arsradu Posted January 23, 2018 Share Posted January 23, 2018 Guys, I just want to clarify one thing, since it's a bit confusing to me. Starting with the addition of OsxAptioFix3Drv (which supports NVRAM), do we still need EmuVariableUefi for non-hardware NVRAM motherboards, such as series 100, in order to have the Nvidia Driver working? They seem to work very well in parallel. But I was just wondering if this particular piece of software (the Nvidia driver) will still work without the EmuVariable driver (considering I'm using OsxAptioFix3 instead). Has anyone tried that so far? Link to comment Share on other sites More sharing options...
SavageAUS Posted January 23, 2018 Share Posted January 23, 2018 Guys, I just want to clarify one thing, since it's a bit confusing to me. Starting with the addition of OsxAptioFix3Drv (which supports NVRAM), do we still need EmuVariableUefi for non-hardware NVRAM motherboards, such as series 100, in order to have the Nvidia Driver working? They seem to work very well in parallel. But I was just wondering if this particular piece of software (the Nvidia driver) will still work without the EmuVariable driver (considering I'm using OsxAptioFix3 instead). Has anyone tried that so far? Yes we no longer need EmuVariableUefi for Nvidia. Sent from my SM-G930F using Tapatalk Since rev980 Clover has enough functions to make iMessage working. You have to set correct UUID, sn, ROM, MLB and register Apple services official way agree with all Apple's claim. No matter what I try I cannot get iMessage to work. Do you have any guides to get it working? Sent from my SM-G930F using Tapatalk 1 Link to comment Share on other sites More sharing options...
mhaeuser Posted January 23, 2018 Share Posted January 23, 2018 Guys, I just want to clarify one thing, since it's a bit confusing to me. Starting with the addition of OsxAptioFix3Drv (which supports NVRAM), do we still need EmuVariableUefi for non-hardware NVRAM motherboards, such as series 100, in order to have the Nvidia Driver working? They seem to work very well in parallel. But I was just wondering if this particular piece of software (the Nvidia driver) will still work without the EmuVariable driver (considering I'm using OsxAptioFix3 instead). Has anyone tried that so far? Series 100 and up is exactly what AF3 fixes... 2 Link to comment Share on other sites More sharing options...
arsradu Posted January 23, 2018 Share Posted January 23, 2018 Yes we no longer need EmuVariableUefi for Nvidia. Sent from my SM-G930F using Tapatalk No matter what I try I cannot get iMessage to work. Do you have any guides to get it working? Sent from my SM-G930F using Tapatalk Series 100 and up is exactly what AF3 fixes... Got it. Thank you both very much for your feedback! So far so good. SavageAUS, I personally haven't gotten any issues with iMessage... So if the serials are right, so you can successfully authenticate on Apple's servers, I think...it should work...? Do you get the generic message to contact Apple when you try to login? Or something else? Link to comment Share on other sites More sharing options...
MICKHAEL Posted January 23, 2018 Share Posted January 23, 2018 Yes we no longer need EmuVariableUefi for Nvidia. Sent from my SM-G930F using Tapatalk No matter what I try I cannot get iMessage to work. Do you have any guides to get it working? Sent from my SM-G930F using Tapatalk You need to dump some real MBL and MAC Sent from my Nexus 4 using Tapatalk Link to comment Share on other sites More sharing options...
SavageAUS Posted January 23, 2018 Share Posted January 23, 2018 Got it. Thank you both very much for your feedback! So far so good. SavageAUS, I personally haven't gotten any issues with iMessage... So if the serials are right, so you can successfully authenticate on Apple's servers, I think...it should work...? Do you get the generic message to contact Apple when you try to login? Or something else? Something like "an error occurred during authentication please try again". I have working nvram. My serial number is invalid according to apple. My serial number matches to the right mac on everymac. Ethernet is builtin and en0. Have followed numerous guides. Sent from my SM-G930F using Tapatalk Link to comment Share on other sites More sharing options...
arsradu Posted January 23, 2018 Share Posted January 23, 2018 Something like "an error occurred during authentication please try again". Sent from my SM-G930F using Tapatalk Hmm... Did it work before? What changed in the meantime? Also, are you using automatic time zone set to ON? If not, maybe you can switch it on... Some people say it could be a server issue here, caused by the wrong date and time. I could be very wrong though. I'm still trying to find a probable cause here. But...you can try. Maybe it helps. Link to comment Share on other sites More sharing options...
SavageAUS Posted January 23, 2018 Share Posted January 23, 2018 Hmm... Did it work before? What changed in the meantime? Also, are you using automatic time zone set to ON? If not, maybe you can switch it on... Some people say it could be a server issue here, caused by the wrong date and time. I could be very wrong though. I'm still trying to find a probable cause here. But...you can try. Maybe it helps. No I've never ever had working iMessage.I'll check time zone settings. Sent from my SM-G930F using Tapatalk Link to comment Share on other sites More sharing options...
camillionario Posted January 23, 2018 Share Posted January 23, 2018 No I've never ever had working iMessage. I'll check time zone settings. share your config plist to take a look. I have several config.plist with iMessage and Facetime ok. Link to comment Share on other sites More sharing options...
chris1111 Posted January 23, 2018 Share Posted January 23, 2018 No I've never ever had working iMessage. I'll check time zone settings. Sent from my SM-G930F using Tapatalk Try this Edit enable message FaceTime in my new Mavercicks now with that way Message FaceTime.pdf.zip 1 Link to comment Share on other sites More sharing options...
Cyberdevs Posted January 23, 2018 Share Posted January 23, 2018 No I've never ever had working iMessage. I'll check time zone settings. Sent from my SM-G930F using Tapatalk I suggest you remove your device from iCloud, create a new config.plist and then reconfigure your new config as same as the old one, after choosing the SMBIOS generate several serial numbers then in system parameters create a new custom UUID and then go to Rt Variables and generate a new ROM then save the config and reboot. Just copy the existing EFI folder on a USB disk just in case if anything goes wrong then try with the new settings and sign in iCloud and iMessage. 1 Link to comment Share on other sites More sharing options...
Funky frank Posted January 23, 2018 Share Posted January 23, 2018 What happened? Link to comment Share on other sites More sharing options...
SavageAUS Posted January 24, 2018 Share Posted January 24, 2018 I suggest you remove your device from iCloud, create a new config.plist and then reconfigure your new config as same as the old one, after choosing the SMBIOS generate several serial numbers then in system parameters create a new custom UUID and then go to Rt Variables and generate a new ROM then save the config and reboot. Just copy the existing EFI folder on a USB disk just in case if anything goes wrong then try with the new settings and sign in iCloud and iMessage. Yeah I've tried that and didn't work unfortunately. Could it be because I don't have an iPhone? And have never setup iMessage on a real mac? Sent from my SM-G930F using Tapatalk Link to comment Share on other sites More sharing options...
Pavo Posted January 24, 2018 Share Posted January 24, 2018 Yeah I've tried that and didn't work unfortunately. Could it be because I don't have an iPhone? And have never setup iMessage on a real mac? Sent from my SM-G930F using Tapatalk That would be interesting, I would imagine you could still use Messages without ever owning a phone but would only be able to send messages to Apple ID members only. Not sure if it would even be possible to activate Messages without activating the service on a iPhone first. Link to comment Share on other sites More sharing options...
SavageAUS Posted January 24, 2018 Share Posted January 24, 2018 That would be interesting, I would imagine you could still use Messages without ever owning a phone but would only be able to send messages to Apple ID members only. Not sure if it would even be possible to activate Messages without activating the service on a iPhone first.I don't suppose anyone has a spare iMessage account that works that I could test? You can change the password before allowing me to use it and change it again after. Sent from my SM-G930F using Tapatalk Link to comment Share on other sites More sharing options...
Cyberdevs Posted January 24, 2018 Share Posted January 24, 2018 Yeah I've tried that and didn't work unfortunately. Could it be because I don't have an iPhone? And have never setup iMessage on a real mac? Sent from my SM-G930F using Tapatalk Yeah that will explain it Link to comment Share on other sites More sharing options...
MICKHAEL Posted January 24, 2018 Share Posted January 24, 2018 It works without activating on iPhone, or maybe I am just lucky) use MBL and ROM from real Mac! Sent from my Nexus 4 using Tapatalk 1 Link to comment Share on other sites More sharing options...
Slice Posted January 24, 2018 Share Posted January 24, 2018 You need to dump some real MBL and MAC Sent from my Nexus 4 using Tapatalk I have own MLB and MAC, non-Apple. And I registered AppleID before I bought iPhone. All works! I have to remind that you should have a payable account (VISA or something else). Link to comment Share on other sites More sharing options...
SavageAUS Posted January 24, 2018 Share Posted January 24, 2018 I have own MLB and MAC, non-Apple. And I registered AppleID before I bought iPhone. All works! I have to remind that you should have a payable account (VISA or something else). I do have my visa card attached to my apple id. Unless a sure fire way is described I'll wait a few months when I switch from android to apple. Sent from my SM-G930F using Tapatalk Link to comment Share on other sites More sharing options...
MICKHAEL Posted January 24, 2018 Share Posted January 24, 2018 I have own MLB and MAC, non-Apple. And I registered AppleID before I bought iPhone. All works! I have to remind that you should have a payable account (VISA or something else). No Visa non payable account. Sent from my Nexus 4 using Tapatalk Link to comment Share on other sites More sharing options...
ccphuc2016 Posted January 24, 2018 Share Posted January 24, 2018 Why my PC install Clover 4380 - 4387 - 4391 to HDD bios UEFI - GPT boot into macOS 10.13.2 & 10.13.3 verry slow 15 minute ? Install for UEFI booting only Install Clover in the ESP OsxAptioFix2Drv + EmuVariableUefi-64.efi HELP ME ? THANK Link to comment Share on other sites More sharing options...
artur_pt Posted January 24, 2018 Share Posted January 24, 2018 hello maybe u don't need EmuVariableUefi-64.efi try without it and use OsxAptioFix3Drv.efi good hack 1 Link to comment Share on other sites More sharing options...
ccphuc2016 Posted January 24, 2018 Share Posted January 24, 2018 hello maybe u don't need EmuVariableUefi-64.efi try without it and use OsxAptioFix3Drv.efi good hackI install Cliver 4391 on HDD I insstall Clover 4391 on HDD bios UEFI- GPT - Install for UEFI booting - only - Install Clover in the ESP - OsxAptioFix2Drv + EmuVariableUefi-64.efi I download FakeSMC unzip & copy 6 file to my Clover 4391 on HDD path EFI\Clover\Kexts\other https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/ Boot to login green verry fast 1minute Thank Link to comment Share on other sites More sharing options...
el_charlie Posted January 24, 2018 Share Posted January 24, 2018 I insstall Clover 4391 on HDD bios UEFI- GPT - Install for UEFI booting - only - Install Clover in the ESP - OsxAptioFix2Drv + EmuVariableUefi-64.efi I download FakeSMC unzip & copy 6 file to my Clover 4391 on HDD path EFI\Clover\Kexts\other https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/ Boot to login green verry fast 1minute Thank HWMonitor is an app, there's no need to have it on CLOVER/Kexts/Other, Lol. Put that in /Applications. Like people said, use OsxAptioFix3 without Emuvariable. Make a backup USB first in case it doesn't boot. You can also try with AptioMemoryFix instead of OsxAptio. 1 Link to comment Share on other sites More sharing options...
arsradu Posted January 24, 2018 Share Posted January 24, 2018 Also, @el_charllie, if I may, I think you don't need RC scripts anymore...if you're using OsxAptioFix3Drv. Someone, please, correct me if I'm wrong, but I didn't have any issues so far without that. Now, I know Clover is meant to be as customisable as possible, so people can use whatever they need, if they need it, and it's been an amazing tool for me for YEARS, but for the sake of usability, do you guys think it would be maybe better to allow users to select only drivers which are not mutually exclusive? For example, if you select OsxAptioFix3Drv, automatically deselect EmuVariableUefi since you don't need it anymore? This way, it's clear for everyone that they are doing the same thing, and they're not needed (or not supposed to work) together. In this particular case, having them both won't create any issues (at least as far as I'm concerned), but there could be cases where you're not supposed to mix two drivers, because that WILL create issues. And, especially for those cases, such a feature would be nice to have. I know this is like a minor "issue" (if you can call it an issue in the first place). I don't know... It's just an idea. Also, I know that someone will probably come back and say something like "Clover is not meant for stupid people" ). Still, I think it would be a good idea for newcomers. Clover has a pretty steep learning curve, in my opinion. And I personally found a lot of things to be confusing at the beginning (especially coming from Chameleon). Point I'm trying to make is this: I know it's not for "stupid people". Still, I don't think that's a reason not to make it a bit more user friendly, if that helps to avoid confusion (and possible issues) for newcomers. 4 Link to comment Share on other sites More sharing options...
Recommended Posts