AlpineRaven Posted November 11, 2012 Share Posted November 11, 2012 G'day guys, Hope you can direct me to right direction - I am after a new nVidia card with HDMI and audio so i can connect to the TV as I want to use my hackintosh to play movies on main TV (as like HTPC setup) So.... is there a card that will be easy to setup including DSDT - I'm very poor in editing DSDT as I am not a programmer, even tried following it... Cheers AP Link to comment Share on other sites More sharing options...
eep357 Posted November 11, 2012 Share Posted November 11, 2012 lots of them, depends how much you want to spend and what else besides video you may want to use it for (which will also depend on the rest of your hardware specs) Link to comment Share on other sites More sharing options...
toleda Posted November 13, 2012 Share Posted November 13, 2012 G'day guys, Hope you can direct me to right direction - I am after a new nVidia card with HDMI and audio so i can connect to the TV as I want to use my hackintosh to play movies on main TV (as like HTPC setup) So.... is there a card that will be easy to setup including DSDT - I'm very poor in editing DSDT as I am not a programmer, even tried following it... Cheers AP Any of the Nvidia 6xx graphics cards are native in ML and work with GE=Y or N. Important note; all Nvidia 6xx with PCIe 3.0 are Kepler (recommended) while 6xx with PCIe 2.0 are rebranded Fermi. The HDMI audio dsdt edit is mandatory in OS X and is the same for all Nvidia graphics cards. In ML, onboard audio does not need to be working for HDMI audio to work. Pick the Nvidia 6xx that has the most performance for your budget. Link to comment Share on other sites More sharing options...
Rampage Dev Posted November 14, 2012 Share Posted November 14, 2012 In ML, onboard audio does not need to be working for HDMI audio to work. Not true. The AppleHDA from ML is dependent on onboard audio working. The AppleHDA from LIon is not dependent. Link to comment Share on other sites More sharing options...
toleda Posted November 14, 2012 Share Posted November 14, 2012 Not true. The AppleHDA from ML is dependent on onboard audio working. The AppleHDA from LIon is not dependent. I stand by the statement in my post. What dsdt/HDEF/layout-id are you using in ML? Link to comment Share on other sites More sharing options...
Rampage Dev Posted November 14, 2012 Share Posted November 14, 2012 I stand by the statement in my post. What dsdt/HDEF/layout-id are you using in ML? Its not true. Its a requierment in AppleHDA. Onboard must load. Tested on ALC883,885,887,889,892, 898, and VIA 2010 (I Think That is the right one). If AppleHDA is not loaded for Onboard HDMI audio will not work with the ML kext. What version of AppleHDA are you using. Link to comment Share on other sites More sharing options...
toleda Posted November 16, 2012 Share Posted November 16, 2012 Its not true. Its a requierment in AppleHDA. Onboard must load. Tested on ALC883,885,887,889,892, 898, and VIA 2010 (I Think That is the right one). If AppleHDA is not loaded for Onboard HDMI audio will not work with the ML kext. What version of AppleHDA are you using. The native AppleHDA.kext_v2.3.0 and AppleHDA.kext_v2.3.1 provide working HDMI audio (assuming, correct HDMI audio dsdt edits ) with the above codecs and ANY other codec in ML. AppleHDA.kext_v1.7.9 through AppleHDA.kext_v2.2.0 require working onboard audio for HDMI audio to work in SL and Lion. If you are not getting ML HDMI audio with either native ML AppleHDA.kext, reply with an IOReg. Link to comment Share on other sites More sharing options...
aikidoka25 Posted January 6, 2013 Share Posted January 6, 2013 (edited) My unit is a Gigabyte GA-EX58-UD5 with HD4870 card and Mountain Lion. I am thinking of getting an EVGA GTX 670 915MHz 2048MB (GTX 670 02G-P4-2670-KR). The motherboard has PCIe 2.0 while the card is PCIe 3.0, so is it compatible? UPDATE: I just read that PCIe 3.0 can fall back to PCIe 2.0 so I guess this part is OK. Also, with HD4870 I only need to use GraphicsEnabler=Yes. With the proposed card, do you guys think it is compatible out of the box? Thanks for any advise. Cheers! Edited January 6, 2013 by aikidoka25 Link to comment Share on other sites More sharing options...
TH3L4UGH1NGM4N Posted January 6, 2013 Share Posted January 6, 2013 If you're referring to the gtx 670 you posted then yes, it will be compatible out of the box (OOTB). Might need to a do an additional "work" to get openCL working on it if you so desire. Link to comment Share on other sites More sharing options...
jsl Posted February 16, 2013 Share Posted February 16, 2013 The native AppleHDA.kext_v2.3.0 and AppleHDA.kext_v2.3.1 provide working HDMI audio (assuming, correct HDMI audio dsdt edits ) with the above codecs and ANY other codec in ML. AppleHDA.kext_v1.7.9 through AppleHDA.kext_v2.2.0 require working onboard audio for HDMI audio to work in SL and Lion. If you are not getting ML HDMI audio with either native ML AppleHDA.kext, reply with an IOReg. Can you help me to enable HDMI audio of GTX 550Ti in 10.8.3 or 10.7.5 ? I have followed your advice to try several versions of AppleHDA.kext with proper patch for 550 Ti, but all in vain. My attached files (DSDT.aml & IORegistry Data) are posted at : http://www.insanelym...ga-965p-ds4-mb/ Link to comment Share on other sites More sharing options...
toleda Posted February 17, 2013 Share Posted February 17, 2013 Can you help me to enable HDMI audio of GTX 550Ti in 10.8.3 or 10.7.5 ? I have followed your advice to try several versions of AppleHDA.kext with proper patch for 550 Ti, but all in vain. The GTX 550 ti has a peculiar problem which makes it incompatible for HDMI audio with Lion and Mountain. Look at IOReg/PEGP/GFX0/NVDA,Display-B@01/audio-codec-index=4. The valid indexes are 0, 1, 2 and 3 as you can see attached to HDAU. No idea where the problem occurs or how to change it. There is a work around; use the Snow Leopard 10.6.2 AppleHDA.kext_v1.7.9. The was the first AppleHDA.kext to 1. support Nvidia HDMI audio codecs and 2. not validate Nvidia HDMI audio codecs. Search for Interim Realtek Ivy Bridge AppleHDA. With your current dsdt/HDEF/layout-id, you should have onboard 888 audio. For GTX 550 ti HDMI audio, edit AppleHDA binary: find: 14 00 de 10 replace: 15 00 de 10 (4x) Save, install and restart. Note: 1. works without onboard audio and 2. enables HDMI audio on GTS 450 and GTX 550 ti. Link to comment Share on other sites More sharing options...
jsl Posted February 17, 2013 Share Posted February 17, 2013 Thanks for your prompt reply. After re-use of that patched version (1.7.9) again miracle happened ! Both on board internal speaker (AL-888) and HDMI audio output are working now. Before that only added HDAEnabler.kext I can get ALC-888 working for its internal speaker. But still no luck for HDMI audio. I mean there is HDMI audio in System Information (About this Mac), but no HDMI audio in System Preferences. Thanks again for your intelligent and kind help which solved my problem eventually ! But IOResgistry still showed IOReg/PEGP/GFX0/NVDA,Display-B@01/audio-codec-index=4. In System Information/Audio(About this Mac) there is Built-In HDMI Output instead of previous HDMI audio. In System Preferences I can select both internal speaker and HDMI audio now. I don't know why. Link to comment Share on other sites More sharing options...
toleda Posted February 17, 2013 Share Posted February 17, 2013 But IOResgistry still showed IOReg/PEGP/GFX0/NVDA,Display-B@01/audio-codec-index=4. In System Preferences I can select both internal speaker and HDMI audio now. I don't know why. IOReg will always show IOReg/PEGP/GFX0/NVDA,Display-B@01/audio-codec-index=4, because the problem is not solved. The vintage AppleHDA.kext does not use that value; it always uses audio-codec-index=1. Isn't selectecting both internal speaker and HDMI audio good? Reply with a new copy of IOReg. Link to comment Share on other sites More sharing options...
jsl Posted February 18, 2013 Share Posted February 18, 2013 Thanks for your explanation. Attached is my new IOReg 965P-DS4-HDMI-audio.zip Link to comment Share on other sites More sharing options...
Recommended Posts