SavageAUS Posted October 17, 2020 Share Posted October 17, 2020 10 minutes ago, Cyberdevs said: @SavageAUS I had the same KP issue with my Z170X Rig so I updated the FakeSMC and removed the old plugins and deleted the Quirks section from Clover's plist and just copied them from my working PC config and it solved the KP issue. You can give it a try. I’m using virtualsmc and this is for my Ryzen build so I don’t think that’ll work. so far only ThreadRipper is working not my puny Ryzen 5 3600 yet. Link to comment Share on other sites More sharing options...
Guest Posted October 17, 2020 Share Posted October 17, 2020 it is working also on 3950x but I think you have to find your proper way Now patches are working on and/clover we have to tune better some naming because they are different form clover and OpenCore Link to comment Share on other sites More sharing options...
jsl2000 Posted October 17, 2020 Share Posted October 17, 2020 24 minutes ago, SavageAUS said: I’m using virtualsmc and this is for my Ryzen build so I don’t think that’ll work. so far only ThreadRipper is working not my puny Ryzen 5 3600 yet. Is your config.plist for TR same as for Ryzen ? Can you share the working config.plist and its Clovex64.efi for TR with Clover ? I like to compare them with mine for Ryzen 1700X. Link to comment Share on other sites More sharing options...
Jief_Machak Posted October 17, 2020 Share Posted October 17, 2020 3 minutes ago, mifjpn said: My EFI right now doesn't have OpenRuntime.efi. OpenRuntime.efi only take care of WriteUnprotector quirk, I think... Not sure though. No harm to put it, so If you're not sure, start with it. 1 2 Link to comment Share on other sites More sharing options...
verleihnix Posted October 17, 2020 Share Posted October 17, 2020 4 hours ago, Slice said: I may propose you to install Fat.efi into CLOVER/drivers/UEFI. May be same driver from your BIOS is not good enough as I sometime encountered. Tried that, but it makes no difference. SSDT's are inserted, DSDT does not find its way into system. Neither in Catalina nor BS booted from Preboot AMI_X64_5125_(master,_commit_aee426fa3)_BootLog.txt Link to comment Share on other sites More sharing options...
iCanaro Posted October 17, 2020 Share Posted October 17, 2020 49 minutes ago, jsl2000 said: Thanks for your 2 config.plist, but unfortunately both are freeze during booting. Can you share your working BOOTX64.efi/CloverX64.efi for reference to debug ? starts with both clover 5125 master and last commit clover 5124 Link to comment Share on other sites More sharing options...
Jief_Machak Posted October 17, 2020 Share Posted October 17, 2020 I'm currently trying to improv and fix DSDT and log problems. I can't reproduce them here, that's why it's a bit difficult. 6 minutes ago, verleihnix said: Tried that, but it makes no difference. SSDT's are inserted, DSDT does not find its way into system. Neither in Catalina nor BS booted from Preboot AMI_X64_5125_(master,_commit_aee426fa3)_BootLog.txt Try this : CloverX64-2020-10-17-14-37-46-aee426f-dirty--jief.zip 15 hours ago, Mohamed Khairy said: hi I have some problems using last clover revision 5125 using usb flash memory to boot clover Mac OS Catalina boots but with no battery indicator no audio no touchpad here is my new clover floder CLOVER.zip here is clover boot log Reveal hidden contents 0:100 0:100 MemLog inited, TSC freq: 2593990616 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 CloverX64 : Image base = 0xB4DD7000 0:100 0:000 0:100 0:000 Now is 16.10.2020, 19:47:04 (GMT) 0:100 0:000 Starting Clover revision: 5125 (master, commit aee426fa3) on American Megatrends EFI 0:100 0:000 Build id: Clover build id: 20201016100620-aee426f-5125 0:100 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -D LESS_DEBUG -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED -D LESS_DEBUG --conf=/Users/sergey/src/CloverBootloader/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 0:100 0:000 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:101 0:001 SelfDirPath = \EFI\CLOVER 0:102 0:001 SimpleTextEx Status=Success 0:102 0:000 === [ GetDefaultSettings ] ====================== 0:102 0:000 === [ Get Smbios ] ============================== 0:102 0:000 Type 16 Index = 0 0:102 0:000 Total Memory Slots Count = 4 0:102 0:000 Type 17 Index = 0 0:102 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:102 0:000 SmbiosTable.Type17->Size = 4096MB 0:102 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 0:102 0:000 SmbiosTable.Type17->Vendor = Micron 0:102 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:102 0:000 SmbiosTable.Type17->PartNumber = 0:102 0:000 Type 17 Index = 1 0:102 0:000 Ignoring insane frequency value 0MHz 0:102 0:000 Type 17 Index = 2 0:102 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:102 0:000 SmbiosTable.Type17->Size = 4096MB 0:102 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 0:102 0:000 SmbiosTable.Type17->Vendor = Samsung 0:102 0:000 SmbiosTable.Type17->SerialNumber = 18122CB1 0:102 0:000 SmbiosTable.Type17->PartNumber = M471B5173DB0-YK0 0:102 0:000 Type 17 Index = 3 0:102 0:000 Ignoring insane frequency value 0MHz 0:102 0:000 Boot status=0 0:102 0:000 Running on: 'TP500LNG' with board 'TP500LNG' 0:102 0:000 === [ GetCPUProperties ] ======================== 0:102 0:000 CPU Vendor = 756E6547 Model=40651 0:102 0:000 The CPU supported SSE4.1 0:102 0:000 BrandString = Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz 0:102 0:000 The CPU supported turbo 0:102 0:000 MSR 0x35 20004 0:102 0:000 MSR 0xE2 before patch 1E008408 0:102 0:000 MSR 0xE2 is locked, PM patches will be turned on 0:102 0:000 MSR 0xCE 0008083D_F3011A00 0:102 0:000 corrected FLEX_RATIO = 0 0:102 0:000 MSR 0x1B0 00000000 0:102 0:000 FSBFrequency = 77 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 0:102 0:000 MaxDiv/MinDiv: 26.0/8 0:102 0:000 