Slice Posted March 25, 2014 Share Posted March 25, 2014 Hello community ! Have a little issue with updating clover, i have installed the latest one ( 2652 ) but my laptop boot every time with the last clover ( 2636 ), on the clover updater it show that the last installed revision is the 2652, but the current booted revision is the 2636. Probook 4540s / osx 10.9.2 Here is the boot.log if necessary : http://pastebin.com/MZ5fHRKb Thank you for help. Replace file CLOVERX64.efi manually. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2007368 Share on other sites More sharing options...
Time2win Posted March 25, 2014 Share Posted March 25, 2014 Replace file CLOVERX64.efi manually. I dont know if its right ( correct me if am wrong ) , but i have removed the CLOVERX64.efi file from efi partition then i have updated to the latest revision, without success.. its show always that the 2652 is installed but it boot on the 2636. BTW where i can see clover change log ? Thanks. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2007409 Share on other sites More sharing options...
Dontview Posted March 25, 2014 Share Posted March 25, 2014 Anyone else having problems booting up windows 8.1 uefi?I can boot via bios boot loader....but not via clover.The windows loading symbol is spinning, but after this just a black screen appears . Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2007443 Share on other sites More sharing options...
kjp4756 Posted March 25, 2014 Share Posted March 25, 2014 Since updating clover recently I now have a boot from EFI menu entry. I think this is my EFI partition showing up. I don't recall having this before. How can I remove this entry? I see someone asked a similar question on projectosx however I cannot connect to that site for some reason. Thank you. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2007472 Share on other sites More sharing options...
Thunderbolt Posted March 26, 2014 Share Posted March 26, 2014 I am getting this EFI Bios menu and cannot continue, searching for this showed up cloverx64.efi is not found and I have copied it to /EFI/Boot/ but still not working. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2007609 Share on other sites More sharing options...
Slice Posted March 26, 2014 Share Posted March 26, 2014 I am getting this EFI Bios menu and cannot continue, searching for this showed up cloverx64.efi is not found and I have copied it to /EFI/Boot/ but still not working. Copy from /EFI/CLOVER/CLOVERX64.EFI to /EFI/BOOT/BOOTX64.EFI or vice versa. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2007612 Share on other sites More sharing options...
Thunderbolt Posted March 26, 2014 Share Posted March 26, 2014 Copy from /EFI/CLOVER/CLOVERX64.EFI to /EFI/BOOT/BOOTX64.EFI or vice versa. You mean I overwrite bootx64.efi with cloverx64.efi and vice versa ? or copy cloverx64.efi to /EFI/BOOT ? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2007616 Share on other sites More sharing options...
Slice Posted March 26, 2014 Share Posted March 26, 2014 You mean I overwrite bootx64.efi with cloverx64.efi and vice versa ? or copy cloverx64.efi to /EFI/BOOT ? override. That means bootx64.efi is a renamed cloverx64.efi. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2007674 Share on other sites More sharing options...
cool_recep Posted March 26, 2014 Share Posted March 26, 2014 Hi guys, Why am I always booting into repair or recovery ? http://www.youtube.com/watch?v=EHMoF9Vbg5g Here is my partiton layout: Thanks. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2007759 Share on other sites More sharing options...
Thunderbolt Posted March 28, 2014 Share Posted March 28, 2014 override. That means bootx64.efi is a renamed cloverx64.efi. Hi , I had to resin tall from scratch hence I installed Maverics first and then Lubuntu, and then booted to Mavericks using the my hack usb and installed clover with EXT4.efi but I do not see the Linux there, It had worked the first time but now it just does not show up. I can boot to Mavericks from clover though. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008108 Share on other sites More sharing options...
