Clover General discussion

cecekpawon · January 19, 2016

@cuthead are you going to spam this thread?
@oSxFr33k already there, goto "dsdt fix mask" in Clover GUI to en/disable dsdt patch

blackosx · January 19, 2016

is it possiable to have an clover.exe for windows user so that people can install clover on their legacy HDD without installing the OSX and can have emulated UEFI on their system

i don't know if it possible or not just the thoughts came and share it

Is this what you need?

http://www.insanelymac.com/forum/topic/283190-bdutilityexe-make-clover-bootflash-with-macosx-distr-under-windows/

Slice · January 19, 2016

@kristofpetho

Your problem is here

0:194 0:000 VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Not Found) = Not Found

You have to add this driver

LegacyRegion2Dxe.efi.zip

kristofpetho · January 19, 2016

@kristofpetho

Your problem is here

0:194 0:000 VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Not Found) = Not Found

You have to add this driver

LegacyRegion2Dxe.efi.zip

Hi Slice, thank you so much! Since I have reverted to the original setup, which options would I also need in Clover?

I guess the Patch VBIOS?

oSxFr33k · January 19, 2016

@cuthead are you going to spam this thread?

@oSxFr33k already there, goto "dsdt fix mask" in Clover GUI to en/disable dsdt patch

So this is not a feature in Kernel and Kext Patch section only in DSDT Fix Mask section correct?

Micky1979 · January 19, 2016

in both, here some info: #8934

Slice · January 20, 2016

So this is not a feature in Kernel and Kext Patch section only in DSDT Fix Mask section correct?

DSDT Fixes: click true or false. What is mean "disable"?

LockDown · January 20, 2016

What is this for? it does not come with clover pkg, correct?

@kristofpetho

Your problem is here

0:194 0:000 VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Not Found) = Not Found

You have to add this driver

LegacyRegion2Dxe.efi.zip

Slice · January 20, 2016

What is this for? it does not come with clover pkg, correct?

The driver presents in legacy Clover and should be in UEFI. But sometimes it as absent.

This is our fault that the driver absent in clover package to install in UEFi mode.

LockDown · January 20, 2016

guess I'm not needing it as i am booted UEFI and no such error like above

0:213  0:000  VideoBiosPatchNativeFromEdid:
0:213  0:000   Bios: VideoBiosPatchInit(LegacyRegion = Success) = Success
0:213  0:000   VideoBiosUnlock:  unlocked

Micky1979 · January 20, 2016

Hi Slice, support both 32 and 64 bit?

kristofpetho · January 20, 2016

The driver presents in legacy Clover and should be in UEFI. But sometimes it as absent.

This is our fault that the driver absent in clover package to install in UEFi mode.

@Slice, it still defaults to 800x600, can you please comment on the bootlog attached? Thank you!!!

0:100  0:100  MemLog inited, TSC freq: 3295686286
0:100  0:000  
0:100  0:000  Now is 20.1.2016,  10:24:24 (GMT+2047)
0:100  0:000  Starting Clover rev 3330 on TianoCore.org EFI
0:100  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,6D19D790-BA9B-4E24-AE65-F1466316070B,0x28,0x64000) @DE7C4118
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank0/1 A0
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank2/3 A1
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank4/5 A2
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank6/7 A3
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3330  running on PH67-DS3-B3
0:100  0:000  ... with board PH67-DS3-B3
0:100  0:000  CPU Vendor = 756E6547 Model=206A7
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
0:100  0:000  MSR 0xE2 before patch 1E000403
0:100  0:000  MSR 0xE4              00020414
0:100  0:000  MSR 0xCE              00001000_60012100
0:100  0:000  non-usable FLEX_RATIO = 90000
0:100  0:000  corrected FLEX_RATIO = 80000
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency=103MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 33.0/16
0:100  0:000  Turbo: 34/35/36/37
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3400 MHz
0:100  0:000  TSC: 3400 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 1187 class=030000
0:100  0:000  Found NVidia model=PNY GeForce GTX 760
0:100  0:000  PCI (00|01:00.01) : 10DE 0E0A class=040300
0:100  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
0:100  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
0:100  0:000  PCI (00|00:1C.01) : 8086 1C12 class=060400
0:100  0:000  PCI (00|03:00.00) : 1B73 1100 class=0C0330
0:100  0:000  PCI (00|00:1C.02) : 8086 1C14 class=060400
0:100  0:000  PCI (00|04:00.00) : 10EC 8168 class=020000
0:100  0:000  LAN 0, Vendor=10EC, MMIO=DE00
0:101  0:000  PCI (00|00:1C.03) : 8086 244E class=060401
0:101  0:000  PCI (00|05:00.00) : 1283 8892 class=060401
0:101  0:000  PCI (00|06:00.00) : 13F6 8788 class=040100
0:101  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
0:101  0:000  PCI (00|00:1F.00) : 8086 1C4A class=060100
0:101  0:000  PCI (00|00:1F.02) : 8086 1C02 class=010601
0:101  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
0:101  0:000  Clover load options size = 0 bytes
0:103  0:002  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:103  0:000  EFI\CLOVER\config.plist loaded: Success
0:105  0:001  Found theme directory: christmas
0:106  0:000  Found theme directory: embedded
0:106  0:000  Found theme directory: newyear
0:107  0:000  Found theme directory: random
0:107  0:000  Found theme directory: SGR
0:109  0:001  Loading early settings
0:109  0:000  timeout set to 10
0:109  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:109  0:000  KextsToPatch: 4 requested
0:109  0:000  KextsToPatch 0: AppleHDA (t1-AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:109  0:000  KextsToPatch 1: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC889) Kext bin patch, data len: 4
0:109  0:000  KextsToPatch 2: AppleHDA (t1-10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
0:109  0:000  KextsToPatch 3: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:109  0:000  Default theme: embedded
0:109  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:109  0:000  LoadDrivers() start
0:109  0:000  Loading LegacyRegion2Dxe.efi  status=Success
0:109  0:000  LegacyRegion2: Chipset/proc: 0x01008086
0:109  0:000   Next Generation Core processors (PAM 0x80-0x86)
0:109  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01008086
0:109  0:000  , Install = Success
0:109  0:000  Loading FSInject-64.efi  status=Success
0:110  0:000  Loading HFSPlus.efi  status=Success
0:111  0:000   - driver needs connecting
0:111  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:112  0:000  Video bios patch requested or CustomEDID - forcing video reconnect
0:112  0:000  2 drivers needs connecting ...
0:112  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:112  0:000  HFS+ driver loaded 
0:112  0:000  Video driver loaded: disconnect Success
0:192  0:080  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:192  0:000  VideoBiosPatchNativeFromEdid:
0:192  0:000   Bios: nVidia, nv_data_table_offset: 0x28B, nv_data_table: 0xC028D, std_vesa: 0xC4422, nv_mode_table: 0xC4427, mode_table_size: 0x10
0:192  0:000   VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Success) = Success
0:192  0:000   VideoBiosUnlock:  unlocked
0:192  0:000   Patching: BT_NVDA
0:192  0:000   Parse Edid: descriptor block 0 is timing descriptor (h_active: 1920, v_active: 1080, h_sync_offset: 88, h_sync_width: 44, h_blanking: 280, v_blanking: 45, pixel_clock: 14850, v_sync_offset: 4, v_sync_width: 5)
0:193  0:000   patch 0: patched 1 time(s)
0:194  0:000   patch 1: patched 1 time(s)
0:195  0:000   patch 2: patched 1 time(s)
0:196  0:000   patch 3: patched 1 time(s)
0:196  0:000   VideoBiosLock: Success
6:140  5:944  LoadDrivers() end
6:140  0:000  Dump SMC keys from NVRAM:
6:140  0:000  SetScreenResolution: 1920x1080 - not found!
6:140  0:000  Console modes reported: 3, available modes:
6:140  0:000    Mode 1: 80x25 (current mode)
6:140  0:000    Mode 3: 100x31
6:140  0:000  SetScreenResolution: 800x600 - already set
6:168  0:027  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,6D19D790-BA9B-4E24-AE65-F1466316070B,0x28,0x64000)
6:169  0:000  ScanSPD() start
6:169  0:000  SMBus CmdReg: 0x3
6:169  0:000  Scanning SMBus [8086:1C22], mmio: 0xFBFFB004, ioport: 0x500, hostc: 0x1
6:169  0:000  Slots to scan [8]...
6:184  0:014  SPD[0]: Type 11 @0x50 
6:192  0:008  Found module with XMP version 1.3DDR speed 1333MHz 
6:192  0:000  Slot: 0 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CML16GX3M2A1600C10 SerialNo=0000000000000000 
6:207  0:014  SPD[1]: Type 11 @0x51 
6:215  0:008  DDR speed 1333MHz 
6:215  0:000  Slot: 1 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-020.A00LF SerialNo=020501020700070F 
6:230  0:014  SPD[2]: Type 11 @0x52 
6:238  0:008  Found module with XMP version 1.3DDR speed 1333MHz 
6:238  0:000  Slot: 2 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CML16GX3M2A1600C10 SerialNo=0000000000000000 
6:253  0:014  SPD[3]: Type 11 @0x53 
6:262  0:008  DDR speed 1333MHz 
6:262  0:000  Slot: 3 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-020.A00LF SerialNo=020301010F040707 
6:286  0:024  ScanSPD() end
6:297  0:010  Get Acpi Tables List from RSDT:
6:297  0:000   Found table: FACP  GBTUACPI len=116
6:297  0:000   Found table: MSDM  GBTUACPI len=85
6:297  0:000   Found table: HPET  GBTUACPI len=56
6:297  0:000   Found table: MCFG  GBTUACPI len=60
6:297  0:000   Found table: ASPT  PerfTune len=52
6:297  0:000   Found table: SSPT  SsptHead len=8976
6:297  0:000   Found table: EUDS   len=192
6:297  0:000   Found table: TAMG  GBT   B0 len=2298
6:297  0:000   Found table: APIC  GBTUACPI len=188
6:297  0:000   Found table: SSDT  PPM RCM  len=8012
6:297  0:000   Found table: MATS  MATS RCM len=41828
6:297  0:000  Calibrated TSC frequency =3295686286 =3295MHz
6:297  0:000  Loading main settings
6:297  0:000  USB FixOwnership: true
6:297  0:000  Config set ChassisType=0x6
6:298  0:000  found 7 volumes with blockIO
6:298  0:000   0. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
6:298  0:000    Result of bootcode detection: bootable unknown (legacy)
6:298  0:000   1. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
6:298  0:000   2. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
6:298  0:000    found optical drive
6:298  0:000   3. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)
6:298  0:000   4. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,6D19D790-BA9B-4E24-AE65-F1466316070B,0x28,0x64000)
6:298  0:000    Result of bootcode detection: bootable Clover (clover)
6:299  0:000    This is SelfVolume !!
6:299  0:000   5. Volume:
6:299  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,D93C7C49-882E-4FA1-9BFA-A52BD4A77F98,0x64028,0x1DB59340)
6:299  0:000   6. Volume:
