telepati Posted October 21, 2017 Share Posted October 21, 2017 Did this start happening at some point or never worked? Have you tried using the keyboard and mouse drivers? Do you have some sort of legacy fixes turned on in your firmware? Also, a lot of the time, instead of using CsmVideo driver, disable CSM all together to get native resolutions. That only works if you have an EFI capable graphics though. This is start suddenly. I am using Magic Mouse and Apple numeric keyboard these are working very well. I removed CSMdriver.efi also tried CSM on/off from BIOS nothing changed. I didnt touch any settings on clover config. Still cant do anyhing on clover screen. Edit: I also installed clover v4259 but nothing change I cant still select anything on Clover boot screen mouse and keyboard still unusable. Edit 2: I reset BIOS and everything back to the normal. Finally. Thank you all. Link to comment Share on other sites More sharing options...
scj312 Posted October 22, 2017 Share Posted October 22, 2017 Hello, using r4259 (legacy) from SF release; I sometime get this fluid UI on Kext Inject Management (but sometime it doesn't): Thanks I've noticed this as well, it seems to make the menu go very wide if I first access the main config menu before accessing the spacebar kext inject menu. I'm on r4243 (and EFI not legacy). 1 Link to comment Share on other sites More sharing options...
volc Posted October 22, 2017 Share Posted October 22, 2017 Considering the problem which I got before, Hello, can someone help me? I use certain trick in windows (https://mspoweruser.com/enable-precision-touchpad-drivers-non-precision-pc/), it works fine when using default windows bootloader, but when using clover the trackpad doesn't work well and it only works a quarter part of it. Any work around for this? Thanks Edit: I forgot uploading my config. Sorry for asking a stupid question, but does clover have any side effects to windows? Well the kext and ACPI patched don't affect the windows, but will the boot flags do? or maybe something? Considering the problem which I got like this bur Link to comment Share on other sites More sharing options...
Slice Posted October 23, 2017 Share Posted October 23, 2017 Boot flags probably do effect. This is a job for investigation if anyone knows what to do. Link to comment Share on other sites More sharing options...
Slice Posted October 23, 2017 Share Posted October 23, 2017 @WinstoneAce I moved our discussion to new tread http://www.insanelymac.com/forum/topic/328814-smc-keys-knowledge-database/ Link to comment Share on other sites More sharing options...
Slice Posted October 23, 2017 Share Posted October 23, 2017 New topic EFICheckDisabler 2 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted October 23, 2017 Share Posted October 23, 2017 I wanted to boot my Optiplex through UEFI. However, the os x partitions are not showing up then. Looking at the log, it seems that the drivers are not being loaded: ... 0:127 0:000 Hiding entries with string Herstel 0:127 0:000 Hiding entries with string Data 0:127 0:000 Hiding entries with string Windows 0:127 0:000 Hiding entries with string Preboot 0:127 0:000 === [ LoadDrivers ] ======================================= 0:127 0:000 === [ InitScreen ] ======================================== 0:127 0:000 SetMaxResolution: found best mode 8: 1920x1080 0:495 0:367 Video mode change to mode #8: Success ... Any idea why? Booting legacy works fine though: 2:729 0:000 Hiding entries with string Herstel 2:729 0:000 Hiding entries with string Data 2:729 0:000 Hiding entries with string Windows 2:729 0:000 Hiding entries with string Preboot 2:729 0:000 === [ LoadDrivers ] ======================================= 2:730 0:000 Loading AppleImageCodec-64.efi status=Success 2:731 0:000 Loading AppleUITheme-64.efi status=Success 2:731 0:000 Loading AppleKeyAggregator-64.efi status=Success 2:731 0:000 Loading FSInject-64.efi status=Success 2:732 0:000 Loading FirmwareVolume-64.efi status=Success 2:732 0:000 Loading SMCHelper-64.efi status=Success 2:732 0:000 Loading VBoxHfs-64.efi status=Success 2:734 0:002 - driver needs connecting 2:734 0:000 Loading apfs.efi status=Success 2:737 0:002 - driver needs connecting 2:737 0:000 2 drivers needs connecting ... 2:737 0:000 PlatformDriverOverrideProtocol->GetDriver overriden 2:737 0:000 APFS driver loaded 2:958 0:221 === [ InitScreen ] ======================================== Edit: Also, when booting in UEFI i'm not able to enter UEFI shell. Looks like it can't find Shell64U.efi Link to comment Share on other sites More sharing options...
smolderas Posted October 23, 2017 Share Posted October 23, 2017 I wanted to boot my Optiplex through UEFI. However, the os x partitions are not showing up then. Looking at the log, it seems that the drivers are not being loaded: ... 0:127 0:000 Hiding entries with string Herstel 0:127 0:000 Hiding entries with string Data 0:127 0:000 Hiding entries with string Windows 0:127 0:000 Hiding entries with string Preboot 0:127 0:000 === [ LoadDrivers ] ======================================= 0:127 0:000 === [ InitScreen ] ======================================== 0:127 0:000 SetMaxResolution: found best mode 8: 1920x1080 0:495 0:367 Video mode change to mode #8: Success ... Any idea why? Booting legacy works fine though: 2:729 0:000 Hiding entries with string Herstel 2:729 0:000 Hiding entries with string Data 2:729 0:000 Hiding entries with string Windows 2:729 0:000 Hiding entries with string Preboot 2:729 0:000 === [ LoadDrivers ] ======================================= 2:730 0:000 Loading AppleImageCodec-64.efi status=Success 2:731 0:000 Loading AppleUITheme-64.efi status=Success 2:731 0:000 Loading AppleKeyAggregator-64.efi status=Success 2:731 0:000 Loading FSInject-64.efi status=Success 2:732 0:000 Loading FirmwareVolume-64.efi status=Success 2:732 0:000 Loading SMCHelper-64.efi status=Success 2:732 0:000 Loading VBoxHfs-64.efi status=Success 2:734 0:002 - driver needs connecting 2:734 0:000 Loading apfs.efi status=Success 2:737 0:002 - driver needs connecting 2:737 0:000 2 drivers needs connecting ... 2:737 0:000 PlatformDriverOverrideProtocol->GetDriver overriden 2:737 0:000 APFS driver loaded 2:958 0:221 === [ InitScreen ] ======================================== Schermafbeelding 2017-10-23 om 20.54.30.png Edit: Also, when booting in UEFI i'm not able to enter UEFI shell. Looks like it can't find Shell64U.efi Maybe your mainboard have this "semi" UEFI (like mine) called hybrid efi, which is a half implementation of UEFI. So in return you would be booting in legacy mode. Edit: I have a ga-z68x-ud5-b3 Link to comment Share on other sites More sharing options...
Guest ricoc90 Posted October 23, 2017 Share Posted October 23, 2017 0:173 0:000 Default theme: embedded 0:173 0:000 Hiding entries with string Herstel 0:173 0:000 Hiding entries with string Data 0:173 0:000 Hiding entries with string Windows 0:173 0:000 Hiding entries with string Preboot 0:173 0:000 === [ LoadDrivers ] ======================================= 0:182 0:008 Loading APFS-64.EFI status=Success 0:244 0:062 - driver needs connecting 0:244 0:000 Loading OsxFatBinaryDrv-64.efi status=Success 0:253 0:008 Loading AppleImageCodec-64.efi status=Success 0:262 0:008 Loading AppleUITheme-64.efi status=Success 0:271 0:009 Loading DataHubDxe-64.efi status=Success 0:281 0:010 Loading AppleKeyAggregator-64.efi status=Success 0:290 0:008 Loading VBoxHfs-64.efi status=Success 0:299 0:009 - driver needs connecting 0:299 0:000 Loading FSInject-64.efi status=Success 0:308 0:008 Loading FirmwareVolume-64.efi status=Success 0:317 0:008 Loading SMCHelper-64.efi status=Success 0:325 0:008 Loading PartitionDxe-64.efi status=Success 0:334 0:008 - driver needs connecting 0:334 0:000 Loading Fat-64.efi status=Success 0:343 0:009 - driver needs connecting 0:343 0:000 Loading EmuVariableUefi-64.efi status=Success 0:352 0:008 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success 0:352 0:000 Loading OsxAptioFixDrv-64.efi status=Success 0:361 0:008 4 drivers needs connecting ... 0:361 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:361 0:000 Partition driver loaded: 0:361 0:000 APFS driver loaded 0:361 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:899 0:537 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 0:920 0:021 === [ InitScreen ] ======================================== 0:920 0:000 SetMaxResolution: found best mode 8: 1920x1080 Maybe your mainboard have this "semi" UEFI (like mine) called hybrid efi, which is a half implementation of UEFI. So in return you would be booting in legacy mode. Edit: I have a ga-z68x-ud5-b3 Don't think so, I booted in UEFI before w/o issues. Looks like Clover is skipping the entire EFI folder as it looks like to me: 0:601 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F06DA778-D2F8-4331-A013-BBDDE9104513,0x28,0x64000) 0:602 0:000 Result of bootcode detection: bootable unknown (legacy) 0:609 0:007 This is SelfVolume !! ... 0:653 0:000 Checking volume "EFI" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,F06DA778-D2F8-4331-A013-BBDDE9104513,0x28,0x64000)) ... skipped EDIT: Clover on a fat32 formatted USB boots fine in UEFI: 0:173 0:000 Default theme: embedded 0:173 0:000 Hiding entries with string Herstel 0:173 0:000 Hiding entries with string Data 0:173 0:000 Hiding entries with string Windows 0:173 0:000 Hiding entries with string Preboot 0:173 0:000 === [ LoadDrivers ] ======================================= 0:182 0:008 Loading APFS-64.EFI status=Success 0:244 0:062 - driver needs connecting 0:244 0:000 Loading OsxFatBinaryDrv-64.efi status=Success 0:253 0:008 Loading AppleImageCodec-64.efi status=Success 0:262 0:008 Loading AppleUITheme-64.efi status=Success 0:271 0:009 Loading DataHubDxe-64.efi status=Success 0:281 0:010 Loading AppleKeyAggregator-64.efi status=Success 0:290 0:008 Loading VBoxHfs-64.efi status=Success 0:299 0:009 - driver needs connecting 0:299 0:000 Loading FSInject-64.efi status=Success 0:308 0:008 Loading FirmwareVolume-64.efi status=Success 0:317 0:008 Loading SMCHelper-64.efi status=Success 0:325 0:008 Loading PartitionDxe-64.efi status=Success 0:334 0:008 - driver needs connecting 0:334 0:000 Loading Fat-64.efi status=Success 0:343 0:009 - driver needs connecting 0:343 0:000 Loading EmuVariableUefi-64.efi status=Success 0:352 0:008 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success 0:352 0:000 Loading OsxAptioFixDrv-64.efi status=Success 0:361 0:008 4 drivers needs connecting ... 0:361 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:361 0:000 Partition driver loaded: 0:361 0:000 APFS driver loaded 0:361 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:899 0:537 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 0:920 0:021 === [ InitScreen ] ======================================== 0:920 0:000 SetMaxResolution: found best mode 8: 1920x1080 So the issue is - my Clover install or - my BIOS Maybe it's worth mentioning that with older Clover versions, I wasn't able to boot UEFI from the EFI partition AT ALL, it'd make the BIOS freeze. Actually I wasn't even able to navigate the EFI partition, BIOS GUI would malform. EDIT2: Nevermind. It's fixed now. Re-installing Clover didn't work, reformatting the EFI partition did. I still don't now what the issue was, but it's working now. Link to comment Share on other sites More sharing options...
Ramalama Posted October 23, 2017 Share Posted October 23, 2017 @slice Do Clover injects default a FakeCPUID for Skylake-X ? Because its strange. If i remove FakeCPUID from Clover Config, im still able to boot... If i use my Original CPUID as FakeCPUID, i cant boot (0x050654)... So thats why i think, that Clover injects a FakeCPUID, if i doesnt specify one in the Config... Cheers :-) 1 Link to comment Share on other sites More sharing options...
Slice Posted October 24, 2017 Share Posted October 24, 2017 @slice Do Clover injects default a FakeCPUID for Skylake-X ? Because its strange. If i remove FakeCPUID from Clover Config, im still able to boot... If i use my Original CPUID as FakeCPUID, i cant boot (0x050654)... So thats why i think, that Clover injects a FakeCPUID, if i doesnt specify one in the Config... Cheers :-) I didn't make default FakeCPUID. But I may propose that if it removed then nothing to patch. If you set some FakeCPUID then the patch will occured and it is not good. What is your system version? Upload, please, your kernel to check if the patch may work. Link to comment Share on other sites More sharing options...
fusion71au Posted October 24, 2017 Share Posted October 24, 2017 Hi Slice, I get a red screen error on my legacy desktop GAP55aUd3/Intel i5-750/ATI HD 5770 with officially released Clover >r4060: Clover 4061 red screen.JPG Seems that commit r4061 causes the regression - in rEFIt_UEFI/refit.inf + XCODE:*_*_*_CC_FLAGS = -fsigned-char -O2 -fno-common The system makes it to the Clover GUI but red screens when applying Clover DSDT fixes, attempting to boot OS X (see attached debug log for r4061). My system boots fine if I use Clover compiled without the -fno-common flag for Xcode - eg see attached boot log with r4097. @Slice, Any reason why official Clover builds from SourceForge still use -fno-common for XCODE compilation, as I reported in the Clover bug thread a few months ago ---> red screen error on certain BIOS? Also @Rehabman's fork of Clover r4264 has fixed this bug reported by @MakAsus in post#14840: "If I choose kext injection control in Clover Gui, go to the folder "other", and do not change anything there, just exit this folder and injection control menu, then try to boot from selected disk, boot fails." The InjectKexts set to Detect works + you can also boot OS X with/without injected kexts (in addition to individual kext blocking) in his version... Clover_v2.4k_r4264.RM-4339.750c5fff.pkg.zip 1 Link to comment Share on other sites More sharing options...
RehabMan Posted October 24, 2017 Share Posted October 24, 2017 @Slice, Any reason why official Clover builds from SourceForge still use -fno-common for XCODE compilation, as I reported in the Clover bug thread a few months ago ---> red screen error on certain BIOS? Also @Rehabman's fork of Clover r4264 has fixed this bug reported by @MakAsus in post#14840: "If I choose kext injection control in Clover Gui, go to the folder "other", and do not change anything there, just exit this folder and injection control menu, then try to boot from selected disk, boot fails." The InjectKexts set to Detect works + you can also boot OS X with/without injected kexts (in addition to individual kext blocking) in his version... screenshot0.png screenshot1.png screenshot2.png There are quite a few fixes/features I have been working on. Full disclosure in the README: https://github.com/RehabMan/Clover/blob/master/README.md I will be making a proposal in the "Clover Bug/Issue Report and Patch" thread when I'm ready (relatively soon). Good to see someone is building/testing besides me and the few I know of. 6 Link to comment Share on other sites More sharing options...
Slice Posted October 24, 2017 Share Posted October 24, 2017 Also @Rehabman's fork of Clover r4264 has fixed this bug reported by @MakAsus in post#14840: "If I choose kext injection control in Clover Gui, go to the folder "other", and do not change anything there, just exit this folder and injection control menu, then try to boot from selected disk, boot fails." This is resolved in official Clover. About -fno-common. There was a serios reason provided by other developers. I can't accept a patch without reasonable explanation. One want this second want another. I will choose? 4 Link to comment Share on other sites More sharing options...
Matgen84 Posted October 24, 2017 Share Posted October 24, 2017 @Sherlock Here they are preboot.log.zip 1 Link to comment Share on other sites More sharing options...
Sherlocks Posted October 24, 2017 Share Posted October 24, 2017 @Sherlock Here they are great. ivy bridge intel gfx auto-detection done both desktop and laptop. thank you for report. 4 Link to comment Share on other sites More sharing options...
fusion71au Posted October 24, 2017 Share Posted October 24, 2017 About -fno-common. There was a serios reason provided by other developers. I can't accept a patch without reasonable explanation. One want this second want another. I will choose? I think @apianti provided a good reason for not using it ... This is not a good flag because in EFI binaries the rdata section is combined with the text section, that is needed. I believe this places the variables in the data section and that the -fcommon flag should be being used instead (it is the default, but not on all platforms). All the official Clover versions before r4061 did not use the flag and worked for me. Only "advantage" I can see is that using the flag results in a 1-2KB smaller compiled binary CLOVERX64.efi. Clover without the flag boots my other systems without issue. Newbs who can't compile their own Clover and have similar hardware to my 5 series GA-P55aUD3 won't be able to boot with Clover's auto dsdt patching, using officially released Clover eg @fallen00sniper post#3: "fixusb_1000 causes a black screen with red text for me" 1 Link to comment Share on other sites More sharing options...
Slice Posted October 25, 2017 Share Posted October 25, 2017 OK, let it be -fcommon (rev 4265) What toolset did you use Xcode5 or Xcode8? 2 Link to comment Share on other sites More sharing options...
fusion71au Posted October 25, 2017 Share Posted October 25, 2017 @Slice, I normally use XCODE5 toolchain setting when compiling from official SVN repo but XCODE8 toolchain also works (XCODE 9.0.1 installed in 10.13.x or 10.12.6). Building from @rehabman's GIT repo needs XCODE8 setting. Link to comment Share on other sites More sharing options...
thbluebird Posted October 25, 2017 Share Posted October 25, 2017 Greetings, I've really enjoyed working with OS X ( OS: 10.11.5 ) on my laptop " Acer Aspire E5-574G-54Y2" The Clover Bootloader ( Clover revision: 3544 ) is Awesome, as well as the contributors that have made it possible. I'm able to boot and work, but I'm experiencing random boots and I have my NVIDIA graphic device listed, and showing to be working as a 3D accelerator (with 0 MB VRAM size ), but I have not been able to boot/use it as the primary graphics device ( I’ve tried several solutions listed for my NVIDIA 940M, but no luck, I still boot into a black screen- I can hear error sounds made from typing keys- like the system has properly booted, but just has a black screen. One thing I found odd, the Intel Graphics Card that is used ( Intel® HD Graphics 520 (Skylake GT2) is showing that there is no kext loaded for the device. The audio is working quite well. It appears to be setup correctly. The ACPI/DSDT files were found in ESP/EFI/CLOVER/ACPI/origin. The video ROMS were found in ESP/EFI/CLOVER/ROM/ I am hoping someone can help me with the proper setup, config, DSDT, etc. I have attached some files and would be happy to provide some more details/files if needed. Thanks a bunch in advance for all the hard work and contributions! Sincerely, iMAC 14,2 setup files.zip Link to comment Share on other sites More sharing options...
rotoyouoio Posted October 25, 2017 Share Posted October 25, 2017 i've wasted a {censored}load of of time to test EVERY component by replacing it, so please don't tell me that mine is faulty, or to try other efi modules, or to lower the bios settings or any other obvious first steps. really frustrated with this. on asus (quite possibly other vendors are affected too) x299 motherboards there is an issue of memory allocation errors with uefi boot. i can only but certainly reproduce the problem when a usb3 storage device is attached, others have reported that no matter what the usb generation is. memcheck within os is a witness of this problem, and every time the occupied address ends in ***d30 this corrupted operation affects not only memcheck, but every operation possible. a more obvious way to produce evidence for the non believers is to render an hour or two of RED camera files to a compressed codec onto an external storage device and see the result is corrupted i'm rather tired of proving that this is an actual error and not memtest being outdated. memtest is only a tool to witness this, not to test the memory this obviously does not happen with legacy boot quite possible this is a problem on other aptiov5 capsules and even more possible that future platforms will posses this problem too to my limited understanding (it might be wrong) this effect is an evolution of memory allocation problems that people encountered on x99 platforms with aptiov5 capsules and hence aptiofix related. but back in the day this occured only before kernel loading. and i've seen somewhere, that dmazar refused to revisit aptiofix stating that it's too much time to do this from scratch. Link to comment Share on other sites More sharing options...
SavageAUS Posted October 25, 2017 Share Posted October 25, 2017 Greetings, I've really enjoyed working with OS X ( OS: 10.11.5 ) on my laptop " Acer Aspire E5-574G-54Y2" The Clover Bootloader ( Clover revision: 3544 ) is Awesome, as well as the contributors that have made it possible. I'm able to boot and work, but I'm experiencing random boots and I have my NVIDIA graphic device listed, and showing to be working as a 3D accelerator (with 0 MB VRAM size ), but I have not been able to boot/use it as the primary graphics device ( I’ve tried several solutions listed for my NVIDIA 940M, but no luck, I still boot into a black screen- I can hear error sounds made from typing keys- like the system has properly booted, but just has a black screen. One thing I found odd, the Intel Graphics Card that is used ( Intel® HD Graphics 520 (Skylake GT2) is showing that there is no kext loaded for the device. The audio is working quite well. It appears to be setup correctly. The ACPI/DSDT files were found in ESP/EFI/CLOVER/ACPI/origin. The video ROMS were found in ESP/EFI/CLOVER/ROM/ I am hoping someone can help me with the proper setup, config, DSDT, etc. I have attached some files and would be happy to provide some more details/files if needed. Thanks a bunch in advance for all the hard work and contributions! Sincerely, You have so many parches in kextstopatch section enabled its hard to tell what device your trying to patch, that needs to be cleaned up. You are also using an old bios version. Please add system specs to signature and open a topic in the relevant section as this doesn't seem clover related. Also when you create a new topic in the proper section, please upload clover folder minus themes and remove serial number, mlb etc from config.plist. Link to comment Share on other sites More sharing options...
mhaeuser Posted October 25, 2017 Share Posted October 25, 2017 @rotoyouoio Sorry, can't quite follow what you are talking about... Usually people speak of 'memory allocation errors' in regards to early boot, where boot.efi might not get the memory it wants. If you meant that, how can you boot into the OS? And if it's not that, how is it related to Clover and how did you conclude it was an alloc and not a mapping or MMIO error? EDIT: Somehow skipped the last paragraph. What you are facing is NOT a memory alloc error, because otherwise the kernel would not end up in mem. It might be a mapping error somehow caused by Aptio or even AptioFix. Dump a memmap and find out which address is faulty in that very boot cycle, its type may be relevant. 2 Link to comment Share on other sites More sharing options...
rotoyouoio Posted October 25, 2017 Share Posted October 25, 2017 @rotoyouoio Sorry, can't quite follow what you are talking about... Usually people speak of 'memory allocation errors' in regards to early boot, where boot.efi might not get the memory it wants. If you meant that, how can you boot into the OS? And if it's not that, how is it related to Clover and how did you conclude it was an alloc and not a mapping or MMIO error? EDIT: Somehow skipped the last paragraph. What you are facing is NOT a memory alloc error, because otherwise the kernel would not end up in mem. It might be a mapping error somehow caused by Aptio or even AptioFix. Dump a memmap and find out which address is faulty in that very boot cycle, its type may be relevant. will do, but the address is non constant, though it always ends in ***d30 and i maybe naming it wrong, forgive me, trying the best i can. and the error does not prevent booting. the system is operational the last phase of troubleshooting i did before confirming it with others looked like this: strip the mobo from everything, attach components one by one. attach usb3 internal cardreader, get errors. disconnect it. have a hunch the problem is more generic. boot into system. get pass the stuck address test. stop. attach a usb3 hardrive. start testing. errors. disconnect it. start testing. no errors. so the problem is rather dynamic. and completely absent during legacy boot. and i need point out once again, that it affects everything, not only the outdated memtest. will update once i dump Link to comment Share on other sites More sharing options...
arabesc Posted October 25, 2017 Share Posted October 25, 2017 I can't make Clover to boot from a select the last booted volume, I mean the DefaultVolume/LastBootedVolume option. It almost always selects the same volume. According to the guide it's necessary to remove the EmuVariableUefi-64.efi module, but I can't remove it because it's required for Nvidia Web Driver. The guide on Nvidia Web Driver mentions that module, and I can confirm that my system is unbootable without EmuVariableUefi-64.efi. Is there a solution to this issue? Here is the Boot section from my config: <key>Boot</key> <dict> <key>Arguments</key> <string>dart=0 darkwake=1 -shikigva</string> <key>CustomLogo</key> <string>Alternate</string> <key>Debug</key> <false/> <key>DefaultVolume</key> <string>LastBootedVolume</string> <key>Legacy</key> <string>PBR</string> <key>Log</key> <false/> <key>Secure</key> <false/> <key>Timeout</key> <integer>-1</integer> <key>XMPDetection</key> <string>Yes</string> </dict> Could someone help me on the issue, please? Link to comment Share on other sites More sharing options...
Recommended Posts