover efi file? It is a relief to be able to use Clover again. 1 Link to comment Share on other sites More sharing options...
Jief_Machak Posted November 14, 2020 Share Posted November 14, 2020 20 minutes ago, mnfesq said: Any ideas what caused my problem and what changed in this newer build of the Clover efi file To know, you would have to try every commit, without changing configuration, until it doesn't work. There was like 10 commits between 5126 and now... Glag it's working now. Link to comment Share on other sites More sharing options...
naiclub Posted November 14, 2020 Share Posted November 14, 2020 27 minutes ago, Jief_Machak said: To know, you would have to try every commit, without changing configuration, until it doesn't work. There was like 10 commits between 5126 and now... Glag it's working now. Spoiler bdmesg.text.log This version installs the same as the latest clover5126, great. Link to comment Share on other sites More sharing options...
chris1111 Posted November 14, 2020 Share Posted November 14, 2020 (edited) New program for Clover user and Wifi USB adapter on Big Sur ➤ WirelessAdapterCloverBigSur maybe that can help some user with a non working wifi on laptop in BS Edited November 14, 2020 by chris1111 3 Link to comment Share on other sites More sharing options...
PG7 Posted November 14, 2020 Share Posted November 14, 2020 6 minutes ago, chris1111 said: New program for Clover user and Wifi USB adapter on Big Sur ➤ WirelessAdapterCloverBigSur maybe that can help some user with a non working wifi on laptop in BS good night Chris you could also try to create a way to make these kext if you load directly into the Big Sur kernel for Atheros! I have it here and I’m using it on Clover but it’s always a little tricky to load it directly with Clover (I don’t know why) with Clover they always carry it! Thanks for any answer if you need someone to test the signal I can do have a good night Link to comment Share on other sites More sharing options...
chris1111 Posted November 14, 2020 Share Posted November 14, 2020 8 minutes ago, PG7 said: good night Chris you could also try to create a way to make these kext if you load directly into the Big Sur kernel for Atheros! I have it here and I’m using it on Clover but it’s always a little tricky to load it directly with Clover (I don’t know why) with Clover they always carry it! Thanks for any answer if you need someone to test the signal I can do have a good night thanks I have already try the kext you mention but I have also trouble with I give up on Atheros because even on Mojave or Catalina the Wifi signal is very poor, compare for example to Realtek USB Wifi. I still have a functional Atheros in a Catalina on one of my Dell Optiplex but it is only in principle to install it Link to comment Share on other sites More sharing options...
naiclub Posted November 14, 2020 Share Posted November 14, 2020 Spoiler bdmesg.log sierra good working at last 26 clover Link to comment Share on other sites More sharing options...
iCanaro Posted November 14, 2020 Share Posted November 14, 2020 (edited) On 11/12/2020 at 2:14 PM, Jief_Machak said: On 11/12/2020 at 12:31 PM, iCanaro said: notes to developers: on AMD systems, but not only that, I also think of notebooks with I2C, for some kext it is very important that a certain loading order is defined. For example, on my AMD X570 AMDRyzenCPUPowerManagement.kext must be loaded before SMCAMDProcessor.kext; At the same time, AMDRyzenCPUPowerManagement.kext must be loaded after VirtualSMC.kext; but VirtualSMC is also a LILU plugin, so LILU must be at the top of the load order. All this serves for the perfect functioning and integration of the various kexts now on clover the only distinction is that the kexts in the other folder will be loaded as a priority over kexts in folders 10.xx 11 IMHO would be useful to have the ability to define load order for kexts, if not for everyone, but for some When can put this kext in the hard coded order list. (please everybody, don't start with "it's bad to hard code, etc."). I understand that they have now been included in Clover's code, other kexts