6:299  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,A9313E32-893A-49CC-91E2-B16D2323A121,0x1DBBD368,0x135F20)
6:299  0:000   using embedded theme
6:300  0:000  Choosing theme <null string>
6:300  0:000  Custom legacy start
6:300  0:000  Custom legacy end
6:300  0:000  Scanning legacy ...
6:300  0:000   0: 'Whole Disc Boot' (legacy) not legacy
6:300  0:000   1: 'Whole Disc Boot' (legacy) not legacy
6:300  0:000   2: 'Whole Disc Boot' (legacy) not legacy
6:300  0:000   3: 'Whole Disc Boot' (legacy) not legacy
6:300  0:000   4: 'EFI' (clover) add legacy
6:300  0:000   added 'Boot Clover from EFI' OSType=3 Icon=clover
6:300  0:000   5: 'OSX' (legacy) not legacy
6:300  0:000   6: 'Recovery HD' (legacy) not legacy
6:300  0:000  Custom entries start
6:300  0:000  Custom entries finish
6:300  0:000  Scanning loaders...
6:300  0:000   0: 'Whole Disc Boot' no file system
6:300  0:000   1: 'Whole Disc Boot' no file system
6:300  0:000   2: 'Whole Disc Boot' no file system
6:300  0:000   3: 'Whole Disc Boot' no file system
6:300  0:000   4: 'EFI'
6:305  0:004   5: 'OSX'
6:305  0:000      AddLoaderEntry for Volume Name=OSX
6:307  0:001      Check if volume Is Hibernated:
6:307  0:000      Check sleep image 'by signature':
6:308  0:001      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
6:308  0:000      SleepImage name from pref: ImageVolume = 'OSX', ImageName = '\private\var\vm\sleepimage'
6:309  0:000      sleepimage not found -> Not Found
6:309  0:000       hibernated: no - sign
6:310  0:001   6: 'Recovery HD'
6:310  0:000      AddLoaderEntry for Volume Name=Recovery HD
6:311  0:000  Custom tool start
6:311  0:000  Custom tool end
6:312  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
6:312  0:000  Checking EFI partition Volume 4 for Clover
6:312  0:000   Found Clover
6:313  0:000  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
6:313  0:000  EfiBootVolume not found
6:313  0:000   found entry 1. 'Boot Mac OS X from OSX', Volume 'OSX', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,D93C7C49-882E-4FA1-9BFA-A52BD4A77F98,0x64028,0x1DB59340)\System\Library\CoreServices\boot.efi'
6:313  0:000  DefaultIndex=1 and MainMenu.EntryCount=9
6:354  0:041  Found Mouse device:
6:355  0:000  GUI ready
12:319  5:964  BootOption of the entry is empty
12:319  0:000  StartLoader() start
12:319  0:000  Entry->Settings: <null string>
12:319  0:000  Finally: Bus=99869kHz CPU=3296MHz
12:319  0:000  Kernel and Kext Patches at DE277270:
12:319  0:000  	Allowed: y
12:319  0:000  	Debug: n
12:319  0:000  	KernelCpu: n
12:319  0:000  	Lapic: n
12:319  0:000  	Haswell-E: n
12:319  0:000  	AICPUPM: y
12:319  0:000  	AppleRTC: y
12:319  0:000  	KernelPm: y
12:319  0:000  	FakeCPUID: 0x0
12:319  0:000  	ATIController: null
12:319  0:000  	ATIDataLength: 0
12:319  0:000  	0 Kexts to load
12:319  0:000  	4 Kexts to patch
12:319  0:000  	  KextPatch[0]: 6 bytes, AppleHDA
12:319  0:000  	  KextPatch[1]: 4 bytes, AppleHDA
12:319  0:000  	  KextPatch[2]: 4 bytes, AppleHDA
12:319  0:000  	  KextPatch[3]: 8 bytes, AppleAHCIPort
12:319  0:000  Loading boot.efi  status=Success
12:344  0:025  GetOSVersion: : 10.11.3
12:345  0:000  insert table 9 for dev 0:0
12:345  0:000  insert table 9 for dev 0:1
12:345  0:000  insert table 9 for dev 0:0
12:345  0:000  Channels: 2
12:345  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
12:345  0:000  SMBIOS Type 17 Index = 0 => 0 0:
12:345  0:000   DIMM1 1333MHz 8192MB
12:345  0:000  mTotalSystemMemory = 8192
12:345  0:000  SMBIOS Type 17 Index = 1 => 2 2:
12:345  0:000   DIMM2 1333MHz 8192MB
12:345  0:000  mTotalSystemMemory = 16384
12:345  0:000  SMBIOS Type 17 Index = 2 => 1 1:
12:345  0:000   DIMM3 1333MHz 4096MB
12:345  0:000  mTotalSystemMemory = 20480
12:345  0:000  SMBIOS Type 17 Index = 3 => 3 3:
12:345  0:000   DIMM4 1333MHz 4096MB
12:345  0:000  mTotalSystemMemory = 24576
12:345  0:000  NumberOfMemoryDevices = 4
12:345  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x2000
12:345  0:000  Type20[1]->End = 0x7FFFFF, Type17[1] = 0x6000
12:345  0:000  Type20[2]->End = 0xFFFFFF, Type17[2] = 0xB000
12:345  0:000  Type20[3]->End = 0x17FFFFF, Type17[3] = 0x11000
12:345  0:000  RSDT 0xDF7B3040
12:345  0:000  FADT from RSDT: 0xDF7B3100
12:345  0:000  Xsdt is not found! Creating new one
12:345  0:000  RsdPointer is Acpi 1.0 - creating new one Acpi 2.0
12:345  0:000  RsdPointer Acpi 2.0 installed
12:345  0:000  RSDT entries = 11
12:345  0:000  Xsdt reallocation done
12:345  0:000  old FADT length=74
12:345  0:000  Found OperationRegion(SMOD, SystemMemory, FF840, ...)
12:345  0:000  Found OperationRegion(LBOC, SystemMemory, FF820, ...)
12:345  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
12:345  0:000  Found OperationRegion(ELKM, SystemMemory, FFFEA, ...)
12:345  0:000  Found OperationRegion(EXTM, SystemMemory, FF830, ...)
12:345  0:000  Found OperationRegion(INFO, SystemMemory, FF840, ...)
12:345  0:000  Found OperationRegion(IGDM, SystemMemory, FFFF0000, ...)
12:345  0:000  Found OperationRegion(CCCC, SystemMemory, FE2BC, ...)
12:345  0:000  Found OperationRegion(TPMI, SystemMemory, FFFEA, ...)
12:345  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
12:347  0:001  Apply DsdtFixMask=0x00000000 old way
12:347  0:000     drop _DSM mask=0x0000
12:347  0:000  ========= Auto patch DSDT Starting ========
12:347  0:000  VideoCard devID=0x118710DE
12:347  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
12:347  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
12:382  0:035  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
12:382  0:000  USBADR[1] = 0x1C0001 and PCIe = 0x0
12:383  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
12:383  0:000  first CPU found at B0 offset B3
12:383  0:000  score candidate at AC
12:383  0:000  score inserted in acpi_cpu_score _PR_
12:383  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
  within the score: _PR_
12:383  0:000  Found PCIROOTUID = 0
12:383  0:000  ========= Auto patch DSDT Finished ========
12:383  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
12:383  0:000   Xsdt has tables count=11 
12:383  0:000   Table: SSDT  PPM RCM   8012 dropped
12:383  0:000  corrected XSDT length=116
12:383  0:000  Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
12:383  0:000   CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
12:383  0:000  EdidDiscovered size=128
12:383  0:000  00 | 00 FF FF FF FF FF FF 00 04 69 9A 24 EE 6F 02 00 
12:383  0:000  16 | 2B 19 01 03 80 34 1D 78 2A 2A C5 A4 56 4F 9E 28 
12:383  0:000  32 | 0F 50 54 B7 EF 00 71 4F 81 40 81 80 95 00 B3 00 
12:383  0:000  48 | D1 C0 81 C0 81 00 02 3A 80 18 71 38 2D 40 58 2C 
12:383  0:000  64 | 45 00 09 25 21 00 00 1E 00 00 00 FF 00 46 41 4C 
12:383  0:000  80 | 4D 54 46 31 35 39 37 32 36 0A 00 00 00 FD 00 32 
12:383  0:000  96 | 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 
12:383  0:000  112 | 00 41 53 55 53 20 56 53 32 34 37 0A 20 20 00 84 
12:383  0:000  NVidia GFX injection not set
12:383  0:000  HDA Controller [8086:1C20] :: PcieRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)
12:383  0:000  LAN Controller [10EC:8168] :: PcieRoot(0x0)\Pci(0x1C,0x2)\Pci(0x0,0x0)
12:384  0:000   RCBA access disabled; trying to enable
12:384  0:000  stringlength = 552
12:384  0:000  CurrentMode: Width=800 Height=600
12:384  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE7BBE98
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE7BBE98
12:384  0:000  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
12:385  0:000  MSR 0x1B0   set to        00000000
12:385  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
12:385  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
12:385  0:000    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC.kext
12:387  0:002    Extra kext: EFI\CLOVER\kexts\10.11\RealtekRTL8111.kext
12:389  0:001    Extra kext: EFI\CLOVER\kexts\10.11\realtekALC.kext
12:390  0:000  Removed efi-boot-device-data variable: Not Found
12:390  0:000  Custom boot is disabled
12:390  0:000  Closing log