Turbo: 28/28/28/31 0:102 0:000 Features: 0x77DAFBBFBFEBFBFF 0:102 0:000 Threads: 4 0:102 0:000 Cores: 2 0:102 0:000 FSB: 100 MHz 0:102 0:000 CPU: 2000 MHz 0:102 0:000 TSC: 2000 MHz 0:102 0:000 PIS: 100 MHz 0:102 0:000 ExternalClock: 25 MHz 0:102 0:000 === [ GetDevices ] ============================== 0:102 0:000 GOP found at: PciRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) 0:102 0:000 PCI (00|00:00.00) : 8086 0A04 class=060000 0:102 0:000 PCI (00|00:02.00) : 8086 0A16 class=030000 0:102 0:000 - GOP: Provided by device 0:102 0:000 - GFX: Model=Intel HD Graphics 4400 (Intel) 0:102 0:000 PCI (00|00:03.00) : 8086 0A0C class=040300 0:102 0:000 PCI (00|00:14.00) : 8086 9C31 class=0C0330 0:102 0:000 PCI (00|00:16.00) : 8086 9C3A class=078000 0:102 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF 0:102 0:000 PCI (00|00:1B.00) : 8086 9C20 class=040300 0:102 0:000 PCI (00|00:1C.00) : 8086 9C10 class=060400 0:102 0:000 PCI (00|00:1C.02) : 8086 9C14 class=060400 0:102 0:000 PCI (00|02:00.00) : 10EC 5287 class=FF0000 0:102 0:000 PCI (00|02:00.01) : 10EC 8168 class=020000 0:102 0:000 - LAN: 0 Vendor=Realtek 0:102 0:000 PCI (00|00:1C.03) : 8086 9C16 class=060400 0:102 0:000 PCI (00|03:00.00) : 14E4 43A0 class=028000 0:102 0:000 - WIFI: Vendor= Broadcom 0:102 0:000 PCI (00|00:1C.04) : 8086 9C18 class=060400 0:102 0:000 PCI (00|04:00.00) : 10DE 1341 class=030200 0:102 0:000 PCI (00|00:1D.00) : 8086 9C26 class=0C0320 0:102 0:000 PCI (00|00:1F.00) : 8086 9C43 class=060100 0:102 0:000 PCI (00|00:1F.02) : 8086 9C03 class=010601 0:102 0:000 PCI (00|00:1F.03) : 8086 9C22 class=0C0500 0:102 0:000 PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF 0:102 0:000 Clover load options size = 4 bytes 0:106 0:003 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG--00-00-00-00-00-00'. Dir doesn't exist. 0:106 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG\UEFI'. Dir doesn't exist. 0:106 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG'. Dir doesn't exist. 0:106 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG-2000'. Dir doesn't exist. 0:106 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG'. Dir doesn't exist. 0:106 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\TP500LNG-2000'. Dir doesn't exist. 0:106 0:000 set OEMPath to "." 0:106 0:000 Oem dir = \EFI\CLOVER 0:106 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:109 0:003 Using config.plist at path: \EFI\CLOVER 0:109 0:000 \EFI\CLOVER\config.plist loaded: Success 0:109 0:000 === [ GetListOfThemes ] ========================= 0:112 0:002 - [00]: RANDOM 0:116 0:003 - [00]: EMBEDDED 0:119 0:003 - [00]: Glassy 0:123 0:003 === [ Found config plists ] ===================== 0:123 0:000 - config.plist 0:123 0:000 === [ GetEarlyUserSettings ] ==================== 0:123 0:000 timeout set to 5 0:123 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:123 0:000 get BlueValue=1.200000 0:123 0:000 Default theme: Glassy 0:123 0:000 Hiding entries with string Windows 0:123 0:000 Hiding entries with string HD3 0:123 0:000 Hiding entries with string Recovery 0:123 0:000 Hiding entries with string Preboot 0:123 0:000 Hiding entries with string HD1 0:123 0:000 Hiding entries with string HD4 0:123 0:000 === [ LoadDrivers ] ============================= 0:127 0:003 Loading FSInject.efi status=Success 0:130 0:003 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:131 0:001 SelfDirPath = \EFI\CLOVER 0:131 0:000 Oem dir = \EFI\CLOVER 0:131 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:131 0:000 Loading HFSPlus.efi status=Success 0:135 0:004 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:137 0:001 SelfDirPath = \EFI\CLOVER 0:137 0:000 Oem dir = \EFI\CLOVER 0:137 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:137 0:000 - driver needs connecting 0:137 0:000 Loading OsxFatBinaryDrv.efi status=Success 0:139 0:002 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:140 0:001 SelfDirPath = \EFI\CLOVER 0:140 0:000 Oem dir = \EFI\CLOVER 0:140 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:140 0:000 Loading CsmVideoDxe.efi status=Success 0:144 0:003 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:145 0:001 SelfDirPath = \EFI\CLOVER 0:145 0:000 Oem dir = \EFI\CLOVER 0:145 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:145 0:000 - driver needs connecting 0:145 0:000 Loading VirtualSmc.efi status=Success 0:249 0:103 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:250 0:001 SelfDirPath = \EFI\CLOVER 0:250 0:000 Oem dir = \EFI\CLOVER 0:250 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:250 0:000 Loading DataHubDxe.efi status=Success 0:258 0:008 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:259 0:001 SelfDirPath = \EFI\CLOVER 0:259 0:000 Oem dir = \EFI\CLOVER 0:259 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:259 0:000 Loading PartitionDxe.efi status=Success 0:263 0:004 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:264 0:001 SelfDirPath = \EFI\CLOVER 0:264 0:000 Oem dir = \EFI\CLOVER 0:264 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:264 0:000 - driver needs connecting 0:264 0:000 Loading ApfsDriverLoader.efi status=Success 0:267 0:002 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:268 0:001 SelfDirPath = \EFI\CLOVER 0:268 0:000 Oem dir = \EFI\CLOVER 0:268 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:268 0:000 - driver needs connecting 0:268 0:000 Loading AudioDxe.efi status=Success 0:273 0:005 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 0:274 0:001 SelfDirPath = \EFI\CLOVER 0:274 0:000 Oem dir = \EFI\CLOVER 0:274 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 0:274 0:000 - driver needs connecting 0:274 0:000 5 drivers needs connecting ... 