magnifico Posted October 24, 2015 Share Posted October 24, 2015 Sergey hi how are my friend? Please...I created the pen drive with EL 10.11.1 with AptioFix, because I have this error? I used create Installer media ...and after i installed clover on pen drive. PS:The issue happens only with the installer, when i boot from the installed system aptiofix works Link to comment Share on other sites More sharing options...
mhaeuser Posted October 24, 2015 Share Posted October 24, 2015 Why does Apple allocate fixed addresses now even higher? Anyway, you need to increase the relocation block size once more... or use AptioFix2. 2 Link to comment Share on other sites More sharing options...
magnifico Posted October 24, 2015 Share Posted October 24, 2015 How can you increase DF? Can you explain ? Link to comment Share on other sites More sharing options...
Ramalama Posted October 25, 2015 Share Posted October 25, 2015 How can you increase DF? Can you explain ? http://sourceforge.net/p/cloverefiboot/code/HEAD/tree/OsxAptioFixDrv/OsxAptioFixDrv.c #define KERNEL_BLOCK_NO_RT_SIZE_PAGES 0x6000 <-- Change this to 0x8000 I think Download-Fritz meant this :-) Cheers :-) 2 Link to comment Share on other sites More sharing options...
magnifico Posted October 25, 2015 Share Posted October 25, 2015 I can not do Link to comment Share on other sites More sharing options...
Slice Posted October 25, 2015 Share Posted October 25, 2015 Hi Carmine, it is simpler for you to use AptioFix2 Best! 1 Link to comment Share on other sites More sharing options...
magnifico Posted October 25, 2015 Share Posted October 25, 2015 Hi Carmine, it is simpler for you to use AptioFix2 Best! Ok teacher. ..done Link to comment Share on other sites More sharing options...
liujianwei Posted October 26, 2015 Share Posted October 26, 2015 BIOS Setting CPU Feature Thermal Management Control:Disable PPM(EIST) Mode:Disable Limit CPUID MaxVal:Disable C1E Function:Disable Execute Disable Bit:Enable Virtualization Technology:Enable Core Multi-Processing:Enable Voltage Setting CPU VID Special Add:+250mV DRAM Voltage Control:2.100V SB Core/CPU PLL Voltage:1.75V NB Core Voltage:1.2700V CPU VTT Voltage:1.27V Vcore Droop Control:Disable Clockgen Voltage Control:3.75V CPU GTL 0/2 REF Volt:0.67X CPU GTL 1/3 REF Volt:0.67X North Bridge GTL REF Volt:0.67X FSB Vref:2B Genie BIOS Setting CPU Clock Amplitude:900mv CPU CLock Ratio:9x CPU Clock:450 MHz Target CPU Clock:4050 MHz DRAM Speed:400/800 Target DRAM Speed:DDR2 900 DRAM Timing Enhance Data Transmitting:Auto Enhance Addressing:Auto T2 Dispatch:Auto Flex Memory Mode:Auto CAS Latency Time (tCL):Auto RAS# to CAS# Delay (tRCD):Auto RAS# Precharge (tRP):Auto Precharge Delay (tRAS):Auto All Precharge to ACT:Auto REF to ACT Delay (tRFC):Auto Performance LVL(Read delay):Auto Read delay phase adjust:Press To Enter Write to PRE Delay(tWR):Auto Rank Write to Read(tWRT):Auto ACT to ACT Delay(tRRD):Auto Read To Write delay(tRDWR):Auto Ranks Write to Write(tWRWR):Auto Ranks Write To Read(tWRRD):Auto Read CAS# Precharge(tRTP):Auto All PRE to Refresh:Auto Clock Setting Fin Delay DLL and RCOMP Settings:By Menu CH1 DRAM Default Skew:Model 3 CH1 DRAM Default Skew:Model 3 RCOMP Setting:Model 3 Fine Delay Step Degree:70ps Ch1 Clock Crossing Setting:Auto Ch2 Clock Crossing Setting:Auto Ch1Ch2 CommonClock Setting:Auto with Clover+ACBEL IP430 Power Supply+INNO3D GEFORCE GTX 260 GOLD Graphic Card=unstable with Chameleon+CORSAIR CS550M Power Supply+EVGA GT 740 2GB SUPERCLOCKED Graphic Card=stable Clover can't handle 400x8?Sorry for my non sense. Link to comment Share on other sites More sharing options...
Slice Posted October 26, 2015 Share Posted October 26, 2015 Set 399 to check. 1 Link to comment Share on other sites More sharing options...
Slice Posted October 26, 2015 Share Posted October 26, 2015 Hey arsradu, can you upload Romanian translation into Pootle and commit to Clover from there? The file on pootle is broken now, you have to make it again. ro.po.zip Link to comment Share on other sites More sharing options...
arsradu Posted October 26, 2015 Share Posted October 26, 2015 Hey arsradu, can you upload Romanian translation into Pootle and commit to Clover from there? The file on pootle is broken now, you have to make it again. ro.po.zip Hi, Slice All the translations on pootle seem to be broken now. I will redo romanian when I have a bit of time and let you know. I can use the the English version now, right? Or the template? Which one? Also, just to be sure, the correct version should be the one with 1404 words, right? I re-uploaded the previous version (with 1303 words) by mistake. I suppose we can't work directly with that, can we? If not, I'll start over again. And do it from scratch. Update: nevermind. I'm working on it. Be back soon. Link to comment Share on other sites More sharing options...
LockDown Posted October 26, 2015 Share Posted October 26, 2015 how to tell which EDK2 version is installed in terminal? Nevermind, Soved svn info|grep 'Revision:' Link to comment Share on other sites More sharing options...
smolderas Posted October 26, 2015 Share Posted October 26, 2015 how to tell which EDK2 version is installed in terminal? svn info /path/to/the/edk2 Link to comment Share on other sites More sharing options...
arsradu Posted October 26, 2015 Share Posted October 26, 2015 Hey arsradu, can you upload Romanian translation into Pootle and commit to Clover from there? The file on pootle is broken now, you have to make it again. ro.po.zip Ok, Slice. Should be done now. Please, let me know if everything ok. So, from what I could see, the only changes were in the newly added themes. I also uploaded the updated RO translation here for your convenience (in case you need it). Cheers! ro.po.zip Link to comment Share on other sites More sharing options...
Slice Posted October 26, 2015 Share Posted October 26, 2015 Ok, Slice. Should be done now. Please, let me know if everything ok. So, from what I could see, the only changes were in the newly added themes. I also uploaded the updated RO translation here for your convenience (in case you need it). Cheers! You should also press "Commit all to VCS". Don't bother, I did this for you. Link to comment Share on other sites More sharing options...
arsradu Posted October 26, 2015 Share Posted October 26, 2015 You should also press "Commit all to VCS". Don't bother, I did this for you. I didn't know that. Now I know. Thank you! Everything else is ok? Link to comment Share on other sites More sharing options...
Slice Posted October 26, 2015 Share Posted October 26, 2015 I think yes. Other languages should be updated. Link to comment Share on other sites More sharing options...
LockDown Posted October 26, 2015 Share Posted October 26, 2015 CloverUpdater.app not building on my machine was due to things coded into the Xcode build files ... (doesnt matter issue is same whether using CGP or "manual" build). i opened Xcode and fixed build issues for this component. 1) edk2 location set to /Users/slice/src ... which doesn't exist on my machine 2) SDK set to macosx6 vs macosx ... which i don't have ... etc Has this been fixed in the repo? Link to comment Share on other sites More sharing options...
arsradu Posted October 26, 2015 Share Posted October 26, 2015 I think yes. Other languages should be updated. I made a few suggestions for French, if someone wants to review them and commit them, as well. Link to comment Share on other sites More sharing options...
liujianwei Posted October 26, 2015 Share Posted October 26, 2015 Set 399 to check. CPU Feature Thermal Management Control:Disable PPM(EIST) Mode:Disable Limit CPUID MaxVal:Disable C1E Function:Disable Execute Disable Bit:Enable Virtualization Technology:Enable Core Multi-Processing:Enable Voltage Setting CPU VID Special Add:+250mV DRAM Voltage Control:2.100V SB Core/CPU PLL Voltage:1.75V NB Core Voltage:1.2700V CPU VTT Voltage:1.27V Vcore Droop Control:Disable Clockgen Voltage Control:3.75V CPU GTL 0/2 REF Volt:0.67X CPU GTL 1/3 REF Volt:0.67X North Bridge GTL REF Volt:0.67X FSB Vref:2B Genie BIOS Setting CPU Clock Amplitude:900mv CPU CLock Ratio:9x CPU Clock:450 MHz Target CPU Clock:4050 MHz DRAM Speed:400/800 Target DRAM Speed:DDR2 900 DRAM Timing Enhance Data Transmitting:Auto Enhance Addressing:Auto T2 Dispatch:Auto Flex Memory Mode:Auto CAS Latency Time (tCL):Auto RAS# to CAS# Delay (tRCD):Auto RAS# Precharge (tRP):Auto Precharge Delay (tRAS):Auto All Precharge to ACT:Auto REF to ACT Delay (tRFC):Auto Performance LVL(Read delay):Auto Read delay phase adjust:Press To Enter Write to PRE Delay(tWR):Auto Rank Write to Read(tWRT):Auto ACT to ACT Delay(tRRD):Auto Read To Write delay(tRDWR):Auto Ranks Write to Write(tWRWR):Auto Ranks Write To Read(tWRRD):Auto Read CAS# Precharge(tRTP):Auto All PRE to Refresh:Auto Clock Setting Fin Delay DLL and RCOMP Settings:By Menu CH1 DRAM Default Skew:Model 3 CH1 DRAM Default Skew:Model 3 RCOMP Setting:Model 3 Fine Delay Step Degree:70ps Ch1 Clock Crossing Setting:Auto Ch2 Clock Crossing Setting:Auto Ch1Ch2 CommonClock Setting:Auto Link to comment Share on other sites More sharing options...
chris1111 Posted October 27, 2015 Share Posted October 27, 2015 Slice could you please Update the theme inside the Clover Package because all of my theme is updated in the repo with os_cap.icns Link to comment Share on other sites More sharing options...
jperkins909 Posted October 27, 2015 Share Posted October 27, 2015 Is there any use to updating clover if you have a perfectly working config? I update, but at this point I'm not exactly sure why since fixing things that aren't broken sometimes doesn't end well. Link to comment Share on other sites More sharing options...
LockDown Posted October 27, 2015 Share Posted October 27, 2015 if it ain't broke, don't fix it. 1 Link to comment Share on other sites More sharing options...
Slice Posted October 27, 2015 Share Posted October 27, 2015 Slice could you please Update the theme inside the Clover Package because all of my theme is updated in the repo with os_cap.icns OK, will do this next package. Link to comment Share on other sites More sharing options...
chiefsalami Posted October 27, 2015 Share Posted October 27, 2015 I was wondering how graphic device detection/injection is done in Clover. For example, I have a Firepro W7100 8GB PCI-E card that is detected as a Radeon 4xxx (don't remember exactly) by clover based on the device/vendor ID. It didn't work at all, but I patched AMDRadeonX4000.kext to add my deviceID and modified a framebuffer for the port information described in another guide. I add the FakeID (although I don't have to, since it is correctly detecting the device ID) and also specify the modded frambuffer in the Graphics settings in Clover. By doing this, I can get into the desktop and have at least one display working, but with flickering and poor performance. However, Clover still incorrectly detects my video card no matter what settings I put, and therefore Mac 10.11 also gets the wrong information (shown as Radeon 7MB). Where is the database that Clover uses to populate the card information based on the device ID? How is it done, and how can I change it so that it picks up the information for my card? I'm determined to make this card work fully in OS X, and I'm getting there... device ID is 692b, vendor 1002 Link to comment Share on other sites More sharing options...
Recommended Posts