pablos93 Posted November 29, 2012 Share Posted November 29, 2012 Try to use the framebuffer manually with "AtiConfig=xxx" (change the xxx by the differents framebuffer ) in an another time, you can send me a graphique BIOS dump and the result of your test with aticonfig. Thank you very much! I'll try later when I get home Link to comment Share on other sites More sharing options...
tle88 Posted November 29, 2012 Share Posted November 29, 2012 Lack of restore partition here too, otherwise works well. Not even new AppleHDA crash with the AD1988B 7.1.kext which is actually tuned VoodooHDA 2.7.2 Link to comment Share on other sites More sharing options...
tdtran1025 Posted November 29, 2012 Share Posted November 29, 2012 Older NVidia cards work much better than old ATI (5000 series). I have a bunch of older NVidia cards but only 1 HD5450. The ATI5450 is not running well. Link to comment Share on other sites More sharing options...
UNOE Posted November 30, 2012 Share Posted November 30, 2012 I have a System here with 3 7970's working with 10.8.2. I'm using GraphicsEnabler=No and booting just fine. I'm trying to figure out what I should do next should I just try the update or Should I extract the kext and try to run the 7970 new kext with 10.8.2 ? Link to comment Share on other sites More sharing options...
sea_man Posted December 2, 2012 Share Posted December 2, 2012 I'm trying the 10.8.3 whit my 7970 but i'm stuck at this same screen whit the lasted chimera or chameleon ... Someone is having more luck whit the 7970 ? Link to comment Share on other sites More sharing options...
gothic860 Posted December 3, 2012 Share Posted December 3, 2012 Any news for the 6xxM (Mobile Kepler) cards? Link to comment Share on other sites More sharing options...
slayer2333 Posted December 3, 2012 Share Posted December 3, 2012 Installed the beta on Asus g53jw-A1 with Nvidia 460m GTX. The only difference was from the Graphics side which works without patching, and no blue screen issues when waking from sleep or plugging additional screens, but lost about 30 point in Benchmark (Cinebench). There is a new AppleHDA included that i replaced with my working 10.8.2 one once the install complete. Link to comment Share on other sites More sharing options...
beta992 Posted December 4, 2012 Share Posted December 4, 2012 Any (official) final release date? Link to comment Share on other sites More sharing options...
fantomas Posted December 4, 2012 Author Share Posted December 4, 2012 maybe it's a little early to tell it, the first beta has just come out, but with Apple we never know ! Link to comment Share on other sites More sharing options...
beta992 Posted December 4, 2012 Share Posted December 4, 2012 OK, I'm waiting for the final version so that all 'bugs' are solved. Link to comment Share on other sites More sharing options...
sea_man Posted December 4, 2012 Share Posted December 4, 2012 My 7970 is fully working now ..!!! All thanks to the help of Rampage Dev ! http://rampagedev.wordpress.com/2012/12/04/about-amd-7970-working-with-full-qe/ 1 Link to comment Share on other sites More sharing options...
gils83 Posted December 4, 2012 Share Posted December 4, 2012 My 7970 is fully working now ..!!! All thanks to the help of Rampage Dev ! http://rampagedev.wo...g-with-full-qe/ hello, what did you use chameleon to start? Thank you. Link to comment Share on other sites More sharing options...
ErmaC Posted December 5, 2012 Share Posted December 5, 2012 I collect this topic info (THX fantomas1) and put into the Chameleon code. Give it a try for AMD/ATI 7xxx (supposed)supported card. GraphicsEnabler = Yes EnableHDMIAudio = Yes PKG REMOVED Binaries REMOVED The base FB is set to Aji but you can change it and chose between: Aji Buri Chutoro Dashimaki Ebi Gari Futomaki Hamachi OPM Ikura IkuraS Fabio 5 Link to comment Share on other sites More sharing options...
mitch_de Posted December 5, 2012 Share Posted December 5, 2012 My 7970 is fully working now ..!!! All thanks to the help of Rampage Dev ! http://rampagedev.wo...g-with-full-qe/ Great! I think you can break easy the 1024K Gigaflops of OpenCL Galaxies Bench or get great Furmark OpenGL results with that card. http://www.insanelymac.com/forum/topic/284472-furmark-geek3d-opengl-benchmark-ported-to-os-x/ http://www.insanelymac.com/forum/topic/276190-opencl-benchmark-galaxies-works-107-108/ 1 Link to comment Share on other sites More sharing options...
sea_man Posted December 5, 2012 Share Posted December 5, 2012 Great! I think you can break easy the 1024K Gigaflops of OpenCL Galaxies Bench or get great Furmark OpenGL results with that card. http://www.insanelym...ported-to-os-x/ http://www.insanelym...-works-107-108/ Bench ready in the respective forums ! Also i left the SS here. Link to comment Share on other sites More sharing options...
fantomas Posted December 6, 2012 Author Share Posted December 6, 2012 Hi guys ! A new build has been seeded by Apple to developers. It's the build 12D38 ! Link to comment Share on other sites More sharing options...
UNOE Posted December 6, 2012 Share Posted December 6, 2012 I collect this topic info (THX fantomas1) and put into the Chameleon code. Give it a try for AMD/ATI 7xxx (supposed)supported card. GraphicsEnabler = Yes EnableHDMIAudio = Yes PKG Binaries The base FB is set to Aji but you can change it and chose between: Aji Buri Chutoro Dashimaki Ebi Gari Futomaki Hamachi OPM Ikura IkuraS Fabio Thanks for this. But with Graphics enabler Yes I get a memory allocation error and halt before any kext load. Link to comment Share on other sites More sharing options...
Wayang-NT Posted December 6, 2012 Share Posted December 6, 2012 build 12D38 Link to comment Share on other sites More sharing options...
UNOE Posted December 6, 2012 Share Posted December 6, 2012 Sweet worked, I had to have Monitor pugged into last GPU. Edit : update so it really isn't the third GPU. Unplugging and plugging monitor back in is helping, thats why I was confused. So currently this is what I have to do to boot. I have two cords from my monitor plugged in. GPU1 DVI port, GPU2 DisplayPort, and GPU2 also needs a Dummy Plug (http://www.geeks3d.com/20091230/vga-hack-how-to-make-a-vga-dummy-plug/). This boots first to a white screen on the DVI port on GPU1. Then I change the Display source to DisplayPort and it works. Before without the dummy plug when I changed the source it would go to a screen with just desktop background with cursor and full resolution. I'm pretty sure this can be fixed without a dummy plug into the DVI. Link to comment Share on other sites More sharing options...
P1X3 Posted December 7, 2012 Share Posted December 7, 2012 I am still getting white screen (with mouse if I replug monitor) after Installing 10.8 then 10.8.3 Dev Update (or ATI7000 kext). I have also injected DSDT (here) and booting with ATIConfig=Aji (XFX 7970, DVI, HDMI, DP, DP) Am I missing something? Link to comment Share on other sites More sharing options...
Rampage Dev Posted December 7, 2012 Share Posted December 7, 2012 I am still getting white screen (with mouse if I replug monitor) after Installing 10.8 then 10.8.3 Dev Update (or ATI7000 kext). I have also injected DSDT (here) and booting with ATIConfig=Aji (XFX 7970, DVI, HDMI, DP, DP) Am I missing something? One user reported when he removed the SMbus edit it started working. Not sure why... Link to comment Share on other sites More sharing options...
P1X3 Posted December 7, 2012 Share Posted December 7, 2012 Well from a different forum I learned that if I put computer to sleep and wake it up (when white screen shows up) the graphics card starts up. If I recall correctly sometime back a different card had similar thing going on with sleep&awake to get it started. Also what happened to all the animations? I am not getting any hover effects showing up nor dock magnification. Link to comment Share on other sites More sharing options...
Rampage Dev Posted December 7, 2012 Share Posted December 7, 2012 Well from a different forum I learned that if I put computer to sleep and wake it up (when white screen shows up) the graphics card starts up. If I recall correctly sometime back a different card had similar thing going on with sleep&awake to get it started. Also what happened to all the animations? I am not getting any hover effects showing up nor dock magnification. Post a IOreg so I can make sure the Framebuffer is loaded. Also I just updated the entire post to gather my thoughts and the information that I had gathered: http://rampagedev.wordpress.com/2012/12/04/about-amd-7970-working-with-full-qe/ Link to comment Share on other sites More sharing options...
fantomas Posted December 7, 2012 Author Share Posted December 7, 2012 guys, maybe it's normal, the drivers aren't yet finalized, Apple said (from seed note) there still 4 known bugs! after maybe this have not affect hackintosh! 1 Link to comment Share on other sites More sharing options...
P1X3 Posted December 7, 2012 Share Posted December 7, 2012 Post a IOreg so I can make sure the Framebuffer is loaded. Also I just updated the entire post to gather my thoughts and the information that I had gathered: http://rampagedev.wo...g-with-full-qe/ Here is ioreg http://www.mediafire.com/?57mx35k16snn754 Also I did a fresh install of 10.8 Then applied 10.8.3 and using certain tool (not sure if I can name it here), finished the setup with DSDT-Free Option, GraphicsEnabler=No, iMac12.2, plus other motherboard specific stuff. Ofcourse I set AtiCOnfig=Aji using CW. Boots perfectly until white screen(s). Send it to sleep - wake up - and I am at desktop. Two screens, full resolution, luxmark reports 1762 (7970 @stock) Link to comment Share on other sites More sharing options...
Recommended Posts