0:274 0:000 PlatformDriverOverrideProtocol->GetDriver overriden 0:274 0:000 Partition driver loaded: 0:274 0:000 HFS+ driver loaded 0:274 0:000 Video driver loaded: disconnect Success 0:390 0:115 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:390 0:000 1 0:403 0:013 CsmVideoDriverBindingStart 0:403 0:000 mixed support=40010 0:403 0:000 Controller is [030000] 0:403 0:000 Check for VBE 0:409 0:006 found Detail Timing 1920x1080 0:409 0:000 timing string after 0xFE:AUO 0:409 0:000 timing string after 0xFE:B156HTN03.6 0:409 0:000 0 1280x1024 attr=9B - ok, edid- 0:409 0:000 1 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=1 0:410 0:000 2 640x480 attr=9B - ok, edid-, 640x480, working 0:410 0:000 3 800x600 attr=9B - ok, edid-, 800x600, working 0:410 0:000 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4 0:410 0:000 CsmVideo: New mode: 4 1920x1080 - set 0:622 0:212 - SetMode pref 4 (4) = Success 0:622 0:000 CsmVideoCheckForVbe - Success 0:622 0:000 CsmVideoDriverBindingStart end Success 0:622 0:000 CsmVideo: New mode: 3 800x600 - blocking that switch 0:623 0:000 CsmVideo: New mode: 1 1024x768 - blocking that switch 4:496 3:873 CsmVideoDriverBindingStart 4:496 0:000 Enable the device status=Unsupported 4:496 0:000 attributes Restored 4:496 0:000 CsmVideoDriverBindingStart end Unsupported 4:773 0:276 === [ InitScreen ] ============================== 4:773 0:000 Console modes reported: 3, available modes: 4:773 0:000 - [01]: 80x25 4:773 0:000 - [03]: 100x31 (current mode) 4:773 0:000 SetScreenResolution: 1920x1080 - already set 4:773 0:000 SetScreenResolution: 1920x1080 - already set 4:773 0:000 self.getSelfDevicePath()=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) @C77CD298 4:774 0:001 SelfDirPath = \EFI\CLOVER 4:774 0:000 Oem dir = \EFI\CLOVER 4:774 0:000 Kexts dir = '\EFI\CLOVER\Kexts' 4:776 0:002 === [ GetMacAddress ] =========================== 4:776 0:000 === [ ScanSPD ] ================================= 4:777 0:000 Scanning SMBus [8086:9C22], mmio: 0xF7C19004, ioport: 0xF040, hostc: 0x11 4:795 0:018 Slot: 2 Type 24 4096MB 1600MHz Vendor=Samsung PartNo=M471B5173DB0-YK0 SerialNo=18122CB1 4:796 0:000 === [ GetAcpiTablesList ] ======================= 4:796 0:000 Get Acpi Tables List from RSDT: 4:796 0:000 - [00]: FACP Notebook len=268 4:796 0:000 - [01]: APIC Notebook len=114 4:796 0:000 - [02]: FPDT Notebook len=68 4:796 0:000 - [03]: ECDT Notebook len=193 4:796 0:000 - [04]: LPIT len=148 4:796 0:000 - [05]: SSDT Cpu0Ist len=1337 4:796 0:000 - [06]: SSDT CpuPm len=2776 4:796 0:000 - [07]: MCFG Notebook len=60 4:796 0:000 - [08]: HPET Notebook len=56 4:796 0:000 - [09]: SSDT SataTabl len=727 4:796 0:000 - [10]: SSDT SaSsdt len=16161 4:796 0:000 - [11]: SSDT SgPch len=3533 4:796 0:000 - [12]: SSDT OptTabl len=6637 4:796 0:000 - [13]: MSDM Notebook len=85 4:796 0:000 Calibrated TSC Frequency = 2593990616 = 2593MHz 4:797 0:000 === [ GetUserSettings ] ========================= 4:797 0:000 Add 1 devices (kTagTypeDict): 4:797 0:000 USB FixOwnership: no 4:797 0:000 - final DSDT Fix mask=00000000 4:797 0:000 Using ProductName from config: MacBookPro11,2 4:797 0:000 Using latest BiosVersion from config 4:797 0:000 BiosVersion: MBP112.88Z.F000.B00.1907241257 4:797 0:000 BiosReleaseDate: 07/24/2019 4:797 0:000 Using EfiVersion from clover: 160.0.0.0.0 4:797 0:000 Using FirmwareFeatures from config: 0xE80FE137 4:797 0:000 Using FirmwareFeaturesMask from config: 0xFF1FFF3F 4:797 0:000 Board-ID set from config as Mac-3CBD00234E554E41 4:797 0:000 BoardType: 0xA 4:797 0:000 ChassisType: 0xA 4:797 0:000 Cannot find smbios.plist at path: '\EFI\CLOVER', trying '\EFI\CLOVER' 4:797 0:000 Cannot find smbios.plist at path: '\EFI\CLOVER' 4:801 0:003 === [ Found DSDT tables ] ======================= 4:803 0:002 - DSDT.AML 4:815 0:011 Added Kext=Other\Lilu.kext 4:821 0:006 Added Kext=Other\BT4LEContinuityFixup.kext 4:827 0:006 Added Kext=Other\AirportBrcmFixup.kext 4:881 0:053 Added Kext=Other\AppleALC.kext 4:887 0:006 Added Kext=Other\WhateverGreen.kext 4:894 0:006 Added Kext=Other\SMCBatteryManager.kext 4:901 0:006 Added Kext=Other\RealtekRTL8111.kext 4:908 0:006 Added Kext=Other\SMCProcessor.kext 4:941 0:033 Added Kext=Other\USBInjectAll.kext 4:948 0:006 Added Kext=Other\AsusSMC.kext 4:954 0:006 Added Kext=Other\Sinetek-rtsx.kext 4:969 0:014 Added Kext=Other\BrcmBluetoothInjector.kext 4:982 0:013 Added Kext=Other\ApplePS2SmartTouchPad.kext 5:006 0:024 Added Kext=Other\VirtualSMC.kext 5:019 0:012 === [ ScanVolumes ] ============================= 5:019 0:000 Found 15 volumes with blockIO 5:019 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0) 5:020 0:001 Result of bootcode detection: bootable unknown (legacy) 5:020 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50) 5:021 0:001 Result of bootcode detection: bootable unknown (legacy) 5:694 0:672 This is SelfVolume !! 5:694 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 5:699 0:005 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 5:701 0:001 Result of bootcode detection: bootable unknown (legacy) 5:701 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,DA737783-74DE-46C4-802A-37162A058CB9,0x28,0x64000) 5:702 0:000 Result of bootcode detection: bootable unknown (legacy) 5:702 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8) 5:703 0:000 Result of bootcode detection: bootable unknown (legacy) 5:703 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,ECEA0BC4-484C-439A-A3AF-71CD8784C1A3,0xBB1E000,0x8000) 5:703 0:000 hiding this volume 5:703 0:000 - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,A4B3851C-1F5E-46DE-8860-BA5ADE960803,0xBB26000,0xC83A000) 5:704 0:000 Result of bootcode detection: bootable Windows (vista,win) 5:704 0:000 hiding this volume 5:704 0:000 - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(5,GPT,2907E3B8-6D3F-4426-84E6-A30E7A3D3B53,0x18360000,0x3BC4000) 5:705 0:000 - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,MBR,0x404D1BB8,0x800,0x2CBA800) 5:705 0:000 Result of bootcode detection: bootable