with a specific loading order If so, could you check if everything is OK? I ask this because now inserting SMCAMDProcessor always gives me kernel panic with Catalina, instead no problem with mojave and big sur this is the author specification of AMDRyzenCPUPowerManagement and SMCAMDProcessor, how they should be loaded and dependencies.https://github.com/trulyspinach/SMCAMDProcessor I previously wanted AMDRyzenCPUPowerManagement in the OTHER folder and SMCAMDProcessor folder on 11 10.15 10.14 now other is empty and I keep the kexts in its folder for each macOS. Even returning to the old way, mojave and big sur ok no problem, instead always catalina kernel panic to the boot related to SMCAMDProcessor Thank you @Jief_Machak Spoiler Anonymous UUID: 123AB5B9-6820-7F6F-B0EC-5D96D491A1D2 Sun Nov 15 01:21:50 2020 *** Panic Report *** panic(cpu 26 caller 0xffffff801e2449ea): Kernel trap at 0xffffff7fa3ecbc71, type 14=page fault, registers: CR0: 0x0000000080010033, CR2: 0x000000001de00000, CR3: 0x0000000030735000, CR4: 0x00000000003406e0 RAX: 0x000000001de00000, RBX: 0xffffff8066ece000, RCX: 0x0000000000000000, RDX: 0x0000000001000000 RSP: 0xffffff83d5dfbdd0, RBP: 0xffffff83d5dfbde0, RSI: 0xffffff8066ece000, RDI: 0xffffff80670ebe20 R8: 0xffffff80670e4060, R9: 0x0000000000000006, R10: 0xaaaaaaaaaaaaaaab, R11: 0x0000000000000002 R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0xffffff80670ebe20, R15: 0xffffff80670ebe20 RFL: 0x0000000000010202, RIP: 0xffffff7fa3ecbc71, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0x000000001de00000, Error code: 0x0000000000000000, Fault CPU: 0x1a, PL: 0, VF: 1 Backtrace (CPU 26), Frame : Return Address 0xffffff83d5dfb830 : 0xffffff801e11868d mach_kernel : _handle_debugger_trap + 0x49d 0xffffff83d5dfb880 : 0xffffff801e252ab5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff83d5dfb8c0 : 0xffffff801e24463e mach_kernel : _kernel_trap + 0x4ee 0xffffff83d5dfb910 : 0xffffff801e0bea40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d5dfb930 : 0xffffff801e117d57 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff83d5dfba30 : 0xffffff801e118147 mach_kernel : _panic_trap_to_debugger + 0x227 0xffffff83d5dfba80 : 0xffffff801e8bf2bc mach_kernel : _panic + 0x54 0xffffff83d5dfbaf0 : 0xffffff801e2449ea mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff83d5dfbc70 : 0xffffff801e2446e8 mach_kernel : _kernel_trap + 0x598 0xffffff83d5dfbcc0 : 0xffffff801e0bea40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d5dfbce0 : 0xffffff7fa3ecbc71 wtf.spinach.SMCAMDProcessor : __ZN15SMCAMDProcessor5startEP9IOService + 0x25 0xffffff83d5dfbde0 : 0xffffff801e804dc6 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffff83d5dfbe40 : 0xffffff801e804901 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xad1 0xffffff83d5dfbef0 : 0xffffff801e803c9e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2de 0xffffff83d5dfbf50 : 0xffffff801e806456 mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x186 0xffffff83d5dfbfa0 : 0xffffff801e0be13e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: wtf.spinach.SMCAMDProcessor(1.0)[5384C3B3-8A06-38B0-A983-DD7567476396]@0xffffff7fa3eca000->0xffffff7fa3ed2fff dependency: as.vit9696.Lilu(1.4.9)[6E38576B-9675-3D9E-9763-5B0F9DA1B098]@0xffffff7fa3e87000 dependency: as.vit9696.VirtualSMC(1.1.8)[3BC5157C-7E87-31A4-8C61-3770E078BA73]@0xffffff7fa3eb1000 dependency: com.apple.iokit.IOPCIFamily(2.9)[2F37AE58-E6B9-3B18-9092-3B80D34C334B]@0xffffff7f9ed1a000 dependency: com.apple.kec.Libm(1)[5B023622-E5C0-32FB-9731-6D82AAAA7397]@0xffffff7f9eb5f000 dependency: wtf.spinach.AMDRyzenCPUPowerManagement(0.6.3)[03176D75-8A9F-36D2-A619-E3CC890AE4D3]@0xffffff7fa59fe000 BSD process name corresponding to current thread: kernel_task Boot args: -v keepsyms=1 debug=0x100 -inniebeta Mac OS version: Not yet set Kernel version: Darwin Kernel Version 19.6.0: Thu Oct 29 22:56:45 PDT 2020; root:xnu-6153.141.2.2~1/RELEASE_X86_64 Kernel UUID: 9B5A7191-5B84-3990-8710-D9BD9273A8E5 Kernel slide: 0x000000001de00000 Kernel text base: 0xffffff801e000000 __HIB text base: 0xffffff801df00000 System model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94) System shutdown begun: NO Panic diags file unavailable, panic occurred prior to initialization System uptime in nanoseconds: 944549369 EOF Model: iMacPro1,1, BootROM 1037.120.87.0.0, 16 processors, 3,50 GHz, 32 GB, SMC Graphics: Vega 10 XL/XT [Asus Arez Vega56], Vega 10 XL/XT [Asus Arez Vega56], spdisplays_pcie_device, 8 GB Memory Module: BANK 0/DIMM0, 8 GB, DDR4, 2133 MHz, Unknown, 3733 C17 Series Memory Module: BANK 1/DIMM0, 8 GB, DDR4, 2133 MHz, Unknown, 3733 C17 Series Memory Module: BANK 2/DIMM0, 8 GB, DDR4, 2133 MHz, Unknown, 3733 C17 Series Memory Module: BANK 3/DIMM0, 8 GB, DDR4, 2133 MHz, Unknown, 3733 C17 Series Bluetooth: Version 6.0.14d11, 3 services, 17 devices, 1 incoming serial ports Network Service: Ethernet, Ethernet, en0 PCI Card: FCH SMBus Controller, SMBus, Built In PCI Card: Matisse USB 3.0 Host Controller, USB controller #3, Built In PCI Card: Realtek ALC1220 Codec, Analog Audio device, Built In PCI Card: Vega 10 XL/XT [Asus Arez Vega56], Display Controller, PCIe-4 Slot-1 PCI Card: Vega 10 HDMI Audio [Asus Arez Vega56], HDMI/DP Audio device, PCIe-4 Slot-1 PCI Card: Realtek RTL8125A PCI Express 2.5 Gigabit Ethernet, Ethernet controller, Built In PCI Card: Wi-Fi 6 AX200, Network controller, Built In PCI Card: FCH SATA Controller [AHCI mode], SATA controller #2, Built In PCI Card: FCH SATA Controller [AHCI mode], SATA controller #1, Built In PCI Card: Matisse USB 3.0 Host Controller, USB controller #1, Built In PCI Card: Matisse USB 3.0 Host Controller, USB controller #2, Built In Serial ATA Device: SanDisk SDSSDH32000G, 2 TB Serial ATA Device: SATA3 2TB SSD, 2 TB Serial ATA Device: WDC WD30EFRX-68EUZN0, 3 TB Serial ATA Device: WDC WD30EFRX-68EUZN0, 3 TB USB Device: USB 3.1 Bus USB Device: USB2.0 Hub USB Device: MYSTIC LIGHT USB Device: USB 3.1 Bus USB Device: USB 2.0 Hub USB Device: USB OPTICAL MOUSE USB Device: Trust Keyboard USB Device: Bluetooth HCI USB Device: USB 3.1 Bus USB Device: USB OPTICAL MOUSE Thunderbolt Bus: Edited November 15, 2020 by iCanaro 1 Link to comment Share on other sites More sharing options...
PG7 Posted November 14, 2020 Share Posted November 14, 2020 13 minutes ago, chris1111 said: thanks I have already try the kext you mention but I have also trouble with I give up on Atheros because even on Mojave or Catalina the Wifi signal is very poor, compare for example to Realtek USB Wifi. I still have a functional Atheros in a Catalina on one of my Dell Optiplex but it is only in principle to install it here I am with her in Big Sur 20B29 with Clover r5126 this is working normal as in all systems! Spoiler 1 Link to comment Share on other sites More sharing options...
iCanaro Posted November 15, 2020 Share Posted November 15, 2020 (edited) today in the X570 AMD hack I ran the security update 2020-006 for high sierra, started and completed using OpenCore, as finished, restarted with Clover and..... Surprise! the bigsur preboot systemversion has been changed. This, in my opinion, closes the question that the problem may be Clover, but it is linked to high sierra and it may be that I keep it in HFS+ Spoiler Edited November 15, 2020 by iCanaro 1 Link to comment Share on other sites More sharing options...
LockDown Posted November 15, 2020 Share Posted November 15, 2020 Can i just add ExtendBTFeatureFlags (Bt4lecontinuity replacement) in quirks section and it will just work in clover? Link to comment Share on other sites More sharing options...
Matgen84 Posted November 15, 2020 Share Posted November 15, 2020 8 minutes ago, ellaosx said: Can i just add ExtendBTFeatureFlags (Bt4lecontinuity replacement) in quirks section and it will just work in clover? I think not because this quirk must be declared in the various Clover code files to work. 1 Link to comment Share on other sites More sharing options...
MICKHAEL Posted November 15, 2020 Share Posted November 15, 2020 hello to all, I just what to inform, if someone have blackscreen symptom, like Clover are not loading, check your UEFI drivers folder, and change HfsPlus.efi to Vboxhfs.efi Quote 2 Link to comment Share on other sites More sharing options...
Recommended Posts