ACDindia Posted February 7, 2013 Share Posted February 7, 2013 Hi Saranted! You can delete the NVDA* kexts when booting in safe mode... Simply navigate to S/L/E and delete all NVDA kexts and also Geforce kext... U do not need Graphics enabler if u have inserted the right Device id.... Edit the chameleon plist file accordingly... Set GraphicsEnabler=No Repair permissions.. Reboot. U shud b able to proceed. Is there a way we cud get the battery management?? I tried AppleACPIplatform n AppleBatteryManagement kexts which worked fine but had some KPs.... Removed them. 1 Link to comment Share on other sites More sharing options...
WaldMeister Posted February 7, 2013 Share Posted February 7, 2013 These work for me, no problems so far. Got them from here: http://www.insanelym...n/#entry1851700 Archief 3.zip Link to comment Share on other sites More sharing options...
Saranted Posted February 8, 2013 Share Posted February 8, 2013 finally i can boot in normal mode thanks for everything and special thanks for lejenk, i do again the steps that you give me and it works amazing very thanks for all your support Link to comment Share on other sites More sharing options...
WaldMeister Posted February 8, 2013 Share Posted February 8, 2013 The 384mb intel Graphics, is after the MB Pro late 2012 update, has nothing to do with the 10.8.2 update, had to reinstall, kept it in mind, and checked where it went wrong, just don't install that update, all is fine. Btw, anyone noticed the notebook running extremely hot? Primarly the HDD's? When i convert video's, after about 30 minutes, i can not hold the notebook on my lap anymore, around 80 degrees, the HDD's it is. Edit: Error in the DSDT. Edit: Also just noticed, usb 2.0 sticks are not recognized, 3.0 and other usb devices work, anyone else noticed something similar Reverting IOUSBFamily.kext solves it. Link to comment Share on other sites More sharing options...
ACDindia Posted February 10, 2013 Share Posted February 10, 2013 I have noticed a thing about my USB, i guess its working as USB 2.0! I have an external Toshiba 1TB HDD which has an LED indicator. This indicator is illuminated to White light when connected to USB 2.0 and Blue Light when connected to USB 3.0. On my Windows 8 installation, it shows Blue light when connected and on my Mac it shows white??? Link to comment Share on other sites More sharing options...
ThibaultAnd Posted February 10, 2013 Share Posted February 10, 2013 Hi everyone, I haven't been here for a while and I'm surprised and very happy that you are progressing very fast on this project ! Congrats ! Since I saw this, I decided to reinstall Mountain Lion and almost everything works (no nVidia ) : wifi atheros, sleep,etc... (Thanks to the kext and the DSDT Lejenk posted) By the way, @Lejenk, I tried your AppleHDA kext + Your DSDT (the DSDT is in the right location) and it didn't work : It seems like that it didn't recognize the audio in system profiler since I got "Intel High Definition Audio : 0" I had to use VoodooHDA to get the audio working, but it's better to use a patched AppleHDA (besides I have to adjust the volume in the voodooHDA settings...) Can you figure out what's wrong ? I used your last files and even tried to patch my own AppleHDA... I have the same IDT as you, 111d76e0 (Obvious since we have the same computer ) Thanks ! Link to comment Share on other sites More sharing options...
WaldMeister Posted February 10, 2013 Share Posted February 10, 2013 Hi ThibaultAnd, So it only shows the Intel High Definition Audio? Attached a screen of my profiler, the BoomDevice is an Audiobooster application called Boom. Did you remove the VoodooHDA when installing AppleHDA? And how did you install the AppleHDA? Attached also my latest DSDT. Extra included since the previous version: - Atheros 9285 - Intel HD4000 (No more need for efi string) Also cleaned up the last warning. Also, even if we have the same model, hardware can differ If the new files do not work, could you attach the codec.txt here? I have noticed a thing about my USB, i guess its working as USB 2.0! I have an external Toshiba 1TB HDD which has an LED indicator. This indicator is illuminated to White light when connected to USB 2.0 and Blue Light when connected to USB 3.0. On my Windows 8 installation, it shows Blue light when connected and on my Mac it shows white??? Did you install any usb kexts? USB 3.0 should work fine. DSDT.aml.zip AppleHDA.kext.zip Link to comment Share on other sites More sharing options...
ThibaultAnd Posted February 11, 2013 Share Posted February 11, 2013 Hi Lejenk I found my problem : I think it is Chameleon related because I don't have audio nor graphics (without EFI strings) when I boot with Chameleon (Installed on a USB stick because I have troubles on installing on the hard drive but I will figure it out by myself) but when I boot with the GRUB bootloader (also have Linux), it works (It boot in verbose mode but it is fine) Anyway, Thanks for every work you did ! 1 Link to comment Share on other sites More sharing options...
WaldMeister Posted February 11, 2013 Share Posted February 11, 2013 You could try Enoch, it has an audio injection module. Could also be some setting in the org.chameleon.boot.plist. Could you report back if you have solved the problem? Link to comment Share on other sites More sharing options...
ThibaultAnd Posted February 11, 2013 Share Posted February 11, 2013 I tried to install Enoch And it gave me a boot0:error My OSX partition (installed on a HDD) is active, I also tried Chameleon (or chameleon bootloader based like Chimera or Enoch as you suggested) manually and I get boot0:done then It quits and boot on the SDD :/ Any clues ? Thanks ! Link to comment Share on other sites More sharing options...
WaldMeister Posted February 11, 2013 Share Posted February 11, 2013 Is the /Extra folder present on the HDD? Link to comment Share on other sites More sharing options...
ACDindia Posted February 12, 2013 Share Posted February 12, 2013 Hey Lejenk! Thanks for the reply!! I am not using any IOUSBFamily kext..... Also, there is another problem, I tried computer sleep by closing the lid.... It went smooth... and instantly woke up when lid was lifted.. everything was working but the Trackpad... How can I fix this?? I am using Chimera Bootloader. Thanks in advance! Link to comment Share on other sites More sharing options...
WaldMeister Posted February 12, 2013 Share Posted February 12, 2013 Attached the controller i'm using. Works for me even after sleep. Don't know if it is because of the kext, but it is worth a try. Any managed to use UEFI boot? Called Dell today, first i had to do a bios update, well, i have A12, that could not be the problem, then he put me on hold, came back to me simply stating: "It does not work, and i can not help you, wait for a bios update." Well that was something i figured out already ¬¬ ApplePS2Controller.kext.zip Link to comment Share on other sites More sharing options...
ACDindia Posted February 12, 2013 Share Posted February 12, 2013 I will give that a try n report here.. BTW, about the USB 3 problem.... I have attached a screenshot on my USB device list.. It shows two USB High-Speed Bus (USB 2.0) and one USB Super-Speed Bus (USB 3.0).. The problem is that there are no Hubs listed under USB Super-Speed Bus... everything I have attached is under the two USB High-Speed Bus.. The 1.0TB external HDD that I had attached with the system is shown as USB 3.0 external drive but works as USB 2.0 as indicated by the LED.... Dunno where I am goin wrong.... ! Thanks for your continued help!! Screenshot: USB.tiff USB.tiff Link to comment Share on other sites More sharing options...
WaldMeister Posted February 12, 2013 Share Posted February 12, 2013 I don't even have the USB Super-Speed Bus listed. Think it is because i replace the IOUSBFamily.kext. I've looked at the speeds between my USB 2.0 and USB 3.0 devices, they all work as USB 2.0, will have to look in to it when i have time. No solution at the moment, sorry Link to comment Share on other sites More sharing options...
ACDindia Posted February 12, 2013 Share Posted February 12, 2013 Bro, your ApplePS2Controller works... :) thanks!! my trackpad is working after sleep :) Anyone else trying this, please note: It works if its in S/L/E and doesn't work from Extra (at least for me). About USB, no problem, we can manage that for the time...... hopefully u will get some time soon...!!! Thanks for the help.... Link to comment Share on other sites More sharing options...
WaldMeister Posted February 12, 2013 Share Posted February 12, 2013 Fix attached. I have set: USB Emulation > Disabled, in bios. (Don't know if this makes a difference) My USB 2.0 mass storage devices are not recognized, installed the vanilla iousbmasstorage.kext, will revert, hopefully USB 3.0 keeps working like this PXHCD.kext.zip Link to comment Share on other sites More sharing options...
ACDindia Posted February 12, 2013 Share Posted February 12, 2013 greatt! But USB 2.0 devices won't work with this Kext?? hmmmm.... thats a hard choice.... only USB 2.0 or Only USB 3.0..... Link to comment Share on other sites More sharing options...
WaldMeister Posted February 12, 2013 Share Posted February 12, 2013 greatt! But USB 2.0 devices won't work with this Kext?? hmmmm.... thats a hard choice.... only USB 2.0 or Only USB 3.0..... They will work if they work now, they do not work for me without the lion iousbfamily.kext, has nothing to do with the kext i just uploaded. Link to comment Share on other sites More sharing options...
ACDindia Posted February 12, 2013 Share Posted February 12, 2013 Bro this did not work... Also, the USB Super Speed Bus that was shown (although useless) in the System Information is gone....... This worked for you, so should I have to use the IOUSBFamily that you are using??? I installed your kext in S/L/E... Link to comment Share on other sites More sharing options...
WaldMeister Posted February 12, 2013 Share Posted February 12, 2013 Use the vanilla IOUSBFamily.kext, i'm using the one from 10.8.2 now, only problem is, it does not recognize the USB 2.0 storage devices. Attached the Vanilla kext. I also noticed, the USB device should not be connected when booting the system. It will either show as USB 2.0, or not show up at all. I'm trying to modify the kext now, to make both devices work. IOUSBFamily.kext.zip Link to comment Share on other sites More sharing options...
ACDindia Posted February 12, 2013 Share Posted February 12, 2013 Right... will wait for the fix.. Just to check, I removed your kext and restarted... Still that USB Super Speed Bus is not shown in the system information which was shown earlier... Link to comment Share on other sites More sharing options...
WaldMeister Posted February 12, 2013 Share Posted February 12, 2013 Did you replace any other files? Or switched settings in the Bios? Revert them also . Link to comment Share on other sites More sharing options...
ACDindia Posted February 12, 2013 Share Posted February 12, 2013 No I did not replace anything else, and neither did I change any BIOS setting... hmmmm....weird...it shud have reverted back to its original state...... Link to comment Share on other sites More sharing options...
WaldMeister Posted February 12, 2013 Share Posted February 12, 2013 File has a patched XHCI controller. Can't get my USB 2.0 to work on the 3.0 ports :/ IOUSBFamily.kext.zip Link to comment Share on other sites More sharing options...
Recommended Posts