Clover General discussion

Slice · October 12, 2020

For Mojave yes. But AFAIK AptioMemoryFix is not compatible with BigSur.

Matgen84 · October 12, 2020

1 minute ago, Slice said:

For Mojave yes. But AFAIK AptioMemoryFix is not compatible with BigSur.

@Slice I want to leave my IvyBridge with Mojave (or update it to Catalina), but I don't want to install Big Sur on it. If I understand correctly what you are telling me: I can leave my current config.plist (old version) and update normally.

That's right. Tell me.

Slice · October 12, 2020

I see no problem. May be I poor see.

kushwavez · October 12, 2020

I can't boot Catalina 10.15.7 with v5124. Should I change anything inside config.plist's Quirk section for this update? I see it's changed in config-sample, but can't boot with that either.

Now it's looks like this:

Spoiler


<key>Quirks</key>
	<dict>
		<key>DisableLinkeditJettison</key>
		<true/>
		<key>PanicNoKextDump</key>
		<true/>
		<key>LapicKernelPanic</key>
		<false/>
		<key>ThirdPartyDrives</key>
		<false/>
		<key>SyncRuntimePermissions</key>
		<true/>
		<key>XhciPortLimit</key>
		<true/>
		<key>EnableWriteUnprotector</key>
		<true/>
		<key>PowerTimeoutKernelPanic</key>
		<true/>
		<key>DummyPowerManagement</key>
		<false/>
		<key>ProvideMaxSlide</key>
		<integer>0</integer>
		<key>ProvideCustomSlide</key>
		<false/>
		<key>EnableSafeModeSlide</key>
		<true/>
		<key>ForceExitBootServices</key>
		<false/>
		<key>ProtectSecureBoot</key>
		<false/>
		<key>DisableVariableWrite</key>
		<false/>
		<key>AppleXcpmCfgLock</key>
		<true/>
		<key>DisableIoMapper</key>
		<true/>
		<key>AvoidRuntimeDefrag</key>
		<true/>
		<key>MmioWhitelist</key>
		<array>
			<dict>
				<key>Address</key>
				<integer>4275159040</integer>
				<key>Comment</key>
				<string>Haswell: SB_RCBA is a 0x4 page memory region, containing SPI_BASE at 0x3800 (SPI_BASE_ADDRESS)</string>
				<key>Enabled</key>
				<false/>
			</dict>
			<dict>
				<key>Address</key>
				<integer>4278190080</integer>
				<key>Comment</key>
				<string>Generic: PCI root is a 0x1000 page memory region used by some firmwares</string>
				<key>Enabled</key>
				<false/>
			</dict>
		</array>
		<key>DisableRtcChecksum</key>
		<false/>
		<key>ProtectMemoryRegions</key>
		<false/>
		<key>ProvideConsoleGopEnable</key>
		<true/>
		<key>SetupVirtualMap</key>
		<true/>
		<key>ExternalDiskIcons</key>
		<false/>
		<key>DevirtualiseMmio</key>
		<false/>
		<key>ProtectUefiServices</key>
		<false/>
		<key>AppleXcpmForceBoost</key>
		<false/>
		<key>CustomSMBIOSGuid</key>
		<false/>
		<key>IncreasePciBarSize</key>
		<false/>
		<key>DisableSingleUser</key>
		<false/>
		<key>DiscardHibernateMap</key>
		<false/>
		<key>FuzzyMatch</key>
		<true/>
		<key>AppleXcpmExtraMsrs</key>
		<false/>
		<key>RebuildAppleMemoryMap</key>
		<false/>
		<key>AppleCpuPmCfgLock</key>
		<false/>
		<key>KernelCache</key>
		<string>Auto</string>
		<key>SignalAppleOS</key>
		<false/>
	</dict>

It's from v5123 config-sample.

drivers:

411823260_Screenshot2020-10-12at18_08_39.png.006a2e2584ffbf51b7e726c0a6a3d92b.png

On v5124 it's stopping at [EB|#LOG:EXITBS:START] 2020-10-12T15:49:15

After reverting the CLOVERX64.efi back to v5123 I could boot back to Desktop fine. I did NVRAM reset but same.

debug.log

Edited October 12, 2020 by kushwavez

Matgen84 · October 12, 2020

3 minutes ago, Slice said:

I see no problem. May be I poor see.

@Slice Thanks.

I will point out if there is a problem, like you I don't think so.

Jief_Machak · October 12, 2020

32 minutes ago, Matgen84 said:

I want to keep AptioMemoryFix for this P8Z77 mobo.

You can leave it, but it won't be used. It's filtered out by Clover because if it's loaded, it crash the embedded OC.

So you can't escape the new section.

Matgen84 · October 12, 2020

3 minutes ago, Jief_Machak said:

You can leave it, but it won't be used. It's filtered out by Clover because if it's loaded, it crash the embedded OC.

So you can't escape the new section.

It's a bad news for my old IvyBridge system. :cry: If I want to escape the new section: I keep r5122 :hysterical:

If AptioMemoryFix is loaded, it crashes the built-in OC. It also means that the others are unusable. They are all in the package.
So anyone who doesn't want to upgrade to Big Sur, will be forced to use the Quirks section and Openruntime.efi. I did not understand this. I thought the built-in OC only intervened for Big Sur.

D-an-W · October 12, 2020

While I compile r5124 (Thanks Devs!) could someone take a look at my files / folders and see if I have anything I no longer need please?

Spoiler

PG7 · October 12, 2020

Thanks Time

HP Probook 820 G2

intel i5-5300U

intel HD5500

+++ print

Clover r5124 100% boot BigSur beta9

Spoiler

Dragster27 · October 12, 2020

1 hour ago, kushwavez said:

On v5124 it's stopping at [EB|#LOG:EXITBS:START] 2020-10-12T15:49:15

After reverting the CLOVERX64.efi back to v5123 I could boot back to Desktop fine. I did NVRAM reset but same.

Same exact issue here... trying to boot Catalina 10.5.7 with r5124...

yapan4 · October 12, 2020

Bravo, Developers!

Nice result before Big Sur release!

EFI.zip

debug.log

bootlog.txt

Edited October 12, 2020 by yapan4

iCanaro · October 12, 2020

in my Z370 all right, start all OS

on the Z170 instead with this Clover 5124 I just couldn't start Catalina
I updated the config and tried several settings, but I didn't get anything

With Clover 5123-8e0f4ad24, however, it gets started properly

attach debug log @Jief_Machak

Z170_5124_config5124_NOK_debug.log

Z170_5124_config5123_NOK_debug.log

Z170_5123-8e0f4ad24_config5123_OK_debug.log

Z170_5123-8e0f4ad24_config5124_OK_debug.log

Edited October 12, 2020 by iCanaro

naiclub · October 12, 2020

Unfortunately 5124 will not load the DSDT that I have built and fixed. Go load bios instead Making it impossible to do all the work that the heart desires

edit...But agree that it boots faster than it used to be
The cause is most likely because the sound is not loaded. Graphics are not loaded like I did.

Edited October 12, 2020 by naiclub

Slice · October 12, 2020

1 hour ago, biricotico said:

@Slice

Here is a debug.log

debug.log.zip

Thank You!

All is fine in the log.

23 minutes ago, naiclub said:

Unfortunately 5124 will not load the DSDT that I have built and fixed. Go load bios instead Making it impossible to do all the work that the heart desires

edit...But agree that it boots faster than it used to be
The cause is most likely because the sound is not loaded. Graphics are not loaded like I did.

Do you have such a line in your log?

10:545  0:007  DSDT found in Clover volume OEM folder: \EFI\CLOVER\ACPI\patched\\DSDT.aml

naiclub · October 12, 2020

4 minutes ago, Slice said:
All is fine in the log.

Do you have such a line in your log?
10:545  0:007  DSDT found in Clover volume OEM folder: \EFI\CLOVER\ACPI\patched\\DSDT.aml
26:988 0:021 DSDT found in Clover volume OEM folder: \EFI\CLOVER\ACPI\patched\\DSDT.aml
27:035 0:047 DSDT found in Clover volume: \EFI\CLOVER\ACPI\patched\\DSDT.aml

bdmesg.log

This or not?

Slice · October 12, 2020

4 minutes ago, naiclub said:

26:988 0:021 DSDT found in Clover volume OEM folder: \EFI\CLOVER\ACPI\patched\\DSDT.aml
27:035 0:047 DSDT found in Clover volume: \EFI\CLOVER\ACPI\patched\\DSDT.aml

So DSDT is loaded? Why you tell opposite?

naiclub · October 12, 2020

1 minute ago, Slice said:

So DSDT is loaded? Why you tell opposite?

More surprising I didn't put the files on OEM.

