jason761 Posted December 1, 2014 Share Posted December 1, 2014 See 0:100 0:000 Clover started with option to boot bootmgfw.efi from EFI Check instructions #45 I followed the instructions but Clover still wont auto boot OS X. The bootmgfw.efi is located in EFI/Microsoft/Boot/. Idk why its loading EFI from that folder. Im not sure if I have real NVRAM so it might be an issue. 0:100 0:100 MemLog inited, TSC freq: 3400022970 0:100 0:000 0:100 0:000 Now is 1.12.2014, 5:54:57 (GMT+2047) 0:100 0:000 Starting Clover rev 3033 on American Megatrends EFI 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) @D1A48518 0:100 0:000 SelfDirPath = \EFI\CLOVER 0:100 0:000 Total Memory Slots Count = 4 0:100 0:000 Type 17 Index = 0 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 0:100 0:000 Type 17 Index = 1 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1 0:100 0:000 Type 17 Index = 2 0:100 0:000 Table has error information, checking 0:100 0:000 Found memory information in table 18/2, type=0x3, operation=0x2 syndrome=0x0 0:100 0:000 ...memory OK 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 0:100 0:000 Type 17 Index = 3 0:100 0:000 SmbiosTable.Type17->Speed = 1600MHz 0:100 0:000 SmbiosTable.Type17->Size = 4096MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1 0:100 0:000 Boot status=0 0:100 0:000 Clover revision: 3033 running on System Product Name 0:100 0:000 ... with board P8Z77-V PRO 0:100 0:000 Clover load options size = 40 bytes 0:100 0:000 Clover started with option to boot bootmgfw.efi from EFI 0:103 0:003 Using OEM config.plist at path: EFI\CLOVER\config.plist 0:104 0:000 EFI\CLOVER\config.plist loaded: Success 0:106 0:002 Found theme yosemitelogin 0:109 0:003 Found theme christmas 0:112 0:002 Found theme NEWYEAR 0:114 0:002 Loading early settings 0:114 0:000 timeout set to 2 0:114 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:114 0:000 KextsToPatch: 5 requested 0:114 0:000 KextToPatch 0: IOAHCIBlockStorage (TRIM Enabler) Kext bin patch, data len: 11 0:114 0:000 KextToPatch 1: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8 0:114 0:000 KextToPatch 2: AppleHDA (t1-10.9/AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6 0:114 0:000 KextToPatch 3: AppleHDA (t1-10.9/AppleHDA/Realtek ALC892) Kext bin patch, data len: 4 0:114 0:000 KextToPatch 4: AppleHDA (t1-10.9/AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6 0:114 0:000 Default theme: yosemitelogin 0:114 0:000 Hiding entries with string BOOTX64.EFI 0:114 0:000 Hiding entries with string Windows 0:114 0:000 LoadDrivers() start 0:116 0:002 Loading CsmVideoDxe-64.efi 0:117 0:000 load image status=Success 0:117 0:000 - driver needs connecting 0:117 0:000 Loading EmuVariableUefi-64.efi 0:117 0:000 load image status=Success 0:117 0:000 EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success 0:118 0:000 Loading FSInject-64.efi 0:118 0:000 load image status=Success 0:118 0:000 Loading OsxAptioFixDrv-64.efi 0:119 0:000 load image status=Success 0:119 0:000 Loading OsxFatBinaryDrv-64.efi 0:120 0:000 load image status=Success 0:120 0:000 Loading VBoxHfs-64.efi 0:120 0:000 load image status=Success 0:120 0:000 - driver needs connecting 0:120 0:000 2 drivers needs connecting ... 0:120 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:120 0:000 Video driver loaded: disconnect Success 0:802 0:681 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 0:820 0:018 CsmVideoDriverBindingStart 0:820 0:000 mixed support=40010 0:820 0:000 Controller is [030000] 0:820 0:000 Check for VBE 0:826 0:005 found Detail Timing 1920x1080 0:838 0:012 0 1152x864 attr=BB - ok, edid+, working, highest, pref=0 0:839 0:000 1 1280x960 attr=BB - ok, edid+, working, highest, pref=1 0:840 0:000 2 640x480 attr=BB - ok, edid+, 640x480, working 0:840 0:000 3 800x600 attr=BB - ok, edid+, 800x600, working 0:841 0:000 4 1024x768 attr=BB - ok, edid+, 1024x768, working 0:841 0:000 5 1280x1024 attr=BB - ok, edid+, working, highest, pref=5 0:843 0:002 6 1400x1050 attr=BB - ok, edid- 0:854 0:011 7 1920x1080 attr=BB - ok, edid+, working, highest, pref=7 0:854 0:000 CsmVideo: New mode: 7 1920x1080 - set 0:930 0:075 - SetMode pref 7 (7) = Success 0:930 0:000 CsmVideoCheckForVbe - Success 0:930 0:000 CsmVideoDriverBindingStart end Success 0:930 0:000 CsmVideo: New mode: 4 1024x768 - blocking that switch 0:935 0:005 CsmVideo: New mode: 8 -1625525372x-1692448513- EFI_UNSUPPORTED 1:033 0:097 LoadDrivers() end 1:033 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 1:054 0:021 SetScreenResolution: 1920x1080 - already set 1:054 0:000 Console modes reported: 3, available modes: 1:054 0:000 Mode 1: 80x25 (current mode) 1:054 0:000 Mode 2: 80x50 1:054 0:000 Mode 3: 100x31 1:054 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 1:054 0:000 CPU Vendor = 756E6547 Model=306A9 1:054 0:000 The CPU supported turbo 1:054 0:000 BrandString = Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz 1:054 0:000 MSR 0xE2 before patch 1E000400 1:054 0:000 MSR 0xE4 00000414 1:054 0:000 MSR 0xCE 00081010_F0012200 1:054 0:000 non-usable FLEX_RATIO = F0000 1:054 0:000 corrected FLEX_RATIO = E0000 1:054 0:000 MSR 0x1B0 00000000 1:054 0:000 FSBFrequency=100MHz DMIvalue=100000kHz 1:054 0:000 Corrected FSBFrequency=100MHz 1:054 0:000 Vendor/Model/Stepping: 0x756E6547/0x3A/0x9 1:054 0:000 Family/ExtFamily: 0x6/0x0 1:054 0:000 MaxDiv/MinDiv: 34.0/16 1:054 0:000 Turbo: 42/42/42/42 1:054 0:000 Features: 0xBFEBFBFF 1:054 0:000 Threads: 4 1:054 0:000 Cores: 4 1:054 0:000 FSB: 100 MHz 1:054 0:000 CPU: 3418 MHz 1:054 0:000 TSC: 3418 MHz 1:054 0:000 PIS: 400 MHz 1:054 0:000 PCI (00|00:00.00) : 8086 0150 class=060000 1:054 0:000 PCI (00|00:01.00) : 8086 0151 class=060400 1:054 0:000 PCI (00|01:00.00) : 1002 6818 class=030000 1:054 0:000 Found Radeon model=AMD Radeon HD 7870 Series 1:054 0:000 PCI (00|01:00.01) : 1002 AAB0 class=040300 1:054 0:000 PCI (00|00:14.00) : 8086 1E31 class=0C0330 1:054 0:000 PCI (00|00:16.00) : 8086 1E3A class=078000 1:054 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF 1:054 0:000 PCI (00|00:19.00) : 8086 1503 class=020000 1:054 0:000 PCI (00|00:1A.00) : 8086 1E2D class=0C0320 1:054 0:000 PCI (00|00:1B.00) : 8086 1E20 class=040300 1:054 0:000 PCI (00|00:1C.00) : 8086 1E10 class=060400 1:054 0:000 PCI (00|00:1C.04) : 8086 244E class=060401 1:054 0:000 PCI (00|03:00.00) : 1B21 1080 class=060401 1:054 0:000 PCI (00|00:1C.06) : 8086 1E1C class=060400 1:054 0:000 PCI (00|05:00.00) : 168C 0032 class=028000 1:054 0:000 PCI (00|00:1D.00) : 8086 1E26 class=0C0320 1:054 0:000 PCI (00|00:1F.00) : 8086 1E44 class=060100 1:054 0:000 PCI (00|00:1F.02) : 8086 1E02 class=010601 1:054 0:000 PCI (00|00:1F.03) : 8086 1E22 class=0C0500 1:054 0:000 PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF 1:054 0:000 ScanSPD() start 1:054 0:000 SMBus CmdReg: 0x3 1:054 0:000 Scanning SMBus [8086:1E22], mmio: 0xF7F35004, ioport: 0xF000, hostc: 0x1 1:069 0:014 SPD[0]: Type 11 @0x50 1:077 0:008 Found module with XMP version 1.2XMP Profile1: 10*1/8ns 1:077 0:000 Using XMP Profile1 instead of standard frequency 1600MHz 1:077 0:000 DDR speed 1600MHz 1:077 0:000 Slot: 0 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 1:092 0:014 SPD[1]: Type 11 @0x51 1:100 0:008 Found module with XMP version 1.2XMP Profile1: 10*1/8ns 1:100 0:000 Using XMP Profile1 instead of standard frequency 1600MHz 1:100 0:000 DDR speed 1600MHz 1:100 0:000 Slot: 1 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 1:115 0:014 SPD[2]: Type 11 @0x52 1:123 0:008 Found module with XMP version 1.2XMP Profile1: 10*1/8ns 1:123 0:000 Using XMP Profile1 instead of standard frequency 1600MHz 1:123 0:000 DDR speed 1600MHz 1:123 0:000 Slot: 2 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 1:137 0:014 SPD[3]: Type 11 @0x53 1:146 0:008 Found module with XMP version 1.2XMP Profile1: 10*1/8ns 1:146 0:000 Using XMP Profile1 instead of standard frequency 1600MHz 1:146 0:000 DDR speed 1600MHz 1:146 0:000 Slot: 3 Type 24 4096MB 1600MHz Vendor=G Skill Intl PartNo=F3-12800CL9-4GBXL SerialNo=0000000000000000 1:178 0:032 SPD[7]: Type 90 @0x57 1:275 0:096 ScanSPD() end 1:275 0:000 Get Acpi Tables List from RSDT: 1:275 0:000 Found table: FACP A M I len=132 1:275 0:000 Found table: APIC A M I len=114 1:275 0:000 Found table: FPDT A M I len=68 1:275 0:000 Found table: MCFG A M I len=60 1:275 0:000 Found table: HPET A M I len=56 1:275 0:000 Found table: SSDT SataTabl len=877 1:275 0:000 Found table: BGRT A M I len=56 1:275 0:000 Found table: SSDT Cpu0Ist len=2474 1:275 0:000 Found table: SSDT CpuPm len=2706 1:275 0:000 Calibrated TSC frequency =3400022970 =3400MHz 1:275 0:000 Loading main settings 1:275 0:000 Dropping 3 tables 1:275 0:000 Drop table 0 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043) 1:275 0:000 set table: 54445353, 74734930757043 to drop: true 1:275 0:000 1:275 0:000 Drop table 1 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043) 1:275 0:000 set table: 54445353, 6D50757043 to drop: true 1:275 0:000 1:275 0:000 Drop table 2 signature="DMAR" (52414D44) 1:275 0:000 set table: 52414D44, 0 to drop: 1:275 0:000 Config set ChassisType=0xD 1:275 0:000 found 11 volumes with blockIO 1:275 0:000 0. Volume: 1:275 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 1:277 0:002 Result of bootcode detection: bootable unknown (legacy) 1:277 0:000 1. Volume: 1:277 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 1:278 0:000 Result of bootcode detection: bootable Windows (vista,win) 1:278 0:000 2. Volume: 1:278 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 1:278 0:000 3. Volume: 1:278 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 1:278 0:000 found optical drive 1:278 0:000 4. Volume: 1:278 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0) 1:279 0:000 5. Volume: 1:279 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000) 1:280 0:000 Result of bootcode detection: bootable Windows (vista,win) 1:280 0:000 6. Volume: 1:280 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 1:280 0:000 Result of bootcode detection: bootable unknown (legacy) 1:285 0:005 This is SelfVolume !! 1:285 0:000 7. Volume: 1:285 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68) 1:286 0:000 8. Volume: 1:286 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20) 1:286 0:000 9. Volume: 1:286 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000) 1:295 0:008 Result of bootcode detection: bootable unknown (legacy) 1:295 0:000 10. Volume: 1:295 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000) 1:296 0:000 Result of bootcode detection: bootable Windows (win) 1:299 0:003 Loading nvram.plist from Vol 'MacSSD' - loaded, size=811 1:299 0:000 PutNvramPlistToRtVars ... 1:299 0:000 Skipping EmuVariableUefiPresent 1:299 0:000 Adding Key: LocationServicesEnabled: Data: Size = 1: Success 1:299 0:000 Adding Key: MyVar: Data: Size = 9: Success 1:299 0:000 Skipping OsxAptioFixDrv-RelocBase 1:299 0:000 Adding Key: SystemAudioVolume: Data: Size = 1: Success 1:299 0:000 Adding Key: SystemAudioVolumeDB: Data: Size = 1: Success 1:299 0:000 Adding Key: boot-gamma: Data: Size = 50: Success 1:299 0:000 Adding Key: fmm-computer-name: Data: Size = 14: Success 1:299 0:000 Adding Key: prev-lang:kbd: Data: Size = 5: Success 1:299 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none': Success 1:300 0:001 Using theme 'yosemitelogin' (EFI\CLOVER\themes\yosemitelogin) 1:300 0:000 OS main and drive as badge 1:305 0:004 font font.png loaded from themedir 1:305 0:000 Choosing theme yosemitelogin 1:305 0:000 Custom entries start 1:305 0:000 Custom entries finish 1:305 0:000 Scanning loaders... 1:305 0:000 0: 'Whole Disc Boot' no file system 1:305 0:000 1: 'Whole Disc Boot' no file system 1:305 0:000 2: 'Whole Disc Boot' no file system 1:305 0:000 3: 'Whole Disc Boot' no file system 1:305 0:000 4: 'Whole Disc Boot' no file system 1:305 0:000 5: 'Legacy HD1' no file system 1:305 0:000 6: 'EFI' 1:309 0:004 AddLoaderEntry for Volume Name=EFI 1:332 0:022 7: 'MacSSD' 1:334 0:002 AddLoaderEntry for Volume Name=MacSSD 1:336 0:001 Check if volume Is Hibernated: 1:336 0:000 Check sleep image 'by signature': 1:342 0:005 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 1:342 0:000 SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage' 1:346 0:004 Reading first 512 bytes of sleepimage ... 1:347 0:000 OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512) 1:347 0:000 sig lion: 0 1:347 0:000 sig snow: 0 1:347 0:000 no valid sleep image offset was found 1:347 0:000 Reading completed -> Success 1:347 0:000 sleepimage offset could not be acquired 1:347 0:000 hibernated: no - sign 1:358 0:011 8: 'Recovery HD' 1:359 0:000 AddLoaderEntry for Volume Name=Recovery HD 1:368 0:009 9: 'Legacy HD1' no file system 1:368 0:000 10: 'Legacy HD1' no file system 1:368 0:000 Custom legacy start 1:368 0:000 Custom legacy end 1:368 0:000 Custom tool start 1:368 0:000 Custom tool end 1:373 0:004 found tool \EFI\CLOVER\tools\Shell64U.efi 1:373 0:000 Checking EFI partition Volume 6 for Clover 1:374 0:000 Found Clover 1:374 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 1:378 0:003 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 1:399 0:021 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 1:399 0:000 EfiBootVolume not found 1:399 0:000 Default boot entry not found 1:399 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 1:399 0:000 DefaultIndex=-1 and MainMenu.EntryCount=9 1:715 0:315 GUI ready 6:222 4:507 Boot options: ------------- 6:222 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 6:223 0:000 0) Boot0001: Clover start bootmgfw.efi at EFI, Attr: 0x1 6:223 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 6:223 0:000 Size: 214 (Attr:4 + FPl:2 + Desc:66 + FP:102 + Opt:40 = 214 -> OK) 6:223 0:000 1) Boot0002: Clover start boot.efi at MacSSD, Attr: 0x1 6:223 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 6:223 0:000 Size: 210 (Attr:4 + FPl:2 + Desc:64 + FP:102 + Opt:38 = 210 -> OK) 6:223 0:000 2) Boot0003: Clover start boot.efi at Recovery HD, Attr: 0x1 6:223 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 6:223 0:000 Size: 230 (Attr:4 + FPl:2 + Desc:74 + FP:102 + Opt:48 = 230 -> OK) 6:223 0:000 3) Boot0000: Windows Boot Manager, Attr: 0x1 6:223 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 6:223 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 6:223 0:000 ------------- 6:223 0:000 DeleteBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 6:223 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 6:223 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 6:223 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 6:223 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 6:224 0:000 FindBootOptionForFile: Found Boot0001, at index 0 6:224 0:000 deleted option: 0001 6:224 0:000 DeleteBootOption: Boot0001 6:224 0:000 Boot0001 deleted 6:224 0:000 DeleteFromBootOrder: 0001 6:224 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 6:224 0:000 found at index 0 6:228 0:003 SetVariable: BootOrder = Success 6:228 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 6:228 0:000 BootOrder: 3: Boot0002, Boot0003, Boot0000 6:228 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 6:228 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 6:229 0:000 FindBootOptionForFile: Found Boot0002, at index 0 6:229 0:000 deleted option: 0002 6:229 0:000 DeleteBootOption: Boot0002 6:229 0:000 Boot0002 deleted 6:229 0:000 DeleteFromBootOrder: 0002 6:229 0:000 BootOrder: 3: Boot0002, Boot0003, Boot0000 6:229 0:000 found at index 0 6:233 0:003 SetVariable: BootOrder = Success 6:233 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 6:233 0:000 BootOrder: 2: Boot0003, Boot0000 6:233 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 6:233 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 6:233 0:000 FindBootOptionForFile: Found Boot0003, at index 0 6:233 0:000 deleted option: 0003 6:233 0:000 DeleteBootOption: Boot0003 6:234 0:000 Boot0003 deleted 6:234 0:000 DeleteFromBootOrder: 0003 6:234 0:000 BootOrder: 2: Boot0003, Boot0000 6:234 0:000 found at index 0 6:238 0:003 SetVariable: BootOrder = Success 6:238 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 6:238 0:000 BootOrder: 1: Boot0000 6:238 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 6:238 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 6:238 0:000 FindBootOptionForFile: Not found. 6:238 0:000 Boot options: ------------- 6:238 0:000 BootOrder: 1: Boot0000 6:238 0:000 0) Boot0000: Windows Boot Manager, Attr: 0x1 6:238 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 6:238 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 6:238 0:000 ------------- 6:238 0:000 ReinitSelfLib after theme change 6:238 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 6:238 0:000 found 11 volumes with blockIO 6:238 0:000 0. Volume: 6:238 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 6:241 0:002 Result of bootcode detection: bootable unknown (legacy) 6:241 0:000 1. Volume: 6:241 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 6:242 0:000 Result of bootcode detection: bootable Windows (vista,win) 6:242 0:000 2. Volume: 6:242 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 6:243 0:001 3. Volume: 6:243 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 6:243 0:000 found optical drive 6:243 0:000 4. Volume: 6:243 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0) 6:244 0:000 5. Volume: 6:244 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000) 6:244 0:000 Result of bootcode detection: bootable Windows (vista,win) 6:244 0:000 6. Volume: 6:244 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 6:245 0:000 Result of bootcode detection: bootable unknown (legacy) 6:245 0:000 This is SelfVolume !! 6:245 0:000 7. Volume: 6:245 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68) 6:245 0:000 8. Volume: 6:245 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20) 6:246 0:000 9. Volume: 6:246 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000) 6:247 0:000 Result of bootcode detection: bootable unknown (legacy) 6:247 0:000 10. Volume: 6:247 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000) 6:247 0:000 Result of bootcode detection: bootable Windows (win) 6:247 0:000 Choosing theme yosemitelogin 6:247 0:000 Custom entries start 6:247 0:000 Custom entries finish 6:247 0:000 Scanning loaders... 6:247 0:000 0: 'Whole Disc Boot' no file system 6:247 0:000 1: 'Whole Disc Boot' no file system 6:247 0:000 2: 'Whole Disc Boot' no file system 6:247 0:000 3: 'Whole Disc Boot' no file system 6:247 0:000 4: 'Whole Disc Boot' no file system 6:247 0:000 5: 'Legacy HD1' no file system 6:247 0:000 6: 'EFI' 6:250 0:002 AddLoaderEntry for Volume Name=EFI 6:261 0:011 7: 'MacSSD' 6:262 0:000 AddLoaderEntry for Volume Name=MacSSD 6:262 0:000 Check if volume Is Hibernated: 6:262 0:000 Check sleep image 'by signature': 6:267 0:004 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 6:267 0:000 SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage' 6:271 0:004 Reading first 512 bytes of sleepimage ... 6:272 0:000 OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512) 6:272 0:000 sig lion: 0 6:272 0:000 sig snow: 0 6:272 0:000 no valid sleep image offset was found 6:272 0:000 Reading completed -> Success 6:272 0:000 sleepimage offset could not be acquired 6:272 0:000 hibernated: no - sign 6:282 0:009 8: 'Recovery HD' 6:282 0:000 AddLoaderEntry for Volume Name=Recovery HD 6:290 0:008 9: 'Legacy HD1' no file system 6:290 0:000 10: 'Legacy HD1' no file system 6:290 0:000 Custom legacy start 6:290 0:000 Custom legacy end 6:290 0:000 Custom tool start 6:290 0:000 Custom tool end 6:290 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 6:290 0:000 Checking EFI partition Volume 6 for Clover 6:292 0:001 Found Clover 6:292 0:000 EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored 6:292 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 6:312 0:020 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 6:312 0:000 EfiBootVolume not found 6:312 0:000 Default boot entry not found 6:312 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 6:312 0:000 DefaultIndex=-1 and MainMenu.EntryCount=9 8:028 1:715 Boot options: ------------- 8:028 0:000 BootOrder: 1: Boot0000 8:029 0:000 0) Boot0000: Windows Boot Manager, Attr: 0x1 8:029 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 8:029 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 8:029 0:000 ------------- 8:029 0:000 AddBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI, ShortDevPath Clover start bootmgfw.efi at EFI, 0 8:029 0:000 AddBootOption: Clover start bootmgfw.efi at EFI 8:029 0:000 FilePath: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 8:029 0:000 BootIndex: 0 8:029 0:000 Found BootNum: 0001 8:064 0:035 Boot0001 saved 8:064 0:000 AddToBootOrder: Boot0001 at index 0 8:064 0:000 BootOrder: 1: Boot0000 8:068 0:003 SetVariable: BootOrder = Success 8:068 0:000 2: Boot0001, Boot0000 8:068 0:000 AddBootOptionForFile: done. 8:068 0:000 Entry 0 assigned option DB210001 8:068 0:000 AddBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI, ShortDevPath Clover start boot.efi at MacSSD, 1 8:068 0:000 AddBootOption: Clover start boot.efi at MacSSD 8:068 0:000 FilePath: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 8:068 0:000 BootIndex: 1 8:068 0:000 Found BootNum: 0002 8:103 0:034 Boot0002 saved 8:103 0:000 AddToBootOrder: Boot0002 at index 1 8:103 0:000 BootOrder: 2: Boot0001, Boot0000 8:107 0:004 SetVariable: BootOrder = Success 8:107 0:000 3: Boot0001, Boot0002, Boot0000 8:107 0:000 AddBootOptionForFile: done. 8:107 0:000 Entry 1 assigned option DB210002 8:107 0:000 AddBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI, ShortDevPath Clover start boot.efi at Recovery HD, 2 8:107 0:000 AddBootOption: Clover start boot.efi at Recovery HD 8:107 0:000 FilePath: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 8:107 0:000 BootIndex: 2 8:108 0:000 Found BootNum: 0003 8:146 0:037 Boot0003 saved 8:146 0:000 AddToBootOrder: Boot0003 at index 2 8:146 0:000 BootOrder: 3: Boot0001, Boot0002, Boot0000 8:150 0:004 SetVariable: BootOrder = Success 8:150 0:000 4: Boot0001, Boot0002, Boot0003, Boot0000 8:150 0:000 AddBootOptionForFile: done. 8:150 0:000 Entry 2 assigned option DB210003 8:150 0:000 Boot options: ------------- 8:150 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 8:151 0:000 0) Boot0001: Clover start bootmgfw.efi at EFI, Attr: 0x1 8:151 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 8:151 0:000 Size: 214 (Attr:4 + FPl:2 + Desc:66 + FP:102 + Opt:40 = 214 -> OK) 8:151 0:000 1) Boot0002: Clover start boot.efi at MacSSD, Attr: 0x1 8:151 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 8:151 0:000 Size: 210 (Attr:4 + FPl:2 + Desc:64 + FP:102 + Opt:38 = 210 -> OK) 8:151 0:000 2) Boot0003: Clover start boot.efi at Recovery HD, Attr: 0x1 8:151 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 8:151 0:000 Size: 230 (Attr:4 + FPl:2 + Desc:74 + FP:102 + Opt:48 = 230 -> OK) 8:151 0:000 3) Boot0000: Windows Boot Manager, Attr: 0x1 8:151 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 8:151 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 8:151 0:000 ------------- 8:151 0:000 ReinitSelfLib after theme change 8:151 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 8:151 0:000 found 11 volumes with blockIO 8:151 0:000 0. Volume: 8:151 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 8:154 0:003 Result of bootcode detection: bootable unknown (legacy) 8:154 0:000 1. Volume: 8:154 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 8:155 0:000 Result of bootcode detection: bootable Windows (vista,win) 8:155 0:000 2. Volume: 8:155 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 8:155 0:000 3. Volume: 8:155 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 8:155 0:000 found optical drive 8:155 0:000 4. Volume: 8:155 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0) 8:156 0:000 5. Volume: 8:156 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000) 8:157 0:000 Result of bootcode detection: bootable Windows (vista,win) 8:157 0:000 6. Volume: 8:157 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 8:157 0:000 Result of bootcode detection: bootable unknown (legacy) 8:157 0:000 This is SelfVolume !! 8:157 0:000 7. Volume: 8:157 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68) 8:158 0:000 8. Volume: 8:158 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20) 8:158 0:000 9. Volume: 8:158 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000) 8:159 0:000 Result of bootcode detection: bootable unknown (legacy) 8:159 0:000 10. Volume: 8:159 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000) 8:159 0:000 Result of bootcode detection: bootable Windows (win) 8:159 0:000 Choosing theme yosemitelogin 8:160 0:000 Custom entries start 8:160 0:000 Custom entries finish 8:160 0:000 Scanning loaders... 8:160 0:000 0: 'Whole Disc Boot' no file system 8:160 0:000 1: 'Whole Disc Boot' no file system 8:160 0:000 2: 'Whole Disc Boot' no file system 8:160 0:000 3: 'Whole Disc Boot' no file system 8:160 0:000 4: 'Whole Disc Boot' no file system 8:160 0:000 5: 'Legacy HD1' no file system 8:160 0:000 6: 'EFI' 8:160 0:000 AddLoaderEntry for Volume Name=EFI 8:168 0:008 7: 'MacSSD' 8:168 0:000 AddLoaderEntry for Volume Name=MacSSD 8:169 0:000 Check if volume Is Hibernated: 8:169 0:000 Check sleep image 'by signature': 8:174 0:004 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 8:174 0:000 SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage' 8:178 0:004 Reading first 512 bytes of sleepimage ... 8:179 0:000 OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512) 8:179 0:000 sig lion: 0 8:179 0:000 sig snow: 0 8:179 0:000 no valid sleep image offset was found 8:179 0:000 Reading completed -> Success 8:179 0:000 sleepimage offset could not be acquired 8:179 0:000 hibernated: no - sign 8:188 0:009 8: 'Recovery HD' 8:188 0:000 AddLoaderEntry for Volume Name=Recovery HD 8:197 0:008 9: 'Legacy HD1' no file system 8:197 0:000 10: 'Legacy HD1' no file system 8:197 0:000 Custom legacy start 8:197 0:000 Custom legacy end 8:197 0:000 Custom tool start 8:197 0:000 Custom tool end 8:197 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 8:197 0:000 Checking EFI partition Volume 6 for Clover 8:197 0:000 Found Clover 8:197 0:000 EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored 8:197 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 8:218 0:021 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 8:218 0:000 EfiBootVolume not found 8:218 0:000 Default boot entry not found 8:218 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 8:218 0:000 DefaultIndex=-1 and MainMenu.EntryCount=9 10:071 1:853 Boot options: ------------- 10:071 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 10:072 0:000 0) Boot0001: Clover start bootmgfw.efi at EFI, Attr: 0x1 10:072 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 10:072 0:000 Size: 214 (Attr:4 + FPl:2 + Desc:66 + FP:102 + Opt:40 = 214 -> OK) 10:072 0:000 1) Boot0002: Clover start boot.efi at MacSSD, Attr: 0x1 10:072 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 10:072 0:000 Size: 210 (Attr:4 + FPl:2 + Desc:64 + FP:102 + Opt:38 = 210 -> OK) 10:072 0:000 2) Boot0003: Clover start boot.efi at Recovery HD, Attr: 0x1 10:072 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 10:072 0:000 Size: 230 (Attr:4 + FPl:2 + Desc:74 + FP:102 + Opt:48 = 230 -> OK) 10:072 0:000 3) Boot0000: Windows Boot Manager, Attr: 0x1 10:072 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 10:072 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 10:072 0:000 ------------- 10:072 0:000 DeleteBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 10:072 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 10:072 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 10:072 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 10:072 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 10:073 0:000 FindBootOptionForFile: Found Boot0001, at index 0 10:073 0:000 deleted option: 0001 10:073 0:000 DeleteBootOption: Boot0001 10:073 0:000 Boot0001 deleted 10:073 0:000 DeleteFromBootOrder: 0001 10:073 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 10:073 0:000 found at index 0 10:077 0:003 SetVariable: BootOrder = Success 10:077 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 10:077 0:000 BootOrder: 3: Boot0002, Boot0003, Boot0000 10:077 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 10:077 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 10:078 0:000 FindBootOptionForFile: Found Boot0002, at index 0 10:078 0:000 deleted option: 0002 10:078 0:000 DeleteBootOption: Boot0002 10:078 0:000 Boot0002 deleted 10:078 0:000 DeleteFromBootOrder: 0002 10:078 0:000 BootOrder: 3: Boot0002, Boot0003, Boot0000 10:078 0:000 found at index 0 10:082 0:003 SetVariable: BootOrder = Success 10:082 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 10:082 0:000 BootOrder: 2: Boot0003, Boot0000 10:082 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 10:082 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 10:082 0:000 FindBootOptionForFile: Found Boot0003, at index 0 10:082 0:000 deleted option: 0003 10:082 0:000 DeleteBootOption: Boot0003 10:083 0:000 Boot0003 deleted 10:083 0:000 DeleteFromBootOrder: 0003 10:083 0:000 BootOrder: 2: Boot0003, Boot0000 10:083 0:000 found at index 0 10:086 0:003 SetVariable: BootOrder = Success 10:086 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 10:086 0:000 BootOrder: 1: Boot0000 10:087 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 10:087 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 10:087 0:000 FindBootOptionForFile: Not found. 10:087 0:000 Boot options: ------------- 10:087 0:000 BootOrder: 1: Boot0000 10:087 0:000 0) Boot0000: Windows Boot Manager, Attr: 0x1 10:087 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 10:087 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 10:087 0:000 ------------- 10:087 0:000 ReinitSelfLib after theme change 10:087 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 10:087 0:000 found 11 volumes with blockIO 10:087 0:000 0. Volume: 10:087 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 10:090 0:003 Result of bootcode detection: bootable unknown (legacy) 10:090 0:000 1. Volume: 10:090 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 10:091 0:000 Result of bootcode detection: bootable Windows (vista,win) 10:091 0:000 2. Volume: 10:091 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 10:091 0:000 3. Volume: 10:091 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 10:091 0:000 found optical drive 10:091 0:000 4. Volume: 10:091 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0) 10:092 0:000 5. Volume: 10:092 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000) 10:093 0:000 Result of bootcode detection: bootable Windows (vista,win) 10:093 0:000 6. Volume: 10:093 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 10:093 0:000 Result of bootcode detection: bootable unknown (legacy) 10:093 0:000 This is SelfVolume !! 10:093 0:000 7. Volume: 10:093 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68) 10:094 0:000 8. Volume: 10:094 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20) 10:094 0:000 9. Volume: 10:094 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000) 10:095 0:000 Result of bootcode detection: bootable unknown (legacy) 10:095 0:000 10. Volume: 10:095 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000) 10:095 0:000 Result of bootcode detection: bootable Windows (win) 10:095 0:000 Choosing theme yosemitelogin 10:096 0:000 Custom entries start 10:096 0:000 Custom entries finish 10:096 0:000 Scanning loaders... 10:096 0:000 0: 'Whole Disc Boot' no file system 10:096 0:000 1: 'Whole Disc Boot' no file system 10:096 0:000 2: 'Whole Disc Boot' no file system 10:096 0:000 3: 'Whole Disc Boot' no file system 10:096 0:000 4: 'Whole Disc Boot' no file system 10:096 0:000 5: 'Legacy HD1' no file system 10:096 0:000 6: 'EFI' 10:096 0:000 AddLoaderEntry for Volume Name=EFI 10:104 0:008 7: 'MacSSD' 10:104 0:000 AddLoaderEntry for Volume Name=MacSSD 10:105 0:000 Check if volume Is Hibernated: 10:105 0:000 Check sleep image 'by signature': 10:110 0:004 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 10:110 0:000 SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage' 10:114 0:004 Reading first 512 bytes of sleepimage ... 10:114 0:000 OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512) 10:114 0:000 sig lion: 0 10:114 0:000 sig snow: 0 10:114 0:000 no valid sleep image offset was found 10:114 0:000 Reading completed -> Success 10:115 0:000 sleepimage offset could not be acquired 10:115 0:000 hibernated: no - sign 10:124 0:009 8: 'Recovery HD' 10:124 0:000 AddLoaderEntry for Volume Name=Recovery HD 10:133 0:008 9: 'Legacy HD1' no file system 10:133 0:000 10: 'Legacy HD1' no file system 10:133 0:000 Custom legacy start 10:133 0:000 Custom legacy end 10:133 0:000 Custom tool start 10:133 0:000 Custom tool end 10:133 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 10:133 0:000 Checking EFI partition Volume 6 for Clover 10:133 0:000 Found Clover 10:133 0:000 EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored 10:133 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 10:154 0:021 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 10:154 0:000 EfiBootVolume not found 10:154 0:000 Default boot entry not found 10:154 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 10:154 0:000 DefaultIndex=-1 and MainMenu.EntryCount=9 11:674 1:519 Boot options: ------------- 11:674 0:000 BootOrder: 1: Boot0000 11:674 0:000 0) Boot0000: Windows Boot Manager, Attr: 0x1 11:674 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 11:674 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 11:674 0:000 ------------- 11:674 0:000 AddBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI, ShortDevPath Clover start bootmgfw.efi at EFI, 0 11:674 0:000 AddBootOption: Clover start bootmgfw.efi at EFI 11:674 0:000 FilePath: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 11:674 0:000 BootIndex: 0 11:674 0:000 Found BootNum: 0001 11:710 0:035 Boot0001 saved 11:710 0:000 AddToBootOrder: Boot0001 at index 0 11:710 0:000 BootOrder: 1: Boot0000 11:714 0:003 SetVariable: BootOrder = Success 11:714 0:000 2: Boot0001, Boot0000 11:714 0:000 AddBootOptionForFile: done. 11:714 0:000 Entry 0 assigned option DB210001 11:714 0:000 AddBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI, ShortDevPath Clover start boot.efi at MacSSD, 1 11:714 0:000 AddBootOption: Clover start boot.efi at MacSSD 11:714 0:000 FilePath: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 11:714 0:000 BootIndex: 1 11:714 0:000 Found BootNum: 0002 11:749 0:034 Boot0002 saved 11:749 0:000 AddToBootOrder: Boot0002 at index 1 11:749 0:000 BootOrder: 2: Boot0001, Boot0000 11:753 0:004 SetVariable: BootOrder = Success 11:753 0:000 3: Boot0001, Boot0002, Boot0000 11:753 0:000 AddBootOptionForFile: done. 11:753 0:000 Entry 1 assigned option DB210002 11:753 0:000 AddBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI, ShortDevPath Clover start boot.efi at Recovery HD, 2 11:753 0:000 AddBootOption: Clover start boot.efi at Recovery HD 11:753 0:000 FilePath: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 11:753 0:000 BootIndex: 2 11:753 0:000 Found BootNum: 0003 11:791 0:037 Boot0003 saved 11:791 0:000 AddToBootOrder: Boot0003 at index 2 11:791 0:000 BootOrder: 3: Boot0001, Boot0002, Boot0000 11:796 0:004 SetVariable: BootOrder = Success 11:796 0:000 4: Boot0001, Boot0002, Boot0003, Boot0000 11:796 0:000 AddBootOptionForFile: done. 11:796 0:000 Entry 2 assigned option DB210003 11:796 0:000 Boot options: ------------- 11:796 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 11:796 0:000 0) Boot0001: Clover start bootmgfw.efi at EFI, Attr: 0x1 11:796 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 11:796 0:000 Size: 214 (Attr:4 + FPl:2 + Desc:66 + FP:102 + Opt:40 = 214 -> OK) 11:796 0:000 1) Boot0002: Clover start boot.efi at MacSSD, Attr: 0x1 11:796 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 11:796 0:000 Size: 210 (Attr:4 + FPl:2 + Desc:64 + FP:102 + Opt:38 = 210 -> OK) 11:796 0:000 2) Boot0003: Clover start boot.efi at Recovery HD, Attr: 0x1 11:796 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 11:796 0:000 Size: 230 (Attr:4 + FPl:2 + Desc:74 + FP:102 + Opt:48 = 230 -> OK) 11:797 0:000 3) Boot0000: Windows Boot Manager, Attr: 0x1 11:797 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 11:797 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 11:797 0:000 ------------- 11:797 0:000 ReinitSelfLib after theme change 11:797 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 11:797 0:000 found 11 volumes with blockIO 11:797 0:000 0. Volume: 11:797 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 11:799 0:002 Result of bootcode detection: bootable unknown (legacy) 11:799 0:000 1. Volume: 11:799 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 11:800 0:000 Result of bootcode detection: bootable Windows (vista,win) 11:800 0:000 2. Volume: 11:800 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 11:800 0:000 3. Volume: 11:800 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 11:800 0:000 found optical drive 11:800 0:000 4. Volume: 11:800 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0) 11:801 0:000 5. Volume: 11:801 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000) 11:802 0:000 Result of bootcode detection: bootable Windows (vista,win) 11:802 0:000 6. Volume: 11:802 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 11:802 0:000 Result of bootcode detection: bootable unknown (legacy) 11:802 0:000 This is SelfVolume !! 11:802 0:000 7. Volume: 11:802 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68) 11:803 0:000 8. Volume: 11:803 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20) 11:803 0:000 9. Volume: 11:803 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000) 11:804 0:000 Result of bootcode detection: bootable unknown (legacy) 11:804 0:000 10. Volume: 11:804 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000) 11:805 0:000 Result of bootcode detection: bootable Windows (win) 11:805 0:000 Choosing theme yosemitelogin 11:805 0:000 Custom entries start 11:805 0:000 Custom entries finish 11:805 0:000 Scanning loaders... 11:805 0:000 0: 'Whole Disc Boot' no file system 11:805 0:000 1: 'Whole Disc Boot' no file system 11:805 0:000 2: 'Whole Disc Boot' no file system 11:805 0:000 3: 'Whole Disc Boot' no file system 11:805 0:000 4: 'Whole Disc Boot' no file system 11:805 0:000 5: 'Legacy HD1' no file system 11:805 0:000 6: 'EFI' 11:805 0:000 AddLoaderEntry for Volume Name=EFI 11:813 0:008 7: 'MacSSD' 11:813 0:000 AddLoaderEntry for Volume Name=MacSSD 11:814 0:000 Check if volume Is Hibernated: 11:814 0:000 Check sleep image 'by signature': 11:819 0:004 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 11:819 0:000 SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage' 11:823 0:004 Reading first 512 bytes of sleepimage ... 11:824 0:000 OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512) 11:824 0:000 sig lion: 0 11:824 0:000 sig snow: 0 11:824 0:000 no valid sleep image offset was found 11:824 0:000 Reading completed -> Success 11:824 0:000 sleepimage offset could not be acquired 11:824 0:000 hibernated: no - sign 11:834 0:009 8: 'Recovery HD' 11:834 0:000 AddLoaderEntry for Volume Name=Recovery HD 11:842 0:008 9: 'Legacy HD1' no file system 11:842 0:000 10: 'Legacy HD1' no file system 11:842 0:000 Custom legacy start 11:842 0:000 Custom legacy end 11:842 0:000 Custom tool start 11:842 0:000 Custom tool end 11:842 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 11:842 0:000 Checking EFI partition Volume 6 for Clover 11:842 0:000 Found Clover 11:842 0:000 EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored 11:842 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 11:864 0:022 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 11:864 0:000 EfiBootVolume not found 11:864 0:000 Default boot entry not found 11:864 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 11:864 0:000 DefaultIndex=-1 and MainMenu.EntryCount=9 13:592 1:727 Boot options: ------------- 13:592 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 13:592 0:000 0) Boot0001: Clover start bootmgfw.efi at EFI, Attr: 0x1 13:592 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 13:592 0:000 Size: 214 (Attr:4 + FPl:2 + Desc:66 + FP:102 + Opt:40 = 214 -> OK) 13:593 0:000 1) Boot0002: Clover start boot.efi at MacSSD, Attr: 0x1 13:593 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 13:593 0:000 Size: 210 (Attr:4 + FPl:2 + Desc:64 + FP:102 + Opt:38 = 210 -> OK) 13:593 0:000 2) Boot0003: Clover start boot.efi at Recovery HD, Attr: 0x1 13:593 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 13:593 0:000 Size: 230 (Attr:4 + FPl:2 + Desc:74 + FP:102 + Opt:48 = 230 -> OK) 13:593 0:000 3) Boot0000: Windows Boot Manager, Attr: 0x1 13:593 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 13:593 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 13:593 0:000 ------------- 13:593 0:000 DeleteBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 13:593 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 13:593 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 13:593 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 13:593 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 13:593 0:000 FindBootOptionForFile: Found Boot0001, at index 0 13:593 0:000 deleted option: 0001 13:593 0:000 DeleteBootOption: Boot0001 13:594 0:000 Boot0001 deleted 13:594 0:000 DeleteFromBootOrder: 0001 13:594 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 13:594 0:000 found at index 0 13:598 0:003 SetVariable: BootOrder = Success 13:598 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 13:598 0:000 BootOrder: 3: Boot0002, Boot0003, Boot0000 13:598 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 13:598 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 13:598 0:000 FindBootOptionForFile: Found Boot0002, at index 0 13:598 0:000 deleted option: 0002 13:598 0:000 DeleteBootOption: Boot0002 13:599 0:000 Boot0002 deleted 13:599 0:000 DeleteFromBootOrder: 0002 13:599 0:000 BootOrder: 3: Boot0002, Boot0003, Boot0000 13:599 0:000 found at index 0 13:603 0:003 SetVariable: BootOrder = Success 13:603 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 13:603 0:000 BootOrder: 2: Boot0003, Boot0000 13:603 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 13:603 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 13:603 0:000 FindBootOptionForFile: Found Boot0003, at index 0 13:603 0:000 deleted option: 0003 13:603 0:000 DeleteBootOption: Boot0003 13:604 0:000 Boot0003 deleted 13:604 0:000 DeleteFromBootOrder: 0003 13:604 0:000 BootOrder: 2: Boot0003, Boot0000 13:604 0:000 found at index 0 13:607 0:003 SetVariable: BootOrder = Success 13:607 0:000 FindBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI 13:607 0:000 BootOrder: 1: Boot0000 13:607 0:000 Searching for: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 130) 13:607 0:000 and for: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI (Len: 102) 13:608 0:000 FindBootOptionForFile: Not found. 13:608 0:000 Boot options: ------------- 13:608 0:000 BootOrder: 1: Boot0000 13:608 0:000 0) Boot0000: Windows Boot Manager, Attr: 0x1 13:608 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 13:608 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 13:608 0:000 ------------- 13:608 0:000 ReinitSelfLib after theme change 13:608 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 13:608 0:000 found 11 volumes with blockIO 13:608 0:000 0. Volume: 13:608 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 13:611 0:003 Result of bootcode detection: bootable unknown (legacy) 13:611 0:000 1. Volume: 13:611 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 13:612 0:000 Result of bootcode detection: bootable Windows (vista,win) 13:612 0:000 2. Volume: 13:612 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 13:612 0:000 3. Volume: 13:612 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 13:612 0:000 found optical drive 13:612 0:000 4. Volume: 13:612 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0) 13:613 0:000 5. Volume: 13:613 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000) 13:613 0:000 Result of bootcode detection: bootable Windows (vista,win) 13:613 0:000 6. Volume: 13:613 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 13:614 0:000 Result of bootcode detection: bootable unknown (legacy) 13:614 0:000 This is SelfVolume !! 13:614 0:000 7. Volume: 13:614 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68) 13:615 0:000 8. Volume: 13:615 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20) 13:615 0:000 9. Volume: 13:615 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000) 13:616 0:000 Result of bootcode detection: bootable unknown (legacy) 13:616 0:000 10. Volume: 13:616 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000) 13:616 0:000 Result of bootcode detection: bootable Windows (win) 13:616 0:000 Choosing theme yosemitelogin 13:616 0:000 Custom entries start 13:616 0:000 Custom entries finish 13:616 0:000 Scanning loaders... 13:616 0:000 0: 'Whole Disc Boot' no file system 13:616 0:000 1: 'Whole Disc Boot' no file system 13:616 0:000 2: 'Whole Disc Boot' no file system 13:616 0:000 3: 'Whole Disc Boot' no file system 13:616 0:000 4: 'Whole Disc Boot' no file system 13:616 0:000 5: 'Legacy HD1' no file system 13:616 0:000 6: 'EFI' 13:616 0:000 AddLoaderEntry for Volume Name=EFI 13:625 0:008 7: 'MacSSD' 13:625 0:000 AddLoaderEntry for Volume Name=MacSSD 13:626 0:000 Check if volume Is Hibernated: 13:626 0:000 Check sleep image 'by signature': 13:631 0:004 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 13:631 0:000 SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage' 13:635 0:004 Reading first 512 bytes of sleepimage ... 13:635 0:000 OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512) 13:635 0:000 sig lion: 0 13:635 0:000 sig snow: 0 13:635 0:000 no valid sleep image offset was found 13:635 0:000 Reading completed -> Success 13:635 0:000 sleepimage offset could not be acquired 13:635 0:000 hibernated: no - sign 13:645 0:009 8: 'Recovery HD' 13:645 0:000 AddLoaderEntry for Volume Name=Recovery HD 13:654 0:008 9: 'Legacy HD1' no file system 13:654 0:000 10: 'Legacy HD1' no file system 13:654 0:000 Custom legacy start 13:654 0:000 Custom legacy end 13:654 0:000 Custom tool start 13:654 0:000 Custom tool end 13:654 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 13:654 0:000 Checking EFI partition Volume 6 for Clover 13:654 0:000 Found Clover 13:654 0:000 EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored 13:654 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 13:675 0:021 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 13:675 0:000 EfiBootVolume not found 13:675 0:000 Default boot entry not found 13:675 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 13:675 0:000 DefaultIndex=-1 and MainMenu.EntryCount=9 16:008 2:332 Boot options: ------------- 16:008 0:000 BootOrder: 1: Boot0000 16:008 0:000 0) Boot0000: Windows Boot Manager, Attr: 0x1 16:008 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 16:008 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 16:008 0:000 ------------- 16:008 0:000 AddBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI, ShortDevPath Clover start bootmgfw.efi at EFI, 0 16:008 0:000 AddBootOption: Clover start bootmgfw.efi at EFI 16:008 0:000 FilePath: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 16:008 0:000 BootIndex: 0 16:008 0:000 Found BootNum: 0001 16:044 0:035 Boot0001 saved 16:044 0:000 AddToBootOrder: Boot0001 at index 0 16:044 0:000 BootOrder: 1: Boot0000 16:048 0:003 SetVariable: BootOrder = Success 16:048 0:000 2: Boot0001, Boot0000 16:048 0:000 AddBootOptionForFile: done. 16:048 0:000 Entry 0 assigned option DB210001 16:048 0:000 AddBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI, ShortDevPath Clover start boot.efi at MacSSD, 1 16:048 0:000 AddBootOption: Clover start boot.efi at MacSSD 16:048 0:000 FilePath: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 16:048 0:000 BootIndex: 1 16:048 0:000 Found BootNum: 0002 16:083 0:034 Boot0002 saved 16:083 0:000 AddToBootOrder: Boot0002 at index 1 16:083 0:000 BootOrder: 2: Boot0001, Boot0000 16:087 0:004 SetVariable: BootOrder = Success 16:087 0:000 3: Boot0001, Boot0002, Boot0000 16:087 0:000 AddBootOptionForFile: done. 16:087 0:000 Entry 1 assigned option DB210002 16:087 0:000 AddBootOptionForFile: D1A48518, \EFI\CLOVER\CLOVERX64.EFI, ShortDevPath Clover start boot.efi at Recovery HD, 2 16:087 0:000 AddBootOption: Clover start boot.efi at Recovery HD 16:087 0:000 FilePath: HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 16:087 0:000 BootIndex: 2 16:087 0:000 Found BootNum: 0003 16:125 0:037 Boot0003 saved 16:125 0:000 AddToBootOrder: Boot0003 at index 2 16:125 0:000 BootOrder: 3: Boot0001, Boot0002, Boot0000 16:130 0:004 SetVariable: BootOrder = Success 16:130 0:000 4: Boot0001, Boot0002, Boot0003, Boot0000 16:130 0:000 AddBootOptionForFile: done. 16:130 0:000 Entry 2 assigned option DB210003 16:130 0:000 Boot options: ------------- 16:130 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 16:130 0:000 0) Boot0001: Clover start bootmgfw.efi at EFI, Attr: 0x1 16:130 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 16:130 0:000 Size: 214 (Attr:4 + FPl:2 + Desc:66 + FP:102 + Opt:40 = 214 -> OK) 16:130 0:000 1) Boot0002: Clover start boot.efi at MacSSD, Attr: 0x1 16:130 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 16:130 0:000 Size: 210 (Attr:4 + FPl:2 + Desc:64 + FP:102 + Opt:38 = 210 -> OK) 16:130 0:000 2) Boot0003: Clover start boot.efi at Recovery HD, Attr: 0x1 16:130 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 16:130 0:000 Size: 230 (Attr:4 + FPl:2 + Desc:74 + FP:102 + Opt:48 = 230 -> OK) 16:131 0:000 3) Boot0000: Windows Boot Manager, Attr: 0x1 16:131 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 16:131 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 16:131 0:000 ------------- 16:131 0:000 ReinitSelfLib after theme change 16:131 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 16:131 0:000 found 11 volumes with blockIO 16:131 0:000 0. Volume: 16:131 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 16:133 0:002 Result of bootcode detection: bootable unknown (legacy) 16:133 0:000 1. Volume: 16:133 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 16:134 0:000 Result of bootcode detection: bootable Windows (vista,win) 16:134 0:000 2. Volume: 16:134 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 16:134 0:000 3. Volume: 16:134 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 16:134 0:000 found optical drive 16:134 0:000 4. Volume: 16:134 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0) 16:135 0:000 5. Volume: 16:135 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000) 16:135 0:000 Result of bootcode detection: bootable Windows (vista,win) 16:135 0:000 6. Volume: 16:135 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 16:136 0:000 Result of bootcode detection: bootable unknown (legacy) 16:136 0:000 This is SelfVolume !! 16:136 0:000 7. Volume: 16:136 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68) 16:137 0:000 8. Volume: 16:137 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20) 16:137 0:000 9. Volume: 16:137 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000) 16:138 0:000 Result of bootcode detection: bootable unknown (legacy) 16:138 0:000 10. Volume: 16:138 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000) 16:138 0:000 Result of bootcode detection: bootable Windows (win) 16:138 0:000 Choosing theme yosemitelogin 16:139 0:000 Custom entries start 16:139 0:000 Custom entries finish 16:139 0:000 Scanning loaders... 16:139 0:000 0: 'Whole Disc Boot' no file system 16:139 0:000 1: 'Whole Disc Boot' no file system 16:139 0:000 2: 'Whole Disc Boot' no file system 16:139 0:000 3: 'Whole Disc Boot' no file system 16:139 0:000 4: 'Whole Disc Boot' no file system 16:139 0:000 5: 'Legacy HD1' no file system 16:139 0:000 6: 'EFI' 16:139 0:000 AddLoaderEntry for Volume Name=EFI 16:147 0:008 7: 'MacSSD' 16:147 0:000 AddLoaderEntry for Volume Name=MacSSD 16:148 0:000 Check if volume Is Hibernated: 16:148 0:000 Check sleep image 'by signature': 16:153 0:004 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 16:153 0:000 SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage' 16:157 0:004 Reading first 512 bytes of sleepimage ... 16:157 0:000 OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512) 16:157 0:000 sig lion: 0 16:157 0:000 sig snow: 0 16:157 0:000 no valid sleep image offset was found 16:157 0:000 Reading completed -> Success 16:157 0:000 sleepimage offset could not be acquired 16:157 0:000 hibernated: no - sign 16:167 0:009 8: 'Recovery HD' 16:167 0:000 AddLoaderEntry for Volume Name=Recovery HD 16:176 0:008 9: 'Legacy HD1' no file system 16:176 0:000 10: 'Legacy HD1' no file system 16:176 0:000 Custom legacy start 16:176 0:000 Custom legacy end 16:176 0:000 Custom tool start 16:176 0:000 Custom tool end 16:176 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 16:176 0:000 Checking EFI partition Volume 6 for Clover 16:176 0:000 Found Clover 16:176 0:000 EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored 16:176 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 16:199 0:022 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 16:199 0:000 EfiBootVolume not found 16:199 0:000 Default boot entry not found 16:199 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 16:199 0:000 DefaultIndex=-1 and MainMenu.EntryCount=9 17:801 1:602 Boot options: ------------- 17:801 0:000 BootOrder: 4: Boot0001, Boot0002, Boot0003, Boot0000 17:801 0:000 0) Boot0001: Clover start bootmgfw.efi at EFI, Attr: 0x1 17:801 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 17:801 0:000 Size: 214 (Attr:4 + FPl:2 + Desc:66 + FP:102 + Opt:40 = 214 -> OK) 17:802 0:000 1) Boot0002: Clover start boot.efi at MacSSD, Attr: 0x1 17:802 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 17:802 0:000 Size: 210 (Attr:4 + FPl:2 + Desc:64 + FP:102 + Opt:38 = 210 -> OK) 17:802 0:000 2) Boot0003: Clover start boot.efi at Recovery HD, Attr: 0x1 17:802 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\CLOVER\CLOVERX64.EFI 17:802 0:000 Size: 230 (Attr:4 + FPl:2 + Desc:74 + FP:102 + Opt:48 = 230 -> OK) 17:802 0:000 3) Boot0000: Windows Boot Manager, Attr: 0x1 17:802 0:000 HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi 17:802 0:000 Size: 300 (Attr:4 + FPl:2 + Desc:42 + FP:116 + Opt:136 = 300 -> OK) 17:802 0:000 Boot options not in BootOrder list: 23:560 5:758 not found 23:560 0:000 ------------- 23:560 0:000 ReinitSelfLib after theme change 23:560 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 23:560 0:000 found 11 volumes with blockIO 23:560 0:000 0. Volume: 23:560 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0) 23:563 0:002 Result of bootcode detection: bootable unknown (legacy) 23:563 0:000 1. Volume: 23:563 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0) 23:564 0:000 Result of bootcode detection: bootable Windows (vista,win) 23:564 0:000 2. Volume: 23:564 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0) 23:564 0:000 3. Volume: 23:564 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0) 23:564 0:000 found optical drive 23:564 0:000 4. Volume: 23:564 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0) 23:565 0:000 5. Volume: 23:565 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,B93A880C-15F2-4DCE-8339-1C83CD7F8E2A,0x800,0x1788E000) 23:565 0:000 Result of bootcode detection: bootable Windows (vista,win) 23:565 0:000 6. Volume: 23:565 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,0D35F2DD-81AD-4415-BB22-F5B363C24C20,0x1788E800,0x64000) 23:566 0:000 Result of bootcode detection: bootable unknown (legacy) 23:566 0:000 This is SelfVolume !! 23:566 0:000 7. Volume: 23:566 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,E6857661-C218-46C3-8B2C-3075DDCA76D9,0x178F2800,0x62CAB68) 23:567 0:000 8. Volume: 23:567 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,8593CCE6-ACD9-46D2-8765-DFAECCA1473B,0x1DBBD368,0x135F20) 23:567 0:000 9. Volume: 23:567 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,MBR,0x6C762267,0x800,0x74701000) 23:568 0:000 Result of bootcode detection: bootable unknown (legacy) 23:568 0:000 10. Volume: 23:568 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)\HD(1,MBR,0x2E844E58,0x800,0x74705000) 23:568 0:000 Result of bootcode detection: bootable Windows (win) 23:568 0:000 Choosing theme yosemitelogin 23:568 0:000 Custom entries start 23:568 0:000 Custom entries finish 23:568 0:000 Scanning loaders... 23:568 0:000 0: 'Whole Disc Boot' no file system 23:568 0:000 1: 'Whole Disc Boot' no file system 23:568 0:000 2: 'Whole Disc Boot' no file system 23:568 0:000 3: 'Whole Disc Boot' no file system 23:568 0:000 4: 'Whole Disc Boot' no file system 23:568 0:000 5: 'Legacy HD1' no file system 23:568 0:000 6: 'EFI' 23:568 0:000 AddLoaderEntry for Volume Name=EFI 23:577 0:008 7: 'MacSSD' 23:577 0:000 AddLoaderEntry for Volume Name=MacSSD 23:578 0:000 Check if volume Is Hibernated: 23:578 0:000 Check sleep image 'by signature': 23:583 0:004 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success 23:583 0:000 SleepImage name from pref: ImageVolume = 'MacSSD', ImageName = '\private\var\vm\sleepimage' 23:587 0:004 Reading first 512 bytes of sleepimage ... 23:587 0:000 OurBlockIoRead: Lba=1CA72800, Offset=394E500000 (BlockSize=512) 23:587 0:000 sig lion: 0 23:587 0:000 sig snow: 0 23:587 0:000 no valid sleep image offset was found 23:587 0:000 Reading completed -> Success 23:587 0:000 sleepimage offset could not be acquired 23:587 0:000 hibernated: no - sign 23:597 0:009 8: 'Recovery HD' 23:597 0:000 AddLoaderEntry for Volume Name=Recovery HD 23:606 0:008 9: 'Legacy HD1' no file system 23:606 0:000 10: 'Legacy HD1' no file system 23:606 0:000 Custom legacy start 23:606 0:000 Custom legacy end 23:606 0:000 Custom tool start 23:606 0:000 Custom tool end 23:606 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 23:606 0:000 Checking EFI partition Volume 6 for Clover 23:606 0:000 Found Clover 23:606 0:000 EmuVariable UninstallEmulation: CloseEvent = Invalid Parameter, original var services restored 23:606 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 23:629 0:022 GetEfiBootDeviceFromNvram: efi-boot-device-data not found 23:629 0:000 EfiBootVolume not found 23:629 0:000 Default boot entry not found 23:629 0:000 EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored 23:629 0:000 DefaultIndex=-1 and MainMenu.EntryCount=9 24:969 1:340 BootOption of the entry is empty 24:969 0:000 StartLoader() start 24:969 0:000 Finally: Bus=100000kHz CPU=3400MHz 24:969 0:000 Kernel and Kext Patches: 24:969 0:000 Allowed: y 24:969 0:000 Debug: n 24:969 0:000 KernelCpu: n 24:969 0:000 Lapic: n 24:969 0:000 AICPUPM: n 24:969 0:000 AppleRTC: n 24:969 0:000 KernelPm: n 24:969 0:000 FakeCPUID: 0x0 24:969 0:000 ATIController: <null string> 24:969 0:000 ATIDataLength: 0 24:969 0:000 0 Kexts to load 24:969 0:000 5 Kexts to patch 24:969 0:000 KextPatch[0]: 11 bytes, IOAHCIBlockStorage 24:969 0:000 KextPatch[1]: 8 bytes, AppleAHCIPort 24:969 0:000 KextPatch[2]: 6 bytes, AppleHDA 24:969 0:000 KextPatch[3]: 4 bytes, AppleHDA 24:969 0:000 KextPatch[4]: 6 bytes, AppleHDA 24:969 0:000 Loading boot.efi 25:046 0:077 load image status=Success 25:130 0:083 GetOSVersion: : 10.10.1 25:130 0:000 EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent VirtualAddressChange = Success, CreateEvent ExitBootServices = Success, set Status=Success 25:153 0:023 insert table 9 for dev 0:0 25:153 0:000 insert table 9 for dev 19:0 25:153 0:000 insert table 9 for dev 0:0 25:154 0:000 Injecting user memory modules to SMBIOS 25:154 0:000 Channels: 2 25:154 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 25:154 0:000 BANK0 DIMM0 1600MHz 4096MB 25:154 0:000 mTotalSystemMemory = 4096 25:154 0:000 BANK1 DIMM0 1600MHz 4096MB 25:154 0:000 mTotalSystemMemory = 8192 25:154 0:000 BANK0 DIMM1 1600MHz 4096MB 25:154 0:000 mTotalSystemMemory = 12288 25:154 0:000 BANK1 DIMM1 1600MHz 4096MB 25:154 0:000 mTotalSystemMemory = 16384 25:154 0:000 NumberOfMemoryDevices = 4 25:154 0:000 Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000 25:154 0:000 Type20[1]->End = 0xBFFFFF, Type17[2] = 0x4000 25:154 0:000 Type20[2]->End = 0x7FFFFF, Type17[1] = 0x6000 25:154 0:000 Type20[3]->End = 0xFFFFFF, Type17[3] = 0xA000 25:154 0:000 RSDT 0xDD736028 25:154 0:000 FADT from RSDT: 0xDD7360F8 25:154 0:000 XSDT 0xDD736078 25:154 0:000 FADT from XSDT: 0xDD740F48 25:154 0:000 Xsdt reallocation done 25:154 0:000 old FADT length=10C 25:154 0:000 Found OperationRegion(GNVS, SystemMemory, DD865E18, ...) 25:154 0:000 Found OperationRegion(MCHT, SystemMemory, FED10000, ...) 25:154 0:000 Found OperationRegion(RCRB, SystemMemory, FED1C000, ...) 25:154 0:000 Found OperationRegion(CPSB, SystemMemory, DD715E18, ...) 25:154 0:000 Found OperationRegion(IGDM, SystemMemory, 0, ...) 25:154 0:000 Found OperationRegion(RAMW, SystemMemory, DD854018, ...) 25:156 0:002 DSDT len = 0xADC1 new len = 0xC379 25:156 0:000 Apply DsdtFixMask=0x00000000 old way 25:156 0:000 drop _DSM mask=0x0000 25:156 0:000 ========= Auto patch DSDT Starting ======== 25:156 0:000 VideoCard devID=0x68181002 25:156 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 25:156 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE 25:156 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE 25:428 0:271 Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1) 25:428 0:000 Found Airport Atheros at 0x1C0006, 0x0, DeviceID=0x0032 25:428 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE 25:428 0:000 first CPU found at 7212 offset 7215 25:428 0:000 score candidate at 720E 25:428 0:000 score inserted in acpi_cpu_score _PR_ 25:428 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 within the score: _PR_ 25:428 0:000 Found PCIROOTUID = 0 25:428 0:000 ========= Auto patch DSDT Finished ======== 25:428 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2706 25:428 0:000 Xsdt has tables count=9 25:428 0:000 Table: SSDT CpuPm 2706 dropped 25:428 0:000 corrected XSDT length=100 25:428 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2474 25:428 0:000 Xsdt has tables count=8 25:428 0:000 Table: SSDT Cpu0Ist 2474 dropped 25:428 0:000 corrected XSDT length=92 25:428 0:000 Drop tables from Xsdt, SIGN=SSDT TableID= Length=0 25:428 0:000 Xsdt has tables count=7 25:428 0:000 Table: SSDT SataTabl 877 dropped 25:428 0:000 corrected XSDT length=84 25:428 0:000 Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success 25:431 0:002 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4 25:431 0:000 EdidDiscovered size=128 25:431 0:000 00 | 00 FF FF FF FF FF FF 00 04 69 93 24 01 01 01 01 25:431 0:000 16 | 14 17 01 03 80 35 1E 78 EA 2C C5 A4 56 50 A1 28 25:431 0:000 32 | 0F 50 54 BF EF 00 71 4F 81 80 81 40 95 00 A9 40 25:431 0:000 48 | B3 00 D1 C0 01 01 02 3A 80 18 71 38 2D 40 58 2C 25:431 0:000 64 | 45 00 13 2B 21 00 00 1E 00 00 00 FD 00 32 4C 1E 25:431 0:000 80 | 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 56 25:431 0:000 96 | 45 32 34 37 0A 20 20 20 20 20 20 20 00 00 00 FF 25:431 0:000 112 | 00 44 35 4C 4D 51 53 30 35 37 32 37 34 0A 00 C2 25:431 0:000 ATI injection not set 25:431 0:000 LAN Controller [8086:1503] :: PciRoot(0x0)\Pci(0x19,0x0) 25:431 0:000 HDA Controller [8086:1E20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1) 25:431 0:000 stringlength = 540 25:431 0:000 CurrentMode: Width=1920 Height=1080 25:431 0:000 FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10' 25:435 0:003 MSR 0x1B0 set to 00000000 25:435 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10 25:437 0:001 Extra kext: EFI\CLOVER\kexts\10.10\AHCIPortInjector.kext 25:440 0:003 Extra kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext 25:447 0:006 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext 25:451 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext 25:454 0:003 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext 25:459 0:004 Extra kext: EFI\CLOVER\kexts\10.10\realtekALC.kext 25:462 0:003 Removed efi-boot-device-data variable: Not Found 25:462 0:000 Custom boot is disabled 25:462 0:000 Closing log Link to comment Share on other sites More sharing options...
Slice Posted December 1, 2014 Share Posted December 1, 2014 BootDefaultLoaderboot.efi 1 Link to comment Share on other sites More sharing options...
jason761 Posted December 1, 2014 Share Posted December 1, 2014 <key>Boot</key> <dict> <key>DefaultLoader</key> <string>boot.efi</string> Thanks! I can boot into OS X automatically. Link to comment Share on other sites More sharing options...
Slice Posted December 1, 2014 Share Posted December 1, 2014 Need Help on the clover boot GUI I can't get the clover boot GUI full resolution (1920x1080) Here's what I tried so far: - no custom EDID, No Patch VBios, No PatchVBiosBtyes --> GUI shows like squashed 1920x1440 - with or without custom EDID, Patch VBios Enable, no PatchVBiosBytes --> GUI shows like stretched 800x600 - with or without custom EDID, NO Patch VBios Enable, with PatchVBiosBytes --> GUI still shows like stretched 800x600 (with PatchVBiosBytes: find "gAeoAqAF" replace "gAeoAjgE" ) I attached the boot log of this test. what else I missed ? attached the clover config.plist my setup: Clover v2k r2999 Yosemite 10.10.1 CPU Sandy i7 Gigabyte P67A-UD3R-B3 --> Non UEFI Intel 120G SSD DDR3 8G Memory You are wrong, this is UEFI Starting Clover rev 2999 on TianoCore.org EFI So you have to use CsmVideoDxe in the folder /EFI/CLOVER/drivers64UEFI/ Link to comment Share on other sites More sharing options...
Maniac10 Posted December 1, 2014 Share Posted December 1, 2014 @thy: Slice is right, your motherboard includes a hybrid BIOS, which makes it capable of booting in UEFI mode. I'd advice you to stay away from that hybrid EFI {censored}, my mobo have that too and it can't be unlocked to get more resolutions (not even by adding the LegacyRegion2Dxe driver, missing from that hybrid EFI). Just delete the /EFI/BOOT folder, install a bootloader in the MBR and it should work with "PatchVBios" and "ScreenResolution". Link to comment Share on other sites More sharing options...
warraisraw Posted December 1, 2014 Share Posted December 1, 2014 Hi, I've a question, the lastest version of Clover recognize the MBP 6.2 correctly? (SMC 1.58f17). In this post they talk about this: http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page-238?do=findComment&comment=2032926 Regards. Link to comment Share on other sites More sharing options...
Slice Posted December 1, 2014 Share Posted December 1, 2014 Hi, I've a question, the lastest version of Clover recognize the MBP 6.2 correctly? (SMC 1.58f17). In this post they talk about this: http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page-238?do=findComment&comment=2032926 Regards. No "MacBook1,1", "MacBook2,1", "MacBook4,1", "MacBook5,2", "MacBookPro5,1", "MacBookPro8,1", "MacBookPro8,3", "MacBookPro9,2", "MacBookPro10,1", "MacBookPro11,1", "MacBookAir3,1", "MacBookAir5,2", "MacBookAir6,2", But Clover correctly recognizes config.plist. SMC version can be injected by FakeSMC. Link to comment Share on other sites More sharing options...
ameris_cyning Posted December 2, 2014 Share Posted December 2, 2014 Slight issue For some reason booting clover with my mobo set to UEFI does not let me have onboard ethernet, but when I boot it through legacy, it works. During a -v boot it tells me that the BIOS has disabled the NIC. Specs in my signature. Link to comment Share on other sites More sharing options...
Slice Posted December 2, 2014 Share Posted December 2, 2014 Slight issue For some reason booting clover with my mobo set to UEFI does not let me have onboard ethernet, but when I boot it through legacy, it works. During a -v boot it tells me that the BIOS has disabled the NIC. Specs in my signature. I think DarwinDumper report may shine on the problem. Link to comment Share on other sites More sharing options...
ameris_cyning Posted December 2, 2014 Share Posted December 2, 2014 DarwinDumper_2.9.6_Chameleon_2.3_X64_Mav_notsur3.zipDarwinDumper_2.9.5_AMI_X64_3033_Mav_notsur3.zip First one is legacy Link to comment Share on other sites More sharing options...
Fabio1971 Posted December 2, 2014 Share Posted December 2, 2014 Hello slice Question: Can you explain this entry 9:135 0:008 Removed efi-boot-device-data variable: Not Found Thanks Fabio Link to comment Share on other sites More sharing options...
Slice Posted December 2, 2014 Share Posted December 2, 2014 DarwinDumper_2.9.6_Chameleon_2.3_X64_Mav_notsur3.zipDarwinDumper_2.9.5_AMI_X64_3033_Mav_notsur3.zip First one is legacy Not too many LAN drivers? 54:348 0:003 Extra kext: EFI\CLOVER\kexts\10.9\ALXEthernet.kext 54:355 0:007 Extra kext: EFI\CLOVER\kexts\10.9\AppleIntelE1000e.kext 54:364 0:008 Extra kext: EFI\CLOVER\kexts\10.9\AtherosE2200Ethernet.kext 54:369 0:004 Extra kext: EFI\CLOVER\kexts\10.9\RealtekRTL8111.kext 5 --- Hello slice Question: Can you explain this entry 9:135 0:008 Removed efi-boot-device-data variable: Not Found Thanks Fabio No, it is not my idea. I just know it works and now you know this too. Link to comment Share on other sites More sharing options...
ameris_cyning Posted December 2, 2014 Share Posted December 2, 2014 Not too many LAN drivers? 54:348 0:003 Extra kext: EFI\CLOVER\kexts\10.9\ALXEthernet.kext 54:355 0:007 Extra kext: EFI\CLOVER\kexts\10.9\AppleIntelE1000e.kext 54:364 0:008 Extra kext: EFI\CLOVER\kexts\10.9\AtherosE2200Ethernet.kext 54:369 0:004 Extra kext: EFI\CLOVER\kexts\10.9\RealtekRTL8111.kext 5 --- No, it is not my idea. I just know it works and now you know this too. I have the same exact extensions in /e/e and /efi/clover/kexts. Plus, when booted legacy, Clover works with the AtherosE2200Ethernet.kext Link to comment Share on other sites More sharing options...
tluck Posted December 2, 2014 Share Posted December 2, 2014 @fabio - Removed efi-boot-device-data variable: Not Found not a problem can be ignored - but this is my understanding clover would normally use/boot from the device listed by this NVRAM variable and then remove/delete the NVRAM variable. how would this be set? this is set by OSX to restart on a certain disk (System Preferences/Startup Disk). if the variable is not found clover - just issues this notice and then uses the default or selected device etc. Link to comment Share on other sites More sharing options...
Fabio1971 Posted December 2, 2014 Share Posted December 2, 2014 @ slice No, it is not my idea. I just know it works and now you know this too. @ tluck not a problem can be ignored - but this is my understanding clover would normally use/boot from the device listed by this NVRAM variable and then remove/delete the NVRAM variable. how would this be set? this is set by OSX to restart on a certain disk (System Preferences/Startup Disk). if the variable is not found clover - just issues this notice and then uses the default or selected device etc. Thanks for the answer, I wanted to understand if it was a mistake Fabio Link to comment Share on other sites More sharing options...
clintster Posted December 3, 2014 Share Posted December 3, 2014 Long-time TonyMac/Chimera guy, been using it since SL. As OSX has progressed, its been more and more difficult to get full functionality - now impossible on Yosemite. A buddy of mine suggested Clover and I have been working on it for a week now tih no success. Looking for some help/suggestions on how to get it running: Using Clover r3033 System specs: Asus P8Z68-V Pro Gen 3 Dual GTX 560-Ti-448 GPUs (three monitors) SATA 6 HDDs I'm using the configuration suggested on the Easy Yosemite Install thread but I can't seem to get to the OS X installer. When I boot into the USB, the screen goes black after "DSMOD has arrived". I changed the GPU to IGFX in my bios and booted again and the system just restarts after "DSMOD has arrived". Won't boot into the actual installer. Not sure if it matters but for full disclosure: I am dual booting into 2 separate HDDs, the one I'm on now is a 1TB drive running Yosemite via Chimera (not much working but functional). The drive I am wanting to install Clover bootloader on is a 2TB HDD which is currently a clone of this drive. I planned on formatting the drive in the OSX installer but it won't make it that far... would be of any benefit/difference to format it prior to trying to install? I'm also using a basic NVidia specific config.plist I got from Tony's site... is there a repository on config.plist files somewhere more specific to individual boards? (wouldn't that be convenient) Also, I haven't used a DSDT since ML, hasn't been necessary with Chimera. Do I need one with Clover? Lastly, it's time for a new build. I still want to get this one running Yosemite ... and the Probook after this, but a new desktop will do me good. Any suggestions (or link to a section discussing new builds) on optimal components for a new build for an easy, fully funtional build? Thanks for the help. Link to comment Share on other sites More sharing options...
ameris_cyning Posted December 3, 2014 Share Posted December 3, 2014 Long-time TonyMac/Chimera guy, been using it since SL. As OSX has progressed, its been more and more difficult to get full functionality - now impossible on Yosemite. A buddy of mine suggested Clover and I have been working on it for a week now tih no success. Looking for some help/suggestions on how to get it running: Using Clover r3033 System specs: Asus P8Z68-V Pro Gen 3 Dual GTX 560-Ti-448 GPUs (three monitors) SATA 6 HDDs I'm using the configuration suggested on the Easy Yosemite Install thread but I can't seem to get to the OS X installer. When I boot into the USB, the screen goes black after "DSMOD has arrived". I changed the GPU to IGFX in my bios and booted again and the system just restarts after "DSMOD has arrived". Won't boot into the actual installer. Not sure if it matters but for full disclosure: I am dual booting into 2 separate HDDs, the one I'm on now is a 1TB drive running Yosemite via Chimera (not much working but functional). The drive I am wanting to install Clover bootloader on is a 2TB HDD which is currently a clone of this drive. I planned on formatting the drive in the OSX installer but it won't make it that far... would be of any benefit/difference to format it prior to trying to install? I'm also using a basic NVidia specific config.plist I got from Tony's site... is there a repository on config.plist files somewhere more specific to individual boards? (wouldn't that be convenient) Also, I haven't used a DSDT since ML, hasn't been necessary with Chimera. Do I need one with Clover? Lastly, it's time for a new build. I still want to get this one running Yosemite ... and the Probook after this, but a new desktop will do me good. Any suggestions (or link to a section discussing new builds) on optimal components for a new build for an easy, fully funtional build? Thanks for the help. Have you tried InjectNvidia=TRUE? Link to comment Share on other sites More sharing options...
clintster Posted December 3, 2014 Share Posted December 3, 2014 Have you tried InjectNvidia=TRUE? I have not, I did not, I did not see that option in my Clover configurator. Would this be a boot argument to add to my config.plist? Some sort of graphics issue, you can also try boot arg nv_disable=1. I did and had less favorable result, immediate "going to sleep for 10 seconds..." kext when attempting to boot to USB. Link to comment Share on other sites More sharing options...
Slice Posted December 3, 2014 Share Posted December 3, 2014 I have not, I did not, I did not see that option in my Clover configurator. Would this be a boot argument to add to my config.plist? <key>Graphics</key> <dict> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <false/> <key>NVidia</key> <true/> </dict> Link to comment Share on other sites More sharing options...
pkdesign Posted December 3, 2014 Share Posted December 3, 2014 There is definitely something up with versions higher than r2976. I just created a USB boot drive with r2976 and boot times are very fast. Any thing over that I get the long delay after BIOS boot screen. FYI-I updated to r3033 today and the long wait from BIOS to Clover GUI is down to an acceptable 7-8 seconds. Link to comment Share on other sites More sharing options...
pkdesign Posted December 3, 2014 Share Posted December 3, 2014 I have two quick questions: 1) Where is Clover pulling the "Serial Number (processor tray):" number from as shown in System Information? I did not enter anything into the "Board Serial Number" entry under SMBIOS in Clover Configurator but I get a 17 digit number here. Should I continue using that number by entering it into Board Serial number so Messages works? 2) Why do I get the entry "PutNvramPlistToRtVars: nvram.plist not found" in my boot log? Thanks! Link to comment Share on other sites More sharing options...
clintster Posted December 3, 2014 Share Posted December 3, 2014 Update - Tinkering with the config.plist and boot arguments finally got me to the installer screen and allowed me to install 10.10. Rebooted back into USB - loaded to installer USB and completed installation. Rebooted back into USB - loaded to HDD and completed installation Yosemite boots up Reformatter EFI partition from NFS to Fat32 Installed Clover r3033 Copied FakeSMC, ethernet, and Null CPU Mgmt kext to EFI/Clover/Kexts Replaced config.plist with file from USB Installed tolled audio kext - ALC892 working Current Issue: 1. Cannot boot directly to new UEFI Yosemite drive - in my BIOS I have a new UEFI drive named "MAC OS X" and then my HDD. Choosing either option immediately goes black and boots to my other HDD with Chimera Yosemite installed. No Clover boot loader comes up. 2. I have three monitors running on two GTX 56-Ti-448 GUIs. Both are detected in System report however the monitor connected to the second (lower) card is not showing and does not work. Other two work fine - in HD. Still need to work on iMessage/Facetime, and Bluetooth - any pointers in the right direction would be helpful. Link to comment Share on other sites More sharing options...
ballistic Posted December 4, 2014 Share Posted December 4, 2014 Update - Tinkering with the config.plist and boot arguments finally got me to the installer screen and allowed me to install 10.10. Rebooted back into USB - loaded to installer USB and completed installation. Rebooted back into USB - loaded to HDD and completed installation Yosemite boots up Reformatter EFI partition from NFS to Fat32 Installed Clover r3033 Copied FakeSMC, ethernet, and Null CPU Mgmt kext to EFI/Clover/Kexts Replaced config.plist with file from USB Installed tolled audio kext - ALC892 working Current Issue: 1. Cannot boot directly to new UEFI Yosemite drive - in my BIOS I have a new UEFI drive named "MAC OS X" and then my HDD. Choosing either option immediately goes black and boots to my other HDD with Chimera Yosemite installed. No Clover boot loader comes up. 2. I have three monitors running on two GTX 56-Ti-448 GUIs. Both are detected in System report however the monitor connected to the second (lower) card is not showing and does not work. Other two work fine - in HD. Still need to work on iMessage/Facetime, and Bluetooth - any pointers in the right direction would be helpful. Here's my boot section from config.plist <key>Boot</key> <dict> <key>Arguments</key> <string>darkwake=1 nvda_drv=1 kext-dev-mode=1</string> <key>DefaultVolume</key> <string>Macintosh HD</string> <key>Legacy</key> <string>PBR</string> <key>Log</key> <false/> <key>Secure</key> <false/> <key>Timeout</key> <integer>0</integer> <key>XMPDetection</key> <integer>1</integer> </dict> Note the default volume is set to the name of my Yosemite partition (Macintosh HD). My timeout is set at 0 because I don't want to see the Clover menu (I want speed) but you could set it to 5 to give you plenty of time to press a key. Link to comment Share on other sites More sharing options...
Slice Posted December 4, 2014 Share Posted December 4, 2014 Current Issue: 1. Cannot boot directly to new UEFI Yosemite drive - in my BIOS I have a new UEFI drive named "MAC OS X" and then my HDD. Choosing either option immediately goes black and boots to my other HDD with Chimera Yosemite installed. No Clover boot loader comes up. 2. I have three monitors running on two GTX 56-Ti-448 GUIs. Both are detected in System report however the monitor connected to the second (lower) card is not showing and does not work. Other two work fine - in HD. Still need to work on iMessage/Facetime, and Bluetooth - any pointers in the right direction would be helpful. 1. UEFI BIOS usually doesn't see the entry like /EFI/CLOVER/CLOVERX64.EFI Be sure you have /EFI/BOOT/BOOTX64.EFI - it should be seen. Really this file is the renamed Clover. 2. Multiple monitor issue is still required for investigations. iMessage etc will be working with good SN. Bluetooth will be working with good drivers. No magics here. Vanilla drivers work only with some bluetooth adapters no matter how did you set definitions at bootloader stage or in OS. Link to comment Share on other sites More sharing options...
holyfield Posted December 4, 2014 Share Posted December 4, 2014 iMessage etc will be working with good SN. Hi Slice, thx for information. A lot of people have issue with iMessage login. It's obvious for now, that Serial Number isn't enough. Several parameters should be set to get iMessage work. Please read this MLB pattern. Link to comment Share on other sites More sharing options...
Recommended Posts