Slice Posted July 29, 2018 Share Posted July 29, 2018 What is the problem for you to raise a question about FACS? The question was closed several years ago. Duplicates exist due to Rsdt-Xsdt and correctly treats by Clover. Link to comment Share on other sites More sharing options...
FredWst Posted July 29, 2018 Share Posted July 29, 2018 (edited) 1 hour ago, Slice said: What is the problem for you to raise a question about FACS? The question was closed several years ago. Duplicates exist due to Rsdt-Xsdt and correctly treats by Clover. There is 2 versions of FACS in my case revision 1 and revision 2. One Rsdt and one Xsdt. After Clover patch it show 2 FACS with same revision. So, is it a normal situation to get FACS and FACS-1 ? (MacIASL) Fred Edited July 29, 2018 by FredWst Link to comment Share on other sites More sharing options...
Slice Posted July 29, 2018 Share Posted July 29, 2018 Yes it is normal. We know this and correctly use this. And I am not responsible for maciasl. Link to comment Share on other sites More sharing options...
surfinchina Posted July 30, 2018 Share Posted July 30, 2018 Hi, for some reason, after I updated my Clover (to 46xx and then to 4617) it's taking about 15 seconds to get from the initial clover splash screen to the clover menu. Is this normal for the clovers of the last month or is my install wacky? Previously it was 1 second. Thanks. Link to comment Share on other sites More sharing options...
Slice Posted July 31, 2018 Share Posted July 31, 2018 10 hours ago, surfinchina said: Hi, for some reason, after I updated my Clover (to 46xx and then to 4617) it's taking about 15 seconds to get from the initial clover splash screen to the clover menu. Is this normal for the clovers of the last month or is my install wacky? Previously it was 1 second. Thanks. If we look into debug.log then we may see time for each operation. Link to comment Share on other sites More sharing options...
arsradu Posted August 1, 2018 Share Posted August 1, 2018 (edited) Hehe! Niice! I wish that someone would find a fix for the Error 65 when building with CLT 10 and UDK2018 (with no extra customisations). I'm currently using 10L221o and...still the same error. With Xcode 10 Beta 2 I don't get this error, but I get a build.py error... So, not sure if THAT was a bug, or this one is. But one thing is for sure, it doesn't seem to work (at least for me) with the latest Xcode 10 and Command Line Tools. Aaand it does work with CLT 9.4.1. Also, when building with CLT 9.4.1, the Clover Updater is white, even in Dark Mode... Not sure if that's intended. Probably yes... But I can't build with CLT 10 in Mojave (get error 65), so I can't test this theory. Anyway, nice job! Congrats guys! Looks cool! Edited August 1, 2018 by arsradu 1 Link to comment Share on other sites More sharing options...
Allan Posted August 1, 2018 Share Posted August 1, 2018 In this new version, there's a little (very little) issue with the translation: Sorry if this post is silly. 2 Link to comment Share on other sites More sharing options...
chris1111 Posted August 2, 2018 Share Posted August 2, 2018 (edited) Thanks Slice and Clovy for the new change great change it was time that there is something new on this side, I had to ask a few years ago I prefere only the New Logo Without icon with arrow that looks a bit like recovery HD Icon, so I mode my own Icon panel Thats what its like now Light Mode Dark Mode EDIT ++ The only Graphics card showing DARK Panel now is my GeForce 210 in Mojave Beta 5 This is Broken for my GT 710 in Mojave Beta 5 Edited August 2, 2018 by chris1111 1 Link to comment Share on other sites More sharing options...
Matgen84 Posted August 2, 2018 Share Posted August 2, 2018 10 hours ago, arsradu said: Hehe! Niice! I wish that someone would find a fix for the Error 65 when building with CLT 10 and UDK2018 (with no extra customisations). I'm currently using 10L221o and...still the same error. With Xcode 10 Beta 2 I don't get this error, but I get a build.py error... So, not sure if THAT was a bug, or this one is. But one thing is for sure, it doesn't seem to work (at least for me) with the latest Xcode 10 and Command Line Tools. Aaand it does work with CLT 9.4.1. Also, when building with CLT 9.4.1, the Clover Updater is white, even in Dark Mode... Not sure if that's intended. Probably yes... But I can't build with CLT 10 in Mojave (get error 65), so I can't test this theory. Anyway, nice job! Congrats guys! Looks cool! Like @arsradu I've error 65 on Clover Prefpane/ Clover Updater when make package with CLT10 Xcode Beta 5 and UDK 2018. Only Xcode 10 Beta 2 don't get errors. Any solutions? Please. Anyway great job for this change 1 Link to comment Share on other sites More sharing options...
arsradu Posted August 2, 2018 Share Posted August 2, 2018 (edited) Yeah, with Beta 2, I get this: Active Platform = /Users/jimmy/src/UDK2018/Clover/Clover.dsc Flash Image Definition = /Users/jimmy/src/UDK2018/Clover/Clover.fdf Processing meta-data ... done! Building ... /Users/jimmy/src/UDK2018/MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf [X64] Building ... /Users/jimmy/src/UDK2018/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf [X64] make: *** No rule to make target `/Users/jimmy/src/UDK2018/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BasePcdLibNull/BasePcdLibNull/OUTPUT/object_files.lst', needed by `/Users/jimmy/src/UDK2018/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BasePcdLibNull/BasePcdLibNull/OUTPUT/BasePcdLibNull.lib'. Stop. build.py... : error 7000: Failed to execute command make tbuild [/Users/jimmy/src/UDK2018/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BasePcdLibNull/BasePcdLibNull] build.py... : error 7000: Failed to execute command make tbuild [/Users/jimmy/src/UDK2018/Build/Clover/RELEASE_XCODE8/X64/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull] build.py... : error F002: Failed to build module /Users/jimmy/src/UDK2018/MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf [X64, XCODE8, RELEASE] - Failed - It does build successfully in the end. But I doubt that this error is ok. Then again, this is with Beta 2... Anything newer than that can't build (error 65), but also no build.py error. Edited August 2, 2018 by arsradu 1 Link to comment Share on other sites More sharing options...
Slice Posted August 2, 2018 Share Posted August 2, 2018 This error can be corrected with ./ebuild.sh -fr 2 Link to comment Share on other sites More sharing options...
arsradu Posted August 2, 2018 Share Posted August 2, 2018 (edited) 3 hours ago, Slice said: This error can be corrected with ./ebuild.sh -fr You’re right. It is. But with ./ebuild.sh -fr I don’t get the external drivers anymore. That’s why I switched to ./ebuild.sh —ext-pre. Is there any way to combine the two? Or how to add them to the build? Edit: Nevermind. Apparently ./ebuild.sh --ext-pre -fr works. :)) Not sure if that's how you do it...But...well, works. @Slice I noticed something. The official builds have "-64" added to all the drivers (including external ones). But when I build it, the external drivers don't have that suffix. I was wondering how to add it... Because, otherwise, when I install a Beta version after an official one, I'll get two ApfsDriverLoaders in drivers64UEFI. One is just ApfsDriverLoader. The other one is added by the official build and it's ApfsDriverLoader-64. I was wondering how to fix that. Edited August 2, 2018 by arsradu 1 Link to comment Share on other sites More sharing options...
chris1111 Posted August 2, 2018 Share Posted August 2, 2018 (edited) Now for no special reason Clover Panel on Dark Mode works on my GeForce GT 710 Some times work some time not Edited August 2, 2018 by chris1111 Link to comment Share on other sites More sharing options...
Matgen84 Posted August 2, 2018 Share Posted August 2, 2018 1 hour ago, arsradu said: You’re right. It is. But with ./ebuild.sh -fr I don’t get the external drivers anymore. That’s why I switched to ./ebuild.sh —ext-pre. Is there any way to combine the two? Or how to add them to the build? Edit: Nevermind. Apparently ./ebuild.sh --ext-pre -fr works. :)) Not sure if that's how you do it...But...well, works. @Slice I noticed something. The official builds have "-64" added to all the drivers (including external ones). But when I build it, the external drivers don't have that suffix. I was wondering how to add it... Because, otherwise, when I install a Beta version after an official one, I'll get two ApfsDriverLoaders in drivers64UEFI. One is just ApfsDriverLoader. The other one is added by the official build and it's ApfsDriverLoader-64. I was wondering how to fix that. you can try --ext-co (checkout & build external drivers at ..src/EXT_PACKAGES) Instead of --ext-pre 1 Link to comment Share on other sites More sharing options...