Spoiler

Slice · October 12, 2020

All OK?

naiclub · October 12, 2020

15 minutes ago, Slice said:

All OK?

no ok Must sue with pictures

Spoiler

Which it should be like this An example from an old photo

Spoiler

Edited October 12, 2020 by naiclub

Slice · October 12, 2020

Catalina is not BigSur.

Mirone · October 12, 2020

2 hours ago, iCanaro said:

in my Z370 all right, start all OS

Pleae, post your EFI folder from Z370.

naiclub · October 12, 2020

2 hours ago, Slice said:

Catalina is not BigSur.

Spoiler

The result is the same. 13 .14 .15 11.

edit..

Spoiler

500532079_2563-10-1304_12_55.png.f5651bce789b6b9e668531658e930d91.png

Let's move to oem, the result is the same.

This overlap was left with two options.

Noteworthy Is there an exception where I have a black circle?

Let's update again I got your help mifjpn
That gave the code to create a clover until success

From .. ~% cd
  ~% rm -rf CloverBootloader
% git clone -b master --recurse-submodules https://github.com/CloverHackyColor/CloverBootloader.git

.....................................

~ % cd CloverBootloader/

% git status

% ./buildme

---------------------------------------------

buildme, Clover r5124 (SHA: a2ffdf864)
TOOLCHAIN: GCC53 (override example: './buildme XCODE8')

 1) build Clover
 2) build Clover with HFSPlus
 3) make pkg
 4) make app
 5) make app (with Clover)
 6) make iso
 7) build all
 8) test build (no autogen, no boot files)
 9) status
10) update Clover
11) show diff
12) open CloverV2/EFI/CLOVER directory
13) update Clover (reset changes)
14) clean BaseTools
15) quit
Please enter your choice:(7)..

.............................

buildme, Clover r5124 (SHA: a2ffdf864)
TOOLCHAIN: GCC53 (override example: './buildme XCODE8')

 1) build Clover
 2) build Clover with HFSPlus
 3) make pkg
 4) make app
 5) make app (with Clover)
 6) make iso
 7) build all
 8) test build (no autogen, no boot files)
 9) status
10) update Clover
11) show diff
12) open CloverV2/EFI/CLOVER directory
13) update Clover (reset changes)
14) clean BaseTools
15) quit
Please enter your choice: (15)

~ % cd      
~ % cd CloverBootloader
% git pull && git fetch
% ./buildme

buildme, Clover r5124 (SHA: a2ffdf864)
TOOLCHAIN: GCC53 (override example: './buildme XCODE8')

 1) build Clover
 2) build Clover with HFSPlus
 3) make pkg
 4) make app
 5) make app (with Clover)
 6) make iso
 7) build all
 8) test build (no autogen, no boot files)
 9) status
10) update Clover
11) show diff
12) open CloverV2/EFI/CLOVER directory
13) update Clover (reset changes)
14) clean BaseTools
15) quit
Please enter your choice: (7)

.................................................

buildme, Clover r5124 (SHA: a2ffdf864)
TOOLCHAIN: GCC53 (override example: './buildme XCODE8')

 1) build Clover
 2) build Clover with HFSPlus
 3) make pkg
 4) make app
 5) make app (with Clover)
 6) make iso
 7) build all
 8) test build (no autogen, no boot files)
 9) status
10) update Clover
11) show diff
12) open CloverV2/EFI/CLOVER directory
13) update Clover (reset changes)
14) clean BaseTools
15) quit
Please enter your choice: (15)

Again..

This time I knew something was missing (OcQuirks.efi), but I tried installing it over the old one and it still works fine. I didn't feel any difference.

But the solved DSDT problem does not load at all.

Edited October 12, 2020 by naiclub

D-an-W · October 12, 2020

Just noticed this in the boot.log

18:341  0:000  Intel GFX injection not set

Is that something that should be set (I do use iGFX) and if so how would I go about it please?

iCanaro · October 12, 2020

On my Z68 hack with Clover 5124 I managed to start windows, linux mageia, high sierra, mojave and catalina

only a little strange thing, the debug log was generated the first time I started high sierra, and then with all the other macOS, a debug log of zero Kb empty was generated
In case it could serve dev, I attach the generated log debugging and the preboot
starting with quirks and OpenRuntime

1678599298_Schermata2020-10-13alle00_08_15.png.3af034f3b18d698b3e01fcc0e561a1e3.png

Z68-5124-preboot.log

Z68_5124-d2bec9ba0_OK_high-sierra-debug.log

BuXb · October 12, 2020

What is the last version/ revision of Clover which supported Mac OS X Lion 10.7.5?

Clover General discussion

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites