Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30,171 posts in this topic

Recommended Posts

burkett375
burkett375
Posted
Posted

Anyone? Bluetooth keyboard at GUI?I don't know if I'm ready to jump to UEFI... I don't wanna ruin my board and be left without a bootable OS lol

Just like going from chameleon to clover....once you go from legacy to uefi, you won't go back!

Link to comment
Share on other sites
ADHDMedia
ADHDMedia
Posted
Posted

Alright!  I got my board successfully updated to the new UEFI bios, and I'm up and running with UEFI Clover!  Boot times increased dramatically.  Good deal!

 

So now I'm having a couple new issues: 

 

a.   I can't sign into iMessage.

b.  The Startup Disk prefpane reboot isn't working again.  

 

Any suggestions guys?  I use iMessage a lot on my desktop while I'm working, really don't wanna have to go without it… 

 

***EDIT:  I fixed iMessage with EmuVariableUefi-64 under Drivers64UEFI.  Now on to the Startup Disk prefpane.  :) ***

Link to comment
Share on other sites
magnifico
magnifico
Posted
Posted

It is because Slice has 5 sec to gui you and others have a uefi board and that is why no one see no problem in clover boot times in lagacy where are more users and some of them still they turn back to chameleon.

in legacy mode, clover is faster than cham, trust :wink_anim: :wink_anim:
Link to comment
Share on other sites
ADHDMedia
ADHDMedia
Posted
Posted

Clover is absolutely not faster than Chameleon in legacy mode, that's a joke lol

 

But in UEFI it is definitely faster. I'm enjoying it, glad I decided to upgrade my BIOS and glad I stuck with Clover and figured it all out.

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

No comment  magnifico but maybe you will have to read what others user say about that and then say the word "trust me" easy.

But Chameleon load kexts during four minutes!

  • Like 1
Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

Guys, quick question: how do I make the sound (I've got a Realtek ALC892 chipset) work in Yosemite, using Clover as bootloader? Cause, I tried using M u l t i B e a s t  to install it (damn, I can't even say the name of the software here. Jeez! I'm not asking for support for it, but I need to make a reference to it so that people would understand what I mean!).  And it didn't work. Apparently it requires Chameleon to be installed. And I don't wanna do that cause Chameleon is still very much work in progress when it comes to Yosemite and I couldn't make it load it in my previous tries. Anyway...so, does anyone have any idea how to do that? Also, anyone else has a RTL8111 chipset for Ethernet? Did you get it working with Yosemite? Cause I didn't... I tried the same kext (the universal RTL81xx. kext made by Lnx2Mac, which works perfectly with Mavericks) and it doesn't work with Yosemite (I've got a PPPOE internet connection and it wouldn't let me configure it.)

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Guys, quick question: how do I make the sound (I've got a Realtek ALC892 chipset) work in Yosemite, using Clover as bootloader? Cause, I tried using M u l t i B e a s t (damn, I can't even say the name of the software here. Jeez! I'm not asking for support for it, but I need to make a reference to it so that people would understand what I mean!) to install it. And it didn't work. Apparently it requires Chameleon to be installed. And I don't wanna do that cause Chameleon is still very much work in progress when it comes to Yosemite and I couldn't make it load it in my previous tries. Anyway...so, does anyone have any idea how to do that? Also, anyone else has a RTL8111 chipset for Ethernet? Did you get it working with Yosemite? Cause I didn't... I tried the same kext (the universal RTL81xx. kext made by Lnx2Mac, which works perfectly with Mavericks) and it doesn't work with Yosemite (I've got a PPPOE internet connection and it wouldn't let me configure it.)

Hey,

Sound Realtek ALC892 is very good known for us. Two way to make it working

1. Search for patched AppleHDA for your system version.

2. Install VoodooHDA + AppleHDADisabler. See my signature

No matter what bootloader did you use.

 

LAN Realtek RTL8111. Lnx2Mac driver is wrong as well as official driver from Realtek site. My Realtek LAN driver works for my 8111F card.

See my signature.

  • Like 1
Link to comment
Share on other sites
Fab1Man
Fab1Man
Posted
Posted

Can anyone provide me with a working config.plist that does not require DSDT or SSDT. I'm fed up with this and I'm thinking it's 10.10's fault. How can it be possible that it just won't start anymore. My complex config.plist with (an old) DSDT and SSDT boots, pulling those entries out it crashes on AppleTyMCE (MacPro5,1 SMBIOS), which is patched by Clover on the fly. Nothing is working anymore :(.

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Hey Slice. How can I go about fixing the Startup Menu prefpane? It doesn't work anymore after upgrading to UEFI bios and UEFI boot.

More info? boot-log, darwin dump...

Link to comment
Share on other sites
alexanderq
alexanderq
Posted
Posted

But Chameleon load kexts during four minutes!

Fixed by disabling usb support and activating only sata patch in clovergrower.Still not so fast as chameleon but i dont care because is good enough and i'm not using chameleon for two years now.

Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

Hey,

Sound Realtek ALC892 is very good known for us. Two way to make it working

1. Search for patched AppleHDA for your system version.

2. Install VoodooHDA + AppleHDADisabler. See my signature

No matter what bootloader did you use.

 

LAN Realtek RTL8111. Lnx2Mac driver is wrong as well as official driver from Realtek site. My Realtek LAN driver works for my 8111F card.

See my signature.

Thanks a lot, Slice! I'll try that when I get home (I'm at work right now :D). I've also got the 8111F card. :D So I'm really looking forward to trying your driver. Yay!

About AppleHDA, since Yosemite is not out yet, I suppose I won't find much support for it to solve my problem. But I'll try the VoodooHDA + AppleHDADiabler method that you proposed and come back with feedback.

 

Thanks a LOT, man. You're awesome! :)

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Can anyone provide me with a working config.plist that does not require DSDT or SSDT. I'm fed up with this and I'm thinking it's 10.10's fault. How can it be possible that it just won't start anymore. My complex config.plist with (an old) DSDT and SSDT boots, pulling those entries out it crashes on AppleTyMCE (MacPro5,1 SMBIOS), which is patched by Clover on the fly. Nothing is working anymore :(.

May be patching by Clover is broken in new OSX? Can you provide debug.log to see if the patching is successful?

	<key>Boot</key>
	<dict>
		<key>Log</key>
		<true/>

/EFI/CLOVER/misc/debug.log

 

And upload me the kext from 10.10. I have no it.

Link to comment
Share on other sites
Fab1Man
Fab1Man
Posted
Posted

May be patching by Clover is broken in new OSX? Can you provide debug.log to see if the patching is successful?

	<key>Boot</key>
	<dict>
		<key>Log</key>
		<true/>

/EFI/CLOVER/misc/debug.log

 

And upload me the kext from 10.10. I have no it.

I'll upload it when I'm home, together with my current config.plist.

 

Weird thing is that I already had a "working" 10.10. This was when I upgraded from 10.9.3 to 10.10. FakeSMC (even an older version) was already located in S/L/E. Kext patching worked, because with MacPro5,1 SMBIOS 10.10 did boot. Just after wanting to go more vanilla, and update my DSDT (PJALM introduced a new DSDT all-in-one patch), I had to take my config.plist apart (removing DSDT and SSDT entries in order to update it with new ones). 

Link to comment
Share on other sites
magnifico
magnifico
Posted
Posted

Clover is absolutely not faster than Chameleon in legacy mode, that's a joke lol

 

But in UEFI it is definitely faster. I'm enjoying it, glad I decided to upgrade my BIOS and glad I stuck with Clover and figured it all out.

Sure?

I timed the boot time with Chameleon and clover and clover and definitely faster than Chameleon, Chameleon is a boot obsolete now.
 
Dev  sorry for this OT.
Link to comment
Share on other sites
burkett375
burkett375
Posted
Posted

Guys, quick question: how do I make the sound (I've got a Realtek ALC892 chipset) work in Yosemite, using Clover as bootloader? Cause, I tried using M u l t i B e a s t  to install it (damn, I can't even say the name of the software here. Jeez! I'm not asking for support for it, but I need to make a reference to it so that people would understand what I mean!).  And it didn't work. Apparently it requires Chameleon to be installed. And I don't wanna do that cause Chameleon is still very much work in progress when it comes to Yosemite and I couldn't make it load it in my previous tries. Anyway...so, does anyone have any idea how to do that? Also, anyone else has a RTL8111 chipset for Ethernet? Did you get it working with Yosemite? Cause I didn't... I tried the same kext (the universal RTL81xx. kext made by Lnx2Mac, which works perfectly with Mavericks) and it doesn't work with Yosemite (I've got a PPPOE internet connection and it wouldn't let me configure it.)

 

try this:

http://www.insanelymac.com/forum/topic/297207-voodoohda-285-for-mavericks-slice-anv-signed/

 

I used the Lnx2Mac drivers and it worked perfectly.  Have same chip as you.  Not sure where to go with that...

Link to comment
Share on other sites
arsradu
arsradu
Posted
Posted

Hey,

Sound Realtek ALC892 is very good known for us. Two way to make it working

1. Search for patched AppleHDA for your system version.

2. Install VoodooHDA + AppleHDADisabler. See my signature

No matter what bootloader did you use.

 

LAN Realtek RTL8111. Lnx2Mac driver is wrong as well as official driver from Realtek site. My Realtek LAN driver works for my 8111F card.

See my signature.

Hey man

 

So I got home and tried your Realtek kext. But I must have done something wrong (or didn't do something) cause it still wouldn't let me add a PPPOE connection.

What I did:

1. copy-paste R1000.kext into S/L/E

2. open terminal and input the following command to repair permissions:

diskutil repairPermissions /

3. reboot

 

I didn't get to try the audio kext yet cause I thought I'd better start one step at a time. So...did I do something wrong? 

Link to comment
Share on other sites
Slice
Slice
Posted
Posted

Hey Slice, clover boot loader brings a lot of artifacts on HD3000. Never happened with other boot loader. Would you mind helping?

 

Yes, it is already resolved. Add slide=0 to boot-args

	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>-v slide=0</string>

Why? Mistique. But works.

 

 

Hey man

 

So I got home and tried your Realtek kext. But I must have done something wrong (or didn't do something) cause it still wouldn't let me add a PPPOE connection.

What I did:

1. copy-paste R1000.kext into S/L/E

2. open terminal and input the following command to repair permissions:

diskutil repairPermissions /

3. reboot

 

I didn't get to try the audio kext yet cause I thought I'd better start one step at a time. So...did I do something wrong? 

If you'll copy by command line in terminal it will be more reliable

sudo -s
cp -r -v ~/Downloads/RealtekR1000SL.kext /S*/L*/Ex*/

Then you can drag a cache to trash. Or by command

rm -r -v /System/Library/Caches/com.apple.kext.caches/Startup/*

AND NO REPAIR PERMISIIONS !!! They are good with these commands.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...