Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30,155 posts in this topic

Recommended Posts

stinga11
stinga11
Posted
Posted

Regards, I can confirm that the ApatioFixDrv3 and AptioMemoryFix works with native NVRAM. I tested the NVRAM was working with (sudo nvram test = "value") then I restarted and verified with (sudo nvram -p) and it was working perfect. but

 

		<key>NvidiaWeb</key>
		<true/> 
doesnt works.

 

To have the Nvidia web driver working I need to use the

		<key>Arguments</key>
		<string>nvda_drv=1</string>
Link to comment
Share on other sites
Sherlocks
Sherlocks
Posted
Posted

Try the OsxAptiofixDrv, I was in same boat as you, been using OsxAptioFix2Drv for years, but with 4385, black screen.

 

my laptop needs OsxAptioFix2Drv or OsxAptioFix2Drv-free2000. i'm using OsxAptioFix2Drv-free2000 + EmuVariableUefi-64.efi for years.

it's best result for my laptop. and there is no language issue after update.

 

original OsxAptioFix2Drv sometimes shown failed boot(stop logo). maybe early boot. so i changed other driver.

OsxAptioFix2Drv-free2000 never get failed boot.

Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted

So let me see if I'm correct.

1. OsxAptioFix3Drv-64.efi is the now the recommended AptioFix as it incorporates and or gets rid of the need for EmuVariableUefi-64 and RC Scripts and is preferred over OsxAptioFix2Drv-64.efi and OsxAptioFixDrv-64.efi?

 

If a newbie was to come along with all three of these being available and all looking so similar which one would he/she choose based on hardware?

 

Which aptio is suited for which hardware or is it just bios manufacturer based?

 

Forgive me if this has been answered.

 

P.S. Clover r4386 working fine here.

 

Sent from my SM-G930F using Tapatalk

Link to comment
Share on other sites
Zenith432
Zenith432
Posted
Posted

@Sherlocks, STLVNUB:

Problem fixed in r4387.  You can return to same setup and driver names you were using < r4384.

 

@SavageAUS:

The priority is

AptioMemoryFix

OsxAptioFix3Drv

OsxAptioFix2Drv

OsxAptioFixDrv

OsxLowMemFixDrv

 

Use the highest that works.

If you don't need nvram access from OS/X and don't want the extra overhead, delete the first two from the list.

  • Like 7
Link to comment
Share on other sites
SavageAUS
SavageAUS
Posted
Posted

 

 

@Sherlocks, STLVNUB:

Problem fixed in r4387. You can return to same setup and driver names you were using < r4384.

 

@SavageAUS:

The priority is

AptioMemoryFix

OsxAptioFix3Drv

OsxAptioFix2Drv

OsxAptioFixDrv

OsxLowMemFixDrv

 

Use the highest that works.

If you don't need nvram access from OS/X and don't want the extra overhead, delete the first two from the list.

Thanks for clarification.

Where is AptioMemoryFix located? I didn't see it in installer.

 

Sent from my SM-G930F using Tapatalk

  • Like 2
Link to comment
Share on other sites
ccphuc2016
ccphuc2016
Posted
Posted

OsxAptioFix2Drv-free2000 + EmuVariableUefi-64.efi works again on 4387.

thank you so much!

whrere link download r4387 ?

 

How to install new interface clover r4380 for bios UEFI GPT ?

 

 

Why is it so slow boot when install clover 4380?

 

thank

 

CaiCloverh5.png

 

CaiCloverh6.png

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

CLOVER 4390 and AptioMemoryFix works a charm on desktop machine. Still working nvram.

 

For the life of me I've never been able to get iMessage working with clover.

Any updated ways to make it work?

 

Sent from my SM-G930F using Tapatalk

Since rev980 Clover has enough functions to make iMessage working.

You have to set correct UUID, sn, ROM, MLB and register Apple services official way agree with all Apple's claim.

Link to comment
Share on other sites
Dan ZG
Dan ZG
Posted
Posted

I have some questions about DSDT (*.aml) loading in Clover. I've posted in a few places and haven't gotten definitive answers.
 
Say I have 2 (or more) .aml files within EFI/CLOVER/ACPI/patched -- say dsdt1.aml and dsdt2.aml.
I want to compare how they affect my machine; as well as NOT loading either of them.
So in config.plist I tried 'DSDT Name' set to null, i.e., there is no key/value.
But checking bdmesg it shows:

Inserting dsdt1.aml from EFI\CLOVER\ACPI\patched ... Success
Inserting dsdt2.aml from EFI\CLOVER\ACPI\patched ... Success

My questions:

  • Does "Inserting" mean they were both loaded? Or just recognized?
  • Do they have to be called DSDT or can they be called anything?
  • In Clover options /Acpi Patching, if I want to specify which to load, do I include .aml, or just dsdt1?
  • Can I specify a folder in Clover options or does the AML have to reside within /ACPI/patched?
  • If I want to NOT load ANY aml ... Do I need to actually remove them from ACPI/patched?
  • Can I create just an empty file called none.aml and use that in Clover options in order to not load any AML?
  • Is there any definitive way in MacOS to check which (if any) AML has been loaded? (I tried extracting DSDT with "MaciASL.app" but it did not match either of my AML files.)

I don't want to remove them from ACPI/patched, because, if for some reason, I can't boot MacOS, then it will be a pain trying to putt them back.
 
Thanks!

Link to comment
Share on other sites
el_charlie
el_charlie
Posted
Posted

I have some questions about DSDT (*.aml) loading in Clover. I've posted in a few places and haven't gotten definitive answers.

 

Say I have 2 (or more) .aml files within EFI/CLOVER/ACPI/patched -- say dsdt1.aml and dsdt2.aml.

I want to compare how they affect my machine; as well as NOT loading either of them.

So in config.plist I tried 'DSDT Name' set to null, i.e., there is no key/value.

But checking bdmesg it shows:

 

Inserting dsdt1.aml from EFI\CLOVER\ACPI\patched ... Success
Inserting dsdt2.aml from EFI\CLOVER\ACPI\patched ... Success
My questions:

  • Does "Inserting" mean they were both loaded? Or just recognized?
  • Do they have to be called DSDT or can they be called anything?
  • In Clover options /Acpi Patching, if I want to specify which to load, do I include .aml, or just dsdt1?
  • Can I specify a folder in Clover options or does the AML have to reside within /ACPI/patched?
  • If I want to NOT load ANY aml ... Do I need to actually remove them from ACPI/patched?
  • Can I create just an empty file called none.aml and use that in Clover options in order to not load any AML?
  • Is there any definitive way in MacOS to check which (if any) AML has been loaded? (I tried extracting DSDT with "MaciASL.app" but it did not match either of my AML files.)
I don't want to remove them from ACPI/patched, because, if for some reason, I can't boot MacOS, then it will be a pain trying to putt them back.

 

Thanks!

In your config.plist, set the name of an .aml file that doesn't exist, like dsdt456.aml. That way clover won't use any of the .aml files in ACPI/Patched.

 

If your system doesn't boot, you can change the .aml file name on Clover GUI for one file that does exists and works.

  • Like 1
Link to comment
Share on other sites
Dan ZG
Dan ZG
Posted
Posted

In your config.plist, set the name of an .aml file that doesn't exist, like dsdt456.aml. That way clover won't use any of the .aml files in ACPI/Patched.

 

If your system doesn't boot, you can change the .aml file name on Clover GUI for one file that does exists and works.

 

 

I tried that ... but it didn't work.

 

In `config.plist` I have:

 

<key>ACPI</key>...
  <key>DSDT</key>...
   <key>Name</key>
   <string>DSDT.aml</string>

 

In ACPI/patched I have:

 

    dsdt1.aml
    dsdt2.aml

 

Clover options shows ACPI DSDT name: `DSDT.aml` -- I left it as is.

 

And yet `bdmesg` *still* shows:

 

    Inserting dsdt1.aml from EFI\CLOVER\ACPI\patched ... Success
    Inserting dsdt2.aml from EFI\CLOVER\ACPI\patched ... Success
Link to comment
Share on other sites
Slice
Slice
Posted
Posted

I have some questions about DSDT (*.aml) loading in Clover. I've posted in a few places and haven't gotten definitive answers.

 

Say I have 2 (or more) .aml files within EFI/CLOVER/ACPI/patched -- say dsdt1.aml and dsdt2.aml.

I want to compare how they affect my machine; as well as NOT loading either of them.

So in config.plist I tried 'DSDT Name' set to null, i.e., there is no key/value.

But checking bdmesg it shows:

Inserting dsdt1.aml from EFI\CLOVER\ACPI\patched ... Success
Inserting dsdt2.aml from EFI\CLOVER\ACPI\patched ... Success

My questions:

  • Does "Inserting" mean they were both loaded? Or just recognized?
  • Do they have to be called DSDT or can they be called anything?
  • In Clover options /Acpi Patching, if I want to specify which to load, do I include .aml, or just dsdt1?
  • Can I specify a folder in Clover options or does the AML have to reside within /ACPI/patched?
  • If I want to NOT load ANY aml ... Do I need to actually remove them from ACPI/patched?
  • Can I create just an empty file called none.aml and use that in Clover options in order to not load any AML?
  • Is there any definitive way in MacOS to check which (if any) AML has been loaded? (I tried extracting DSDT with "MaciASL.app" but it did not match either of my AML files.)

I don't want to remove them from ACPI/patched, because, if for some reason, I can't boot MacOS, then it will be a pain trying to putt them back.

 

Thanks!

It looks like you have case-sensitive file system.

Clover intended to exclude all files with name DSDT* but it did not.

It is Clover bug and will be fixes asap.

Link to comment
Share on other sites
Haravikk
Haravikk
Posted
Posted

So I'm running the latest version of Clover, and it's working great except for one minor niggle; before Clover displays any icons, I get a bunch of what looks like debug/log text to my screen about all the different EFI entries it finds.

 

Now this would be fine if I were debugging, but booting is working just fine so I'd rather not see this, but I can't find any option anywhere in config.plist to disable it, as far as I can see I've turned off all log and all debug options.

 

To clarify; the entries I'm getting are specifically about EFI volumes that Clover finds, and occurs before I select a volume to boot up from, so this isn't anything to do with the -verbose flag for actual macOS booting (though I also have this disabled).

 

Is there some other option somewhere that I can disable?

Link to comment
Share on other sites
camillionario
camillionario
Posted
Posted

So I'm running the latest version of Clover, and it's working great except for one minor niggle; before Clover displays any icons, I get a bunch of what looks like debug/log text to my screen about all the different EFI entries it finds.

 

Now this would be fine if I were debugging, but booting is working just fine so I'd rather not see this, but I can't find any option anywhere in config.plist to disable it, as far as I can see I've turned off all log and all debug options.

 

To clarify; the entries I'm getting are specifically about EFI volumes that Clover finds, and occurs before I select a volume to boot up from, so this isn't anything to do with the -verbose flag for actual macOS booting (though I also have this disabled).

 

Is there some other option somewhere that I can disable?

Follow this  http://www.insanelymac.com/forum/topic/327584-apfsefi-without-verbose-boot/?hl=%20apfsefi

Link to comment
Share on other sites
Guest
Guest
Posted
Posted

Clover rev 4380

2 config.plist named config.plist and config-1.plist with inside different ACPI/DSDT/patches

I choose config-1.plist then check in ACPI/DSDT custom patches and I see patches of previous config.plist

in this condition on clover boot men I press return to go to the main boot menu then again I select ACPI/DSDT/custom patches and I see correct ones patches

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Clover rev 4380

2 config.plist named config.plist and config-1.plist with inside different ACPI/DSDT/patches

I choose config-1.plist then check in ACPI/DSDT custom patches and I see patches of previous config.plist

in this condition on clover boot men I press return to go to the main boot menu then again I select ACPI/DSDT/custom patches and I see correct ones patches

config-1.plist will be taken into account after return to main menu.

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

I have some questions about DSDT (*.aml) loading in Clover. I've posted in a few places and haven't gotten definitive answers.

 

Say I have 2 (or more) .aml files within EFI/CLOVER/ACPI/patched -- say dsdt1.aml and dsdt2.aml.

I want to compare how they affect my machine; as well as NOT loading either of them.

So in config.plist I tried 'DSDT Name' set to null, i.e., there is no key/value.

But checking bdmesg it shows:

Inserting dsdt1.aml from EFI\CLOVER\ACPI\patched ... Success
Inserting dsdt2.aml from EFI\CLOVER\ACPI\patched ... Success

My questions:

  • Does "Inserting" mean they were both loaded? Or just recognized?
  • Do they have to be called DSDT or can they be called anything?
  • In Clover options /Acpi Patching, if I want to specify which to load, do I include .aml, or just dsdt1?
  • Can I specify a folder in Clover options or does the AML have to reside within /ACPI/patched?
  • If I want to NOT load ANY aml ... Do I need to actually remove them from ACPI/patched?
  • Can I create just an empty file called none.aml and use that in Clover options in order to not load any AML?
  • Is there any definitive way in MacOS to check which (if any) AML has been loaded? (I tried extracting DSDT with "MaciASL.app" but it did not match either of my AML files.)

I don't want to remove them from ACPI/patched, because, if for some reason, I can't boot MacOS, then it will be a pain trying to putt them back.

 

Thanks!

The bug is fixed in 4391.

Anyway it is better to name files DSDT*.aml

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...