ZenGiga Posted March 28, 2014 Share Posted March 28, 2014 Have a little issue with updating clover, i have installed the latest one ( 2652 ) but my laptop boot every time with the last clover ( 2636 ), on the clover updater it show that the last installed revision is the 2652, but the current booted revision is the 2636. Probook 4540s / osx 10.9.2 I saw similar behaviour a couple of months ago after adding a hybrid SDHD disk to my desktop, and the install log always said everything was fine, no errors – there was problem with the Clover installer that *was* fixed. The other thing to check is that you're not booting from a different disk, USB key or whatever because of BIOS boot priority. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008109 Share on other sites More sharing options...
toleda Posted March 29, 2014 Share Posted March 29, 2014 What does boot argument -xcpm/true do? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008349 Share on other sites More sharing options...
Slice Posted March 29, 2014 Share Posted March 29, 2014 What does boot argument -xcpm/true do? Clover has no such argument. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008388 Share on other sites More sharing options...
toleda Posted March 29, 2014 Share Posted March 29, 2014 Clover has no such argument. Thanks. Basis for question: 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008461 Share on other sites More sharing options...
TheBoatman Posted March 30, 2014 Share Posted March 30, 2014 @Slice. Just a acknowledgement and apprec to JrCs for fixing CloverGrowerPro 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008532 Share on other sites More sharing options...
Maniac10 Posted March 30, 2014 Share Posted March 30, 2014 @toleda: those are all kernel or third party arguments, none Clover's. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008535 Share on other sites More sharing options...
Mammoth Posted March 30, 2014 Share Posted March 30, 2014 Hello all, trying to get up to speed with Clover, and have it installed on a few machines now. However, I can't get it to work on my GA-Z77X-UP7 tower. It has worked fine for years with Chameleon, no problems, but I can NOT get Clover to see my OS X on other drives partitions, AT ALL! I've tried so many combinations, but never once has it even begun to work (what I mean is, once Clover boots, it NEVER sees my other drives where OS X is). I've attached a picture of my drives / partition configs (as seen from within Windows 7 with Paragon hard disk Manager 12 Suite... which is AMAZING by the way!) With Chameleon (and by the way, at anytime I can boot from my Chameleon USB stick and like magic, all my drives are there and I can select and boot any of them), I have always had Chameleon installed on the Partition "Cham". Now, I just tried moving/re-sizing the partitions to squeeze in that new (as of today) EFI FAT32 w/ 4k sectors partition, install Clover there, even REMOVE (unplug) the Neutron SSD, install Clover (with almost EVERY driver), and STILL Clover will NOT see the drives / partitions on (HPT DISK 0_0)! Now, the HPT disks are a 2 SSD drive RAID 1 on a Highpoint Tech RocketRAID 2720 controller (complete with the newest 10.9 official drivers from Highpoint, but again, Chameleon has always been able to see them, even now with no problems). So, please... what is the problem and what is the solution? Thanks... pretty frustrated at this point as I always prefer to do everything I can first to figure things out, but now I'm just spent!!! As always, appreciate everyone here, and Clover is a technological masterpiece from the future (or Russia)!!! ; ) Going to be great once I really understand it and can work with it well! Hello community ! Have a little issue with updating clover, i have installed the latest one ( 2652 ) but my laptop boot every time with the last clover ( 2636 ), on the clover updater it show that the last installed revision is the 2652, but the current booted revision is the 2636. Probook 4540s / osx 10.9.2 Here is the boot.log if necessary : http://pastebin.com/MZ5fHRKb Thank you for help. I had this same problem today, and what I found was that Clover was not booting BOOT from where I thought it was (it was picking it up from another partition). I made the needed changes to point it where I wanted it to be, and then deleted the other entry. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008542 Share on other sites More sharing options...
Mammoth Posted March 30, 2014 Share Posted March 30, 2014 OK... this is crazy. I finally had enough for today and decided to put everything back the way it was and move on to doing other life things. This included removing the BOOT files from other drives/part I had copied them to, clearing CMOS, using Chameleon booted from USB stick and reinstalling Clover (v2652 by the way, and which I have installed/and re-installed more times than I could count by now), which, when done, would have left me with being able to boot into my NTFS (Windows 7) with Clover installed, then when needed, get to OS X by booting from my Chameleon USB stick... When Clover came up after all of this... I had all drives... Seriously, I have done this same thing I don't know how many times over the last couple of weeks... my GUESS is that today is the first time I attempted to create a FAT32 w/ 4k cluster EFI partition. When I initially created and started to use it, I had NAMED it EFI, but of course that does not MAKE it an 'EFI' partition. When I first installed Clover to this new partition, Clover did NOT 'make' it an EFI partition. Now that it's working, and I do a 'diskpart list', I see this partition is still not (correct me if I'm wrong), an EFI partition but now has TYPE 'DOS_FAT_16'. I for sure created as FAT32, so Clover must have changed it to DOS_FAT_16, right? Yes, No? And perhaps this is why it is working now, for the very first time ever? I was then finally able to launch 'Generate Config File' and copy it to EFI/Clover, and then use Clover PrefPane to point to EFI/Clover. On restart, it ALMOST booted perfectly, but then restarted just before GUI. Selected to Inject nvidia, and then the next time it booted perfectly and I'm in now, under Clover. This Clover is POWERFUL, but you need space shuttle training to fly it! Any comments... welcome... Oh... I have a few more questions: I do eventually want to figure out how to make my machine fully configured as UEFI only, but is this possible / a good idea if... 1) My Galaxy (nVida) GT570 GPU is NOT GOP compliant. 2) My Highpoint Tech SAS RocketRAID 2720 controller is BIOS compliant only. Thanks all!! Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008549 Share on other sites More sharing options...
hooda Posted March 30, 2014 Share Posted March 30, 2014 news in clover after for along time with chameleon. now,, i have any trouble.. each time i plugin my flashdisk.. my pc always reboot.. is there any setting that i miss in config.plist..?! thanks in advance.. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008551 Share on other sites More sharing options...
hooda Posted March 30, 2014 Share Posted March 30, 2014 news in clover after for along time with chameleon. now,, i have any trouble.. each time i plugin my flashdisk.. my pc always reboot.. is there any setting that i miss in config.plist..?! thanks in advance.. My problem solved, when i checked "No Cache" mark. Thanks.. it great bootloader. the NeXT bootloader.. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008575 Share on other sites More sharing options...
Slice Posted March 30, 2014 Share Posted March 30, 2014 Thanks. Basis for question: Screen Shot 2014-03-29 at 1.33.01 PM.png Sorry, I have no responsibility for "Clover Configurator". Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008706 Share on other sites More sharing options...
kyndder Posted March 31, 2014 Share Posted March 31, 2014 What does boot argument -xcpm/true do? I think that option is refering to this > http://clover-wiki.zetam.org/Configuration/Boot#XMPDetection Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008911 Share on other sites More sharing options...
Maniac10 Posted March 31, 2014 Share Posted March 31, 2014 It's related to "Xnu CPU Power Management". "-xcpm" is listed in that article as a boot argument found in mach_kernel. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008965 Share on other sites More sharing options...
kyndder Posted March 31, 2014 Share Posted March 31, 2014 It's related to "Xnu CPU Power Management". "-xcpm" is listed in that article as a boot argument found in mach_kernel. Yes, you are right... I've just saw at toleda's SS that it is a boot argument... Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2008968 Share on other sites More sharing options...
tluck Posted April 1, 2014 Share Posted April 1, 2014 does anyone have a HD 2500 only config they can share. i have an H61-USB3 with i3-3240 (HD 2500 only) config. it will NOT bring up the gfx acceleration - shows white/colored snow. any tips? i tried various ig-platform-ids. can only boot in safe-mode - full res (1920x1200) on dvi. any help is appreciated. thanks. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/165/#findComment-2009157 Share on other sites More sharing options...
Recommended Posts