Clover General discussion

insanelyDeepak · February 19, 2015

Thank you for your reply,here is output:

diskutil list
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *128.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Taylor Swift            80.0 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data WIN8                    47.2 GB    disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *32.0 GB    disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Install OS X Yosemite   6.0 GB     disk1s2
   3:       Microsoft Basic Data WIN81                   6.0 GB     disk1s3
   4:       Microsoft Basic Data TEMP                    19.7 GB    disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *1.0 TB     disk2
   1:               Windows_NTFS Windows7                53.7 GB    disk2s1
   2:                  Apple_HFS Games                   429.5 GB   disk2s2
   3:                  Apple_HFS Downloads               429.5 GB   disk2s3
   4:               Windows_NTFS WindowsSoftware         87.5 GB    disk2s4

sudo gdisk /dev/disk0
Password:
GPT fdisk (gdisk) version 0.8.10

Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
  MBR: hybrid
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with hybrid MBR; using GPT.

sudo gdisk /dev/disk1
GPT fdisk (gdisk) version 0.8.10

Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
  MBR: hybrid
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with hybrid MBR; using GPT.

After removed hybrid MBR

sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10

Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

sudo gdisk /dev/disk1
GPT fdisk (gdisk) version 0.8.10

Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.

Can't find bootmgfw.efi in install.wim,so I download it from http://www.nextofwindows.com/how-to-make-uefi-bootable-usb-flash-drive-to-install-windows-8/

Without remove USB HybridMBR,boot to USB Clover,select bootmgfw.efi,get this

IMG_20150220_011416.jpg

Rremove USB HybridMBR,computer stuck at BIOS splash.Seems like computer cannot accept Pure GPT USB.

Use Rremoved SSD HybridMBR Clover to install USB WIN81.Said driver cannot find.Seems like SSD and USB EFI file cannot access.

Cannot install Windows 8 UEFI with Clover

for locating bootmgfw.efi open install.wim with 7-zip and navigate to Windows\Boot\EFI\ bootmgfw.efi ...

now for this error IMG_20150220_011416.jpg

download Rufus and set to GPT for UEFI Computer , FileSystem=NTFS see screenshot

now copy bootmgfw.efi to efi\microsoft\boot and rename cdboot.efi to cdboot.BAK

try to boot with bootmgfw.efi using Clover EFI , i have successfully installed this ..

Good luck

fusion71au · February 19, 2015

Thank you for your reply,here is output:

diskutil list

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme *128.0 GB disk0

1: EFI EFI 209.7 MB disk0s1

2: Apple_HFS Taylor Swift 80.0 GB disk0s2

3: Apple_Boot Recovery HD 650.0 MB disk0s3

4: Microsoft Basic Data WIN8 47.2 GB disk0s4

/dev/disk1

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme *32.0 GB disk1

1: EFI EFI 209.7 MB disk1s1

2: Apple_HFS Install OS X Yosemite 6.0 GB disk1s2

3: Microsoft Basic Data WIN81 6.0 GB disk1s3

4: Microsoft Basic Data TEMP 19.7 GB disk1s4

/dev/disk2

#: TYPE NAME SIZE IDENTIFIER

0: FDisk_partition_scheme *1.0 TB disk2

1: Windows_NTFS Windows7 53.7 GB disk2s1

2: Apple_HFS Games 429.5 GB disk2s2

3: Apple_HFS Downloads 429.5 GB disk2s3

4: Windows_NTFS WindowsSoftware 87.5 GB disk2s4

sudo gdisk /dev/disk0

Password:

GPT fdisk (gdisk) version 0.8.10

Warning: Devices opened with shared lock will not have their

partition table automatically reloaded!

Partition table scan:

MBR: hybrid

BSD: not present

APM: not present

GPT: present

Found valid GPT with hybrid MBR; using GPT.

sudo gdisk /dev/disk1

GPT fdisk (gdisk) version 0.8.10

Warning: Devices opened with shared lock will not have their

partition table automatically reloaded!

Partition table scan:

MBR: hybrid

BSD: not present

APM: not present

GPT: present

Found valid GPT with hybrid MBR; using GPT.

After removed hybrid MBR

sudo gdisk /dev/disk0

GPT fdisk (gdisk) version 0.8.10

Warning: Devices opened with shared lock will not have their

partition table automatically reloaded!

Partition table scan:

MBR: protective

BSD: not present

APM: not present

GPT: present

Found valid GPT with protective MBR; using GPT.

sudo gdisk /dev/disk1

GPT fdisk (gdisk) version 0.8.10

Warning: Devices opened with shared lock will not have their

partition table automatically reloaded!

Partition table scan:

MBR: protective

BSD: not present

APM: not present

GPT: present

Found valid GPT with protective MBR; using GPT.

Can't find bootmgfw.efi in install.wim,so I download it from http://www.nextofwindows.com/how-to-make-uefi-bootable-usb-flash-drive-to-install-windows-8/

Without remove USB HybridMBR,boot to USB Clover,select bootmgfw.efi,get this

IMG_20150220_011416.jpg

Rremove USB HybridMBR,computer stuck at BIOS splash.Seems like computer cannot accept Pure GPT USB.

Use Rremoved SSD HybridMBR Clover to install USB WIN81.Said driver cannot find.Seems like SSD and USB EFI file cannot access.

Cannot install Windows 8 UEFI with Clover

The error might be due to the fact that the Windows installer is detecting other drives/windows installations and wants to do a startup repair. When installing Windows, it is good practice to temporarily disconnect all the hard drives except the target hard drive you want to install on eg in your case, if you want to install on disk0, disconnect disk1&2 leaving only disk0 and your UEFI Windows installer plugged in.

Re extracting bootmgfw.efi: Use 7-zip in Windows, open install.wim navigate to sources/install.wim/1/Windows/Boot/EFI/bootmgfw.efi and extract bootmgfw.efi. Place in the /efi/microsoft/boot folder of your UEFI Windows USB (& rename cdboot.efi to cdboot.BAK as described in post#6).

Some legacy BIOSes won't boot from a pure GPT USB (not a problem for Clover booting of pure GPT hard drive though). If this is the case with your system, you can either remake the USB installer with MBR instead of GPT or boot Clover installed on hard disk 0 to start bootmgfw.efi on the UEFI Windows installer.

maleorderbride · February 19, 2015

Yes, it is using dynamic relocation from low to high addresses.

You can't edit efi file. It is binary executable. You may edit sources and compile by yourself.

Garbage I forgot to clean.

1. I have installed CloverGrower, but am not sure how to compile the edit that I have made. Do I place my file in the edk2/Clover/OsxLowMemFixDrv folder and then run CloverGrower.command again, or how do I compile just this one .c file?

2. When attempting to build the .pkg using CloverGrower for the first time I receive the following error: (new error below, previous error bypassed)

Architecture(s)  = IA32
Build target     = RELEASE
Toolchain        = GCC49

Active Platform          = /Users/MacPro/src/edk2/Clover/Clover.dsc
Flash Image Definition   = /Users/MacPro/src/edk2/Clover/Clover.fdf

Processing meta-data ....... done!
Building ... /Users/MacPro/src/edk2/MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf [IA32]
Building ... /Users/MacPro/src/edk2/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf [IA32]
Building ... /Users/MacPro/src/edk2/MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf [IA32]
"gcc" -g -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-array-bounds -ffunction-sections -fdata-sections -c -include AutoGen.h -DSTRING_ARRAY_NAME=BasePcdLibNullStrings -m32 -malign-double -fno-stack-protector -D EFI32 -Wno-address -Wno-unused-but-set-variable -Os -DMDEPKG_NDEBUG -DCLOVER_BUILD     -DAMD_SUPPORT     -o /Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BasePcdLibNull/BasePcdLibNull/OUTPUT/./PcdLib.obj -I/Users/MacPro/src/edk2/MdePkg/Library/BasePcdLibNull -I/Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BasePcdLibNull/BasePcdLibNull/DEBUG -I/Users/MacPro/src/edk2/MdePkg -I/Users/MacPro/src/edk2/MdePkg/Include -I/Users/MacPro/src/edk2/MdePkg/Include/Ia32 /Users/MacPro/src/edk2/MdePkg/Library/BasePcdLibNull/PcdLib.c
"ar" -cr /Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BasePcdLibNull/BasePcdLibNull/OUTPUT/BasePcdLibNull.lib  @/Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BasePcdLibNull/BasePcdLibNull/OUTPUT/object_files.lst
Building ... /Users/MacPro/src/edk2/MdePkg/Library/BaseLib/BaseLib.inf [IA32]
ar: @/Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BasePcdLibNull/BasePcdLibNull/OUTPUT/object_files.lst: No such file or directory
make: *** [/Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BasePcdLibNull/BasePcdLibNull/OUTPUT/BasePcdLibNull.lib] Error 1
"gcc" -g -fshort-wchar -fno-strict-aliasing -Wall -Werror -Wno-array-bounds -ffunction-sections -fdata-sections -c -include AutoGen.h -DSTRING_ARRAY_NAME=BaseDebugLibNullStrings -m32 -malign-double -fno-stack-protector -D EFI32 -Wno-address -Wno-unused-but-set-variable -Os -DMDEPKG_NDEBUG -DCLOVER_BUILD     -DAMD_SUPPORT     -o /Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull/OUTPUT/./DebugLib.obj -I/Users/MacPro/src/edk2/MdePkg/Library/BaseDebugLibNull -I/Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull/DEBUG -I/Users/MacPro/src/edk2/MdePkg -I/Users/MacPro/src/edk2/MdePkg/Include -I/Users/MacPro/src/edk2/MdePkg/Include/Ia32 /Users/MacPro/src/edk2/MdePkg/Library/BaseDebugLibNull/DebugLib.c


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BasePcdLibNull/BasePcdLibNull]


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull]


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BaseMemoryLib/BaseMemoryLib]


build.py...
 : error 7000: Failed to execute command
	make tbuild [/Users/MacPro/src/edk2/Build/Clover/RELEASE_GCC49/IA32/MdePkg/Library/BaseLib/BaseLib]


build.py...
 : error F002: Failed to build module
	/Users/MacPro/src/edk2/MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf [IA32, GCC49, RELEASE]

- Failed -
Build end time: 20:00:38, Feb.19 2015
Build total time: 00:00:12

CloverGrower V6.26 Cloveria32_r3185 RELEASE  ERROR!!
Good Evening.

Slice · February 20, 2015

1. I have installed CloverGrower, but am not sure how to compile the edit that I have made. Do I place my file in the edk2/Clover/OsxLowMemFixDrv folder and then run CloverGrower.command again, or how do I compile just this one .c file?

2. When attempting to build the .pkg using CloverGrower for the first time I receive the following error: (new error below, previous error bypassed)
build.py...
 : error F002: Failed to build module
	/Users/MacPro/src/edk2/MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf [IA32, GCC49, RELEASE]

- Failed -
Build end time: 20:00:38, Feb.19 2015
Build total time: 00:00:12

CloverGrower V6.26 Cloveria32_r3185 RELEASE  ERROR!!
Good Evening.  

Good morning!

I am not sure if CloverGrower was follow recent Clover changes. It is not my affair.

I proposed other way #14

February 21, 2015

Hello guys!

I've been running Clover for a while and I love it a lot. The development team did a great job so far! I have a few questions, I hope you can answer some of them:

My laptop has no official support for UEFI, however someone managed in unlocking it and it now (mostly) works. There is an issue: if the BIOS is unlocked to support UEFI, Clover installed for UEFI and Windows is installed in UEFI-mode, the sound is not working (but if it were to be installed in legacy-mode, it would run with no problems). This is a BIOS problem, however fixing it would require reverse engineering a huge part of the BIOS so I was thinking that Clover might be able to fix this with a custom patch. Do you think this is possible?

Sometimes when I press random keys at startup, a gray screen appears with a few options ("Continue", "Select language", "Boot manager", etc.). What is it? Can I disable it?

Thank you very much!

VirusX · February 22, 2015

Does someone know what happened to projectosx?

There was a lot of content for clover. Even if the site may not come back, maybe someone have backups or could post some things here? For example I need some of dmazars posts for aptiofix and how to calculate right slide values.

I would also love to see the content included here somehow if that is possible.

I like the changelog topic at projectosx. With that information I always knew if a new clover version was 'worth' testing...

Mieze · February 22, 2015

I'm trying to find a way to use Clover to prevent AppleUpstreamUserClient.kext from loading because this kext triggers the system freeze when you open a HD movie prevue in the iTunes Store while using Intel HD4600 onboard graphics. With this kext removed iTunes still hangs when you open a HD movie prevue, but the OS isn't affected at all.

Patching the kext's Info.plist directly works. Changing:

<key>IOProviderClass</key>
<string>IOFramebuffer</string>

to

<key>IOProviderClass</key>
<string>IOFrameXXXXXX</string>

prevents AppleUpstreamUserClient from binding to the framebuffer so that it is unloaded. Problem solved, but I want to find a way to let Clover perform the patch so that it survives an OS X update. Removing the kext completely works too, but this has to be done manually too.

First I tried to use a Info.plist patch but as it isn't in the kernel cache, the patch won't be executed. Forcing it to load so that the patch is executed doesn't help. Although the kext gets loaded and the patch is executed (I verified it using the debug mode), this doesn't seem to have any effect. The kext still loads. Looks like the patched version in the cache isn't used anyway.

Is there any way to use Clover to remove a kext from /S/L/E or would it be possible for the developers to add it?

Mieze

Nick14 · February 22, 2015

A feature request :

USB Mouse support in clover , as it would help people who dualboots too choose os incase they use a bluetooth keyboard like I do

I would do it myself if someone could point me too where I can find some docs

blackosx · February 22, 2015

A USB mouse does work with legacy Clover, but AFAIK not with UEFI Clover.

http://www.insanelymac.com/forum/topic/282787-clover-v2-instructions/?p=1859444

liujianwei · February 23, 2015

for locating bootmgfw.efi open install.wim with 7-zip and navigate to Windows\Boot\EFI\ bootmgfw.efi ...

now for this error  IMG_20150220_011416.jpg

download Rufus  and set to GPT for UEFI Computer , FileSystem=NTFS see screenshot Screenshot (1).png

now copy  bootmgfw.efi to efi\microsoft\boot and rename cdboot.efi to cdboot.BAK

try to boot with bootmgfw.efi using Clover EFI , i have successfully installed this ..

Good luck

The error might be due to the fact that the Windows installer is detecting other drives/windows installations and wants to do a startup repair. When installing Windows, it is good practice to temporarily disconnect all the hard drives except the target hard drive you want to install on eg in your case, if you want to install on disk0, disconnect disk1&2 leaving only disk0 and your UEFI Windows installer plugged in.

Re extracting bootmgfw.efi: Use 7-zip in Windows, open install.wim navigate to sources/install.wim/1/Windows/Boot/EFI/bootmgfw.efi and extract bootmgfw.efi. Place in the /efi/microsoft/boot folder of your UEFI Windows USB (& rename cdboot.efi to cdboot.BAK as described in post#6).

Some legacy BIOSes won't boot from a pure GPT USB (not a problem for Clover booting of pure GPT hard drive though). If this is the case with your system, you can either remake the USB installer with MBR instead of GPT or boot Clover installed on hard disk 0 to start bootmgfw.efi on the UEFI Windows installer.

Seems like my computer is not Microsoft friendly,Windows 7 wake up from sleep,system stuck and slow,change windows 7 hdd to SATA port 1 problem solved,GDisk convert Hybrid MBR to GPT,I cannot convert back,I'm very regret to use Windows 98 ME 2000 XP 7 8 8.1 10 and Xbox 360 Controller and Sidewinder mouse.

Slice · February 23, 2015

@maleorderbride

You paste toooo much information. My browser hangs and I can't see all.

maleorderbride · February 23, 2015

@maleorderbride

You paste toooo much information. My browser hangs and I can't see all.

OK, here is the last few commands instead of all of it:

Finished building BaseTools C Tools with ARCH=X64
bash-3.2# cd Clover
bash-3.2# ./buildgettext.sh

Status: gettext-latest.tar.gz not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 16.8M  100 16.8M    0     0  4137k      0  0:00:04  0:00:04 --:--:-- 4138k
- Creating new RAM disk

Initialized /dev/rdisk3 as a 300 MB case-insensitive HFS Plus volume
-  gettext-latest extract...
-  gettext-latest configure...
-  gettext-latest make...
-  gettext-latest installing...
-  gettext-latest installed in /Users/MacPro/src/opt/local

- Ejecting RAM disk
"disk3" unmounted.
"disk3" ejected.
bash-3.2# ./buildgcc-4.9.sh
- Building GCC toolchain for x64
  Running on Mac OS X 10.10, with x86_64 architecture.
  Using Xcode SDK: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk
Status: gmp-6.0.0a not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 2265k  100 2265k    0     0   815k      0  0:00:02  0:00:02 --:--:--  815k
Status: mpfr-3.1.2 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 1196k  100 1196k    0     0   490k      0  0:00:02  0:00:02 --:--:--  490k
Status: mpc-1.0.2 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  618k  100  618k    0     0   268k      0  0:00:02  0:00:02 --:--:--  268k
Status: isl-0.14 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 1367k  100 1367k    0     0  1392k      0 --:--:-- --:--:-- --:--:-- 1392k
Status: cloog-0.18.1 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 3766k  100 3766k    0     0  2313k      0  0:00:01  0:00:01 --:--:-- 2313k
Status: binutils-2.25 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 22.9M  100 22.9M    0     0  3369k      0  0:00:06  0:00:06 --:--:-- 4686k
Status: gcc-4.9.2 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 85.7M    0 85.7M    0     0   120k      0 --:--:--  0:12:08 --:--:-- 96235
- Creating new RAM disk
Initialized /dev/rdisk3 as a 2 GB case-insensitive HFS Plus volume

- gmp-6.0.0a extracting...
- gmp-6.0.0a extracted
- gmp-6.0.0a configure...
- gmp-6.0.0a make...
- gmp-6.0.0a installed in /Users/MacPro/src/opt/local
- mpfr-3.1.2 extracting...
- mpfr-3.1.2 extracted
- mpfr-3.1.2 configure...
- mpfr-3.1.2 make...
- mpfr-3.1.2 installed in /Users/MacPro/src/opt/local
- mpc-1.0.2 extracting...
- mpc-1.0.2 extracted
- mpc-1.0.2 configure...
- mpc-1.0.2 make...
- mpc-1.0.2 installed in /Users/MacPro/src/opt/local
- isl-0.14 extracting...
- isl-0.14 extracted
- isl-0.14 configure...
- isl-0.14 make...
- isl-0.14 installed in /Users/MacPro/src/opt/local
- cloog-0.18.1 extracting...
- cloog-0.18.1 extracted
- cloog-0.18.1 configure...
- isl-0.14 reconfigure...
- isl-0.14 make...
- cloog-0.18.1 make...
- cloog-0.18.1 installed in /Users/MacPro/src/opt/local
- gcc-4.9.2 extracting...
- gcc-4.9.2 extracted
- gcc-4.9.2 (native) configure...
Error configuring GCC-4.9.2 ! Check the log /Users/MacPro/src/tools/logs/gcc-native.x64.configure.log.txt

- Ejecting RAM disk
"disk3" unmounted.
"disk3" ejected.
bash-3.2# cd .. 
bash-3.2# ./edksetup.sh
WORKSPACE: /Users/MacPro/src/edk2
EDK_TOOLS_PATH: /Users/MacPro/src/edk2/BaseTools
Copying $EDK_TOOLS_PATH/Conf/build_rule.template
     to $WORKSPACE/Conf/build_rule.txt
Copying $EDK_TOOLS_PATH/Conf/tools_def.template
     to $WORKSPACE/Conf/tools_def.txt
Copying $EDK_TOOLS_PATH/Conf/target.template
     to $WORKSPACE/Conf/target.txt
bash-3.2# cp -R Clover/Patches_for_EDK2/* ./
bash-3.2# ./ebuild.sh --low-ebda
bash: ./ebuild.sh: No such file or directory
bash-3.2#

insanelyDeepak · February 24, 2015

First of all Thanks to Slice and Clover Team for a such powerfull bootloader ..

i was suffering from sleep wake issue from Chameleon and Clover was new , tried all SSDT ,DSDT , Kext Patches etc but not successfull but now i'm with Yosemite 10.10.2 having a second generation Sandy CPU and H61 Mobo of Gigabyte ..now i noticed it worked automatically without any efforts just need to add DSDT Patches on fly ..it started working perfectly and awesomely ..changes have noticed from Clover r3168 to 3185

Thank you very much

PS: i don't know where to write doing here ..

Slice · February 24, 2015

OK, here is the last few commands instead of all of it:

Finished building BaseTools C Tools with ARCH=X64
bash-3.2# cd Clover
bash-3.2# ./buildgettext.sh

Status: gettext-latest.tar.gz not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 16.8M  100 16.8M    0     0  4137k      0  0:00:04  0:00:04 --:--:-- 4138k
- Creating new RAM disk

Initialized /dev/rdisk3 as a 300 MB case-insensitive HFS Plus volume
-  gettext-latest extract...
-  gettext-latest configure...
-  gettext-latest make...
-  gettext-latest installing...
-  gettext-latest installed in /Users/MacPro/src/opt/local

- Ejecting RAM disk
"disk3" unmounted.
"disk3" ejected.
bash-3.2# ./buildgcc-4.9.sh
- Building GCC toolchain for x64
  Running on Mac OS X 10.10, with x86_64 architecture.
  Using Xcode SDK: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk
Status: gmp-6.0.0a not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 2265k  100 2265k    0     0   815k      0  0:00:02  0:00:02 --:--:--  815k
Status: mpfr-3.1.2 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 1196k  100 1196k    0     0   490k      0  0:00:02  0:00:02 --:--:--  490k
Status: mpc-1.0.2 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  618k  100  618k    0     0   268k      0  0:00:02  0:00:02 --:--:--  268k
Status: isl-0.14 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 1367k  100 1367k    0     0  1392k      0 --:--:-- --:--:-- --:--:-- 1392k
Status: cloog-0.18.1 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 3766k  100 3766k    0     0  2313k      0  0:00:01  0:00:01 --:--:-- 2313k
Status: binutils-2.25 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 22.9M  100 22.9M    0     0  3369k      0  0:00:06  0:00:06 --:--:-- 4686k
Status: gcc-4.9.2 not found.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 85.7M    0 85.7M    0     0   120k      0 --:--:--  0:12:08 --:--:-- 96235
- Creating new RAM disk
Initialized /dev/rdisk3 as a 2 GB case-insensitive HFS Plus volume

- gmp-6.0.0a extracting...
- gmp-6.0.0a extracted
- gmp-6.0.0a configure...
- gmp-6.0.0a make...
- gmp-6.0.0a installed in /Users/MacPro/src/opt/local
- mpfr-3.1.2 extracting...
- mpfr-3.1.2 extracted
- mpfr-3.1.2 configure...
- mpfr-3.1.2 make...
- mpfr-3.1.2 installed in /Users/MacPro/src/opt/local
- mpc-1.0.2 extracting...
- mpc-1.0.2 extracted
- mpc-1.0.2 configure...
- mpc-1.0.2 make...
- mpc-1.0.2 installed in /Users/MacPro/src/opt/local
- isl-0.14 extracting...
- isl-0.14 extracted
- isl-0.14 configure...
- isl-0.14 make...
- isl-0.14 installed in /Users/MacPro/src/opt/local
- cloog-0.18.1 extracting...
- cloog-0.18.1 extracted
- cloog-0.18.1 configure...
- isl-0.14 reconfigure...
- isl-0.14 make...
- cloog-0.18.1 make...
- cloog-0.18.1 installed in /Users/MacPro/src/opt/local
- gcc-4.9.2 extracting...
- gcc-4.9.2 extracted
- gcc-4.9.2 (native) configure...
Error configuring GCC-4.9.2 ! Check the log /Users/MacPro/src/tools/logs/gcc-native.x64.configure.log.txt

- Ejecting RAM disk
"disk3" unmounted.
"disk3" ejected.
bash-3.2# cd .. 
bash-3.2# ./edksetup.sh
WORKSPACE: /Users/MacPro/src/edk2
EDK_TOOLS_PATH: /Users/MacPro/src/edk2/BaseTools
Copying $EDK_TOOLS_PATH/Conf/build_rule.template
     to $WORKSPACE/Conf/build_rule.txt
Copying $EDK_TOOLS_PATH/Conf/tools_def.template
     to $WORKSPACE/Conf/tools_def.txt
Copying $EDK_TOOLS_PATH/Conf/target.template
     to $WORKSPACE/Conf/target.txt
bash-3.2# cp -R Clover/Patches_for_EDK2/* ./
bash-3.2# ./ebuild.sh --low-ebda
bash: ./ebuild.sh: No such file or directory
bash-3.2#

Two mistakes

1.

- gcc-4.9.2 (native) configure...
Error configuring GCC-4.9.2 ! Check the log /Users/MacPro/src/tools/logs/gcc-native.x64.configure.log.txt

it will be better if you upload those log.

2.

bash: ./ebuild.sh: No such file or directory

Man, this error means the file is not found in the current folder. What is your current folder? I think it is edk2 as previous command work.

You must do

cd Clover

PS. I deleted your dangerous post for other people may read the thread.

ericw12 · February 24, 2015

Maybe this is a feature request, or it would be OK if anyone knows any other way to do this.

For some of Nvidia cards, like Geforce GTX 460M, 560M..., after OSX 10.9.3, we need patch /S*/L*/E*/AppleGraphicsControl.kext/C*/P*/AppleGraphicsDevicePolicy.kext/C*/Info.plist to add these two lines, or we will get blackscreen:

Anyway Clover can make this happen automatically? the Clover info.plist patching does not work for this. Wondering if there is a way to enable this automatically so we can have a vanilla working install.

fffeee · February 24, 2015

OK, here is the last few commands instead of all of it:

- gcc-4.9.2 extracted
- gcc-4.9.2 (native) configure...
Error configuring GCC-4.9.2 ! Check the log /Users/MacPro/src/tools/logs/gcc-native.x64.configure.log.txt

You could have stopped there. Read that file.

Zenith432 · February 24, 2015

I got this error too while running buildgcc-4.9.sh today. I don't have the logs anymore, but it's this sequence

- cloog-0.18.1 extracting...
- cloog-0.18.1 extracted
- cloog-0.18.1 configure...
- isl-0.14 reconfigure...
- isl-0.14 make...
- cloog-0.18.1 make...
- cloog-0.18.1 installed in /Users/MacPro/src/opt/local
- gcc-4.9.2 extracting...
- gcc-4.9.2 extracted
- gcc-4.9.2 (native) configure...
Error configuring GCC-4.9.2 ! Check the log /Users/MacPro/src/tools/logs/gcc-native.x64.configure.log.txt

For some reason, after running cloog configure, it reruns isl configure instead of directly running cloog make. Looking at buildgcc-4.9.sh, that's not what should happen, and I can't figure out why it's happening. Anyway, the make command for cloog does not get run, the cloog.x64.make... log file is empty. Then later, gcc configure can't find cloog (because it wasn't make-d and make-installed), and its configure fails trying to find cloog.

I ended up building and installing cloog manually. So I don't know what's wrong with the build script.

- gcc-4.9.2 (native) configure...
Error configuring GCC-4.9.2 ! Check the log /Users/MacPro/src/tools/logs/gcc-native.x64.configure.log.txt

it will be better if you upload those log.

Slice · February 24, 2015

I got this error too while running buildgcc-4.9.sh today. I don't have the logs anymore, but it's this sequence
- cloog-0.18.1 extracting...
- cloog-0.18.1 extracted
- cloog-0.18.1 configure...
- isl-0.14 reconfigure...
- isl-0.14 make...
- cloog-0.18.1 make...
- cloog-0.18.1 installed in /Users/MacPro/src/opt/local
- gcc-4.9.2 extracting...
- gcc-4.9.2 extracted
- gcc-4.9.2 (native) configure...
Error configuring GCC-4.9.2 ! Check the log /Users/MacPro/src/tools/logs/gcc-native.x64.configure.log.txt
For some reason, after running cloog configure, it reruns isl configure instead of directly running cloog make. Looking at buildgcc-4.9.sh, that's not what should happen, and I can't figure out why it's happening. Anyway, the make command for cloog does not get run, the cloog.x64.make... log file is empty. Then later, gcc configure can't find cloog (because it wasn't make-d and make-installed), and its configure fails trying to find cloog.

I ended up building and installing cloog manually. So I don't know what's wrong with the build script.

isl version changed from 0.12.2 when it worked to 0.14 with the problem.

Test, please,

./buildgcc4.9.sh line 37

export ISL_VERSION=${ISL_VERSION:-isl-0.14}

change to …-0.12.2

maleorderbride · February 24, 2015

isl version changed from 0.12.2 when it worked to 0.14 with the problem.

Test, please,

./buildgcc4.9.sh line 37
export ISL_VERSION=${ISL_VERSION:-isl-0.14}
change to …-0.12.2

I re-ran ./buildgcc4.9.sh and got past the error, but still have a problem with:

bash-3.2# ./ebuild.sh --low-ebda -mc

TOOLCHAIN_DIR: /Users/MacPro/src/opt/local

Unrecognized option `--low-ebda'

Looking at the ebuild.sh, there is no --low-eba as an option any more.

./ebuild.sh -x64 does not seem to hit any errors, but I cannot do either of the --low-eba steps.

Attempting to make the package succeeds though. Good enough?

How can I now include my version of OsxLowMemFixDrv.c to be compiled instead of the stock version?

eidt: nm, just replacing the version in edk2/Clover/OsxLowMemFixDrv/

Thanks Slice!

Slice · February 25, 2015

Yes, --low-ebda is obsolete. You should exclude it.

droples · February 25, 2015

isl version changed from 0.12.2 when it worked to 0.14 with the problem.

Test, please,

./buildgcc4.9.sh line 37
export ISL_VERSION=${ISL_VERSION:-isl-0.14}
change to …-0.12.2

Thanks! So everything is compiled.

IMac122:Clover droplets$ ./buildgcc-4.9.sh -x64 -all
- Building GCC toolchain for x64
  Running on Mac OS X 10.10, with x86_64 architecture.
  Using Xcode SDK: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk
- Creating new RAM disk
Initialized /dev/rdisk2 as a 2 GB case-insensitive HFS Plus volume
- gmp-6.0.0a extracting...
- gmp-6.0.0a extracted
- gmp-6.0.0a configure...
- gmp-6.0.0a make...
- gmp-6.0.0a installed in /Users/droplets/src/opt/local
- mpfr-3.1.2 extracting...
- mpfr-3.1.2 extracted
- mpfr-3.1.2 configure...
- mpfr-3.1.2 make...
- mpfr-3.1.2 installed in /Users/droplets/src/opt/local
- mpc-1.0.2 extracting...
- mpc-1.0.2 extracted
- mpc-1.0.2 configure...
- mpc-1.0.2 make...
- mpc-1.0.2 installed in /Users/droplets/src/opt/local
- isl-0.12.2 extracting...
- isl-0.12.2 extracted
- isl-0.12.2 configure...
- isl-0.12.2 make...
- isl-0.12.2 installed in /Users/droplets/src/opt/local
- cloog-0.18.1 extracting...
- cloog-0.18.1 extracted
- cloog-0.18.1 configure...
- isl-0.12.2 reconfigure...
- isl-0.12.2 make...
- cloog-0.18.1 make...
- cloog-0.18.1 installed in /Users/droplets/src/opt/local
- gcc-4.9.2 extracting...
- gcc-4.9.2 extracted
- gcc-4.9.2 (native) configure...
- gcc-4.9.2 (native) make...
- gcc-4.9.2 (native) installing...
- Copying headers and library files...
- gcc-4.9.2 installed in /Users/droplets/src/opt/local
- binutils-2.25 extracting...
- binutils-2.25 extracted
- binutils-2.25 configure...
- binutils-2.25 make...
- binutils-2.25 installed in /Users/droplets/src/opt/local/cross
- gcc-4.9.2 configure...
- gcc-4.9.2 make...
- gcc-4.9.2 installed in /Users/droplets/src/opt/local/cross
* GCC toolchain Build process took 10m32s to complete...
- Ejecting RAM disk
"disk2" unmounted.
"disk2" ejected.

tluck · February 25, 2015

@mieze

There is a way to block a kext from starting. - besides kext patching which as you said means you must load it first edit it if only to make it not load!

The GUI Options menu allows one to enter a kext name to block it from starting. I don't know how to do this from the config.plist. It would be handy.

artur_pt · February 26, 2015

isl version changed from 0.12.2 when it worked to 0.14 with the problem.

Test, please,

./buildgcc4.9.sh line 37
export ISL_VERSION=${ISL_VERSION:-isl-0.14}
change to …-0.12.2

hello Slice

i compile 3185 with 0.14 without problems

thanks

oswaldini · February 27, 2015

What with FileVault support ? https://github.com/Piker-Alpha/macosxbootloader/blob/master/src/boot/FileVault.cpp

Zenith432 · February 27, 2015

Yes, but can you build the toolchain with buildgcc-4.9.sh when isl set to 0.14???

i compile 3185 with 0.14 without problems

Clover General discussion

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites