Clover General discussion

TheBoatman · August 18, 2014

Where you download Clover Grover?Give me a link!!!!

Thanks in advanced!!!!!

If you google CloverGrowerPro you will find this link...

https://github.com/JrCs/CloverGrowerPro

alexanderq · August 18, 2014

Corrected GCC49 build with revision 2823.

Error again

build.py...

: error 7000: Failed to start command

GenFds -f "/Users/alex/CloverGrowerPro/edk2/Clover/Clover.fdf" -o "/Users/alex/CloverGrowerPro/edk2/Build/Clover/RELEASE_GCC47" -t GCC47 -b RELEASE -p "/Users/alex/CloverGrowerPro/edk2/Clover/Clover.dsc" -a IA32 -D "EFI_SOURCE=/Users/alex/CloverGrowerPro/edk2/EdkCompatibilityPkg" -D "EDK_SOURCE=/Users/alex/CloverGrowerPro/edk2/EdkCompatibilityPkg" -D "ENABLE_VBIOS_PATCH_CLOVEREFI=TRUE" -D "TOOL_CHAIN_TAG=GCC47" -D "TOOLCHAIN=GCC47" -D "TARGET=RELEASE" -D "DISABLE_USB_SUPPORT=TRUE" -D "WORKSPACE=/Users/alex/CloverGrowerPro/edk2" -D "ONLY_SATA_0=TRUE" -D "EDK_TOOLS_PATH=/Users/alex/CloverGrowerPro/edk2/BaseTools" -D "ARCH=IA32" -D "ECP_SOURCE=/Users/alex/CloverGrowerPro/edk2/EdkCompatibilityPkg" [/users/alex/CloverGrowerPro/edk2]

- Failed -

Build end time: 16:37:28, Aug.18 2014

Build total time: 00:01:10

Cloveria32 release ERROR!!

chris1111 · August 18, 2014

Error again

build.py...

: error 7000: Failed to start command

GenFds -f "/Users/alex/CloverGrowerPro/edk2/Clover/Clover.fdf" -o "/Users/alex/CloverGrowerPro/edk2/Build/Clover/RELEASE_GCC47" -t GCC47 -b RELEASE -p "/Users/alex/CloverGrowerPro/edk2/Clover/Clover.dsc" -a IA32 -D "EFI_SOURCE=/Users/alex/CloverGrowerPro/edk2/EdkCompatibilityPkg" -D "EDK_SOURCE=/Users/alex/CloverGrowerPro/edk2/EdkCompatibilityPkg" -D "ENABLE_VBIOS_PATCH_CLOVEREFI=TRUE" -D "TOOL_CHAIN_TAG=GCC47" -D "TOOLCHAIN=GCC47" -D "TARGET=RELEASE" -D "DISABLE_USB_SUPPORT=TRUE" -D "WORKSPACE=/Users/alex/CloverGrowerPro/edk2" -D "ONLY_SATA_0=TRUE" -D "EDK_TOOLS_PATH=/Users/alex/CloverGrowerPro/edk2/BaseTools" -D "ARCH=IA32" -D "ECP_SOURCE=/Users/alex/CloverGrowerPro/edk2/EdkCompatibilityPkg" [/users/alex/CloverGrowerPro/edk2]

- Failed -

Build end time: 16:37:28, Aug.18 2014

Build total time: 00:01:10

Cloveria32 release ERROR!!

SAME HERE But Cloverx64

Slice · August 18, 2014

I am not responsible for CloverGrowerPro. I checked with ./ebuild.sh after replacing edk2/conf/tools_def.txt from Clover/Patches_to_edk2/

crusher · August 18, 2014

This is my error before restart PC

8/18/14 4:55:20.556 PM warmd[32]: [_bootcachectl_playlist_for_file:3167] Unable to generate playlist for file: 2 No such file or directory
8/18/14 4:55:20.556 PM warmd[32]: [_bootcachectl_playlist_for_file:3167] Unable to generate playlist for file: 2 No such file or directory
8/18/14 4:55:20.557 PM warmd[32]: [_bootcachectl_playlist_for_file:3167] Unable to generate playlist for file: 2 No such file or directory
8/18/14 4:55:20.557 PM warmd[32]: [_bootcachectl_playlist_for_file:3167] Unable to generate playlist for file: 2 No such file or directory
8/18/14 4:55:21.964 PM shutdown[421]: reboot by icrusher: 
8/18/14 4:55:21.964 PM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.system) System reboot initiated by: shutdown.421<-sessionlogoutd.420<-launchd.1
8/18/14 4:57:35.000 PM bootlog[0]: BOOT_TIME 1408373855 0

zozourban · August 18, 2014

Hi everybody

I have a little problem, i use clover in UEFI mode,i have a gtx 660 and motherboard : asus p8z68-v pro gen3, i want 1920x1080 resolution in clover, I tried to install the driver CsmVideoDxe, and it's works i have my resolution but the problem :

My boot's led on my motherboard is working . why ? And when i disable the driver everything work but i have 1024x768 ...

PatchVBios=true

PS. Why nobody knows this key???

It's don't working always, any idea ? :[

Slice · August 18, 2014

Error again

build.py...

: error 7000: Failed to start command

GenFds -f "/Users/alex/CloverGrowerPro/edk2/Clover/Clover.fdf" -o "/Users/alex/CloverGrowerPro/edk2/Build/Clover/RELEASE_GCC47" -t GCC47 -b RELEASE -p "/Users/alex/CloverGrowerPro/edk2/Clover/Clover.dsc" -a IA32 -D "EFI_SOURCE=/Users/alex/CloverGrowerPro/edk2/EdkCompatibilityPkg" -D "EDK_SOURCE=/Users/alex/CloverGrowerPro/edk2/EdkCompatibilityPkg" -D "ENABLE_VBIOS_PATCH_CLOVEREFI=TRUE" -D "TOOL_CHAIN_TAG=GCC47" -D "TOOLCHAIN=GCC47" -D "TARGET=RELEASE" -D "DISABLE_USB_SUPPORT=TRUE" -D "WORKSPACE=/Users/alex/CloverGrowerPro/edk2" -D "ONLY_SATA_0=TRUE" -D "EDK_TOOLS_PATH=/Users/alex/CloverGrowerPro/edk2/BaseTools" -D "ARCH=IA32" -D "ECP_SOURCE=/Users/alex/CloverGrowerPro/edk2/EdkCompatibilityPkg" [/users/alex/CloverGrowerPro/edk2]

- Failed -

Build end time: 16:37:28, Aug.18 2014

Build total time: 00:01:10

Cloveria32 release ERROR!!

This is an error of edk2 commit 15816.

Replace edk2/BaseTools/Source/Python/build/build.py

build.py.zip

Slice · August 18, 2014

Not an error, according to the commit info "… supporting a pure binary build without any complier."

Not "error", this called "mistake" or "provocation"?

sugarface · August 18, 2014

Sergey sorry ,

then the new driver Andy, are all implemented in CloverX64.efi , or not understood yet?

And another question, but this for only curiosity...what is this message that i see with 2819 ?

20140817_224543.jpg

I get this too .....

r2818/2819/2820 doesn't work for me.... reverting back to r2815

how can we fix it??

alexanderq · August 18, 2014

This is an error of edk2 commit 15816.

Replace edk2/BaseTools/Source/Python/build/build.py

build.py.zip

Thank you Slice but now i have this error

make: *** No rule to make target `fds'. Stop.

build.py...

: error 7000: Failed to execute command

make fds [/users/alex/CloverGrowerPro/edk2/Build/Clover/RELEASE_GCC47]

- Failed -

Build end time: 22:31:03, Aug.18 2014

Build total time: 00:03:25

Cloveria32 release ERROR!!

magnifico · August 18, 2014

I get this too .....

r2818/2819/2820 doesn't work for me.... reverting back to r2815

how can we fix it??

i do know...maybe Slice or Apianti have a solution..sorry

crusher · August 18, 2014

What is this?

And after restart

8/18/14 10:40:59.836 PM firmwaresyncd[36]: Command /sbin/fsck_msdos output: ** /dev/rdisk0s1
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
** Phase 3 - Checking for Orphan Clusters
Free space in FSInfo block (401861) not correct (401863)
Fix? no
73 files, 200931 KiB free (401863 clusters)

Extreme™ · August 18, 2014

And another question, but this for only curiosity...what is this message that i see with 2819 ?

20140817_224543.jpg

Hello!

Today I tried clover v2819.

All is ok...but i must confirm what is written above by Magnifico.

Before starting the verbose mode a message appear on the screen: for some fraction of a second.

I checked and it's the same message that sees Magnifico in your monitor.

A SLICE:

You can delete that message from clover v2819? In previous version of clover this does not appear.

Many thanks and best regards.

Slice · August 19, 2014

Hello!

Today I tried clover v2819.

All is ok...but i must confirm what is written above by Magnifico.

Before starting the verbose mode a message appear on the screen: for some fraction of a second.

I checked and it's the same message that sees Magnifico in your monitor.

A SLICE:

You can delete that message from clover v2819? In previous version of clover this does not appear.

Many thanks and best regards.

Done in rev 2823.

JUN Ho · August 19, 2014

Thank you Slice but now i have this error

make: *** No rule to make target `fds'. Stop.

build.py...

: error 7000: Failed to execute command

make fds [/users/alex/CloverGrowerPro/edk2/Build/Clover/RELEASE_GCC47]

- Failed -

Build end time: 22:31:03, Aug.18 2014

Build total time: 00:03:25

Cloveria32 release ERROR!!

+1

Try using CloverGrower and CloverGrowerPro, both fail with same error.

chris1111 · August 19, 2014

+1

Try using CloverGrower and CloverGrowerPro, both fail with same error.

SAME HERE

and i try to change build.py not work, try to rollback edk2, not work

For now is completely wrong !

Slice · August 19, 2014

Generating DUETEFIMAINFVX64 FV
########################################
########################################
##############################
GUID cross reference file can be found at /Users/slice/src/edk2/Build/Clover/RELEASE_GCC49/FV/Guid.xref

FV Space Information
DUETEFIMAINFVX64 [52%Full] 2752512 total, 1436400 used, 1316112 free

- Done -
Build end time: 12:23:15, Aug.19 2014
Build total time: 00:00:34

Sergeys-iMac:Clover slice$ svnversion
2826M
Sergeys-iMac:Clover slice$ cd ..
Sergeys-iMac:edk2 slice$ svnversion
15830M
Sergeys-iMac:edk2 slice$

edk2 sources modified by Patches_to_edk2 and build.py that I uploaded before.

I am using gcc-4.9.1 and GCC49 toolchain

alexanderq · August 19, 2014

Hello Slice and thank you for your answer and help but what is the point if you are building it OK and all the others are not.

Maybe it is better if you uppload a ready build Clover

magnifico · August 19, 2014

Done in rev 2823.

Sergey please ...i dont use clovergrow..can u link me this rev..i want to try

Carmine

TheBoatman · August 19, 2014

Sergey please ...i dont use clovergrow..can u link me this rev..i want to try

Carmine

~~Not Sergey.... but do u mean latest rev? http://d.pr/f/vjLU~~

Here is the new latest r2729.pkg

~~http://d.pr/f/9JVE~~ Removed.

magnifico · August 19, 2014

Not Sergey.... but do u mean latest rev? http://d.pr/f/vjLU

what is this ?

mhmm..this is not pkg a file document... :rolleyes:

alexanderq · August 19, 2014

Just rename it to magnifico.pkg and it will work. :yes:

magnifico · August 19, 2014

Just rename it to magnifico.pkg and it will work.

:lol: OMG...sorry

@Boatman thz

@ alex thz

oSxFr33k · August 19, 2014

Generating DUETEFIMAINFVX64 FV
########################################
########################################
##############################
GUID cross reference file can be found at /Users/slice/src/edk2/Build/Clover/RELEASE_GCC49/FV/Guid.xref

FV Space Information
DUETEFIMAINFVX64 [52%Full] 2752512 total, 1436400 used, 1316112 free

- Done -
Build end time: 12:23:15, Aug.19 2014
Build total time: 00:00:34

Sergeys-iMac:Clover slice$ svnversion
2826M
Sergeys-iMac:Clover slice$ cd ..
Sergeys-iMac:edk2 slice$ svnversion
15830M
Sergeys-iMac:edk2 slice$

edk2 sources modified by Patches_to_edk2 and build.py that I uploaded before.

I am using gcc-4.9.1 and GCC49 toolchain

How can we update the toolchains? I am user Clover Grower not Pro. This is the error I have and when I execute gcc --version it does not give the the version because its linked to clang for xcode. Can I just reinstall Clover Grower and it will update the toolchain to the one Slice is using 4.9.1?

Ready to build Clover 2829, Using Gcc 4.8.3

Generating DUETEFIMAINFVX64 FV
########################################
########################################
########################################
####################
GUID cross reference file can be found at /Users/osxfr33k/Downloads/CloverGrower-master/edk2/Build/Clover/RELEASE_GCC49/FV/Guid.xref

FV Space Information
DUETEFIMAINFVX64 [30%Full] 2752512 total, 834024 used, 1918488 free

- Done -
Build end time: 09:42:42, Aug.19 2014
Build total time: 00:00:35

Compressing DUETEFIMainFv.FV ...

Error: Can not open input file

CloverGrower V6.19 Cloveria32_r2829 RELEASE  ERROR!!
Good Morning.  
osxfr33ksimac2:~ osxfr33k$

tluck · August 19, 2014

here's how i updated the tool chains to 4.9.1

Note: I'm on DP6 with Xcode6-beta (and just compiling X64)

1) cd CloverGrower-master/edk2/Clover
2) mv buildgcc.sh buildgcc-4.8.sh
3) ln -s buildgcc-4.9.sh buildgcc.sh

then to preserve the old gcc and set the vars...

edited CloverGrower.command to change gccVers to 4.9.1
mv ~/src/opt/local/cross ~/src/opt/local/cross-4.8.3

run clover grower, and after it built the 4.9.1 cross compiler, i had to make a link (not sure why)

ln  ~/src/opt/local/cross/bin/x86_64-clover-linux-gnu-gcc  ~/src/opt/local/cross/x86_64-clover-linux-gnu/bin/gcc

Then, r2829 starting working for me all the way to the end today.

$ clover

Using...

/Extra/Clover_Install/CloverGrower-master/edk2

as edk2 source folder

********************************************

* Good Morning. *

* Welcome To CloverGrower V6.19 *

* This script by STLVNUB *

* Clover Credits: Slice, dmazar and others *

********************************************

Forum: http://www.projectosx.com/forum/index.php?showtopic=2562

Wiki: http://clover-wiki.zetam.org:8080/Home

Booting via Clover r2642 BOOTX64.efi with Lenovo UEFI

Stats :-Clover Stats :-WorkSpace

Clover : revision: 2829 Work Folder : /Extra/Clover_Install/CloverGrower-master

Target : X64 Available Space : 32395 MB

Compiler: GCC 4.9.1 builtPKGDIR : 103M

User: tluck running 'clover' on OS X 'Yosemite'

Clover_v2k_r2829.pkg built

CloverGrower V6.19 Good Morning. tluck, Thanks for using CloverGrower V6.19

Edited August 20, 2014 by tluck

Clover General discussion

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites