Jump to content

Clover General discussion


ErmaC
30,171 posts in this topic

Recommended Posts

That seems to fix the CMOS error, thanks!

Ok after extensive testing, the error has happened 1 in like 20 times.

I am running Clover r3994 with your fix and it definitely improved (before i had the error 2 of every 3 boots +- )

This is a Lenovo Thinkpad L420 with Clover in the ESP of my only hard drive with GUID and boot0ss )

 

This computer does not have UEFI. I wonder if that may be the issue and Clover or Mac OS X make my BIOS not like the GUID partition system, should I maybe try and have Clover in a 300 mb partition in a MBR scheme??

Link to comment
Share on other sites

Ordinary BIOS doesn't see if HDD formatted as MBR or as GPT or as other map.

It boots from device. HD, CD, USB-HDD or Floppy... no matter if it has GUID or no.

 

If you install legacy Clover to GPT HDD then

boot0af into master boot record,

boot1f32 into first sector of ESP which is FAT32 formatted,

no active partitions,

boot6 rename to boot and write into ESP

EFI folder write into ESP.

That's all!


 

 

EDIT: @Slice What is the Type of the region that is supposed to be converted?

BS_Code    0000000000060000-000000000009EFFF 000000000000003F 000000000000000F
  • Like 2
Link to comment
Share on other sites

3998 seems to boot really fast compared to other recent versions!

 

I have noticed that my Audio changes to the Headphones output sometimes on a reboot, is this more of an AppleALC issue or could Clover influence it?

Try r3998 fix file above.

We can notice problem about clover or applealc

 

나의 LG-F410S 의 Tapatalk에서 보냄

  • Like 1
Link to comment
Share on other sites

Hello everyone using EmuVariableUefi-64.efi

 

i want to test rc script.

 

sometimes tluck script shown fail case. 

http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=2361248

 

FrodoKenny and syscl's script are no problem for me. their script always success 100%. 

but there are no features(tluck script has legacy, some features) in their script.

so, i did combine their's script and improve visual log in terminal. i did hard test nvram for searching fail case. no problem now in 1.8

 

 

Last login: Fri Feb  3 16:21:29 on console

Supreme-MBP:~ supreme$ sudo cat /Library/Logs/CloverEFI/rc.shutdown.log

Password:

v1.8 © 2017 syscl/lighting/Yating Zhou

Found ESP on disk0s1

Found Clover in /Volumes/ESP01/EFI/CLOVER

Target path: /Volumes/ESP01 - saved new values to NVRAM

>> End Script: /private/etc/rc.shutdown.d/80.save_nvram_plist.local

 

Supreme-MBP:~ supreme$ sudo /etc/rc.shutdown.d/80.save_nvram_plist.local

Supreme-MBP:~ supreme$ sudo cat /Library/Logs/CloverEFI/rc.shutdown.log

v1.8 © 2017 syscl/lighting/Yating Zhou

Found ESP on disk0s1

Found Clover in /Volumes/ESP01/EFI/CLOVER

Target path: /Volumes/ESP01 - saved new values to NVRAM

Supreme-MBP:~ supreme$ sudo /etc/rc.shutdown.d/80.save_nvram_plist.local

Supreme-MBP:~ supreme$ sudo cat /Library/Logs/CloverEFI/rc.shutdown.log

v1.8 © 2017 syscl/lighting/Yating Zhou

Found ESP on disk0s1

Device mount error umount(/Volumes/ESP01): Resource busy -- try 'diskutil unmount'

Now use umount -f to release it

Found Clover in /Volumes/ESP01/EFI/CLOVER

Target path: /Volumes/ESP01 - no change in NVRAM

Supreme-MBP:~ supreme$ 

 

please test and report.

 

thanks in advance

80.save_nvram_plist.local-Sherlocks.zip

  • Like 2
Link to comment
Share on other sites

I'm stuck in a boot loop - after updating to latest Clover 3998 and trying Sherlock's fix.

 

Then I downgraded to 3994 + Sherlock's fix and now 3974.

 

I've also deleted nvram.plist and reset nvram via Terminal.

 

The machine (see my Sig for specs) will boot from a Clover boot usb running v2953.

 

Note: the machine has 2 bootable SSD's runing macOS 10.2 using Clover and 2 HDD's - 1 for storage and the other running Win 10.

 

Attached Clover debug.log

 

 

debug.log.zip

Link to comment
Share on other sites

I'm stuck in a boot loop - after updating to latest Clover 3998 and trying Sherlock's fix.

 

Then I downgraded to 3994 + Sherlock's fix and now 3974.

 

I've also deleted nvram.plist and reset nvram via Terminal.

 

The machine (see my Sig for specs) will boot from a Clover boot usb running v2953.

 

Note: the machine has 2 bootable SSD's runing macOS 10.2 using Clover and 2 HDD's - 1 for storage and the other running Win 10.

 

Attached Clover debug.log

Did you try r3998 fix file above?

http://www.insanelymac.com/forum/index.php?/topic/284656-Clover-General-discussion&do=findComment&comment=2361623

 

If you didnt test, please test and report

 

나의 LG-F410S 의 Tapatalk에서 보냄

Link to comment
Share on other sites

Yes, I tried 3998 + fix - but didn't work.

 

Have just downgraded to v3882 - will reboot and test.

 

Should I delete nvram.plist from EFI?

 

Edit: downgrading to 3882 didn't help.

You use very old version clover.

3998 official build can't boot?

Please tell me that can boot clover version and your mac version.

 

Also attach config.plist except smbios part and MLB/ROM

 

add,

i see your log

 

18:417  0:035  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10

18:430  0:012    Extra kext: EFI\CLOVER\kexts\10.10\AppleACPIPS2Nub.kext
18:452  0:022    Extra kext: EFI\CLOVER\kexts\10.10\ApplePS2Controller.kext
18:479  0:026      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\ApplePS2Controller.kext\Contents\PlugIns\ApplePS2Keyboard.kext
18:504  0:025      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\ApplePS2Controller.kext\Contents\PlugIns\ApplePS2Mouse.kext
18:536  0:032      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\ApplePS2Controller.kext\Contents\PlugIns\ApplePS2Trackpad.kext
18:556  0:019    Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext
18:576  0:020    Extra kext: EFI\CLOVER\kexts\10.10\lspcidrv.kext
18:593  0:016    Extra kext: EFI\CLOVER\kexts\10.10\NullCPUPowerManagement.kext
18:609  0:016    Extra kext: EFI\CLOVER\kexts\10.10\Patched_10.7_AppleRTC.kext

 

do you use yosemite? i see your sig, you wrote osx10.12.3

 

also 

 

3:575  0:000  Clover revision: 2953  running on Precision WorkStation T3500 

3:575  0:000  ... with board 09KPNV
3:575  0:000  Clover load options size = 0 bytes

 

it's very old

 

나의 LG-F410S 의 Tapatalk에서 보냄

Link to comment
Share on other sites

ok - here it is, deleted smbios and MLB/ROM.


You use very old version clover.
3998 official build can't boot?
Please tell me that can boot clover version and your mac version.

Also attach config.plist except smbios part and MLB/ROM

 

add,

i see your log

 

do you use yosemite? i see your sig, you wrote osx10.12.3

 

also 

 

it's very old

 

나의 LG-F410S 의 Tapatalk에서 보냄

Yes, the hardware is old but still good :)

 

I'm using an old usb stick that was a Yosemite installer to boot the machine because the EFI bootloader (Clover 3998) is broken.

config.plist.zip

Link to comment
Share on other sites

ok - here it is, deleted smbios and MLB/ROM.

 

wrong config.plist file.

 

you have to recreate config.plist from Clover Configurator or Clover Cloud Editor for your desktop.

 

you place kexts in 10.12 folder from kexts  in 10.11 folder on ESP partition.

 

i can't help it in detail. because i don't have your desktop. also can't help in clover thread.

 

r3998 is no problem about boot and basic features. just some users reported that some parts aren't working(RTC, etc) in kext_inject.c.

Link to comment
Share on other sites

Sorry - not sure what you mean - it is the config.plist from my main SSD 'Intrepid'.

 

Becuase it's not booting after latest clover update - I have to boot with a Yosemite installer usb that I made a while ago.

 

I recreated the confg.plist from Clover Configurator - and made sure it was from the correct EFI partition.

 

Thanks for all your help :)

config.plist.zip

Link to comment
Share on other sites

ok - here it is, deleted smbios and MLB/ROM.

Yes, the hardware is old but still good :)

 

I'm using an old usb stick that was a Yosemite installer to boot the machine because the EFI bootloader (Clover 3998) is broken.

 

i know. your hardware is no problem. you have to recreate config.plist for latest clover bootloader.

 

The difference between your bootloader version and the latest clover bootloader version is almost r1000 different.

Sorry - not sure what you mean - it is the config.plist from my main SSD 'Intrepid'.

 

Becuase it's not booting after latest clover update - I have to boot with a Yosemite installer usb that I made a while ago.

 

I recreated the confg.plist from Clover Configurator - and made sure it was from the correct EFI partition.

 

Thanks for all your help :)

 

i see your config.plist.

i first see "_NOT_SHOWN_"

 

You should test the Sierra boot yourself. Whether to boot or not. There is nothing I can help you with.

 

Again, Clover has no problem. It's a problem with your settings.

  • Like 2
Link to comment
Share on other sites

3998 seems to boot really fast compared to other recent versions!

 

I have noticed that my Audio changes to the Headphones output sometimes on a reboot, is this more of an AppleALC issue or could Clover influence it?

 

I also have this problem. I wonder if something changed in macOS after version 10.12.1, in that did not have it.

 
Since 10.12.2 with this problem always on a reboot, the setting goes back to "headphones" even putting in "internal speakers".
I use "AppleALC" in the latest version.
  • Like 2
Link to comment
Share on other sites

×
×
  • Create New...