JorgeMax Posted October 2, 2014 Share Posted October 2, 2014 Can anyone tell me, what is this message cosole: Link to comment Share on other sites More sharing options...
barren Posted October 3, 2014 Share Posted October 3, 2014 So my iPAD not charging over USB under power problem continues: From my IOREG I can see that the XHCI driver and DSDT edits are correctly loading, In system information I can see this: As you can see all devices are connected to the main bus via what is shown as 2 Renesas hubs. These shows up in IOREG as IOUSB:/HubDevice@14900000 and IOUSB:/HubDevice@14a00000 which are connected to XHCI Root Hub USB 2.0 Simulation @ 14. (Please note I don't have an external hub this is how the ports of the motherboard are showing) DSDT edits showing up on XHCI root: Not so on hub device: I've tried adding the current-available DSM DSDT edits to the HUB that is in the DSDT under _SB.PCI0/XHCI/RHUB but with no success. I've tried numerous Clover settings, and BIOS settings. Any one have any ideas? Darwin Dump IOREG DSDT and Clover stuff attached. barren.zip Link to comment Share on other sites More sharing options...
Maniac10 Posted October 3, 2014 Share Posted October 3, 2014 Does the iPad charge on Windows? Link to comment Share on other sites More sharing options...
Slice Posted October 3, 2014 Share Posted October 3, 2014 I recommend to all to update to 2940 before report a bug. CLOVERX64.efi-2940.zip Link to comment Share on other sites More sharing options...
copil Posted October 3, 2014 Share Posted October 3, 2014 not bat an eyelid perfect Link to comment Share on other sites More sharing options...
crusher Posted October 3, 2014 Share Posted October 3, 2014 You need to get boot.log from inside OS X not preboot.log from clover GUI. This is a boot.log Sorry Link to comment Share on other sites More sharing options...
FranticJohny Posted October 3, 2014 Share Posted October 3, 2014 Can anyone tell me, what is this message cosole: null This happens when EFI is mounted. For this reason I mount EFI only if needed. 2 Link to comment Share on other sites More sharing options...
crusher Posted October 3, 2014 Share Posted October 3, 2014 I recommend to all to update to 2940 before report a bug. CLOVERX64.efi-2940.zip Yes it work better now!!! When will it handle this 5775 Link to comment Share on other sites More sharing options...
joe75 Posted October 3, 2014 Share Posted October 3, 2014 mdworker is (metadata server worker) and its part of Spotlight indexing. If it can't find a .Spotlight-V100 folder it will report a bad path. 1 Link to comment Share on other sites More sharing options...
crusher Posted October 3, 2014 Share Posted October 3, 2014 I see now to same.But on About This Mac-Memory he sees two slots!!!! What is wrong with my graphics? Custom boot screen not used because entry has unset use graphics Failed to initialize custom boot screen: Aborted! Link to comment Share on other sites More sharing options...
crusher Posted October 3, 2014 Share Posted October 3, 2014 Nothing is wrong with graphics, it just isn't using custom boot screen, I removed that message so it's not misleading.I can't fix your issue with memory without full boot.logs......................................... Thanks for answer!! Link to comment Share on other sites More sharing options...
crusher Posted October 3, 2014 Share Posted October 3, 2014 What is this? Kernel Extensions in backtrace: com.apple.iokit.IOSurface(97.0)[B4E2654D-4087-3875-9D59-E899A0A04F0E]@0xffffff7f817b0000->0xffffff7f817c4fff Link to comment Share on other sites More sharing options...
barren Posted October 3, 2014 Share Posted October 3, 2014 Does the iPad charge on Windows? Yes! it didn't until I installed the ON/OFF Charge software. Link to comment Share on other sites More sharing options...
Slice Posted October 3, 2014 Share Posted October 3, 2014 I am not sure if XHCI driver has a charge function. Link to comment Share on other sites More sharing options...
mnfesq Posted October 3, 2014 Share Posted October 3, 2014 Is anyone else getting errors reading memory information? When I revert back to Clover version 2890, the problem goes away. Link to comment Share on other sites More sharing options...
crusher Posted October 3, 2014 Share Posted October 3, 2014 Is anyone else getting errors reading memory information? When I revert back to Clover version 2890, the problem goes away. Untitled.png Use 2939.Now work ok!!! Link to comment Share on other sites More sharing options...
mnfesq Posted October 3, 2014 Share Posted October 3, 2014 Use 2939.Now work ok!!! I am using version 2939. I also tried Slice's 2340 and had the same problem. Link to comment Share on other sites More sharing options...
Slice Posted October 4, 2014 Share Posted October 4, 2014 Is anyone else getting errors reading memory information? When I revert back to Clover version 2890, the problem goes away. Untitled.png Set Smbios->Trust=true Link to comment Share on other sites More sharing options...
mnfesq Posted October 4, 2014 Share Posted October 4, 2014 Set Smbios->Trust=true Thanks Slice. I already had Trust=true. But you pointed me in the direction of SMBIOS and that's where the solution lied. I have details about my memory in my SMBIOS but I added that it was single channel and that there were 2 slots and that fixed it. The option to include that info must be pretty new. I never noticed it before. Link to comment Share on other sites More sharing options...
barren Posted October 4, 2014 Share Posted October 4, 2014 I am not sure if XHCI driver has a charge function. So I set BIOS to XHCI Mode: Enabled XHCI hand off - Disabled EHCI hand off - Disabled Then plugged a USB 3 front port into the other internal USB 3 header port plugged in a iPad and hey presto it charges. As you can see apart from this sole USB port ALL the USB functionality on the Z87X UD5 TH is provided via 2 x Renesas uP720210 Hub chips. These are not passing the extra current that Clover/DSDT specifies. Least we now know what is going on. Link to comment Share on other sites More sharing options...
yehia2amer Posted October 5, 2014 Share Posted October 5, 2014 Let work with you. I have no experience with Clarksfield. First question. Why you set this? 4:735 0:000 Config set EnableC7: - 4:735 0:000 Config set EnableC6: + 4:735 0:000 Config set EnableC4: - 4:735 0:000 Config set EnableC2: - 4:735 0:000 Config set C3Latency: 999 Are you sure your chipset/CPU supports C6? Reduce latency to 0xFA=250 Did it ever works with other Clover revision or with other bootloader or with other OSX version? May be Yosemite is not supporting PM with MacBookAir5,2? Can you give me /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SMC_PlatformPlugin.kext/Contents/Resources/MacBookAir5_2.plist to study? I have no Yosemite. No i am not sure that my chipset/CPU supports C6 ! Speedstep works now when the machine wake from sleep, Very strange !! there is no MacBookAir5,2 in this folder, i attached the kext so you can take a look IOPlatformPluginFamily.kext 5.8.0.zip Link to comment Share on other sites More sharing options...
crusher Posted October 6, 2014 Share Posted October 6, 2014 How to fix this message in Console? PM kernel[0]: WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a Thanks in advanced!!!! Link to comment Share on other sites More sharing options...
samchen00 Posted October 7, 2014 Share Posted October 7, 2014 This happens when EFI is mounted. For this reason I mount EFI only if needed. Try : # sudo mdutil -i off /Volumes/EFI # sudo mdutil -d /Volumes/EFI You can mount EFI and no error. Link to comment Share on other sites More sharing options...
joe75 Posted October 7, 2014 Share Posted October 7, 2014 Spotlight indexing is one of the things that makes it useful and powerful and normally it should not be disabled. That said we don't really need indexing of an ESP. The correct thing to do is have .metadata_never_index file in ESP. This should be included in Clover installers imho but can also be added later by a user. 1 Link to comment Share on other sites More sharing options...
FrDakota Posted October 7, 2014 Share Posted October 7, 2014 A little question. Is it possible to have a Windows program that would allow to select the Startup Disk like BootCamp Control Panel does ? I'm able to do it from OS X but not from Windows. Thanks ! Link to comment Share on other sites More sharing options...
Recommended Posts