Cyberdevs Posted July 18, 2020 Share Posted July 18, 2020 37 minutes ago, Slice said: Looks like I fixed it. Commit 762eac695 Test please. CLOVERX64.efi.zip I can boot to installer (Beta 2) it take a bit longer than usual. but if I try to boot into an installer version of Big Sur I get black screen and the same thing happens to Catalina. (with and without the OCQuircks in config) 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted July 18, 2020 Share Posted July 18, 2020 @Slice I'm clean installing Big Sur with the new commit 762eac695 and I'm half way through. I hope everything works out they way it should. Spoiler 2 Link to comment Share on other sites More sharing options...
Cyberdevs Posted July 18, 2020 Share Posted July 18, 2020 Sadly it reboots on third stage when the installer boots from the preboot volume to continue the installation 1 Link to comment Share on other sites More sharing options...
JorgeMax Posted July 18, 2020 Share Posted July 18, 2020 SMC error. Same message from the prints I sent He stays in the message and then goes to a screen with a signal on the monitor I can also boot the installer Link to comment Share on other sites More sharing options...
Pene Posted July 19, 2020 Share Posted July 19, 2020 12 hours ago, Slice said: Looks like I fixed it. Commit 762eac695 Test please. CLOVERX64.efi.zip For me it now boots succesfully 10.15.6 Link to comment Share on other sites More sharing options...
Matgen84 Posted July 19, 2020 Share Posted July 19, 2020 (edited) Hi @Slice I build from source, commit 762eac695 Test from USB pendrive connected to USB3 Port (Z390 Aorus Master) Can't boot USB Big Sur Beta 2 Installer : stuck at IOUSBHostInterface followed by crossed out circle Can't boot Big Sur Beta 2 installed: stuck at IOUSBHostInterface followed by crossed out circle Can't boot MacOS Catalina 10.15.5: Black screen instead of macOS login screen All my kexts are up to date. debug.log preboot.log Edited July 19, 2020 by Matgen84 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted July 19, 2020 Share Posted July 19, 2020 (edited) Hi @Slice Test commit cf5b919 from USB pendrive (Z390 Aorus Master config): After select OS, the verbose mode don't start immediately, there is a long black screen. Boot from USB Install macOS Beta 2 : Ok, "Choose Language" windows appears (don't test clean Big Sur clean). Very long to display the windows. Can't boot Installed macOS Beta 2: stuck at IOUSBHostInterface followed by crossed out circle Can't boot MacOS Catalina 10.15.5: stuck at IOUSBHostInterface followed by Black screen In the cases, booting sequence is very long Edited July 19, 2020 by Matgen84 Link to comment Share on other sites More sharing options...
iCanaro Posted July 19, 2020 Share Posted July 19, 2020 3 hours ago, Pene said: For me it now boots succesfully 10.15.6 I assume it should work on older macOS performed new test to start high sierra on the Z97, but does exactly as in the previous attempt, crashes to boot and does not get to desktop 1 Link to comment Share on other sites More sharing options...
pure.wisdom Posted July 19, 2020 Share Posted July 19, 2020 If I use BOOTX64.efi + CLOVERX64.efi in version 5120, I can not boot. I have to revert BOOTX64.efi from 5119 and boots successfully. The Quirks also works well Link to comment Share on other sites More sharing options...
yapan4 Posted July 19, 2020 Share Posted July 19, 2020 Tested commit 762eac695, stable boot 10.15.6, but... ... for experiment I enabled all Quirks, - still boot ok! Then uncheck all Quirks, - boot ok again! So, its looking that Quirk settings have no effect??? Files.zip 1 1 Link to comment Share on other sites More sharing options...
iCanaro Posted July 19, 2020 Share Posted July 19, 2020 I have now filled out the 5120 with the latest commits, first positive tests, now high sierra and cataline of my Z97 have started regularly Link to comment Share on other sites More sharing options...
iCanaro Posted July 19, 2020 Share Posted July 19, 2020 2 hours ago, yapan4 said: So, its looking that Quirk settings have no effect??? with a plist editor you have inserted in your config the ocquirks section in the sample? 1 Link to comment Share on other sites More sharing options...
jsl2000 Posted July 20, 2020 Share Posted July 20, 2020 (edited) On 7/19/2020 at 2:13 AM, Slice said: Looks like I fixed it. Commit 762eac695 Test please. CLOVERX64.efi.zip Thanks for this new version, but it did not work in my Z77 hackintosh. However previous modified version of 5119 did work for me at both Catalina and Big Sur in both Intel-CPUs and AMD-FX6300/Ryzen hackintoshs. I prefer this Clover bootloader than OpenCore 0.6.0 because it can fix CMOS Reset issue by wake-failure method at Big Sur and Catalina, while OpenCore still got this issue at Big Sur in my FX-6300 hackintosh. CLOVER.zip Edited July 20, 2020 by jsl2000 Link to comment Share on other sites More sharing options...
STLVNUB Posted July 20, 2020 Share Posted July 20, 2020 (edited) Why do so many people persist in making a USB to boot installer for Big Sur? Just make a small partition on the HDD you want to install it too and use create installmedia command, loads faster off HDD particuarly if you use SSD or nvme drive Edited July 20, 2020 by STLVNUB 1 1 Link to comment Share on other sites More sharing options...
D-an-W Posted July 20, 2020 Share Posted July 20, 2020 2 hours ago, STLVNUB said: Why do so many people persist in making a USB to boot installer for Big Sur? Just make a small partition on the HDD you want to install it too and use create installmedia command, loads faster off HDD particuarly if you use SSD or nvme drive Thats the way I have tested pre-releases previously and how I was going to test Big Sur but wasn't sure it would work, I assume now from you mentioning it that it does. Other than using all the latest builds of Clover / Kexts etc is there anything different about the process with Big Sur? Link to comment Share on other sites More sharing options...
Matgen84 Posted July 20, 2020 Share Posted July 20, 2020 (edited) 3 hours ago, STLVNUB said: Why do so many people persist in making a USB to boot installer for Big Sur? Just make a small partition on the HDD you want to install it too and use create installmedia command, loads faster off HDD particuarly if you use SSD or nvme drive Thats the way I have tested clean installation of macOS pre-releases previously on external or internal separated disk, and now test Clover commits for Big Sur while keeping an operational production hackintosh Edited July 20, 2020 by Matgen84 1 Link to comment Share on other sites More sharing options...
yapan4 Posted July 20, 2020 Share Posted July 20, 2020 8 hours ago, iCanaro said: with a plist editor you have inserted in your config the ocquirks section in the sample? There have been so many attempts that now I no longer know the way it was done. Final result i always verify and correct by PlistEdit. But something is wrong. What? Thank you and sorry my English. config.plist Link to comment Share on other sites More sharing options...
MICKHAEL Posted July 20, 2020 Share Posted July 20, 2020 4 minutes ago, mifjpn said: EFI4InsanelyMac2007201643.zip good. now check you link please. 1 Link to comment Share on other sites More sharing options...
jsl2000 Posted July 20, 2020 Share Posted July 20, 2020 45 minutes ago, mifjpn said: Hello,everyone! Good,news! I builded Clover5120(pre-reresase) at 2020-7/20(19 july) 12:33-JST(about 4hours before). And all kext was renewed by Goldfish64'site(https://onedrive.live.com/?authkey=!APjCyRpzoAKp4xs&id=FE4038DA929BFB23!455036&cid=FE4038DA929BFB23) (almost kext update july 20) And QcQuirks setting below Quirks AvoidRuntimeDefrag:NO DevirtualiseMmio:YES DisableSingleUser:NO DisableVariableWrite:NO DiscardHibernateMap:NO EnableSafeModeSlide:YES EnableWriteUnprotector:YES ForceExitBootServices:NO MmioWhitelist Array=0 ProtectMemoryRegions:NO ProtectSecureBoot:NO ProtectUefiServices:NO ProvideConsoleGopEnable:YES ProvideCustomSlide:YES ProvideMaxSlide:0 RebuildAppleMemoryMap:YES SetupVirtualMap:YES SignalAppleOS:NO SyncRuntimePermissions:YES I have confirmed that Catalina (10.15.6) can be started. And Big Sur Developers Beta 2 too! (i7-8700,ASUS-PRIME-H370-A/CSM,16GB(8GB+8GB),MSI RX-570 8GB OC,Pionner BD-209) EFI4InsanelyMac2007201643.zip I made a USB installer. At the second boot, it became a loop of program execution failure and it did not work. I think there are some improvements. But overall, it's great. Developers are Cool!! Can you try this setting as mine which worked better than yours ? Link to comment Share on other sites More sharing options...
Matgen84 Posted July 20, 2020 Share Posted July 20, 2020 (edited) Hi @Slice All test on Z390 Aorus Master config Commit b544e86: Can't boot Installer Big Sur and Installed Big Sur on HDD---> stuck at IOUSBHostInterface followed by crossed out circle Can Boot MacOS Catalina10.15.5 Now I build and test latest commit 7188cde : Idem Can't boot Installer Big Sur and Installed Big Sur on HDD---> stuck at IOUSBHostInterface followed by crossed out circle Can Boot MacOS Catalina10.15.5 Edited July 20, 2020 by Matgen84 1 Link to comment Share on other sites More sharing options...
Slice Posted July 20, 2020 Share Posted July 20, 2020 Test commit 7188cde 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted July 20, 2020 Share Posted July 20, 2020 (edited) 2 minutes ago, Slice said: Test commit 7188cde Thanks. Already tested with no luck with Big Sur, see my previous post Edited July 20, 2020 by Matgen84 Link to comment Share on other sites More sharing options...
Cyberdevs Posted July 20, 2020 Share Posted July 20, 2020 Just now, Slice said: Test commit 7188cde I just tested this commit and Catalina works ok but Big Sur seems to have the same issues as before. Black Screen on booting the installed Big Sur and also the installer unless I change the SMBIOS from iMac15,1 to iMac18,1 also USB 3.0 ports don't work . 1 Link to comment Share on other sites More sharing options...
iCanaro Posted July 20, 2020 Share Posted July 20, 2020 2 hours ago, yapan4 said: There have been so many attempts that now I no longer know the way it was done. Final result i always verify and correct by PlistEdit. But something is wrong. What? apparently nothing serious maybe recreate your config again from the sample included in clover iso 5120 and obvious, but always better to specify, are you using OcQuirks and OpenRuntime included in Clover 5120? config-yapan4.plist.zip 1 Link to comment Share on other sites More sharing options...
yapan4 Posted July 20, 2020 Share Posted July 20, 2020 (edited) 9 hours ago, iCanaro said: apparently nothing serious maybe recreate your config again from the sample included in clover iso 5120 and obvious, but always better to specify, are you using OcQuirks and OpenRuntime included in Clover 5120? config-yapan4.plist.zip You're right. I probably mixed the OpenCore and Clover drivers. So now I need OcQuirks and OpenRuntime from Clover and appropriate Clover version. Edited July 20, 2020 by yapan4 Link to comment Share on other sites More sharing options...
Recommended Posts