Slice Posted August 3, 2018 Share Posted August 3, 2018 Any corrections in the package in other languages? 2 Link to comment Share on other sites More sharing options...
arsradu Posted August 3, 2018 Share Posted August 3, 2018 14 hours ago, Matgen84 said: you can try --ext-co (checkout & build external drivers at ..src/EXT_PACKAGES) Instead of --ext-pre Thank you. That fixed it. 1 Link to comment Share on other sites More sharing options...
arsradu Posted August 3, 2018 Share Posted August 3, 2018 (edited) 1 hour ago, Slice said: Any corrections in the package in other languages? Slice, I'd love to confirm for other languages, but I was never able to see Clover's prefPane in other language than English. I don't know why... Right now, system language is set to RO, but Clover's prePane language is still EN. Not sure if that's intended. And for EN, yes, the bug reported before where на was not translated to EN, is now fixed (build 4631). But still...not sure how to check other languages when the prefPane language is always EN for me. I checked the installer though. And that one seems to be correctly translated to RO. But...prefPane was always in EN for me, despite the fact that there is a translation for it (in RO), inside the build. Edited August 3, 2018 by arsradu 1 Link to comment Share on other sites More sharing options...
Sherlocks Posted August 3, 2018 Share Posted August 3, 2018 Any corrections in the package in other languages?i'm working for korean나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment Share on other sites More sharing options...
Slice Posted August 3, 2018 Share Posted August 3, 2018 4 hours ago, arsradu said: Slice, I'd love to confirm for other languages, but I was never able to see Clover's prefPane in other language than English. I don't know why... Right now, system language is set to RO, but Clover's prePane language is still EN. Not sure if that's intended. And for EN, yes, the bug reported before where на was not translated to EN, is now fixed (build 4631). But still...not sure how to check other languages when the prefPane language is always EN for me. I checked the installer though. And that one seems to be correctly translated to RO. But...prefPane was always in EN for me, despite the fact that there is a translation for it (in RO), inside the build. As I see prefPane contains only en.lproj. I don't know how to do it with other languages. But Clover package already contains ro.po file. 2 Link to comment Share on other sites More sharing options...
Sherlocks Posted August 3, 2018 Share Posted August 3, 2018 1 minute ago, Slice said: As I see prefPane contains only en.lproj. I don't know how to do it with other languages. But Clover package already contains ro.po file. korean lang is no problem in prefPane 1 Link to comment Share on other sites More sharing options...
vector sigma Posted August 3, 2018 Share Posted August 3, 2018 @arsradu please try r4634 and let me know 2 Link to comment Share on other sites More sharing options...
arsradu Posted August 3, 2018 Share Posted August 3, 2018 20 minutes ago, Sherlocks said: korean lang is no problem in prefPane Lol. What the....? :)))) Then I'm confused. Also, I can't really test the issue described before, since my PrefPane is only in EN...and for EN, it's been already fixed. Can you confirm the drop-down for "Force mount selected ESP at startup" doesn't contain any translation errors? 2 minutes ago, vector sigma said: @arsradu please try r4634 and let me know On it, sir. Link to comment Share on other sites More sharing options...
arsradu Posted August 3, 2018 Share Posted August 3, 2018 33 minutes ago, Slice said: As I see prefPane contains only en.lproj. I don't know how to do it with other languages. But Clover package already contains ro.po file. Yep, it does. And the ro.po file itself already has the necessary translations for PrefPane, for as far as I could see. I mean, I should probably be more confident about this, cause I added them there. :))) But yeah...not sure why it doesn't use them... Maybe there's something missing somewhere. But I don't think it will just not display any of those translations and only in PrefPane... That seems weird. Also, even weirder is the fact that it seems to work for KO. :)) I mean...what the hell? :)) 1 Link to comment Share on other sites More sharing options...
vector sigma Posted August 3, 2018 Share Posted August 3, 2018 14 minutes ago, arsradu said: On it, sir. still the same? Link to comment Share on other sites More sharing options...
arsradu Posted August 3, 2018 Share Posted August 3, 2018 (edited) Actually no. Works fine now with clean sources in HS using Xcode 9 with CLT set to CLT 10. I’m testing Mojave as we speak (same CLT, only Xcode 10 Beta 5). Since it didn’t work before with the HS setup above, and it does now, I’m expecting it to work with Mojave as well. I’ll update you as soon as possible. I’m doing it with clean sources on both. So that will take a little bit more than just the building itself. But so far, yeah, seems to be working. Edited August 3, 2018 by arsradu 2 Link to comment Share on other sites More sharing options...
Recommended Posts