Windows (vista,win) 5:705 0:000 hiding this volume 5:705 0:000 - [10]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A) 5:706 0:001 hiding this volume 5:706 0:000 - [11]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,F7D9BCEB6E9FCA4AADA30BF461990721) 5:736 0:029 - [12]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E9D94F9073D4004FB6A568F3365C1C30) 5:736 0:000 hiding this volume 5:736 0:000 - [13]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,2E616AE739EE224EB8F807A752759174) 5:737 0:000 - [14]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,8835C31F73E7374DBACB41C3662555CA) 5:748 0:011 found 2 handles with audio 5:748 0:000 No AudioIoDevice stored 5:748 0:000 no stored audio parameters 5:748 0:000 Found Audio Device Realtek ALC233 (Speaker) at index 0 5:748 0:000 Found Audio Device Realtek ALC233 (Headphones) at index 1 5:748 0:000 === [ InitXTheme ] ============================== 5:748 0:000 use Daylight theme 5:751 0:002 Using theme 'Glassy' (Glassy) 5:751 0:000 chosen theme Glassy 5:751 0:000 OS main and drive as badge 5:909 0:157 sound play end with status=Device Error 5:912 0:003 theme inited 5:912 0:000 Chosen theme Glassy 5:912 0:000 after NVRAM boot-args= 5:912 0:000 === [ Dump SMC keys from NVRAM ] ================ 5:912 0:000 found AppleSMC protocol 5:916 0:004 === [ ScanLoader ] ============================== 5:916 0:000 - [01]: 'BOOT' 5:919 0:003 AddLoaderEntry for Volume Name=BOOT 5:920 0:000 IconName=unknown comma=-1 size=7 5:920 0:000 Full=unknown 5:920 0:000 Loader entry created for 'PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x1,0x0)\USB(0x1,0x0)\HD(1,MBR,0x0D9020DE,0x800,0xEE8F50)\EFI\BOOT\BOOTX64.efi' 5:920 0:000 - [04]: 'EFI' 5:920 0:000 AddLoaderEntry for Volume Name=EFI 5:920 0:000 IconName=vista,win comma=5 size=9 5:920 0:000 first=os_vista 5:920 0:000 Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,DA737783-74DE-46C4-802A-37162A058CB9,0x28,0x64000)\EFI\microsoft\Boot\bootmgfw.efi' 5:922 0:002 found entry ubuntu,linux 5:922 0:000 AddLoaderEntry for Volume Name=EFI 5:922 0:000 Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,DA737783-74DE-46C4-802A-37162A058CB9,0x28,0x64000)\EFI\UBUNTU\grubx64.efi' 5:923 0:000 - [10]: 'Preboot' 5:924 0:001 AddLoaderEntry for Volume Name=Preboot 5:924 0:000 Check if volume Is Hibernated: 5:924 0:000 Check sleep image 'by signature': 5:924 0:000 using default sleep image name = \private\var\vm\sleepimage 5:924 0:000 sleepimage not found -> Not Found 5:924 0:000 hibernated: no - sign 5:924 0:000 IconName=cata,mac comma=4 size=8 5:924 0:000 first=os_cata 5:925 0:000 Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A)\1FC33588-E773-4D37-BACB-41C3662555CA\System\Library\CoreServices\boot.efi' 5:925 0:000 - [11]: 'macOS - Data' 5:925 0:000 - [12]: 'Recovery' 5:926 0:000 AddLoaderEntry for Volume Name=Recovery 5:927 0:001 IconName=cata,mac comma=4 size=8 5:927 0:000 first=os_cata 5:927 0:000 Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E9D94F9073D4004FB6A568F3365C1C30)\1FC33588-E773-4D37-BACB-41C3662555CA\boot.efi' 5:928 0:000 - [13]: 'VM' 5:928 0:000 - [14]: 'macOS' 5:944 0:016 AddLoaderEntry for Volume Name=macOS 5:949 0:004 Check if volume Is Hibernated: 5:949 0:000 Check sleep image 'by signature': 5:949 0:000 using default sleep image name = \private\var\vm\sleepimage 5:949 0:000 sleepimage not found -> Not Found 5:949 0:000 hibernated: no - sign 5:949 0:000 IconName=cata,mac comma=4 size=8 5:949 0:000 first=os_cata 5:949 0:000 Loader entry created for 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,8835C31F73E7374DBACB41C3662555CA)\System\Library\CoreServices\boot.efi' 5:950 0:000 Scanning legacy ... 5:950 0:000 hidden 5:950 0:000 hidden 5:950 0:000 === [ AddCustomTool ] =========================== 5:954 0:004 === [ GetEfiBootDeviceFromNvram ] =============== 5:954 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A)\1FC33588-E773-4D37-BACB-41C3662555CA\System\Library\CoreServices\boot.efi 5:954 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A)' 5:954 0:000 - LoaderPath: '\1FC33588-E773-4D37-BACB-41C3662555CA\System\Library\CoreServices\boot.efi' 5:954 0:000 - Guid = B4807145-196D-48D5-9D82-D7B10C27F04D 5:954 0:000 === [ FindStartupDiskVolume ] =================== 5:954 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,98909875150FA7468AF3C3D711A9ED3A) 5:954 0:000 - searching for that partition and loader '\1FC33588-E773-4D37-BACB-41C3662555CA\System\Library\CoreServices\boot.efi' 5:954 0:000 - [!] not found 5:954 0:000 - searching again, but comparing Media dev path nodes 5:954 0:000 - found entry 2. 'Boot macOS from macOS', Volume 'macOS', '\System\Library\CoreServices\boot.efi' 5:954 0:000 Boot redirected to Entry 2. 'Boot macOS from macOS' 5:954 0:000 BannerPlace at Clear Screen [916,264] 6:230 0:276 AnimeRun=0 6:416 0:186 GUI ready 15:046 8:629 get MainChosenEntry FlagsBits = 0x7 15:046 0:000 boot with args: 20:327 5:280 get MainChosenEntry FlagsBits = 0x7 20:327 0:000 boot with args: 20:327 0:000 BootVariable of the entry is empty 20:327 0:000 === [ StartLoader ] ============================= 20:327 0:000 Finally: ExternalClock=25MHz BusSpeed=99769kHz CPUFreq=2594MHz PIS: hw.busfrequency=100000000Hz 20:327 0:000 Beginning OC 20:327 0:000 config-oc.plist isn't use at all 20:327 0:000 Bridge mmioWhiteList[0] to OC : comment=Haswell: SB_RCBA is a 0x4 page memory region, containing SPI_BASE at 0x3800 (SPI_BASE_ADDRESS) 20:327 0:000 Bridge mmioWhiteList[1] to OC : comment=Generic: PCI root is a 0x1000 page memory region used by some firmwares 20:327 0:000 UniOSVersion == 10.15.6 20:327 0:000 UniShortOSVersion == 10.15 20:327 0:000 AddKextsInArray from Other 20:327 0:000 ->Extra kext: Other\Lilu.kext (v.1.4.8) 20:327 0:000 ->Extra kext: Other\BT4LEContinuityFixup.kext (v.1.1.5) 20:327 0:000 ->Extra kext: Other\AirportBrcmFixup.kext (v.2.1.0) 20:327 0:000 |-- PlugIn kext: Other\AirportBrcmFixup.kext\Contents\PlugIns\AirPortBrcm4360_Injector.kext (v.1.0) 20:327 0:000 |-- PlugIn kext: Other\AirportBrcmFixup.kext\Contents\PlugIns\AirPortBrcmNIC_Injector.kext (v.1.0) 20:327 0:000 ->Extra kext: Other\AppleALC.kext (v.1.5.3) 20:327 0:000 ->Extra kext: Other\WhateverGreen.kext (v.1.4.3) 20:327 0:000 ->Extra kext: Other\SMCBatteryManager.kext (v.1.1.7) 20:327 0:000 ->Extra kext: Other\RealtekRTL8111.kext (v.2.3.0) 20:327 0:000 ->Extra kext: Other\SMCProcessor.kext (v.1.1.7) 20:327 0:000 ->Extra kext: Other\USBInjectAll.kext (v.0.7.5) 20:327 0:000 ->Extra kext: Other\AsusSMC.kext (v.1.4.1) 20:327 0:000 ->Extra kext: Other\Sinetek-rtsx.kext (v.7) 20:327 0:000 ->Extra kext: Other\BrcmBluetoothInjector.kext (v.2.5.5) 20:327 0:000 ->Extra kext: Other\ApplePS2SmartTouchPad.kext (v.4.6.8) 20:327 0:000 |-- PlugIn kext: Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Keyboard.kext (v.4.6.8) 20:327 0:000 |-- PlugIn kext: Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Controller.kext (v.4.6.8) 20:327 0:000 ->Extra kext: Other\VirtualSMC.kext (v.1.1.7) 20:327 0:000 AddKextsInArray from Off 20:327 0:000 AddKextsInArray from 10 20:327 0:000 AddKextsInArray from 10_normal 20:327 0:000 AddKextsInArray from 10.15 20:327 0:000 AddKextsInArray from 10.15_normal 20:327 0:000 AddKextsInArray from 10.15.6 20:327 0:000 AddKextsInArray from 10.15.6_normal 20:327 0:000 Bridge kext to OC : Path=Lilu.kext 20:327 0:000 info plist path: .\Kexts\Other\Lilu.kext\Contents\Info.plist 20:331 0:003 assign executable as 'Contents\MacOS\Lilu' 20:331 0:000 Bridge kext to OC : Path=VirtualSMC.kext 20:331 0:000 info plist path: .\Kexts\Other\VirtualSMC.kext\Contents\Info.plist 20:340 0:008 assign executable as 'Contents\MacOS\VirtualSMC' 20:340 0:000 Bridge kext to OC : Path=WhateverGreen.kext 20:340 0:000 info plist path: .\Kexts\Other\WhateverGreen.kext\Contents\Info.plist 20:344 0:004 assign executable as 'Contents\MacOS\WhateverGreen' 20:344 0:000 Bridge kext to OC : Path=AppleALC.kext 20:344 0:000 info plist path: .\Kexts\Other\AppleALC.kext\Contents\Info.plist 20:388 0:044 assign executable as 'Contents\MacOS\AppleALC' 20:388 0:000 Bridge kext to OC : Path=SMCProcessor.kext 20:388 0:000 info plist path: .\Kexts\Other\SMCProcessor.kext\Contents\Info.plist 20:392 0:004 assign executable as 'Contents\MacOS\SMCProcessor' 20:392 0:000 Bridge kext to OC : Path=BT4LEContinuityFixup.kext 20:392 0:000 info plist path: .\Kexts\Other\BT4LEContinuityFixup.kext\Contents\Info.plist 20:396 0:003 assign executable as 'Contents\MacOS\BT4LEContinuityFixup' 20:396 0:000 Bridge kext to OC : Path=AirportBrcmFixup.kext 20:396 0:000 info plist path: .\Kexts\Other\AirportBrcmFixup.kext\Contents\Info.plist 20:400 0:004 assign executable as 'Contents\MacOS\AirportBrcmFixup' 20:400 0:000 Bridge kext to OC : Path=AirPortBrcm4360_Injector.kext 20:400 0:000 info plist path: .\Kexts\Other\AirportBrcmFixup.kext\Contents\PlugIns\AirPortBrcm4360_Injector.kext\Contents\Info.plist 20:401 0:001 Bridge kext to OC : Path=AirPortBrcmNIC_Injector.kext 20:401 0:000 info plist path: .\Kexts\Other\AirportBrcmFixup.kext\Contents\PlugIns\AirPortBrcmNIC_Injector.kext\Contents\Info.plist 20:402 0:001 Bridge kext to OC : Path=SMCBatteryManager.kext 20:402 0:000 info plist path: .\Kexts\Other\SMCBatteryManager.kext\Contents\Info.plist 20:406 0:003 assign executable as 'Contents\MacOS\SMCBatteryManager' 20:406 0:000 Bridge kext to OC : Path=RealtekRTL8111.kext 20:406 0:000 info plist path: .\Kexts\Other\RealtekRTL8111.kext\Contents\Info.plist 20:410 0:003 assign executable as 'Contents\MacOS\RealtekRTL8111' 20:410 0:000 Bridge kext to OC : Path=USBInjectAll.kext 20:410 0:000 info plist path: .\Kexts\Other\USBInjectAll.kext\Contents\Info.plist 20:431 0:021 assign executable as 'Contents\MacOS\USBInjectAll' 20:431 0:000 Bridge kext to OC : Path=AsusSMC.kext 20:431 0:000 info plist path: .\Kexts\Other\AsusSMC.kext\Contents\Info.plist 20:435 0:004 assign executable as 'Contents\MacOS\AsusSMC' 20:435 0:000 Bridge kext to OC : Path=Sinetek-rtsx.kext 20:435 0:000 info plist path: .\Kexts\Other\Sinetek-rtsx.kext\Contents\Info.plist 20:439 0:003 assign executable as 'Contents\MacOS\Sinetek-rtsx' 20:439 0:000 Bridge kext to OC : Path=BrcmBluetoothInjector.kext 20:439 0:000 info plist path: .\Kexts\Other\BrcmBluetoothInjector.kext\Contents\Info.plist 20:444 0:004 Bridge kext to OC : Path=ApplePS2SmartTouchPad.kext 20:444 0:000 info plist path: .\Kexts\Other\ApplePS2SmartTouchPad.kext\Contents\Info.plist 20:451 0:007 assign executable as 'Contents\MacOS\ApplePS2SmartTouchPad' 20:451 0:000 Bridge kext to OC : Path=ApplePS2Keyboard.kext 20:451 0:000 info plist path: .\Kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Keyboard.kext\Contents\Info.plist 20:456 0:004 assign executable as 'Contents\MacOS\ApplePS2Keyboard' 20:456 0:000 Bridge kext to OC : Path=ApplePS2Controller.kext 20:456 0:000 info plist path: .\Kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Controller.kext\Contents\Info.plist 20:459 0:003 assign executable as 'Contents\MacOS\ApplePS2Controller' 20:460 0:001 OCST: Missing vault data, ignoring... 20:463 0:002 Load OpenRuntime.efi : Status Success 20:463 0:000 Start OpenRuntime.efi : Status Success 20:463 0:000 OC: OcMiscEarlyInit... 20:463 0:000 OC: Watchdog status is 1 20:463 0:000 OC: OpenCore DBG-061-2020-10-16 is loading in Optional mode (0/0)... 20:463 0:000 OC: Boot timestamp - 2020.10.16 19:47:25 20:463 0:000 OCCPU: MP services threads 4 (enabled 4) - Success 20:463 0:000 OCCPU: MP services Pkg 1 Cores 2 Threads 2 - Success 20:463 0:000 OCCPU: Found Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz 20:463 0:000 OCCPU: Signature 40651 Stepping 1 Model 45 Family 6 Type 0 ExtModel 4 ExtFamily 0 uCode 1C 20:463 0:000 OCCPU: EIST CFG Lock 1 20:463 0:000 OCCPU: Discovered CpuFamily 6 CpuModel 69 CpuStepping 1 CpuGeneration 6 20:463 0:000 OCCPU: Ratio Min 8 Max 26 Current 25 Turbo 31 28 28 28 20:564 0:100 TscFrequency 2593994023 20:564 0:000 OCCPU: Detected Apple Processor Type: 07 -> 0705 20:564 0:000 OCCPU: CPUFrequencyFromTSC 2593994023Hz 2593MHz 20:564 0:000 OCCPU: CPUFrequency 2593994023Hz 2593MHz 20:564 0:000 OCCPU: FSBFrequency 99769000Hz 99MHz 20:564 0:000 OCCPU: Pkg 1 Cores 2 Threads 4 20:564 0:000 OC: OcLoadNvramSupport... 20:564 0:000 OC: Current version is DBG-061-2020-10-16 20:564 0:000 OC: OcMiscMiddleInit... 20:564 0:000 OC: LoadHandle 0 with BootProtect in mode - Unsupported 20:564 0:000 OC: OcLoadUefiSupport... 20:564 0:000 OcAppleEventInstallProtocol 20:564 0:000 InternalCreateQueueEvent 20:564 0:000 EventCreateSimplePointerInstallNotifyEvent 20:564 0:000 InternalSimplePointerInstallNotifyFunction 20:564 0:000 InternalRegisterSimplePointerInterface 20:564 0:000 InternalRegisterSimplePointerInterface 20:564 0:000 InternalRegisterSimplePointerInterface 20:564 0:000 OcOSInfoInstallProtocol 20:564 0:000 OCRTC: OcAppleRtcRamInstallProtocol 20:564 0:000 OCRTC: Wake log is 0x00 0x00 0 0x00 20:564 0:000 OcAppleFbInfoInstallProtocol 20:564 0:000 OC: Loading Apple Secure Boot with Disabled (level 0) 20:565 0:000 OCABC: RTDFRG 1 DEVMMIO 0 NOSU 0 NOVRWR 0 NOSB 0 NOHBMAP 0 SMSLIDE 1 WRUNPROT 1 20:565 0:000 OCABC: FEXITBS 0 PRMRG 0 CSLIDE 0 MSLIDE 0 PRSRV 0 RBMAP 0 VMAP 1 APPLOS 0 RTPERMS 1 20:565 0:000 OCABC: Got rendezvous with OpenRuntime r11 20:565 0:000 OCABC: MAT support is 0 20:565 0:000 OC: RBVR 0 DDBR 0 20:565 0:000 OC: Got 0 drivers 20:565 0:000 OCC: Installing GOP (Unsupported) on ConsoleOutHandle... 20:565 0:000 OC: Requested resolution is 1920x1080@0 (max: 0) from 1920x1080 20:565 0:000 OCC: Requesting 1920x1080@0 (max: 0) resolution, curr 4, total 5 20:566 0:000 OCC: Mode 0 - 1280x1024:1 20:566 0:000 OCC: Mode 1 - 1024x768:1 20:566 0:000 OCC: Mode 2 - 640x480:1 20:566 0:000 OCC: Mode 3 - 800x600:1 20:566 0:000 OCC: Mode 4 - 1920x1080:1 20:566 0:000 OCC: Current mode matches desired mode 4 20:566 0:000 OC: Changed resolution to 1920x1080@0 (max: 0) from 1920x1080 - Already started 20:566 0:000 OCC: Using builtin text renderer with 1 scale 20:725 0:158 OCC: Install console control (B4F12DF0/0/0), current - Success 20:725 0:000 OCC: Setup ASCII Output - Success 20:725 0:000 OC: Requested console mode is 0x0 (max: 0) from 20:725 0:000 OC: Requested not to use audio 20:725 0:000 OC: OcLoadPlatformSupport... 20:725 0:000 OC: OcLoadDevPropsSupport... 20:725 0:000 OC: OcMiscLateInit... 20:725 0:000 OC: Invalid HibernateMode: 20:725 0:000 OC: Translated HibernateMode to 0 20:725 0:000 OC: Hibernation detection status is Not Found 20:725 0:000 OC: OcLoadKernelSupport... 20:725 0:000 OC: All green, starting boot management... 20:725 0:000 DevicePath = PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(2,GPT,B4807145-196D-48D5-9D82-D7B10C27F04D,0x64028,0xBAB9FD8)/VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,8835C31F73E7374DBACB41C3662555CA)/\System\Library\CoreServices\boot.efi 20:732 0:007 OCB: Arch filtering BBC69018(621112)->BBC69018(621112) caps 4 - Success 20:891 0:159 GetOSVersion: 10.15.6 (19G73) 20:891 0:000 Will not patch boot.efi 20:891 0:000 === [ PatchSmbios ] ============================= 20:891 0:000 insert table 9 for dev 0:1 20:891 0:000 insert table 9 for dev 0:0 20:891 0:000 Table 11 present, but rewritten for us 20:892 0:000 Trusting SMBIOS... 20:892 0:000 Channels: 1 20:892 0:000 Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 20:892 0:000 trusted SMBIOS data: 20:892 0:000 SmbiosTable.Type17->Vendor = Micron 20:892 0:000 SmbiosTable.Type17->SerialNumber = 00000000 20:892 0:000 SmbiosTable.Type17->PartNumber = 20:892 0:000 partNum unknown 20:892 0:000 Type17->Manufacturer corrected by SMBIOS from NoName to Micron 20:892 0:000 SMBIOS Type 17 Index = 0 => 0 0: 20:892 0:000 BANK 0 DIMM0 1600MHz 4096MB(Ext:0MB) 20:892 0:000 SMBIOS Type 17 Index = 1 => 1 1: 20:892 0:000 BANK 0 DIMM1 EMPTY 20:892 0:000 trusted SMBIOS data: 20:892 0:000 SmbiosTable.Type17->Vendor = Samsung 20:892 0:000 SmbiosTable.Type17->SerialNumber = 18122CB1 20:892 0:000 SmbiosTable.Type17->PartNumber = M471B5173DB0-YK0 20:892 0:000 partNum=M471B5173DB0-YK0 20:892 0:000 SPD data in use: 20:892 0:000 SmbiosTable.Type17->Vendor = Samsung 20:892 0:000 SmbiosTable.Type17->SerialNumber = 18122CB1 20:892 0:000 SmbiosTable.Type17->PartNumber = M471B5173DB0-YK0 20:892 0:000 SMBIOS Type 17 Index = 2 => 2 2: 20:892 0:000 BANK 0 DIMM2 1600MHz 4096MB(Ext:0MB) 20:892 0:000 mTotalSystemMemory = 8192 20:892 0:000 NumberOfMemoryDevices = 3 20:892 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 1000 20:892 0:000 Type20[1]->End = 0x7FFFFF, Type17[2] = 3000 20:892 0:000 Table 131 is present, CPUType=31 20:892 0:000 Change to: 705 20:892 0:000 === [ PatchACPI ] =============================== 20:892 0:000 Xsdt reallocation done 20:892 0:000 old FADT length=10C 20:892 0:000 SignatureFixup: 0xB9 -> 0x0 20:892 0:000 DSDT found in Clover volume OEM folder: \EFI\CLOVER\ACPI\patched\\DSDT.aml 20:892 0:000 DSDT found in Clover volume: \EFI\CLOVER\ACPI\patched\\DSDT.aml 20:892 0:000 Apply DsdtFixMask=0x00000000 20:892 0:000 === [ FixBiosDsdt ] ============================= 20:893 0:000 PreCleanup XSDT: count=14, length=148 20:893 0:000 PreCleanup XSDT, corrected XSDT: count=14, length=148 20:893 0:000 === [ ACPIDropTables ] ========================== 20:893 0:000 === [ DropSSDT ] ================================ 20:893 0:000 Drop tables from XSDT, SIGN=SSDT TableID= Length=0 20:893 0:000 Table[5]: SSDT Cpu0Ist 1337 dropped 20:893 0:000 Table[6]: SSDT CpuPm 2776 dropped 20:893 0:000 Table[9]: SSDT SataTabl 727 dropped 20:893 0:000 Table[10]: SSDT SaSsdt 16161 dropped 20:893 0:000 Table[11]: SSDT SgPch 3533 dropped 20:893 0:000 Table[12]: SSDT OptTabl 6637 dropped 20:893 0:000 === [ ACPIPatchedAML ] ========================== 20:893 0:000 Sorted 20:893 0:000 Inserting table[0]:DSDT.aml from \EFI\CLOVER\ACPI\patched: size=94458 ... Success 20:901 0:008 Inserting table[1]:SSDT-0.aml from \EFI\CLOVER\ACPI\patched: size=638 ... Success 20:902 0:001 Inserting table[2]:SSDT-1.aml from \EFI\CLOVER\ACPI\patched: size=1847 ... Success 20:903 0:001 Inserting table[3]:SSDT-5.aml from \EFI\CLOVER\ACPI\patched: size=747 ... Success 20:904 0:001 Inserting table[4]:SSDT-6.aml from \EFI\CLOVER\ACPI\patched: size=16647 ... Success 20:907 0:002 Inserting table[5]:SSDT-7.aml from \EFI\CLOVER\ACPI\patched: size=4824 ... Success 20:908 0:001 Inserting table[6]:SSDT-8.aml from \EFI\CLOVER\ACPI\patched: size=5067 ... Success 20:909 0:001 Inserting table[7]:SSDT-EC.aml from \EFI\CLOVER\ACPI\patched: size=91 ... Success 20:910 0:000 Inserting table[8]:SSDT-PNLF.aml from \EFI\CLOVER\ACPI\patched: size=787 ... Success 20:911 0:001 Inserting table[9]:SSDT-UIAC.aml from \EFI\CLOVER\ACPI\patched: size=342 ... Success 20:912 0:000 ApicCPUNum=4 20:912 0:000 Cleanup XSDT: count=24, length=228 20:912 0:000 corrected XSDT count=18, length=180 20:912 0:000 === [ RestSetup macOS ] ========================= 20:912 0:000 EdidDiscovered size=128 20:912 0:000 --- Discovered EDID Table size:128 20:912 0:000 000 | 00 FF FF FF FF FF FF 00 06 AF 20:912 0:000 010 | ED 36 00 00 00 00 00 17 01 04 20:912 0:000 020 | 95 22 13 78 02 D1 15 9E 59 53 20:912 0:000 030 | 9B 27 1E 50 54 00 00 00 01 01 20:912 0:000 040 | 01 01 01 01 01 01 01 01 01 01 20:912 0:000 050 | 01 01 01 01 78 37 80 B4 70 38 20:912 0:000 060 | 2E 40 6C 30 AA 00 58 C1 10 00 20:912 0:000 070 | 00 18 00 00 00 0F 00 00 00 00 20:912 0:000 080 | 00 00 00 00 00 00 00 00 00 20 20:912 0:000 090 | 00 00 00 FE 00 41 55 4F 0A 20 20:912 0:000 100 | 20 20 20 20 20 20 20 20 00 00 20:912 0:000 110 | 00 FE 00 42 31 35 36 48 54 4E 20:912 0:000 120 | 30 33 2E 36 20 0A 00 97 20:912 0:000 add device: PciRoot(0x0)/Pci(0x2,0x0) 20:912 0:000 Add key=framebuffer-patch1-replace valuelen=48 20:912 0:000 Add key=framebuffer-patch1-find valuelen=48 20:912 0:000 Add key=framebuffer-patch1-enable valuelen=4 20:912 0:000 Add key=framebuffer-patch0-replace valuelen=20 20:912 0:000 Add key=framebuffer-patch0-find valuelen=20 20:912 0:000 Add key=framebuffer-patch0-enable valuelen=4 20:912 0:000 Add key=device-id valuelen=4 20:912 0:000 Add key=AAPL00,override-no-edid valuelen=128 20:912 0:000 Add key=AAPL,ig-platform-id valuelen=4 20:912 0:000 Intel GFX injection not set 20:912 0:000 stringlength = 1746 20:912 0:000 CurrentMode: Width=1920 Height=1080 20:916 0:003 Use origin smbios table type 1 guid. 20:917 0:000 Custom boot is disabled all works fine with clover rev 5119 when trying to boot new clover revision from ssd efi folder clover can't start ! as on picture cloverdirpathasxstringw.endwith(\) can't solve this problem any help thanks on advance Could you try the EFI file form the previous post ? It won't fix the problem this time, but will give me some more information. Take a picture like you did of the message. 1 1 Link to comment Share on other sites More sharing options...
SavageAUS Posted October 17, 2020 Share Posted October 17, 2020 37 minutes ago, jsl2000 said: Is your config.plist for TR same as for Ryzen ? Can you share the working config.plist and its Clovex64.efi for TR with Clover ? I like to compare them with mine for Ryzen 1700X. I have no TR just Ryzen 5 which I am unable to boot with Clover yet. Link to comment Share on other sites More sharing options...
verleihnix Posted October 17, 2020 Share Posted October 17, 2020 25 minutes ago, Jief_Machak said: I'm currently trying to improv and fix DSDT and log problems. I can't reproduce them here, that's why it's a bit difficult. Try this : CloverX64-2020-10-17-14-37-46-aee426f-dirty--jief.zip DSDT is still not in system AMI_X64_5125_(master,_commit_aee426fa3)_BootLog.txt Link to comment Share on other sites More sharing options...
Jief_Machak Posted October 17, 2020 Share Posted October 17, 2020 1 minute ago, verleihnix said: DSDT is still not in system AMI_X64_5125_(master,_commit_aee426fa3)_BootLog.txt You didn't boot on my efi file. Before posting, check the beginning of the debug.log. Here is the build id "Build id: Clover build id: 20201016100620-aee426f-5125", which is not the one I've sent. Most likely a problem of "where should I copy that efi file ?" If you EFI boot, not legacy, my personal answer would be, of course, put this BootX64.efi file (https://github.com/jief666/BootloaderChooser/releases/tag/0.3) in EFI/BOOT and then put the clover efi file I've posted in your clover folder. No need to rename it CloverX64.efi. Just chose it at the menu. Next time, boot with a key pressed, or change timeout to get the BootloaderChooser text menu. 1 1 Link to comment Share on other sites More sharing options...
Slice Posted October 17, 2020 Share Posted October 17, 2020 6 minutes ago, verleihnix said: DSDT is still not in system AMI_X64_5125_(master,_commit_aee426fa3)_BootLog.txt How do you know this? 5:819 0:000 === [ Found DSDT tables ] ======================= 5:822 0:003 - DSDT.AML 10:421 0:003 DSDT found in Clover volume: \EFI\CLOVER\ACPI\patched\\DSDT.aml 10:421 0:000 Apply DsdtFixMask=0x506600D4 2 Link to comment Share on other sites More sharing options...
Matgen84 Posted October 17, 2020 Share Posted October 17, 2020 (edited) 40 minutes ago, Jief_Machak said: I'm currently trying to improv and fix DSDT and log problems. I can't reproduce them here, that's why it's a bit difficult. Try this : CloverX64-2020-10-17-14-37-46-aee426f-dirty--jief.zip @Jief_Machak I can't boot Mojave with this commit on my IvyBridge system. Spoiler Edited October 17, 2020 by Matgen84 Link to comment Share on other sites More sharing options...
Jief_Machak Posted October 17, 2020 Share Posted October 17, 2020 CloverX64-2020-10-17-15-19-13-aee426f-dirty--jief.zip 2 Link to comment Share on other sites More sharing options...
jsl2000 Posted October 17, 2020 Share Posted October 17, 2020 13 minutes ago, SavageAUS said: I have no TR just Ryzen 5 which I am unable to boot with Clover yet. Up to now only two persons can boot Big Sur by Clover in T-Ryzen and only one succeed in Ryzen 3950X. All are newer AMD CPUs than Ryzen 1700X and FX-6300 of mine. So need waiting for Jief_Machak to fix Clover bootloader. Link to comment Share on other sites More sharing options...
kushwavez Posted October 17, 2020 Share Posted October 17, 2020 (edited) Installer USB's aren't working on Clover v5125 for me. (Notebook 1) The process always hangs at IOAHCIBlockStorage because my ICH 100 series chipset needs "CtlnaAHCIPort.kext" in order to use SATA drives. Tested trice, results: Big Sur Beta 10 Installer USB - Clover v5125: Hangs at IOAHCIBlockStorage, can't boot. However installed system is fine. Catalina 10.15.7 Installer USB - Clover v5125: Stalling, but after a while proceeds to the Install screen, However my trackpad and keyboard aren't working, my drives aren't showing up in Disk Util. Installed system boots fine. According to the debug.log the kexts (ApplePS2SmartTouchpad.kext, CtlnaAHCIPort.kext) are successfully loaded, but they're not working on v5125. Then I replaced v5125 CLOVERX64.efi with v5124, results: Big Sur Beta 10 Installer USB - Clover v5124: Will test in 30 minutes. Tested, working. Installing now. Catalina 10.15.7 Installer USB - Clover v5124: Booted the installer fine, drives are okay, trackpad ok, system ok. debug.log Edited October 17, 2020 by kushwavez Tested Beta 10 USB installer w/ v5124 2 Link to comment Share on other sites More sharing options...
SavageAUS Posted October 17, 2020 Share Posted October 17, 2020 11 minutes ago, jsl2000 said: Up to now only two persons can boot Big Sur by Clover in T-Ryzen and only one succeed in Ryzen 3950X. All are newer AMD CPUs than Ryzen 1700X and FX-6300 of mine. So need waiting for Jief_Machak to fix Clover bootloader. Mines a Ryzen 5 3600 so now new but not old either and I can’t boot yet. I’ll tinker when I get a chance but I have requested at the amd-osx github be updated for clover patches now that we have proof of concept. 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted October 17, 2020 Share Posted October 17, 2020 10 minutes ago, Jief_Machak said: CloverX64-2020-10-17-15-19-13-aee426f-dirty--jief.zip @Jief_Machak Thanks. I can boot my IvyBridge(Mojave) system (don't try on my Z390 Big Sur). DSDT Patch is detected correctly: 5:589 0:013 === [ Found DSDT tables ] ======================= 5:601 0:012 - DSDT.AML 30:957 0:009 DSDT found in Clover volume: \EFI\CLOVER\ACPI\patched\DSDT.aml 30:970 0:013 Apply DsdtFixMask=0x50400000 1 Link to comment Share on other sites More sharing options...
naiclub Posted October 17, 2020 Share Posted October 17, 2020 54 minutes ago, Slice said: How do you know this? 5:819 0:000 === [ Found DSDT tables ] ======================= 5:822 0:003 - DSDT.AML 10:421 0:003 DSDT found in Clover volume: \EFI\CLOVER\ACPI\patched\\DSDT.aml 10:421 0:000 Apply DsdtFixMask=0x506600D4 In this case, if 1 line is missing from the left That shows Clover can now load the modified DSDT.aml. But I tried version 5124-5125. Not change in the slightest Give an example=\EFI\CLOVER\ACPI\patched*\*DSDT.aml Link to comment Share on other sites More sharing options...
Slice Posted October 17, 2020 Share Posted October 17, 2020 10 minutes ago, naiclub said: In this case, if 1 line is missing from the left That shows Clover can now load the modified DSDT.aml. But I tried version 5124-5125. Not change in the slightest Give an example=\EFI\CLOVER\ACPI\patched*\*DSDT.aml ? I understand nothing. I always see DSDT.aml is loading. 1 Link to comment Share on other sites More sharing options...
naiclub Posted October 17, 2020 Share Posted October 17, 2020 33 minutes ago, Slice said: ? I understand nothing. I always see DSDT.aml is loading. Yes, it only loads the original. That has not been resolved If it loads the modified version I will be able to use everything. I do not know how to describe it, you understand. I am not a developer. Link to comment Share on other sites More sharing options...
Slice Posted October 17, 2020 Share Posted October 17, 2020 7 minutes ago, naiclub said: Yes, it only loads the original. That has not been resolved If it loads the modified version I will be able to use everything. I do not know how to describe it, you understand. I am not a developer. Make a screenshot of EFI/CLOVER/ACPI/patched/ folder. 1 Link to comment Share on other sites More sharing options...
Slice Posted October 17, 2020 Share Posted October 17, 2020 Do with me Spoiler log 101:278 0:081 DSDT found in Clover volume OEM folder: \EFI\CLOVER\ACPI\patched\\DSDT-4.aml 101:416 0:138 Output DSDT before patch to \EFI\CLOVER\ACPI\origin\DSDT-or.aml 101:924 0:507 Apply DsdtFixMask=0x179521DD And then I compare this special DSDT with that is loaded into system. 1 1 Link to comment Share on other sites More sharing options...
verleihnix Posted October 17, 2020 Share Posted October 17, 2020 2 hours ago, Slice said: How do you know this? iMac: kextstat |grep LPC 88 0 0xffffff7f8576b000 0x11000 0x11000 org.hwsensors.driver.LPCSensors (1800) EF5BB9DC-C33F-3EED-9F96-42A7F22D806F <46 13 12 8 6 5 3> AppleLPC.kext does not show up And all other fixes in DSDT doesn't as well. Link to comment Share on other sites More sharing options...
Guest Posted October 17, 2020 Share Posted October 17, 2020 (edited) 3 hours ago, jsl2000 said: Up to now only two persons can boot Big Sur by Clover in T-Ryzen and only one succeed in Ryzen 3950X. All are newer AMD CPUs than Ryzen 1700X and FX-6300 of mine. So need waiting for Jief_Machak to fix Clover bootloader. I think the first step should be to standardize the patches or how they are used in clover compared to opencore, since now part of the heart of Opencore is used to boot in OSX For example the words Disabled / Enabled, MaskFind and replace..and so on Also min and max kernel it would be interesting to have it the same and by the way: this Up to now only two persons can boot Big Sur by Clover in T-Ryzen and only one succeed in Ryzen 3950X. could be also read as only two users can't boot in big Sur or have not succeed to boot with it, because from what I am reading here no many AMD users are interested to boot with Clover boot loader (and I do not understand why people is not happy to have more choices..) Edited October 17, 2020 by Guest Link to comment Share on other sites More sharing options...
jsl2000 Posted October 17, 2020 Share Posted October 17, 2020 12 minutes ago, fabiosun said: I think the first step should be to standardize the patches or how they are used in clover compared to opencore, since now part of the heart of Opencore is used to boot in OSX For example the words Disabled / Enabled, MaskFind and replace..and so on Also min and max kernel it would be interesting to have it the same and by the way: this Up to now only two persons can boot Big Sur by Clover in T-Ryzen and only one succeed in Ryzen 3950X. could be also read as only two users can't boot in big Sur or have not succeed to boot with it, because from what I am reading here no many AMD users are interested to boot with Clover boot loader (and I do not understand why people is not happy to have more choices..) According to my observation only you and iCanaro can boot Big Sur with Clover. The others like me, SavageAUS, etc. are so eagerly waiting for a solution all day long ! Link to comment Share on other sites More sharing options...
Recommended Posts