Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30,155 posts in this topic

Recommended Posts

toleda
toleda
Posted
Posted

Sorry for not being clear i meant HDMI output was working OK only with that config.plist and now it is not

Still not clear, is the problem HDMI audio not working in 2582?  if yes, attach the last patched dsdt in EFI/Clover/ACPI/origin.  If nothing there, set config.plist/ACPI/DSDT/Debug/YES and restart.

Link to comment
Share on other sites
naiclub
naiclub
Posted
Posted

Useless. Cannot help without the files requested.  

Hello Toleda 

I have a comment

I edited 10.9.213c53 results on Iris Pro 3 audio ports, DVI display port HDMI.

Working without injections, the Azul.
AppleHDA sound still does not work , as it is true that the clover.
Actually Clover Inject the sound to then ready to use. It is not a critical component.
Including Platforms.xml.zlib layout1.xml.zlib layout2.xml.zlib layout3.xml.zlib
AppleHDA.kext / Contents / Plugins / AppleHDAHardwareConfigDriver.kext / Contents / Info.plist. This is not the mind. It also had to edit these files as close to MacOSX or not to fix it are very good.
Agreed that the comments you how.  :D  :D
 
We conclude that Clover can do as we want to be one.Screenshot+2014-02-10+05.35.54.png
Link to comment
Share on other sites
Demonbane
Demonbane
Posted
Posted

 

version: r2577

 

since this version, my clover can't boot anymore. since i booted the mac dist, then the screen turned to black and no ther signals. not even some words, only completely black! is it the only problem for me?

 

 

Before or after CloverGUI?

Legacy boot or UEFI boot?

64 or 32 bit?

 

after r2563  exactly,

 

boot under UEFI and Legacy is the same, and i also tried the original config.plist, but still black screen, no response

Link to comment
Share on other sites
toleda
toleda
Posted
Posted

Sorry for late reply and yes hdmi audio is not working in 2582.

dsdt shows HDAU edit is correct.  GFX0 is not correct, hda-gfx is missing.

GFX0 should be:

                Device (GFX0)
                {
                    Name (_ADR, One)
                    Method (_DSM, 4, NotSerialized)
                    {
                        Store (Package (0x06)
                            {
                                "hda-gfx", 
                                Buffer (0x0A)
                                {
                                    "onboard-1"
                                }
                            }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                }

AppleHDA sound still does not work , as it is true that the clover.

We conclude that Clover can do as we want to be one.

Outstanding.

Regarding audio, 10.9.1 AppleHDA binary is not compatible with 10.9.2 AppleHDA,kext.

Install native AppleHDA.kext (C53). Run script for 10.9.2 AppleHDA898.kext, toleda/audio_CloverALC

  • Like 1
Link to comment
Share on other sites
naiclub
naiclub
Posted
Posted 
Outstanding.

Regarding audio, 10.9.1 AppleHDA binary is not compatible with 10.9.2 AppleHDA,kext.

Install native AppleHDA.kext (C53). Run script for 10.9.2 AppleHDA898.kext, toleda/audio_CloverALC

I would say that the most satisfied lot. And I think, but from now on, we will update. Without repeated use of this patch. :thumbsup_anim:  :thumbsup_anim:

And I said that I love Clover. :D  :D

Link to comment
Share on other sites
khe91
khe91
Posted
Posted

Clover is now looking if OSX is hibernated.

I never use sleep and enabled the NeverHibernate in config.plist.

Thought it will disable all the Hibernation checking.

 

<key>Boot</key>

<dict>

<key>NeverHibernate</key>

<true/>

<key>Log</key>

<true/>

</dict>

 

But still a lot of hibernation checking is done:

 

0:831 0:011 Check if volume Is Hibernated:

0:832 0:001 Check sleep image 'by signature':

0:842 0:009 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success

0:844 0:001 SleepImage name from pref: ImageVolume = 'SSD1_P1_RESCUE', ImageName = '\private\var\vm\sleepimage'

0:852 0:007 Reading first 512 bytes of sleepimage ...

0:854 0:002 OurBlockIoRead: Lba=11E4288, Offset=23C851000 (BlockSize=512)

0:856 0:001 sig lion: 0

0:857 0:001 sig snow: 0

0:859 0:001 no valid sleep image offset was found

0:860 0:001 Reading completed -> Success

◊fÖ¿uÏHˇKHÉ{(ˇHã{uHâ{(H;{ vHâ{ Ä{:uHâ˝IºHeÎ$Hãk IºHeH;k(s›∫ HâÒHˇ≈Aˇ‘ÎÍH;k s∑S8HâÒHˇ≈Aˇ‘ÎÎH«CIºã_HΩHeH9{sHâŸAˇ‘HâÒ∑–ˇ’ÎÍÄ{:u#Hã{ HΩHeH;{(s∫ HâÒHˇ«ˇ’ÎÎHɃ [^_]A\√AVAUATUWVSHâÀHÉÏ`HÖ…ÑÿH∏0¶Äx0tH°XÛHã@@H9ÅàÑ≠π»HøÓ™Hæ ġ◊HÖ¿HâD$8ÑÜπˇ◊HÖ¿Hâ≈uHãL$8H∏V¨ˇ–ÈaHç@Lçt$ HæeH«C8H«C0:875 0:002 sleepimage offset could not be acquired

0:877 0:001 hibernated: no - sign

0:889 0:012 found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,CE8177C6-3CB8-457D-8668-71E5B54FFF97,0x64028,0x37E11D8)\System\Library\CoreServices\boot.efi

0:929 0:040 4: ''

0:968 0:039 5: 'Boot OS X'

0:975 0:006 Check if volume Is Hibernated:

0:977 0:001 Check sleep image 'by signature':

0:978 0:001 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found

0:980 0:001 using default sleep image name = \private\var\vm\sleepimage

0:983 0:003 sleepimage not found -> Not Found

0:984 0:001 hibernated: no - sign

0:990 0:005 found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,C4DC92EA-1252-47CC-871E-FBDD7C4A62FE,0xDF54B88,0x40000)\System\Library\CoreServices\boot.efi

1:028 0:038 6: 'EFI'

1:067 0:039 7: 'SSD2_P1_10-9-2-13C53'

1:086 0:019 Check if volume Is Hibernated:

1:088 0:001 Check sleep image 'by signature':

1:099 0:011 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success

1:103 0:003 SleepImage name from pref: ImageVolume = 'SSD2_P1_10-9-2-13C53', ImageName = '\private\var\vm\sleepimage'

1:111 0:007 Reading first 512 bytes of sleepimage ...

1:113 0:002 OurBlockIoRead: Lba=2064128, Offset=40C825000 (BlockSize=512)

1:114 0:001 sig lion: 32323962

1:116 0:001 sig snow: 64632D39

1:117 0:001 no valid sleep image offset was found

1:119 0:001 Reading completed -> Success

1:120 0:001 sleepimage offset could not be acquired

1:123 0:003 hibernated: no - sign

 

So what is the NeverHibernate all about then ?

Link to comment
Share on other sites
alexanderq
alexanderq
Posted
Posted

dsdt shows HDAU edit is correct.  GFX0 is not correct, hda-gfx is missing.

GFX0 should be:

                Device (GFX0)
                {
                    Name (_ADR, One)
                    Method (_DSM, 4, NotSerialized)
                    {
                        Store (Package (0x06)
                            {
                                "hda-gfx", 
                                Buffer (0x0A)
                                {
                                    "onboard-1"
                                }
                            }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                }

Thank you for your answer and for helping us.I wonder why clover devs modified clover so GFX0 not to be injected on latest clover versions when before 2566 that was ok.No one else has this problem with HDMI audio or no one else uses HDMI output .

Can i inject it with config.plist until is fixed or  i have to use old version?

Link to comment
Share on other sites
toleda
toleda
Posted
Posted

I wonder why clover devs modified clover so GFX0 not to be injected on latest clover versions when before 2566 that was ok.

Can i inject it with config.plist until is fixed or  i have to use old version?

See http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=1991331 and http://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?p=1992102

 

config.plistAddPropertyGFX0/hda-gfx injection is not working.  

Work arounds.  1. Add hda-gfx infection to the Clover edited dsdt as noted above and install dsdt.aml in EFI/Clover/ACPI/Patched

or 2. revert to 2566 and put Clover_2583+ on a USB for testing until ACPI/DSDT/Fixes/HDMI audio is working.

  • Like 1
Link to comment
Share on other sites
DocShadow
DocShadow
Posted
Posted

Installed Clover on a USB stick.  All worked fine and I was able to boot from the USB to Marvericks.

 

Today I tried to boot from the stick and I received an error .... boot1f: error

 

I made another USB stick using CloverGrower, added the necessary DSDT file and kext's but same error.

 

Any input would be appreciated.

 

Thanks.

Link to comment
Share on other sites
DocShadow
DocShadow
Posted
Posted

Installed Clover on a USB stick.  All worked fine and I was able to boot from the USB to Marvericks.

 

Today I tried to boot from the stick and I received an error .... boot1f: error

 

I made another USB stick using CloverGrower, added the necessary DSDT file and kext's but same error.

 

Any input would be appreciated.

 

Thanks.

 

SOLVED ...

 

Used a brand new USB stick and everything work as it should.

 

Original USB stick was corrupted.  As for the other USB stick, I incorrectly installed Clover.   :blush:

Link to comment
Share on other sites
naiclub
naiclub
Posted
Posted

Sorry, I should have been more specific.

 

I already have fixed dsdt which works very well. I uploaded the files because I thought it might help you fix the problem with clover.

 

Thanks anyway :)

 

<key>Devices</key>

<dict>
<key>AddProperties</key>
<array>
<dict>
<key>Device</key>
<string>HDAU</string>
<key>Key</key>
<string>hda-gfx</string>
<key>Value</key>
<string>onboard-2</string>
</dict>
 

 

 

Link to comment
Share on other sites
cvad
cvad
Posted
Posted

It builds again, even if the latest version was already build.

Preferences where I can set the path for the sources would be nice.

And a option to choose what version to build even better.

You can safely edit working script in app Resources.

  • Like 1
Link to comment
Share on other sites
naiclub
naiclub
Posted
Posted

You can safely edit working script in app Resources.

Clover_v2k_r0.pkg

Why I was BOOTX64.efi BOOTIA32.efi CLOVERIA32.efi CLOVERX64.efi Clover_v2k_r0 then disappear in the drivers64UEFI. Lost but HFSPlus-64.efi Please explain

Link to comment
Share on other sites
cvad
cvad
Posted
Posted

Clover_v2k_r0.pkg

Why I was BOOTX64.efi BOOTIA32.efi CLOVERIA32.efi CLOVERX64.efi Clover_v2k_r0 then disappear in the drivers64UEFI. Lost but HFSPlus-64.efi Please explain

In this script edition only release a compilation of the 64-bit version of the Clover bootloader.

We also use the free version VBoxHfs.efi. If you want to use a HFSPlus.efi, you need to correct the scripts.

 

What is the difference between this and clovergrower?

That is a matter of taste (На вкус и цвет товарищей нет).

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...