Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30,171 posts in this topic

Recommended Posts

Needy
Needy
Posted
Posted

Test, please, rev 3357. It has workarounds for Wolfdale and SkyLake CPUs.

I want to see boot.log. Or even preboot.log will be enough.

attachicon.gifCLOVERX64.efi-3357.zip

 

Wolfdale.

 

It fixed the problem, indeed.

Boot log:

1:082  0:000  Clover revision: 3357  running on P31-DS3L
1:082  0:000  ... with board P31-DS3L
1:082  0:000  CPU Vendor = 756E6547 Model=10676
1:082  0:000  CPUID_4_eax=0
1:082  0:000  CPUID_4_eax=0
1:082  0:000  CPUID_4_eax=0
1:082  0:000  The CPU not supported turbo
1:082  0:000  BrandString = Intel(R) Core(TM)2 Duo CPU     E8200  @ 2.66GHz
1:082  0:000  MSR dumps:
1:082  0:000  	@0x00CD=804
1:082  0:000  	@0x0198=61A082006040620
1:082  0:000  FSBFrequency=666MHz DMIvalue=333330kHz
1:082  0:000  Corrected FSBFrequency=333MHz
1:082  0:000  Vendor/Model/Stepping: 0x756E6547/0x17/0x6
1:082  0:000  Family/ExtFamily: 0x6/0x0
1:082  0:000  MaxDiv/MinDiv: 6.0/6
1:082  0:000  Turbo: 7/0/0/0
1:082  0:000  Features: 0xBFEBFBFF
1:082  0:000  Threads: 2
1:082  0:000  Cores: 2
1:082  0:000  FSB: 333 MHz
1:082  0:000  CPU: 4000 MHz
1:082  0:000  TSC: 4000 MHz
1:082  0:000  PIS: 1333 MHz
Link to comment
Share on other sites
Needy
Needy
Posted
Posted

These messages 

1:082  0:000  CPUID_4_eax=0
1:082  0:000  CPUID_4_eax=0
1:082  0:000  CPUID_4_eax=0

means that Clover was wrong very long ago. CPUID_4 can't be used at boot time.

So this is new version 

attachicon.gifCLOVERX64.efi-3358.zip

 

It seems okay with ver. 3358.

 

Boot log:

1:102  0:000  Clover revision: 3358  running on P31-DS3L
1:102  0:000  ... with board P31-DS3L
1:102  0:000  CPU Vendor = 756E6547 Model=10676
1:102  0:000  got cores from CPUID_1 = 2
1:102  0:000  The CPU not supported turbo
1:102  0:000  BrandString = Intel(R) Core(TM)2 Duo CPU     E8200  @ 2.66GHz
1:102  0:000  MSR dumps:
1:102  0:000  	@0x00CD=804
1:102  0:000  	@0x0198=61A082006040620
1:102  0:000  FSBFrequency=666MHz DMIvalue=333330kHz
1:102  0:000  Corrected FSBFrequency=333MHz
1:102  0:000  Vendor/Model/Stepping: 0x756E6547/0x17/0x6
1:102  0:000  Family/ExtFamily: 0x6/0x0
1:102  0:000  MaxDiv/MinDiv: 6.0/6
1:102  0:000  Turbo: 7/0/0/0
1:102  0:000  Features: 0xBFEBFBFF
1:102  0:000  Threads: 2
1:102  0:000  Cores: 2
1:102  0:000  FSB: 333 MHz
1:102  0:000  CPU: 4000 MHz
1:102  0:000  TSC: 4000 MHz
1:102  0:000  PIS: 1333 MHz

Thank you, good sir :) 

Link to comment
Share on other sites
Needy
Needy
Posted
Posted

Is this required to be executed,  

0:113  0:013  BiosVideoDriverBindingStart!
0:113  0:000  BiosVideoCheckForVbe
0:113  0:000  EdidOverride not found
0:269  0:155   Edid1-
0:425  0:155   Edid0-
0:444  0:019     0 640x480 attr=3BF - ok, 640x480, working, highest, pref=0
0:445  0:000     1 800x600 attr=3BF - ok, 800x600, working, highest, pref=1
0:446  0:000     2 1024x768 attr=3BF - ok, 1024x768, working, highest, pref=2
0:446  0:000     3 1280x1024 attr=3BF - ok
0:451  0:004     4 1600x1200 attr=3BF - ok
0:451  0:000  BV new mode: 2 1024x768
0:647  0:196   SetMode pref 2 (2) = Success

..since the process is executed again later on

1:216  0:007  BiosVideoDriverBindingStart!
1:216  0:000  BiosVideoCheckForVbe
1:216  0:000  EdidOverrideFound!
1:216  0:000   found Detail Timing 1440x900
1:235  0:018     0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0
1:236  0:000     1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1
1:236  0:000     2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2
1:240  0:003     3 1440x900 attr=3BF - ok, edid+, working, highest, pref=3
1:240  0:000  BV new mode: 3 1440x900
1:516  0:275   SetMode pref 3 (3) = Success
1:628  0:112  LoadDrivers() end
1:628  0:000  Console modes reported: 4, available modes:
1:628  0:000    Mode 1: 80x25
1:628  0:000    Mode 3: 100x31
1:628  0:000    Mode 4: 180x47 (current mode)
1:628  0:000  SetScreenResolution: 1440x900 - already set

..? 

Link to comment
Share on other sites
Needy
Needy
Posted
Posted

Updated from 3354 → 3358, and began to notice audio distortions after about a minute of playing music.

  • It would be good to see the boot log.
  • Is your bus speed configured correctly?

Best regards.

Link to comment
Share on other sites
dragonmel
dragonmel
Posted
Posted

I have some issues with an install that I have been working for a couple weeks and need some professional help.. I have tried everything

 

I am using 

 

DX58so

W3680 stock settings

gtx660

1333 3x4GB 12gb kingston ECC unbuffered qualified for the DX58so

Mac Pro 5,1 smbios

 

first issue.. if I don't set the ECC to on in bios, then clover at the clover boot screen picks up the w3680, and shows turbo states 26/26/27/27   and min max 12/25 good

if I set ECC to on in bios, clover still picks up the w3680, but says not turbo capable, has 0/0/0/0 for turbo values and 12/25

neither way actually activates ECC, shows as disabled in system profiler

 

clover is not setting my qpi at all, shows 0 at the clover boot options screen and this in profiler

 

  Model Name: Mac Pro

  Model Identifier: MacPro5,1

  Processor Name: 6-Core Intel Xeon

  Processor Speed: 3.38 GHz

  Number of Processors: 1

  Total Number of Cores: 6

  L2 Cache (per Core): 256 KB

  L3 Cache: 12 MB

  Memory: 12 GB

  Bus Speed: 540 MHz

  Boot ROM Version: MP51.007F.B03

  SMC Version (system): 1.39f11

 

I am using the toleda clover hda script and using a dsdt with layout 1

I get audio out from the internal port but I don't think that my optical is working .. I am not near my stereo but I plug it into a minidisk that has optical recording and it says no input source .. is that the right layout for a 889 using this method?

 

what is the proper darkwake for this board/bios combo?

last night it woke 3 times for internet access but on the last it hung.. screen dark, fans on and locked up.. nothing that I saw in console gave it away..

 

thanks in advance for helping me get this tuned up.. oh.. the only options I have turned on in clover configurator is kext patching for external drive icons and hda, not dsdt patches or other options are required or on for boot at the moment ...

0:100  0:100  MemLog inited, TSC freq: 3378195606
0:100  0:000  LegacyRegion2: Chipset/proc: 0x34058086
0:100  0:000   Core i7 processors (PAM 0x40-0x47)
0:100  0:000   Test PAM1=(0x41=11, 0x5a=00, 0x81=0C, 0x91=32) at chipset 34058086
0:100  0:000  , Install = Success
0:113  0:013  BiosVideoDriverBindingStart!
0:113  0:000  BiosVideoCheckForVbe
0:113  0:000  EdidOverride not found
0:194  0:080   Edid1-
0:221  0:026   Edid0+
0:221  0:000   found Detail Timing 1680x1050
0:279  0:057     0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0
0:281  0:002     1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1
0:283  0:002     2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2
0:285  0:002     3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3
0:297  0:012     4 1680x1050 attr=3BF - ok, edid+, working, highest, pref=4
0:299  0:002     5 1280x800 attr=3BF - ok, edid-
0:299  0:000  BV new mode: 4 1680x1050
0:618  0:319   SetMode pref 4 (4) = Success
2:723  2:104  
2:723  0:000  Now is 11.3.2016,  0:8:18 (GMT+2047)
2:723  0:000  Starting Clover rev 3354 on CLOVER EFI
2:723  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,FD6661C4-9CA4-4F34-A881-EEE2F90F9F26,0x28,0x64000) @CD9E2698
2:723  0:000  SelfDirPath = \EFI\CLOVER
2:724  0:000  Total Memory Slots Count = 4
2:724  0:000  Type 17 Index = 0
2:724  0:000  SmbiosTable.Type17->Speed = 1333MHz
2:724  0:000  SmbiosTable.Type17->Size = 4096MB
2:724  0:000  SmbiosTable.Type17->Bank/Device = CHAN A DIMM 0 J1MY
2:724  0:000  Type 17 Index = 1
2:724  0:000  SmbiosTable.Type17->Speed = 1333MHz
2:724  0:000  SmbiosTable.Type17->Size = 0MB
2:724  0:000  SmbiosTable.Type17->Bank/Device = CHAN A DIMM 1 J2MY
2:724  0:000  Type 17 Index = 2
2:724  0:000  SmbiosTable.Type17->Speed = 1333MHz
2:724  0:000  SmbiosTable.Type17->Size = 4096MB
2:724  0:000  SmbiosTable.Type17->Bank/Device = CHAN B DIMM 0 J3MY
2:724  0:000  Type 17 Index = 3
2:724  0:000  SmbiosTable.Type17->Speed = 1333MHz
2:724  0:000  SmbiosTable.Type17->Size = 4096MB
2:724  0:000  SmbiosTable.Type17->Bank/Device = CHAN C DIMM 0 J4MY
2:724  0:000  Boot status=0
2:724  0:000  Clover revision: 3354  running on 
2:724  0:000  ... with board DX58SO
2:724  0:000  CPU Vendor = 756E6547 Model=206C2
2:724  0:000  The CPU supported turbo
2:724  0:000  BrandString = Intel(R) Xeon(R) CPU           W3680  @ 3.33GHz
2:724  0:000  non-usable FLEX_RATIO = 11900
2:724  0:000  FSBFrequency=135MHz DMIvalue=135000kHz
2:724  0:000  Corrected FSBFrequency=135MHz
2:724  0:000  Vendor/Model/Stepping: 0x756E6547/0x2C/0x2
2:724  0:000  Family/ExtFamily: 0x6/0x0
2:724  0:000  MaxDiv/MinDiv: 25.0/12
2:724  0:000  Turbo: 26/26/27/27
2:724  0:000  Features: 0xBFEBFBFF
2:724  0:000  Threads: 12
2:724  0:000  Cores: 6
2:724  0:000  FSB: 135 MHz
2:724  0:000  CPU: 3380 MHz
2:724  0:000  TSC: 3380 MHz
2:724  0:000  PIS: 540 MHz
2:724  0:000  PCI (00|00:00.00) : 8086 3405 class=060000
2:724  0:000  PCI (00|00:01.00) : 8086 3408 class=060400
2:724  0:000  PCI (00|00:03.00) : 8086 340A class=060400
2:724  0:000  PCI (00|02:00.00) : 10DE 11C0 class=030000
2:724  0:000  Found NVidia model=EVGA GeForce GTX 660
2:724  0:000  PCI (00|02:00.01) : 10DE 0E0B class=040300
2:724  0:000  PCI (00|00:07.00) : 8086 340E class=060400
2:724  0:000  PCI (00|00:10.00) : 8086 3425 class=080000
2:724  0:000  PCI (00|00:10.01) : 8086 3426 class=080000
2:724  0:000  PCI (00|00:14.00) : 8086 342E class=080000
2:724  0:000  PCI (00|00:14.01) : 8086 3422 class=080000
2:724  0:000  PCI (00|00:14.02) : 8086 3423 class=080000
2:724  0:000  PCI (00|00:14.03) : 8086 3438 class=080000
2:724  0:000  PCI (00|00:19.00) : 8086 10CC class=020000
2:724  0:000  LAN 0, Vendor=8086, MMIO=D1400000
2:724  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
2:724  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
2:724  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
2:724  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
2:724  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
2:724  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
2:724  0:000  PCI (00|00:1C.01) : 8086 3A42 class=060400
2:724  0:000  PCI (00|05:00.00) : 168C 0024 class=028000
2:724  0:000  PCI (00|00:1C.04) : 8086 3A48 class=060400
2:724  0:000  PCI (00|06:00.00) : 11AB 6121 class=01018F
2:724  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
2:724  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
2:724  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
2:724  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
2:724  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
2:724  0:000  PCI (00|07:03.00) : 104C 8023 class=0C0010
2:724  0:000  PCI (00|00:1F.00) : 8086 3A16 class=060100
2:724  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601
2:724  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
2:724  0:000  PCI (00|3F:00.00) : 8086 2C70 class=060000
2:724  0:000  PCI (00|3F:00.01) : 8086 2D81 class=060000
2:724  0:000  PCI (00|3F:02.00) : 8086 2D90 class=060000
2:724  0:000  PCI (00|3F:02.01) : 8086 2D91 class=060000
2:724  0:000  PCI (00|3F:02.02) : 8086 2D92 class=060000
2:724  0:000  PCI (00|3F:02.03) : 8086 2D93 class=060000
2:724  0:000  PCI (00|3F:03.00) : 8086 2D98 class=060000
2:724  0:000  PCI (00|3F:03.01) : 8086 2D99 class=060000
2:724  0:000  PCI (00|3F:03.04) : 8086 2D9C class=060000
2:724  0:000  PCI (00|3F:04.00) : 8086 2DA0 class=060000
2:724  0:000  PCI (00|3F:04.01) : 8086 2DA1 class=060000
2:724  0:000  PCI (00|3F:04.02) : 8086 2DA2 class=060000
2:724  0:000  PCI (00|3F:04.03) : 8086 2DA3 class=060000
2:724  0:000  PCI (00|3F:05.00) : 8086 2DA8 class=060000
2:724  0:000  PCI (00|3F:05.01) : 8086 2DA9 class=060000
2:724  0:000  PCI (00|3F:05.02) : 8086 2DAA class=060000
2:724  0:000  PCI (00|3F:05.03) : 8086 2DAB class=060000
2:724  0:000  PCI (00|3F:06.00) : 8086 2DB0 class=060000
2:724  0:000  PCI (00|3F:06.01) : 8086 2DB1 class=060000
2:724  0:000  PCI (00|3F:06.02) : 8086 2DB2 class=060000
2:724  0:000  PCI (00|3F:06.03) : 8086 2DB3 class=060000
2:724  0:000  Clover load options size = 0 bytes
2:765  0:040  Using OEM config.plist at path: EFI\CLOVER\config.plist
2:765  0:000  EFI\CLOVER\config.plist loaded: Success
2:780  0:014  Found theme directory: applestyle
2:790  0:009  Found theme directory: embedded
2:790  0:000  Found theme directory: random
2:791  0:000  Loading early settings
2:791  0:000  timeout set to 3
2:791  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
2:791  0:000  KextsToPatch: 4 requested
2:791  0:000  KextsToPatch 0: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
2:791  0:000  KextsToPatch 1: AppleHDA (t1-AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
2:791  0:000  KextsToPatch 2: AppleHDA (t1-10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
2:791  0:000  KextsToPatch 3: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC889) Kext bin patch, data len: 4
2:791  0:000  Default theme: applestyle
2:791  0:000  Hiding entries with string Windows
2:791  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
2:791  0:000  LoadDrivers() start
2:802  0:011  Loading FSInject-64.efi  status=Success
2:807  0:004  Loading VBoxHfs-64.efi  status=Success
2:807  0:000   - driver needs connecting
2:807  0:000  1 drivers needs connecting ...
2:807  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
2:828  0:020  LoadDrivers() end
2:828  0:000  SetScreenResolution: 1680x1050 - already set
2:828  0:000  Console modes reported: 4, available modes:
2:828  0:000    Mode 1: 80x25
2:828  0:000    Mode 2: 80x50
2:828  0:000    Mode 3: 100x31
2:828  0:000    Mode 4: 210x55 (current mode)
2:828  0:000  SetScreenResolution: 1680x1050 - already set
2:828  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,FD6661C4-9CA4-4F34-A881-EEE2F90F9F26,0x28,0x64000)
2:829  0:001  ScanSPD() start
2:829  0:000  SMBus CmdReg: 0x3
2:829  0:000  Scanning SMBus [8086:3A30], mmio: 0xF2004004, ioport: 0x3000, hostc: 0x1
2:830  0:000  Slots to scan [8]...
2:844  0:014  SPD[0]: Type 11 @0x50 
2:853  0:008  DDR speed 1333MHz 
2:853  0:000  Slot: 0 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9965525-008.A00LF SerialNo=0705000E090B0909 
2:874  0:020  SPD[2]: Type 11 @0x52 
2:883  0:008  DDR speed 1333MHz 
2:883  0:000  Slot: 2 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9965525-008.A00LF SerialNo=0404000E060A0D07 
2:904  0:020  SPD[4]: Type 11 @0x54 
2:912  0:008  DDR speed 1333MHz 
2:912  0:000  Slot: 4 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9965525-008.A00LF SerialNo=0704000E07010909 
2:931  0:018  ScanSPD() end
2:931  0:000  Get Acpi Tables List from RSDT:
2:931  0:000   Found table: FACP  DX58SO   len=244
2:931  0:000   Found table: APIC  DX58SO   len=312
2:931  0:000   Found table: WDDT  DX58SO   len=64
2:931  0:000   Found table: MCFG  DX58SO   len=60
2:931  0:000   Found table: ASF!  DX58SO   len=172
2:931  0:000   Found table: HPET  DX58SO   len=56
2:931  0:000   Found table: SSDT  SSDT  PM len=76292
2:931  0:000   Found table: DMAR  DX58SO   len=384
2:931  0:000   Found table: WDTT  DX58SO   len=524
2:931  0:000   Found table: ASPT  PerfTune len=52
2:931  0:000  Calibrated TSC frequency =3378195606 =3378MHz
2:932  0:000  Loading main settings
2:932  0:000  Config set ChassisType=0x6
2:932  0:000  found 4 volumes with blockIO
2:932  0:000   0. Volume:
2:932  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
2:932  0:000    Result of bootcode detection: bootable unknown (legacy)
2:932  0:000   1. Volume:
2:932  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,FD6661C4-9CA4-4F34-A881-EEE2F90F9F26,0x28,0x64000)
2:933  0:000    Result of bootcode detection: bootable Clover (clover)
2:933  0:000    This is SelfVolume !!
2:933  0:000   2. Volume:
2:933  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,34B85E8F-791D-4257-8784-BBEEE9674778,0x64028,0xE8C6E940)
2:933  0:000   3. Volume:
2:933  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,750F03D0-909B-4246-AEEA-CDB892E39EC8,0xE8CD2968,0x135F20)
2:965  0:031  PutNvramPlistToRtVars: nvram.plist not found
2:965  0:000  Using theme 'applestyle' (EFI\CLOVER\themes\applestyle)
2:971  0:005  Choosing theme applestyle
2:971  0:000  Custom legacy start
2:971  0:000  Custom legacy end
2:971  0:000  Scanning legacy ...
2:971  0:000   0: 'Whole Disc Boot' (legacy) not legacy
2:971  0:000   1: 'EFI' (clover) add legacy
3:003  0:032   added 'Boot Clover from EFI' OSType=3 Icon=clover
3:003  0:000   2: 'El CapitanHD' (legacy) not legacy
3:003  0:000   3: 'Recovery HD' (legacy) not legacy
3:003  0:000  Custom entries start
3:003  0:000  Custom entries finish
3:003  0:000  Scanning loaders...
3:003  0:000   0: 'Whole Disc Boot' no file system
3:003  0:000   1: 'EFI'
3:035  0:031   2: 'El CapitanHD'
3:069  0:034      AddLoaderEntry for Volume Name=El CapitanHD
3:083  0:013      Check if volume Is Hibernated:
3:083  0:000      Check sleep image 'by signature':
3:129  0:045      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
3:129  0:000      SleepImage name from pref: ImageVolume = 'El CapitanHD', ImageName = '\private\var\vm\sleepimage'
3:169  0:039      sleepimage not found -> Not Found
3:169  0:000       hibernated: no - sign
3:202  0:033   3: 'Recovery HD'
3:202  0:000      AddLoaderEntry for Volume Name=Recovery HD
3:248  0:045  Custom tool start
3:248  0:000  Custom tool end
3:269  0:021  found tool \EFI\CLOVER\tools\Shell64U.efi
3:269  0:000  Checking EFI partition Volume 1 for Clover
3:269  0:000   Found Clover
3:273  0:003  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
3:273  0:000  EfiBootVolume not found
3:273  0:000   found entry 1. 'Boot Mac OS X from El CapitanHD', Volume 'El CapitanHD', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,34B85E8F-791D-4257-8784-BBEEE9674778,0x64028,0xE8C6E940)\System\Library\CoreServices\boot.efi'
3:273  0:000  DefaultIndex=1 and MainMenu.EntryCount=9
3:858  0:585  Found Mouse device:
3:859  0:001  GUI ready
8:018  4:159  StartLoader() start
8:018  0:000  Entry->Settings: <null string>
8:018  0:000  Finally: Bus=135127kHz CPU=3378MHz
8:018  0:000  Kernel and Kext Patches at CE9CD5F0:
8:018  0:000  	Allowed: y
8:018  0:000  	Debug: n
8:018  0:000  	KernelCpu: n
8:018  0:000  	Lapic: n
8:018  0:000  	Haswell-E: n
8:018  0:000  	AICPUPM: n
8:018  0:000  	AppleRTC: n
8:018  0:000  	KernelPm: n
8:018  0:000  	FakeCPUID: 0x0
8:018  0:000  	ATIController: null
8:019  0:000  	ATIDataLength: 0
8:019  0:000  	0 Kexts to load
8:019  0:000  	4 Kexts to patch
8:019  0:000  	  KextPatch[0]: 8 bytes, AppleAHCIPort
8:019  0:000  	  KextPatch[1]: 6 bytes, AppleHDA
8:019  0:000  	  KextPatch[2]: 4 bytes, AppleHDA
8:019  0:000  	  KextPatch[3]: 4 bytes, AppleHDA
8:019  0:000  Loading boot.efi  status=Success
8:281  0:262  GetOSVersion: : 10.11.3
8:281  0:000  insert table 9 for dev 0:0
8:281  0:000  insert table 9 for dev 0:1
8:281  0:000  insert table 9 for dev 19:0
8:281  0:000  insert table 9 for dev 0:0
8:281  0:000  insert table 9 for dev 3:0
8:282  0:000  Not trusting SMBIOS because SPD reports different modules...
8:282  0:000  Detected alternating SMBIOS channel banks
8:282  0:000  Channels: 3
8:282  0:000  Interleave: 0 2 4 1 3 5 6 8 10 7 9 11 12 14 16 13 15 17 18 20 22 19 21 23
8:282  0:000  SMBIOS Type 17 Index = 0 => 0 0:
8:282  0:000   DIMM1 1333MHz 4096MB
8:282  0:000  mTotalSystemMemory = 4096
8:282  0:000  SMBIOS Type 17 Index = 1 => 1 2:
8:282  0:000   DIMM2 1333MHz 4096MB
8:282  0:000  mTotalSystemMemory = 8192
8:282  0:000  SMBIOS Type 17 Index = 2 => 2 4:
8:282  0:000   DIMM3 1333MHz 4096MB
8:282  0:000  mTotalSystemMemory = 12288
8:282  0:000  SMBIOS Type 17 Index = 3 => 3 1:
8:282  0:000   DIMM4 EMPTY
8:282  0:000  NumberOfMemoryDevices = 4
8:282  0:000  RSDT 0xCF7FE0AC
8:282  0:000  FADT from RSDT: 0xCF7FD000
8:282  0:000  XSDT 0xCF7FE120
8:282  0:000  FADT from XSDT: 0xCF7FD000
8:282  0:000  Xsdt reallocation done
8:282  0:000  old FADT length=F4
8:282  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
8:288  0:005  Apply DsdtFixMask=0x00000000 old way
8:288  0:000     drop _DSM mask=0x0000
8:288  0:000  ========= Auto patch DSDT Starting ========
8:288  0:000  VideoCard devID=0x11C010DE
8:288  0:000  DisplayADR1[0] = 0x30000, DisplayADR2[0] = 0x0
8:288  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
8:288  0:000  USBADR[1] = 0x1A0001 and PCIe = 0xFFFE
8:288  0:000  USBADR[2] = 0x1A0002 and PCIe = 0xFFFE
8:288  0:000  USBADR[3] = 0x1A0007 and PCIe = 0xFFFE
8:300  0:011  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
8:300  0:000  Found Airport Atheros at 0x1C0001, 0x0, DeviceID=0x0024
8:300  0:000  USBADR[4] = 0x1D0000 and PCIe = 0xFFFE
8:300  0:000  USBADR[5] = 0x1D0001 and PCIe = 0xFFFE
8:300  0:000  USBADR[6] = 0x1D0002 and PCIe = 0xFFFE
8:300  0:000  USBADR[7] = 0x1D0007 and PCIe = 0xFFFE
8:300  0:000  first CPU found at 82 offset 85
8:300  0:000  score candidate at 7E
8:300  0:000  score inserted in acpi_cpu_score _PR_
8:300  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 And CPU8 And CPU9 And CPUA And CPUB And CPUC And CPUD And CPUE And CPUF 
  within the score: _PR_
8:300  0:000  Found PCIROOTUID = 0
8:300  0:000  ========= Auto patch DSDT Finished ========
8:300  0:000  Patch table: SSDT  SSDT  PM
8:300  0:000   SSDT len = 0x12A04
8:300  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
8:300  0:000   Xsdt has tables count=10 
8:300  0:000  corrected XSDT length=116
8:300  0:000   CPUBase=0 and ApicCPUBase=0 ApicCPUNum=16
8:300  0:000  EdidDiscovered size=128
8:300  0:000  00 | 00 FF FF FF FF FF FF 00 4C 2D 7D 02 30 32 45 4D 
8:300  0:000  16 | 02 11 01 03 80 2B 1B 78 2A EE 95 A3 54 4C 99 26 
8:300  0:000  32 | 0F 50 54 BF EF 80 B3 00 81 80 81 40 71 4F 01 01 
8:300  0:000  48 | 01 01 01 01 01 01 7C 2E 90 A0 60 1A 1E 40 30 20 
8:300  0:000  64 | 36 00 B1 0F 11 00 00 1A 00 00 00 FD 00 38 4B 1E 
8:300  0:000  80 | 51 0E 00 0A 20 20 20 20 20 20 00 00 00 FC 00 53 
8:300  0:000  96 | 79 6E 63 4D 61 73 74 65 72 0A 20 20 00 00 00 FF 
8:300  0:000  112 | 00 48 56 5A 50 31 30 30 32 33 34 0A 20 20 00 04 
8:300  0:000  NVidia GFX injection not set
8:300  0:000  LAN Controller [8086:10CC] :: PcieRoot(0x0)\Pci(0x19,0x0)
8:301  0:000  HDA Controller [8086:3A3E] :: PcieRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)
8:301  0:000   RCBA access disabled; trying to enable
8:301  0:000  stringlength = 540
8:301  0:000  CurrentMode: Width=1680 Height=1050
8:301  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CD9E2398
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CD9E2398
8:301  0:000  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
8:302  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
8:311  0:009  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
8:311  0:000    Extra kext: EFI\CLOVER\kexts\10.11\realtekALC.kext
8:312  0:001  Removed efi-boot-device-data variable: Not Found
8:312  0:000  Custom boot is disabled
8:312  0:000  Closing log
Link to comment
Share on other sites
dragonmel
dragonmel
Posted
Posted

Tluck thanks for taking the time but waking is not the problem that is proper behavior not sleeping properly or waking properly is the issue.

 

If I wanted to stop it walking I could just un click wake for Internet access. Drake wake is not supported on Mac Pro it's not waking for darkewake it's waking on a rtc for network access

Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

Ok, I got back into the OS by using a fresh new config.plist. I have no idea what caused that KP. So if anyone knows, please, tell me. So I can avoid it in the future.

 

Now, my question is, shouldn't there be a resolution option in Clover GUI for 2560x1440? Cause right now, there isn't. There is 2560x1600. But not 2560x1440. And right now, it looks like 1024x768. But that's another story, and might be caused by something else.

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Hi guys

 

Any idea what does this mean? Even with a pretty clean Clover config, I still get this kp. And i have no idea why. Do I have to reinstall OS X?

 

attachicon.gifDSC_0055.JPG

This picture means you have wrong DSDT or wrong FixDSDT.

  • Like 1
Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

And remove rootless=0 boot-args

It was removed initially. I know there's no need for that. This was just "default". I got the same KP with or without those args. :)

 

Sometimes I feel like my computer caches the last boot drive somehow. Not sure this is intended.

 

Like if I try to boot from the HDD/SSD and I've got a broken config, and then I just restart (not shut down) and select a bootable USB drive, with a different (cleaner) config, it will still show the error (in my case the KP). Which is really frustrating, cause I don't know if my USB drive is actually "clean" and ok for booting, or not.

 

So the best way is to shut down the computer, and then try again to boot from the USB drive. Otherwise, i see no explanation to why it didn't work for many tries, when I was just booting into the OS from the USB drive, then suddenly, with the same drive, it booted ok...

 

Or maybe it's just the OS X caches... I don't know.

Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

Look what say @Slice!! Maybe your DSDT is wrong. Remove DSDT and test.

 

I am back into the system. No need to shout. :)) I posted this already on the previous page. Whatever it was (yes, wrong DSDT patching sounds correct) it's gone now.

Link to comment
Share on other sites
mhaeuser
mhaeuser
Posted
Posted

hello Sergey how are you?

 

Please 

 what's the correct value to be set in RTVariables-->BooterConfig to have kBootArgsFlagRebootOnPanic disabled?

Actually I have 0x28

 

I can't recall if kBootArgsFlagRebootOnPanic belongs to bootercfg, but if it does, it is disabled in 0x28 already.

Link to comment
Share on other sites
Monq
Monq
Posted
Posted

Hello people, I need help writing a kext patch. 

 

Inside AMD8000Controller I have this:

<key>PP_MclkActivityTarget</key>
<integer>5</integer>
I would like to have this instead:

<key>PP_MclkActivityTarget</key>
<integer>0</integer>
For that matter I wrote a patch by hand using the terminal (you know, echo -n blabla | base64 ...) but it didn't work. Then I tried with Clover Configurator, and it does not work either. This is what I have thus far:

<dict>
<key>Comment</key>
<string>Fix screen flicker</string>
<key>Find</key>
<data>
PGtleT5QUF9NY2xrQWN0aXZpdHlUYXJnZXQ8L2tleT48
aW50ZWdlcj41PC9pbnRlZ2VyPg==
</data>
<key>InfoPlistPatch</key>
<true/>
<key>Name</key>
<string>AMD8000Controller</string>
<key>Replace</key>
<data>
PGtleT5QUF9NY2xrQWN0aXZpdHlUYXJnZXQ8L2tleT48
aW50ZWdlcj4wPC9pbnRlZ2VyPg==
</data>
</dict>
(For some reason this forum swallows tabs...)

 

I'm wondering what I'm doing wrong. Maybe Clover requires me to also type the \n and \t characters that are inside the Info.plist so it can find them? I'm just omitting them. 

 

Any help would be very welcome, thanks.

Link to comment
Share on other sites
Micky1979
Micky1979
Posted
Posted (edited)

Pandora has a "Base64 to hex" converter or you can also use a Text Mode to work with your config.plist..

BTW I guess you need to treat your plist has raw data and see different. An Hex editor? "Hex Fiend.app" can compare files to see differences (original vs patched).

 

EDIT

Your base64 datas appear to be invalid:

post-674334-0-89486600-1457805943_thumb.png

 

EDIT II

no data are ok,copy paste from the forum is a problem,  need to remove the carriage return, then is OK.

Edited by Micky1979
Link to comment
Share on other sites
Monq
Monq
Posted
Posted

I have tried everything in fact. I enabled Clover debug, there are no errors, but it is just not working.

 

I also tried to add the tabs and carriage returns in between the two lines, but the kext is not being modified.

 

			<dict>
				<key>Comment</key>
				<string>Fix screen flicker</string>
				<key>Find</key>
				<data>PGtleT5QUF9NY2xrQWN0aXZpdHlUYXJnZXQ8L2tleT4KCQkJCTxpbnRlZ2VyPjU8L2ludGVnZXI+</data>
				<key>InfoPlistPatch</key>
				<true/>
				<key>Name</key>
				<string>AMD8000Controller</string>
				<key>Replace</key>
				<data>PGtleT5QUF9NY2xrQWN0aXZpdHlUYXJnZXQ8L2tleT4KCQkJCTxpbnRlZ2VyPjA8L2ludGVnZXI+</data>
			</dict>
Link to comment
Share on other sites
Micky1979
Micky1979
Posted
Posted (edited)

Try

Find:      3c6b6579 3e50505f 4d636c6b 41637469 76697479 54617267 65743c2f 6b65793e 0a090909 093c696e 74656765 723e303c 2f696e74 65676572 3e

Replace: 3c6b6579 3e50505f 4d636c6b 41637469 76697479 54617267 65743c2f 6b65793e 0a090909 093c696e 74656765 723e353c 2f696e74 65676572 3e

 

the same in base64:

<dict>
<key>Comment</key>
<string>test</string>
<key>Find</key>
<data>
PGtleT5QUF9NY2xrQWN0aXZpdHlUYXJnZXQ8L2tleT4KCQkJCTxpbnRlZ2VyPjA8L2ludGVnZXI+
</data>
<key>InfoPlistPatch</key>
<true/>
<key>Name</key>
<string>AMD8000Controller</string>
<key>Replace</key>
<data>
PGtleT5QUF9NY2xrQWN0aXZpdHlUYXJnZXQ8L2tleT4KCQkJCTxpbnRlZ2VyPjU8L2ludGVnZXI+
</data>
</dict>

 

Edited by Micky1979
Link to comment
Share on other sites
Monq
Monq
Posted
Posted

Try

Find: 656765723E303C2F

Replace: 656765723E353C2F

 

the same in base64:

<key>Comment</key>
				<string>test</string>
				<key>Find</key>
				<data>
				ZWdlcj4wPC8=
				</data>
				<key>InfoPlistPatch</key>
				<true/>
				<key>Name</key>
				<string>AMD8000Controller</string>
				<key>Replace</key>
				<data>
				ZWdlcj41PC8=
				</data>
EDIT

Wait, this will replace everything integer=0 to something else :hysterical: .. must be a lot of long than this :P

 

Yes, and in fact you did it the other way around (it's supposed to change "5" into "0"). In any case, I swapped those Find/Replace values, and it does not work either.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...