rongu Posted September 21, 2012 Share Posted September 21, 2012 After I disabled VT-d in BIOS it also works with the original 10.8.2. AppleACPIPlatform.kext. Using a Gigabyte GA-Z77X-UP5 TH with BIOS F9. Hi, I have "IOUSBFamily did not receive enough extra current for the SuperSpeed device (4-Port USB 3.0 Hub) at 0x14c00000, asked for 400mA but got 0 mA" error message from console. The USB port not charging iPad. Have to roll back to 10.8.1 IOUSBFamily.kext to fix the problem .. do u have to do that ? BTW, nice to see you here. Upon further use i noticed that GTX 670 drivers have only OpenGL 2.1 and lower. And Starcraft 2 crashes. hey i got mine running fine ... Link to comment Share on other sites More sharing options...
khe91 Posted September 21, 2012 Share Posted September 21, 2012 Hi, I have "IOUSBFamily did not receive enough extra current for the SuperSpeed device (4-Port USB 3.0 Hub) at 0x14c00000, asked for 400mA but got 0 mA" error message from console. The USB port not charging iPad. Have to roll back to 10.8.1 IOUSBFamily.kext to fix the problem .. do u have to do that ? I got the same messages, still the USB 3.0 ports are working for external hard disks. Didn't try if they can charge devices. Link to comment Share on other sites More sharing options...
Cavendish Qi Posted September 21, 2012 Share Posted September 21, 2012 if your computer wont boot or acpi state not working try this kext. Hi, unixservice, Thanks for your patched kext at first. Would you like to share more about how to modify it manually? Thanks a lot. 1 Link to comment Share on other sites More sharing options...
p.H Posted September 21, 2012 Share Posted September 21, 2012 Removed oemsmbios and repaired permissions etc. now got Voodoohda KP so going to delete that and see what happens voodoohda and applehda cannot stay together you have to remove one of them. Link to comment Share on other sites More sharing options...
Slice Posted September 21, 2012 Share Posted September 21, 2012 Updated through app store, no issues what so ever. +1 voodoohda and applehda cannot stay together you have to remove one of them. Just use AppleHDADisabler and don't bother about updates. Link to comment Share on other sites More sharing options...
p.H Posted September 21, 2012 Share Posted September 21, 2012 Just use AppleHDADisabler and don't bother about updates. Hi, slice. I once use a application which can disable any kexts. So voodoohda and applehda can stay together. by the way, I want to know is clover able to restart after kernel panic ? Link to comment Share on other sites More sharing options...
Slice Posted September 21, 2012 Share Posted September 21, 2012 Hi, slice. I once use a application which can disable any kexts. So voodoohda and applehda can stay together. by the way, I want to know is clover able to restart after kernel panic ? This is kernel function, not bootloader. sudo pmset autorestart 0 Link to comment Share on other sites More sharing options...
p.H Posted September 21, 2012 Share Posted September 21, 2012 This is kernel function, not bootloader. sudo pmset autorestart 0 well, I look into the pmset command in terminal it says like this. autorestart - automatic restart on [b]power loss[/b] (value = 0/1) does power loss equal to kernel panic ? Link to comment Share on other sites More sharing options...
Peter_sm Posted September 21, 2012 Share Posted September 21, 2012 After upgrade sleep is not working (using lid and from menu) Battery Icon is gone Anyone know a solution ? HP laptop DV8, see my sig //Peter Link to comment Share on other sites More sharing options...
artur_pt Posted September 21, 2012 Share Posted September 21, 2012 After upgrade sleep is not working (using lid and from menu) Battery Icon is gone Anyone know a solution ? HP laptop DV8, see my sig //Peter hello if u use any kext for the battery must install all again, and maybe resolve u sleep problem because the battery kext use another appleacpiplatform good hack Link to comment Share on other sites More sharing options...
nyolc8 Posted September 21, 2012 Share Posted September 21, 2012 Updated, then patched the AppleHDA.kext for my sound, and replaced ATI kexts with Exotic Patched ATI kexts. Speedstep seems working (Mhz/multiplier changing like it should, temps are normal, performance normal, fan RPMs are normal) without acpi rollback. Link to comment Share on other sites More sharing options...
Himlaklar Posted September 21, 2012 Share Posted September 21, 2012 Hi, I have "IOUSBFamily did not receive enough extra current for the SuperSpeed device (4-Port USB 3.0 Hub) at 0x14c00000, asked for 400mA but got 0 mA" error message from console. The USB port not charging iPad. Have to roll back to 10.8.1 IOUSBFamily.kext to fix the problem .. do u have to do that ? BTW, nice to see you here. hey i got mine running fine ... Yeah, i got an SC2 update today, now it works. seem to be related to 10.8.2 :-) Link to comment Share on other sites More sharing options...
alex95sv Posted September 21, 2012 Share Posted September 21, 2012 Hi, after update I got this issue: What can I do? Tried changing AppleACPIPlatform but it didn't work. Thanks in advance! Link to comment Share on other sites More sharing options...
rongu Posted September 21, 2012 Share Posted September 21, 2012 Hi, after update I got this issue: What can I do? Tried changing AppleACPIPlatform but it didn't work. Thanks in advance! did u try boot with boot flag -x -v -f ? Link to comment Share on other sites More sharing options...
LilKevin715 Posted September 21, 2012 Share Posted September 21, 2012 Installed via SW update on my Shuttle SG33G5 (vanilla install) and it went fine for the most part. Had to reinstall kexts for audio (ALC888) via kext wizard. Link to comment Share on other sites More sharing options...
alex95sv Posted September 21, 2012 Share Posted September 21, 2012 did u try boot with boot flag -x -v -f ? I can boot in safe boot without problems only with -x, but I can't boot normally. Link to comment Share on other sites More sharing options...
rongu Posted September 21, 2012 Share Posted September 21, 2012 I can boot in safe boot without problems only with -x, but I can't boot normally. Did you try rolling back AppleACPIPlatform.kext.? Tell me about your system, like cpu, board etc ... see if i can help BTW boot flag -x -v -f also rebuild extensions cache Link to comment Share on other sites More sharing options...
tdtran1025 Posted September 21, 2012 Share Posted September 21, 2012 Updated, then patched the AppleHDA.kext for my sound, and replaced ATI kexts with Exotic Patched ATI kexts. Speedstep seems working (Mhz/multiplier changing like it should, temps are normal, performance normal, fan RPMs are normal) without acpi rollback. What is Exotic Patched ATI kexts? Hi, after update I got this issue: What can I do? Tried changing AppleACPIPlatform but it didn't work. Thanks in advance! VooDoo kexts. On my desktop, it's sound. Perhaps on your laptop, it'll be the others, for sure, because of decendencies. Link to comment Share on other sites More sharing options...
CooSee Posted September 21, 2012 Share Posted September 21, 2012 sorry for this noobish question , but is the FB integration an Option or is it burned in the new Update ? greetings Link to comment Share on other sites More sharing options...
theconnactic Posted September 21, 2012 Share Posted September 21, 2012 You're asking if you can disable it? No, you can't. But don't worry, OSX won't post or share anything in Facebook without your knowledge or express will. Your privacy is absolutely safe. AFAIK, of course. Link to comment Share on other sites More sharing options...
alex95sv Posted September 21, 2012 Share Posted September 21, 2012 Did you try rolling back AppleACPIPlatform.kext.? Tell me about your system, like cpu, board etc ... see if i can help BTW boot flag -x -v -f also rebuild extensions cache Yes, I rolledback the AppleACPIPlatform, but it hangs on the exact same spot, so I think that's not the issue. I booted with -x -v -f, then tried normal boot, but it didnt work(it worked with the flags, but I can also boot only with -x ). My CPU is Intel Core2Duo 2.19GhZ; GPU - nVidia GeForce G105M w/ CUDA; 4GB RAM VooDoo kexts. On my desktop, it's sound. Perhaps on your laptop, it'll be the others, for sure, because of decendencies. I have only trackpad kext from VooDoo, nothing else. Could that be the issue? Link to comment Share on other sites More sharing options...
me@home Posted September 21, 2012 Share Posted September 21, 2012 Same here, all Ok updated from 10.8.1 to 10.8.2 only AppleHDA needed "a lttle help". Update for iphoto + aperture and all OK. So far I do like ML ! Link to comment Share on other sites More sharing options...
lulighttec Posted September 21, 2012 Share Posted September 21, 2012 Got a Dell XPS M1530 Laptop here, nVidia graphics, everything works fine in 10.8, but every time I try to update to 10.8.2 (Combo Update) I can't boot. It either has KP in normal mode, or in safe boot it hangs at PCI Configuration Begin. I don't even get the opportunity to roll back the ACPI kext. Any ideas? Here's some pics... First is normal, second is safe boot. I removed OemSMBIOS.kext too. No difference. Thanks, LULightTec Link to comment Share on other sites More sharing options...
artur_pt Posted September 21, 2012 Share Posted September 21, 2012 hello @LULightTec have u try -v UseKernelCache=No good hack Link to comment Share on other sites More sharing options...
theconnactic Posted September 21, 2012 Share Posted September 21, 2012 Hi, Lulighttec! Add NullCPUPowerManagement.kext and unixservice ACPI rollback to your S/L/E and boot with the flag npci=0x2000 (preferentially add the flag to your org.chameleon.boot.plist). You shouldn't have removed the oemSMBIOS driver: that's a bad advice from Tony's. Please report back if you can, for us to know if it worked. P.S.: Just for you to know sometimes the PCI Begin thing is not a real freeze, but just a loss of console output: if you take time, perhaps your system successfully boots in the end. Link to comment Share on other sites More sharing options...
Recommended Posts