Slice · January 20, 2016

Hi Slice, support both 32 and 64 bit?

I uploaded 64bit version. If you want I have also 32bit version for those who have EFI-32 in the ROM.

@Slice, it still defaults to 800x600, can you please comment on the bootlog attached? Thank you!!!

0:100  0:100  MemLog inited, TSC freq: 3295686286
0:100  0:000  
0:100  0:000  Now is 20.1.2016,  10:24:24 (GMT+2047)
0:100  0:000  Starting Clover rev 3330 on TianoCore.org EFI
0:100  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,6D19D790-BA9B-4E24-AE65-F1466316070B,0x28,0x64000) @DE7C4118
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank0/1 A0
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank2/3 A1
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank4/5 A2
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank6/7 A3
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3330  running on PH67-DS3-B3
0:100  0:000  ... with board PH67-DS3-B3
0:100  0:000  CPU Vendor = 756E6547 Model=206A7
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
0:100  0:000  MSR 0xE2 before patch 1E000403
0:100  0:000  MSR 0xE4              00020414
0:100  0:000  MSR 0xCE              00001000_60012100
0:100  0:000  non-usable FLEX_RATIO = 90000
0:100  0:000  corrected FLEX_RATIO = 80000
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency=103MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 33.0/16
0:100  0:000  Turbo: 34/35/36/37
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3400 MHz
0:100  0:000  TSC: 3400 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 1187 class=030000
0:100  0:000  Found NVidia model=PNY GeForce GTX 760
0:100  0:000  PCI (00|01:00.01) : 10DE 0E0A class=040300
0:100  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
0:100  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
0:100  0:000  PCI (00|00:1C.01) : 8086 1C12 class=060400
0:100  0:000  PCI (00|03:00.00) : 1B73 1100 class=0C0330
0:100  0:000  PCI (00|00:1C.02) : 8086 1C14 class=060400
0:100  0:000  PCI (00|04:00.00) : 10EC 8168 class=020000
0:100  0:000  LAN 0, Vendor=10EC, MMIO=DE00
0:101  0:000  PCI (00|00:1C.03) : 8086 244E class=060401
0:101  0:000  PCI (00|05:00.00) : 1283 8892 class=060401
0:101  0:000  PCI (00|06:00.00) : 13F6 8788 class=040100
0:101  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
0:101  0:000  PCI (00|00:1F.00) : 8086 1C4A class=060100
0:101  0:000  PCI (00|00:1F.02) : 8086 1C02 class=010601
0:101  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
0:101  0:000  Clover load options size = 0 bytes
0:103  0:002  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:103  0:000  EFI\CLOVER\config.plist loaded: Success
0:105  0:001  Found theme directory: christmas
0:106  0:000  Found theme directory: embedded
0:106  0:000  Found theme directory: newyear
0:107  0:000  Found theme directory: random
0:107  0:000  Found theme directory: SGR
0:109  0:001  Loading early settings
0:109  0:000  timeout set to 10
0:109  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:109  0:000  KextsToPatch: 4 requested
0:109  0:000  KextsToPatch 0: AppleHDA (t1-AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:109  0:000  KextsToPatch 1: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC889) Kext bin patch, data len: 4
0:109  0:000  KextsToPatch 2: AppleHDA (t1-10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
0:109  0:000  KextsToPatch 3: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:109  0:000  Default theme: embedded
0:109  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:109  0:000  LoadDrivers() start
0:109  0:000  Loading LegacyRegion2Dxe.efi  status=Success
0:109  0:000  LegacyRegion2: Chipset/proc: 0x01008086
0:109  0:000   Next Generation Core processors (PAM 0x80-0x86)
0:109  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01008086
0:109  0:000  , Install = Success
0:109  0:000  Loading FSInject-64.efi  status=Success
0:110  0:000  Loading HFSPlus.efi  status=Success
0:111  0:000   - driver needs connecting
0:111  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:112  0:000  Video bios patch requested or CustomEDID - forcing video reconnect
0:112  0:000  2 drivers needs connecting ...
0:112  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:112  0:000  HFS+ driver loaded 
0:112  0:000  Video driver loaded: disconnect Success
0:192  0:080  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:192  0:000  VideoBiosPatchNativeFromEdid:
0:192  0:000   Bios: nVidia, nv_data_table_offset: 0x28B, nv_data_table: 0xC028D, std_vesa: 0xC4422, nv_mode_table: 0xC4427, mode_table_size: 0x10
0:192  0:000   VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Success) = Success
0:192  0:000   VideoBiosUnlock:  unlocked
0:192  0:000   Patching: BT_NVDA
0:192  0:000   Parse Edid: descriptor block 0 is timing descriptor (h_active: 1920, v_active: 1080, h_sync_offset: 88, h_sync_width: 44, h_blanking: 280, v_blanking: 45, pixel_clock: 14850, v_sync_offset: 4, v_sync_width: 5)
0:193  0:000   patch 0: patched 1 time(s)
0:194  0:000   patch 1: patched 1 time(s)
0:195  0:000   patch 2: patched 1 time(s)
0:196  0:000   patch 3: patched 1 time(s)
0:196  0:000   VideoBiosLock: Success
6:140  5:944  LoadDrivers() end
6:140  0:000  Dump SMC keys from NVRAM:
6:140  0:000  SetScreenResolution: 1920x1080 - not found!
6:140  0:000  Console modes reported: 3, available modes:
6:140  0:000    Mode 1: 80x25 (current mode)
6:140  0:000    Mode 3: 100x31
6:140  0:000  SetScreenResolution: 800x600 - already set
6:168  0:027  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,6D19D790-BA9B-4E24-AE65-F1466316070B,0x28,0x64000)
6:169  0:000  ScanSPD() start
6:169  0:000  SMBus CmdReg: 0x3
6:169  0:000  Scanning SMBus [8086:1C22], mmio: 0xFBFFB004, ioport: 0x500, hostc: 0x1
6:169  0:000  Slots to scan [8]...
6:184  0:014  SPD[0]: Type 11 @0x50 
6:192  0:008  Found module with XMP version 1.3DDR speed 1333MHz 
6:192  0:000  Slot: 0 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CML16GX3M2A1600C10 SerialNo=0000000000000000 
6:207  0:014  SPD[1]: Type 11 @0x51 
6:215  0:008  DDR speed 1333MHz 
6:215  0:000  Slot: 1 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-020.A00LF SerialNo=020501020700070F 
6:230  0:014  SPD[2]: Type 11 @0x52 
6:238  0:008  Found module with XMP version 1.3DDR speed 1333MHz 
6:238  0:000  Slot: 2 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CML16GX3M2A1600C10 SerialNo=0000000000000000 
6:253  0:014  SPD[3]: Type 11 @0x53 
6:262  0:008  DDR speed 1333MHz 
6:262  0:000  Slot: 3 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-020.A00LF SerialNo=020301010F040707 
6:286  0:024  ScanSPD() end
6:297  0:010  Get Acpi Tables List from RSDT:
6:297  0:000   Found table: FACP  GBTUACPI len=116
6:297  0:000   Found table: MSDM  GBTUACPI len=85
6:297  0:000   Found table: HPET  GBTUACPI len=56
6:297  0:000   Found table: MCFG  GBTUACPI len=60
6:297  0:000   Found table: ASPT  PerfTune len=52
6:297  0:000   Found table: SSPT  SsptHead len=8976
6:297  0:000   Found table: EUDS   len=192
6:297  0:000   Found table: TAMG  GBT   B0 len=2298
6:297  0:000   Found table: APIC  GBTUACPI len=188
6:297  0:000   Found table: SSDT  PPM RCM  len=8012
6:297  0:000   Found table: MATS  MATS RCM len=41828
6:297  0:000  Calibrated TSC frequency =3295686286 =3295MHz
6:297  0:000  Loading main settings
6:297  0:000  USB FixOwnership: true
6:297  0:000  Config set ChassisType=0x6
6:298  0:000  found 7 volumes with blockIO
6:298  0:000   0. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
6:298  0:000    Result of bootcode detection: bootable unknown (legacy)
6:298  0:000   1. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
6:298  0:000   2. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
6:298  0:000    found optical drive
6:298  0:000   3. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)
6:298  0:000   4. Volume:
6:298  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,6D19D790-BA9B-4E24-AE65-F1466316070B,0x28,0x64000)
6:298  0:000    Result of bootcode detection: bootable Clover (clover)
6:299  0:000    This is SelfVolume !!
6:299  0:000   5. Volume:
6:299  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,D93C7C49-882E-4FA1-9BFA-A52BD4A77F98,0x64028,0x1DB59340)
6:299  0:000   6. Volume:
6:299  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,A9313E32-893A-49CC-91E2-B16D2323A121,0x1DBBD368,0x135F20)
6:299  0:000   using embedded theme
6:300  0:000  Choosing theme <null string>
6:300  0:000  Custom legacy start
6:300  0:000  Custom legacy end
6:300  0:000  Scanning legacy ...
6:300  0:000   0: 'Whole Disc Boot' (legacy) not legacy
6:300  0:000   1: 'Whole Disc Boot' (legacy) not legacy
6:300  0:000   2: 'Whole Disc Boot' (legacy) not legacy
6:300  0:000   3: 'Whole Disc Boot' (legacy) not legacy
6:300  0:000   4: 'EFI' (clover) add legacy
6:300  0:000   added 'Boot Clover from EFI' OSType=3 Icon=clover
6:300  0:000   5: 'OSX' (legacy) not legacy
6:300  0:000   6: 'Recovery HD' (legacy) not legacy
6:300  0:000  Custom entries start
6:300  0:000  Custom entries finish
6:300  0:000  Scanning loaders...
6:300  0:000   0: 'Whole Disc Boot' no file system
6:300  0:000   1: 'Whole Disc Boot' no file system
6:300  0:000   2: 'Whole Disc Boot' no file system
6:300  0:000   3: 'Whole Disc Boot' no file system
6:300  0:000   4: 'EFI'
6:305  0:004   5: 'OSX'
6:305  0:000      AddLoaderEntry for Volume Name=OSX
6:307  0:001      Check if volume Is Hibernated:
6:307  0:000      Check sleep image 'by signature':
6:308  0:001      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
6:308  0:000      SleepImage name from pref: ImageVolume = 'OSX', ImageName = '\private\var\vm\sleepimage'
6:309  0:000      sleepimage not found -> Not Found
6:309  0:000       hibernated: no - sign
6:310  0:001   6: 'Recovery HD'
6:310  0:000      AddLoaderEntry for Volume Name=Recovery HD
6:311  0:000  Custom tool start
6:311  0:000  Custom tool end
6:312  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
6:312  0:000  Checking EFI partition Volume 4 for Clover
6:312  0:000   Found Clover
6:313  0:000  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
6:313  0:000  EfiBootVolume not found
6:313  0:000   found entry 1. 'Boot Mac OS X from OSX', Volume 'OSX', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,D93C7C49-882E-4FA1-9BFA-A52BD4A77F98,0x64028,0x1DB59340)\System\Library\CoreServices\boot.efi'
6:313  0:000  DefaultIndex=1 and MainMenu.EntryCount=9
6:354  0:041  Found Mouse device:
6:355  0:000  GUI ready
12:319  5:964  BootOption of the entry is empty
12:319  0:000  StartLoader() start
12:319  0:000  Entry->Settings: <null string>
12:319  0:000  Finally: Bus=99869kHz CPU=3296MHz
12:319  0:000  Kernel and Kext Patches at DE277270:
12:319  0:000  	Allowed: y
12:319  0:000  	Debug: n
12:319  0:000  	KernelCpu: n
12:319  0:000  	Lapic: n
12:319  0:000  	Haswell-E: n
12:319  0:000  	AICPUPM: y
12:319  0:000  	AppleRTC: y
12:319  0:000  	KernelPm: y
12:319  0:000  	FakeCPUID: 0x0
12:319  0:000  	ATIController: null
12:319  0:000  	ATIDataLength: 0
12:319  0:000  	0 Kexts to load
12:319  0:000  	4 Kexts to patch
12:319  0:000  	  KextPatch[0]: 6 bytes, AppleHDA
12:319  0:000  	  KextPatch[1]: 4 bytes, AppleHDA
12:319  0:000  	  KextPatch[2]: 4 bytes, AppleHDA
12:319  0:000  	  KextPatch[3]: 8 bytes, AppleAHCIPort
12:319  0:000  Loading boot.efi  status=Success
12:344  0:025  GetOSVersion: : 10.11.3
12:345  0:000  insert table 9 for dev 0:0
12:345  0:000  insert table 9 for dev 0:1
12:345  0:000  insert table 9 for dev 0:0
12:345  0:000  Channels: 2
12:345  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
12:345  0:000  SMBIOS Type 17 Index = 0 => 0 0:
12:345  0:000   DIMM1 1333MHz 8192MB
12:345  0:000  mTotalSystemMemory = 8192
12:345  0:000  SMBIOS Type 17 Index = 1 => 2 2:
12:345  0:000   DIMM2 1333MHz 8192MB
12:345  0:000  mTotalSystemMemory = 16384
12:345  0:000  SMBIOS Type 17 Index = 2 => 1 1:
12:345  0:000   DIMM3 1333MHz 4096MB
12:345  0:000  mTotalSystemMemory = 20480
12:345  0:000  SMBIOS Type 17 Index = 3 => 3 3:
12:345  0:000   DIMM4 1333MHz 4096MB
12:345  0:000  mTotalSystemMemory = 24576
12:345  0:000  NumberOfMemoryDevices = 4
12:345  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x2000
12:345  0:000  Type20[1]->End = 0x7FFFFF, Type17[1] = 0x6000
12:345  0:000  Type20[2]->End = 0xFFFFFF, Type17[2] = 0xB000
12:345  0:000  Type20[3]->End = 0x17FFFFF, Type17[3] = 0x11000
12:345  0:000  RSDT 0xDF7B3040
12:345  0:000  FADT from RSDT: 0xDF7B3100
12:345  0:000  Xsdt is not found! Creating new one
12:345  0:000  RsdPointer is Acpi 1.0 - creating new one Acpi 2.0
12:345  0:000  RsdPointer Acpi 2.0 installed
12:345  0:000  RSDT entries = 11
12:345  0:000  Xsdt reallocation done
12:345  0:000  old FADT length=74
12:345  0:000  Found OperationRegion(SMOD, SystemMemory, FF840, ...)
12:345  0:000  Found OperationRegion(LBOC, SystemMemory, FF820, ...)
12:345  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
12:345  0:000  Found OperationRegion(ELKM, SystemMemory, FFFEA, ...)
12:345  0:000  Found OperationRegion(EXTM, SystemMemory, FF830, ...)
12:345  0:000  Found OperationRegion(INFO, SystemMemory, FF840, ...)
12:345  0:000  Found OperationRegion(IGDM, SystemMemory, FFFF0000, ...)
12:345  0:000  Found OperationRegion(CCCC, SystemMemory, FE2BC, ...)
12:345  0:000  Found OperationRegion(TPMI, SystemMemory, FFFEA, ...)
12:345  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
12:347  0:001  Apply DsdtFixMask=0x00000000 old way
12:347  0:000     drop _DSM mask=0x0000
12:347  0:000  ========= Auto patch DSDT Starting ========
12:347  0:000  VideoCard devID=0x118710DE
12:347  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
12:347  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
12:382  0:035  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
12:382  0:000  USBADR[1] = 0x1C0001 and PCIe = 0x0
12:383  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
12:383  0:000  first CPU found at B0 offset B3
12:383  0:000  score candidate at AC
12:383  0:000  score inserted in acpi_cpu_score _PR_
12:383  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
  within the score: _PR_
12:383  0:000  Found PCIROOTUID = 0
12:383  0:000  ========= Auto patch DSDT Finished ========
12:383  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
12:383  0:000   Xsdt has tables count=11 
12:383  0:000   Table: SSDT  PPM RCM   8012 dropped
12:383  0:000  corrected XSDT length=116
12:383  0:000  Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
12:383  0:000   CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
12:383  0:000  EdidDiscovered size=128
12:383  0:000  00 | 00 FF FF FF FF FF FF 00 04 69 9A 24 EE 6F 02 00 
12:383  0:000  16 | 2B 19 01 03 80 34 1D 78 2A 2A C5 A4 56 4F 9E 28 
12:383  0:000  32 | 0F 50 54 B7 EF 00 71 4F 81 40 81 80 95 00 B3 00 
12:383  0:000  48 | D1 C0 81 C0 81 00 02 3A 80 18 71 38 2D 40 58 2C 
12:383  0:000  64 | 45 00 09 25 21 00 00 1E 00 00 00 FF 00 46 41 4C 
12:383  0:000  80 | 4D 54 46 31 35 39 37 32 36 0A 00 00 00 FD 00 32 
12:383  0:000  96 | 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 
12:383  0:000  112 | 00 41 53 55 53 20 56 53 32 34 37 0A 20 20 00 84 
12:383  0:000  NVidia GFX injection not set
12:383  0:000  HDA Controller [8086:1C20] :: PcieRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)
12:383  0:000  LAN Controller [10EC:8168] :: PcieRoot(0x0)\Pci(0x1C,0x2)\Pci(0x0,0x0)
12:384  0:000   RCBA access disabled; trying to enable
12:384  0:000  stringlength = 552
12:384  0:000  CurrentMode: Width=800 Height=600
12:384  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE7BBE98
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE7BBE98
12:384  0:000  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
12:385  0:000  MSR 0x1B0   set to        00000000
12:385  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
12:385  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
12:385  0:000    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC.kext
12:387  0:002    Extra kext: EFI\CLOVER\kexts\10.11\RealtekRTL8111.kext
12:389  0:001    Extra kext: EFI\CLOVER\kexts\10.11\realtekALC.kext
12:390  0:000  Removed efi-boot-device-data variable: Not Found
12:390  0:000  Custom boot is disabled
12:390  0:000  Closing log

It seems you need CsmVideoDxe. It is in Clover package.

Micky1979 · January 20, 2016

I uploaded 64bit version. If you want I have also 32bit version for those who have EFI-32 in the ROM.

Yes thanks. Also, If it is not too much, I can suggest adding both here?

Slice · January 20, 2016

Yes thanks. Also, If it is not too much, I can suggest adding both here?

OK, done!

kristofpetho · January 20, 2016

I uploaded 64bit version. If you want I have also 32bit version for those who have EFI-32 in the ROM.

It seems you need CsmVideoDxe. It is in Clover package.

@Slice - still a no go... Sorry for getting back so often on this, please see my bootlog attached...

0:100  0:100  MemLog inited, TSC freq: 3295687069
0:100  0:000  
0:100  0:000  Now is 20.1.2016,  13:27:24 (GMT+2047)
0:100  0:000  Starting Clover rev 3330 on TianoCore.org EFI
0:100  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,6D19D790-BA9B-4E24-AE65-F1466316070B,0x28,0x64000) @DE7C4118
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank0/1 A0
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank2/3 A1
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank4/5 A2
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank6/7 A3
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3330  running on PH67-DS3-B3
0:100  0:000  ... with board PH67-DS3-B3
0:100  0:000  CPU Vendor = 756E6547 Model=206A7
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
0:100  0:000  MSR 0xE2 before patch 1E000403
0:100  0:000  MSR 0xE4              00020414
0:100  0:000  MSR 0xCE              00001000_60012100
0:100  0:000  non-usable FLEX_RATIO = 90000
0:100  0:000  corrected FLEX_RATIO = 80000
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency=103MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 33.0/16
0:100  0:000  Turbo: 34/35/36/37
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3400 MHz
0:100  0:000  TSC: 3400 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 1187 class=030000
0:100  0:000  Found NVidia model=PNY GeForce GTX 760
0:100  0:000  PCI (00|01:00.01) : 10DE 0E0A class=040300
0:101  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
0:101  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
0:101  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
0:101  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
0:101  0:000  PCI (00|00:1C.01) : 8086 1C12 class=060400
0:101  0:000  PCI (00|03:00.00) : 1B73 1100 class=0C0330
0:101  0:000  PCI (00|00:1C.02) : 8086 1C14 class=060400
0:101  0:000  PCI (00|04:00.00) : 10EC 8168 class=020000
0:101  0:000  LAN 0, Vendor=10EC, MMIO=DE00
0:101  0:000  PCI (00|00:1C.03) : 8086 244E class=060401
0:101  0:000  PCI (00|05:00.00) : 1283 8892 class=060401
0:101  0:000  PCI (00|06:00.00) : 13F6 8788 class=040100
0:101  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
0:101  0:000  PCI (00|00:1F.00) : 8086 1C4A class=060100
0:101  0:000  PCI (00|00:1F.02) : 8086 1C02 class=010601
0:101  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
0:101  0:000  Clover load options size = 0 bytes
0:103  0:002  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:103  0:000  EFI\CLOVER\config.plist loaded: Success
0:105  0:001  Found theme directory: christmas
0:105  0:000  Found theme directory: embedded
0:106  0:000  Found theme directory: newyear
0:107  0:000  Found theme directory: random
0:107  0:000  Found theme directory: SGR
0:109  0:001  Loading early settings
0:109  0:000  timeout set to 10
0:109  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:109  0:000  KextsToPatch: 4 requested
0:109  0:000  KextsToPatch 0: AppleHDA (t1-AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:109  0:000  KextsToPatch 1: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:109  0:000  KextsToPatch 2: AppleHDA (t1-10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
0:109  0:000  KextsToPatch 3: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC889) Kext bin patch, data len: 4
0:109  0:000  Default theme: embedded
0:109  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:109  0:000  LoadDrivers() start
0:109  0:000  Loading LegacyRegion2Dxe.efi  status=Success
0:110  0:000  LegacyRegion2: Chipset/proc: 0x01008086
0:110  0:000   Next Generation Core processors (PAM 0x80-0x86)
0:110  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01008086
0:110  0:000  , Install = Success
0:110  0:000  Loading FSInject-64.efi  status=Success
0:110  0:000  Loading HFSPlus.efi  status=Success
0:111  0:000   - driver needs connecting
0:111  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:112  0:000  Loading CsmVideoDxe-64.efi  status=Success
0:113  0:000   - driver needs connecting
0:113  0:000  2 drivers needs connecting ...
0:113  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:113  0:000  HFS+ driver loaded 
0:113  0:000  Video driver loaded: disconnect Success
0:190  0:077  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:190  0:000  VideoBiosPatchNativeFromEdid:
0:190  0:000   Bios: nVidia, nv_data_table_offset: 0x28B, nv_data_table: 0xC028D, std_vesa: 0xC4422, nv_mode_table: 0xC4427, mode_table_size: 0x10
0:190  0:000   VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Success) = Success
0:190  0:000   VideoBiosUnlock:  unlocked
0:190  0:000   Patching: BT_NVDA
0:190  0:000   Parse Edid: descriptor block 0 is timing descriptor (h_active: 1920, v_active: 1080, h_sync_offset: 88, h_sync_width: 44, h_blanking: 280, v_blanking: 45, pixel_clock: 14850, v_sync_offset: 4, v_sync_width: 5)
0:191  0:000   patch 0: patched 1 time(s)
0:192  0:000   patch 1: patched 1 time(s)
0:193  0:000   patch 2: patched 1 time(s)
0:194  0:000   patch 3: patched 1 time(s)
0:194  0:000   VideoBiosLock: Success
6:141  5:947  LoadDrivers() end
6:141  0:000  Dump SMC keys from NVRAM:
6:141  0:000  SetScreenResolution: 1920x1080 - not found!
6:141  0:000  Console modes reported: 3, available modes:
6:141  0:000    Mode 1: 80x25 (current mode)
6:141  0:000    Mode 3: 100x31
6:141  0:000  SetScreenResolution: 800x600 - already set
6:169  0:027  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,6D19D790-BA9B-4E24-AE65-F1466316070B,0x28,0x64000)
6:170  0:000  ScanSPD() start
6:170  0:000  SMBus CmdReg: 0x3
6:170  0:000  Scanning SMBus [8086:1C22], mmio: 0xFBFFB004, ioport: 0x500, hostc: 0x1
6:170  0:000  Slots to scan [8]...
6:185  0:014  SPD[0]: Type 11 @0x50 
6:193  0:008  Found module with XMP version 1.3DDR speed 1333MHz 
6:193  0:000  Slot: 0 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CML16GX3M2A1600C10 SerialNo=0000000000000000 
6:208  0:014  SPD[1]: Type 11 @0x51 
6:216  0:008  DDR speed 1333MHz 
6:216  0:000  Slot: 1 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-020.A00LF SerialNo=020501020700070F 
6:231  0:014  SPD[2]: Type 11 @0x52 
6:239  0:008  Found module with XMP version 1.3DDR speed 1333MHz 
6:239  0:000  Slot: 2 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CML16GX3M2A1600C10 SerialNo=0000000000000000 
6:254  0:014  SPD[3]: Type 11 @0x53 
6:262  0:008  DDR speed 1333MHz 
6:262  0:000  Slot: 3 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=99U5471-020.A00LF SerialNo=020301010F040707 
6:287  0:024  ScanSPD() end
6:298  0:010  Get Acpi Tables List from RSDT:
6:298  0:000   Found table: FACP  GBTUACPI len=116
6:298  0:000   Found table: MSDM  GBTUACPI len=85
6:298  0:000   Found table: HPET  GBTUACPI len=56
6:298  0:000   Found table: MCFG  GBTUACPI len=60
6:298  0:000   Found table: ASPT  PerfTune len=52
6:298  0:000   Found table: SSPT  SsptHead len=8976
6:298  0:000   Found table: EUDS   len=192
6:298  0:000   Found table: TAMG  GBT   B0 len=2298
6:298  0:000   Found table: APIC  GBTUACPI len=188
6:298  0:000   Found table: SSDT  PPM RCM  len=8012
6:298  0:000   Found table: MATS  MATS RCM len=41828
6:298  0:000  Calibrated TSC frequency =3295687069 =3295MHz
6:298  0:000  Loading main settings
6:298  0:000  USB FixOwnership: true
6:298  0:000  Config set ChassisType=0x6
6:299  0:000  found 7 volumes with blockIO
6:299  0:000   0. Volume:
6:299  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
6:299  0:000    Result of bootcode detection: bootable unknown (legacy)
6:299  0:000   1. Volume:
6:299  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
6:299  0:000   2. Volume:
6:299  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
6:299  0:000    found optical drive
6:299  0:000   3. Volume:
6:299  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0x0,0x0)
6:299  0:000   4. Volume:
6:299  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,6D19D790-BA9B-4E24-AE65-F1466316070B,0x28,0x64000)
6:299  0:000    Result of bootcode detection: bootable Clover (clover)
6:300  0:000    This is SelfVolume !!
6:300  0:000   5. Volume:
6:300  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,D93C7C49-882E-4FA1-9BFA-A52BD4A77F98,0x64028,0x1DB59340)
6:300  0:000   6. Volume:
6:300  0:000    PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,A9313E32-893A-49CC-91E2-B16D2323A121,0x1DBBD368,0x135F20)
6:300  0:000   using embedded theme
6:301  0:000  Choosing theme <null string>
6:301  0:000  Custom legacy start
6:301  0:000  Custom legacy end
6:301  0:000  Scanning legacy ...
6:301  0:000   0: 'Whole Disc Boot' (legacy) not legacy
6:301  0:000   1: 'Whole Disc Boot' (legacy) not legacy
6:301  0:000   2: 'Whole Disc Boot' (legacy) not legacy
6:301  0:000   3: 'Whole Disc Boot' (legacy) not legacy
6:301  0:000   4: 'EFI' (clover) add legacy
6:301  0:000   added 'Boot Clover from EFI' OSType=3 Icon=clover
6:301  0:000   5: 'OSX' (legacy) not legacy
6:301  0:000   6: 'Recovery HD' (legacy) not legacy
6:301  0:000  Custom entries start
6:301  0:000  Custom entries finish
6:301  0:000  Scanning loaders...
6:301  0:000   0: 'Whole Disc Boot' no file system
6:301  0:000   1: 'Whole Disc Boot' no file system
6:301  0:000   2: 'Whole Disc Boot' no file system
6:301  0:000   3: 'Whole Disc Boot' no file system
6:301  0:000   4: 'EFI'
6:305  0:004   5: 'OSX'
6:306  0:000      AddLoaderEntry for Volume Name=OSX
6:307  0:001      Check if volume Is Hibernated:
6:307  0:000      Check sleep image 'by signature':
6:308  0:001      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
6:308  0:000      SleepImage name from pref: ImageVolume = 'OSX', ImageName = '\private\var\vm\sleepimage'
6:309  0:000      sleepimage not found -> Not Found
6:309  0:000       hibernated: no - sign
6:310  0:001   6: 'Recovery HD'
6:310  0:000      AddLoaderEntry for Volume Name=Recovery HD
6:311  0:000  Custom tool start
6:311  0:000  Custom tool end
6:312  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
6:312  0:000  Checking EFI partition Volume 4 for Clover
6:312  0:000   Found Clover
6:313  0:000  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
6:313  0:000  EfiBootVolume not found
6:313  0:000   found entry 1. 'Boot Mac OS X from OSX', Volume 'OSX', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,D93C7C49-882E-4FA1-9BFA-A52BD4A77F98,0x64028,0x1DB59340)\System\Library\CoreServices\boot.efi'
6:313  0:000  DefaultIndex=1 and MainMenu.EntryCount=9
6:354  0:041  Found Mouse device:
6:355  0:000  GUI ready
9:000  2:645  BootOption of the entry is empty
9:000  0:000  StartLoader() start
9:000  0:000  Entry->Settings: <null string>
9:000  0:000  Finally: Bus=99869kHz CPU=3296MHz
9:000  0:000  Kernel and Kext Patches at DE277270:
9:000  0:000  	Allowed: y
9:000  0:000  	Debug: n
9:000  0:000  	KernelCpu: n
9:000  0:000  	Lapic: n
9:000  0:000  	Haswell-E: n
9:000  0:000  	AICPUPM: y
9:000  0:000  	AppleRTC: y
9:000  0:000  	KernelPm: y
9:000  0:000  	FakeCPUID: 0x0
9:000  0:000  	ATIController: null
9:000  0:000  	ATIDataLength: 0
9:000  0:000  	0 Kexts to load
9:000  0:000  	4 Kexts to patch
9:000  0:000  	  KextPatch[0]: 6 bytes, AppleHDA
9:000  0:000  	  KextPatch[1]: 8 bytes, AppleAHCIPort
9:000  0:000  	  KextPatch[2]: 4 bytes, AppleHDA
9:000  0:000  	  KextPatch[3]: 4 bytes, AppleHDA
9:000  0:000  Loading boot.efi  status=Success
9:026  0:025  GetOSVersion: : 10.11.3
9:026  0:000  insert table 9 for dev 0:0
9:026  0:000  insert table 9 for dev 0:1
9:026  0:000  insert table 9 for dev 0:0
9:026  0:000  Channels: 2
9:026  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
9:026  0:000  SMBIOS Type 17 Index = 0 => 0 0:
9:026  0:000   DIMM1 1333MHz 8192MB
9:026  0:000  mTotalSystemMemory = 8192
9:026  0:000  SMBIOS Type 17 Index = 1 => 2 2:
9:026  0:000   DIMM2 1333MHz 8192MB
9:026  0:000  mTotalSystemMemory = 16384
9:026  0:000  SMBIOS Type 17 Index = 2 => 1 1:
9:026  0:000   DIMM3 1333MHz 4096MB
9:026  0:000  mTotalSystemMemory = 20480
9:026  0:000  SMBIOS Type 17 Index = 3 => 3 3:
9:026  0:000   DIMM4 1333MHz 4096MB
9:026  0:000  mTotalSystemMemory = 24576
9:026  0:000  NumberOfMemoryDevices = 4
9:026  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x2000
9:026  0:000  Type20[1]->End = 0x7FFFFF, Type17[1] = 0x6000
9:026  0:000  Type20[2]->End = 0xFFFFFF, Type17[2] = 0xB000
9:026  0:000  Type20[3]->End = 0x17FFFFF, Type17[3] = 0x11000
9:026  0:000  RSDT 0xDF7B3040
9:026  0:000  FADT from RSDT: 0xDF7B3100
9:026  0:000  Xsdt is not found! Creating new one
9:026  0:000  RsdPointer is Acpi 1.0 - creating new one Acpi 2.0
9:026  0:000  RsdPointer Acpi 2.0 installed
9:026  0:000  RSDT entries = 11
9:026  0:000  Xsdt reallocation done
9:026  0:000  old FADT length=74
9:026  0:000  Found OperationRegion(SMOD, SystemMemory, FF840, ...)
9:026  0:000  Found OperationRegion(LBOC, SystemMemory, FF820, ...)
9:026  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
9:026  0:000  Found OperationRegion(ELKM, SystemMemory, FFFEA, ...)
9:026  0:000  Found OperationRegion(EXTM, SystemMemory, FF830, ...)
9:026  0:000  Found OperationRegion(INFO, SystemMemory, FF840, ...)
9:026  0:000  Found OperationRegion(IGDM, SystemMemory, FFFF0000, ...)
9:026  0:000  Found OperationRegion(CCCC, SystemMemory, FE2BC, ...)
9:026  0:000  Found OperationRegion(TPMI, SystemMemory, FFFEA, ...)
9:027  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
9:029  0:002  Apply DsdtFixMask=0x00000000 old way
9:029  0:000     drop _DSM mask=0x0000
9:029  0:000  ========= Auto patch DSDT Starting ========
9:029  0:000  VideoCard devID=0x118710DE
9:029  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
9:029  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
9:064  0:034  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
9:064  0:000  USBADR[1] = 0x1C0001 and PCIe = 0x0
9:064  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
9:064  0:000  first CPU found at B0 offset B3
9:064  0:000  score candidate at AC
9:064  0:000  score inserted in acpi_cpu_score _PR_
9:064  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
  within the score: _PR_
9:064  0:000  Found PCIROOTUID = 0
9:064  0:000  ========= Auto patch DSDT Finished ========
9:064  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
9:064  0:000   Xsdt has tables count=11 
9:064  0:000   Table: SSDT  PPM RCM   8012 dropped
9:064  0:000  corrected XSDT length=116
9:064  0:000  Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
9:064  0:000   CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
9:064  0:000  EdidDiscovered size=128
9:064  0:000  00 | 00 FF FF FF FF FF FF 00 04 69 9A 24 EE 6F 02 00 
9:064  0:000  16 | 2B 19 01 03 80 34 1D 78 2A 2A C5 A4 56 4F 9E 28 
9:064  0:000  32 | 0F 50 54 B7 EF 00 71 4F 81 40 81 80 95 00 B3 00 
9:064  0:000  48 | D1 C0 81 C0 81 00 02 3A 80 18 71 38 2D 40 58 2C 
9:065  0:000  64 | 45 00 09 25 21 00 00 1E 00 00 00 FF 00 46 41 4C 
9:065  0:000  80 | 4D 54 46 31 35 39 37 32 36 0A 00 00 00 FD 00 32 
9:065  0:000  96 | 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 
9:065  0:000  112 | 00 41 53 55 53 20 56 53 32 34 37 0A 20 20 00 84 
9:065  0:000  NVidia GFX injection not set
9:065  0:000  HDA Controller [8086:1C20] :: PcieRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)
9:065  0:000  LAN Controller [10EC:8168] :: PcieRoot(0x0)\Pci(0x1C,0x2)\Pci(0x0,0x0)
9:065  0:000   RCBA access disabled; trying to enable
9:065  0:000  stringlength = 552
9:065  0:000  CurrentMode: Width=800 Height=600
9:065  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE7BBE98
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE7BBE98
9:065  0:000  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
9:066  0:000  MSR 0x1B0   set to        00000000
9:066  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
9:067  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
9:067  0:000    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC.kext
9:068  0:001    Extra kext: EFI\CLOVER\kexts\10.11\RealtekRTL8111.kext
9:070  0:001    Extra kext: EFI\CLOVER\kexts\10.11\realtekALC.kext
9:071  0:000  Removed efi-boot-device-data variable: Not Found
9:071  0:000  Custom boot is disabled
9:071  0:000  Closing log

Damx · January 20, 2016

Another strange thing with my Aspire 7720G I'd like to report.

My Geforce 9500M GS is shown as Acer Geforce 8600M GT. Inject -> NVidia is set to true.

The bootlog shows that originally Clover recognizes it correctly as 9500, but then at the end of the log it suddenly changed to 8600 for some reason after the injection.

The ID is correct: 0405, which should be 9500.

3:956 0:000 PCI (00|01:00.00) : 10DE 0405 class=030000
3:956 0:000 Found NVidia model=Acer GeForce 9500M GS
...
...
11:554 0:276 patch_nvidia_rom 11:554 0:000 version 60.84.5D.00.13
11:554 0:000 nVidia Acer GeForce 8600M GT 512MB NV84 [10DE:0405] ::
11:554 0:000 PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)
11:554 0:000 devprop_add_nvidia_template

I appreciate your suggestions.

D-an-W · January 20, 2016

I just tried to build 3333 (Last built was 3332) but it failed with the error below, anyone else get this?

Ran 260 tests in 1.309s

OK

Running edk2 build for CloverX64 using the command:
build  -D USE_APPLE_HFSPLUS_DRIVER -D USE_LOW_EBDA -p Clover/Clover.dsc  -a X64 -b RELEASE -t GCC49 -n 9 

Build environment: Darwin-15.4.0-x86_64-i386-64bit
Build start time: 18:56:20, Jan.20 2016

WORKSPACE        = /Users/Dan/Downloads/CloverGrowerPro/edk2
ECP_SOURCE       = /Users/Dan/Downloads/CloverGrowerPro/edk2/EdkCompatibilityPkg
EDK_SOURCE       = /Users/Dan/Downloads/CloverGrowerPro/edk2/EdkCompatibilityPkg
EFI_SOURCE       = /Users/Dan/Downloads/CloverGrowerPro/edk2/EdkCompatibilityPkg
EDK_TOOLS_PATH   = /Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools


Architecture(s)  = X64
Build target     = RELEASE
Toolchain        = GCC49

Active Platform          = /Users/Dan/Downloads/CloverGrowerPro/edk2/Clover/Clover.dsc
Flash Image Definition   = /Users/Dan/Downloads/CloverGrowerPro/edk2/Clover/Clover.fdf

Processing meta-data . 


build.py...
 : error C0DE: Unknown fatal error when processing [/Users/Dan/Downloads/CloverGrowerPro/edk2/Clover/Clover.dsc]
	
(Please send email to edk2-devel@lists.sourceforge.net for help, attaching following call stack trace!)

(Python 2.7.10 on darwin) Traceback (most recent call last):
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2047, in Main
    MyBuild.Launch()
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 1802, in Launch
    self._MultiThreadBuildPlatform()
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 1597, in _MultiThreadBuildPlatform
    self.Progress
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/Source/Python/AutoGen/AutoGen.py", line 175, in __new__
    if not AutoGenObject._Init(Workspace, MetaFile, Target, Toolchain, Arch, *args, **kwargs):
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/Source/Python/AutoGen/AutoGen.py", line 320, in _Init
    FdDict = Fdf.Profile.FdDict[Fdf.CurrentFdName]
KeyError: None


- Failed -
Build end time: 18:56:21, Jan.20 2016
Build total time: 00:00:01

Cloverx64 release  ERROR!!


Ejecting RAM disk
"disk2" unmounted.
"disk2" ejected.
Dans-Mac-mini:~ Dan$

chris1111 · January 20, 2016

I just tried to build 3333 (Last built was 3332) but it failed with the error below, anyone else get this?

Ran 260 tests in 1.309s

OK

Running edk2 build for CloverX64 using the command:
build  -D USE_APPLE_HFSPLUS_DRIVER -D USE_LOW_EBDA -p Clover/Clover.dsc  -a X64 -b RELEASE -t GCC49 -n 9 

Build environment: Darwin-15.4.0-x86_64-i386-64bit
Build start time: 18:56:20, Jan.20 2016

WORKSPACE        = /Users/Dan/Downloads/CloverGrowerPro/edk2
ECP_SOURCE       = /Users/Dan/Downloads/CloverGrowerPro/edk2/EdkCompatibilityPkg
EDK_SOURCE       = /Users/Dan/Downloads/CloverGrowerPro/edk2/EdkCompatibilityPkg
EFI_SOURCE       = /Users/Dan/Downloads/CloverGrowerPro/edk2/EdkCompatibilityPkg
EDK_TOOLS_PATH   = /Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools


Architecture(s)  = X64
Build target     = RELEASE
Toolchain        = GCC49

Active Platform          = /Users/Dan/Downloads/CloverGrowerPro/edk2/Clover/Clover.dsc
Flash Image Definition   = /Users/Dan/Downloads/CloverGrowerPro/edk2/Clover/Clover.fdf

Processing meta-data . 


build.py...
 : error C0DE: Unknown fatal error when processing [/Users/Dan/Downloads/CloverGrowerPro/edk2/Clover/Clover.dsc]
	
(Please send email to edk2-devel@lists.sourceforge.net for help, attaching following call stack trace!)

(Python 2.7.10 on darwin) Traceback (most recent call last):
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2047, in Main
    MyBuild.Launch()
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 1802, in Launch
    self._MultiThreadBuildPlatform()
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 1597, in _MultiThreadBuildPlatform
    self.Progress
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/Source/Python/AutoGen/AutoGen.py", line 175, in __new__
    if not AutoGenObject._Init(Workspace, MetaFile, Target, Toolchain, Arch, *args, **kwargs):
  File "/Users/Dan/Downloads/CloverGrowerPro/edk2/BaseTools/Source/Python/AutoGen/AutoGen.py", line 320, in _Init
    FdDict = Fdf.Profile.FdDict[Fdf.CurrentFdName]
KeyError: None


- Failed -
Build end time: 18:56:21, Jan.20 2016
Build total time: 00:00:01

Cloverx64 release  ERROR!!


Ejecting RAM disk
"disk2" unmounted.
"disk2" ejected.
Dans-Mac-mini:~ Dan$

Used the file attaching here

CloverGrowerPro/edk2/BaseTools/Source/Python/AutoGen/AutoGen.py

Its come from my Working Manual build ; its work on CGP

D-an-W · January 20, 2016

All fixed, thanks Chris

chris1111 · January 20, 2016

The driver presents in legacy Clover and should be in UEFI. But sometimes it as absent.

This is our fault that the driver absent in clover package to install in UEFi mode.

I ad the driver in my next Package CS E

Thanks!

Description is ok ?

mhaeuser · January 20, 2016

Still has the ProjectOSX logo? RIP.

chris1111 · January 20, 2016

Still has the ProjectOSX logo? RIP.

The logo is the blackosx Theme BGM El cap icons :lol:

More beauty

Feliks · January 21, 2016

I'm not sure if this is an issue with Clover itself or on my end of things. If someone could please help I'd appreciate; I'd create a thread here but I'm not allowed (even though I have passed both the quizzes and can post everywhere else)

The error is Clover isn't appearing, and that trying to access it through the BIOS boot menu ("Mac OS X") doesn't work and instead just pulls up whatever other bootloader seems to be default at the time (Windows Boot Manager or GRUB for Antergos Linux)

Slice · January 21, 2016

Another strange thing with my Aspire 7720G I'd like to report.

My Geforce 9500M GS is shown as Acer Geforce 8600M GT. Inject -> NVidia is set to true.

The bootlog shows that originally Clover recognizes it correctly as 9500, but then at the end of the log it suddenly changed to 8600 for some reason after the injection.

The ID is correct: 0405, which should be 9500.
3:956 0:000 PCI (00|01:00.00) : 10DE 0405 class=030000
3:956 0:000 Found NVidia model=Acer GeForce 9500M GS
...
...
11:554 0:276 patch_nvidia_rom 11:554 0:000 version 60.84.5D.00.13
11:554 0:000 nVidia Acer GeForce 8600M GT 512MB NV84 [10DE:0405] ::
11:554 0:000 PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)
11:554 0:000 devprop_add_nvidia_template
I appreciate your suggestions.

It seems to be a name found in your nvidia_rom.

I ad the driver in my next Package CS E

Thanks!

Description is ok ?

OK

Still has the ProjectOSX logo? RIP.

It was a mother of the project.

Clover General discussion

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites