Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30,171 posts in this topic

Recommended Posts

dmazar
dmazar
Posted
Posted

Clover start ML with UEFI mode is veryyyyyy slow on my Thinkpad W520, then, mouse and keyboard no work;

But when i boot with BIOS mode, it is work fine, except screen resolution is lower than UEFI mode.

This looks like the problem that miaumiau and TimeWalker had on their laptops with Phoenix UEFI. You can find more about this here.

 

I seem to have a problem with kext cache or something else....

Looks like not working after all. Does Clover detects your Boot helper partition? Can you make preboot.log by pressing F2 in Clover GUI. Should be stored on writable FAT32 USB stick partition or EFI partition.

Link to comment
Share on other sites
Taruga
Taruga
Posted
Posted

Hi dmazar,

 

I have several disks, and I can boot from non raid volumes.

 

When I boot Clover I can see the Boot helper partition, but I can't boot from it.

 

This is my preboot.log:

 

Log from Clover size=86:
MsgLog Protocol installed in PartitionDxe
MsgLog Protocol installed in AcpiPlatform

Starting rEFIt rev 800 on CLOVER EFI
SelfDevicePath=PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)/HD(1,MBR,0x00000000,0x2,0x7A601E) @1F4B3718
banner logo.png
Found best mode 3: 1280x1024
Available graphics modes for refit.conf screen_resolution:
Curr. Mode = 3, MaxMode = 4, FB = E9000000, FB size=0xE00000
- Mode 0: 640x480 PixFmt = 8bit BGR, PixPerScanLine = 640
- Mode 1: 800x600 PixFmt = 8bit BGR, PixPerScanLine = 800
- Mode 2: 1024x768 PixFmt = 8bit BGR, PixPerScanLine = 1024
- Mode 3: 1280x1024 PixFmt = 8bit BGR, PixPerScanLine = 1280
Theme: black_green Path: EFI\BOOT\themes\black_green
Total Memory Slots Count = 4
Type 17 Index = 0
SmbiosTable.Type17->Speed = 1333
SmbiosTable.Type17->Size = 4096
mTotalSystemMemory = 4096
Type 17 Index = 1
SmbiosTable.Type17->Speed = 1333
SmbiosTable.Type17->Size = 4096
mTotalSystemMemory = 8192
Type 17 Index = 2
SmbiosTable.Type17->Speed = 1333
SmbiosTable.Type17->Size = 4096
mTotalSystemMemory = 12288
Type 17 Index = 3
SmbiosTable.Type17->Speed = 1333
SmbiosTable.Type17->Size = 4096
mTotalSystemMemory = 16384
Boot status=0
Clover revision: 800 running on To be filled by O.E.M.
... with board Z77X-UD5H
[0:000 - 0:000] LoadDrivers() start
Starting FSInject-64.efi
Using load options 'FSInject-64.efi '
Starting Ps2MouseDxe-64.efi
Using load options 'Ps2MouseDxe-64.efi '
Starting UsbMouseDxe-64.efi
Using load options 'UsbMouseDxe-64.efi '
Starting VBoxExt2-64.efi
Using load options 'VBoxExt2-64.efi '
Starting XhciDxe-64.efi
Using load options 'XhciDxe-64.efi '
[0:405 - 0:405] LoadDrivers() end
reinit: self device path=PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)/HD(1,MBR,0x00000000,0x2,0x7A601E)
new SelfHandle=1F4B3718
BrandString = Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
non-usable FLEX_RATIO = F0000
corrected FLEX_RATIO = E0000
FSBFrequency=105MHz
Corrected FSBFrequency=100MHz
qpimult 2
qpibusspeed 400000kHz
Vendor/Model/Stepping: 0x756E6547/0x3A/0x9
Family/ExtFamily: 0x6/0x0
MaxDiv/MinDiv: 35.0/16
Turbo: 37/38/39/39
Features: 0xBFEBFBFF
Threads: 8
Cores: 4
FSB: 100 MHz
CPU: 3700 MHz
TSC: 3700 MHz
PIS: 400 MHz
PCI (00|00:00.00) : 8086 0150 class=060000
PCI (00|00:01.00) : 8086 0151 class=060400
PCI (00|01:00.00) : 10DE 1200 class=030000
Found NVidia model=Gigabyte GeForce GTX 560 Ti
PCI (00|01:00.01) : 10DE 0E0C class=040300
PCI (00|00:02.00) : 8086 0162 class=038000
PCI (00|00:14.00) : 8086 1E31 class=0C0330
PCI (00|00:16.00) : 8086 1E3A class=078000
PCI (00|00:1A.00) : 8086 1E2D class=0C0320
PCI (00|00:1B.00) : 8086 1E20 class=040300
PCI (00|00:1C.00) : 8086 1E10 class=060400
PCI (00|00:1C.01) : 8086 1E12 class=060400
PCI (00|03:00.00) : 1B4B 9172 class=010601
PCI (00|00:1C.03) : 8086 1E16 class=060400
PCI (00|04:00.00) : 104C 823E class=060400
PCI (00|05:00.00) : 104C 823F class=0C0010
PCI (00|00:1C.04) : 8086 1E18 class=060400
PCI (00|06:00.00) : 14E4 432B class=028000
Found AirPort. Landing enabled...
PCI (00|00:1C.05) : 8086 244E class=060401
PCI (00|07:00.00) : 8086 244E class=060401
PCI (00|08:01.00) : 1106 3044 class=0C0010
PCI (00|00:1C.06) : 8086 1E1C class=060400
PCI (00|09:00.00) : 1969 1083 class=020000
PCI (00|00:1C.07) : 8086 1E1E class=060400
PCI (00|0A:00.00) : 1B4B 9172 class=010601
PCI (00|00:1D.00) : 8086 1E26 class=0C0320
PCI (00|00:1F.00) : 8086 1E44 class=060100
PCI (00|00:1F.02) : 8086 1E02 class=010601
PCI (00|00:1F.03) : 8086 1E22 class=0C0500
SMBus CmdReg: 0x3
Scanning SMBus [8086:1E22], mmio: 0xF6F15004, ioport: 0xF040, hostc: 0x1
SPD[0] (size): 0x92 @0x50
DDR speed 1333MHz
Slot: 0 Type 24 4096MB (DDR3 SDRAM) 1333MHz Vendor=Corsair
PartNo=CMZ16GX3M4X1600C9 SerialNo=00000000
SPD[0] (size): 0x92 @0x51
DDR speed 1333MHz
Slot: 1 Type 24 4096MB (DDR3 SDRAM) 1333MHz Vendor=Corsair
PartNo=CMZ16GX3M4X1600C9 SerialNo=00000000
SPD[0] (size): 0x92 @0x52
DDR speed 1333MHz
Slot: 2 Type 24 4096MB (DDR3 SDRAM) 1333MHz Vendor=Corsair
PartNo=CMZ16GX3M4X1600C9 SerialNo=00000000
SPD[0] (size): 0x92 @0x53
DDR speed 1333MHz
Slot: 3 Type 24 4096MB (DDR3 SDRAM) 1333MHz Vendor=Corsair
PartNo=CMZ16GX3M4X1600C9 SerialNo=00000000
Calibrated TSC frequency =3503496960 =3503MHz
CPU calculated TSC frequency =3700000000
Using OEM config.plist at path: EFI\config.plist
Finally: Bus=100MHz CPU=3500MHz
File=font\WoB_PTMono_10W_NA.png loaded with status=Success length=3049
extension = png
compression method 8 and CINFO=7 FDICT=0
found 25 volumes with blockIO
* PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)
USB volume
USB volume
this is SelfVolume at index 1
* PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)/HD(1,MBR,0x00000000,0x2,0x7A601E)
USB volume
USB volume
* PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x3,0x0)/USB(0x0,0x0)/USB(0x0,0x0)
USB volume
USB volume
USB volume
USB volume
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x5,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(1,GPT,1399EABD-3B8F-4116-A22D-7B7FC3BD171A,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(2,GPT,528BCB5E-39A6-4789-9114-2AAE2F50B810,0x64028,0x1BE80460)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(3,GPT,C5D78866-DD70-4F70-83E9-12FB06E9896C,0x1BEE4488,0x40000)
Booting OS 10.8.2
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0,0x0)/HD(1,GPT,7831BD74-24D7-44B1-BFB8-7233E0EBEDF0,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0,0x0)/HD(2,GPT,275A3C0A-2C01-4F7D-A31E-589612CD10DD,0x64028,0x74662D60)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0x0,0x0)/HD(1,GPT,33815E30-02B7-4461-BFE5-6A3FF45FCA8F,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0x0,0x0)/HD(2,GPT,4C36FA93-024F-4C27-AE2A-ACE92B903554,0x64028,0x3A2E1FE0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(1,GPT,C7479120-EF6F-4FB0-80B1-40FBFB7462E5,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(2,GPT,58650676-71D4-4C5A-A6A2-09006448A1CA,0x64028,0x1D170FF0)
Booting OS 10.8.2
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(3,GPT,927F2BEB-5966-40AC-B1D5-C5FD3E673EAC,0x1D215018,0x1A4CF600)
Booting OS 10.7.5
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(4,GPT,85E4EDEC-44AC-453F-977D-8577BB0587B0,0x37724618,0x2C219F0)
Booting OS 10.8
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(1,GPT,2F69768E-8F45-4029-AD86-872FDA580F01,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(2,GPT,52CB117E-C745-482B-98EC-8C526784423D,0x64028,0x3A2E1FE0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x5,0x0,0x0)/HD(1,GPT,9E7319EC-7716-4551-A18F-EDC1328D01A2,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x5,0x0,0x0)/HD(2,GPT,4DF03E8D-C58F-46BC-B45D-D6FF6E24013B,0x64028,0x1BE80460)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x5,0x0,0x0)/HD(3,GPT,C3B89DCF-AAEC-4209-8B30-DB828E9A30DD,0x1BEE4488,0x40000)
Booting OS 10.8.2
Searching volumes for latest nvram.plist ...
1. Volume '', GUID = <null guid> - not GPT - no nvram.plist - skipping!
9. Volume 'EFI', GUID = 1399EABD-3B8F-4116-A22D-7B7FC3BD171A - no nvram.plist - skipping!
11. Volume 'Boot OS X', GUID = C5D78866-DD70-4F70-83E9-12FB06E9896C Modified = 2012-10-26 22:57:3 (3628882623000 ms) - newer - will use this one
12. Volume '', GUID = 7831BD74-24D7-44B1-BFB8-7233E0EBEDF0 - no nvram.plist - skipping!
13. Volume 'MISC', GUID = 275A3C0A-2C01-4F7D-A31E-589612CD10DD - no nvram.plist - skipping!
14. Volume '', GUID = 33815E30-02B7-4461-BFE5-6A3FF45FCA8F - no nvram.plist - skipping!
15. Volume 'TVSeries', GUID = 4C36FA93-024F-4C27-AE2A-ACE92B903554 - no nvram.plist - skipping!
16. Volume 'EFI', GUID = C7479120-EF6F-4FB0-80B1-40FBFB7462E5 - no nvram.plist - skipping!
17. Volume 'MLion', GUID = 58650676-71D4-4C5A-A6A2-09006448A1CA Modified = 2012-10-28 15:44:16 (3629029456000 ms) - newer - will use this one
18. Volume 'Lion', GUID = 927F2BEB-5966-40AC-B1D5-C5FD3E673EAC - no nvram.plist - skipping!
19. Volume 'Mac OS X Base System', GUID = 85E4EDEC-44AC-453F-977D-8577BB0587B0 - no nvram.plist - skipping!
20. Volume '', GUID = 2F69768E-8F45-4029-AD86-872FDA580F01 - no nvram.plist - skipping!
21. Volume 'TM', GUID = 52CB117E-C745-482B-98EC-8C526784423D - no nvram.plist - skipping!
22. Volume 'EFI', GUID = 9E7319EC-7716-4551-A18F-EDC1328D01A2 - no nvram.plist - skipping!
24. Volume 'Boot OS X', GUID = C3B89DCF-AAEC-4209-8B30-DB828E9A30DD Modified = 2012-10-26 22:57:3 (3628882623000 ms) - older - skipping!
Loading nvram.plist from Vol 'MLion' - loaded, size=320
PutNvramPlistToRtVars ...
Adding Key: fmm-computer-name: Data: Size = 16: Success
Adding Key: LocationServicesEnabled: Data: Size = 1: Success
get anime for os=23
Icon 14 not found at
get anime for os=38
get anime for os=23
get anime for os=23
get anime for os=23
get anime for os=38
get anime for os=23
get anime for os=37
get anime for os=38
get anime for os=38
get anime for os=23
hide volume 0
hide volume 3
hide volume 6
hide volume 8
added legacy entry 10 OSType=3 Name=Legacy HD2 Icon=legacy
added legacy entry 23 OSType=0 Name=Legacy HD2 Icon=<null string>
[1:513 - 1:108] ScanLegacy()
FindBootOptionForFile: 1F404098, \EFI\BOOT\CLOVERX64.EFI
BootOrder: 8: Boot0000, Boot0001, Boot0002, Boot0003, Boot0004, Boot0005, Boot0006, Boot0007
Searching for: PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(1,GPT,C7479120-EF6F-4FB0-80B1-40FBFB7462E5,0x28,0x64000)/\EFI\BOOT\CLOVERX64.EFI (Len: 126)
and for: HD(1,GPT,C7479120-EF6F-4FB0-80B1-40FBFB7462E5,0x28,0x64000)/\EFI\BOOT\CLOVERX64.EFI (Len: 98)
FindBootOptionForFile: Not found.
compression method 8 and CINFO=7 FDICT=0
found tools\Shell64.efi
[1:540 - 0:026] ScanTool()
compression method 8 and CINFO=7 FDICT=0
compression method 8 and CINFO=7 FDICT=0
compression method 8 and CINFO=7 FDICT=0
compression method 8 and CINFO=7 FDICT=0
[1:543 - 0:003] FinishTextScreen()
FindDefaultEntry ...
FindStartupDiskVolume ...
GetEfiBootDeviceFromNvram: efi-boot-device-data not found
not found
Default boot entry not found
[1:543 - 0:000] FindDefaultEntry()
File=logo.png loaded with status=Success length=11008
extension = png
compression method 8 and CINFO=7 FDICT=0
File=Selection_small.png loaded with status=Success length=1594
extension = png
compression method 8 and CINFO=7 FDICT=0
File=Selection_big.png loaded with status=Success length=2276
extension = png
compression method 8 and CINFO=7 FDICT=0
Found Mouse device:
- ResolutionX=65536
- ResolutionY=65536
- ResolutionZ=65536
- Left button present
- Right button present
compression method 8 and CINFO=7 FDICT=0
compression method 8 and CINFO=7 FDICT=0
Found BIOS RSDP at F0490
Saving ACPI tables from RSDP F0490 to EFI\ACPI\origin ...
F0490: 'RSD PTR ', Rev: 2 (Acpi 2.0 or newer), Len: 36 -> RSDP.aml
(Xsdt: C82D6078, Rsdt: C82D6028)
C82D6078: 'XSDT', 'A M I', Rev: 1, Len: 108 -> XSDT.aml
C82D6028: 'RSDT', 'A M I', Rev: 1, Len: 72 -> RSDT.aml
Tables in Xsdt: 9
0. C82E16C0: 'FACP', 'A M I', Rev: 4, Len: 244 -> FACP.aml
 (Dsdt: C82D6178, Facs: C82F1F80, XDsdt: C82D6178, XFacs: 0)
 C82D6178: 'DSDT', 'A M I', Rev: 2, Len: 46406 -> DSDT.aml
 C82F1F80: 'FACS', Ver: 2, Len: 64 -> FACS.aml
1. C82E17B8: 'APIC', 'A M I', Rev: 3, Len: 146 -> APIC.aml
2. C82E1850: 'MCFG', 'A M I', Rev: 1, Len: 60 -> MCFG.aml
3. C82E1890: 'SSDT', 'AoacTabl', Rev: 1, Len: 1167 -> SSDT.aml
4. C82E1D20: 'HPET', 'A M I', Rev: 1, Len: 56 -> HPET.aml
5. C82E1D58: 'SSDT', 'SataTabl', Rev: 1, Len: 877 -> SSDT-0.aml
6. C82E20C8: 'SSDT', 'Cpu0Ist', Rev: 1, Len: 2474 -> SSDT-1.aml
7. C82E2A78: 'SSDT', 'CpuPm', Rev: 1, Len: 2706 -> SSDT-2.aml
8. C82E3510: 'MATS', 'A M I', Rev: 2, Len: 52 -> MATS.aml
Tables in Rsdt: 9
0. C82E16C0: 'FACP', 'A M I', Rev: 4, Len: 244
 (Dsdt: C82D6178, Facs: C82F1F80, XDsdt: C82D6178, XFacs: 0)
 C82D6178: 'DSDT', 'A M I', Rev: 2, Len: 46406
 C82F1F80: 'FACS', Ver: 2, Len: 64
1. C82E17B8: 'APIC', 'A M I', Rev: 3, Len: 146
2. C82E1850: 'MCFG', 'A M I', Rev: 1, Len: 60
3. C82E1890: 'SSDT', 'AoacTabl', Rev: 1, Len: 1167
4. C82E1D20: 'HPET', 'A M I', Rev: 1, Len: 56
5. C82E1D58: 'SSDT', 'SataTabl', Rev: 1, Len: 877
6. C82E20C8: 'SSDT', 'Cpu0Ist', Rev: 1, Len: 2474
7. C82E2A78: 'SSDT', 'CpuPm', Rev: 1, Len: 2706
8. C82E3510: 'MATS', 'A M I', Rev: 2, Len: 52
Found UEFI Acpi 2.0 RSDP at 1FF6A014
Printing ACPI tables from RSDP 1FF6A014 ...
1FF6A014: 'RSD PTR ', Rev: 2 (Acpi 2.0 or newer), Len: 36
(Xsdt: 1FF6A120, Rsdt: 1FF6A0AC)
1FF6A120: 'XSDT', 'A M I', Rev: 1, Len: 172
1FF6A0AC: 'RSDT', 'A M I', Rev: 1, Len: 72
Tables in Xsdt: 17
0. 1FF69000: 'FACP', 'A M I', Rev: 4, Len: 244
 (Dsdt: 1FF55000, Facs: 1FEE8000, XDsdt: 1FF55000, XFacs: 1FEE8000)
 1FF55000: 'DSDT', 'A M I', Rev: 2, Len: 46406
 1FEE8000: 'FACS', Ver: 2, Len: 64
1. 1FF68000: 'APIC', 'A M I', Rev: 3, Len: 146
2. 1FF67000: 'MCFG', 'A M I', Rev: 1, Len: 60
3. 1FF66000: 'SSDT', 'AoacTabl', Rev: 1, Len: 1167
4. 1FF65000: 'HPET', 'A M I', Rev: 1, Len: 56
5. 1FF64000: 'SSDT', 'SataTabl', Rev: 1, Len: 877
6. 1FF63000: 'SSDT', 'Cpu0Ist', Rev: 1, Len: 2474
7. 1FF62000: 'SSDT', 'CpuPm', Rev: 1, Len: 2706
8. 1FF61000: 'MATS', 'A M I', Rev: 2, Len: 52
9. = 0
10. = 0
11. = 0
12. = 0
13. = 0
14. = 0
15. = 0
16. = 0
Tables in Rsdt: 9
0. 1FF69000: 'FACP', 'A M I', Rev: 4, Len: 244
 (Dsdt: 1FF55000, Facs: 1FEE8000, XDsdt: 1FF55000, XFacs: 1FEE8000)
 1FF55000: 'DSDT', 'A M I', Rev: 2, Len: 46406
 1FEE8000: 'FACS', Ver: 2, Len: 64
1. 1FF68000: 'APIC', 'A M I', Rev: 3, Len: 146
2. 1FF67000: 'MCFG', 'A M I', Rev: 1, Len: 60
3. 1FF66000: 'SSDT', 'AoacTabl', Rev: 1, Len: 1167
4. 1FF65000: 'HPET', 'A M I', Rev: 1, Len: 56
5. 1FF64000: 'SSDT', 'SataTabl', Rev: 1, Len: 877
6. 1FF63000: 'SSDT', 'Cpu0Ist', Rev: 1, Len: 2474
7. 1FF62000: 'SSDT', 'CpuPm', Rev: 1, Len: 2706
8. 1FF61000: 'MATS', 'A M I', Rev: 2, Len: 52
Found UEFI Acpi 1.0 RSDP at 1FF6A000
Printing ACPI tables from RSDP 1FF6A000 ...
1FF6A000: 'RSD PTR ', Rev: 0 (Acpi 1.0), Len: 20
(Rsdt: 1FF6A038)
1FF6A038: 'RSDT', 'A M I', Rev: 1, Len: 72
Tables in Rsdt: 9
0. 1FF69000: 'FACP', 'A M I', Rev: 4, Len: 244
 (Dsdt: 1FF55000, Facs: 1FEE8000, XDsdt: 1FF55000, XFacs: 1FEE8000)
 1FF55000: 'DSDT', 'A M I', Rev: 2, Len: 46406
 1FEE8000: 'FACS', Ver: 2, Len: 64
1. 1FF68000: 'APIC', 'A M I', Rev: 3, Len: 146
2. 1FF67000: 'MCFG', 'A M I', Rev: 1, Len: 60
3. 1FF66000: 'SSDT', 'AoacTabl', Rev: 1, Len: 1167
4. 1FF65000: 'HPET', 'A M I', Rev: 1, Len: 56
5. 1FF64000: 'SSDT', 'SataTabl', Rev: 1, Len: 877
6. 1FF63000: 'SSDT', 'Cpu0Ist', Rev: 1, Len: 2474
7. 1FF62000: 'SSDT', 'CpuPm', Rev: 1, Len: 2706
8. 1FF61000: 'MATS', 'A M I', Rev: 2, Len: 52
DSDT saved to EFI\ACPI\origin\DSDT-0.aml
ConnectAll after refresh menu
reinit: self device path=PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)/HD(1,MBR,0x00000000,0x2,0x7A601E)
new SelfHandle=1F4B3718
found 25 volumes with blockIO
* PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)
USB volume
USB volume
this is SelfVolume at index 1
* PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)/HD(1,MBR,0x00000000,0x2,0x7A601E)
USB volume
USB volume
* PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x3,0x0)/USB(0x0,0x0)/USB(0x0,0x0)
USB volume
USB volume
USB volume
USB volume
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x5,0x0,0x0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(1,GPT,1399EABD-3B8F-4116-A22D-7B7FC3BD171A,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(2,GPT,528BCB5E-39A6-4789-9114-2AAE2F50B810,0x64028,0x1BE80460)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(3,GPT,C5D78866-DD70-4F70-83E9-12FB06E9896C,0x1BEE4488,0x40000)
Booting OS 10.8.2
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0,0x0)/HD(1,GPT,7831BD74-24D7-44B1-BFB8-7233E0EBEDF0,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0,0x0)/HD(2,GPT,275A3C0A-2C01-4F7D-A31E-589612CD10DD,0x64028,0x74662D60)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0x0,0x0)/HD(1,GPT,33815E30-02B7-4461-BFE5-6A3FF45FCA8F,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0x0,0x0)/HD(2,GPT,4C36FA93-024F-4C27-AE2A-ACE92B903554,0x64028,0x3A2E1FE0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(1,GPT,C7479120-EF6F-4FB0-80B1-40FBFB7462E5,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(2,GPT,58650676-71D4-4C5A-A6A2-09006448A1CA,0x64028,0x1D170FF0)
Booting OS 10.8.2
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(3,GPT,927F2BEB-5966-40AC-B1D5-C5FD3E673EAC,0x1D215018,0x1A4CF600)
Booting OS 10.7.5
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(4,GPT,85E4EDEC-44AC-453F-977D-8577BB0587B0,0x37724618,0x2C219F0)
Booting OS 10.8
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(1,GPT,2F69768E-8F45-4029-AD86-872FDA580F01,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x4,0x0,0x0)/HD(2,GPT,52CB117E-C745-482B-98EC-8C526784423D,0x64028,0x3A2E1FE0)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x5,0x0,0x0)/HD(1,GPT,9E7319EC-7716-4551-A18F-EDC1328D01A2,0x28,0x64000)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x5,0x0,0x0)/HD(2,GPT,4DF03E8D-C58F-46BC-B45D-D6FF6E24013B,0x64028,0x1BE80460)
* PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x5,0x0,0x0)/HD(3,GPT,C3B89DCF-AAEC-4209-8B30-DB828E9A30DD,0x1BEE4488,0x40000)
Booting OS 10.8.2
PutNvramPlistToRtVars ...
Adding Key: fmm-computer-name: Data: Size = 16: Success
Adding Key: LocationServicesEnabled: Data: Size = 1: Success
get anime for os=23
get anime for os=38
get anime for os=23
get anime for os=23
get anime for os=23
get anime for os=38
get anime for os=23
get anime for os=37
get anime for os=38
get anime for os=38
get anime for os=23
hide volume 0
hide volume 3
hide volume 6
hide volume 8
added legacy entry 10 OSType=3 Name=Legacy HD2 Icon=legacy
added legacy entry 23 OSType=0 Name=Legacy HD2 Icon=<null string>
[70:146 - 68:602] ScanLegacy()
FindBootOptionForFile: 1F404098, \EFI\BOOT\CLOVERX64.EFI
BootOrder: 8: Boot0000, Boot0001, Boot0002, Boot0003, Boot0004, Boot0005, Boot0006, Boot0007
Searching for: PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x3,0x0,0x0)/HD(1,GPT,C7479120-EF6F-4FB0-80B1-40FBFB7462E5,0x28,0x64000)/\EFI\BOOT\CLOVERX64.EFI (Len: 126)
and for: HD(1,GPT,C7479120-EF6F-4FB0-80B1-40FBFB7462E5,0x28,0x64000)/\EFI\BOOT\CLOVERX64.EFI (Len: 98)
FindBootOptionForFile: Not found.
found tools\Shell64.efi
[70:146 - 0:000] ScanTool()
[70:146 - 0:000] FinishTextScreen()
FindDefaultEntry ...
FindStartupDiskVolume ...
GetEfiBootDeviceFromNvram: efi-boot-device-data not found
not found
Default boot entry not found
[70:146 - 0:000] FindDefaultEntry()

Link to comment
Share on other sites
airlync
airlync
Posted
Posted

This looks like the problem that miaumiau and TimeWalker had on their laptops with Phoenix UEFI. You can find more about this here.

 

add the EmuVariableRuntimeDxe.efi to /EFI/drivers64UEFI/ , problem has been resolved, Thank You!

Link to comment
Share on other sites
Taruga
Taruga
Posted
Posted

Apple software raid boots fine here with clover. (from external usb stick)

 

I'm glad to know it works with raid volumes

 

But I can't get it to work... can't you post your Clover config.plist , maybe it will help me

 

Thanks

 

ps. What clover build are you using ?

Link to comment
Share on other sites
gothic860
gothic860
Posted
Posted

Hi there,

 

thank you for the great work. I have 1 little problem. I Installed Clover on the EFI Partition, but it doesnt show the "Macintosh HD" (Mountain Lion), only "Boot UEFI boot menu from" and "Boot Legacy from Legacy HD2". Any ideas? Did i made something wrong?

Link to comment
Share on other sites
Mrengles
Mrengles
Posted
Posted (edited)

Hey Clover users!

 

I know this is only my first post, Sorry for making it a question. The reason I signed up for this forum was simply to follow this thread. I've got clover working on GPT/EFI booted from BIOS at the moment and its GREAT! In the past i'v using the moron prof tools at tonymacx86 such as unibeat to create my Install USB. The problem with this method does not create the recovery partition during install of OS X. I've read over the instruction in /EFU/doc to install OS X to GPT, the problem i'm having (don't know if its me being a moron, or the guide leave allot to be assumed) but I can't figure it out, it's just not making sense to me.

 

Will someone explain or provide a link to a guide/install method that will create the recovery partition on a hackintosh? I've managed to get one working by reinstalling 10.8.2 from the application folder, restarting back to my OSX drive, remove /OS X install's kernelcache, and then finishing the install by restarting back into Install OS X from Macintosh SSD. It works but take a long time with allot of steps.

 

I would like to have a copy of the installer on hand saved onto a USB, that I can just simple install 10.8, that creates the recovery partition, setup OS X and be done.

 

Again, will someone explain or provide a link to a guide/install method that will create the recovery partition on a hackintosh?

 

Thanks in advanced,

 

-Mrengles

 

Hardware: I know its not needed for this request. =)

 

ASUS P8Z77-M Pro (Patched 1616 BIOS), 16GB RAM, 3770K, GTX 670, Full custom water loop.

 

P.S I have some more questions about clover, but figured I would try to fix/config on my own with some more research before I bug everyone with info that has already been posted.

 

Thanks again!

Edited by mrengles
Link to comment
Share on other sites
magnifico
magnifico
Posted
Posted

Hey Clover users!

 

I know this is only my first post, Sorry for making it a question. The reason I signed up for this forum was simply to follow this thread. I've got clover working on GPT/EFI booted from BIOS at the moment and its GREAT! In the past i'v using the moron prof tools at tonymacx86 such as unibeat to create my Install USB. The problem with this method does not create the recovery partition during install of OS X. I've read over the instruction in /EFU/doc to install OS X to GPT, the problem i'm having (don't know if its me being a moron, or the guide leave allot to be assumed) but I can't figure it out, it's just not making sense to me.

 

 

 

This forum is not allowed to talk about tony's and his beasts :wink2:

Link to comment
Share on other sites
dmazar
dmazar
Posted
Posted

I Installed Clover on the EFI Partition, but it doesnt show the "Macintosh HD" (Mountain Lion), only "Boot UEFI boot menu from" and "Boot Legacy from Legacy HD2". Any ideas? Did i made something wrong?

It looks like you are booting it in UEFI mode, but did not put HFSPlus.efi driver into /efi/drivers64UEFI. The best thing to do is to start Clover and then press F2 to save /efi/misc/preboot.log to EFI partition. If you post that file here, it will be possible to say what went wrong.

 

I would like to have a copy of the installer on hand saved onto a USB, that I can just simple install 10.8, that creates the recovery partition, setup OS X and be done.

In my case it is enough to restore Applications/Install OS X Mountain Lion.app/Contents/SharedSupport/InstallESD.dmg to USB stick and then I can boot installer from it by Clover without any additional tweaks. This install then creates recovery partition, although I prefer having another full OSX install on another partition (even another disk) from where I can do recovery if needed.

 

By the way, starting Applications/Install OS X Mountain Lion.app and then restarting with Clover into installer is also possible here. No need to move disk to real Mac.

Link to comment
Share on other sites
Mrengles
Mrengles
Posted
Posted

Thanks everyone! I'll be sure not to talk about Tony and his Beasts, haha!

 

@

dmazar

When restoring and booting the InstallESD.dmg. I have added FakeSMC.kext to EFI/kexts/10.8 and booting with extra kexts and no kernelcache, However when the USB boots and starts I get an error "waiting 10 seconds..." And never able to complete the boot process.

 

Am I missing anything? Should I post a screen shot, or log? Also do you install/setup clover to the Installer USB's GPT/EFI partition or use another disk completely to boot/load up Clover?

 

Thanks again!

 

-Mrengles

Link to comment
Share on other sites
Mrengles
Mrengles
Posted
Posted

Well, I've got a working OS X Mountain Lion Installer USB that creates a working Recovery HD partition during the installation process. The steps were very simple, took about 5-10 minutes to modify the installer (depending on the speed of your Mac). Its was combination of a standard retail InstallESD.dmg restore, with parts of Blackosx's Recovery Partition guide.

 

Thanks again everyone, for your comments, jokes, advise, and other 2cent posts!

 

Man, Clover v2 r806 Bootloader is AWESOME!

 

I was so excited that Find My Mac was working... I just had to send a lock request from iCloud to complete my tests. A few seconds later my Hackintosh, shutdown, restarted, and booted backup to the Lock screen! it WORKED!!! Haha

 

Entered my 6 digit passkey a few times, none of them worked, and I was locked out of my freshly Installed Hackintosh. Long story short Find My Mac, works but doesn't. Be careful. =)

 

Thanks SLICE for a great Mac experience on a PC. Best bootloader i've used to date, with only a few small kinks, it really is the most Mac like.

 

-Mrengles

  • Like 1
Link to comment
Share on other sites
Slice
Slice
Posted
Posted

This is my preboot.log file. My configuration is EFI, ML, Windows partition on GPT hard drive. Could you help me to get Clover boot without messing up my partitions?

You are attempting to do UEFI boot

Starting rEFIt rev 806 on HPQ EFI

But this EFI is not known for us. We know Aptio, Phoenix, Tiano, InsideO2 but not HPQ.

You may try to exclude extra EFI-modules, may be this helps.

[0:000 - 0:000] LoadDrivers() start
Starting DataHubDxe-64.efi
Using load options 'DataHubDxe-64.efi  '
Starting FSInject-64.efi
Using load options 'FSInject-64.efi  '
Starting OsxAptioFixDrv-64.efi
Using load options 'OsxAptioFixDrv-64.efi  '
Starting OsxFatBinaryDrv-64.efi
Using load options 'OsxFatBinaryDrv-64.efi  '
Starting OsxLowMemFixDrv-64.efi
Using load options 'OsxLowMemFixDrv-64.efi  '
Starting PartitionDxe-64.efi
Using load options 'PartitionDxe-64.efi  '
Starting HFSPlus-64.efi
Using load options 'HFSPlus-64.efi  '
Starting NTFS-64.efi
Using load options 'NTFS-64.efi  '
Starting VBoxExt2-64.efi
Using load options 'VBoxExt2-64.efi  '
[0:079 - 0:079] LoadDrivers() end

Obligatory are OsxFatBinaryDrv-64.efi, HFSPlus-64.efi. Others optional.

 

Else use BIOS boot mode through CloverEFI.

 

@Slice

Could you add os_vista.icns and vol_internal_ntfs.icns to the theme "buttons" in the installer?

It's inconvenient to add these items myself everytime after a new installation... Thanks!! :P

OK

Link to comment
Share on other sites
Mrengles
Mrengles
Posted
Posted

@ Slice

 

Does it matter, if the config.plist uses Boolean as opposed to String for some Values?

 

For Example:

 

 

 

<key>InjectSystemID</key>
<true/>

 

 

<key>InjectSystemID</key>
<string>Yes</string>

 

 

Would either of these work? What are your thoughts.

 

Thanks

 

-Mrengles

Link to comment
Share on other sites
dmazar
dmazar
Posted
Posted

When restoring and booting the InstallESD.dmg. I have added FakeSMC.kext to EFI/kexts/10.8 and booting with extra kexts and no kernelcache, However when the USB boots and starts I get an error "waiting 10 seconds..." And never able to complete the boot process.

 

Am I missing anything? Should I post a screen shot, or log? Also do you install/setup clover to the Installer USB's GPT/EFI partition or use another disk completely to boot/load up Clover?

Some notes: FakeSMC is not needed for ML install. You can boot installer without it, just normal boot.

 

But for Lion install in that way, FakeSMC is needed. But you still do not need to choose "booting with kexts and no kernelcache" since Clover can inject EFI/kexts/ into kernelcache directly (thanks to FrodoKenny).

 

About "waiting 10 seconds..." - are you doing UEFI boot? Is this message from AptioFix driver? Did you resolved that issue?

 

About guides - as far as I am concerned, any guide is welcome. Spread the experience. I do not have time and will to do detailed guides - I'm hoping others will do it.

Link to comment
Share on other sites
dmazar
dmazar
Posted
Posted

This is my preboot.log file. My configuration is EFI, ML, Windows partition on GPT hard drive. Could you help me to get Clover boot without messing up my partitions?

As Slice said, nobody reported success with HP laptop so far. It seems that Clover does not see OSX partition even if you have HFSPlus.efi driver, right? If yes, please try with VBoxHfs.efi from here (remove HFSPlus.efi).

 

I'll repost some info regarding UEFI boot from there:

 

When trying UEFI boot, try with following combination of drivers in /EFI/Drivers64UEFI folder:

1. HFSPlus.efi, OsxFatBinaryDrv-64.efi

if this does not work, then

 

2. HFSPlus.efi, OsxFatBinaryDrv-64.efi, OsxLowMemFixDrv-64.efi

and then if this does not work then

 

3. HFSPlus.efi, OsxFatBinaryDrv-64.efi, OsxAptioFixDrv-64.efi (with slide=0 in boot args in config.plist)

and if even this does not work, then try:

 

4. HFSPlus.efi, OsxFatBinaryDrv-64.efi, OsxAptioFixDrv-64.efi (with slide=0 in boot args in config.plist), EmuVariableRuntimeDxe.efi (from here)

 

More about it:

 

1. HFSPlus.efi, OsxFatBinaryDrv-64.efi

This works on boards with Gigabyte Hybrid EFI. This is the best option for UEFI boot, in the sense that no special fixes are required. Any OSX should boot fine, unless some big change happens that will stop working boot here.

 

2. HFSPlus.efi, OsxFatBinaryDrv-64.efi, OsxLowMemFixDrv-64.efi

This works on Insyde H2O UEFI. Some small memory issue will be fixed by LowMemFix, and then everything should be equal to case 1.

 

3. HFSPlus.efi, OsxFatBinaryDrv-64.efi, OsxAptioFixDrv-64.efi (with slide=0 for ML)

This works for all other boards ... well, where works. This is not so good solution because it depends on current functioning of boot.efi and current structures that are passed between boot.efi (boot loader) and kernel, like boot args and device tree. Meaning: if structure of boot args changes, like it changed when Lion came out, which caused Chameleon to fail to boot Lion, this will again break Chameleon and UEFI boot with AptioFix - until somebody fixes it. This is the most annoying thing to me because the major point for having UEFI boot is to use boot.efi as bootloader and to avoid such things. Well, if this happens, the first solution will be to fall back to standard Clover until the thing is resolved. The small issue is that standard Clover is also dependent on kernel boot args when kernel and kext patching or kext injection is used - this would also need to be turned off in that case.

 

4. HFSPlus.efi, OsxFatBinaryDrv-64.efi, OsxAptioFixDrv-64.efi, EmuVariableRuntimeDxe.efi

This works on Dell Vostro, some ThinkPad's - some laptops with Phoenix UEFI. All mentioned in 3. is applicable here.

 

All other drivers may or may not be needed. Drivers listed above are required minimum. The best way to test if the driver is needed or not is to try without it - if the thing still works, then it is not needed. Well, more or less ... since for example normal boot works without FSInject, but that one can be needed sometimes.

  • Like 4
Link to comment
Share on other sites
Slice
Slice
Posted
Posted

:hammer:

@Slice ..please I solved the problem with your theme, but I have a 1920 x 1200 monitor and I noticed that the resolution of your topic isn't suitable for 1920 x 1200, how should I fix?

 

 

and the mouse pointer does not move in the GUI, why?

Hi magnifico,

you should rescale background image to for your screen (by Preview.app) , but sorry, you can't change your screen resolution. It is EFI driver limitation.

Mouse pointer may not move if you forget to place MouseDxe in /EFI/drivers64/

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...