Clover General discussion

Micky1979 · August 28, 2016

Yep, what I've tried to say. Here no kernel panics from a long time( :lol: ) so I cannot say for sure, seem like your is not a kp.

maleorderbride · August 28, 2016

Got it--thanks. If only it was, it would be easier to track down ;p

Needy · September 2, 2016

Hi Slice, I would like to know if it is a normal behaviour that I have these flags set when in my config.plist I have not configured with this flags?

Clover version is 3716 My cpu is a Broadwell EP Xeon 2696 v4

Edit same behaviour with clover 3726

Hello there,

I hope you don't mind if I will answer to your question.

The default value for the GeneratePS/CS states and EnableC6 options are set to true when the CPU Model is equal or bigger than Ivy Bridge and nothing is set in the config.plist file.

if (gCPUStructure.Model >= CPU_MODEL_IVY_BRIDGE) {
    gSettings.GeneratePStates    = TRUE;
    gSettings.GenerateCStates    = TRUE;
    //  gSettings.EnableISS          = FALSE;
    //  gSettings.EnableC2           = TRUE;
    gSettings.EnableC6           = TRUE;
    gSettings.PluginType         = 1;

    if (gCPUStructure.Model == CPU_MODEL_IVY_BRIDGE) {
      gSettings.MinMultiplier    = 7;
    }
    //  gSettings.DoubleFirstState   = FALSE;
    gSettings.DropSSDT           = TRUE;
    gSettings.C3Latency          = 0x00FA;
  }

The Broadwell EP does not exist in the CPU model definition but I suppose it's recognised as different Broadwell Model which has a higher hex value than the Ivy Bridge model.

Best regards.

Needy · September 2, 2016

Hi Needy

No, I don't mind and I am grateful for your answer

I am using a FakeCpuid to boot as advised by pikeralpha, but a this moment I can't resolve this error message X86PlatformShim::start - Failed to send stepper and it seems that I have generated other PM ssdt other than one I would like to use present in clover/acpi/patched folder

I'm not familiar with that error.

Set the mentioned options to false in the config.plist file, remove the bad SSDT tables, generate new good ones and put them in the directory you mentioned.

Best of luck.

Needy · September 3, 2016

@ Needy

Hi

Is it possible to set in SMBios System-Type parameters?

I remember something like:

<key>Server</key>

<true/>

but it does not work in Smbios secton

Thank you

I don't think there's such an option.

However, clover automatically detects if it's a regular or a server version of MacOS.

CHAR16* SystemPlists[] = { L"\\System\\Library\\CoreServices\\SystemVersion.plist", // OS X Regular
  L"\\System\\Library\\CoreServices\\ServerVersion.plist", // OS X Server
  NULL };

if (OSTYPE_IS_OSX(Entry->LoaderType)) {
    // Detect exact version for Mac OS X Regular/Server
    i = 0;
    while (SystemPlists[i] != NULL && !FileExists(Entry->Volume->RootDir, SystemPlists[i])) {
      i++;
    }

    if (SystemPlists[i] != NULL) { // found OSX System
      Status = egLoadFile (Entry->Volume->RootDir, SystemPlists[i], (UINT8 **)&PlistBuffer, &PlistLen);
      if (!EFI_ERROR (Status) && PlistBuffer != NULL && ParseXML (PlistBuffer, &Dict, 0) == EFI_SUCCESS) {
        Prop = GetProperty (Dict, "ProductVersion");
        if (Prop != NULL && Prop->string != NULL && Prop->string[0] != '\0') {
          OSVersion = AllocateCopyPool (AsciiStrSize (Prop->string), Prop->string);
        }
        Prop = GetProperty (Dict, "ProductBuildVersion");
        if (Prop != NULL && Prop->string != NULL && Prop->string[0] != '\0') {
          Entry->BuildVersion = AllocateCopyPool (AsciiStrSize (Prop->string), Prop->string);
        }
      }
    }
  }

Below is a sample of the config.plist file with every option that's possible.

Best regards.

config-sample.plist.zip

fusion71au · September 6, 2016

I get the same screen after selecting to boot OSX using a config.plist with Clover DSDT autopatching enabled....
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Fixes</key>
			<dict>
				<key>AddDTGP_0001</key>
				<true/>
				<key>FixAirport_4000</key>
				<true/>
				<key>FixDarwin_0002</key>
				<true/>
				<key>FixDisplay_0100</key>
				<true/>
				<key>FixHDA_8000</key>
				<true/>
				<key>FixHPET_0010</key>
				<true/>
				<key>FixIPIC_0040</key>
				<true/>
				<key>FixLAN_2000</key>
				<true/>
				<key>FixSATA_0400</key>
				<true/>
				<key>FixShutdown_0004</key>
				<true/>
				<key>FixUSB_1000</key>
				<true/>
			</dict>
			<key>ReuseFFFF</key>
			<false/>
		</dict>
Details of System

System Desktop GA P55aUD3/Intel i5-750/ATI HD5770

Clover legacy boot r3561. Same problem if I replace CLOVERX64.efi with older revision r3469. However r3368 and older (r3259) boot successfully. Clover r3561 also boots successfully on the system if I use a manually patched DSDT in /ACPI/patched

Note the third stage "boot" file was boot6 from r3561 in all tests above.

If I change the "boot file" to boot6 from r3368, I get a hanging blank screen instead of a screen with orange text.

Debug log from unsuccessful boot with CLOVERX64.efi_r3561 attached.

Same issue persists with r3566 using config.plist with Clover DSDT autopatching enabled....boots OK using config.plist with only manually patched DSDT.

The "X64 Exception Type" error when using Clover's DSDT auto-patching on my system was eliminated by using CloverX64 compiled with gcc49 instead of xcode (like official build)...

0:100 0:100 MemLog inited, TSC freq: 2664769197

0:100 0:000 LegacyRegion2: Chipset/proc: 0xD1318086

0:100 0:000 Core i7 processors (PAM 0x40-0x47)

0:100 0:000 Test PAM1=(0x41=11, 0x5a=00, 0x81=0D, 0x91=11) at chipset D1318086

0:100 0:000 , Install = Success

0:112 0:012 BiosVideoDriverBindingStart!

0:112 0:000 BiosVideoCheckForVbe

0:112 0:000 EdidOverride not found

0:145 0:033 Edid1+

0:145 0:000 found Detail Timing 1920x1200

0:178 0:033 Edid0+

0:178 0:000 found Detail Timing 1920x1200

0:178 0:000 ... already present

0:186 0:007 0 1152x864 attr=BB - ok, edid+, working, highest, pref=0

0:186 0:000 1 1280x960 attr=BB - ok, edid-

0:187 0:000 2 640x480 attr=BB - ok, edid+, 640x480, working

0:187 0:000 3 800x600 attr=BB - ok, edid+, 800x600, working

0:187 0:000 4 1024x768 attr=BB - ok, edid+, 1024x768, working

0:187 0:000 5 1280x1024 attr=BB - ok, edid+, working, highest, pref=5

0:189 0:001 6 1400x1050 attr=BB - ok, edid-

0:190 0:001 7 1600x1200 attr=BB - ok, edid+, working, highest, pref=7

0:194 0:004 BV new mode: 7 1600x1200

0:423 0:228 SetMode pref 7 (7) = Success

0:692 0:269 Found supported controller for BiosBlockIO class=010601

0:692 0:000 Int13Extensions: INT 13 41 DL=80 : CF=0 BX=AA55 CX=0005

0:692 0:000 GetDriveParameters: INT 13 48 DL=80 : CF=0 AH=00

0:692 0:000 BlockSize = 512 LastBlock = 234441647

0:693 0:000 Int13Extensions: INT 13 41 DL=81 : CF=0 BX=AA55 CX=0005

0:693 0:000 GetDriveParameters: INT 13 48 DL=81 : CF=0 AH=00

0:693 0:000 BlockSize = 512 LastBlock = -387938129

1:265 0:572

1:265 0:000 Now is 6.9.2016, 10:57:53 (GMT)

1:265 0:000 Starting Clover revision: 3728 on CLOVER EFI

1:265 0:000 Build with: [Args: ./ebuild.sh -gcc49 -D USE_APPLE_HFSPLUS_DRIVER -D DISABLE_USB_SUPPORT --x64-mcp | Command: build -D USE_APPLE_HFSPLUS_DRIVER -D DISABLE_USB_SUPPORT -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -p Clover/Clover.dsc -a X64 -b RELEASE -t GCC49 -n 5 | OS: 10.10.5]

1:265 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(1,GPT,1B386756-0922-4B96-BD59-1FC3B79E189E,0x800,0x64000) @DDD58118

1:265 0:000 SelfDirPath = \EFI\CLOVER

1:265 0:000 === [ Get Smbios ] ========================================

1:265 0:000 Total Memory Slots Count = 4

1:265 0:000 Type 17 Index = 0

1:265 0:000 SmbiosTable.Type17->Speed = 1333MHz

1:265 0:000 SmbiosTable.Type17->Size = 2048MB

1:265 0:000 SmbiosTable.Type17->Bank/Device = Bank0/1 A0

1:265 0:000 SmbiosTable.Type17->Vendor =

1:265 0:000 SmbiosTable.Type17->SerialNumber =

1:265 0:000 SmbiosTable.Type17->PartNumber =

1:265 0:000 Type 17 Index = 1

1:265 0:000 Ignoring insane frequency value 0MHz

1:265 0:000 SmbiosTable.Type17->Speed = 0MHz

1:265 0:000 SmbiosTable.Type17->Size = 0MB

1:265 0:000 SmbiosTable.Type17->Bank/Device = Bank2/3 A1

1:265 0:000 SmbiosTable.Type17->Vendor = <null string>

1:265 0:000 SmbiosTable.Type17->SerialNumber = <null string>

1:265 0:000 SmbiosTable.Type17->PartNumber = <null string>

1:265 0:000 Type 17 Index = 2

1:265 0:000 SmbiosTable.Type17->Speed = 1333MHz

1:265 0:000 SmbiosTable.Type17->Size = 2048MB

1:265 0:000 SmbiosTable.Type17->Bank/Device = Bank4/5 A2

1:265 0:000 SmbiosTable.Type17->Vendor =

1:265 0:000 SmbiosTable.Type17->SerialNumber =

1:265 0:000 SmbiosTable.Type17->PartNumber =

1:265 0:000 Type 17 Index = 3

1:265 0:000 Ignoring insane frequency value 0MHz

1:265 0:000 SmbiosTable.Type17->Speed = 0MHz

1:265 0:000 SmbiosTable.Type17->Size = 0MB

1:265 0:000 SmbiosTable.Type17->Bank/Device = Bank6/7 A3

1:265 0:000 SmbiosTable.Type17->Vendor = <null string>

1:265 0:000 SmbiosTable.Type17->SerialNumber = <null string>

1:265 0:000 SmbiosTable.Type17->PartNumber = <null string>

1:265 0:000 Boot status=0

1:265 0:000 Running on: 'P55A-UD3' with board 'P55A-UD3'

1:265 0:000 === [ GetCPUProperties ] ==================================

1:265 0:000 CPU Vendor = 756E6547 Model=106E5

1:265 0:000 got cores from CPUID_1 = 0

1:265 0:000 The CPU supported turbo

1:265 0:000 BrandString = Intel® Core i5 CPU 750 @ 2.67GHz

1:265 0:000 FSBFrequency=140MHz DMIvalue=133330kHz

1:265 0:000 Corrected FSBFrequency=133MHz

1:265 0:000 Vendor/Model/Stepping: 0x756E6547/0x1E/0x5

1:265 0:000 Family/ExtFamily: 0x6/0x0

1:265 0:000 MaxDiv/MinDiv: 20.0/9

1:265 0:000 Turbo: 21/21/24/24

1:265 0:000 Features: 0xBFEBFBFF

1:265 0:000 Threads: 4

1:265 0:000 Cores: 4

1:265 0:000 FSB: 133 MHz

1:265 0:000 CPU: 2800 MHz

1:265 0:000 TSC: 2800 MHz

1:265 0:000 PIS: 533 MHz

1:265 0:000 === [ GetDevices ] ========================================

1:265 0:000 PCI (00|00:00.00) : 8086 D131 class=060000

1:265 0:000 PCI (00|00:03.00) : 8086 D138 class=060400

1:265 0:000 PCI (00|01:00.00) : 1002 68B8 class=030000

1:265 0:000 - GFX: Model=ATI Radeon HD 5770 Series (ATI/AMD)

1:265 0:000 PCI (00|01:00.01) : 1002 AA58 class=040300

1:265 0:000 - HDMI Audio:

1:265 0:000 PCI (00|00:08.00) : 8086 D155 class=088000

1:265 0:000 PCI (00|00:08.01) : 8086 D156 class=088000

1:265 0:000 PCI (00|00:08.02) : 8086 D157 class=088000

1:265 0:000 PCI (00|00:08.03) : 8086 D158 class=088000

1:265 0:000 PCI (00|00:10.00) : 8086 D150 class=088000

1:265 0:000 PCI (00|00:10.01) : 8086 D151 class=088000

1:265 0:000 PCI (00|00:1A.00) : 8086 3B3B class=0C0300

1:265 0:000 PCI (00|00:1A.01) : 8086 3B3E class=0C0300

1:265 0:000 PCI (00|00:1A.02) : 8086 3B3F class=0C0300

1:265 0:000 PCI (00|00:1A.07) : 8086 3B3C class=0C0320

1:265 0:000 PCI (00|00:1B.00) : 8086 3B56 class=040300

1:265 0:000 PCI (00|00:1C.00) : 8086 3B42 class=060400

1:265 0:000 PCI (00|02:00.00) : 1B4B 9128 class=010601

1:265 0:000 PCI (00|00:1C.01) : 8086 3B44 class=060400

1:265 0:000 PCI (00|03:00.00) : 10EC 8168 class=020000

1:265 0:000 - LAN: 0 Vendor=Realtek

1:265 0:000 PCI (00|00:1C.02) : 8086 3B46 class=060400

1:265 0:000 PCI (00|04:00.00) : 1033 0194 class=0C0330

1:265 0:000 PCI (00|00:1C.03) : 8086 3B48 class=060400

1:265 0:000 PCI (00|05:00.00) : 168C 002E class=028000

1:265 0:000 - WIFI: Vendor=Atheros

1:265 0:000 PCI (00|00:1D.00) : 8086 3B36 class=0C0300

1:265 0:000 PCI (00|00:1D.01) : 8086 3B37 class=0C0300

1:265 0:000 PCI (00|00:1D.02) : 8086 3B38 class=0C0300

1:265 0:000 PCI (00|00:1D.03) : 8086 3B39 class=0C0300

1:265 0:000 PCI (00|00:1D.07) : 8086 3B34 class=0C0320

1:265 0:000 PCI (00|00:1E.00) : 8086 244E class=060401

1:265 0:000 PCI (00|06:04.00) : 1106 3038 class=0C0300

1:265 0:000 PCI (00|06:04.02) : 1106 3104 class=0C0320

1:265 0:000 PCI (00|06:05.00) : 1283 8213 class=010185

1:266 0:000 PCI (00|00:1F.00) : 8086 3B02 class=060100

1:266 0:000 PCI (00|00:1F.02) : 8086 3B22 class=010601

1:266 0:000 PCI (00|00:1F.03) : 8086 3B30 class=0C0500

1:266 0:000 PCI (00|3F:00.00) : 8086 2C51 class=060000

1:266 0:000 PCI (00|3F:00.01) : 8086 2C81 class=060000

1:266 0:000 PCI (00|3F:02.00) : 8086 2C90 class=060000

1:266 0:000 PCI (00|3F:02.01) : 8086 2C91 class=060000

1:266 0:000 PCI (00|3F:03.00) : 8086 2C98 class=060000

1:266 0:000 PCI (00|3F:03.01) : 8086 2C99 class=060000

1:266 0:000 PCI (00|3F:03.04) : 8086 2C9C class=060000

1:266 0:000 PCI (00|3F:04.00) : 8086 2CA0 class=060000

1:266 0:000 PCI (00|3F:04.01) : 8086 2CA1 class=060000

1:266 0:000 PCI (00|3F:04.02) : 8086 2CA2 class=060000

1:266 0:000 PCI (00|3F:04.03) : 8086 2CA3 class=060000

1:266 0:000 PCI (00|3F:05.00) : 8086 2CA8 class=060000

1:266 0:000 PCI (00|3F:05.01) : 8086 2CA9 class=060000

1:266 0:000 PCI (00|3F:05.02) : 8086 2CAA class=060000

1:266 0:000 PCI (00|3F:05.03) : 8086 2CAB class=060000

1:266 0:000 === [ GetDefaultSettings ] ================================

1:266 0:000 Clover load options size = 0 bytes

1:275 0:008 , Status=Success

1:275 0:000 EFI\CLOVER\config.plist loaded: Success

1:275 0:000 === [ GetListOfThemes ] ===================================

1:275 0:000 - [00]: BGM

1:302 0:026 - [01]: embedded

1:312 0:009 - [01]: random

1:312 0:000 === [ GetEarlyUserSettings ] ==============================

1:312 0:000 timeout set to 5

1:312 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)

1:312 0:000 KextsToPatch: 2 requested

1:312 0:000 - [00]: IOAHCIBlockStorage (TRIM Enabler) :: BinPatch :: data len: 11

1:312 0:000 - [01]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8

1:312 0:000 Default theme: BGM

1:312 0:000 === [ LoadDrivers ] =======================================

1:313 0:001 Loading FSInject-64.efi status=Success

1:315 0:001 Loading GrubUDF-64.efi status=Success

1:315 0:000 - driver needs connecting

1:315 0:000 Loading VBoxExt4-64.efi status=Success

1:315 0:000 - driver needs connecting

1:315 0:000 Loading NTFS.efi status=Success

1:320 0:005 - driver needs connecting

1:320 0:000 Loading PartitionDxe-64.efi status=Success

1:322 0:001 - driver needs connecting

1:322 0:000 Loading HFSPlus.efi status=Success

1:323 0:001 - driver needs connecting

1:323 0:000 Loading VBoxIso9600-64.efi status=Success

1:325 0:001 - driver needs connecting

1:325 0:000 Video bios patch requested or CustomEDID - forcing video reconnect

1:325 0:000 7 drivers needs connecting ...

1:325 0:000 PlatformDriverOverrideProtocol->GetDriver overriden

1:325 0:000 Partition driver loaded:

1:325 0:000 HFS+ driver loaded

1:325 0:000 Video driver loaded: disconnect Success

1:480 0:154 VideoBiosPatchNativeFromEdid:

1:480 0:000 Bios: ATI, MasterDataTables: 0xCA758, std_vesa: 0xCA79C, ati_mode_table: 0xCA7A0, mode_table_size: 0x1F8 BT_ATI_2

1:480 0:000 VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Success) = Success

1:480 0:000 VideoBiosUnlock: unlocked

1:480 0:000 Patching: BT_ATI_2

1:480 0:000 Parse Edid: descriptor block 0 is timing descriptor (h_active: 1920, v_active: 1200, h_sync_offset: 48, h_sync_width: 32, h_blanking: 160, v_blanking: 35, pixel_clock: 15400, v_sync_offset: 3, v_sync_width: 6)

1:480 0:000 mode 0 (320x200) patched to 1920x1200

1:480 0:000 VideoBiosLock: Success

1:486 0:005 BiosVideoDriverBindingStart!

1:486 0:000 BiosVideoCheckForVbe

1:486 0:000 EdidOverride not found

1:519 0:032 Edid1+

1:519 0:000 found Detail Timing 1920x1200

1:552 0:033 Edid0+

1:552 0:000 found Detail Timing 1920x1200

1:552 0:000 ... already present

1:556 0:004 0 1920x1200 attr=BB - ok, edid+, working, highest, pref=0

1:560 0:003 1 1152x864 attr=BB - ok, edid+, working

1:560 0:000 2 1280x960 attr=BB - ok, edid-

1:561 0:000 3 640x480 attr=BB - ok, edid+, 640x480, working

1:561 0:000 4 800x600 attr=BB - ok, edid+, 800x600, working

1:561 0:000 5 1024x768 attr=BB - ok, edid+, 1024x768, working

1:561 0:000 6 1280x1024 attr=BB - ok, edid+, working

1:563 0:001 7 1400x1050 attr=BB - ok, edid-

1:564 0:001 8 1600x1200 attr=BB - ok, edid+, working

1:568 0:004 BV new mode: 0 1920x1200

1:799 0:230 SetMode pref 0 (0) = Success

5:065 3:265 === [ InitScreen ] ========================================

5:065 0:000 SetScreenResolution: 1920x1080 - not found!

5:065 0:000 Console modes reported: 4, available modes:

5:065 0:000 - [01]: 80x25

5:065 0:000 - [02]: 80x50

5:065 0:000 - [03]: 100x31

5:065 0:000 - [04]: 240x63 (current mode)

5:065 0:000 SetScreenResolution: 1920x1200 - already set

5:065 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(1,GPT,1B386756-0922-4B96-BD59-1FC3B79E189E,0x800,0x64000)

5:068 0:003 === [ GetMacAddress ] =====================================

5:068 0:000 === [ ScanSPD ] ===========================================

5:068 0:000 SMBus device : 8086 3B30 class=0C0500 status=Success

5:068 0:000 SMBus CmdReg: 0x3

5:068 0:000 Scanning SMBus [8086:3B30], mmio: 0xFBFFC004, ioport: 0x500, hostc: 0x1

5:068 0:000 Slots to scan [8]...

5:069 0:000 SPD[0]: Type 11 @0x50

5:087 0:018 DDR speed 1333MHz

5:087 0:000 Slot: 0 Type 24 2048MB 1333MHz Vendor=Kingston PartNo=99U5458-001.A00LF SerialNo=0704020800070002

5:088 0:000 SPD[2]: Type 11 @0x52

5:106 0:018 DDR speed 1333MHz

5:106 0:000 Slot: 2 Type 24 2048MB 1333MHz Vendor=Kingston PartNo=99U5458-001.A00LF SerialNo=070A02080F040001

5:107 0:000 === [ GetAcpiTablesList ] =================================

5:112 0:005 Get Acpi Tables List from RSDT:

5:112 0:000 - [00]: FACP GBTUACPI len=116

5:112 0:000 - [01]: HPET GBTUACPI len=56

5:112 0:000 - [02]: MCFG GBTUACPI len=60

5:112 0:000 - [03]: EUDS len=1376

5:112 0:000 - [04]: TAMG GBT B0 len=2610

5:112 0:000 - [05]: APIC GBTUACPI len=188

5:112 0:000 - [06]: SLIC SLIC-MPC len=374

5:112 0:000 - [07]: SSDT PPM RCM len=7220

5:112 0:000 Calibrated TSC frequency =2664769197 =2664MHz

5:113 0:000 === [ GetUserSettings ] ===================================

5:113 0:000 USB FixOwnership: yes

5:113 0:000 Dropping 3 tables:

5:113 0:000 - [00]: Drop table signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)

5:113 0:000 - set table: 54445353, 74734930757043 to drop: no

5:113 0:000 - [01]: Drop table signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)

5:113 0:000 - set table: 54445353, 6D50757043 to drop: no

5:113 0:000 - [02]: Drop table signature="DMAR" (52414D44)

5:113 0:000 - set table: 52414D44, 0 to drop: no

5:113 0:000 - final DSDT Fix mask=9B6EF1DF

5:113 0:000 ChassisType: 0xD

5:113 0:000 Using smbios.plist at path: EFI\CLOVER\smbios.plist, Status=Not Found

5:163 0:049 === [ ScanVolumes ] =======================================

5:163 0:000 Found 11 volumes with blockIO

5:163 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)

5:165 0:002 Result of bootcode detection: bootable unknown (legacy)

5:165 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)

5:171 0:005 Result of bootcode detection: bootable unknown (legacy)

5:171 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(1,MBR,0x50CFED9B,0x800,0x32000)

5:172 0:000 Result of bootcode detection: bootable Windows (vista,win)

5:172 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,80)\HD(2,MBR,0x50CFED9B,0x32800,0xDF62000)

5:173 0:000 Result of bootcode detection: bootable Windows (vista,win)

5:173 0:000 - [04]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(1,GPT,1B386756-0922-4B96-BD59-1FC3B79E189E,0x800,0x64000)

5:176 0:003 Result of bootcode detection: bootable Clover (clover)

5:186 0:009 This is SelfVolume !!

5:186 0:000 - [05]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(2,GPT,55225B2F-270E-453A-88B9-E12C5D9F6F12,0x64800,0xC99A3800)

5:195 0:009 Result of bootcode detection: bootable Windows (vista,win)

5:195 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(3,GPT,1FE507E9-E82B-43BF-8A8C-2249DFF67874,0xC9A08000,0xF886800)

5:196 0:000 - [07]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(4,GPT,9B016371-8203-42AC-8B56-DD0EB6DC2697,0xD92CE800,0x3F800)

5:196 0:000 - [08]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(5,GPT,0E7CABFC-9F37-4AA7-8AF3-6AE9DB5DC47B,0xD930E5E8,0x135F20)

5:197 0:000 - [09]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(6,GPT,696E551C-EF37-4132-8ADD-F7E3932173C4,0xD9444800,0xF8E2800)

5:198 0:000 Result of bootcode detection: bootable Windows (vista,win)

5:198 0:000 - [10]: Volume: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(7,GPT,B7B91579-19AA-43E4-A2C2-A9F3D72AA3B8,0xE8D27000,0xE1000)

5:199 0:000 Result of bootcode detection: bootable Windows (vista,win)

5:250 0:051 Loading nvram.plist from Vol 'Macintosh HD' - loaded, size=2060

5:258 0:007 === [ PutNvramPlistToRtVars ] =============================

5:258 0:000 Adding Key: LocationServicesEnabled: Size = 1, Data: 01

5:258 0:000 Adding Key: SystemAudioVolume: Size = 1, Data: 17

5:258 0:000 Adding Key: SystemAudioVolumeDB: Size = 1, Data: F4

5:258 0:000 Adding Key: bootercfg: Size = 2, Data: 28 00

5:258 0:000 Adding Key: csr-active-config: Size = 4, Data: 67 00 00 00

5:258 0:000 Adding Key: efi-apple-recovery: Size = 414, Data: 3C 61 72 72 61 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 49 4F 4D 61 74 63 68 3C 2F 6B 65 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 49 4F 50 72 6F 76 69 64 65 72 43 6C 61 73 73 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 49 4F 4D 65 64 69 61 3C 2F 73 74 72 69 6E 67 3E 3C 6B 65 79 3E 49 4F 50 72 6F 70 65 72 74 79 4D 61 74 63 68 3C 2F 6B 65 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 55 55 49 44 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 31 42 33 38 36 37 35 36 2D 30 39 32 32 2D 34 42 39 36 2D 42 44 35 39 2D 31 46 43 33 42 37 39 45 31 38 39 45 3C 2F 73 74 72 69 6E 67 3E 3C 2F 64 69 63 74 3E 3C 2F 64 69 63 74 3E 3C 6B 65 79 3E 42 4C 4C 61 73 74 42 53 44 4E 61 6D 65 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 64 69 73 6B 32 73 31 3C 2F 73 74 72 69 6E 67 3E 3C 2F 64 69 63 74 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 49 4F 45 46 49 44 65 76 69 63 65 50 61 74 68 54 79 70 65 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 4D 65 64 69 61 46 69 6C 65 50 61 74 68 3C 2F 73 74 72 69 6E 67 3E 3C 6B 65 79 3E 50 61 74 68 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 5C 45 46 49 5C 41 50 50 4C 45 5C 46 49 52 4D 57 41 52 45 5C 4D 4D 36 31 5F 30 31 30 36 5F 42 30 41 5F 4C 4F 43 4B 45 44 2E 73 63 61 70 3C 2F 73 74 72 69 6E 67 3E 3C 2F 64 69 63 74 3E 3C 2F 61 72 72 61 79 3E

5:258 0:000 Adding Key: efi-apple-recovery-data: Size = 170, Data: 02 01 0C 00 D0 41 03 0A 00 00 00 00 01 01 06 00 02 1F 03 12 0A 00 01 00 00 00 00 00 04 01 2A 00 01 00 00 00 00 08 00 00 00 00 00 00 00 40 06 00 00 00 00 00 56 67 38 1B 22 09 96 4B BD 59 1F C3 B7 9E 18 9E 02 02 04 04 60 00 5C 00 45 00 46 00 49 00 5C 00 41 00 50 00 50 00 4C 00 45 00 5C 00 46 00 49 00 52 00 4D 00 57 00 41 00 52 00 45 00 5C 00 4D 00 4D 00 36 00 31 00 5F 00 30 00 31 00 30 00 36 00 5F 00 42 00 30 00 41 00 5F 00 4C 00 4F 00 43 00 4B 00 45 00 44 00 2E 00 73 00 63 00 61 00 70 00 00 00 7F FF 04 00

5:258 0:000 Adding Key: efi-boot-device: Size = 216, Data: 3C 61 72 72 61 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 49 4F 4D 61 74 63 68 3C 2F 6B 65 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 49 4F 50 72 6F 76 69 64 65 72 43 6C 61 73 73 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 49 4F 4D 65 64 69 61 3C 2F 73 74 72 69 6E 67 3E 3C 6B 65 79 3E 49 4F 50 72 6F 70 65 72 74 79 4D 61 74 63 68 3C 2F 6B 65 79 3E 3C 64 69 63 74 3E 3C 6B 65 79 3E 55 55 49 44 3C 2F 6B 65 79 3E 3C 73 74 72 69 6E 67 3E 31 46 45 35 30 37 45 39 2D 45 38 32 42 2D 34 33 42 46 2D 38 41 38 43 2D 32 32 34 39 44 46 46 36 37 38 37 34 3C 2F 73 74 72 69 6E 67 3E 3C 2F 64 69 63 74 3E 3C 2F 64 69 63 74 3E 3C 2F 64 69 63 74 3E 3C 2F 61 72 72 61 79 3E

5:258 0:000 Adding Key: efi-boot-device-data: Size = 91, Data: 02 01 0C 00 D0 41 08 0A 00 00 00 00 01 01 06 00 00 1C 01 01 06 00 00 00 01 04 15 00 C5 FA 31 CF 4E C2 D2 11 85 F3 00 A0 C9 3E C9 3B 81 04 01 2A 00 03 00 00 00 00 80 A0 C9 00 00 00 00 00 68 88 0F 00 00 00 00 E9 07 E5 1F 2B E8 BF 43 8A 8C 22 49 DF F6 78 74 02 02 7F FF 04 00

5:258 0:000 Adding Key: fmm-computer-name: Size = 16, Data: 42 72 65 6E 64 6F 6E E2 80 99 73 20 69 4D 61 63

5:258 0:000 Adding Key: prev-lang:kbd: Size = 5, Data: 65 6E 3A 31 35

5:258 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none'

5:258 0:000 === [ InitTheme ] =========================================

5:258 0:000 Using theme 'BGM' (EFI\CLOVER\themes\BGM)

5:259 0:000 OS main and drive as badge

5:282 0:023 Choosing theme BGM

5:282 0:000 after NVRAM boot-args=dart=0 kext-dev-mode=1

5:283 0:000 === [ ScanLoader ] ========================================

5:283 0:000 - [02]: 'System Reserved'

5:297 0:014 AddLoaderEntry for Volume Name=System Reserved

5:355 0:058 - [03]: 'WIN7_X64SSD'

5:365 0:010 - [04]: 'EFI'

5:397 0:031 AddLoaderEntry for Volume Name=EFI

5:398 0:000 - [05]: 'TSH_DATA'

5:418 0:020 - [06]: 'Macintosh HD'

5:446 0:027 AddLoaderEntry for Volume Name=Macintosh HD

5:475 0:028 Check if volume Is Hibernated:

5:475 0:000 Check sleep image 'by signature':

5:525 0:050 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success

5:525 0:000 SleepImage name from pref: ImageVolume = 'Macintosh HD', ImageName = '\private\var\vm\sleepimage'

5:555 0:030 sleepimage not found -> Not Found

5:555 0:000 hibernated: no - sign

5:557 0:002 [!] Icon 17 (icons\vol_internal_hfs.icns) not found (path: EFI\CLOVER\themes\BGM)

5:558 0:001 - [08]: 'Recovery HD'

5:570 0:011 AddLoaderEntry for Volume Name=Recovery HD

5:584 0:013 - [09]: 'WIN10'

5:602 0:018 - [10]: ''

5:613 0:010 === [ AddCustomLegacy ] ===================================

5:613 0:000 === [ AddCustomTool ] =====================================

5:639 0:026 found tool \EFI\CLOVER\tools\Shell64U.efi

5:639 0:000 Checking EFI partition Volume 4 for Clover

5:639 0:000 Found Clover

5:639 0:000 Use anime=Anim_9_Boot_Sequence frames=64

5:657 0:017 === [ FindDefaultEntry ] ==================================

5:657 0:000 === [ GetEfiBootDeviceFromNvram ] =========================

5:657 0:000 - efi-boot-device-data: PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(3,GPT,1FE507E9-E82B-43BF-8A8C-2249DFF67874,0xC9A08000,0xF886800)

5:657 0:000 - Volume: 'PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(3,GPT,1FE507E9-E82B-43BF-8A8C-2249DFF67874,0xC9A08000,0xF886800)'

5:657 0:000 - LoaderPath: '<null string>'

5:657 0:000 - Guid = 1FE507E9-E82B-43BF-8A8C-2249DFF67874

5:657 0:000 === [ FindStartupDiskVolume ] =============================

5:657 0:000 - Volume: partition = PcieRoot(0x0)\Pci(0x1C,0x0)\Pci(0x0,0x0)\VenHw(CF31FAC5-C24E-11D2-85F3-00A0C93EC93B,81)\HD(3,GPT,1FE507E9-E82B-43BF-8A8C-2249DFF67874,0xC9A08000,0xF886800)

5:657 0:000 - searching for that partition

5:657 0:000 - found entry 2. 'Boot Mac OS X from Macintosh HD', Volume 'Macintosh HD'

5:657 0:000 Boot redirected to Entry 2. 'Boot Mac OS X from Macintosh HD'

5:657 0:000 DefaultIndex=2 and MainMenu.EntryCount=10

5:657 0:000 Use anime=Anim_1_Logo frames=49

6:468 0:811 GUI ready

6:882 0:414 BootOption of the entry is empty

6:882 0:000 === [ StartLoader ] =======================================

6:882 0:000 Finally: Bus=133238kHz CPU=2665MHz

6:882 0:000 Loading boot.efi status=Success

7:327 0:445 GetOSVersion: 10.10.5 (14F1912)

7:327 0:000 Filtering KextPatches:

7:327 0:000 - [00]: IOAHCIBlockStorage (TRIM Enabler) :: BinPatch :: [OS: 10.10.5 | MatchOS: All | MatchBuild: All] ==> allowed

7:327 0:000 - [01]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.10.5 | MatchOS: All | MatchBuild: All] ==> allowed

7:327 0:000 === [ PatchSmbios ] =======================================

7:327 0:000 insert table 9 for dev 0:0

7:327 0:000 insert table 9 for dev 0:1

7:327 0:000 insert table 9 for dev 0:0

7:328 0:000 Channels: 2

7:328 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23

7:328 0:000 SMBIOS Type 17 Index = 0 => 0 0:

7:328 0:000 BANK0 DIMM0 1333MHz 2048MB

7:328 0:000 SMBIOS Type 17 Index = 1 => 2 2:

7:328 0:000 BANK1 DIMM0 1333MHz 2048MB

7:328 0:000 SMBIOS Type 17 Index = 2 => 1 1:

7:328 0:000 BANK0 DIMM1 EMPTY

7:328 0:000 SMBIOS Type 17 Index = 3 => 3 3:

7:328 0:000 BANK1 DIMM1 EMPTY

7:328 0:000 mTotalSystemMemory = 4096

7:328 0:000 NumberOfMemoryDevices = 4

7:328 0:000 Type20[0]->End = 0x1FFFFF, Type17[0] = 0x800

7:328 0:000 Type20[1]->End = 0x0, Type17[1] = 0x1800

7:328 0:000 === [ PatchACPI ] =========================================

7:328 0:000 RSDT 0xDF7D1040

7:328 0:000 FADT from RSDT: 0xDF7D1100

7:328 0:000 Xsdt is not found! Creating new one

7:328 0:000 RsdPointer is Acpi 1.0 - creating new one Acpi 2.0

7:328 0:000 RsdPointer Acpi 2.0 installed

7:328 0:000 RSDT entries = 8

7:328 0:000 Xsdt reallocation done

7:328 0:000 old FADT length=74

7:328 0:000 Found OperationRegion(SMOD, SystemMemory, FF840, ...)

7:328 0:000 Found OperationRegion(LBOC, SystemMemory, FF820, ...)

7:328 0:000 Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)

7:328 0:000 Found OperationRegion(ELKM, SystemMemory, FFFEA, ...)

7:328 0:000 Found OperationRegion(EXTM, SystemMemory, FF830, ...)

7:328 0:000 Found OperationRegion(INFO, SystemMemory, FF840, ...)

7:328 0:000 Apply DsdtFixMask=0x9B6EF1DF new way

7:328 0:000 drop _DSM mask=0x0000

7:328 0:000 === [ FixBiosDsdt ] =======================================

7:328 0:000 VideoCard devID=0x68B81002

7:328 0:000 DisplayADR1[0] = 0x30000, DisplayADR2[0] = 0x0

7:328 0:000 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE

7:328 0:000 USBADR[1] = 0x1A0001 and PCIe = 0xFFFE

7:329 0:000 USBADR[2] = 0x1A0002 and PCIe = 0xFFFE

7:329 0:000 USBADR[3] = 0x1A0007 and PCIe = 0xFFFE

7:341 0:012 Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)

7:341 0:000 USBADR[4] = 0x1C0002 and PCIe = 0x0

7:341 0:000 Found Airport Atheros at 0x1C0003, 0x0, DeviceID=0x002E

7:341 0:000 USBADR[5] = 0x1D0000 and PCIe = 0xFFFE

7:341 0:000 USBADR[6] = 0x1D0001 and PCIe = 0xFFFE

7:341 0:000 USBADR[7] = 0x1D0002 and PCIe = 0xFFFE

7:341 0:000 USBADR[8] = 0x1D0003 and PCIe = 0xFFFE

7:341 0:000 USBADR[9] = 0x1D0007 and PCIe = 0xFFFE

7:341 0:000 USBADR[10] = 0x1E0000 and PCIe = 0x40000

7:341 0:000 USBADR[11] = 0x1E0000 and PCIe = 0x40002

7:341 0:000 first CPU found at 2C offset 2F

7:341 0:000 slash found

7:341 0:000 Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_

7:341 0:000 Found PCIROOTUID = 0

7:341 0:000 Start RTC Fix

7:341 0:000 found RTC Length not match, Maybe will case CMOS reset will patch it.

7:341 0:000 found RTC had IRQNoFlag will move -3 bytes

7:341 0:000 ...len=4301

7:341 0:000 new size written to 209D shift=0 len=4301

7:341 0:000 len after correct outers 4301

7:341 0:000 Start TMR Fix

7:342 0:000 Start PIC Fix

7:342 0:000 PIC size=2B at 1F44

7:342 0:000 found PIC had IRQNoFlag will move -3 bytes

7:342 0:000 Fix Device PIC size -3

7:342 0:000 Start HPET Fix

7:342 0:000 Start Display0 Fix

7:342 0:000 add device PEG0

7:342 0:000 add device GFX0

7:342 0:000 Creating Method(_DSM) for 1002 card

7:342 0:000 now inserting Video device

7:342 0:000 ... into created bridge

7:342 0:000 patch Display #0 of Vendor=0x1002 in DSDT new way

7:342 0:000 Start NetWork Fix

7:342 0:000 have no Network device while NetworkADR2=0

7:342 0:000 NetworkADR1=1C0001 NetworkADR2=0

7:342 0:000 network DSM created, size=92

7:342 0:000 Start Airport Fix

7:342 0:000 AirportADR=1346 add patch size=12F

7:342 0:000 adr 1346 size of arpt=E8

7:342 0:000 Start SBUS Fix PCI=701 len=44C9

7:342 0:000 device (SBUS) found at 3BA3

7:342 0:000 SBUS code size fix = 0x0000005E

7:342 0:000 patch HDEF in DSDT

7:342 0:000 Start HDA Fix

7:342 0:000 found HDA device NAME(_ADR,0x001B0000) And Name is AZAL

7:342 0:000 Name AZAL present at 0x624, renaming to HDEF

7:342 0:000 Name AZAL present at 0x3C3D, renaming to HDEF

7:342 0:000 Start Add MCHC

7:342 0:000 Start Add IMEI

7:342 0:000 Start HDMI129 Fix

7:343 0:000 have no HDMI device while HDMIADR2=1

7:343 0:000 HDMIADR1=30000 HDMIADR2=1

7:343 0:000 with default properties

7:343 0:000 Start USB Fix

7:343 0:000 USB bridge[1A0000] at 2E7B, size = 31

7:343 0:000 USB bridge[1A0001] at 2F0C, size = 31

7:343 0:000 USB bridge[1A0002] at 2F9D, size = 31

7:343 0:000 USB bridge[1A0007] at 3061, size = 31

7:343 0:000 USB bridge[1C0002] at 125C, size = E8

7:343 0:000 USB bridge[1D0000] at 2EA0, size = 31

7:343 0:000 USB bridge[1D0001] at 2F31, size = 31

7:344 0:000 USB bridge[1D0002] at 2FC2, size = 31

7:344 0:000 USB bridge[1D0003] at 3053, size = 31

7:344 0:000 USB bridge[1D0007] at 3297, size = 31

7:344 0:000 USB bridge[1E0000] at 19F8, size = 2E5

7:344 0:000 USB bridge[1E0000] at 19F8, size = 342

7:344 0:000 _DSM already exists, patch USB will not be applied

7:344 0:000 Start _WAK Return Fix

7:344 0:000 _WAK Method need return data, will patch it.

7:344 0:000 return len=4ADF

7:344 0:000 deleting device CRT_

7:344 0:000 deleting device DVI_

7:344 0:000 deleting device SPKR

7:344 0:000 deleting device ECP_

7:345 0:000 deleting device LPT_

7:345 0:000 deleting device FDC0

7:345 0:000 deleting device ECP1

7:345 0:000 deleting device LPT1

7:345 0:000 Start PNLF Fix

7:345 0:000 found PWRB at 6FF

7:345 0:000 Start _S3D Fix

7:345 0:000 Start Darwin Fix

7:345 0:000 Name _OSI present at 0x20EF, renaming to OOSI

7:345 0:000 Name _OSI present at 0x20FB, renaming to OOSI

7:345 0:000 Name _OSI present at 0x2126, renaming to OOSI

7:345 0:000 Name _OSI present at 0x213B, renaming to OOSI

7:345 0:000 Name _OSI present at 0x2172, renaming to OOSI

7:345 0:000 Name _OSI present at 0x217A, renaming to OOSI

7:345 0:000 Name _OSI present at 0x218F, renaming to OOSI

7:345 0:000 Start SHUTDOWN Fix len=4594

7:345 0:000 === [ ACPIDropTables ] ====================================

7:345 0:000 === [ PatchAllSSDT ] ======================================

7:345 0:000 Patch table: SSDT PPM RCM

7:345 0:000 SSDT len = 0x1C34

7:345 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0

7:345 0:000 Xsdt has tables count=8

7:345 0:000 corrected XSDT length=100

7:345 0:000 CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8

7:345 0:000 Maximum control=0x14

7:345 0:000 Turbo control=0x18

7:345 0:000 P-States: min 0x9, max 0x18

7:345 0:000 SSDT with CPU P-States generated successfully

7:345 0:000 SSDT with CPU C-States generated successfully

7:345 0:000 === [ RestSetupOSX ] ======================================

7:345 0:000 EdidDiscovered size=128

7:345 0:000 00 | 00 FF FF FF FF FF FF 00 10 AC 2B A0 53 57 31 31

7:345 0:000 16 | 09 12 01 04 A5 34 20 78 22 B3 25 AC 51 30 B4 26

7:345 0:000 32 | 10 50 54 A5 4B 00 81 80 A9 40 71 4F 01 01 01 01

7:345 0:000 48 | 01 01 01 01 01 01 28 3C 80 A0 70 B0 23 40 30 20

7:345 0:000 64 | 36 00 07 40 21 00 00 1A 00 00 00 FF 00 44 50 30

7:345 0:000 80 | 32 39 38 32 4F 31 31 57 53 0A 00 00 00 FC 00 44

7:345 0:000 96 | 45 4C 4C 20 32 34 30 38 57 46 50 0A 00 00 00 FD

7:345 0:000 112 | 00 38 4C 1E 53 11 01 0A 20 20 20 20 20 20 00 AD

7:345 0:000 Framebuffer @0xE0000000 MMIO @0xFBBC0000 I/O Port @0x0000EE00 ROM Addr @0x00000000

7:345 0:000 ATI card POSTed,

7:345 0:000 Set VRAM for Cedar+ =1024Mb

7:345 0:000 ATI: get_vram_size returned 0x40000000

7:345 0:000 ATI Radeon EVERGREEN family

7:345 0:000 Users config name Vervet

7:345 0:000 use N ports setting from config.plist: 4

7:345 0:000 (AtiPorts) Nr of ports set to: 4

7:345 0:000 ATI Juniper ATI Radeon HD 5770 Series 1024MB (Vervet) [1002:68B8] (subsys [1682:2991]):: PcieRoot(0x0)\Pci(0x3,0x0)\Pci(0x0,0x0)

7:346 0:000 HDA Controller [8086:3B56] :: PcieRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)

7:346 0:000 RCBA access disabled; trying to enable

7:346 0:000 stringlength = 8222

7:347 0:000 CurrentMode: Width=1920 Height=1200

7:347 0:000 Beginning FSInjection

FSInjectionInstall ...

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DDD39D98

FSInjectionInstall ...

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DDD39D98

7:371 0:024 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other

7:371 0:000 Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext

7:393 0:022 Extra PlugIn kext: EFI\CLOVER\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext

7:400 0:007 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext

7:408 0:008 Extra PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\CPUSensors.kext

7:410 0:001 Extra PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\GPUSensors.kext

7:415 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\LPCSensors.kext

7:443 0:028 Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext

7:459 0:015 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10

7:465 0:006 SetStartupDiskVolume:

7:465 0:000 * Volume: 'Macintosh HD'

7:465 0:000 * LoaderPath: '<null string>'

7:465 0:000 * DevPath: Macintosh HD

7:465 0:000 * GUID = 1FE507E9-E82B-43BF-8A8C-2249DFF67874

7:465 0:000 * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>1FE507E9-E82B-43BF-8A8C-2249DFF67874</string></dict></dict></dict></array>

7:465 0:000 Custom boot is disabled

CLOVERX64_r3728.efi.zip

TheRacerMaster · September 6, 2016

system-type calculated from ModelName in Smbios section of your config.plist.

Set all to default and be happy.

system-type is the Preferred PM Profile in the ACPI FADT. Doesn't look like Clover sets this to 3 unless you manually specify smartUPS = TRUE in config.plist. Mac Pros / Xserves have this set to 3 (workstation). iMac/Mac mini are set to 1 (default value - desktop), MacBooks (Air, Pro) are set to 2 (mobile). Clover does set 1/2 though.

Balamut · September 8, 2016

@Slice and Clover gurus:

Is this a bug or am I missing something?

Looks like OS thinks I have 120 core system, should be 88 for dual CPU, no?

Slice · September 8, 2016

@Slice and Clover gurus:

Is this a bug or am I missing something?

Looks like OS thinks I have 120 core system, should be 88 for dual CPU, no?

IMG_0530.JPG

It was read from DSDT.

Balamut · September 8, 2016

Got it. Thank you.

So the solution would be manually editing dsdt and try to find what's causing it?

Slice · September 9, 2016

Yes, section "Processor()"

chris1111 · September 9, 2016

Compil Clover MacOS Sierra GM

XCODE 7.3.1

Good! No issue.

arcade33 · September 10, 2016

Compil Clover MacOS Sierra GM

XCODE 7.3.1

Good! No issue.

like you CHRIS :yes: :yes: :yes: :thumbsup_anim:

made compil this morning on SIERRA GM

XCODE 7.3.1

HackMan85 · September 10, 2016

hi, is possible the inject or patch or other for the Ati Radeon HD 6760m with id 0x67601002 for my notebook?

Mork vom Ork · September 10, 2016

sorry, if i am wrong here, but i need some advice.

I would like to inject a property for gfx card as type STRING, but it always gets injected as type DATA:

the marked string was injected via CLOVER config.plist as the following:

but as you can see in the first picture, it was injected as type DATA. Question: WHY?

what has to be done to get this injected as type STRING?

it must be possible, as you can see in this screenshot (thx to PAVO 4 providing his IORegistryExplorer file):

Any help is welcome and much appreciated.

Regards...

Mork vom Ork

fantomas · September 11, 2016

@ Mork vom Ork

The value "ATY_GPU" is the default value (as String) when the framebuffer is not properly allocated.

An example with my HD 6770:

But if the famebuffer is properly allocated, then the value is showed as "Data" type.

Clover injects "Hoolock" as the default framebuffer for my card:

name Data 41 54 59 2c 48 6f 6f 6c 6f 63 6b 50 61 72 65 6e 74   -->  ATY,HoolockParent

HackMan85 · September 11, 2016

this is my situation

Micky1979 · September 11, 2016

Your SMBIOS is a bit outdated for a 6k series? (though I think it is a rebrand of a 57xx mobile)

HackMan85 · September 11, 2016

I have to update the bios of the notebook ?

MeatWar · September 11, 2016

SMBIOS is equal to Apple machine model and indeed ur smbios is a bit old for that cpu/gpu generation...try mbp11,2, about ur AMD GPU (Caicos family) sometimes u must use another framebuffer to get output or editon on one, also in clover the setting DualPort to 0/1 is helpful in notebooks to achieve output.

Off course that an updated Bios from the manufacturer is advised to ur laptop model.

Micky1979 · September 11, 2016

I have to update the bios of the notebook ?

I'm not talking about your bios... but about the SMBIOS entry in the config.plist. Off course a framebuffer should have an lvds port (display) to work with a laptop, otherwise a manual editing (KextsToPatch) is needed.

But before try all framebuffers available:

@"AMD6000Controller:", \

@"Pithecia", @"Bulrushes", @"Cattail", @"Hydrilla", @"Duckweed", \

@"Fanwort", @"Elodea", @"Kudzu", @"Gibba", @"Lotus", \

@"Ipomoea", @"Muskgrass", @"Juncus", @"Osmunda", @"Pondweed", \

@"Spikerush", @"Typha",

You actually have Hydrilla as default and you should try all the ports available on each framebuffers... good luck

Slice · September 12, 2016

this is my situation

You should set

LoadVBios=true

See [HOW TO] Make Radeon {Desktop or Mobility} be working by using Clover

Slice · September 12, 2016

Hi guys

A question from a noob: it's about Clover support for Polaris graphics cards

https://sourceforge.net/p/cloverefiboot/code/HEAD/tree/rEFIt_UEFI/Platform/ati.c (line 277)
  //Polaris
  { 0x67C0,	0x00000000, CHIP_FAMILY_HAWAII,	"AMD Radeon Polaris 10",        kNull	},
  { 0x67DF,	0x00000000, CHIP_FAMILY_HAWAII,	"AMD Radeon RX480",             kNull	},
  { 0x67E0,	0x00000000, CHIP_FAMILY_HAWAII,	"AMD Radeon RX460",             kNull	},
  { 0x67EF,	0x00000000, CHIP_FAMILY_HAWAII,	"AMD Radeon RX460",             kNull	},
  { 0x67FF,	0x00000000, CHIP_FAMILY_HAWAII,	"AMD Radeon Polaris 11",
Shouldn't we have CHIP_FAMILY_POLARIS instead of CHIP_FAMILY_HAWAII???

Or maybe CHIP_FAMILY_BAFFIN (for Polaris 11) and CHIP_FAMILY_ELLESMERE (for Polaris 10)???

Also, are you sure about RX460 with 0x67E0??? According to AMD and Linux Kernel Driver DataBase, there's no RX 460 with that device.

Here, all known Polaris graphics cards device-ids

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67c0 ("Ellesmere [Polaris10]")

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67c1

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67c2

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67c4

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67c7

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67c8

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67c9

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67ca

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67cc

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67cf

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67df ("Ellesmere [Radeon RX 470/480]")

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67e0 ("Baffin [Polaris11]")

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67e1 ("Baffin [Polaris11]")

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67e3

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67e7

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67e8 ("Baffin [Polaris11]")

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67e9 ("Baffin [Polaris11]")

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67eb ("Baffin [Polaris11]")

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67ef ("Baffin [Radeon RX 460]")

vendor: 1002 ("Advanced Micro Devices, Inc. [AMD/ATI]"), device: 67ff ("Baffin [Polaris11]")

From Linux:

+ /* Polaris11 */

+ {0x1002, 0x67E0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS11},

+ {0x1002, 0x67E1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS11},

+ {0x1002, 0x67E8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS11},

+ {0x1002, 0x67E9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS11},

+ {0x1002, 0x67EB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS11},

+ {0x1002, 0x67FF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS11},

+ /* Polaris10 */

+ {0x1002, 0x67C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10},

+ {0x1002, 0x67DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10},

Thanks,

Sent to Clover rev3731

sorry, if i am wrong here, but i need some advice.

I would like to inject a property for gfx card as type STRING, but it always gets injected as type DATA:

the marked string was injected via CLOVER config.plist as the following:

but as you can see in the first picture, it was injected as type DATA. Question: WHY?

what has to be done to get this injected as type STRING?

It is not an error.

The DeviceTree don't contain a type field. It is IORegistryExplorer business to show what is string or probably data.

D-an-W · September 13, 2016

Morning folks, can I please ask for advice on the use of "InfoPlistPatch" and if it would be able to patch the Info.plist of AppleUSBXHCIPCI.kext (Which is inside IOUSBHostFamily.kext)?

I would like it to change "XHC1" to "XHC" which might not be possible as they are not the same length?

From this:

To This:

Slice · September 13, 2016

May be the name should ended by underscore "XHC_"

Clover General discussion

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites